Class NetworkLoadBalancedEc2Service.Builder
- All Implemented Interfaces:
software.amazon.jsii.Builder<NetworkLoadBalancedEc2Service>
- Enclosing class:
NetworkLoadBalancedEc2Service
NetworkLoadBalancedEc2Service
.-
Method Summary
Modifier and TypeMethodDescriptionbuild()
capacityProviderStrategies
(List<? extends CapacityProviderStrategy> capacityProviderStrategies) A list of Capacity Provider strategies used to place a service.circuitBreaker
(DeploymentCircuitBreaker circuitBreaker) Whether to enable the deployment circuit breaker.cloudMapOptions
(CloudMapOptions cloudMapOptions) The options for configuring an Amazon ECS service to use service discovery.The name of the cluster that hosts the service.The number of cpu units used by the task.deploymentController
(DeploymentController deploymentController) Specifies which deployment controller to use for the service.desiredCount
(Number desiredCount) The desired number of instantiations of the task definition to keep running on the service.domainName
(String domainName) The domain name for the service, e.g.domainZone
(IHostedZone domainZone) The Route53 hosted zone for the domain, e.g.enableEcsManagedTags
(Boolean enableEcsManagedTags) Specifies whether to enable Amazon ECS managed tags for the tasks within the service.enableExecuteCommand
(Boolean enableExecuteCommand) Whether ECS Exec should be enabled.healthCheckGracePeriod
(Duration healthCheckGracePeriod) The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.ipAddressType
(IpAddressType ipAddressType) The type of IP addresses to use.listenerCertificate
(IListenerCertificate listenerCertificate) Listener certificate list of ACM cert ARNs.listenerPort
(Number listenerPort) Listener port of the network load balancer that will serve traffic to the service.loadBalancer
(INetworkLoadBalancer loadBalancer) The network load balancer that will serve traffic to the service.maxHealthyPercent
(Number maxHealthyPercent) The maximum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that can run in a service during a deployment.memoryLimitMiB
(Number memoryLimitMiB) The hard limit (in MiB) of memory to present to the container.memoryReservationMiB
(Number memoryReservationMiB) The soft limit (in MiB) of memory to reserve for the container.minHealthyPercent
(Number minHealthyPercent) The minimum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that must continue to run and remain healthy during a deployment.placementConstraints
(List<? extends PlacementConstraint> placementConstraints) The placement constraints to use for tasks in the service.placementStrategies
(List<? extends PlacementStrategy> placementStrategies) The placement strategies to use for tasks in the service.propagateTags
(PropagatedTagSource propagateTags) Specifies whether to propagate the tags from the task definition or the service to the tasks in the service.publicLoadBalancer
(Boolean publicLoadBalancer) Determines whether the Load Balancer will be internet-facing.recordType
(NetworkLoadBalancedServiceRecordType recordType) Specifies whether the Route53 record should be a CNAME, an A record using the Alias feature or no record at all.serviceName
(String serviceName) The name of the service.taskDefinition
(Ec2TaskDefinition taskDefinition) The task definition to use for tasks in the service.taskImageOptions
(NetworkLoadBalancedTaskImageOptions taskImageOptions) The properties required to create a new task definition.The VPC where the container instances will be launched or the elastic network interfaces (ENIs) will be deployed.
-
Method Details
-
create
@Stability(Stable) public static NetworkLoadBalancedEc2Service.Builder create(software.constructs.Construct scope, String id) - Parameters:
scope
- This parameter is required.id
- This parameter is required.- Returns:
- a new instance of
NetworkLoadBalancedEc2Service.Builder
.
-
capacityProviderStrategies
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder capacityProviderStrategies(List<? extends CapacityProviderStrategy> capacityProviderStrategies) A list of Capacity Provider strategies used to place a service.Default: - undefined
- Parameters:
capacityProviderStrategies
- A list of Capacity Provider strategies used to place a service. This parameter is required.- Returns:
this
-
circuitBreaker
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder circuitBreaker(DeploymentCircuitBreaker circuitBreaker) Whether to enable the deployment circuit breaker.If this property is defined, circuit breaker will be implicitly enabled.
Default: - disabled
- Parameters:
circuitBreaker
- Whether to enable the deployment circuit breaker. This parameter is required.- Returns:
this
-
cloudMapOptions
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder cloudMapOptions(CloudMapOptions cloudMapOptions) The options for configuring an Amazon ECS service to use service discovery.Default: - AWS Cloud Map service discovery is not enabled.
- Parameters:
cloudMapOptions
- The options for configuring an Amazon ECS service to use service discovery. This parameter is required.- Returns:
this
-
cluster
The name of the cluster that hosts the service.If a cluster is specified, the vpc construct should be omitted. Alternatively, you can omit both cluster and vpc.
Default: - create a new cluster; if both cluster and vpc are omitted, a new VPC will be created for you.
- Parameters:
cluster
- The name of the cluster that hosts the service. This parameter is required.- Returns:
this
-
deploymentController
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder deploymentController(DeploymentController deploymentController) Specifies which deployment controller to use for the service.For more information, see Amazon ECS Deployment Types
Default: - Rolling update (ECS)
- Parameters:
deploymentController
- Specifies which deployment controller to use for the service. This parameter is required.- Returns:
this
-
desiredCount
The desired number of instantiations of the task definition to keep running on the service.The minimum value is 1
Default: - The default is 1 for all new services and uses the existing service's desired count when updating an existing service.
- Parameters:
desiredCount
- The desired number of instantiations of the task definition to keep running on the service. This parameter is required.- Returns:
this
-
domainName
The domain name for the service, e.g. "api.example.com.".Default: - No domain name.
- Parameters:
domainName
- The domain name for the service, e.g. "api.example.com.". This parameter is required.- Returns:
this
-
domainZone
The Route53 hosted zone for the domain, e.g. "example.com.".Default: - No Route53 hosted domain zone.
- Parameters:
domainZone
- The Route53 hosted zone for the domain, e.g. "example.com.". This parameter is required.- Returns:
this
-
enableEcsManagedTags
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder enableEcsManagedTags(Boolean enableEcsManagedTags) Specifies whether to enable Amazon ECS managed tags for the tasks within the service.For more information, see Tagging Your Amazon ECS Resources
Default: false
- Parameters:
enableEcsManagedTags
- Specifies whether to enable Amazon ECS managed tags for the tasks within the service. This parameter is required.- Returns:
this
-
enableExecuteCommand
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder enableExecuteCommand(Boolean enableExecuteCommand) Whether ECS Exec should be enabled.Default: - false
- Parameters:
enableExecuteCommand
- Whether ECS Exec should be enabled. This parameter is required.- Returns:
this
-
healthCheckGracePeriod
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder healthCheckGracePeriod(Duration healthCheckGracePeriod) The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.Default: - defaults to 60 seconds if at least one load balancer is in-use and it is not already set
- Parameters:
healthCheckGracePeriod
- The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started. This parameter is required.- Returns:
this
-
ipAddressType
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder ipAddressType(IpAddressType ipAddressType) The type of IP addresses to use.If you want to add a UDP or TCP_UDP listener to the load balancer, you must choose IPv4.
Default: IpAddressType.IPV4
- Parameters:
ipAddressType
- The type of IP addresses to use. This parameter is required.- Returns:
this
- See Also:
-
listenerCertificate
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder listenerCertificate(IListenerCertificate listenerCertificate) Listener certificate list of ACM cert ARNs.If you provide a certificate, the listener's protocol will be TLS. If not, the listener's protocol will be TCP.
Default: - none
- Parameters:
listenerCertificate
- Listener certificate list of ACM cert ARNs. This parameter is required.- Returns:
this
-
listenerPort
Listener port of the network load balancer that will serve traffic to the service.Default: 80 or 443 with listenerCertificate provided
- Parameters:
listenerPort
- Listener port of the network load balancer that will serve traffic to the service. This parameter is required.- Returns:
this
-
loadBalancer
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder loadBalancer(INetworkLoadBalancer loadBalancer) The network load balancer that will serve traffic to the service.If the load balancer has been imported, the vpc attribute must be specified in the call to fromNetworkLoadBalancerAttributes().
[disable-awslint:ref-via-interface]
Default: - a new load balancer will be created.
- Parameters:
loadBalancer
- The network load balancer that will serve traffic to the service. This parameter is required.- Returns:
this
-
maxHealthyPercent
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder maxHealthyPercent(Number maxHealthyPercent) The maximum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that can run in a service during a deployment.Default: - 100 if daemon, otherwise 200
- Parameters:
maxHealthyPercent
- The maximum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that can run in a service during a deployment. This parameter is required.- Returns:
this
-
minHealthyPercent
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder minHealthyPercent(Number minHealthyPercent) The minimum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that must continue to run and remain healthy during a deployment.Default: - 0 if daemon, otherwise 50
- Parameters:
minHealthyPercent
- The minimum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that must continue to run and remain healthy during a deployment. This parameter is required.- Returns:
this
-
propagateTags
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder propagateTags(PropagatedTagSource propagateTags) Specifies whether to propagate the tags from the task definition or the service to the tasks in the service.Tags can only be propagated to the tasks within the service during service creation.
Default: - none
- Parameters:
propagateTags
- Specifies whether to propagate the tags from the task definition or the service to the tasks in the service. This parameter is required.- Returns:
this
-
publicLoadBalancer
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder publicLoadBalancer(Boolean publicLoadBalancer) Determines whether the Load Balancer will be internet-facing.Default: true
- Parameters:
publicLoadBalancer
- Determines whether the Load Balancer will be internet-facing. This parameter is required.- Returns:
this
-
recordType
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder recordType(NetworkLoadBalancedServiceRecordType recordType) Specifies whether the Route53 record should be a CNAME, an A record using the Alias feature or no record at all.This is useful if you need to work with DNS systems that do not support alias records.
Default: NetworkLoadBalancedServiceRecordType.ALIAS
- Parameters:
recordType
- Specifies whether the Route53 record should be a CNAME, an A record using the Alias feature or no record at all. This parameter is required.- Returns:
this
-
serviceName
The name of the service.Default: - CloudFormation-generated name.
- Parameters:
serviceName
- The name of the service. This parameter is required.- Returns:
this
-
taskImageOptions
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder taskImageOptions(NetworkLoadBalancedTaskImageOptions taskImageOptions) The properties required to create a new task definition.One of taskImageOptions or taskDefinition must be specified.
Default: - none
- Parameters:
taskImageOptions
- The properties required to create a new task definition. This parameter is required.- Returns:
this
-
vpc
The VPC where the container instances will be launched or the elastic network interfaces (ENIs) will be deployed.If a vpc is specified, the cluster construct should be omitted. Alternatively, you can omit both vpc and cluster.
Default: - uses the VPC defined in the cluster or creates a new VPC.
- Parameters:
vpc
- The VPC where the container instances will be launched or the elastic network interfaces (ENIs) will be deployed. This parameter is required.- Returns:
this
-
cpu
The number of cpu units used by the task.Valid values, which determines your range of valid values for the memory parameter:
256 (.25 vCPU) - Available memory values: 0.5GB, 1GB, 2GB
512 (.5 vCPU) - Available memory values: 1GB, 2GB, 3GB, 4GB
1024 (1 vCPU) - Available memory values: 2GB, 3GB, 4GB, 5GB, 6GB, 7GB, 8GB
2048 (2 vCPU) - Available memory values: Between 4GB and 16GB in 1GB increments
4096 (4 vCPU) - Available memory values: Between 8GB and 30GB in 1GB increments
This default is set in the underlying FargateTaskDefinition construct.
Default: none
- Parameters:
cpu
- The number of cpu units used by the task. This parameter is required.- Returns:
this
-
memoryLimitMiB
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder memoryLimitMiB(Number memoryLimitMiB) The hard limit (in MiB) of memory to present to the container.If your container attempts to exceed the allocated memory, the container is terminated.
At least one of memoryLimitMiB and memoryReservationMiB is required.
Default: - No memory limit.
- Parameters:
memoryLimitMiB
- The hard limit (in MiB) of memory to present to the container. This parameter is required.- Returns:
this
-
memoryReservationMiB
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder memoryReservationMiB(Number memoryReservationMiB) The soft limit (in MiB) of memory to reserve for the container.When system memory is under contention, Docker attempts to keep the container memory within the limit. If the container requires more memory, it can consume up to the value specified by the Memory property or all of the available memory on the container instance—whichever comes first.
At least one of memoryLimitMiB and memoryReservationMiB is required.
Default: - No memory reserved.
- Parameters:
memoryReservationMiB
- The soft limit (in MiB) of memory to reserve for the container. This parameter is required.- Returns:
this
-
placementConstraints
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder placementConstraints(List<? extends PlacementConstraint> placementConstraints) The placement constraints to use for tasks in the service.For more information, see Amazon ECS Task Placement Constraints.
Default: - No constraints.
- Parameters:
placementConstraints
- The placement constraints to use for tasks in the service. This parameter is required.- Returns:
this
-
placementStrategies
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder placementStrategies(List<? extends PlacementStrategy> placementStrategies) The placement strategies to use for tasks in the service.For more information, see Amazon ECS Task Placement Strategies.
Default: - No strategies.
- Parameters:
placementStrategies
- The placement strategies to use for tasks in the service. This parameter is required.- Returns:
this
-
taskDefinition
@Stability(Stable) public NetworkLoadBalancedEc2Service.Builder taskDefinition(Ec2TaskDefinition taskDefinition) The task definition to use for tasks in the service. TaskDefinition or TaskImageOptions must be specified, but not both..[disable-awslint:ref-via-interface]
Default: - none
- Parameters:
taskDefinition
- The task definition to use for tasks in the service. TaskDefinition or TaskImageOptions must be specified, but not both.. This parameter is required.- Returns:
this
-
build
- Specified by:
build
in interfacesoftware.amazon.jsii.Builder<NetworkLoadBalancedEc2Service>
- Returns:
- a newly built instance of
NetworkLoadBalancedEc2Service
.
-