RackPhysicalProperties - AWS Outposts
ContentsSee Also

RackPhysicalProperties

Information about the physical and logistical details for racks at sites. For more information about hardware requirements for racks, see Network readiness checklist in the AWS Outposts User Guide.

Contents

FiberOpticCableType

The type of fiber used to attach the Outpost to the network.

Type: String

Valid Values: SINGLE_MODE | MULTI_MODE

Required: No

MaximumSupportedWeightLbs

The maximum rack weight that this site can support. NO_LIMIT is over 2000 lbs (907 kg).

Type: String

Valid Values: NO_LIMIT | MAX_1400_LBS | MAX_1600_LBS | MAX_1800_LBS | MAX_2000_LBS

Required: No

OpticalStandard

The type of optical standard used to attach the Outpost to the network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the AWS Outposts User Guide.

Type: String

Valid Values: OPTIC_10GBASE_SR | OPTIC_10GBASE_IR | OPTIC_10GBASE_LR | OPTIC_40GBASE_SR | OPTIC_40GBASE_ESR | OPTIC_40GBASE_IR4_LR4L | OPTIC_40GBASE_LR4 | OPTIC_100GBASE_SR4 | OPTIC_100GBASE_CWDM4 | OPTIC_100GBASE_LR4 | OPTIC_100G_PSM4_MSA | OPTIC_1000BASE_LX | OPTIC_1000BASE_SX

Required: No

PowerConnector

The power connector for the hardware.

Type: String

Valid Values: L6_30P | IEC309 | AH530P7W | AH532P6W

Required: No

PowerDrawKva

The power draw available at the hardware placement position for the rack.

Type: String

Valid Values: POWER_5_KVA | POWER_10_KVA | POWER_15_KVA | POWER_30_KVA

Required: No

PowerFeedDrop

The position of the power feed.

Type: String

Valid Values: ABOVE_RACK | BELOW_RACK

Required: No

PowerPhase

The power option that you can provide for hardware.

Type: String

Valid Values: SINGLE_PHASE | THREE_PHASE

Required: No

UplinkCount

The number of uplinks each Outpost network device.

Type: String

Valid Values: UPLINK_COUNT_1 | UPLINK_COUNT_2 | UPLINK_COUNT_3 | UPLINK_COUNT_4 | UPLINK_COUNT_5 | UPLINK_COUNT_6 | UPLINK_COUNT_7 | UPLINK_COUNT_8 | UPLINK_COUNT_12 | UPLINK_COUNT_16

Required: No

UplinkGbps

The uplink speed the rack supports for the connection to the Region.

Type: String

Valid Values: UPLINK_1G | UPLINK_10G | UPLINK_40G | UPLINK_100G

Required: No

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: