class CfnSecurityGroupIngress (construct)
Language | Type name |
---|---|
.NET | Amazon.CDK.AWS.EC2.CfnSecurityGroupIngress |
Java | software.amazon.awscdk.services.ec2.CfnSecurityGroupIngress |
Python | aws_cdk.aws_ec2.CfnSecurityGroupIngress |
TypeScript | @aws-cdk/aws-ec2 » CfnSecurityGroupIngress |
Implements
IConstruct
, IConstruct
, IDependable
, IInspectable
A CloudFormation AWS::EC2::SecurityGroupIngress
.
Adds an inbound rule to a security group.
An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 CIDR address range, or from the instances associated with the specified security group.
You must specify only one of the following properties: CidrIp
, CidrIpv6
, SourcePrefixListId
, SourceSecurityGroupId
, or SourceSecurityGroupName
.
You specify a protocol for each rule (for example, TCP). For TCP and UDP, you must also specify a port or port range. For ICMP/ICMPv6, you must also specify the ICMP/ICMPv6 type and code. You can use -1 to mean all types or all codes.
You must specify a source security group ( SourcePrefixListId
, SourceSecurityGroupId
, or SourceSecurityGroupName
) or a CIDR range ( CidrIp
or CidrIpv6
). If you do not specify one of these parameters, the stack will launch successfully but the rule will not be added to the security group.
Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.
Example
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import * as ec2 from '@aws-cdk/aws-ec2';
const cfnSecurityGroupIngress = new ec2.CfnSecurityGroupIngress(this, 'MyCfnSecurityGroupIngress', {
ipProtocol: 'ipProtocol',
// the properties below are optional
cidrIp: 'cidrIp',
cidrIpv6: 'cidrIpv6',
description: 'description',
fromPort: 123,
groupId: 'groupId',
groupName: 'groupName',
sourcePrefixListId: 'sourcePrefixListId',
sourceSecurityGroupId: 'sourceSecurityGroupId',
sourceSecurityGroupName: 'sourceSecurityGroupName',
sourceSecurityGroupOwnerId: 'sourceSecurityGroupOwnerId',
toPort: 123,
});
Initializer
new CfnSecurityGroupIngress(scope: Construct, id: string, props: CfnSecurityGroupIngressProps)
Parameters
- scope
Construct
— - scope in which this resource is defined. - id
string
— - scoped id of the resource. - props
Cfn
— - resource properties.Security Group Ingress Props
Create a new AWS::EC2::SecurityGroupIngress
.
Construct Props
Name | Type | Description |
---|---|---|
ip | string | The IP protocol name ( tcp , udp , icmp , icmpv6 ) or number (see Protocol Numbers ). |
cidr | string | The IPv4 address range, in CIDR format. |
cidr | string | The IPv6 address range, in CIDR format. |
description? | string | Updates the description of an ingress (inbound) security group rule. |
from | number | The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. |
group | string | The ID of the security group. |
group | string | The name of the security group. |
source | string | The ID of a prefix list. |
source | string | The ID of the security group. |
source | string | [Default VPC] The name of the source security group. |
source | string | [nondefault VPC] The AWS account ID for the source security group, if the source security group is in a different account. |
to | number | The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. |
ipProtocol
Type:
string
The IP protocol name ( tcp
, udp
, icmp
, icmpv6
) or number (see Protocol Numbers ).
Use -1
to specify all protocols. When authorizing security group rules, specifying -1
or a protocol number other than tcp
, udp
, icmp
, or icmpv6
allows traffic on all ports, regardless of any port range you specify. For tcp
, udp
, and icmp
, you must specify a port range. For icmpv6
, the port range is optional; if you omit the port range, traffic for all types and codes is allowed.
cidrIp?
Type:
string
(optional)
The IPv4 address range, in CIDR format.
You must specify a source security group ( SourcePrefixListId
or SourceSecurityGroupId
) or a CIDR range ( CidrIp
or CidrIpv6
).
For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
cidrIpv6?
Type:
string
(optional)
The IPv6 address range, in CIDR format.
You must specify a source security group ( SourcePrefixListId
or SourceSecurityGroupId
) or a CIDR range ( CidrIp
or CidrIpv6
).
For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
description?
Type:
string
(optional)
Updates the description of an ingress (inbound) security group rule.
You can replace an existing description, or add a description to a rule that did not have one previously.
Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*
fromPort?
Type:
number
(optional)
The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1
indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
Use this for ICMP and any protocol that uses ports.
groupId?
Type:
string
(optional)
The ID of the security group.
groupName?
Type:
string
(optional)
The name of the security group.
Constraints: Up to 255 characters in length. Cannot start with sg-
.
Valid characters: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*
sourcePrefixListId?
Type:
string
(optional)
The ID of a prefix list.
sourceSecurityGroupId?
Type:
string
(optional)
The ID of the security group.
You must specify either the security group ID or the security group name. For security groups in a nondefault VPC, you must specify the security group ID.
sourceSecurityGroupName?
Type:
string
(optional)
[Default VPC] The name of the source security group.
You must specify either the security group ID or the security group name. You can't specify the group name in combination with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.
For security groups in a nondefault VPC, you must specify the group ID.
sourceSecurityGroupOwnerId?
Type:
string
(optional)
[nondefault VPC] The AWS account ID for the source security group, if the source security group is in a different account.
You can't specify this property with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.
If you specify SourceSecurityGroupName
or SourceSecurityGroupId
and that security group is owned by a different account than the account creating the stack, you must specify SourceSecurityGroupOwnerId
; otherwise, this property is optional.
toPort?
Type:
number
(optional)
The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1
indicates all ICMP/ICMPv6 codes for the specified ICMP type. If you specify all ICMP/ICMPv6 types, you must specify all codes.
Use this for ICMP and any protocol that uses ports.
Properties
Name | Type | Description |
---|---|---|
cfn | ICfn | Options for this resource, such as condition, update policy etc. |
cfn | { [string]: any } | |
cfn | string | AWS resource type. |
creation | string[] | |
ip | string | The IP protocol name ( tcp , udp , icmp , icmpv6 ) or number (see Protocol Numbers ). |
logical | string | The logical ID for this CloudFormation stack element. |
node | Construct | The construct tree node associated with this construct. |
ref | string | Return a string that will be resolved to a CloudFormation { Ref } for this element. |
stack | Stack | The stack in which this element is defined. |
cidr | string | The IPv4 address range, in CIDR format. |
cidr | string | The IPv6 address range, in CIDR format. |
description? | string | Updates the description of an ingress (inbound) security group rule. |
from | number | The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. |
group | string | The ID of the security group. |
group | string | The name of the security group. |
source | string | The ID of a prefix list. |
source | string | The ID of the security group. |
source | string | [Default VPC] The name of the source security group. |
source | string | [nondefault VPC] The AWS account ID for the source security group, if the source security group is in a different account. |
to | number | The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. |
static CFN_RESOURCE_TYPE_NAME | string | The CloudFormation resource type name for this resource class. |
cfnOptions
Type:
ICfn
Options for this resource, such as condition, update policy etc.
cfnProperties
Type:
{ [string]: any }
cfnResourceType
Type:
string
AWS resource type.
creationStack
Type:
string[]
ipProtocol
Type:
string
The IP protocol name ( tcp
, udp
, icmp
, icmpv6
) or number (see Protocol Numbers ).
Use -1
to specify all protocols. When authorizing security group rules, specifying -1
or a protocol number other than tcp
, udp
, icmp
, or icmpv6
allows traffic on all ports, regardless of any port range you specify. For tcp
, udp
, and icmp
, you must specify a port range. For icmpv6
, the port range is optional; if you omit the port range, traffic for all types and codes is allowed.
logicalId
Type:
string
The logical ID for this CloudFormation stack element.
The logical ID of the element is calculated from the path of the resource node in the construct tree.
To override this value, use overrideLogicalId(newLogicalId)
.
node
Type:
Construct
The construct tree node associated with this construct.
ref
Type:
string
Return a string that will be resolved to a CloudFormation { Ref }
for this element.
If, by any chance, the intrinsic reference of a resource is not a string, you could
coerce it to an IResolvable through Lazy.any({ produce: resource.ref })
.
stack
Type:
Stack
The stack in which this element is defined.
CfnElements must be defined within a stack scope (directly or indirectly).
cidrIp?
Type:
string
(optional)
The IPv4 address range, in CIDR format.
You must specify a source security group ( SourcePrefixListId
or SourceSecurityGroupId
) or a CIDR range ( CidrIp
or CidrIpv6
).
For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
cidrIpv6?
Type:
string
(optional)
The IPv6 address range, in CIDR format.
You must specify a source security group ( SourcePrefixListId
or SourceSecurityGroupId
) or a CIDR range ( CidrIp
or CidrIpv6
).
For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
description?
Type:
string
(optional)
Updates the description of an ingress (inbound) security group rule.
You can replace an existing description, or add a description to a rule that did not have one previously.
Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*
fromPort?
Type:
number
(optional)
The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.
A value of -1
indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
Use this for ICMP and any protocol that uses ports.
groupId?
Type:
string
(optional)
The ID of the security group.
groupName?
Type:
string
(optional)
The name of the security group.
Constraints: Up to 255 characters in length. Cannot start with sg-
.
Valid characters: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*
sourcePrefixListId?
Type:
string
(optional)
The ID of a prefix list.
sourceSecurityGroupId?
Type:
string
(optional)
The ID of the security group.
You must specify either the security group ID or the security group name. For security groups in a nondefault VPC, you must specify the security group ID.
sourceSecurityGroupName?
Type:
string
(optional)
[Default VPC] The name of the source security group.
You must specify either the security group ID or the security group name. You can't specify the group name in combination with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.
For security groups in a nondefault VPC, you must specify the group ID.
sourceSecurityGroupOwnerId?
Type:
string
(optional)
[nondefault VPC] The AWS account ID for the source security group, if the source security group is in a different account.
You can't specify this property with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.
If you specify SourceSecurityGroupName
or SourceSecurityGroupId
and that security group is owned by a different account than the account creating the stack, you must specify SourceSecurityGroupOwnerId
; otherwise, this property is optional.
toPort?
Type:
number
(optional)
The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.
A value of -1
indicates all ICMP/ICMPv6 codes for the specified ICMP type. If you specify all ICMP/ICMPv6 types, you must specify all codes.
Use this for ICMP and any protocol that uses ports.
static CFN_RESOURCE_TYPE_NAME
Type:
string
The CloudFormation resource type name for this resource class.
Methods
Name | Description |
---|---|
add | Syntactic sugar for addOverride(path, undefined) . |
add | Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned. |
add | Add a value to the CloudFormation Resource Metadata. |
add | Adds an override to the synthesized CloudFormation resource. |
add | Adds an override that deletes the value of a property from the resource definition. |
add | Adds an override to a resource property. |
apply | Sets the deletion policy of the resource based on the removal policy specified. |
get | Returns a token for an runtime attribute of this resource. |
get | Retrieve a value value from the CloudFormation Resource Metadata. |
inspect(inspector) | Examines the CloudFormation resource and discloses attributes. |
override | Overrides the auto-generated logical ID with a specific ID. |
to | Returns a string representation of this construct. |
protected render |
DeletionOverride(path)
addpublic addDeletionOverride(path: string): void
Parameters
- path
string
— The path of the value to delete.
Syntactic sugar for addOverride(path, undefined)
.
DependsOn(target)
addpublic addDependsOn(target: CfnResource): void
Parameters
- target
Cfn
Resource
Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.
Metadata(key, value)
addpublic addMetadata(key: string, value: any): void
Parameters
- key
string
- value
any
Add a value to the CloudFormation Resource Metadata.
See also: [https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.)
Override(path, value)
addpublic addOverride(path: string, value: any): void
Parameters
- path
string
— - The path of the property, you can use dot notation to override values in complex types. - value
any
— - The value.
Adds an override to the synthesized CloudFormation resource.
To add a
property override, either use addPropertyOverride
or prefix path
with
"Properties." (i.e. Properties.TopicName
).
If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.
To include a literal .
in the property name, prefix with a \
. In most
programming languages you will need to write this as "\\."
because the
\
itself will need to be escaped.
For example,
cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
would add the overrides
"Properties": {
"GlobalSecondaryIndexes": [
{
"Projection": {
"NonKeyAttributes": [ "myattribute" ]
...
}
...
},
{
"ProjectionType": "INCLUDE"
...
},
]
...
}
The value
argument to addOverride
will not be processed or translated
in any way. Pass raw JSON values in here with the correct capitalization
for CloudFormation. If you pass CDK classes or structs, they will be
rendered with lowercased key names, and CloudFormation will reject the
template.
PropertyDeletionOverride(propertyPath)
addpublic addPropertyDeletionOverride(propertyPath: string): void
Parameters
- propertyPath
string
— The path to the property.
Adds an override that deletes the value of a property from the resource definition.
PropertyOverride(propertyPath, value)
addpublic addPropertyOverride(propertyPath: string, value: any): void
Parameters
- propertyPath
string
— The path of the property. - value
any
— The value.
Adds an override to a resource property.
Syntactic sugar for addOverride("Properties.<...>", value)
.
RemovalPolicy(policy?, options?)
applypublic applyRemovalPolicy(policy?: RemovalPolicy, options?: RemovalPolicyOptions): void
Parameters
- policy
Removal
Policy - options
Removal
Policy Options
Sets the deletion policy of the resource based on the removal policy specified.
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you've removed it from the CDK application or because you've made a change that requires the resource to be replaced.
The resource can be deleted (RemovalPolicy.DESTROY
), or left in your AWS
account for data recovery and cleanup later (RemovalPolicy.RETAIN
).
Att(attributeName)
getpublic getAtt(attributeName: string): Reference
Parameters
- attributeName
string
— The name of the attribute.
Returns
Returns a token for an runtime attribute of this resource.
Ideally, use generated attribute accessors (e.g. resource.arn
), but this can be used for future compatibility
in case there is no generated attribute.
Metadata(key)
getpublic getMetadata(key: string): any
Parameters
- key
string
Returns
any
Retrieve a value value from the CloudFormation Resource Metadata.
See also: [https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.)
inspect(inspector)
public inspect(inspector: TreeInspector): void
Parameters
- inspector
Tree
— - tree inspector to collect and process attributes.Inspector
Examines the CloudFormation resource and discloses attributes.
LogicalId(newLogicalId)
overridepublic overrideLogicalId(newLogicalId: string): void
Parameters
- newLogicalId
string
— The new logical ID to use for this stack element.
Overrides the auto-generated logical ID with a specific ID.
String()
topublic toString(): string
Returns
string
Returns a string representation of this construct.
Properties(props)
protected renderprotected renderProperties(props: { [string]: any }): { [string]: any }
Parameters
- props
{ [string]: any }
Returns
{ [string]: any }