OracleSettings - AWS Database Migration Service

OracleSettings

Provides information that defines an Oracle endpoint.

Contents

AccessAlternateDirectly

Set this attribute to false in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This tells the DMS instance to not access redo logs through any specified path prefix replacement using direct file access.

Type: Boolean

Required: No

AdditionalArchivedLogDestId

Set this attribute with ArchivedLogDestId in a primary/ standby setup. This attribute is useful in the case of a switchover. In this case, AWS DMS needs to know which destination to get archive redo logs from to read changes. This need arises because the previous primary instance is now a standby instance after switchover.

Although AWS DMS supports the use of the Oracle RESETLOGS option to open the database, never use RESETLOGS unless necessary. For additional information about RESETLOGS, see RMAN Data Repair Concepts in the Oracle Database Backup and Recovery User's Guide.

Type: Integer

Required: No

AddSupplementalLogging

Set this attribute to set up table-level supplemental logging for the Oracle database. This attribute enables PRIMARY KEY supplemental logging on all tables selected for a migration task.

If you use this option, you still need to enable database-level supplemental logging.

Type: Boolean

Required: No

AllowSelectNestedTables

Set this attribute to true to enable replication of Oracle tables containing columns that are nested tables or defined types.

Type: Boolean

Required: No

ArchivedLogDestId

Specifies the ID of the destination for the archived redo logs. This value should be the same as a number in the dest_id column of the v$archived_log view. If you work with an additional redo log destination, use the AdditionalArchivedLogDestId option to specify the additional destination ID. Doing this improves performance by ensuring that the correct logs are accessed from the outset.

Type: Integer

Required: No

ArchivedLogsOnly

When this field is set to True, AWS DMS only accesses the archived redo logs. If the archived redo logs are stored on Automatic Storage Management (ASM) only, the AWS DMS user account needs to be granted ASM privileges.

Type: Boolean

Required: No

AsmPassword

For an Oracle source endpoint, your Oracle Automatic Storage Management (ASM) password. You can set this value from the asm_user_password value. You set this value as part of the comma-separated value that you set to the Password request parameter when you create the endpoint to access transaction logs using Binary Reader. For more information, see Configuration for change data capture (CDC) on an Oracle source database.

Type: String

Required: No

AsmServer

For an Oracle source endpoint, your ASM server address. You can set this value from the asm_server value. You set asm_server as part of the extra connection attribute string to access an Oracle server with Binary Reader that uses ASM. For more information, see Configuration for change data capture (CDC) on an Oracle source database.

Type: String

Required: No

AsmUser

For an Oracle source endpoint, your ASM user name. You can set this value from the asm_user value. You set asm_user as part of the extra connection attribute string to access an Oracle server with Binary Reader that uses ASM. For more information, see Configuration for change data capture (CDC) on an Oracle source database.

Type: String

Required: No

CharLengthSemantics

Specifies whether the length of a character column is in bytes or in characters. To indicate that the character column length is in characters, set this attribute to CHAR. Otherwise, the character column length is in bytes.

Example: charLengthSemantics=CHAR;

Type: String

Valid Values: default | char | byte

Required: No

ConvertTimestampWithZoneToUTC

When true, converts timestamps with the timezone datatype to their UTC value.

Type: Boolean

Required: No

DatabaseName

Database name for the endpoint.

Type: String

Required: No

DirectPathNoLog

When set to true, this attribute helps to increase the commit rate on the Oracle target database by writing directly to tables and not writing a trail to database logs.

Type: Boolean

Required: No

DirectPathParallelLoad

When set to true, this attribute specifies a parallel load when useDirectPathFullLoad is set to Y. This attribute also only applies when you use the AWS DMS parallel load feature. Note that the target table cannot have any constraints or indexes.

Type: Boolean

Required: No

EnableHomogenousTablespace

Set this attribute to enable homogenous tablespace replication and create existing tables or indexes under the same tablespace on the target.

Type: Boolean

Required: No

ExtraArchivedLogDestIds

Specifies the IDs of one more destinations for one or more archived redo logs. These IDs are the values of the dest_id column in the v$archived_log view. Use this setting with the archivedLogDestId extra connection attribute in a primary-to-single setup or a primary-to-multiple-standby setup.

This setting is useful in a switchover when you use an Oracle Data Guard database as a source. In this case, AWS DMS needs information about what destination to get archive redo logs from to read changes. AWS DMS needs this because after the switchover the previous primary is a standby instance. For example, in a primary-to-single standby setup you might apply the following settings.

archivedLogDestId=1; ExtraArchivedLogDestIds=[2]

In a primary-to-multiple-standby setup, you might apply the following settings.

archivedLogDestId=1; ExtraArchivedLogDestIds=[2,3,4]

Although AWS DMS supports the use of the Oracle RESETLOGS option to open the database, never use RESETLOGS unless it's necessary. For more information about RESETLOGS, see RMAN Data Repair Concepts in the Oracle Database Backup and Recovery User's Guide.

Type: Array of integers

Required: No

FailTasksOnLobTruncation

When set to true, this attribute causes a task to fail if the actual size of an LOB column is greater than the specified LobMaxSize.

If a task is set to limited LOB mode and this option is set to true, the task fails instead of truncating the LOB data.

Type: Boolean

Required: No

NumberDatatypeScale

Specifies the number scale. You can select a scale up to 38, or you can select FLOAT. By default, the NUMBER data type is converted to precision 38, scale 10.

Example: numberDataTypeScale=12

Type: Integer

Required: No

OpenTransactionWindow

The timeframe in minutes to check for open transactions for a CDC-only task.

You can specify an integer value between 0 (the default) and 240 (the maximum).

Note

This parameter is only valid in AWS DMS version 3.5.0 and later.

Type: Integer

Required: No

OraclePathPrefix

Set this string attribute to the required value in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This value specifies the default Oracle root used to access the redo logs.

Type: String

Required: No

ParallelAsmReadThreads

Set this attribute to change the number of threads that DMS configures to perform a change data capture (CDC) load using Oracle Automatic Storage Management (ASM). You can specify an integer value between 2 (the default) and 8 (the maximum). Use this attribute together with the readAheadBlocks attribute.

Type: Integer

Required: No

Password

Endpoint connection password.

Type: String

Required: No

Port

Endpoint TCP port.

Type: Integer

Required: No

ReadAheadBlocks

Set this attribute to change the number of read-ahead blocks that DMS configures to perform a change data capture (CDC) load using Oracle Automatic Storage Management (ASM). You can specify an integer value between 1000 (the default) and 200,000 (the maximum).

Type: Integer

Required: No

ReadTableSpaceName

When set to true, this attribute supports tablespace replication.

Type: Boolean

Required: No

ReplacePathPrefix

Set this attribute to true in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This setting tells DMS instance to replace the default Oracle root with the specified usePathPrefix setting to access the redo logs.

Type: Boolean

Required: No

RetryInterval

Specifies the number of seconds that the system waits before resending a query.

Example: retryInterval=6;

Type: Integer

Required: No

SecretsManagerAccessRoleArn

The full Amazon Resource Name (ARN) of the IAM role that specifies AWS DMS as the trusted entity and grants the required permissions to access the value in SecretsManagerSecret. The role must allow the iam:PassRole action. SecretsManagerSecret has the value of the AWS Secrets Manager secret that allows access to the Oracle endpoint.

Note

You can specify one of two sets of values for these permissions. You can specify the values for this setting and SecretsManagerSecretId. Or you can specify clear-text values for UserName, Password, ServerName, and Port. You can't specify both. For more information on creating this SecretsManagerSecret and the SecretsManagerAccessRoleArn and SecretsManagerSecretId required to access it, see Using secrets to access AWS Database Migration Service resources in the AWS Database Migration Service User Guide.

Type: String

Required: No

SecretsManagerOracleAsmAccessRoleArn

Required only if your Oracle endpoint uses Automatic Storage Management (ASM). The full ARN of the IAM role that specifies AWS DMS as the trusted entity and grants the required permissions to access the SecretsManagerOracleAsmSecret. This SecretsManagerOracleAsmSecret has the secret value that allows access to the Oracle ASM of the endpoint.

Note

You can specify one of two sets of values for these permissions. You can specify the values for this setting and SecretsManagerOracleAsmSecretId. Or you can specify clear-text values for AsmUser, AsmPassword, and AsmServerName. You can't specify both. For more information on creating this SecretsManagerOracleAsmSecret and the SecretsManagerOracleAsmAccessRoleArn and SecretsManagerOracleAsmSecretId required to access it, see Using secrets to access AWS Database Migration Service resources in the AWS Database Migration Service User Guide.

Type: String

Required: No

SecretsManagerOracleAsmSecretId

Required only if your Oracle endpoint uses Automatic Storage Management (ASM). The full ARN, partial ARN, or friendly name of the SecretsManagerOracleAsmSecret that contains the Oracle ASM connection details for the Oracle endpoint.

Type: String

Required: No

SecretsManagerSecretId

The full ARN, partial ARN, or friendly name of the SecretsManagerSecret that contains the Oracle endpoint connection details.

Type: String

Required: No

SecurityDbEncryption

For an Oracle source endpoint, the transparent data encryption (TDE) password required by AWM DMS to access Oracle redo logs encrypted by TDE using Binary Reader. It is also the TDE_Password part of the comma-separated value you set to the Password request parameter when you create the endpoint. The SecurityDbEncryptian setting is related to this SecurityDbEncryptionName setting. For more information, see Supported encryption methods for using Oracle as a source for AWS DMS in the AWS Database Migration Service User Guide.

Type: String

Required: No

SecurityDbEncryptionName

For an Oracle source endpoint, the name of a key used for the transparent data encryption (TDE) of the columns and tablespaces in an Oracle source database that is encrypted using TDE. The key value is the value of the SecurityDbEncryption setting. For more information on setting the key name value of SecurityDbEncryptionName, see the information and example for setting the securityDbEncryptionName extra connection attribute in Supported encryption methods for using Oracle as a source for AWS DMS in the AWS Database Migration Service User Guide.

Type: String

Required: No

ServerName

Fully qualified domain name of the endpoint.

For an Amazon RDS Oracle instance, this is the output of DescribeDBInstances, in the Endpoint.Address field.

Type: String

Required: No

SpatialDataOptionToGeoJsonFunctionName

Use this attribute to convert SDO_GEOMETRY to GEOJSON format. By default, DMS calls the SDO2GEOJSON custom function if present and accessible. Or you can create your own custom function that mimics the operation of SDOGEOJSON and set SpatialDataOptionToGeoJsonFunctionName to call it instead.

Type: String

Required: No

StandbyDelayTime

Use this attribute to specify a time in minutes for the delay in standby sync. If the source is an Oracle Active Data Guard standby database, use this attribute to specify the time lag between primary and standby databases.

In AWS DMS, you can create an Oracle CDC task that uses an Active Data Guard standby instance as a source for replicating ongoing changes. Doing this eliminates the need to connect to an active database that might be in production.

Type: Integer

Required: No

TrimSpaceInChar

Use the TrimSpaceInChar source endpoint setting to trim data on CHAR and NCHAR data types during migration. The default value is true.

Type: Boolean

Required: No

UseAlternateFolderForOnline

Set this attribute to true in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This tells the DMS instance to use any specified prefix replacement to access all online redo logs.

Type: Boolean

Required: No

UseBFile

Set this attribute to True to capture change data using the Binary Reader utility. Set UseLogminerReader to False to set this attribute to True. To use Binary Reader with Amazon RDS for Oracle as the source, you set additional attributes. For more information about using this setting with Oracle Automatic Storage Management (ASM), see Using Oracle LogMiner or AWS DMS Binary Reader for CDC.

Type: Boolean

Required: No

UseDirectPathFullLoad

Set this attribute to True to have AWS DMS use a direct path full load. Specify this value to use the direct path protocol in the Oracle Call Interface (OCI). By using this OCI protocol, you can bulk-load Oracle target tables during a full load.

Type: Boolean

Required: No

UseLogminerReader

Set this attribute to True to capture change data using the Oracle LogMiner utility (the default). Set this attribute to False if you want to access the redo logs as a binary file. When you set UseLogminerReader to False, also set UseBfile to True. For more information on this setting and using Oracle ASM, see Using Oracle LogMiner or AWS DMS Binary Reader for CDC in the AWS DMS User Guide.

Type: Boolean

Required: No

UsePathPrefix

Set this string attribute to the required value in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This value specifies the path prefix used to replace the default Oracle root to access the redo logs.

Type: String

Required: No

Username

Endpoint connection user name.

Type: String

Required: No

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: