Tutorial: Demonstrate remote actions (jobs) with the AWS IoT Device Client
In these tutorials, you'll configure and deploy jobs to your Raspberry Pi to demonstrate how you can send remote operations to your IoT devices.
To start this tutorial:
-
Have your local host computer an Raspberry Pi configured as used in the previous section.
-
If you haven't completed the tutorial in the previous section, you can try this tutorial by using the Raspberry Pi with a microSD card that has the image you saved after you installed the AWS IoT Device Client in (Optional) Save the microSD card image.
-
If you have run this demo before, review Step 2: Cleaning up your AWS account after building demos with the AWS IoT Device Client to delete all AWS IoT resources that you created in earlier runs to avoid duplicate resource errors.
This tutorial takes about 45 minutes to complete.
When you're finished with this topic:
-
You'll have demonstrated different ways that your IoT device can use the AWS IoT Core to run remote operations that are managed by AWS IoT .
Required equipment:
-
Your local development and testing environment that you tested in a previous section
-
The Raspberry Pi that you tested in a previous section
-
The microSD memory card from the Raspberry Pi that you tested in a previous section
Procedures in this tutorial
