Table Of Contents

Feedback

User Guide

First time using the AWS CLI? See the User Guide for help getting started.

Note: You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . mediaconnect ]

create-flow

Description

Creates a new flow. The request must include one source. The request optionally can include outputs (up to 50) and entitlements (up to 50).

See also: AWS API Documentation

See 'aws help' for descriptions of global parameters.

Synopsis

  create-flow
[--availability-zone <value>]
[--entitlements <value>]
--name <value>
[--outputs <value>]
[--source <value>]
[--source-failover-config <value>]
[--sources <value>]
[--vpc-interfaces <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]

Options

--availability-zone (string) The Availability Zone that you want to create the flow in. These options are limited to the Availability Zones within the current AWS Region.

--entitlements (list) The entitlements that you want to grant on a flow.(structure)

The entitlements that you want to grant on a flow.

DataTransferSubscriberFeePercent -> (integer)

Percentage from 0-100 of the data transfer cost to be billed to the subscriber.

Description -> (string)

A description of the entitlement. This description appears only on the AWS Elemental MediaConnect console and will not be seen by the subscriber or end user.

Encryption -> (structure)

The type of encryption that will be used on the output that is associated with this entitlement.

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

EntitlementStatus -> (string)

An indication of whether the new entitlement should be enabled or disabled as soon as it is created. If you don’t specify the entitlementStatus field in your request, MediaConnect sets it to ENABLED.

Name -> (string)

The name of the entitlement. This value must be unique within the current flow.

Subscribers -> (list)

The AWS account IDs that you want to share your content with. The receiving accounts (subscribers) will be allowed to create their own flows using your content as the source.

(string)

Shorthand Syntax:

DataTransferSubscriberFeePercent=integer,Description=string,Encryption={Algorithm=string,ConstantInitializationVector=string,DeviceId=string,KeyType=string,Region=string,ResourceId=string,RoleArn=string,SecretArn=string,Url=string},EntitlementStatus=string,Name=string,Subscribers=string,string ...

JSON Syntax:

[
  {
    "DataTransferSubscriberFeePercent": integer,
    "Description": "string",
    "Encryption": {
      "Algorithm": "aes128"|"aes192"|"aes256",
      "ConstantInitializationVector": "string",
      "DeviceId": "string",
      "KeyType": "speke"|"static-key",
      "Region": "string",
      "ResourceId": "string",
      "RoleArn": "string",
      "SecretArn": "string",
      "Url": "string"
    },
    "EntitlementStatus": "ENABLED"|"DISABLED",
    "Name": "string",
    "Subscribers": ["string", ...]
  }
  ...
]

--name (string) The name of the flow.

--outputs (list) The outputs that you want to add to this flow.(structure)

The output that you want to add to this flow.

CidrAllowList -> (list)

The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

(string)

Description -> (string)

A description of the output. This description appears only on the AWS Elemental MediaConnect console and will not be seen by the end user.

Destination -> (string)

The IP address from which video will be sent to output destinations.

Encryption -> (structure)

The type of key used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

MaxLatency -> (integer)

The maximum latency in milliseconds for Zixi-based streams.

Name -> (string)

The name of the output. This value must be unique within the current flow.

Port -> (integer)

The port to use when content is distributed to this output.

Protocol -> (string)

The protocol to use for the output.

RemoteId -> (string)

The remote ID for the Zixi-pull output stream.

SmoothingLatency -> (integer)

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

StreamId -> (string)

The stream ID that you want to use for this transport. This parameter applies only to Zixi-based streams.

VpcInterfaceAttachment -> (structure)

The name of the VPC interface attachment to use for this output.

VpcInterfaceName -> (string)

The name of the VPC interface to use for this output.

Shorthand Syntax:

CidrAllowList=string,string,Description=string,Destination=string,Encryption={Algorithm=string,ConstantInitializationVector=string,DeviceId=string,KeyType=string,Region=string,ResourceId=string,RoleArn=string,SecretArn=string,Url=string},MaxLatency=integer,Name=string,Port=integer,Protocol=string,RemoteId=string,SmoothingLatency=integer,StreamId=string,VpcInterfaceAttachment={VpcInterfaceName=string} ...

JSON Syntax:

[
  {
    "CidrAllowList": ["string", ...],
    "Description": "string",
    "Destination": "string",
    "Encryption": {
      "Algorithm": "aes128"|"aes192"|"aes256",
      "ConstantInitializationVector": "string",
      "DeviceId": "string",
      "KeyType": "speke"|"static-key",
      "Region": "string",
      "ResourceId": "string",
      "RoleArn": "string",
      "SecretArn": "string",
      "Url": "string"
    },
    "MaxLatency": integer,
    "Name": "string",
    "Port": integer,
    "Protocol": "zixi-push"|"rtp-fec"|"rtp"|"zixi-pull"|"rist",
    "RemoteId": "string",
    "SmoothingLatency": integer,
    "StreamId": "string",
    "VpcInterfaceAttachment": {
      "VpcInterfaceName": "string"
    }
  }
  ...
]

--source (structure) The settings for the source of the flow.Decryption -> (structure)

The type of encryption that is used on the content ingested from this source.

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

Description -> (string)

A description for the source. This value is not used or seen outside of the current AWS Elemental MediaConnect account.

EntitlementArn -> (string)

The ARN of the entitlement that allows you to subscribe to this flow. The entitlement is set by the flow originator, and the ARN is generated as part of the originator's flow.

IngestPort -> (integer)

The port that the flow will be listening on for incoming content.

MaxBitrate -> (integer)

The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.

MaxLatency -> (integer)

The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.

Name -> (string)

The name of the source.

Protocol -> (string)

The protocol that is used by the source.

StreamId -> (string)

The stream ID that you want to use for this transport. This parameter applies only to Zixi-based streams.

VpcInterfaceName -> (string)

The name of the VPC interface to use for this source.

WhitelistCidr -> (string)

The range of IP addresses that should be allowed to contribute content to your source. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Shorthand Syntax:

Decryption={Algorithm=string,ConstantInitializationVector=string,DeviceId=string,KeyType=string,Region=string,ResourceId=string,RoleArn=string,SecretArn=string,Url=string},Description=string,EntitlementArn=string,IngestPort=integer,MaxBitrate=integer,MaxLatency=integer,Name=string,Protocol=string,StreamId=string,VpcInterfaceName=string,WhitelistCidr=string

JSON Syntax:

{
  "Decryption": {
    "Algorithm": "aes128"|"aes192"|"aes256",
    "ConstantInitializationVector": "string",
    "DeviceId": "string",
    "KeyType": "speke"|"static-key",
    "Region": "string",
    "ResourceId": "string",
    "RoleArn": "string",
    "SecretArn": "string",
    "Url": "string"
  },
  "Description": "string",
  "EntitlementArn": "string",
  "IngestPort": integer,
  "MaxBitrate": integer,
  "MaxLatency": integer,
  "Name": "string",
  "Protocol": "zixi-push"|"rtp-fec"|"rtp"|"zixi-pull"|"rist",
  "StreamId": "string",
  "VpcInterfaceName": "string",
  "WhitelistCidr": "string"
}

--source-failover-config (structure) The settings for source failoverRecoveryWindow -> (integer)

Search window time to look for dash-7 packets

State -> (string)

Shorthand Syntax:

RecoveryWindow=integer,State=string

JSON Syntax:

{
  "RecoveryWindow": integer,
  "State": "ENABLED"|"DISABLED"
}

--sources (list) (structure)

The settings for the source of the flow.

Decryption -> (structure)

The type of encryption that is used on the content ingested from this source.

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

Description -> (string)

A description for the source. This value is not used or seen outside of the current AWS Elemental MediaConnect account.

EntitlementArn -> (string)

The ARN of the entitlement that allows you to subscribe to this flow. The entitlement is set by the flow originator, and the ARN is generated as part of the originator's flow.

IngestPort -> (integer)

The port that the flow will be listening on for incoming content.

MaxBitrate -> (integer)

The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.

MaxLatency -> (integer)

The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.

Name -> (string)

The name of the source.

Protocol -> (string)

The protocol that is used by the source.

StreamId -> (string)

The stream ID that you want to use for this transport. This parameter applies only to Zixi-based streams.

VpcInterfaceName -> (string)

The name of the VPC interface to use for this source.

WhitelistCidr -> (string)

The range of IP addresses that should be allowed to contribute content to your source. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Shorthand Syntax:

Decryption={Algorithm=string,ConstantInitializationVector=string,DeviceId=string,KeyType=string,Region=string,ResourceId=string,RoleArn=string,SecretArn=string,Url=string},Description=string,EntitlementArn=string,IngestPort=integer,MaxBitrate=integer,MaxLatency=integer,Name=string,Protocol=string,StreamId=string,VpcInterfaceName=string,WhitelistCidr=string ...

JSON Syntax:

[
  {
    "Decryption": {
      "Algorithm": "aes128"|"aes192"|"aes256",
      "ConstantInitializationVector": "string",
      "DeviceId": "string",
      "KeyType": "speke"|"static-key",
      "Region": "string",
      "ResourceId": "string",
      "RoleArn": "string",
      "SecretArn": "string",
      "Url": "string"
    },
    "Description": "string",
    "EntitlementArn": "string",
    "IngestPort": integer,
    "MaxBitrate": integer,
    "MaxLatency": integer,
    "Name": "string",
    "Protocol": "zixi-push"|"rtp-fec"|"rtp"|"zixi-pull"|"rist",
    "StreamId": "string",
    "VpcInterfaceName": "string",
    "WhitelistCidr": "string"
  }
  ...
]

--vpc-interfaces (list) The VPC interfaces you want on the flow.(structure)

Desired VPC Interface for a Flow

Name -> (string)

The name of the VPC Interface. This value must be unique within the current flow.

RoleArn -> (string)

Role Arn MediaConnect can assumes to create ENIs in customer's account

SecurityGroupIds -> (list)

Security Group IDs to be used on ENI.

(string)

SubnetId -> (string)

Subnet must be in the AZ of the Flow

Shorthand Syntax:

Name=string,RoleArn=string,SecurityGroupIds=string,string,SubnetId=string ...

JSON Syntax:

[
  {
    "Name": "string",
    "RoleArn": "string",
    "SecurityGroupIds": ["string", ...],
    "SubnetId": "string"
  }
  ...
]

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See 'aws help' for descriptions of global parameters.

Examples

To create a flow

The following create-flow example creates a flow with the specified configuration.

aws mediaconnect create-flow \
    --availability-zone us-west-2c \
    --name ExampleFlow \
    --source Description='Example source, backup',IngestPort=1055,Name=BackupSource,Protocol=rtp,WhitelistCidr=10.24.34.0/23

Output:

{
    "Flow": {
        "FlowArn": "arn:aws:mediaconnect:us-east-1:123456789012:flow:1-23aBC45dEF67hiJ8-12AbC34DE5fG:ExampleFlow",
        "AvailabilityZone": "us-west-2c",
        "EgressIp": "54.245.71.21",
        "Source": {
            "IngestPort": 1055,
            "SourceArn": "arn:aws:mediaconnect:us-east-1:123456789012:source:2-3aBC45dEF67hiJ89-c34de5fG678h:BackupSource",
            "Transport": {
                "Protocol": "rtp",
                "MaxBitrate": 80000000
            },
            "Description": "Example source, backup",
            "IngestIp": "54.245.71.21",
            "WhitelistCidr": "10.24.34.0/23",
            "Name": "mySource"
        },
        "Entitlements": [],
        "Name": "ExampleFlow",
        "Outputs": [],
        "Status": "STANDBY",
        "Description": "Example source, backup"
    }
}

For more information, see Creating a Flow in the AWS Elemental MediaConnect User Guide.

Output

Flow -> (structure)

The settings for a flow, including its source, outputs, and entitlements.

AvailabilityZone -> (string)

The Availability Zone that you want to create the flow in. These options are limited to the Availability Zones within the current AWS.

Description -> (string)

A description of the flow. This value is not used or seen outside of the current AWS Elemental MediaConnect account.

EgressIp -> (string)

The IP address from which video will be sent to output destinations.

Entitlements -> (list)

The entitlements in this flow.

(structure)

The settings for a flow entitlement.

DataTransferSubscriberFeePercent -> (integer)

Percentage from 0-100 of the data transfer cost to be billed to the subscriber.

Description -> (string)

A description of the entitlement.

Encryption -> (structure)

The type of encryption that will be used on the output that is associated with this entitlement.

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

EntitlementArn -> (string)

The ARN of the entitlement.

EntitlementStatus -> (string)

An indication of whether the entitlement is enabled.

Name -> (string)

The name of the entitlement.

Subscribers -> (list)

The AWS account IDs that you want to share your content with. The receiving accounts (subscribers) will be allowed to create their own flow using your content as the source.

(string)

FlowArn -> (string)

The Amazon Resource Name (ARN), a unique identifier for any AWS resource, of the flow.

Name -> (string)

The name of the flow.

Outputs -> (list)

The outputs in this flow.

(structure)

The settings for an output.

DataTransferSubscriberFeePercent -> (integer)

Percentage from 0-100 of the data transfer cost to be billed to the subscriber.

Description -> (string)

A description of the output.

Destination -> (string)

The address where you want to send the output.

Encryption -> (structure)

The type of key used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

EntitlementArn -> (string)

The ARN of the entitlement on the originator''s flow. This value is relevant only on entitled flows.

MediaLiveInputArn -> (string)

The input ARN of the AWS Elemental MediaLive channel. This parameter is relevant only for outputs that were added by creating a MediaLive input.

Name -> (string)

The name of the output. This value must be unique within the current flow.

OutputArn -> (string)

The ARN of the output.

Port -> (integer)

The port to use when content is distributed to this output.

Transport -> (structure)

Attributes related to the transport stream that are used in the output.

CidrAllowList -> (list)

The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

(string)

MaxBitrate -> (integer)

The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.

MaxLatency -> (integer)

The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.

Protocol -> (string)

The protocol that is used by the source or output.

RemoteId -> (string)

The remote ID for the Zixi-pull stream.

SmoothingLatency -> (integer)

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

StreamId -> (string)

The stream ID that you want to use for this transport. This parameter applies only to Zixi-based streams.

VpcInterfaceAttachment -> (structure)

The name of the VPC interface attachment to use for this output.

VpcInterfaceName -> (string)

The name of the VPC interface to use for this output.

Source -> (structure)

The settings for the source of the flow.

DataTransferSubscriberFeePercent -> (integer)

Percentage from 0-100 of the data transfer cost to be billed to the subscriber.

Decryption -> (structure)

The type of encryption that is used on the content ingested from this source.

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

Description -> (string)

A description for the source. This value is not used or seen outside of the current AWS Elemental MediaConnect account.

EntitlementArn -> (string)

The ARN of the entitlement that allows you to subscribe to content that comes from another AWS account. The entitlement is set by the content originator and the ARN is generated as part of the originator's flow.

IngestIp -> (string)

The IP address that the flow will be listening on for incoming content.

IngestPort -> (integer)

The port that the flow will be listening on for incoming content.

Name -> (string)

The name of the source.

SourceArn -> (string)

The ARN of the source.

Transport -> (structure)

Attributes related to the transport stream that are used in the source.

CidrAllowList -> (list)

The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

(string)

MaxBitrate -> (integer)

The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.

MaxLatency -> (integer)

The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.

Protocol -> (string)

The protocol that is used by the source or output.

RemoteId -> (string)

The remote ID for the Zixi-pull stream.

SmoothingLatency -> (integer)

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

StreamId -> (string)

The stream ID that you want to use for this transport. This parameter applies only to Zixi-based streams.

VpcInterfaceName -> (string)

The name of the VPC Interface this Source is configured with.

WhitelistCidr -> (string)

The range of IP addresses that should be allowed to contribute content to your source. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

SourceFailoverConfig -> (structure)

The settings for source failover

RecoveryWindow -> (integer)

Search window time to look for dash-7 packets

State -> (string)

Sources -> (list)

(structure)

The settings for the source of the flow.

DataTransferSubscriberFeePercent -> (integer)

Percentage from 0-100 of the data transfer cost to be billed to the subscriber.

Decryption -> (structure)

The type of encryption that is used on the content ingested from this source.

Algorithm -> (string)

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

ConstantInitializationVector -> (string)

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

DeviceId -> (string)

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

KeyType -> (string)

The type of key that is used for the encryption. If no keyType is provided, the service will use the default setting (static-key).

Region -> (string)

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

ResourceId -> (string)

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

RoleArn -> (string)

The ARN of the role that you created during setup (when you set up AWS Elemental MediaConnect as a trusted entity).

SecretArn -> (string)

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key. This parameter is required for static key encryption and is not valid for SPEKE encryption.

Url -> (string)

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

Description -> (string)

A description for the source. This value is not used or seen outside of the current AWS Elemental MediaConnect account.

EntitlementArn -> (string)

The ARN of the entitlement that allows you to subscribe to content that comes from another AWS account. The entitlement is set by the content originator and the ARN is generated as part of the originator's flow.

IngestIp -> (string)

The IP address that the flow will be listening on for incoming content.

IngestPort -> (integer)

The port that the flow will be listening on for incoming content.

Name -> (string)

The name of the source.

SourceArn -> (string)

The ARN of the source.

Transport -> (structure)

Attributes related to the transport stream that are used in the source.

CidrAllowList -> (list)

The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

(string)

MaxBitrate -> (integer)

The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.

MaxLatency -> (integer)

The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.

Protocol -> (string)

The protocol that is used by the source or output.

RemoteId -> (string)

The remote ID for the Zixi-pull stream.

SmoothingLatency -> (integer)

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

StreamId -> (string)

The stream ID that you want to use for this transport. This parameter applies only to Zixi-based streams.

VpcInterfaceName -> (string)

The name of the VPC Interface this Source is configured with.

WhitelistCidr -> (string)

The range of IP addresses that should be allowed to contribute content to your source. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Status -> (string)

The current status of the flow.

VpcInterfaces -> (list)

The VPC Interfaces for this flow.

(structure)

The settings for a VPC Source.

Name -> (string)

Immutable and has to be a unique against other VpcInterfaces in this Flow

NetworkInterfaceIds -> (list)

IDs of the network interfaces created in customer's account by MediaConnect.

(string)

RoleArn -> (string)

Role Arn MediaConnect can assumes to create ENIs in customer's account

SecurityGroupIds -> (list)

Security Group IDs to be used on ENI.

(string)

SubnetId -> (string)

Subnet must be in the AZ of the Flow