Class Ec2Service.Builder
- All Implemented Interfaces:
software.amazon.jsii.Builder<Ec2Service>
- Enclosing class:
Ec2Service
Ec2Service
.-
Method Summary
Modifier and TypeMethodDescriptionassignPublicIp
(Boolean assignPublicIp) Specifies whether the task's elastic network interface receives a public IP address.build()
capacityProviderStrategies
(List<? extends CapacityProviderStrategy> capacityProviderStrategies) A list of Capacity Provider strategies used to place a service.circuitBreaker
(DeploymentCircuitBreaker circuitBreaker) Whether to enable the deployment circuit breaker.cloudMapOptions
(CloudMapOptions cloudMapOptions) The options for configuring an Amazon ECS service to use service discovery.The name of the cluster that hosts the service.static Ec2Service.Builder
Specifies whether the service will use the daemon scheduling strategy.deploymentAlarms
(DeploymentAlarmConfig deploymentAlarms) The alarm(s) to monitor during deployment, and behavior to apply if at least one enters a state of alarm during the deployment or bake time.deploymentController
(DeploymentController deploymentController) Specifies which deployment controller to use for the service.desiredCount
(Number desiredCount) The desired number of instantiations of the task definition to keep running on the service.enableEcsManagedTags
(Boolean enableEcsManagedTags) Specifies whether to enable Amazon ECS managed tags for the tasks within the service.enableExecuteCommand
(Boolean enableExecuteCommand) Whether to enable the ability to execute into a container.healthCheckGracePeriod
(Duration healthCheckGracePeriod) The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.maxHealthyPercent
(Number maxHealthyPercent) The maximum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that can run in a service during a deployment.minHealthyPercent
(Number minHealthyPercent) The minimum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that must continue to run and remain healthy during a deployment.placementConstraints
(List<? extends PlacementConstraint> placementConstraints) The placement constraints to use for tasks in the service.placementStrategies
(List<? extends PlacementStrategy> placementStrategies) The placement strategies to use for tasks in the service.propagateTags
(PropagatedTagSource propagateTags) Specifies whether to propagate the tags from the task definition or the service to the tasks in the service.securityGroups
(List<? extends ISecurityGroup> securityGroups) The security groups to associate with the service.serviceConnectConfiguration
(ServiceConnectProps serviceConnectConfiguration) Configuration for Service Connect.serviceName
(String serviceName) The name of the service.taskDefinition
(TaskDefinition taskDefinition) The task definition to use for tasks in the service.taskDefinitionRevision
(TaskDefinitionRevision taskDefinitionRevision) Revision number for the task definition orlatest
to use the latest active task revision.volumeConfigurations
(List<? extends ServiceManagedVolume> volumeConfigurations) Configuration details for a volume used by the service.vpcSubnets
(SubnetSelection vpcSubnets) The subnets to associate with the service.
-
Method Details
-
create
@Stability(Stable) public static Ec2Service.Builder create(software.constructs.Construct scope, String id) - Parameters:
scope
- This parameter is required.id
- This parameter is required.- Returns:
- a new instance of
Ec2Service.Builder
.
-
cluster
The name of the cluster that hosts the service.- Parameters:
cluster
- The name of the cluster that hosts the service. This parameter is required.- Returns:
this
-
capacityProviderStrategies
@Stability(Stable) public Ec2Service.Builder capacityProviderStrategies(List<? extends CapacityProviderStrategy> capacityProviderStrategies) A list of Capacity Provider strategies used to place a service.Default: - undefined
- Parameters:
capacityProviderStrategies
- A list of Capacity Provider strategies used to place a service. This parameter is required.- Returns:
this
-
circuitBreaker
@Stability(Stable) public Ec2Service.Builder circuitBreaker(DeploymentCircuitBreaker circuitBreaker) Whether to enable the deployment circuit breaker.If this property is defined, circuit breaker will be implicitly enabled.
Default: - disabled
- Parameters:
circuitBreaker
- Whether to enable the deployment circuit breaker. This parameter is required.- Returns:
this
-
cloudMapOptions
The options for configuring an Amazon ECS service to use service discovery.Default: - AWS Cloud Map service discovery is not enabled.
- Parameters:
cloudMapOptions
- The options for configuring an Amazon ECS service to use service discovery. This parameter is required.- Returns:
this
-
deploymentAlarms
@Stability(Stable) public Ec2Service.Builder deploymentAlarms(DeploymentAlarmConfig deploymentAlarms) The alarm(s) to monitor during deployment, and behavior to apply if at least one enters a state of alarm during the deployment or bake time.Default: - No alarms will be monitored during deployment.
- Parameters:
deploymentAlarms
- The alarm(s) to monitor during deployment, and behavior to apply if at least one enters a state of alarm during the deployment or bake time. This parameter is required.- Returns:
this
-
deploymentController
@Stability(Stable) public Ec2Service.Builder deploymentController(DeploymentController deploymentController) Specifies which deployment controller to use for the service.For more information, see Amazon ECS Deployment Types
Default: - Rolling update (ECS)
- Parameters:
deploymentController
- Specifies which deployment controller to use for the service. This parameter is required.- Returns:
this
-
desiredCount
The desired number of instantiations of the task definition to keep running on the service.Default: - When creating the service, default is 1; when updating the service, default uses the current task number.
- Parameters:
desiredCount
- The desired number of instantiations of the task definition to keep running on the service. This parameter is required.- Returns:
this
-
enableEcsManagedTags
Specifies whether to enable Amazon ECS managed tags for the tasks within the service.For more information, see Tagging Your Amazon ECS Resources
Default: false
- Parameters:
enableEcsManagedTags
- Specifies whether to enable Amazon ECS managed tags for the tasks within the service. This parameter is required.- Returns:
this
-
enableExecuteCommand
Whether to enable the ability to execute into a container.Default: - undefined
- Parameters:
enableExecuteCommand
- Whether to enable the ability to execute into a container. This parameter is required.- Returns:
this
-
healthCheckGracePeriod
@Stability(Stable) public Ec2Service.Builder healthCheckGracePeriod(Duration healthCheckGracePeriod) The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.Default: - defaults to 60 seconds if at least one load balancer is in-use and it is not already set
- Parameters:
healthCheckGracePeriod
- The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started. This parameter is required.- Returns:
this
-
maxHealthyPercent
The maximum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that can run in a service during a deployment.Default: - 100 if daemon, otherwise 200
- Parameters:
maxHealthyPercent
- The maximum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that can run in a service during a deployment. This parameter is required.- Returns:
this
-
minHealthyPercent
The minimum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that must continue to run and remain healthy during a deployment.Default: - 0 if daemon, otherwise 50
- Parameters:
minHealthyPercent
- The minimum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that must continue to run and remain healthy during a deployment. This parameter is required.- Returns:
this
-
propagateTags
Specifies whether to propagate the tags from the task definition or the service to the tasks in the service.Valid values are: PropagatedTagSource.SERVICE, PropagatedTagSource.TASK_DEFINITION or PropagatedTagSource.NONE
Default: PropagatedTagSource.NONE
- Parameters:
propagateTags
- Specifies whether to propagate the tags from the task definition or the service to the tasks in the service. This parameter is required.- Returns:
this
-
serviceConnectConfiguration
@Stability(Stable) public Ec2Service.Builder serviceConnectConfiguration(ServiceConnectProps serviceConnectConfiguration) Configuration for Service Connect.Default: No ports are advertised via Service Connect on this service, and the service cannot make requests to other services via Service Connect.
- Parameters:
serviceConnectConfiguration
- Configuration for Service Connect. This parameter is required.- Returns:
this
-
serviceName
The name of the service.Default: - CloudFormation-generated name.
- Parameters:
serviceName
- The name of the service. This parameter is required.- Returns:
this
-
taskDefinitionRevision
@Stability(Stable) public Ec2Service.Builder taskDefinitionRevision(TaskDefinitionRevision taskDefinitionRevision) Revision number for the task definition orlatest
to use the latest active task revision.Default: - Uses the revision of the passed task definition deployed by CloudFormation
- Parameters:
taskDefinitionRevision
- Revision number for the task definition orlatest
to use the latest active task revision. This parameter is required.- Returns:
this
-
volumeConfigurations
@Stability(Stable) public Ec2Service.Builder volumeConfigurations(List<? extends ServiceManagedVolume> volumeConfigurations) Configuration details for a volume used by the service.This allows you to specify details about the EBS volume that can be attched to ECS tasks.
Default: - undefined
- Parameters:
volumeConfigurations
- Configuration details for a volume used by the service. This parameter is required.- Returns:
this
-
taskDefinition
The task definition to use for tasks in the service.[disable-awslint:ref-via-interface]
- Parameters:
taskDefinition
- The task definition to use for tasks in the service. This parameter is required.- Returns:
this
-
assignPublicIp
Specifies whether the task's elastic network interface receives a public IP address.If true, each task will receive a public IP address.
This property is only used for tasks that use the awsvpc network mode.
Default: false
- Parameters:
assignPublicIp
- Specifies whether the task's elastic network interface receives a public IP address. This parameter is required.- Returns:
this
-
daemon
Specifies whether the service will use the daemon scheduling strategy.If true, the service scheduler deploys exactly one task on each container instance in your cluster.
When you are using this strategy, do not specify a desired number of tasks or any task placement strategies.
Default: false
- Parameters:
daemon
- Specifies whether the service will use the daemon scheduling strategy. This parameter is required.- Returns:
this
-
placementConstraints
@Stability(Stable) public Ec2Service.Builder placementConstraints(List<? extends PlacementConstraint> placementConstraints) The placement constraints to use for tasks in the service.For more information, see Amazon ECS Task Placement Constraints.
Default: - No constraints.
- Parameters:
placementConstraints
- The placement constraints to use for tasks in the service. This parameter is required.- Returns:
this
-
placementStrategies
@Stability(Stable) public Ec2Service.Builder placementStrategies(List<? extends PlacementStrategy> placementStrategies) The placement strategies to use for tasks in the service.For more information, see Amazon ECS Task Placement Strategies.
Default: - No strategies.
- Parameters:
placementStrategies
- The placement strategies to use for tasks in the service. This parameter is required.- Returns:
this
-
securityGroups
@Stability(Stable) public Ec2Service.Builder securityGroups(List<? extends ISecurityGroup> securityGroups) The security groups to associate with the service.If you do not specify a security group, a new security group is created.
This property is only used for tasks that use the awsvpc network mode.
Default: - A new security group is created.
- Parameters:
securityGroups
- The security groups to associate with the service. This parameter is required.- Returns:
this
-
vpcSubnets
The subnets to associate with the service.This property is only used for tasks that use the awsvpc network mode.
Default: - Public subnets if `assignPublicIp` is set, otherwise the first available one of Private, Isolated, Public, in that order.
- Parameters:
vpcSubnets
- The subnets to associate with the service. This parameter is required.- Returns:
this
-
build
- Specified by:
build
in interfacesoftware.amazon.jsii.Builder<Ec2Service>
- Returns:
- a newly built instance of
Ec2Service
.
-