CreatePullRequest - AWS CodeCommit

CreatePullRequest

Creates a pull request in the specified repository.

Request Syntax

{ "clientRequestToken": "string", "description": "string", "targets": [ { "destinationReference": "string", "repositoryName": "string", "sourceReference": "string" } ], "title": "string" }

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

The request accepts the following data in JSON format.

clientRequestToken

A unique, client-generated idempotency token that, when provided in a request, ensures the request cannot be repeated with a changed parameter. If a request is received with the same parameters and a token is included, the request returns information about the initial request that used that token.

Note

The AWSSDKs prepopulate client request tokens. If you are using an AWSSDK, an idempotency token is created for you.

Type: String

Required: No

description

A description of the pull request.

Type: String

Length Constraints: Maximum length of 10240.

Required: No

targets

The targets for the pull request, including the source of the code to be reviewed (the source branch) and the destination where the creator of the pull request intends the code to be merged after the pull request is closed (the destination branch).

Type: Array of Target objects

Required: Yes

title

The title of the pull request. This title is used to identify the pull request to other users in the repository.

Type: String

Length Constraints: Maximum length of 150.

Required: Yes

Response Syntax

{ "pullRequest": { "approvalRules": [ { "approvalRuleContent": "string", "approvalRuleId": "string", "approvalRuleName": "string", "creationDate": number, "lastModifiedDate": number, "lastModifiedUser": "string", "originApprovalRuleTemplate": { "approvalRuleTemplateId": "string", "approvalRuleTemplateName": "string" }, "ruleContentSha256": "string" } ], "authorArn": "string", "clientRequestToken": "string", "creationDate": number, "description": "string", "lastActivityDate": number, "pullRequestId": "string", "pullRequestStatus": "string", "pullRequestTargets": [ { "destinationCommit": "string", "destinationReference": "string", "mergeBase": "string", "mergeMetadata": { "isMerged": boolean, "mergeCommitId": "string", "mergedBy": "string", "mergeOption": "string" }, "repositoryName": "string", "sourceCommit": "string", "sourceReference": "string" } ], "revisionId": "string", "title": "string" } }

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

pullRequest

Information about the newly created pull request.

Type: PullRequest object

Errors

For information about the errors that are common to all actions, see Common Errors.

ClientRequestTokenRequiredException

A client request token is required. A client request token is an unique, client-generated idempotency token that, when provided in a request, ensures the request cannot be repeated with a changed parameter. If a request is received with the same parameters and a token is included, the request returns information about the initial request that used that token.

HTTP Status Code: 400

EncryptionIntegrityChecksFailedException

An encryption integrity check failed.

HTTP Status Code: 500

EncryptionKeyAccessDeniedException

An encryption key could not be accessed.

HTTP Status Code: 400

EncryptionKeyDisabledException

The encryption key is disabled.

HTTP Status Code: 400

EncryptionKeyNotFoundException

No encryption key was found.

HTTP Status Code: 400

EncryptionKeyUnavailableException

The encryption key is not available.

HTTP Status Code: 400

IdempotencyParameterMismatchException

The client request token is not valid. Either the token is not in a valid format, or the token has been used in a previous request and cannot be reused.

HTTP Status Code: 400

InvalidClientRequestTokenException

The client request token is not valid.

HTTP Status Code: 400

InvalidDescriptionException

The pull request description is not valid. Descriptions cannot be more than 1,000 characters.

HTTP Status Code: 400

InvalidReferenceNameException

The specified reference name format is not valid. Reference names must conform to the Git references format (for example, refs/heads/main). For more information, see Git Internals - Git References or consult your Git documentation.

HTTP Status Code: 400

InvalidRepositoryNameException

A specified repository name is not valid.

Note

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

HTTP Status Code: 400

InvalidTargetException

The target for the pull request is not valid. A target must contain the full values for the repository name, source branch, and destination branch for the pull request.

HTTP Status Code: 400

InvalidTargetsException

The targets for the pull request is not valid or not in a valid format. Targets are a list of target objects. Each target object must contain the full values for the repository name, source branch, and destination branch for a pull request.

HTTP Status Code: 400

InvalidTitleException

The title of the pull request is not valid. Pull request titles cannot exceed 100 characters in length.

HTTP Status Code: 400

MaximumOpenPullRequestsExceededException

You cannot create the pull request because the repository has too many open pull requests. The maximum number of open pull requests for a repository is 1,000. Close one or more open pull requests, and then try again.

HTTP Status Code: 400

MultipleRepositoriesInPullRequestException

You cannot include more than one repository in a pull request. Make sure you have specified only one repository name in your request, and then try again.

HTTP Status Code: 400

ReferenceDoesNotExistException

The specified reference does not exist. You must provide a full commit ID.

HTTP Status Code: 400

ReferenceNameRequiredException

A reference name is required, but none was provided.

HTTP Status Code: 400

ReferenceTypeNotSupportedException

The specified reference is not a supported type.

HTTP Status Code: 400

RepositoryDoesNotExistException

The specified repository does not exist.

HTTP Status Code: 400

RepositoryNameRequiredException

A repository name is required, but was not specified.

HTTP Status Code: 400

SourceAndDestinationAreSameException

The source branch and destination branch for the pull request are the same. You must specify different branches for the source and destination.

HTTP Status Code: 400

TargetRequiredException

A pull request target is required. It cannot be empty or null. A pull request target must contain the full values for the repository name, source branch, and destination branch for the pull request.

HTTP Status Code: 400

TargetsRequiredException

An array of target objects is required. It cannot be empty or null.

HTTP Status Code: 400

TitleRequiredException

A pull request title is required. It cannot be empty or null.

HTTP Status Code: 400

Examples

Example

This example illustrates one usage of CreatePullRequest.

Sample Request

>POST / HTTP/1.1 Host: codecommit.us-east-1.amazonaws.com Accept-Encoding: identity Content-Length: 350 X-Amz-Target: CodeCommit_20150413.CreatePullRequest X-Amz-Date: 20171025T132023Z User-Agent: aws-cli/1.11.187 Python/2.7.9 Windows/8 Content-Type: application/x-amz-json-1.1 Authorization: AWS4-HMAC-SHA256 Credential=AKIAI44QH8DHBEXAMPLE/20171025/us-east-1/codecommit/aws4_request, SignedHeaders=content-type;host;user-agent;x-amz-date;x-amz-target, Signature=8d9b5998EXAMPLE { "clientRequestToken": "123Example", "description": "A code review of the new feature I just added to the service.", "targets": [ { "destinationReference": "refs/heads/main", "repositoryName": "MyDemoRepo", "sourceReference": "refs/heads/jane-branch" } ], "title": "Pronunciation difficulty analyzer" }

Sample Response

HTTP/1.1 200 OK x-amzn-RequestId: 0728aaa8-EXAMPLE Content-Type: application/x-amz-json-1.1 Content-Length: 847 Date: Wed, 25 Oct 2017 20:20:13 GMT { "pullRequest": { "approvalRules": [ { "approvalRuleContent": "{\"Version\": \"2018-11-08\",\"DestinationReferences\": [\"refs/heads/main\"],\"Statements\": [{\"Type\": \"Approvers\",\"NumberOfApprovalsNeeded\": 2,\"ApprovalPoolMembers\": [\"arn:aws:sts::123456789012:assumed-role/CodeCommitReview/*\"]}]}", "approvalRuleId": "dd8b17fe-EXAMPLE", "approvalRuleName": "2-approver-rule-for-main", "creationDate": 1571356106.936, "lastModifiedDate": 571356106.936, "lastModifiedUser": "arn:aws:iam::123456789012:user/Mary_Major", "originApprovalRuleTemplate": { "approvalRuleTemplateId": "dd8b17fe-EXAMPLE", "approvalRuleTemplateName": "2-approver-rule-for-main" }, "ruleContentSha256": "4711b576EXAMPLE" } ], "authorArn": "arn:aws:iam::123456789012:user/Jane_Doe", "description": "A code review of the new feature I just added to the service.", "title": "Pronunciation difficulty analyzer", "pullRequestTargets": [ { "destinationCommit": "5d036259EXAMPLE", "destinationReference": "refs/heads/main", "repositoryName": "MyDemoRepo", "sourceCommit": "317f8570EXAMPLE", "sourceReference": "refs/heads/jane-branch", "mergeMetadata": { "isMerged": false } } ], "lastActivityDate": 1508962823.285, "pullRequestId": "42", "clientRequestToken": "123Example", "pullRequestStatus": "OPEN", "creationDate": 1508962823.285 } }

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: