nitro-cli run-enclave - AWS

nitro-cli run-enclave

Launches a new enclave. This command partitions the specified number of vCPUs and the amount of memory from the Amazon EC2 parent instance to create the enclave. You also need to provide an enclave image file (.eif) that contains the operating system and the applications that you want to run inside the enclave.

Important

If you attempt to start an enclave with an enclave image file that is signed with a certificate that is no longer valid, the nitro-cli run-enclave command fails with errors E36, E39, and E11.

Syntax

nitro-cli run-enclave [--enclave-name enclave_name] [--cpu-count number_of_vcpus --cpu-ids list_of_vcpu_ids] --memory amount_of_memory_in_MiB --eif-path path_to_enclave_image_file [--enclave-cid cid_number] [--debug-mode] [--attach-console]

Alternatively, pass the enclave settings using a JSON file as follows.

nitro-cli run-enclave --config config_file.json

The following is an example JSON file.

{ "enclave_name": enclave_name, "cpu_count": number_of_vcpus, "cpu_ids": list_of_vcpu_ids, "memory_mib": amount_of_memory_in_MiB, "eif_path": "path_to_enclave_image_file", "enclave_cid": cid_number, "debug_mode": true|false, "attach_console": true|false }

Options

--enclave-name

A unique name for the enclave. You can use this name to reference the enclave when using the nitro-cli console and nitro-cli terminate-enclave commands.

If you do not specify a name, the name of the enclave image file (.eif) is used as the enclave name.

Type: String

Required: No

--cpu-count

The number of vCPUs to allocate to the enclave.

Note
  • Amazon EC2 instances support multithreading, which enables multiple threads to run concurrently on a single CPU core. Each thread is represented as a virtual CPU (vCPU) on the instance. For more information about vCPUs, see Optimize CPU options in the Amazon EC2 User Guide.

  • If the parent instance is enabled for multithreading, you must specify an even number of vCPUs.

The number of vCPUs that you can allocate to an enclave depends on the size and configuration of the parent instance. If the parent instance is enabled for multithreading, you must leave at least 2 vCPUs for the parent instance. If multithreading is not enabled, you must leave at least 1 vCPU for the parent instance. For example, if your parent instance has 4 vCPUs and it is enabled for multithreading, you can allocate up to 2 vCPUs to the enclave.

You must specify either --cpu-count or --cpu-ids. If you specify this option, omit --cpu-ids.

Type: Integer

Required: Conditional

--cpu-ids

The IDs of the vCPUs to allocate to the enclave.

Note
  • Amazon EC2 instances support multithreading, which enables multiple threads to run concurrently on a single CPU core. Each thread is represented as a virtual CPU (vCPU) on the instance. For more information about vCPUs, see Optimize CPU options in the Amazon EC2 User Guide.

  • If the parent instance is enabled for multithreading, you must specify an even number of vCPUs.

The number of vCPUs that you can allocate to an enclave depends on the size and configuration of the parent instance. If the parent instance is enabled for multithreading, you must leave at least 2 vCPUs for the parent instance. If multithreading is not enabled, you must leave at least 1 vCPU for the parent instance. For example, if your parent instance has 4 vCPUs and it is enabled for multithreading, you can allocate up to 2 vCPUs to the enclave.

You must specify either --cpu-count or --cpu-ids. If you specify this option, omit --cpu-count.

Type: String

Required: Conditional

--memory

The amount of memory (in MiB) to allocate to the enclave.

The amount of memory that you can allocate to an enclave depends on the size of the parent instance and the applications that you intend to run on it. The specified amount of memory cannot exceed the amount of memory provided by the parent instance. You must leave enough memory for the applications running on the parent instance. You must allocate a minimum of 64 MiB of memory to the enclave.

Type: Integer (MiB)

Required: Yes

--eif-path

The path to the enclave image file.

Type: String

Required: Yes

--enclave-cid

The context identifier (CID) for the enclave. The CID is the socket address used by the vsock socket. Only CIDs of 4 and higher can be specified. If you omit this option, a random CID is allocated to the enclave.

Type: Integer

Required: No

--debug-mode

Indicates whether to run the enclave in debug mode. Specify this option to enable debug mode, or omit it to disable debug mode.

If you enable debug mode, you can view the enclave's console in read-only mode using the nitro-cli console command. Enclaves booted in debug mode generate attestation documents with PCRs that are made up entirely of zeros.

Required: No

--attach-console

Attach the enclave console immediately after starting the enclave.

--config

The path to a .json configuration file that specifies the paramaters for the enclave. If you specify --config, the specified json file must include the required and optional paramaters as described above, and you must not specify any other parameters in the command itself.

Type: String

Required: No

Output

EnclaveName

The unique name of the enclave.

Type: String

EnclaveID

The unique ID of the enclave.

Type: String

ProcessID

The process identifier (PID) of the process holding the enclave's resources.

Type: String

EnclaveCID

The context ID (CID) of the enclave.

Type: Integer

NumberOfCPUs

The number of vCPUs allocated to the enclave from the parent instance.

Type: Integer

CPUIDs

The IDs of the vCPUs allocated to the enclave from the parent instance.

Type: String

MemoryMiB

The amount of memory (in MiB) allocated to the enclave from the parent instance.

Type: Integer

Examples

Example 1: Inline parameters

The following example creates an enclave with 2 vCPUs, 1600 MiB of memory, and a context ID of 10. It also uses an enclave image file named sample.eif, which is located in the same directory from which the command is being run.

Command

nitro-cli run-enclave --enclave-name my-enclave --cpu-count 2 --memory 1600 --eif-path sample.eif --enclave-cid 10

Output

Start allocating memory... Started enclave with enclave-cid: 10, memory: 1600 MiB, cpu-ids: [1, 3] { "EnclaveName": "my_enclave", "EnclaveID": "i-abc12345def67890a-enc9876abcd543210ef12", "ProcessID": 12345, "EnclaveCID": 10, "NumberOfCPUs": 2, "CPUIDs": [ 1, 3 ], "MemoryMiB": 1600 }

Example 2: Config file

The following example creates an enclave with 2 vCPUs, 1600 MiB of memory, and a context ID of 10. It also uses an enclave image file named sample.eif, which is located in the same directory from which the command is being run.

Command

nitro-cli run-enclave --config enclave_config.json

The following is an example of the enclave_config.json file.

{ "enclave_name": "my_enclave", "cpu_count": 2, "memory_mib": 1600, "eif_path": "sample.eif", "enclave_cid": 10, "debug_mode": true }

Output

Start allocating memory... Started enclave with enclave-cid: 10, memory: 1600 MiB, cpu-ids: [1, 3] { "EnclaveName": "my_enclave", "EnclaveID": "i-abc12345def67890a-enc9876abcd543210ef12", "ProcessID": 12345, "EnclaveCID": 10, "NumberOfCPUs": 2, "CPUIDs": [ 1, 3 ], "MemoryMiB": 1600 }