SAP OData connector for Amazon AppFlow
The Amazon AppFlow SAP OData connector provides the ability to fetch, create, and update records exposed by SAP S/4HANA and SAP on premises systems through OData APIs.
With this connector, you can connect Amazon AppFlow to your OData services, including those that
extract data from SAP applications that use the Operational Data Provisioning (ODP) framework.
These applications are called ODP providers. For more information about how OData services can
extract ODP data in SAP, see ODP-Based Data Extraction via OData
When you connect Amazon AppFlow to ODP providers, you can create flows that run full data transfers or incremental updates. Incremental updates for ODP data are efficient because they transfer only those records that changed since the prior flow run.
Amazon AppFlow support for SAP OData
With the SAP OData connector, Amazon AppFlow supports SAP as follows.
- Supported as a data source?
-
Yes. You can use Amazon AppFlow to transfer data from SAP.
- Supported as a data destination?
-
Amazon AppFlow supports SAP OData as a destination, but not for ODP data. You can use Amazon AppFlow to transfer data to an OData service, but you can't transfer data to an ODP provider.
Before you begin
To use Amazon AppFlow to transfer data from SAP OData to supported destinations, you must meet these requirements:
-
Your SAP NetWeaver stack version must be 7.40 SP02 or above.
-
You must enable catalog service for service discovery.
-
OData V2.0: The OData V2.0 catalog service(s) can be enabled in your SAP Gateway via transaction /IWFND/MAINT_SERVICE .
-
OData V4.0: The OData V4.0 catalog services can be enabled in your SAP Gateway environment by publishing the service groups /IWFND/CONFIG or as described in the SAP documentation relevant to your gateway version.
-
-
You must enable OData V2.0/V4.0 services in your SAP Gateway. The OData V2.0 services can be enabled via transaction /IWFND/MAINT_SERVICE and V4.0 services can be published via transaction /IWFND/V4_ADMIN.
-
Your SAP OData service must support client side pagination/query options such as $top and $skip. It must also support system query option $count.
-
Amazon AppFlow supports following authentication mechanisms:
-
Basic - Supported for OData V2.0 and OData V4.0
-
OAuth 2.0 - Supported for only OData V2.0. You must enable OAuth 2.0 for the OData service and register the OAuth client per SAP documentation and set the authorized redirect URL as follows:
-
https://console.aws.amazon.com/appflow/oauth for the us-east-1 Region
-
https://region.console.aws.amazon.com/appflow/oauth for all other Regions
-
-
-
You must enable secure setup for connecting over HTTPS.
-
You must provide required authorization for the user in SAP to discover the services and extract data using SAP OData services. Please refer to the security documentation provided by SAP.
ODP Requirements
Before you can transfer data from an ODP provider, you need to meet the following requirements:
-
You have an SAP NetWeaver AS ABAP instance.
-
Your SAP NetWeaver instance contains an ODP provider that you want to transfer data from. ODP providers include:
-
SAP DataSources (Transaction code RSO2)
-
SAP Core Data Services ABAP CDS Views
-
SAP BW or SAP BW/4HANA systems (InfoObject, DataStore Object)
-
Real-time replication of Tables and DB-Views from SAP Source System via SAP Landscape Replication Server (SAP SLT)
-
SAP HANA Information Views in SAP ABAP based Sources
-
-
Your SAP NetWeaver instance has the SAP Gateway Foundation component.
-
You have created an OData service that extracts data from your ODP provider. To create the OData service, you use the SAP Gateway Service Builder. To access your ODP data, Amazon AppFlow calls this service by using the OData API. For more information, see Generating a Service for Extracting ODP Data via OData
in the SAP BW/4HANA documentation. -
To generate an OData service based on ODP data sources, SAP Gateway Foundation must be installed locally in your ERP/BW stack or in a hub configuration.
-
For your ERP/BW applications, the SAP NetWeaver AS ABAP stack must be at 7.50 SP02 or above.
-
For the hub system (SAP Gateway), the SAP NetWeaver AS ABAP of the hub system must be 7.50 SP01 or above for remote hub setup.
-
Private Connection Requirements
Before you can create a private connection to SAP, you need to meet the following requirements:
-
You need to create VPC Endpoint Service for your SAP OData instance running in a VPC. This VPC endpoint service must have Amazon AppFlow service principal appflow.amazonaws.com as allowed principal and must be available in at least more than 50% AZs in a region.
-
When creating connection using OAuth, your Authorization Code URL must be reachable by the network from where the connection is being setup. This is because OAuth connection involves browser interaction with SAP Login Page which cannot happen over AWS PrivateLink. The network from where the connection is being setup must be connected to SAP OData instance running in a VPC so that hostname of authorization code url can be resolved. Alternately, you can choose to make your Authorization Code URL available over public internet so that console user interaction can happen from any network.
-
For OAuth, in addition to Application Host URL, your Authorization Tokens URL must also be available behind VPC Endpoint Service to fetch Access/Refresh tokens over private network.
-
For OAuth, you must set your OAuthCode expiry to at least 5 minutes.
Connecting Amazon AppFlow to your SAP account
To connect Amazon AppFlow to your SAP account, provide details about your SAP OData service so that Amazon AppFlow can access your data. If you haven't yet configured your SAP OData service for Amazon AppFlow integration, see Before you begin.
To create an SAP OData connection
Sign in to the AWS Management Console and open the Amazon AppFlow console at https://console.aws.amazon.com/appflow/
. -
In the navigation pane on the left, choose Connections.
-
On the Manage connections page, for Connectors, choose SAP OData.
-
Choose Create connection.
-
In the Connect to SAP OData window, enter the following information:
-
Under Application Host URL, enter your Application host url. This application host url must be accessible over public internet for non PrivateLink connection.
-
Under Application Service Path, enter your catalog service path. e.g./sap/opu/odata/iwfnd/catalogservice;v=2. Amazon AppFlow doesn’t accept specific object path.
-
Under Port Number, enter your port number.
-
Under Client Number, enter your 3 digit client number. Acceptable values are [001-999]. e.g.010
-
Under Logon Language, enter your two character logon language. e.g. EN.
-
(Optional) To use private connection for data transfer, under AWS PrivateLink service name, enter your VPC Endpoint (PrivateLink) service name. e.g. com.amazonaws.vpce.us-east-1.vpce-svc-xxxxxxxxxxxxxx
-
Select your preferred Authentication Mode.
-
If Basic,
-
Under User name, enter your useraname.
-
Under Password, enter your password.
-
-
If OAuth2,
-
Under Authorization Code URL, enter your authorization code URL.
-
Under Authorization Tokens URL, enter your authorization token URL.
-
Under OAuth Scopes, enter your OAuth scopes separated by space. e.g./IWFND/SG_MED_CATALOG_0002 ZAPI_SALES_ORDER_SRV_0001
-
Under Client ID, enter your client id .
-
Under Client Secret, enter your client secret .
-
-
-
Optionally, under Data encryption, choose Customize encryption settings (advanced) if you want to encrypt your data with a customer managed key in the AWS Key Management Service (AWS KMS).
By default, Amazon AppFlow encrypts your data with a KMS key that AWS creates, uses, and manages for you. Choose this option if you want to encrypt your data with your own KMS key instead.
Amazon AppFlow always encrypts your data during transit and at rest. For more information, see Data protection in Amazon AppFlow.
If you want to use a KMS key from the current AWS account, select this key under Choose an AWS KMS key. If you want to use a KMS key from a different AWS account, enter the Amazon Resource Name (ARN) for that key.
-
Under Connection name, specify a name for your connection.
-
Choose Continue.
-
If using OAuth, you will be redirected to the SAP login page. When prompted, grant Amazon AppFlow permissions to access your SAP account.
-
On the Manage connections page, your new connection appears in the Connections table. When you create a flow that uses SAP OData as the data source, you can select this connection.
If you chose to enable PrivateLink, note the following:
-
Amazon AppFlow creates AWS PrivateLink Endpoint (if not already present) connection to your VPC Endpoint Service before any metadata/data transfer calls can be made to your SAP OData instance over private network. AWS PrivateLink Endpoint creation can take 3-5 minutes, and until its created, profile status would be PENDING. While the connection status is PENDING, you are unable to transfer SAP OData objects with a flow.
-
If your VPC Endpoint Service has Acceptance Required setting set to true, you will need to accept the connection in the AWS account which has VPC Endpoint service for AWS PrivateLink endpoint provisioning to start.
-
Once the AWS PrivateLink Endpoint connection is established, Amazon AppFlow fetches (only for OAuth) access/refresh tokens using the authCode, makes a test connection call over private network, and finally changes connection status from PENDING to CREATED.
-
If for any reason private connection creation fails, connection status would change to FAILED.
Transferring data from SAP OData with a flow
To transfer data from SAP OData, create an Amazon AppFlow flow, and choose SAP OData as the data source. For the steps to create a flow, see Creating flows in Amazon AppFlow.
When you configure the flow, choose which data object you want to transfer. If the data object originates from an ODP provider, you can configure the flow so that it runs efficient incremental updates that transfer changed records only.
Transferring ODP data
When you create a flow that transfers an ODP data object, you can configure the flow to run incremental or full data transfers.
Incremental ODP data transfers
When you create a flow that transfers ODP data incrementally, it does the following:
-
It subscribes to the operational delta queue of your ODP provider. This queue provides Amazon AppFlow with delta tokens, which indicate changes made to the provider's records in SAP.
-
For the initial flow run, it performs a full data transfer. It obtains all available records from your ODP provider, except for any that you omit by adding filters to your flow configuration.
-
For subsequent flow runs, it performs incremental data transfers. By using the information provided by the delta tokens, it transfers only those records that changed after the last flow run.
When you create an SAP OData flow in the Amazon AppFlow console, you can configure it to transfer data incrementally in the Flow trigger section, where you do the following:
-
Choose Run flow on schedule.
-
Use the scheduling fields to specify when the flow begins, how often it repeats, and when it ends.
-
Under Transfer mode, choose Incremental transfer.
For ODP data objects specifically, the console requires no additional input. This behavior differs from SAP data objects that don't come from an ODP provider. For those objects, you must specify a source timestamp field that Amazon AppFlow uses to identify new or changed records. For ODP data, no such timestamp is necessary because Amazon AppFlow uses the information that's provided by the delta token that it receives from the operational delta queue.
Important
When you create an incremental flow for an ODP data object, the flow creates a subscription to the operational delta queue for that object. Although Amazon AppFlow creates these subscriptions, it doesn't administer them on your behalf. Keep the following subscription behaviors in mind to prevent unwanted effects:
-
When a flow subscribes to a queue, it also removes all prior subscriptions to that queue. If you previously created any scheduled flows that transfer the same object, delete those flows. They no longer receive delta tokens, and they stop performing incremental data transfers. For any individual ODP object, maintain only one scheduled flow at a time.
-
When you delete a flow that subscribes to an operational delta queue, that operation does not delete the subscription itself. You can only delete the subscription by using the SAP system to do so.
Full ODP data transfers
You can create flows that run full data transfers of your ODP data. For these flows, Amazon AppFlow does not create subscriptions to operational delta queues like it does for incremental flows.
When you create an SAP OData flow in the Amazon AppFlow console, you can configure it to run full data transfers in the Flow trigger section, where you do the following:
-
Under Choose how to trigger the flow, do either of the following:
-
Choose Run on demand. After you create an on-demand flow, you run it manually by choosing Run flow on its details page in the Amazon AppFlow console.
-
Choose Run flow on schedule and define your schedule:.
-
Use the scheduling fields to specify when the flow begins, how often it repeats, and when it ends.
-
For Transfer mode, choose Full transfer.
Note
To create a flow that runs full data transfers, the frequency that you choose must be no more frequent than Daily. If it is more frequent, then you won't be able to choose Full transfer.
-
-
Advanced capabilities for the SAP OData connector
For the SAP OData connector, Amazon AppFlow supports a couple unique capabilities that are unavailable with other destination-enabled connectors. With it, you can:
-
Capture the SAP success response when you create a new record.
-
Create deep entities with the SAP OData deep insert feature. For more information about this feature, see Deep Insert
in the SAP Gateway Foundation documentation.
You can use these capabilities individually or in combination. For example, you can capture SAP's success response when you insert a deep entity.
To enable these capabilities, complete the following steps.
To capture the SAP success response for new records
-
Create an Amazon S3 bucket. The bucket must be in the same AWS Region as the flow that you create for your SAP OData connector. For the steps to create a bucket, see Creating a bucket in the Amazon S3 User Guide.
-
Configure the flow by following the steps in Creating flows in Amazon AppFlow, but do one additional step:
-
On the Configure flow page, under Response handling, select the bucket that you created. The SAP success response payload is delivered to this bucket when finish creating your flow.
-
To create SAP deep entities
-
Generate a JSON Lines input file that defines one deep entity per line, as shown by the following example.
-
Create an Amazon S3 bucket. The bucket must be in the same AWS Region as the flow that you create for your SAP OData connector. For the steps to create a bucket, see Creating a bucket in the Amazon S3 User Guide.
-
Upload your deep entities input file to the bucket that you created. For the steps to upload a file, see Uploading objects in the Amazon S3 User Guide.
-
Configure the flow by following the steps in Creating flows in Amazon AppFlow, but do one alternate step:
-
On the Map data fields page, under Mapping method, choose Passthrough fields without modification.
Note
When you choose this option, the console disables the options under Source to destination field mapping. With this option, you don't define mappings in the console. Instead, the fields in your input file must match the fields that you use in SAP.
-
Transferring data with concurrent processes
When you configure a flow that transfers OData records from an SAP instance, you can speed up the transfer by setting multiple concurrent processes. Each concurrent process is a query that retrieves a batch of records from your SAP instance. When the flow transfers your data, it runs these processes at the same time. As a result, the flow uses multiple parallel threads that can transfer large datasets more quickly.
Note
Amazon AppFlow supports concurrent processes only for flows that do the following:
-
Transfer OData records.
-
Transfer from SAP as the data source.
Amazon AppFlow doesn’t support this feature for ODP records or for flows that transfer to SAP as the data destination.
To transfer your data with concurrent processes
Configure the flow by following the steps in Creating flows in Amazon AppFlow, and do these additional steps:
-
On the Configure flow page, choose your SAP OData connector under Source details.
-
In the Source details section, under Additional settings, set the following options:
- Batch size
-
The maximum number of records that Amazon AppFlow receives in each page of the response from your SAP application. For transfers of OData records, the maximum page size is 3,000. For transfers of data that comes from an ODP provider, the maximum page size is 10,000.
- Maximum number of concurrent processes
-
The maximum number of processes that Amazon AppFlow runs at the same time when it retrieves your data. The default value is one. You can specify up to 10.
![Additional settings panel with batch size and concurrent processes options for SAP data transfer.](/images/appflow/latest/userguide/images/sapodata-concurrent-processes.png)
When the flow runs, Amazon AppFlow calculates how many processes it needs by dividing the number of records in your instance with the batch size. If the number is less than the maximum, the flow runs the processes only once, and it runs only as many processes as it needs. If the number exceeds the maximum, the flow runs the processes multiple times, and it doesn’t exceed the maximum at any one time.
Notes
-
When you use SAP OData as a source, you can run schedule-triggered flows at a maximum frequency of one flow runs per minute.
-
If you have a private ConnectorProfile for a VPC endpoint service, and you try to create another private ConnectorProfile for the same VPC endpoint service, Amazon AppFlow will re-use the already created private connection, and thus you would not need to wait for private connection provisioning to complete to list and choose SAP OData object.
-
Amazon AppFlow allows at max 1000 flow executions at a time per AWS account. If you choose to run multiple flows against the same SAP OData instance, you need to accordingly scale your instance.
Supported destinations
When you create a flow that uses SAP OData as the data source, you can set the destination to any of the following connectors:
-
Amazon Connect
-
Amazon Redshift
-
Amazon S3
-
SAP OData
You can also set the destination to any custom connectors that you
create with the Amazon AppFlow Custom Connector SDKs for
Python
Related resources
-
Setting up SAP Gateway
in SAP documentation.