const (
    // AddressFamilyIpv4 is a AddressFamily enum value
    AddressFamilyIpv4 = "ipv4"

    // AddressFamilyIpv6 is a AddressFamily enum value
    AddressFamilyIpv6 = "ipv6"
)

const (
    // BGPPeerStateVerifying is a BGPPeerState enum value
    BGPPeerStateVerifying = "verifying"

    // BGPPeerStatePending is a BGPPeerState enum value
    BGPPeerStatePending = "pending"

    // BGPPeerStateAvailable is a BGPPeerState enum value
    BGPPeerStateAvailable = "available"

    // BGPPeerStateDeleting is a BGPPeerState enum value
    BGPPeerStateDeleting = "deleting"

    // BGPPeerStateDeleted is a BGPPeerState enum value
    BGPPeerStateDeleted = "deleted"
)

const (
    // BGPStatusUp is a BGPStatus enum value
    BGPStatusUp = "up"

    // BGPStatusDown is a BGPStatus enum value
    BGPStatusDown = "down"

    // BGPStatusUnknown is a BGPStatus enum value
    BGPStatusUnknown = "unknown"
)

const (
    // ConnectionStateOrdering is a ConnectionState enum value
    ConnectionStateOrdering = "ordering"

    // ConnectionStateRequested is a ConnectionState enum value
    ConnectionStateRequested = "requested"

    // ConnectionStatePending is a ConnectionState enum value
    ConnectionStatePending = "pending"

    // ConnectionStateAvailable is a ConnectionState enum value
    ConnectionStateAvailable = "available"

    // ConnectionStateDown is a ConnectionState enum value
    ConnectionStateDown = "down"

    // ConnectionStateDeleting is a ConnectionState enum value
    ConnectionStateDeleting = "deleting"

    // ConnectionStateDeleted is a ConnectionState enum value
    ConnectionStateDeleted = "deleted"

    // ConnectionStateRejected is a ConnectionState enum value
    ConnectionStateRejected = "rejected"

    // ConnectionStateUnknown is a ConnectionState enum value
    ConnectionStateUnknown = "unknown"
)

const (
    // GatewayAssociationProposalStateRequested is a GatewayAssociationProposalState enum value
    GatewayAssociationProposalStateRequested = "requested"

    // GatewayAssociationProposalStateAccepted is a GatewayAssociationProposalState enum value
    GatewayAssociationProposalStateAccepted = "accepted"

    // GatewayAssociationProposalStateDeleted is a GatewayAssociationProposalState enum value
    GatewayAssociationProposalStateDeleted = "deleted"
)

const (
    // GatewayAssociationStateAssociating is a GatewayAssociationState enum value
    GatewayAssociationStateAssociating = "associating"

    // GatewayAssociationStateAssociated is a GatewayAssociationState enum value
    GatewayAssociationStateAssociated = "associated"

    // GatewayAssociationStateDisassociating is a GatewayAssociationState enum value
    GatewayAssociationStateDisassociating = "disassociating"

    // GatewayAssociationStateDisassociated is a GatewayAssociationState enum value
    GatewayAssociationStateDisassociated = "disassociated"

    // GatewayAssociationStateUpdating is a GatewayAssociationState enum value
    GatewayAssociationStateUpdating = "updating"
)

const (
    // GatewayAttachmentStateAttaching is a GatewayAttachmentState enum value
    GatewayAttachmentStateAttaching = "attaching"

    // GatewayAttachmentStateAttached is a GatewayAttachmentState enum value
    GatewayAttachmentStateAttached = "attached"

    // GatewayAttachmentStateDetaching is a GatewayAttachmentState enum value
    GatewayAttachmentStateDetaching = "detaching"

    // GatewayAttachmentStateDetached is a GatewayAttachmentState enum value
    GatewayAttachmentStateDetached = "detached"
)

const (
    // GatewayAttachmentTypeTransitVirtualInterface is a GatewayAttachmentType enum value
    GatewayAttachmentTypeTransitVirtualInterface = "TransitVirtualInterface"

    // GatewayAttachmentTypePrivateVirtualInterface is a GatewayAttachmentType enum value
    GatewayAttachmentTypePrivateVirtualInterface = "PrivateVirtualInterface"
)

const (
    // GatewayStatePending is a GatewayState enum value
    GatewayStatePending = "pending"

    // GatewayStateAvailable is a GatewayState enum value
    GatewayStateAvailable = "available"

    // GatewayStateDeleting is a GatewayState enum value
    GatewayStateDeleting = "deleting"

    // GatewayStateDeleted is a GatewayState enum value
    GatewayStateDeleted = "deleted"
)

const (
    // GatewayTypeVirtualPrivateGateway is a GatewayType enum value
    GatewayTypeVirtualPrivateGateway = "virtualPrivateGateway"

    // GatewayTypeTransitGateway is a GatewayType enum value
    GatewayTypeTransitGateway = "transitGateway"
)

const (
    // HasLogicalRedundancyUnknown is a HasLogicalRedundancy enum value
    HasLogicalRedundancyUnknown = "unknown"

    // HasLogicalRedundancyYes is a HasLogicalRedundancy enum value
    HasLogicalRedundancyYes = "yes"

    // HasLogicalRedundancyNo is a HasLogicalRedundancy enum value
    HasLogicalRedundancyNo = "no"
)

const (
    // InterconnectStateRequested is a InterconnectState enum value
    InterconnectStateRequested = "requested"

    // InterconnectStatePending is a InterconnectState enum value
    InterconnectStatePending = "pending"

    // InterconnectStateAvailable is a InterconnectState enum value
    InterconnectStateAvailable = "available"

    // InterconnectStateDown is a InterconnectState enum value
    InterconnectStateDown = "down"

    // InterconnectStateDeleting is a InterconnectState enum value
    InterconnectStateDeleting = "deleting"

    // InterconnectStateDeleted is a InterconnectState enum value
    InterconnectStateDeleted = "deleted"

    // InterconnectStateUnknown is a InterconnectState enum value
    InterconnectStateUnknown = "unknown"
)

const (
    // LagStateRequested is a LagState enum value
    LagStateRequested = "requested"

    // LagStatePending is a LagState enum value
    LagStatePending = "pending"

    // LagStateAvailable is a LagState enum value
    LagStateAvailable = "available"

    // LagStateDown is a LagState enum value
    LagStateDown = "down"

    // LagStateDeleting is a LagState enum value
    LagStateDeleting = "deleting"

    // LagStateDeleted is a LagState enum value
    LagStateDeleted = "deleted"

    // LagStateUnknown is a LagState enum value
    LagStateUnknown = "unknown"
)

const (
    // NniPartnerTypeV1 is a NniPartnerType enum value
    NniPartnerTypeV1 = "v1"

    // NniPartnerTypeV2 is a NniPartnerType enum value
    NniPartnerTypeV2 = "v2"

    // NniPartnerTypeNonPartner is a NniPartnerType enum value
    NniPartnerTypeNonPartner = "nonPartner"
)

const (
    // VirtualInterfaceStateConfirming is a VirtualInterfaceState enum value
    VirtualInterfaceStateConfirming = "confirming"

    // VirtualInterfaceStateVerifying is a VirtualInterfaceState enum value
    VirtualInterfaceStateVerifying = "verifying"

    // VirtualInterfaceStatePending is a VirtualInterfaceState enum value
    VirtualInterfaceStatePending = "pending"

    // VirtualInterfaceStateAvailable is a VirtualInterfaceState enum value
    VirtualInterfaceStateAvailable = "available"

    // VirtualInterfaceStateDown is a VirtualInterfaceState enum value
    VirtualInterfaceStateDown = "down"

    // VirtualInterfaceStateDeleting is a VirtualInterfaceState enum value
    VirtualInterfaceStateDeleting = "deleting"

    // VirtualInterfaceStateDeleted is a VirtualInterfaceState enum value
    VirtualInterfaceStateDeleted = "deleted"

    // VirtualInterfaceStateRejected is a VirtualInterfaceState enum value
    VirtualInterfaceStateRejected = "rejected"

    // VirtualInterfaceStateUnknown is a VirtualInterfaceState enum value
    VirtualInterfaceStateUnknown = "unknown"
)

const (

    // ErrCodeClientException for service response error code
    // "DirectConnectClientException".
    //
    // One or more parameters are not valid.
    ErrCodeClientException = "DirectConnectClientException"

    // ErrCodeDuplicateTagKeysException for service response error code
    // "DuplicateTagKeysException".
    //
    // A tag key was specified more than once.
    ErrCodeDuplicateTagKeysException = "DuplicateTagKeysException"

    // ErrCodeServerException for service response error code
    // "DirectConnectServerException".
    //
    // A server-side error occurred.
    ErrCodeServerException = "DirectConnectServerException"

    // ErrCodeTooManyTagsException for service response error code
    // "TooManyTagsException".
    //
    // You have reached the limit on the number of tags that can be assigned.
    ErrCodeTooManyTagsException = "TooManyTagsException"
)

const (
    ServiceName = "directconnect"  // Name of service.
    EndpointsID = ServiceName      // ID to lookup a service endpoint with.
    ServiceID   = "Direct Connect" // ServiceID is a unique identifier of a specific service.
)

const (
    // LoaContentTypeApplicationPdf is a LoaContentType enum value
    LoaContentTypeApplicationPdf = "application/pdf"
)

func AddressFamily_Values ¶

func AddressFamily_Values() []string

AddressFamily_Values returns all elements of the AddressFamily enum

func BGPPeerState_Values ¶

func BGPPeerState_Values() []string

BGPPeerState_Values returns all elements of the BGPPeerState enum

func BGPStatus_Values ¶

func BGPStatus_Values() []string

BGPStatus_Values returns all elements of the BGPStatus enum

func ConnectionState_Values ¶

func ConnectionState_Values() []string

ConnectionState_Values returns all elements of the ConnectionState enum

func GatewayAssociationProposalState_Values ¶

func GatewayAssociationProposalState_Values() []string

GatewayAssociationProposalState_Values returns all elements of the GatewayAssociationProposalState enum

func GatewayAssociationState_Values ¶

func GatewayAssociationState_Values() []string

GatewayAssociationState_Values returns all elements of the GatewayAssociationState enum

func GatewayAttachmentState_Values ¶

func GatewayAttachmentState_Values() []string

GatewayAttachmentState_Values returns all elements of the GatewayAttachmentState enum

func GatewayAttachmentType_Values ¶

func GatewayAttachmentType_Values() []string

GatewayAttachmentType_Values returns all elements of the GatewayAttachmentType enum

func GatewayState_Values ¶

func GatewayState_Values() []string

GatewayState_Values returns all elements of the GatewayState enum

func GatewayType_Values ¶

func GatewayType_Values() []string

GatewayType_Values returns all elements of the GatewayType enum

func HasLogicalRedundancy_Values ¶

func HasLogicalRedundancy_Values() []string

HasLogicalRedundancy_Values returns all elements of the HasLogicalRedundancy enum

func InterconnectState_Values ¶

func InterconnectState_Values() []string

InterconnectState_Values returns all elements of the InterconnectState enum

func LagState_Values ¶

func LagState_Values() []string

LagState_Values returns all elements of the LagState enum

func LoaContentType_Values ¶

func LoaContentType_Values() []string

LoaContentType_Values returns all elements of the LoaContentType enum

func NniPartnerType_Values ¶

func NniPartnerType_Values() []string

NniPartnerType_Values returns all elements of the NniPartnerType enum

func VirtualInterfaceState_Values ¶

func VirtualInterfaceState_Values() []string

VirtualInterfaceState_Values returns all elements of the VirtualInterfaceState enum

type AcceptDirectConnectGatewayAssociationProposalInput ¶

type AcceptDirectConnectGatewayAssociationProposalInput struct {

    // The ID of the Amazon Web Services account that owns the virtual private gateway
    // or transit gateway.
    //
    // AssociatedGatewayOwnerAccount is a required field
    AssociatedGatewayOwnerAccount *string `locationName:"associatedGatewayOwnerAccount" type:"string" required:"true"`

    // The ID of the Direct Connect gateway.
    //
    // DirectConnectGatewayId is a required field
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string" required:"true"`

    // Overrides the Amazon VPC prefixes advertised to the Direct Connect gateway.
    //
    // For information about how to set the prefixes, see Allowed Prefixes (https://docs.aws.amazon.com/directconnect/latest/UserGuide/multi-account-associate-vgw.html#allowed-prefixes)
    // in the Direct Connect User Guide.
    OverrideAllowedPrefixesToDirectConnectGateway []*RouteFilterPrefix `locationName:"overrideAllowedPrefixesToDirectConnectGateway" type:"list"`

    // The ID of the request proposal.
    //
    // ProposalId is a required field
    ProposalId *string `locationName:"proposalId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AcceptDirectConnectGatewayAssociationProposalInput) GoString ¶

func (s AcceptDirectConnectGatewayAssociationProposalInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AcceptDirectConnectGatewayAssociationProposalInput) SetAssociatedGatewayOwnerAccount ¶

func (s *AcceptDirectConnectGatewayAssociationProposalInput) SetAssociatedGatewayOwnerAccount(v string) *AcceptDirectConnectGatewayAssociationProposalInput

SetAssociatedGatewayOwnerAccount sets the AssociatedGatewayOwnerAccount field's value.

func (*AcceptDirectConnectGatewayAssociationProposalInput) SetDirectConnectGatewayId ¶

func (s *AcceptDirectConnectGatewayAssociationProposalInput) SetDirectConnectGatewayId(v string) *AcceptDirectConnectGatewayAssociationProposalInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*AcceptDirectConnectGatewayAssociationProposalInput) SetOverrideAllowedPrefixesToDirectConnectGateway ¶

func (s *AcceptDirectConnectGatewayAssociationProposalInput) SetOverrideAllowedPrefixesToDirectConnectGateway(v []*RouteFilterPrefix) *AcceptDirectConnectGatewayAssociationProposalInput

SetOverrideAllowedPrefixesToDirectConnectGateway sets the OverrideAllowedPrefixesToDirectConnectGateway field's value.

func (*AcceptDirectConnectGatewayAssociationProposalInput) SetProposalId ¶

func (s *AcceptDirectConnectGatewayAssociationProposalInput) SetProposalId(v string) *AcceptDirectConnectGatewayAssociationProposalInput

SetProposalId sets the ProposalId field's value.

func (AcceptDirectConnectGatewayAssociationProposalInput) String ¶

func (s AcceptDirectConnectGatewayAssociationProposalInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AcceptDirectConnectGatewayAssociationProposalInput) Validate ¶

func (s *AcceptDirectConnectGatewayAssociationProposalInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AcceptDirectConnectGatewayAssociationProposalOutput ¶

type AcceptDirectConnectGatewayAssociationProposalOutput struct {

    // Information about an association between a Direct Connect gateway and a virtual
    // gateway or transit gateway.
    DirectConnectGatewayAssociation *GatewayAssociation `locationName:"directConnectGatewayAssociation" type:"structure"`
    // contains filtered or unexported fields
}

func (AcceptDirectConnectGatewayAssociationProposalOutput) GoString ¶

func (s AcceptDirectConnectGatewayAssociationProposalOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AcceptDirectConnectGatewayAssociationProposalOutput) SetDirectConnectGatewayAssociation ¶

func (s *AcceptDirectConnectGatewayAssociationProposalOutput) SetDirectConnectGatewayAssociation(v *GatewayAssociation) *AcceptDirectConnectGatewayAssociationProposalOutput

SetDirectConnectGatewayAssociation sets the DirectConnectGatewayAssociation field's value.

func (AcceptDirectConnectGatewayAssociationProposalOutput) String ¶

func (s AcceptDirectConnectGatewayAssociationProposalOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AllocateConnectionOnInterconnectInput ¶

type AllocateConnectionOnInterconnectInput struct {

    // The bandwidth of the connection. The possible values are 50Mbps, 100Mbps,
    // 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note
    // that only those Direct Connect Partners who have met specific requirements
    // are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.
    //
    // Bandwidth is a required field
    Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

    // The name of the provisioned connection.
    //
    // ConnectionName is a required field
    ConnectionName *string `locationName:"connectionName" type:"string" required:"true"`

    // The ID of the interconnect on which the connection will be provisioned.
    //
    // InterconnectId is a required field
    InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`

    // The ID of the Amazon Web Services account of the customer for whom the connection
    // will be provisioned.
    //
    // OwnerAccount is a required field
    OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`

    // The dedicated VLAN provisioned to the connection.
    //
    // Vlan is a required field
    Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
    // contains filtered or unexported fields
}

func (AllocateConnectionOnInterconnectInput) GoString ¶

func (s AllocateConnectionOnInterconnectInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocateConnectionOnInterconnectInput) SetBandwidth ¶

func (s *AllocateConnectionOnInterconnectInput) SetBandwidth(v string) *AllocateConnectionOnInterconnectInput

SetBandwidth sets the Bandwidth field's value.

func (*AllocateConnectionOnInterconnectInput) SetConnectionName ¶

func (s *AllocateConnectionOnInterconnectInput) SetConnectionName(v string) *AllocateConnectionOnInterconnectInput

SetConnectionName sets the ConnectionName field's value.

func (*AllocateConnectionOnInterconnectInput) SetInterconnectId ¶

func (s *AllocateConnectionOnInterconnectInput) SetInterconnectId(v string) *AllocateConnectionOnInterconnectInput

SetInterconnectId sets the InterconnectId field's value.

func (*AllocateConnectionOnInterconnectInput) SetOwnerAccount ¶

func (s *AllocateConnectionOnInterconnectInput) SetOwnerAccount(v string) *AllocateConnectionOnInterconnectInput

SetOwnerAccount sets the OwnerAccount field's value.

func (*AllocateConnectionOnInterconnectInput) SetVlan ¶

func (s *AllocateConnectionOnInterconnectInput) SetVlan(v int64) *AllocateConnectionOnInterconnectInput

SetVlan sets the Vlan field's value.

func (AllocateConnectionOnInterconnectInput) String ¶

func (s AllocateConnectionOnInterconnectInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocateConnectionOnInterconnectInput) Validate ¶

func (s *AllocateConnectionOnInterconnectInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AllocateHostedConnectionInput ¶

type AllocateHostedConnectionInput struct {

    // The bandwidth of the connection. The possible values are 50Mbps, 100Mbps,
    // 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, 10Gbps, and 25Gbps.
    // Note that only those Direct Connect Partners who have met specific requirements
    // are allowed to create a 1Gbps, 2Gbps, 5Gbps, 10Gbps, or 25Gbps hosted connection.
    //
    // Bandwidth is a required field
    Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

    // The ID of the interconnect or LAG.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // The name of the hosted connection.
    //
    // ConnectionName is a required field
    ConnectionName *string `locationName:"connectionName" type:"string" required:"true"`

    // The ID of the Amazon Web Services account ID of the customer for the connection.
    //
    // OwnerAccount is a required field
    OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`

    // The tags associated with the connection.
    Tags []*Tag `locationName:"tags" min:"1" type:"list"`

    // The dedicated VLAN provisioned to the hosted connection.
    //
    // Vlan is a required field
    Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
    // contains filtered or unexported fields
}

func (AllocateHostedConnectionInput) GoString ¶

func (s AllocateHostedConnectionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocateHostedConnectionInput) SetBandwidth ¶

func (s *AllocateHostedConnectionInput) SetBandwidth(v string) *AllocateHostedConnectionInput

SetBandwidth sets the Bandwidth field's value.

func (*AllocateHostedConnectionInput) SetConnectionId ¶

func (s *AllocateHostedConnectionInput) SetConnectionId(v string) *AllocateHostedConnectionInput

SetConnectionId sets the ConnectionId field's value.

func (*AllocateHostedConnectionInput) SetConnectionName ¶

func (s *AllocateHostedConnectionInput) SetConnectionName(v string) *AllocateHostedConnectionInput

SetConnectionName sets the ConnectionName field's value.

func (*AllocateHostedConnectionInput) SetOwnerAccount ¶

func (s *AllocateHostedConnectionInput) SetOwnerAccount(v string) *AllocateHostedConnectionInput

SetOwnerAccount sets the OwnerAccount field's value.

func (*AllocateHostedConnectionInput) SetTags ¶

func (s *AllocateHostedConnectionInput) SetTags(v []*Tag) *AllocateHostedConnectionInput

SetTags sets the Tags field's value.

func (*AllocateHostedConnectionInput) SetVlan ¶

func (s *AllocateHostedConnectionInput) SetVlan(v int64) *AllocateHostedConnectionInput

SetVlan sets the Vlan field's value.

func (AllocateHostedConnectionInput) String ¶

func (s AllocateHostedConnectionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocateHostedConnectionInput) Validate ¶

func (s *AllocateHostedConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AllocatePrivateVirtualInterfaceInput ¶

type AllocatePrivateVirtualInterfaceInput struct {

    // The ID of the connection on which the private virtual interface is provisioned.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // Information about the private virtual interface.
    //
    // NewPrivateVirtualInterfaceAllocation is a required field
    NewPrivateVirtualInterfaceAllocation *NewPrivateVirtualInterfaceAllocation `locationName:"newPrivateVirtualInterfaceAllocation" type:"structure" required:"true"`

    // The ID of the Amazon Web Services account that owns the virtual private interface.
    //
    // OwnerAccount is a required field
    OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AllocatePrivateVirtualInterfaceInput) GoString ¶

func (s AllocatePrivateVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocatePrivateVirtualInterfaceInput) SetConnectionId ¶

func (s *AllocatePrivateVirtualInterfaceInput) SetConnectionId(v string) *AllocatePrivateVirtualInterfaceInput

SetConnectionId sets the ConnectionId field's value.

func (*AllocatePrivateVirtualInterfaceInput) SetNewPrivateVirtualInterfaceAllocation ¶

func (s *AllocatePrivateVirtualInterfaceInput) SetNewPrivateVirtualInterfaceAllocation(v *NewPrivateVirtualInterfaceAllocation) *AllocatePrivateVirtualInterfaceInput

SetNewPrivateVirtualInterfaceAllocation sets the NewPrivateVirtualInterfaceAllocation field's value.

func (*AllocatePrivateVirtualInterfaceInput) SetOwnerAccount ¶

func (s *AllocatePrivateVirtualInterfaceInput) SetOwnerAccount(v string) *AllocatePrivateVirtualInterfaceInput

SetOwnerAccount sets the OwnerAccount field's value.

func (AllocatePrivateVirtualInterfaceInput) String ¶

func (s AllocatePrivateVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocatePrivateVirtualInterfaceInput) Validate ¶

func (s *AllocatePrivateVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AllocatePublicVirtualInterfaceInput ¶

type AllocatePublicVirtualInterfaceInput struct {

    // The ID of the connection on which the public virtual interface is provisioned.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // Information about the public virtual interface.
    //
    // NewPublicVirtualInterfaceAllocation is a required field
    NewPublicVirtualInterfaceAllocation *NewPublicVirtualInterfaceAllocation `locationName:"newPublicVirtualInterfaceAllocation" type:"structure" required:"true"`

    // The ID of the Amazon Web Services account that owns the public virtual interface.
    //
    // OwnerAccount is a required field
    OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AllocatePublicVirtualInterfaceInput) GoString ¶

func (s AllocatePublicVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocatePublicVirtualInterfaceInput) SetConnectionId ¶

func (s *AllocatePublicVirtualInterfaceInput) SetConnectionId(v string) *AllocatePublicVirtualInterfaceInput

SetConnectionId sets the ConnectionId field's value.

func (*AllocatePublicVirtualInterfaceInput) SetNewPublicVirtualInterfaceAllocation ¶

func (s *AllocatePublicVirtualInterfaceInput) SetNewPublicVirtualInterfaceAllocation(v *NewPublicVirtualInterfaceAllocation) *AllocatePublicVirtualInterfaceInput

SetNewPublicVirtualInterfaceAllocation sets the NewPublicVirtualInterfaceAllocation field's value.

func (*AllocatePublicVirtualInterfaceInput) SetOwnerAccount ¶

func (s *AllocatePublicVirtualInterfaceInput) SetOwnerAccount(v string) *AllocatePublicVirtualInterfaceInput

SetOwnerAccount sets the OwnerAccount field's value.

func (AllocatePublicVirtualInterfaceInput) String ¶

func (s AllocatePublicVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocatePublicVirtualInterfaceInput) Validate ¶

func (s *AllocatePublicVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AllocateTransitVirtualInterfaceInput ¶

type AllocateTransitVirtualInterfaceInput struct {

    // The ID of the connection on which the transit virtual interface is provisioned.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // Information about the transit virtual interface.
    //
    // NewTransitVirtualInterfaceAllocation is a required field
    NewTransitVirtualInterfaceAllocation *NewTransitVirtualInterfaceAllocation `locationName:"newTransitVirtualInterfaceAllocation" type:"structure" required:"true"`

    // The ID of the Amazon Web Services account that owns the transit virtual interface.
    //
    // OwnerAccount is a required field
    OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AllocateTransitVirtualInterfaceInput) GoString ¶

func (s AllocateTransitVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocateTransitVirtualInterfaceInput) SetConnectionId ¶

func (s *AllocateTransitVirtualInterfaceInput) SetConnectionId(v string) *AllocateTransitVirtualInterfaceInput

SetConnectionId sets the ConnectionId field's value.

func (*AllocateTransitVirtualInterfaceInput) SetNewTransitVirtualInterfaceAllocation ¶

func (s *AllocateTransitVirtualInterfaceInput) SetNewTransitVirtualInterfaceAllocation(v *NewTransitVirtualInterfaceAllocation) *AllocateTransitVirtualInterfaceInput

SetNewTransitVirtualInterfaceAllocation sets the NewTransitVirtualInterfaceAllocation field's value.

func (*AllocateTransitVirtualInterfaceInput) SetOwnerAccount ¶

func (s *AllocateTransitVirtualInterfaceInput) SetOwnerAccount(v string) *AllocateTransitVirtualInterfaceInput

SetOwnerAccount sets the OwnerAccount field's value.

func (AllocateTransitVirtualInterfaceInput) String ¶

func (s AllocateTransitVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocateTransitVirtualInterfaceInput) Validate ¶

func (s *AllocateTransitVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AllocateTransitVirtualInterfaceOutput ¶

type AllocateTransitVirtualInterfaceOutput struct {

    // Information about the transit virtual interface.
    VirtualInterface *VirtualInterface `locationName:"virtualInterface" type:"structure"`
    // contains filtered or unexported fields
}

func (AllocateTransitVirtualInterfaceOutput) GoString ¶

func (s AllocateTransitVirtualInterfaceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AllocateTransitVirtualInterfaceOutput) SetVirtualInterface ¶

func (s *AllocateTransitVirtualInterfaceOutput) SetVirtualInterface(v *VirtualInterface) *AllocateTransitVirtualInterfaceOutput

SetVirtualInterface sets the VirtualInterface field's value.

func (AllocateTransitVirtualInterfaceOutput) String ¶

func (s AllocateTransitVirtualInterfaceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateConnectionWithLagInput ¶

type AssociateConnectionWithLagInput struct {

    // The ID of the connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // The ID of the LAG with which to associate the connection.
    //
    // LagId is a required field
    LagId *string `locationName:"lagId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateConnectionWithLagInput) GoString ¶

func (s AssociateConnectionWithLagInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateConnectionWithLagInput) SetConnectionId ¶

func (s *AssociateConnectionWithLagInput) SetConnectionId(v string) *AssociateConnectionWithLagInput

SetConnectionId sets the ConnectionId field's value.

func (*AssociateConnectionWithLagInput) SetLagId ¶

func (s *AssociateConnectionWithLagInput) SetLagId(v string) *AssociateConnectionWithLagInput

SetLagId sets the LagId field's value.

func (AssociateConnectionWithLagInput) String ¶

func (s AssociateConnectionWithLagInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateConnectionWithLagInput) Validate ¶

func (s *AssociateConnectionWithLagInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateHostedConnectionInput ¶

type AssociateHostedConnectionInput struct {

    // The ID of the hosted connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // The ID of the interconnect or the LAG.
    //
    // ParentConnectionId is a required field
    ParentConnectionId *string `locationName:"parentConnectionId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateHostedConnectionInput) GoString ¶

func (s AssociateHostedConnectionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateHostedConnectionInput) SetConnectionId ¶

func (s *AssociateHostedConnectionInput) SetConnectionId(v string) *AssociateHostedConnectionInput

SetConnectionId sets the ConnectionId field's value.

func (*AssociateHostedConnectionInput) SetParentConnectionId ¶

func (s *AssociateHostedConnectionInput) SetParentConnectionId(v string) *AssociateHostedConnectionInput

SetParentConnectionId sets the ParentConnectionId field's value.

func (AssociateHostedConnectionInput) String ¶

func (s AssociateHostedConnectionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateHostedConnectionInput) Validate ¶

func (s *AssociateHostedConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateMacSecKeyInput ¶

type AssociateMacSecKeyInput struct {

    // The MAC Security (MACsec) CAK to associate with the dedicated connection.
    //
    // You can create the CKN/CAK pair using an industry standard tool.
    //
    // The valid values are 64 hexadecimal characters (0-9, A-E).
    //
    // If you use this request parameter, you must use the ckn request parameter
    // and not use the secretARN request parameter.
    Cak *string `locationName:"cak" type:"string"`

    // The MAC Security (MACsec) CKN to associate with the dedicated connection.
    //
    // You can create the CKN/CAK pair using an industry standard tool.
    //
    // The valid values are 64 hexadecimal characters (0-9, A-E).
    //
    // If you use this request parameter, you must use the cak request parameter
    // and not use the secretARN request parameter.
    Ckn *string `locationName:"ckn" type:"string"`

    // The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).
    //
    // You can use DescribeConnections or DescribeLags to retrieve connection ID.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key to
    // associate with the dedicated connection.
    //
    // You can use DescribeConnections or DescribeLags to retrieve the MAC Security
    // (MACsec) secret key.
    //
    // If you use this request parameter, you do not use the ckn and cak request
    // parameters.
    SecretARN *string `locationName:"secretARN" type:"string"`
    // contains filtered or unexported fields
}

func (AssociateMacSecKeyInput) GoString ¶

func (s AssociateMacSecKeyInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateMacSecKeyInput) SetCak ¶

func (s *AssociateMacSecKeyInput) SetCak(v string) *AssociateMacSecKeyInput

SetCak sets the Cak field's value.

func (*AssociateMacSecKeyInput) SetCkn ¶

func (s *AssociateMacSecKeyInput) SetCkn(v string) *AssociateMacSecKeyInput

SetCkn sets the Ckn field's value.

func (*AssociateMacSecKeyInput) SetConnectionId ¶

func (s *AssociateMacSecKeyInput) SetConnectionId(v string) *AssociateMacSecKeyInput

SetConnectionId sets the ConnectionId field's value.

func (*AssociateMacSecKeyInput) SetSecretARN ¶

func (s *AssociateMacSecKeyInput) SetSecretARN(v string) *AssociateMacSecKeyInput

SetSecretARN sets the SecretARN field's value.

func (AssociateMacSecKeyInput) String ¶

func (s AssociateMacSecKeyInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateMacSecKeyInput) Validate ¶

func (s *AssociateMacSecKeyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateMacSecKeyOutput ¶

type AssociateMacSecKeyOutput struct {

    // The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).
    ConnectionId *string `locationName:"connectionId" type:"string"`

    // The MAC Security (MACsec) security keys associated with the dedicated connection.
    MacSecKeys []*MacSecKey `locationName:"macSecKeys" type:"list"`
    // contains filtered or unexported fields
}

func (AssociateMacSecKeyOutput) GoString ¶

func (s AssociateMacSecKeyOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateMacSecKeyOutput) SetConnectionId ¶

func (s *AssociateMacSecKeyOutput) SetConnectionId(v string) *AssociateMacSecKeyOutput

SetConnectionId sets the ConnectionId field's value.

func (*AssociateMacSecKeyOutput) SetMacSecKeys ¶

func (s *AssociateMacSecKeyOutput) SetMacSecKeys(v []*MacSecKey) *AssociateMacSecKeyOutput

SetMacSecKeys sets the MacSecKeys field's value.

func (AssociateMacSecKeyOutput) String ¶

func (s AssociateMacSecKeyOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type AssociateVirtualInterfaceInput ¶

type AssociateVirtualInterfaceInput struct {

    // The ID of the LAG or connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // The ID of the virtual interface.
    //
    // VirtualInterfaceId is a required field
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateVirtualInterfaceInput) GoString ¶

func (s AssociateVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateVirtualInterfaceInput) SetConnectionId ¶

func (s *AssociateVirtualInterfaceInput) SetConnectionId(v string) *AssociateVirtualInterfaceInput

SetConnectionId sets the ConnectionId field's value.

func (*AssociateVirtualInterfaceInput) SetVirtualInterfaceId ¶

func (s *AssociateVirtualInterfaceInput) SetVirtualInterfaceId(v string) *AssociateVirtualInterfaceInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (AssociateVirtualInterfaceInput) String ¶

func (s AssociateVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociateVirtualInterfaceInput) Validate ¶

func (s *AssociateVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociatedGateway ¶

type AssociatedGateway struct {

    // The ID of the associated gateway.
    Id *string `locationName:"id" type:"string"`

    // The ID of the Amazon Web Services account that owns the associated virtual
    // private gateway or transit gateway.
    OwnerAccount *string `locationName:"ownerAccount" type:"string"`

    // The Region where the associated gateway is located.
    Region *string `locationName:"region" type:"string"`

    // The type of associated gateway.
    Type *string `locationName:"type" type:"string" enum:"GatewayType"`
    // contains filtered or unexported fields
}

Information about the associated gateway.

func (AssociatedGateway) GoString ¶

func (s AssociatedGateway) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AssociatedGateway) SetId ¶

func (s *AssociatedGateway) SetId(v string) *AssociatedGateway

SetId sets the Id field's value.

func (*AssociatedGateway) SetOwnerAccount ¶

func (s *AssociatedGateway) SetOwnerAccount(v string) *AssociatedGateway

SetOwnerAccount sets the OwnerAccount field's value.

func (*AssociatedGateway) SetRegion ¶

func (s *AssociatedGateway) SetRegion(v string) *AssociatedGateway

SetRegion sets the Region field's value.

func (*AssociatedGateway) SetType ¶

func (s *AssociatedGateway) SetType(v string) *AssociatedGateway

SetType sets the Type field's value.

func (AssociatedGateway) String ¶

func (s AssociatedGateway) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type BGPPeer ¶

type BGPPeer struct {

    // The address family for the BGP peer.
    AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

    // The IP address assigned to the Amazon interface.
    AmazonAddress *string `locationName:"amazonAddress" type:"string"`

    // The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
    Asn *int64 `locationName:"asn" type:"integer"`

    // The authentication key for BGP configuration. This string has a minimum length
    // of 6 characters and and a maximun lenth of 80 characters.
    AuthKey *string `locationName:"authKey" type:"string"`

    // The Direct Connect endpoint that terminates the BGP peer.
    AwsDeviceV2 *string `locationName:"awsDeviceV2" type:"string"`

    // The Direct Connect endpoint that terminates the logical connection. This
    // device might be different than the device that terminates the physical connection.
    AwsLogicalDeviceId *string `locationName:"awsLogicalDeviceId" type:"string"`

    // The ID of the BGP peer.
    BgpPeerId *string `locationName:"bgpPeerId" type:"string"`

    // The state of the BGP peer. The following are the possible values:
    //
    //    * verifying: The BGP peering addresses or ASN require validation before
    //    the BGP peer can be created. This state applies only to public virtual
    //    interfaces.
    //
    //    * pending: The BGP peer is created, and remains in this state until it
    //    is ready to be established.
    //
    //    * available: The BGP peer is ready to be established.
    //
    //    * deleting: The BGP peer is being deleted.
    //
    //    * deleted: The BGP peer is deleted and cannot be established.
    BgpPeerState *string `locationName:"bgpPeerState" type:"string" enum:"BGPPeerState"`

    // The status of the BGP peer. The following are the possible values:
    //
    //    * up: The BGP peer is established. This state does not indicate the state
    //    of the routing function. Ensure that you are receiving routes over the
    //    BGP session.
    //
    //    * down: The BGP peer is down.
    //
    //    * unknown: The BGP peer status is not available.
    BgpStatus *string `locationName:"bgpStatus" type:"string" enum:"BGPStatus"`

    // The IP address assigned to the customer interface.
    CustomerAddress *string `locationName:"customerAddress" type:"string"`
    // contains filtered or unexported fields
}

Information about a BGP peer.

func (BGPPeer) GoString ¶

func (s BGPPeer) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*BGPPeer) SetAddressFamily ¶

func (s *BGPPeer) SetAddressFamily(v string) *BGPPeer

SetAddressFamily sets the AddressFamily field's value.

func (*BGPPeer) SetAmazonAddress ¶

func (s *BGPPeer) SetAmazonAddress(v string) *BGPPeer

SetAmazonAddress sets the AmazonAddress field's value.

func (*BGPPeer) SetAsn ¶

func (s *BGPPeer) SetAsn(v int64) *BGPPeer

SetAsn sets the Asn field's value.

func (*BGPPeer) SetAuthKey ¶

func (s *BGPPeer) SetAuthKey(v string) *BGPPeer

SetAuthKey sets the AuthKey field's value.

func (*BGPPeer) SetAwsDeviceV2 ¶

func (s *BGPPeer) SetAwsDeviceV2(v string) *BGPPeer

SetAwsDeviceV2 sets the AwsDeviceV2 field's value.

func (*BGPPeer) SetAwsLogicalDeviceId ¶

func (s *BGPPeer) SetAwsLogicalDeviceId(v string) *BGPPeer

SetAwsLogicalDeviceId sets the AwsLogicalDeviceId field's value.

func (*BGPPeer) SetBgpPeerId ¶

func (s *BGPPeer) SetBgpPeerId(v string) *BGPPeer

SetBgpPeerId sets the BgpPeerId field's value.

func (*BGPPeer) SetBgpPeerState ¶

func (s *BGPPeer) SetBgpPeerState(v string) *BGPPeer

SetBgpPeerState sets the BgpPeerState field's value.

func (*BGPPeer) SetBgpStatus ¶

func (s *BGPPeer) SetBgpStatus(v string) *BGPPeer

SetBgpStatus sets the BgpStatus field's value.

func (*BGPPeer) SetCustomerAddress ¶

func (s *BGPPeer) SetCustomerAddress(v string) *BGPPeer

SetCustomerAddress sets the CustomerAddress field's value.

func (BGPPeer) String ¶

func (s BGPPeer) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ClientException ¶

type ClientException struct {
    RespMetadata protocol.ResponseMetadata `json:"-" xml:"-"`

    Message_ *string `locationName:"message" type:"string"`
    // contains filtered or unexported fields
}

One or more parameters are not valid.

func (*ClientException) Code ¶

func (s *ClientException) Code() string

Code returns the exception type name.

func (*ClientException) Error ¶

func (s *ClientException) Error() string

func (ClientException) GoString ¶

func (s ClientException) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ClientException) Message ¶

func (s *ClientException) Message() string

Message returns the exception's message.

func (*ClientException) OrigErr ¶

func (s *ClientException) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*ClientException) RequestID ¶

func (s *ClientException) RequestID() string

RequestID returns the service's response RequestID for request.

func (*ClientException) StatusCode ¶

func (s *ClientException) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (ClientException) String ¶

func (s ClientException) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConfirmConnectionInput ¶

type ConfirmConnectionInput struct {

    // The ID of the hosted connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ConfirmConnectionInput) GoString ¶

func (s ConfirmConnectionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmConnectionInput) SetConnectionId ¶

func (s *ConfirmConnectionInput) SetConnectionId(v string) *ConfirmConnectionInput

SetConnectionId sets the ConnectionId field's value.

func (ConfirmConnectionInput) String ¶

func (s ConfirmConnectionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmConnectionInput) Validate ¶

func (s *ConfirmConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConfirmConnectionOutput ¶

type ConfirmConnectionOutput struct {

    // The state of the connection. The following are the possible values:
    //
    //    * ordering: The initial state of a hosted connection provisioned on an
    //    interconnect. The connection stays in the ordering state until the owner
    //    of the hosted connection confirms or declines the connection order.
    //
    //    * requested: The initial state of a standard connection. The connection
    //    stays in the requested state until the Letter of Authorization (LOA) is
    //    sent to the customer.
    //
    //    * pending: The connection has been approved and is being initialized.
    //
    //    * available: The network link is up and the connection is ready for use.
    //
    //    * down: The network link is down.
    //
    //    * deleting: The connection is being deleted.
    //
    //    * deleted: The connection has been deleted.
    //
    //    * rejected: A hosted connection in the ordering state enters the rejected
    //    state if it is deleted by the customer.
    //
    //    * unknown: The state of the connection is not available.
    ConnectionState *string `locationName:"connectionState" type:"string" enum:"ConnectionState"`
    // contains filtered or unexported fields
}

func (ConfirmConnectionOutput) GoString ¶

func (s ConfirmConnectionOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmConnectionOutput) SetConnectionState ¶

func (s *ConfirmConnectionOutput) SetConnectionState(v string) *ConfirmConnectionOutput

SetConnectionState sets the ConnectionState field's value.

func (ConfirmConnectionOutput) String ¶

func (s ConfirmConnectionOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConfirmCustomerAgreementInput ¶

type ConfirmCustomerAgreementInput struct {

    // The name of the customer agreement.
    AgreementName *string `locationName:"agreementName" type:"string"`
    // contains filtered or unexported fields
}

func (ConfirmCustomerAgreementInput) GoString ¶

func (s ConfirmCustomerAgreementInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmCustomerAgreementInput) SetAgreementName ¶

func (s *ConfirmCustomerAgreementInput) SetAgreementName(v string) *ConfirmCustomerAgreementInput

SetAgreementName sets the AgreementName field's value.

func (ConfirmCustomerAgreementInput) String ¶

func (s ConfirmCustomerAgreementInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConfirmCustomerAgreementOutput ¶

type ConfirmCustomerAgreementOutput struct {

    // The status of the customer agreement when the connection was created. This
    // will be either signed or unsigned.
    Status *string `locationName:"status" type:"string"`
    // contains filtered or unexported fields
}

func (ConfirmCustomerAgreementOutput) GoString ¶

func (s ConfirmCustomerAgreementOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmCustomerAgreementOutput) SetStatus ¶

func (s *ConfirmCustomerAgreementOutput) SetStatus(v string) *ConfirmCustomerAgreementOutput

SetStatus sets the Status field's value.

func (ConfirmCustomerAgreementOutput) String ¶

func (s ConfirmCustomerAgreementOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConfirmPrivateVirtualInterfaceInput ¶

type ConfirmPrivateVirtualInterfaceInput struct {

    // The ID of the Direct Connect gateway.
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string"`

    // The ID of the virtual private gateway.
    VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string"`

    // The ID of the virtual interface.
    //
    // VirtualInterfaceId is a required field
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ConfirmPrivateVirtualInterfaceInput) GoString ¶

func (s ConfirmPrivateVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmPrivateVirtualInterfaceInput) SetDirectConnectGatewayId ¶

func (s *ConfirmPrivateVirtualInterfaceInput) SetDirectConnectGatewayId(v string) *ConfirmPrivateVirtualInterfaceInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*ConfirmPrivateVirtualInterfaceInput) SetVirtualGatewayId ¶

func (s *ConfirmPrivateVirtualInterfaceInput) SetVirtualGatewayId(v string) *ConfirmPrivateVirtualInterfaceInput

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (*ConfirmPrivateVirtualInterfaceInput) SetVirtualInterfaceId ¶

func (s *ConfirmPrivateVirtualInterfaceInput) SetVirtualInterfaceId(v string) *ConfirmPrivateVirtualInterfaceInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (ConfirmPrivateVirtualInterfaceInput) String ¶

func (s ConfirmPrivateVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmPrivateVirtualInterfaceInput) Validate ¶

func (s *ConfirmPrivateVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConfirmPrivateVirtualInterfaceOutput ¶

type ConfirmPrivateVirtualInterfaceOutput struct {

    // The state of the virtual interface. The following are the possible values:
    //
    //    * confirming: The creation of the virtual interface is pending confirmation
    //    from the virtual interface owner. If the owner of the virtual interface
    //    is different from the owner of the connection on which it is provisioned,
    //    then the virtual interface will remain in this state until it is confirmed
    //    by the virtual interface owner.
    //
    //    * verifying: This state only applies to public virtual interfaces. Each
    //    public virtual interface needs validation before the virtual interface
    //    can be created.
    //
    //    * pending: A virtual interface is in this state from the time that it
    //    is created until the virtual interface is ready to forward traffic.
    //
    //    * available: A virtual interface that is able to forward traffic.
    //
    //    * down: A virtual interface that is BGP down.
    //
    //    * deleting: A virtual interface is in this state immediately after calling
    //    DeleteVirtualInterface until it can no longer forward traffic.
    //
    //    * deleted: A virtual interface that cannot forward traffic.
    //
    //    * rejected: The virtual interface owner has declined creation of the virtual
    //    interface. If a virtual interface in the Confirming state is deleted by
    //    the virtual interface owner, the virtual interface enters the Rejected
    //    state.
    //
    //    * unknown: The state of the virtual interface is not available.
    VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`
    // contains filtered or unexported fields
}

func (ConfirmPrivateVirtualInterfaceOutput) GoString ¶

func (s ConfirmPrivateVirtualInterfaceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmPrivateVirtualInterfaceOutput) SetVirtualInterfaceState ¶

func (s *ConfirmPrivateVirtualInterfaceOutput) SetVirtualInterfaceState(v string) *ConfirmPrivateVirtualInterfaceOutput

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (ConfirmPrivateVirtualInterfaceOutput) String ¶

func (s ConfirmPrivateVirtualInterfaceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConfirmPublicVirtualInterfaceInput ¶

type ConfirmPublicVirtualInterfaceInput struct {

    // The ID of the virtual interface.
    //
    // VirtualInterfaceId is a required field
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ConfirmPublicVirtualInterfaceInput) GoString ¶

func (s ConfirmPublicVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmPublicVirtualInterfaceInput) SetVirtualInterfaceId ¶

func (s *ConfirmPublicVirtualInterfaceInput) SetVirtualInterfaceId(v string) *ConfirmPublicVirtualInterfaceInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (ConfirmPublicVirtualInterfaceInput) String ¶

func (s ConfirmPublicVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmPublicVirtualInterfaceInput) Validate ¶

func (s *ConfirmPublicVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConfirmPublicVirtualInterfaceOutput ¶

type ConfirmPublicVirtualInterfaceOutput struct {

    // The state of the virtual interface. The following are the possible values:
    //
    //    * confirming: The creation of the virtual interface is pending confirmation
    //    from the virtual interface owner. If the owner of the virtual interface
    //    is different from the owner of the connection on which it is provisioned,
    //    then the virtual interface will remain in this state until it is confirmed
    //    by the virtual interface owner.
    //
    //    * verifying: This state only applies to public virtual interfaces. Each
    //    public virtual interface needs validation before the virtual interface
    //    can be created.
    //
    //    * pending: A virtual interface is in this state from the time that it
    //    is created until the virtual interface is ready to forward traffic.
    //
    //    * available: A virtual interface that is able to forward traffic.
    //
    //    * down: A virtual interface that is BGP down.
    //
    //    * deleting: A virtual interface is in this state immediately after calling
    //    DeleteVirtualInterface until it can no longer forward traffic.
    //
    //    * deleted: A virtual interface that cannot forward traffic.
    //
    //    * rejected: The virtual interface owner has declined creation of the virtual
    //    interface. If a virtual interface in the Confirming state is deleted by
    //    the virtual interface owner, the virtual interface enters the Rejected
    //    state.
    //
    //    * unknown: The state of the virtual interface is not available.
    VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`
    // contains filtered or unexported fields
}

func (ConfirmPublicVirtualInterfaceOutput) GoString ¶

func (s ConfirmPublicVirtualInterfaceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmPublicVirtualInterfaceOutput) SetVirtualInterfaceState ¶

func (s *ConfirmPublicVirtualInterfaceOutput) SetVirtualInterfaceState(v string) *ConfirmPublicVirtualInterfaceOutput

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (ConfirmPublicVirtualInterfaceOutput) String ¶

func (s ConfirmPublicVirtualInterfaceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type ConfirmTransitVirtualInterfaceInput ¶

type ConfirmTransitVirtualInterfaceInput struct {

    // The ID of the Direct Connect gateway.
    //
    // DirectConnectGatewayId is a required field
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string" required:"true"`

    // The ID of the virtual interface.
    //
    // VirtualInterfaceId is a required field
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ConfirmTransitVirtualInterfaceInput) GoString ¶

func (s ConfirmTransitVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmTransitVirtualInterfaceInput) SetDirectConnectGatewayId ¶

func (s *ConfirmTransitVirtualInterfaceInput) SetDirectConnectGatewayId(v string) *ConfirmTransitVirtualInterfaceInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*ConfirmTransitVirtualInterfaceInput) SetVirtualInterfaceId ¶

func (s *ConfirmTransitVirtualInterfaceInput) SetVirtualInterfaceId(v string) *ConfirmTransitVirtualInterfaceInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (ConfirmTransitVirtualInterfaceInput) String ¶

func (s ConfirmTransitVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmTransitVirtualInterfaceInput) Validate ¶

func (s *ConfirmTransitVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConfirmTransitVirtualInterfaceOutput ¶

type ConfirmTransitVirtualInterfaceOutput struct {

    // The state of the virtual interface. The following are the possible values:
    //
    //    * confirming: The creation of the virtual interface is pending confirmation
    //    from the virtual interface owner. If the owner of the virtual interface
    //    is different from the owner of the connection on which it is provisioned,
    //    then the virtual interface will remain in this state until it is confirmed
    //    by the virtual interface owner.
    //
    //    * verifying: This state only applies to public virtual interfaces. Each
    //    public virtual interface needs validation before the virtual interface
    //    can be created.
    //
    //    * pending: A virtual interface is in this state from the time that it
    //    is created until the virtual interface is ready to forward traffic.
    //
    //    * available: A virtual interface that is able to forward traffic.
    //
    //    * down: A virtual interface that is BGP down.
    //
    //    * deleting: A virtual interface is in this state immediately after calling
    //    DeleteVirtualInterface until it can no longer forward traffic.
    //
    //    * deleted: A virtual interface that cannot forward traffic.
    //
    //    * rejected: The virtual interface owner has declined creation of the virtual
    //    interface. If a virtual interface in the Confirming state is deleted by
    //    the virtual interface owner, the virtual interface enters the Rejected
    //    state.
    //
    //    * unknown: The state of the virtual interface is not available.
    VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`
    // contains filtered or unexported fields
}

func (ConfirmTransitVirtualInterfaceOutput) GoString ¶

func (s ConfirmTransitVirtualInterfaceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ConfirmTransitVirtualInterfaceOutput) SetVirtualInterfaceState ¶

func (s *ConfirmTransitVirtualInterfaceOutput) SetVirtualInterfaceState(v string) *ConfirmTransitVirtualInterfaceOutput

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (ConfirmTransitVirtualInterfaceOutput) String ¶

func (s ConfirmTransitVirtualInterfaceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type Connection ¶

type Connection struct {

    // The Direct Connect endpoint on which the physical connection terminates.
    AwsDevice *string `locationName:"awsDevice" deprecated:"true" type:"string"`

    // The Direct Connect endpoint that terminates the physical connection.
    AwsDeviceV2 *string `locationName:"awsDeviceV2" type:"string"`

    // The Direct Connect endpoint that terminates the logical connection. This
    // device might be different than the device that terminates the physical connection.
    AwsLogicalDeviceId *string `locationName:"awsLogicalDeviceId" type:"string"`

    // The bandwidth of the connection.
    Bandwidth *string `locationName:"bandwidth" type:"string"`

    // The ID of the connection.
    ConnectionId *string `locationName:"connectionId" type:"string"`

    // The name of the connection.
    ConnectionName *string `locationName:"connectionName" type:"string"`

    // The state of the connection. The following are the possible values:
    //
    //    * ordering: The initial state of a hosted connection provisioned on an
    //    interconnect. The connection stays in the ordering state until the owner
    //    of the hosted connection confirms or declines the connection order.
    //
    //    * requested: The initial state of a standard connection. The connection
    //    stays in the requested state until the Letter of Authorization (LOA) is
    //    sent to the customer.
    //
    //    * pending: The connection has been approved and is being initialized.
    //
    //    * available: The network link is up and the connection is ready for use.
    //
    //    * down: The network link is down.
    //
    //    * deleting: The connection is being deleted.
    //
    //    * deleted: The connection has been deleted.
    //
    //    * rejected: A hosted connection in the ordering state enters the rejected
    //    state if it is deleted by the customer.
    //
    //    * unknown: The state of the connection is not available.
    ConnectionState *string `locationName:"connectionState" type:"string" enum:"ConnectionState"`

    // The MAC Security (MACsec) connection encryption mode.
    //
    // The valid values are no_encrypt, should_encrypt, and must_encrypt.
    EncryptionMode *string `locationName:"encryptionMode" type:"string"`

    // Indicates whether the connection supports a secondary BGP peer in the same
    // address family (IPv4/IPv6).
    HasLogicalRedundancy *string `locationName:"hasLogicalRedundancy" type:"string" enum:"HasLogicalRedundancy"`

    // Indicates whether jumbo frames are supported.
    JumboFrameCapable *bool `locationName:"jumboFrameCapable" type:"boolean"`

    // The ID of the LAG.
    LagId *string `locationName:"lagId" type:"string"`

    // The time of the most recent call to DescribeLoa for this connection.
    LoaIssueTime *time.Time `locationName:"loaIssueTime" type:"timestamp"`

    // The location of the connection.
    Location *string `locationName:"location" type:"string"`

    // Indicates whether the connection supports MAC Security (MACsec).
    MacSecCapable *bool `locationName:"macSecCapable" type:"boolean"`

    // The MAC Security (MACsec) security keys associated with the connection.
    MacSecKeys []*MacSecKey `locationName:"macSecKeys" type:"list"`

    // The ID of the Amazon Web Services account that owns the connection.
    OwnerAccount *string `locationName:"ownerAccount" type:"string"`

    // The name of the Direct Connect service provider associated with the connection.
    PartnerName *string `locationName:"partnerName" type:"string"`

    // The MAC Security (MACsec) port link status of the connection.
    //
    // The valid values are Encryption Up, which means that there is an active Connection
    // Key Name, or Encryption Down.
    PortEncryptionStatus *string `locationName:"portEncryptionStatus" type:"string"`

    // The name of the service provider associated with the connection.
    ProviderName *string `locationName:"providerName" type:"string"`

    // The Amazon Web Services Region where the connection is located.
    Region *string `locationName:"region" type:"string"`

    // The tags associated with the connection.
    Tags []*Tag `locationName:"tags" min:"1" type:"list"`

    // The ID of the VLAN.
    Vlan *int64 `locationName:"vlan" type:"integer"`
    // contains filtered or unexported fields
}

Information about an Direct Connect connection.

func (Connection) GoString ¶

func (s Connection) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Connection) SetAwsDevice ¶

func (s *Connection) SetAwsDevice(v string) *Connection

SetAwsDevice sets the AwsDevice field's value.

func (*Connection) SetAwsDeviceV2 ¶

func (s *Connection) SetAwsDeviceV2(v string) *Connection

SetAwsDeviceV2 sets the AwsDeviceV2 field's value.

func (*Connection) SetAwsLogicalDeviceId ¶

func (s *Connection) SetAwsLogicalDeviceId(v string) *Connection

SetAwsLogicalDeviceId sets the AwsLogicalDeviceId field's value.

func (*Connection) SetBandwidth ¶

func (s *Connection) SetBandwidth(v string) *Connection

SetBandwidth sets the Bandwidth field's value.

func (*Connection) SetConnectionId ¶

func (s *Connection) SetConnectionId(v string) *Connection

SetConnectionId sets the ConnectionId field's value.

func (*Connection) SetConnectionName ¶

func (s *Connection) SetConnectionName(v string) *Connection

SetConnectionName sets the ConnectionName field's value.

func (*Connection) SetConnectionState ¶

func (s *Connection) SetConnectionState(v string) *Connection

SetConnectionState sets the ConnectionState field's value.

func (*Connection) SetEncryptionMode ¶

func (s *Connection) SetEncryptionMode(v string) *Connection

SetEncryptionMode sets the EncryptionMode field's value.

func (*Connection) SetHasLogicalRedundancy ¶

func (s *Connection) SetHasLogicalRedundancy(v string) *Connection

SetHasLogicalRedundancy sets the HasLogicalRedundancy field's value.

func (*Connection) SetJumboFrameCapable ¶

func (s *Connection) SetJumboFrameCapable(v bool) *Connection

SetJumboFrameCapable sets the JumboFrameCapable field's value.

func (*Connection) SetLagId ¶

func (s *Connection) SetLagId(v string) *Connection

SetLagId sets the LagId field's value.

func (*Connection) SetLoaIssueTime ¶

func (s *Connection) SetLoaIssueTime(v time.Time) *Connection

SetLoaIssueTime sets the LoaIssueTime field's value.

func (*Connection) SetLocation ¶

func (s *Connection) SetLocation(v string) *Connection

SetLocation sets the Location field's value.

func (*Connection) SetMacSecCapable ¶

func (s *Connection) SetMacSecCapable(v bool) *Connection

SetMacSecCapable sets the MacSecCapable field's value.

func (*Connection) SetMacSecKeys ¶

func (s *Connection) SetMacSecKeys(v []*MacSecKey) *Connection

SetMacSecKeys sets the MacSecKeys field's value.

func (*Connection) SetOwnerAccount ¶

func (s *Connection) SetOwnerAccount(v string) *Connection

SetOwnerAccount sets the OwnerAccount field's value.

func (*Connection) SetPartnerName ¶

func (s *Connection) SetPartnerName(v string) *Connection

SetPartnerName sets the PartnerName field's value.

func (*Connection) SetPortEncryptionStatus ¶

func (s *Connection) SetPortEncryptionStatus(v string) *Connection

SetPortEncryptionStatus sets the PortEncryptionStatus field's value.

func (*Connection) SetProviderName ¶

func (s *Connection) SetProviderName(v string) *Connection

SetProviderName sets the ProviderName field's value.

func (*Connection) SetRegion ¶

func (s *Connection) SetRegion(v string) *Connection

SetRegion sets the Region field's value.

func (*Connection) SetTags ¶

func (s *Connection) SetTags(v []*Tag) *Connection

SetTags sets the Tags field's value.

func (*Connection) SetVlan ¶

func (s *Connection) SetVlan(v int64) *Connection

SetVlan sets the Vlan field's value.

func (Connection) String ¶

func (s Connection) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type Connections ¶

type Connections struct {

    // The connections.
    Connections []*Connection `locationName:"connections" type:"list"`
    // contains filtered or unexported fields
}

func (Connections) GoString ¶

func (s Connections) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Connections) SetConnections ¶

func (s *Connections) SetConnections(v []*Connection) *Connections

SetConnections sets the Connections field's value.

func (Connections) String ¶

func (s Connections) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateBGPPeerInput ¶

type CreateBGPPeerInput struct {

    // Information about the BGP peer.
    NewBGPPeer *NewBGPPeer `locationName:"newBGPPeer" type:"structure"`

    // The ID of the virtual interface.
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`
    // contains filtered or unexported fields
}

func (CreateBGPPeerInput) GoString ¶

func (s CreateBGPPeerInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateBGPPeerInput) SetNewBGPPeer ¶

func (s *CreateBGPPeerInput) SetNewBGPPeer(v *NewBGPPeer) *CreateBGPPeerInput

SetNewBGPPeer sets the NewBGPPeer field's value.

func (*CreateBGPPeerInput) SetVirtualInterfaceId ¶

func (s *CreateBGPPeerInput) SetVirtualInterfaceId(v string) *CreateBGPPeerInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (CreateBGPPeerInput) String ¶

func (s CreateBGPPeerInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateBGPPeerOutput ¶

type CreateBGPPeerOutput struct {

    // The virtual interface.
    VirtualInterface *VirtualInterface `locationName:"virtualInterface" type:"structure"`
    // contains filtered or unexported fields
}

func (CreateBGPPeerOutput) GoString ¶

func (s CreateBGPPeerOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateBGPPeerOutput) SetVirtualInterface ¶

func (s *CreateBGPPeerOutput) SetVirtualInterface(v *VirtualInterface) *CreateBGPPeerOutput

SetVirtualInterface sets the VirtualInterface field's value.

func (CreateBGPPeerOutput) String ¶

func (s CreateBGPPeerOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateConnectionInput ¶

type CreateConnectionInput struct {

    // The bandwidth of the connection.
    //
    // Bandwidth is a required field
    Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

    // The name of the connection.
    //
    // ConnectionName is a required field
    ConnectionName *string `locationName:"connectionName" type:"string" required:"true"`

    // The ID of the LAG.
    LagId *string `locationName:"lagId" type:"string"`

    // The location of the connection.
    //
    // Location is a required field
    Location *string `locationName:"location" type:"string" required:"true"`

    // The name of the service provider associated with the requested connection.
    ProviderName *string `locationName:"providerName" type:"string"`

    // Indicates whether you want the connection to support MAC Security (MACsec).
    //
    // MAC Security (MACsec) is only available on dedicated connections. For information
    // about MAC Security (MACsec) prerequisties, see MACsec prerequisties (https://docs.aws.amazon.com/directconnect/latest/UserGuide/direct-connect-mac-sec-getting-started.html#mac-sec-prerequisites)
    // in the Direct Connect User Guide.
    RequestMACSec *bool `locationName:"requestMACSec" type:"boolean"`

    // The tags to associate with the lag.
    Tags []*Tag `locationName:"tags" min:"1" type:"list"`
    // contains filtered or unexported fields
}

func (CreateConnectionInput) GoString ¶

func (s CreateConnectionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateConnectionInput) SetBandwidth ¶

func (s *CreateConnectionInput) SetBandwidth(v string) *CreateConnectionInput

SetBandwidth sets the Bandwidth field's value.

func (*CreateConnectionInput) SetConnectionName ¶

func (s *CreateConnectionInput) SetConnectionName(v string) *CreateConnectionInput

SetConnectionName sets the ConnectionName field's value.

func (*CreateConnectionInput) SetLagId ¶

func (s *CreateConnectionInput) SetLagId(v string) *CreateConnectionInput

SetLagId sets the LagId field's value.

func (*CreateConnectionInput) SetLocation ¶

func (s *CreateConnectionInput) SetLocation(v string) *CreateConnectionInput

SetLocation sets the Location field's value.

func (*CreateConnectionInput) SetProviderName ¶

func (s *CreateConnectionInput) SetProviderName(v string) *CreateConnectionInput

SetProviderName sets the ProviderName field's value.

func (*CreateConnectionInput) SetRequestMACSec ¶

func (s *CreateConnectionInput) SetRequestMACSec(v bool) *CreateConnectionInput

SetRequestMACSec sets the RequestMACSec field's value.

func (*CreateConnectionInput) SetTags ¶

func (s *CreateConnectionInput) SetTags(v []*Tag) *CreateConnectionInput

SetTags sets the Tags field's value.

func (CreateConnectionInput) String ¶

func (s CreateConnectionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateConnectionInput) Validate ¶

func (s *CreateConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDirectConnectGatewayAssociationInput ¶

type CreateDirectConnectGatewayAssociationInput struct {

    // The Amazon VPC prefixes to advertise to the Direct Connect gateway
    //
    // This parameter is required when you create an association to a transit gateway.
    //
    // For information about how to set the prefixes, see Allowed Prefixes (https://docs.aws.amazon.com/directconnect/latest/UserGuide/multi-account-associate-vgw.html#allowed-prefixes)
    // in the Direct Connect User Guide.
    AddAllowedPrefixesToDirectConnectGateway []*RouteFilterPrefix `locationName:"addAllowedPrefixesToDirectConnectGateway" type:"list"`

    // The ID of the Direct Connect gateway.
    //
    // DirectConnectGatewayId is a required field
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string" required:"true"`

    // The ID of the virtual private gateway or transit gateway.
    GatewayId *string `locationName:"gatewayId" type:"string"`

    // The ID of the virtual private gateway.
    VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string"`
    // contains filtered or unexported fields
}

func (CreateDirectConnectGatewayAssociationInput) GoString ¶

func (s CreateDirectConnectGatewayAssociationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayAssociationInput) SetAddAllowedPrefixesToDirectConnectGateway ¶

func (s *CreateDirectConnectGatewayAssociationInput) SetAddAllowedPrefixesToDirectConnectGateway(v []*RouteFilterPrefix) *CreateDirectConnectGatewayAssociationInput

SetAddAllowedPrefixesToDirectConnectGateway sets the AddAllowedPrefixesToDirectConnectGateway field's value.

func (*CreateDirectConnectGatewayAssociationInput) SetDirectConnectGatewayId ¶

func (s *CreateDirectConnectGatewayAssociationInput) SetDirectConnectGatewayId(v string) *CreateDirectConnectGatewayAssociationInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*CreateDirectConnectGatewayAssociationInput) SetGatewayId ¶

func (s *CreateDirectConnectGatewayAssociationInput) SetGatewayId(v string) *CreateDirectConnectGatewayAssociationInput

SetGatewayId sets the GatewayId field's value.

func (*CreateDirectConnectGatewayAssociationInput) SetVirtualGatewayId ¶

func (s *CreateDirectConnectGatewayAssociationInput) SetVirtualGatewayId(v string) *CreateDirectConnectGatewayAssociationInput

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (CreateDirectConnectGatewayAssociationInput) String ¶

func (s CreateDirectConnectGatewayAssociationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayAssociationInput) Validate ¶

func (s *CreateDirectConnectGatewayAssociationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDirectConnectGatewayAssociationOutput ¶

type CreateDirectConnectGatewayAssociationOutput struct {

    // The association to be created.
    DirectConnectGatewayAssociation *GatewayAssociation `locationName:"directConnectGatewayAssociation" type:"structure"`
    // contains filtered or unexported fields
}

func (CreateDirectConnectGatewayAssociationOutput) GoString ¶

func (s CreateDirectConnectGatewayAssociationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayAssociationOutput) SetDirectConnectGatewayAssociation ¶

func (s *CreateDirectConnectGatewayAssociationOutput) SetDirectConnectGatewayAssociation(v *GatewayAssociation) *CreateDirectConnectGatewayAssociationOutput

SetDirectConnectGatewayAssociation sets the DirectConnectGatewayAssociation field's value.

func (CreateDirectConnectGatewayAssociationOutput) String ¶

func (s CreateDirectConnectGatewayAssociationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateDirectConnectGatewayAssociationProposalInput ¶

type CreateDirectConnectGatewayAssociationProposalInput struct {

    // The Amazon VPC prefixes to advertise to the Direct Connect gateway.
    AddAllowedPrefixesToDirectConnectGateway []*RouteFilterPrefix `locationName:"addAllowedPrefixesToDirectConnectGateway" type:"list"`

    // The ID of the Direct Connect gateway.
    //
    // DirectConnectGatewayId is a required field
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string" required:"true"`

    // The ID of the Amazon Web Services account that owns the Direct Connect gateway.
    //
    // DirectConnectGatewayOwnerAccount is a required field
    DirectConnectGatewayOwnerAccount *string `locationName:"directConnectGatewayOwnerAccount" type:"string" required:"true"`

    // The ID of the virtual private gateway or transit gateway.
    //
    // GatewayId is a required field
    GatewayId *string `locationName:"gatewayId" type:"string" required:"true"`

    // The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.
    RemoveAllowedPrefixesToDirectConnectGateway []*RouteFilterPrefix `locationName:"removeAllowedPrefixesToDirectConnectGateway" type:"list"`
    // contains filtered or unexported fields
}

func (CreateDirectConnectGatewayAssociationProposalInput) GoString ¶

func (s CreateDirectConnectGatewayAssociationProposalInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayAssociationProposalInput) SetAddAllowedPrefixesToDirectConnectGateway ¶

func (s *CreateDirectConnectGatewayAssociationProposalInput) SetAddAllowedPrefixesToDirectConnectGateway(v []*RouteFilterPrefix) *CreateDirectConnectGatewayAssociationProposalInput

SetAddAllowedPrefixesToDirectConnectGateway sets the AddAllowedPrefixesToDirectConnectGateway field's value.

func (*CreateDirectConnectGatewayAssociationProposalInput) SetDirectConnectGatewayId ¶

func (s *CreateDirectConnectGatewayAssociationProposalInput) SetDirectConnectGatewayId(v string) *CreateDirectConnectGatewayAssociationProposalInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*CreateDirectConnectGatewayAssociationProposalInput) SetDirectConnectGatewayOwnerAccount ¶

func (s *CreateDirectConnectGatewayAssociationProposalInput) SetDirectConnectGatewayOwnerAccount(v string) *CreateDirectConnectGatewayAssociationProposalInput

SetDirectConnectGatewayOwnerAccount sets the DirectConnectGatewayOwnerAccount field's value.

func (*CreateDirectConnectGatewayAssociationProposalInput) SetGatewayId ¶

func (s *CreateDirectConnectGatewayAssociationProposalInput) SetGatewayId(v string) *CreateDirectConnectGatewayAssociationProposalInput

SetGatewayId sets the GatewayId field's value.

func (*CreateDirectConnectGatewayAssociationProposalInput) SetRemoveAllowedPrefixesToDirectConnectGateway ¶

func (s *CreateDirectConnectGatewayAssociationProposalInput) SetRemoveAllowedPrefixesToDirectConnectGateway(v []*RouteFilterPrefix) *CreateDirectConnectGatewayAssociationProposalInput

SetRemoveAllowedPrefixesToDirectConnectGateway sets the RemoveAllowedPrefixesToDirectConnectGateway field's value.

func (CreateDirectConnectGatewayAssociationProposalInput) String ¶

func (s CreateDirectConnectGatewayAssociationProposalInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayAssociationProposalInput) Validate ¶

func (s *CreateDirectConnectGatewayAssociationProposalInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDirectConnectGatewayAssociationProposalOutput ¶

type CreateDirectConnectGatewayAssociationProposalOutput struct {

    // Information about the Direct Connect gateway proposal.
    DirectConnectGatewayAssociationProposal *GatewayAssociationProposal `locationName:"directConnectGatewayAssociationProposal" type:"structure"`
    // contains filtered or unexported fields
}

func (CreateDirectConnectGatewayAssociationProposalOutput) GoString ¶

func (s CreateDirectConnectGatewayAssociationProposalOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayAssociationProposalOutput) SetDirectConnectGatewayAssociationProposal ¶

func (s *CreateDirectConnectGatewayAssociationProposalOutput) SetDirectConnectGatewayAssociationProposal(v *GatewayAssociationProposal) *CreateDirectConnectGatewayAssociationProposalOutput

SetDirectConnectGatewayAssociationProposal sets the DirectConnectGatewayAssociationProposal field's value.

func (CreateDirectConnectGatewayAssociationProposalOutput) String ¶

func (s CreateDirectConnectGatewayAssociationProposalOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateDirectConnectGatewayInput ¶

type CreateDirectConnectGatewayInput struct {

    // The autonomous system number (ASN) for Border Gateway Protocol (BGP) to be
    // configured on the Amazon side of the connection. The ASN must be in the private
    // range of 64,512 to 65,534 or 4,200,000,000 to 4,294,967,294. The default
    // is 64512.
    AmazonSideAsn *int64 `locationName:"amazonSideAsn" type:"long"`

    // The name of the Direct Connect gateway.
    //
    // DirectConnectGatewayName is a required field
    DirectConnectGatewayName *string `locationName:"directConnectGatewayName" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CreateDirectConnectGatewayInput) GoString ¶

func (s CreateDirectConnectGatewayInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayInput) SetAmazonSideAsn ¶

func (s *CreateDirectConnectGatewayInput) SetAmazonSideAsn(v int64) *CreateDirectConnectGatewayInput

SetAmazonSideAsn sets the AmazonSideAsn field's value.

func (*CreateDirectConnectGatewayInput) SetDirectConnectGatewayName ¶

func (s *CreateDirectConnectGatewayInput) SetDirectConnectGatewayName(v string) *CreateDirectConnectGatewayInput

SetDirectConnectGatewayName sets the DirectConnectGatewayName field's value.

func (CreateDirectConnectGatewayInput) String ¶

func (s CreateDirectConnectGatewayInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayInput) Validate ¶

func (s *CreateDirectConnectGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateDirectConnectGatewayOutput ¶

type CreateDirectConnectGatewayOutput struct {

    // The Direct Connect gateway.
    DirectConnectGateway *Gateway `locationName:"directConnectGateway" type:"structure"`
    // contains filtered or unexported fields
}

func (CreateDirectConnectGatewayOutput) GoString ¶

func (s CreateDirectConnectGatewayOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDirectConnectGatewayOutput) SetDirectConnectGateway ¶

func (s *CreateDirectConnectGatewayOutput) SetDirectConnectGateway(v *Gateway) *CreateDirectConnectGatewayOutput

SetDirectConnectGateway sets the DirectConnectGateway field's value.

func (CreateDirectConnectGatewayOutput) String ¶

func (s CreateDirectConnectGatewayOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CreateInterconnectInput ¶

type CreateInterconnectInput struct {

    // The port bandwidth, in Gbps. The possible values are 1, 10, and 100.
    //
    // Bandwidth is a required field
    Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

    // The name of the interconnect.
    //
    // InterconnectName is a required field
    InterconnectName *string `locationName:"interconnectName" type:"string" required:"true"`

    // The ID of the LAG.
    LagId *string `locationName:"lagId" type:"string"`

    // The location of the interconnect.
    //
    // Location is a required field
    Location *string `locationName:"location" type:"string" required:"true"`

    // The name of the service provider associated with the interconnect.
    ProviderName *string `locationName:"providerName" type:"string"`

    // The tags to associate with the interconnect.
    Tags []*Tag `locationName:"tags" min:"1" type:"list"`
    // contains filtered or unexported fields
}

func (CreateInterconnectInput) GoString ¶

func (s CreateInterconnectInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateInterconnectInput) SetBandwidth ¶

func (s *CreateInterconnectInput) SetBandwidth(v string) *CreateInterconnectInput

SetBandwidth sets the Bandwidth field's value.

func (*CreateInterconnectInput) SetInterconnectName ¶

func (s *CreateInterconnectInput) SetInterconnectName(v string) *CreateInterconnectInput

SetInterconnectName sets the InterconnectName field's value.

func (*CreateInterconnectInput) SetLagId ¶

func (s *CreateInterconnectInput) SetLagId(v string) *CreateInterconnectInput

SetLagId sets the LagId field's value.

func (*CreateInterconnectInput) SetLocation ¶

func (s *CreateInterconnectInput) SetLocation(v string) *CreateInterconnectInput

SetLocation sets the Location field's value.

func (*CreateInterconnectInput) SetProviderName ¶

func (s *CreateInterconnectInput) SetProviderName(v string) *CreateInterconnectInput

SetProviderName sets the ProviderName field's value.

func (*CreateInterconnectInput) SetTags ¶

func (s *CreateInterconnectInput) SetTags(v []*Tag) *CreateInterconnectInput

SetTags sets the Tags field's value.

func (CreateInterconnectInput) String ¶

func (s CreateInterconnectInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateInterconnectInput) Validate ¶

func (s *CreateInterconnectInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateLagInput ¶

type CreateLagInput struct {

    // The tags to associate with the automtically created LAGs.
    ChildConnectionTags []*Tag `locationName:"childConnectionTags" min:"1" type:"list"`

    // The ID of an existing dedicated connection to migrate to the LAG.
    ConnectionId *string `locationName:"connectionId" type:"string"`

    // The bandwidth of the individual physical dedicated connections bundled by
    // the LAG. The possible values are 1Gbps,10Gbps, 100Gbps, and 400Gbps.
    //
    // ConnectionsBandwidth is a required field
    ConnectionsBandwidth *string `locationName:"connectionsBandwidth" type:"string" required:"true"`

    // The name of the LAG.
    //
    // LagName is a required field
    LagName *string `locationName:"lagName" type:"string" required:"true"`

    // The location for the LAG.
    //
    // Location is a required field
    Location *string `locationName:"location" type:"string" required:"true"`

    // The number of physical dedicated connections initially provisioned and bundled
    // by the LAG. You can have a maximum of four connections when the port speed
    // is 1Gbps or 10Gbps, or two when the port speed is 100Gbps or 400Gbps.
    //
    // NumberOfConnections is a required field
    NumberOfConnections *int64 `locationName:"numberOfConnections" type:"integer" required:"true"`

    // The name of the service provider associated with the LAG.
    ProviderName *string `locationName:"providerName" type:"string"`

    // Indicates whether the connection will support MAC Security (MACsec).
    //
    // All connections in the LAG must be capable of supporting MAC Security (MACsec).
    // For information about MAC Security (MACsec) prerequisties, see MACsec prerequisties
    // (https://docs.aws.amazon.com/directconnect/latest/UserGuide/direct-connect-mac-sec-getting-started.html#mac-sec-prerequisites)
    // in the Direct Connect User Guide.
    RequestMACSec *bool `locationName:"requestMACSec" type:"boolean"`

    // The tags to associate with the LAG.
    Tags []*Tag `locationName:"tags" min:"1" type:"list"`
    // contains filtered or unexported fields
}

func (CreateLagInput) GoString ¶

func (s CreateLagInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateLagInput) SetChildConnectionTags ¶

func (s *CreateLagInput) SetChildConnectionTags(v []*Tag) *CreateLagInput

SetChildConnectionTags sets the ChildConnectionTags field's value.

func (*CreateLagInput) SetConnectionId ¶

func (s *CreateLagInput) SetConnectionId(v string) *CreateLagInput

SetConnectionId sets the ConnectionId field's value.

func (*CreateLagInput) SetConnectionsBandwidth ¶

func (s *CreateLagInput) SetConnectionsBandwidth(v string) *CreateLagInput

SetConnectionsBandwidth sets the ConnectionsBandwidth field's value.

func (*CreateLagInput) SetLagName ¶

func (s *CreateLagInput) SetLagName(v string) *CreateLagInput

SetLagName sets the LagName field's value.

func (*CreateLagInput) SetLocation ¶

func (s *CreateLagInput) SetLocation(v string) *CreateLagInput

SetLocation sets the Location field's value.

func (*CreateLagInput) SetNumberOfConnections ¶

func (s *CreateLagInput) SetNumberOfConnections(v int64) *CreateLagInput

SetNumberOfConnections sets the NumberOfConnections field's value.

func (*CreateLagInput) SetProviderName ¶

func (s *CreateLagInput) SetProviderName(v string) *CreateLagInput

SetProviderName sets the ProviderName field's value.

func (*CreateLagInput) SetRequestMACSec ¶

func (s *CreateLagInput) SetRequestMACSec(v bool) *CreateLagInput

SetRequestMACSec sets the RequestMACSec field's value.

func (*CreateLagInput) SetTags ¶

func (s *CreateLagInput) SetTags(v []*Tag) *CreateLagInput

SetTags sets the Tags field's value.

func (CreateLagInput) String ¶

func (s CreateLagInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateLagInput) Validate ¶

func (s *CreateLagInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreatePrivateVirtualInterfaceInput ¶

type CreatePrivateVirtualInterfaceInput struct {

    // The ID of the connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // Information about the private virtual interface.
    //
    // NewPrivateVirtualInterface is a required field
    NewPrivateVirtualInterface *NewPrivateVirtualInterface `locationName:"newPrivateVirtualInterface" type:"structure" required:"true"`
    // contains filtered or unexported fields
}

func (CreatePrivateVirtualInterfaceInput) GoString ¶

func (s CreatePrivateVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreatePrivateVirtualInterfaceInput) SetConnectionId ¶

func (s *CreatePrivateVirtualInterfaceInput) SetConnectionId(v string) *CreatePrivateVirtualInterfaceInput

SetConnectionId sets the ConnectionId field's value.

func (*CreatePrivateVirtualInterfaceInput) SetNewPrivateVirtualInterface ¶

func (s *CreatePrivateVirtualInterfaceInput) SetNewPrivateVirtualInterface(v *NewPrivateVirtualInterface) *CreatePrivateVirtualInterfaceInput

SetNewPrivateVirtualInterface sets the NewPrivateVirtualInterface field's value.

func (CreatePrivateVirtualInterfaceInput) String ¶

func (s CreatePrivateVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreatePrivateVirtualInterfaceInput) Validate ¶

func (s *CreatePrivateVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreatePublicVirtualInterfaceInput ¶

type CreatePublicVirtualInterfaceInput struct {

    // The ID of the connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // Information about the public virtual interface.
    //
    // NewPublicVirtualInterface is a required field
    NewPublicVirtualInterface *NewPublicVirtualInterface `locationName:"newPublicVirtualInterface" type:"structure" required:"true"`
    // contains filtered or unexported fields
}

func (CreatePublicVirtualInterfaceInput) GoString ¶

func (s CreatePublicVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreatePublicVirtualInterfaceInput) SetConnectionId ¶

func (s *CreatePublicVirtualInterfaceInput) SetConnectionId(v string) *CreatePublicVirtualInterfaceInput

SetConnectionId sets the ConnectionId field's value.

func (*CreatePublicVirtualInterfaceInput) SetNewPublicVirtualInterface ¶

func (s *CreatePublicVirtualInterfaceInput) SetNewPublicVirtualInterface(v *NewPublicVirtualInterface) *CreatePublicVirtualInterfaceInput

SetNewPublicVirtualInterface sets the NewPublicVirtualInterface field's value.

func (CreatePublicVirtualInterfaceInput) String ¶

func (s CreatePublicVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreatePublicVirtualInterfaceInput) Validate ¶

func (s *CreatePublicVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTransitVirtualInterfaceInput ¶

type CreateTransitVirtualInterfaceInput struct {

    // The ID of the connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // Information about the transit virtual interface.
    //
    // NewTransitVirtualInterface is a required field
    NewTransitVirtualInterface *NewTransitVirtualInterface `locationName:"newTransitVirtualInterface" type:"structure" required:"true"`
    // contains filtered or unexported fields
}

func (CreateTransitVirtualInterfaceInput) GoString ¶

func (s CreateTransitVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateTransitVirtualInterfaceInput) SetConnectionId ¶

func (s *CreateTransitVirtualInterfaceInput) SetConnectionId(v string) *CreateTransitVirtualInterfaceInput

SetConnectionId sets the ConnectionId field's value.

func (*CreateTransitVirtualInterfaceInput) SetNewTransitVirtualInterface ¶

func (s *CreateTransitVirtualInterfaceInput) SetNewTransitVirtualInterface(v *NewTransitVirtualInterface) *CreateTransitVirtualInterfaceInput

SetNewTransitVirtualInterface sets the NewTransitVirtualInterface field's value.

func (CreateTransitVirtualInterfaceInput) String ¶

func (s CreateTransitVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateTransitVirtualInterfaceInput) Validate ¶

func (s *CreateTransitVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTransitVirtualInterfaceOutput ¶

type CreateTransitVirtualInterfaceOutput struct {

    // Information about a virtual interface.
    VirtualInterface *VirtualInterface `locationName:"virtualInterface" type:"structure"`
    // contains filtered or unexported fields
}

func (CreateTransitVirtualInterfaceOutput) GoString ¶

func (s CreateTransitVirtualInterfaceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateTransitVirtualInterfaceOutput) SetVirtualInterface ¶

func (s *CreateTransitVirtualInterfaceOutput) SetVirtualInterface(v *VirtualInterface) *CreateTransitVirtualInterfaceOutput

SetVirtualInterface sets the VirtualInterface field's value.

func (CreateTransitVirtualInterfaceOutput) String ¶

func (s CreateTransitVirtualInterfaceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type CustomerAgreement ¶

type CustomerAgreement struct {

    // The name of the agreement.
    AgreementName *string `locationName:"agreementName" type:"string"`

    // The status of the customer agreement. This will be either signed or unsigned
    Status *string `locationName:"status" type:"string"`
    // contains filtered or unexported fields
}

The name and status of a customer agreement.

func (CustomerAgreement) GoString ¶

func (s CustomerAgreement) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CustomerAgreement) SetAgreementName ¶

func (s *CustomerAgreement) SetAgreementName(v string) *CustomerAgreement

SetAgreementName sets the AgreementName field's value.

func (*CustomerAgreement) SetStatus ¶

func (s *CustomerAgreement) SetStatus(v string) *CustomerAgreement

SetStatus sets the Status field's value.

func (CustomerAgreement) String ¶

func (s CustomerAgreement) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteBGPPeerInput ¶

type DeleteBGPPeerInput struct {

    // The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
    Asn *int64 `locationName:"asn" type:"integer"`

    // The ID of the BGP peer.
    BgpPeerId *string `locationName:"bgpPeerId" type:"string"`

    // The IP address assigned to the customer interface.
    CustomerAddress *string `locationName:"customerAddress" type:"string"`

    // The ID of the virtual interface.
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`
    // contains filtered or unexported fields
}

func (DeleteBGPPeerInput) GoString ¶

func (s DeleteBGPPeerInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteBGPPeerInput) SetAsn ¶

func (s *DeleteBGPPeerInput) SetAsn(v int64) *DeleteBGPPeerInput

SetAsn sets the Asn field's value.

func (*DeleteBGPPeerInput) SetBgpPeerId ¶

func (s *DeleteBGPPeerInput) SetBgpPeerId(v string) *DeleteBGPPeerInput

SetBgpPeerId sets the BgpPeerId field's value.

func (*DeleteBGPPeerInput) SetCustomerAddress ¶

func (s *DeleteBGPPeerInput) SetCustomerAddress(v string) *DeleteBGPPeerInput

SetCustomerAddress sets the CustomerAddress field's value.

func (*DeleteBGPPeerInput) SetVirtualInterfaceId ¶

func (s *DeleteBGPPeerInput) SetVirtualInterfaceId(v string) *DeleteBGPPeerInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DeleteBGPPeerInput) String ¶

func (s DeleteBGPPeerInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteBGPPeerOutput ¶

type DeleteBGPPeerOutput struct {

    // The virtual interface.
    VirtualInterface *VirtualInterface `locationName:"virtualInterface" type:"structure"`
    // contains filtered or unexported fields
}

func (DeleteBGPPeerOutput) GoString ¶

func (s DeleteBGPPeerOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteBGPPeerOutput) SetVirtualInterface ¶

func (s *DeleteBGPPeerOutput) SetVirtualInterface(v *VirtualInterface) *DeleteBGPPeerOutput

SetVirtualInterface sets the VirtualInterface field's value.

func (DeleteBGPPeerOutput) String ¶

func (s DeleteBGPPeerOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteConnectionInput ¶

type DeleteConnectionInput struct {

    // The ID of the connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteConnectionInput) GoString ¶

func (s DeleteConnectionInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteConnectionInput) SetConnectionId ¶

func (s *DeleteConnectionInput) SetConnectionId(v string) *DeleteConnectionInput

SetConnectionId sets the ConnectionId field's value.

func (DeleteConnectionInput) String ¶

func (s DeleteConnectionInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteConnectionInput) Validate ¶

func (s *DeleteConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteDirectConnectGatewayAssociationInput ¶

type DeleteDirectConnectGatewayAssociationInput struct {

    // The ID of the Direct Connect gateway association.
    AssociationId *string `locationName:"associationId" type:"string"`

    // The ID of the Direct Connect gateway.
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string"`

    // The ID of the virtual private gateway.
    VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string"`
    // contains filtered or unexported fields
}

func (DeleteDirectConnectGatewayAssociationInput) GoString ¶

func (s DeleteDirectConnectGatewayAssociationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayAssociationInput) SetAssociationId ¶

func (s *DeleteDirectConnectGatewayAssociationInput) SetAssociationId(v string) *DeleteDirectConnectGatewayAssociationInput

SetAssociationId sets the AssociationId field's value.

func (*DeleteDirectConnectGatewayAssociationInput) SetDirectConnectGatewayId ¶

func (s *DeleteDirectConnectGatewayAssociationInput) SetDirectConnectGatewayId(v string) *DeleteDirectConnectGatewayAssociationInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*DeleteDirectConnectGatewayAssociationInput) SetVirtualGatewayId ¶

func (s *DeleteDirectConnectGatewayAssociationInput) SetVirtualGatewayId(v string) *DeleteDirectConnectGatewayAssociationInput

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (DeleteDirectConnectGatewayAssociationInput) String ¶

func (s DeleteDirectConnectGatewayAssociationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteDirectConnectGatewayAssociationOutput ¶

type DeleteDirectConnectGatewayAssociationOutput struct {

    // Information about the deleted association.
    DirectConnectGatewayAssociation *GatewayAssociation `locationName:"directConnectGatewayAssociation" type:"structure"`
    // contains filtered or unexported fields
}

func (DeleteDirectConnectGatewayAssociationOutput) GoString ¶

func (s DeleteDirectConnectGatewayAssociationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayAssociationOutput) SetDirectConnectGatewayAssociation ¶

func (s *DeleteDirectConnectGatewayAssociationOutput) SetDirectConnectGatewayAssociation(v *GatewayAssociation) *DeleteDirectConnectGatewayAssociationOutput

SetDirectConnectGatewayAssociation sets the DirectConnectGatewayAssociation field's value.

func (DeleteDirectConnectGatewayAssociationOutput) String ¶

func (s DeleteDirectConnectGatewayAssociationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteDirectConnectGatewayAssociationProposalInput ¶

type DeleteDirectConnectGatewayAssociationProposalInput struct {

    // The ID of the proposal.
    //
    // ProposalId is a required field
    ProposalId *string `locationName:"proposalId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteDirectConnectGatewayAssociationProposalInput) GoString ¶

func (s DeleteDirectConnectGatewayAssociationProposalInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayAssociationProposalInput) SetProposalId ¶

func (s *DeleteDirectConnectGatewayAssociationProposalInput) SetProposalId(v string) *DeleteDirectConnectGatewayAssociationProposalInput

SetProposalId sets the ProposalId field's value.

func (DeleteDirectConnectGatewayAssociationProposalInput) String ¶

func (s DeleteDirectConnectGatewayAssociationProposalInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayAssociationProposalInput) Validate ¶

func (s *DeleteDirectConnectGatewayAssociationProposalInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteDirectConnectGatewayAssociationProposalOutput ¶

type DeleteDirectConnectGatewayAssociationProposalOutput struct {

    // The ID of the associated gateway.
    DirectConnectGatewayAssociationProposal *GatewayAssociationProposal `locationName:"directConnectGatewayAssociationProposal" type:"structure"`
    // contains filtered or unexported fields
}

func (DeleteDirectConnectGatewayAssociationProposalOutput) GoString ¶

func (s DeleteDirectConnectGatewayAssociationProposalOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayAssociationProposalOutput) SetDirectConnectGatewayAssociationProposal ¶

func (s *DeleteDirectConnectGatewayAssociationProposalOutput) SetDirectConnectGatewayAssociationProposal(v *GatewayAssociationProposal) *DeleteDirectConnectGatewayAssociationProposalOutput

SetDirectConnectGatewayAssociationProposal sets the DirectConnectGatewayAssociationProposal field's value.

func (DeleteDirectConnectGatewayAssociationProposalOutput) String ¶

func (s DeleteDirectConnectGatewayAssociationProposalOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteDirectConnectGatewayInput ¶

type DeleteDirectConnectGatewayInput struct {

    // The ID of the Direct Connect gateway.
    //
    // DirectConnectGatewayId is a required field
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteDirectConnectGatewayInput) GoString ¶

func (s DeleteDirectConnectGatewayInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayInput) SetDirectConnectGatewayId ¶

func (s *DeleteDirectConnectGatewayInput) SetDirectConnectGatewayId(v string) *DeleteDirectConnectGatewayInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (DeleteDirectConnectGatewayInput) String ¶

func (s DeleteDirectConnectGatewayInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayInput) Validate ¶

func (s *DeleteDirectConnectGatewayInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteDirectConnectGatewayOutput ¶

type DeleteDirectConnectGatewayOutput struct {

    // The Direct Connect gateway.
    DirectConnectGateway *Gateway `locationName:"directConnectGateway" type:"structure"`
    // contains filtered or unexported fields
}

func (DeleteDirectConnectGatewayOutput) GoString ¶

func (s DeleteDirectConnectGatewayOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDirectConnectGatewayOutput) SetDirectConnectGateway ¶

func (s *DeleteDirectConnectGatewayOutput) SetDirectConnectGateway(v *Gateway) *DeleteDirectConnectGatewayOutput

SetDirectConnectGateway sets the DirectConnectGateway field's value.

func (DeleteDirectConnectGatewayOutput) String ¶

func (s DeleteDirectConnectGatewayOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteInterconnectInput ¶

type DeleteInterconnectInput struct {

    // The ID of the interconnect.
    //
    // InterconnectId is a required field
    InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteInterconnectInput) GoString ¶

func (s DeleteInterconnectInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteInterconnectInput) SetInterconnectId ¶

func (s *DeleteInterconnectInput) SetInterconnectId(v string) *DeleteInterconnectInput

SetInterconnectId sets the InterconnectId field's value.

func (DeleteInterconnectInput) String ¶

func (s DeleteInterconnectInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteInterconnectInput) Validate ¶

func (s *DeleteInterconnectInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteInterconnectOutput ¶

type DeleteInterconnectOutput struct {

    // The state of the interconnect. The following are the possible values:
    //
    //    * requested: The initial state of an interconnect. The interconnect stays
    //    in the requested state until the Letter of Authorization (LOA) is sent
    //    to the customer.
    //
    //    * pending: The interconnect is approved, and is being initialized.
    //
    //    * available: The network link is up, and the interconnect is ready for
    //    use.
    //
    //    * down: The network link is down.
    //
    //    * deleting: The interconnect is being deleted.
    //
    //    * deleted: The interconnect is deleted.
    //
    //    * unknown: The state of the interconnect is not available.
    InterconnectState *string `locationName:"interconnectState" type:"string" enum:"InterconnectState"`
    // contains filtered or unexported fields
}

func (DeleteInterconnectOutput) GoString ¶

func (s DeleteInterconnectOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteInterconnectOutput) SetInterconnectState ¶

func (s *DeleteInterconnectOutput) SetInterconnectState(v string) *DeleteInterconnectOutput

SetInterconnectState sets the InterconnectState field's value.

func (DeleteInterconnectOutput) String ¶

func (s DeleteInterconnectOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DeleteLagInput ¶

type DeleteLagInput struct {

    // The ID of the LAG.
    //
    // LagId is a required field
    LagId *string `locationName:"lagId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteLagInput) GoString ¶

func (s DeleteLagInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteLagInput) SetLagId ¶

func (s *DeleteLagInput) SetLagId(v string) *DeleteLagInput

SetLagId sets the LagId field's value.

func (DeleteLagInput) String ¶

func (s DeleteLagInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteLagInput) Validate ¶

func (s *DeleteLagInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVirtualInterfaceInput ¶

type DeleteVirtualInterfaceInput struct {

    // The ID of the virtual interface.
    //
    // VirtualInterfaceId is a required field
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteVirtualInterfaceInput) GoString ¶

func (s DeleteVirtualInterfaceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteVirtualInterfaceInput) SetVirtualInterfaceId ¶

func (s *DeleteVirtualInterfaceInput) SetVirtualInterfaceId(v string) *DeleteVirtualInterfaceInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DeleteVirtualInterfaceInput) String ¶

func (s DeleteVirtualInterfaceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteVirtualInterfaceInput) Validate ¶

func (s *DeleteVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVirtualInterfaceOutput ¶

type DeleteVirtualInterfaceOutput struct {

    // The state of the virtual interface. The following are the possible values:
    //
    //    * confirming: The creation of the virtual interface is pending confirmation
    //    from the virtual interface owner. If the owner of the virtual interface
    //    is different from the owner of the connection on which it is provisioned,
    //    then the virtual interface will remain in this state until it is confirmed
    //    by the virtual interface owner.
    //
    //    * verifying: This state only applies to public virtual interfaces. Each
    //    public virtual interface needs validation before the virtual interface
    //    can be created.
    //
    //    * pending: A virtual interface is in this state from the time that it
    //    is created until the virtual interface is ready to forward traffic.
    //
    //    * available: A virtual interface that is able to forward traffic.
    //
    //    * down: A virtual interface that is BGP down.
    //
    //    * deleting: A virtual interface is in this state immediately after calling
    //    DeleteVirtualInterface until it can no longer forward traffic.
    //
    //    * deleted: A virtual interface that cannot forward traffic.
    //
    //    * rejected: The virtual interface owner has declined creation of the virtual
    //    interface. If a virtual interface in the Confirming state is deleted by
    //    the virtual interface owner, the virtual interface enters the Rejected
    //    state.
    //
    //    * unknown: The state of the virtual interface is not available.
    VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`
    // contains filtered or unexported fields
}

func (DeleteVirtualInterfaceOutput) GoString ¶

func (s DeleteVirtualInterfaceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteVirtualInterfaceOutput) SetVirtualInterfaceState ¶

func (s *DeleteVirtualInterfaceOutput) SetVirtualInterfaceState(v string) *DeleteVirtualInterfaceOutput

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (DeleteVirtualInterfaceOutput) String ¶

func (s DeleteVirtualInterfaceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeConnectionLoaInput ¶

type DescribeConnectionLoaInput struct {

    // The ID of the connection.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // The standard media type for the LOA-CFA document. The only supported value
    // is application/pdf.
    LoaContentType *string `locationName:"loaContentType" type:"string" enum:"LoaContentType"`

    // The name of the APN partner or service provider who establishes connectivity
    // on your behalf. If you specify this parameter, the LOA-CFA lists the provider
    // name alongside your company name as the requester of the cross connect.
    ProviderName *string `locationName:"providerName" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeConnectionLoaInput) GoString ¶

func (s DescribeConnectionLoaInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeConnectionLoaInput) SetConnectionId ¶

func (s *DescribeConnectionLoaInput) SetConnectionId(v string) *DescribeConnectionLoaInput

SetConnectionId sets the ConnectionId field's value.

func (*DescribeConnectionLoaInput) SetLoaContentType ¶

func (s *DescribeConnectionLoaInput) SetLoaContentType(v string) *DescribeConnectionLoaInput

SetLoaContentType sets the LoaContentType field's value.

func (*DescribeConnectionLoaInput) SetProviderName ¶

func (s *DescribeConnectionLoaInput) SetProviderName(v string) *DescribeConnectionLoaInput

SetProviderName sets the ProviderName field's value.

func (DescribeConnectionLoaInput) String ¶

func (s DescribeConnectionLoaInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeConnectionLoaInput) Validate ¶

func (s *DescribeConnectionLoaInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeConnectionLoaOutput ¶

type DescribeConnectionLoaOutput struct {

    // The Letter of Authorization - Connecting Facility Assignment (LOA-CFA).
    Loa *Loa `locationName:"loa" type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeConnectionLoaOutput) GoString ¶

func (s DescribeConnectionLoaOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeConnectionLoaOutput) SetLoa ¶

func (s *DescribeConnectionLoaOutput) SetLoa(v *Loa) *DescribeConnectionLoaOutput

SetLoa sets the Loa field's value.

func (DescribeConnectionLoaOutput) String ¶

func (s DescribeConnectionLoaOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeConnectionsInput ¶

type DescribeConnectionsInput struct {

    // The ID of the connection.
    ConnectionId *string `locationName:"connectionId" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeConnectionsInput) GoString ¶

func (s DescribeConnectionsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeConnectionsInput) SetConnectionId ¶

func (s *DescribeConnectionsInput) SetConnectionId(v string) *DescribeConnectionsInput

SetConnectionId sets the ConnectionId field's value.

func (DescribeConnectionsInput) String ¶

func (s DescribeConnectionsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeConnectionsOnInterconnectInput ¶

type DescribeConnectionsOnInterconnectInput struct {

    // The ID of the interconnect.
    //
    // InterconnectId is a required field
    InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeConnectionsOnInterconnectInput) GoString ¶

func (s DescribeConnectionsOnInterconnectInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeConnectionsOnInterconnectInput) SetInterconnectId ¶

func (s *DescribeConnectionsOnInterconnectInput) SetInterconnectId(v string) *DescribeConnectionsOnInterconnectInput

SetInterconnectId sets the InterconnectId field's value.

func (DescribeConnectionsOnInterconnectInput) String ¶

func (s DescribeConnectionsOnInterconnectInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeConnectionsOnInterconnectInput) Validate ¶

func (s *DescribeConnectionsOnInterconnectInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeCustomerMetadataInput ¶

type DescribeCustomerMetadataInput struct {
    // contains filtered or unexported fields
}

func (DescribeCustomerMetadataInput) GoString ¶

func (s DescribeCustomerMetadataInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DescribeCustomerMetadataInput) String ¶

func (s DescribeCustomerMetadataInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeCustomerMetadataOutput ¶

type DescribeCustomerMetadataOutput struct {

    // The list of customer agreements.
    Agreements []*CustomerAgreement `locationName:"agreements" type:"list"`

    // The type of network-to-network interface (NNI) partner. The partner type
    // will be one of the following:
    //
    //    * V1: This partner can only allocate 50Mbps, 100Mbps, 200Mbps, 300Mbps,
    //    400Mbps, or 500Mbps subgigabit connections.
    //
    //    * V2: This partner can only allocate 1GB, 2GB, 5GB, or 10GB hosted connections.
    //
    //    * nonPartner: The customer is not a partner.
    NniPartnerType *string `locationName:"nniPartnerType" type:"string" enum:"NniPartnerType"`
    // contains filtered or unexported fields
}

func (DescribeCustomerMetadataOutput) GoString ¶

func (s DescribeCustomerMetadataOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeCustomerMetadataOutput) SetAgreements ¶

func (s *DescribeCustomerMetadataOutput) SetAgreements(v []*CustomerAgreement) *DescribeCustomerMetadataOutput

SetAgreements sets the Agreements field's value.

func (*DescribeCustomerMetadataOutput) SetNniPartnerType ¶

func (s *DescribeCustomerMetadataOutput) SetNniPartnerType(v string) *DescribeCustomerMetadataOutput

SetNniPartnerType sets the NniPartnerType field's value.

func (DescribeCustomerMetadataOutput) String ¶

func (s DescribeCustomerMetadataOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewayAssociationProposalsInput ¶

type DescribeDirectConnectGatewayAssociationProposalsInput struct {

    // The ID of the associated gateway.
    AssociatedGatewayId *string `locationName:"associatedGatewayId" type:"string"`

    // The ID of the Direct Connect gateway.
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string"`

    // The maximum number of results to return with a single call. To retrieve the
    // remaining results, make another call with the returned nextToken value.
    //
    // If MaxResults is given a value larger than 100, only 100 results are returned.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The token for the next page of results.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The ID of the proposal.
    ProposalId *string `locationName:"proposalId" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewayAssociationProposalsInput) GoString ¶

func (s DescribeDirectConnectGatewayAssociationProposalsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewayAssociationProposalsInput) SetAssociatedGatewayId ¶

func (s *DescribeDirectConnectGatewayAssociationProposalsInput) SetAssociatedGatewayId(v string) *DescribeDirectConnectGatewayAssociationProposalsInput

SetAssociatedGatewayId sets the AssociatedGatewayId field's value.

func (*DescribeDirectConnectGatewayAssociationProposalsInput) SetDirectConnectGatewayId ¶

func (s *DescribeDirectConnectGatewayAssociationProposalsInput) SetDirectConnectGatewayId(v string) *DescribeDirectConnectGatewayAssociationProposalsInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*DescribeDirectConnectGatewayAssociationProposalsInput) SetMaxResults ¶

func (s *DescribeDirectConnectGatewayAssociationProposalsInput) SetMaxResults(v int64) *DescribeDirectConnectGatewayAssociationProposalsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeDirectConnectGatewayAssociationProposalsInput) SetNextToken ¶

func (s *DescribeDirectConnectGatewayAssociationProposalsInput) SetNextToken(v string) *DescribeDirectConnectGatewayAssociationProposalsInput

SetNextToken sets the NextToken field's value.

func (*DescribeDirectConnectGatewayAssociationProposalsInput) SetProposalId ¶

func (s *DescribeDirectConnectGatewayAssociationProposalsInput) SetProposalId(v string) *DescribeDirectConnectGatewayAssociationProposalsInput

SetProposalId sets the ProposalId field's value.

func (DescribeDirectConnectGatewayAssociationProposalsInput) String ¶

func (s DescribeDirectConnectGatewayAssociationProposalsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewayAssociationProposalsOutput ¶

type DescribeDirectConnectGatewayAssociationProposalsOutput struct {

    // Describes the Direct Connect gateway association proposals.
    DirectConnectGatewayAssociationProposals []*GatewayAssociationProposal `locationName:"directConnectGatewayAssociationProposals" type:"list"`

    // The token to use to retrieve the next page of results. This value is null
    // when there are no more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewayAssociationProposalsOutput) GoString ¶

func (s DescribeDirectConnectGatewayAssociationProposalsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewayAssociationProposalsOutput) SetDirectConnectGatewayAssociationProposals ¶

func (s *DescribeDirectConnectGatewayAssociationProposalsOutput) SetDirectConnectGatewayAssociationProposals(v []*GatewayAssociationProposal) *DescribeDirectConnectGatewayAssociationProposalsOutput

SetDirectConnectGatewayAssociationProposals sets the DirectConnectGatewayAssociationProposals field's value.

func (*DescribeDirectConnectGatewayAssociationProposalsOutput) SetNextToken ¶

func (s *DescribeDirectConnectGatewayAssociationProposalsOutput) SetNextToken(v string) *DescribeDirectConnectGatewayAssociationProposalsOutput

SetNextToken sets the NextToken field's value.

func (DescribeDirectConnectGatewayAssociationProposalsOutput) String ¶

func (s DescribeDirectConnectGatewayAssociationProposalsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewayAssociationsInput ¶

type DescribeDirectConnectGatewayAssociationsInput struct {

    // The ID of the associated gateway.
    AssociatedGatewayId *string `locationName:"associatedGatewayId" type:"string"`

    // The ID of the Direct Connect gateway association.
    AssociationId *string `locationName:"associationId" type:"string"`

    // The ID of the Direct Connect gateway.
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string"`

    // The maximum number of results to return with a single call. To retrieve the
    // remaining results, make another call with the returned nextToken value.
    //
    // If MaxResults is given a value larger than 100, only 100 results are returned.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The token provided in the previous call to retrieve the next page.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The ID of the virtual private gateway or transit gateway.
    VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewayAssociationsInput) GoString ¶

func (s DescribeDirectConnectGatewayAssociationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewayAssociationsInput) SetAssociatedGatewayId ¶

func (s *DescribeDirectConnectGatewayAssociationsInput) SetAssociatedGatewayId(v string) *DescribeDirectConnectGatewayAssociationsInput

SetAssociatedGatewayId sets the AssociatedGatewayId field's value.

func (*DescribeDirectConnectGatewayAssociationsInput) SetAssociationId ¶

func (s *DescribeDirectConnectGatewayAssociationsInput) SetAssociationId(v string) *DescribeDirectConnectGatewayAssociationsInput

SetAssociationId sets the AssociationId field's value.

func (*DescribeDirectConnectGatewayAssociationsInput) SetDirectConnectGatewayId ¶

func (s *DescribeDirectConnectGatewayAssociationsInput) SetDirectConnectGatewayId(v string) *DescribeDirectConnectGatewayAssociationsInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*DescribeDirectConnectGatewayAssociationsInput) SetMaxResults ¶

func (s *DescribeDirectConnectGatewayAssociationsInput) SetMaxResults(v int64) *DescribeDirectConnectGatewayAssociationsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeDirectConnectGatewayAssociationsInput) SetNextToken ¶

func (s *DescribeDirectConnectGatewayAssociationsInput) SetNextToken(v string) *DescribeDirectConnectGatewayAssociationsInput

SetNextToken sets the NextToken field's value.

func (*DescribeDirectConnectGatewayAssociationsInput) SetVirtualGatewayId ¶

func (s *DescribeDirectConnectGatewayAssociationsInput) SetVirtualGatewayId(v string) *DescribeDirectConnectGatewayAssociationsInput

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (DescribeDirectConnectGatewayAssociationsInput) String ¶

func (s DescribeDirectConnectGatewayAssociationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewayAssociationsOutput ¶

type DescribeDirectConnectGatewayAssociationsOutput struct {

    // Information about the associations.
    DirectConnectGatewayAssociations []*GatewayAssociation `locationName:"directConnectGatewayAssociations" type:"list"`

    // The token to retrieve the next page.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewayAssociationsOutput) GoString ¶

func (s DescribeDirectConnectGatewayAssociationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewayAssociationsOutput) SetDirectConnectGatewayAssociations ¶

func (s *DescribeDirectConnectGatewayAssociationsOutput) SetDirectConnectGatewayAssociations(v []*GatewayAssociation) *DescribeDirectConnectGatewayAssociationsOutput

SetDirectConnectGatewayAssociations sets the DirectConnectGatewayAssociations field's value.

func (*DescribeDirectConnectGatewayAssociationsOutput) SetNextToken ¶

func (s *DescribeDirectConnectGatewayAssociationsOutput) SetNextToken(v string) *DescribeDirectConnectGatewayAssociationsOutput

SetNextToken sets the NextToken field's value.

func (DescribeDirectConnectGatewayAssociationsOutput) String ¶

func (s DescribeDirectConnectGatewayAssociationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewayAttachmentsInput ¶

type DescribeDirectConnectGatewayAttachmentsInput struct {

    // The ID of the Direct Connect gateway.
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string"`

    // The maximum number of results to return with a single call. To retrieve the
    // remaining results, make another call with the returned nextToken value.
    //
    // If MaxResults is given a value larger than 100, only 100 results are returned.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The token provided in the previous call to retrieve the next page.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The ID of the virtual interface.
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewayAttachmentsInput) GoString ¶

func (s DescribeDirectConnectGatewayAttachmentsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewayAttachmentsInput) SetDirectConnectGatewayId ¶

func (s *DescribeDirectConnectGatewayAttachmentsInput) SetDirectConnectGatewayId(v string) *DescribeDirectConnectGatewayAttachmentsInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*DescribeDirectConnectGatewayAttachmentsInput) SetMaxResults ¶

func (s *DescribeDirectConnectGatewayAttachmentsInput) SetMaxResults(v int64) *DescribeDirectConnectGatewayAttachmentsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeDirectConnectGatewayAttachmentsInput) SetNextToken ¶

func (s *DescribeDirectConnectGatewayAttachmentsInput) SetNextToken(v string) *DescribeDirectConnectGatewayAttachmentsInput

SetNextToken sets the NextToken field's value.

func (*DescribeDirectConnectGatewayAttachmentsInput) SetVirtualInterfaceId ¶

func (s *DescribeDirectConnectGatewayAttachmentsInput) SetVirtualInterfaceId(v string) *DescribeDirectConnectGatewayAttachmentsInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DescribeDirectConnectGatewayAttachmentsInput) String ¶

func (s DescribeDirectConnectGatewayAttachmentsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewayAttachmentsOutput ¶

type DescribeDirectConnectGatewayAttachmentsOutput struct {

    // The attachments.
    DirectConnectGatewayAttachments []*GatewayAttachment `locationName:"directConnectGatewayAttachments" type:"list"`

    // The token to retrieve the next page.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewayAttachmentsOutput) GoString ¶

func (s DescribeDirectConnectGatewayAttachmentsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewayAttachmentsOutput) SetDirectConnectGatewayAttachments ¶

func (s *DescribeDirectConnectGatewayAttachmentsOutput) SetDirectConnectGatewayAttachments(v []*GatewayAttachment) *DescribeDirectConnectGatewayAttachmentsOutput

SetDirectConnectGatewayAttachments sets the DirectConnectGatewayAttachments field's value.

func (*DescribeDirectConnectGatewayAttachmentsOutput) SetNextToken ¶

func (s *DescribeDirectConnectGatewayAttachmentsOutput) SetNextToken(v string) *DescribeDirectConnectGatewayAttachmentsOutput

SetNextToken sets the NextToken field's value.

func (DescribeDirectConnectGatewayAttachmentsOutput) String ¶

func (s DescribeDirectConnectGatewayAttachmentsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewaysInput ¶

type DescribeDirectConnectGatewaysInput struct {

    // The ID of the Direct Connect gateway.
    DirectConnectGatewayId *string `locationName:"directConnectGatewayId" type:"string"`

    // The maximum number of results to return with a single call. To retrieve the
    // remaining results, make another call with the returned nextToken value.
    //
    // If MaxResults is given a value larger than 100, only 100 results are returned.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The token provided in the previous call to retrieve the next page.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewaysInput) GoString ¶

func (s DescribeDirectConnectGatewaysInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewaysInput) SetDirectConnectGatewayId ¶

func (s *DescribeDirectConnectGatewaysInput) SetDirectConnectGatewayId(v string) *DescribeDirectConnectGatewaysInput

SetDirectConnectGatewayId sets the DirectConnectGatewayId field's value.

func (*DescribeDirectConnectGatewaysInput) SetMaxResults ¶

func (s *DescribeDirectConnectGatewaysInput) SetMaxResults(v int64) *DescribeDirectConnectGatewaysInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeDirectConnectGatewaysInput) SetNextToken ¶

func (s *DescribeDirectConnectGatewaysInput) SetNextToken(v string) *DescribeDirectConnectGatewaysInput

SetNextToken sets the NextToken field's value.

func (DescribeDirectConnectGatewaysInput) String ¶

func (s DescribeDirectConnectGatewaysInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeDirectConnectGatewaysOutput ¶

type DescribeDirectConnectGatewaysOutput struct {

    // The Direct Connect gateways.
    DirectConnectGateways []*Gateway `locationName:"directConnectGateways" type:"list"`

    // The token to retrieve the next page.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeDirectConnectGatewaysOutput) GoString ¶

func (s DescribeDirectConnectGatewaysOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeDirectConnectGatewaysOutput) SetDirectConnectGateways ¶

func (s *DescribeDirectConnectGatewaysOutput) SetDirectConnectGateways(v []*Gateway) *DescribeDirectConnectGatewaysOutput

SetDirectConnectGateways sets the DirectConnectGateways field's value.

func (*DescribeDirectConnectGatewaysOutput) SetNextToken ¶

func (s *DescribeDirectConnectGatewaysOutput) SetNextToken(v string) *DescribeDirectConnectGatewaysOutput

SetNextToken sets the NextToken field's value.

func (DescribeDirectConnectGatewaysOutput) String ¶

func (s DescribeDirectConnectGatewaysOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeHostedConnectionsInput ¶

type DescribeHostedConnectionsInput struct {

    // The ID of the interconnect or LAG.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeHostedConnectionsInput) GoString ¶

func (s DescribeHostedConnectionsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeHostedConnectionsInput) SetConnectionId ¶

func (s *DescribeHostedConnectionsInput) SetConnectionId(v string) *DescribeHostedConnectionsInput

SetConnectionId sets the ConnectionId field's value.

func (DescribeHostedConnectionsInput) String ¶

func (s DescribeHostedConnectionsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeHostedConnectionsInput) Validate ¶

func (s *DescribeHostedConnectionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeInterconnectLoaInput ¶

type DescribeInterconnectLoaInput struct {

    // The ID of the interconnect.
    //
    // InterconnectId is a required field
    InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`

    // The standard media type for the LOA-CFA document. The only supported value
    // is application/pdf.
    LoaContentType *string `locationName:"loaContentType" type:"string" enum:"LoaContentType"`

    // The name of the service provider who establishes connectivity on your behalf.
    // If you supply this parameter, the LOA-CFA lists the provider name alongside
    // your company name as the requester of the cross connect.
    ProviderName *string `locationName:"providerName" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeInterconnectLoaInput) GoString ¶

func (s DescribeInterconnectLoaInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeInterconnectLoaInput) SetInterconnectId ¶

func (s *DescribeInterconnectLoaInput) SetInterconnectId(v string) *DescribeInterconnectLoaInput

SetInterconnectId sets the InterconnectId field's value.

func (*DescribeInterconnectLoaInput) SetLoaContentType ¶

func (s *DescribeInterconnectLoaInput) SetLoaContentType(v string) *DescribeInterconnectLoaInput

SetLoaContentType sets the LoaContentType field's value.

func (*DescribeInterconnectLoaInput) SetProviderName ¶

func (s *DescribeInterconnectLoaInput) SetProviderName(v string) *DescribeInterconnectLoaInput

SetProviderName sets the ProviderName field's value.

func (DescribeInterconnectLoaInput) String ¶

func (s DescribeInterconnectLoaInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeInterconnectLoaInput) Validate ¶

func (s *DescribeInterconnectLoaInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeInterconnectLoaOutput ¶

type DescribeInterconnectLoaOutput struct {

    // The Letter of Authorization - Connecting Facility Assignment (LOA-CFA).
    Loa *Loa `locationName:"loa" type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeInterconnectLoaOutput) GoString ¶

func (s DescribeInterconnectLoaOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeInterconnectLoaOutput) SetLoa ¶

func (s *DescribeInterconnectLoaOutput) SetLoa(v *Loa) *DescribeInterconnectLoaOutput

SetLoa sets the Loa field's value.

func (DescribeInterconnectLoaOutput) String ¶

func (s DescribeInterconnectLoaOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeInterconnectsInput ¶

type DescribeInterconnectsInput struct {

    // The ID of the interconnect.
    InterconnectId *string `locationName:"interconnectId" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeInterconnectsInput) GoString ¶

func (s DescribeInterconnectsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeInterconnectsInput) SetInterconnectId ¶

func (s *DescribeInterconnectsInput) SetInterconnectId(v string) *DescribeInterconnectsInput

SetInterconnectId sets the InterconnectId field's value.

func (DescribeInterconnectsInput) String ¶

func (s DescribeInterconnectsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeInterconnectsOutput ¶

type DescribeInterconnectsOutput struct {

    // The interconnects.
    Interconnects []*Interconnect `locationName:"interconnects" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeInterconnectsOutput) GoString ¶

func (s DescribeInterconnectsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeInterconnectsOutput) SetInterconnects ¶

func (s *DescribeInterconnectsOutput) SetInterconnects(v []*Interconnect) *DescribeInterconnectsOutput

SetInterconnects sets the Interconnects field's value.

func (DescribeInterconnectsOutput) String ¶

func (s DescribeInterconnectsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeLagsInput ¶

type DescribeLagsInput struct {

    // The ID of the LAG.
    LagId *string `locationName:"lagId" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeLagsInput) GoString ¶

func (s DescribeLagsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeLagsInput) SetLagId ¶

func (s *DescribeLagsInput) SetLagId(v string) *DescribeLagsInput

SetLagId sets the LagId field's value.

func (DescribeLagsInput) String ¶

func (s DescribeLagsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeLagsOutput ¶

type DescribeLagsOutput struct {

    // The LAGs.
    Lags []*Lag `locationName:"lags" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeLagsOutput) GoString ¶

func (s DescribeLagsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeLagsOutput) SetLags ¶

func (s *DescribeLagsOutput) SetLags(v []*Lag) *DescribeLagsOutput

SetLags sets the Lags field's value.

func (DescribeLagsOutput) String ¶

func (s DescribeLagsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeLoaInput ¶

type DescribeLoaInput struct {

    // The ID of a connection, LAG, or interconnect.
    //
    // ConnectionId is a required field
    ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

    // The standard media type for the LOA-CFA document. The only supported value
    // is application/pdf.
    LoaContentType *string `locationName:"loaContentType" type:"string" enum:"LoaContentType"`

    // The name of the service provider who establishes connectivity on your behalf.
    // If you specify this parameter, the LOA-CFA lists the provider name alongside
    // your company name as the requester of the cross connect.
    ProviderName *string `locationName:"providerName" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeLoaInput) GoString ¶

func (s DescribeLoaInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeLoaInput) SetConnectionId ¶

func (s *DescribeLoaInput) SetConnectionId(v string) *DescribeLoaInput

SetConnectionId sets the ConnectionId field's value.

func (*DescribeLoaInput) SetLoaContentType ¶

func (s *DescribeLoaInput) SetLoaContentType(v string) *DescribeLoaInput

SetLoaContentType sets the LoaContentType field's value.

func (*DescribeLoaInput) SetProviderName ¶

func (s *DescribeLoaInput) SetProviderName(v string) *DescribeLoaInput

SetProviderName sets the ProviderName field's value.

func (DescribeLoaInput) String ¶

func (s DescribeLoaInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeLoaInput) Validate ¶

func (s *DescribeLoaInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeLocationsInput ¶

type DescribeLocationsInput struct {
    // contains filtered or unexported fields
}

func (DescribeLocationsInput) GoString ¶

func (s DescribeLocationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DescribeLocationsInput) String ¶

func (s DescribeLocationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeLocationsOutput ¶

type DescribeLocationsOutput struct {

    // The locations.
    Locations []*Location `locationName:"locations" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeLocationsOutput) GoString ¶

func (s DescribeLocationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeLocationsOutput) SetLocations ¶

func (s *DescribeLocationsOutput) SetLocations(v []*Location) *DescribeLocationsOutput

SetLocations sets the Locations field's value.

func (DescribeLocationsOutput) String ¶

func (s DescribeLocationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeRouterConfigurationInput ¶

type DescribeRouterConfigurationInput struct {

    // Identifies the router by a combination of vendor, platform, and software
    // version. For example, CiscoSystemsInc-2900SeriesRouters-IOS124.
    RouterTypeIdentifier *string `locationName:"routerTypeIdentifier" type:"string"`

    // The ID of the virtual interface.
    //
    // VirtualInterfaceId is a required field
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

Provides the details about a virtual interface's router.

func (DescribeRouterConfigurationInput) GoString ¶

func (s DescribeRouterConfigurationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeRouterConfigurationInput) SetRouterTypeIdentifier ¶

func (s *DescribeRouterConfigurationInput) SetRouterTypeIdentifier(v string) *DescribeRouterConfigurationInput

SetRouterTypeIdentifier sets the RouterTypeIdentifier field's value.

func (*DescribeRouterConfigurationInput) SetVirtualInterfaceId ¶

func (s *DescribeRouterConfigurationInput) SetVirtualInterfaceId(v string) *DescribeRouterConfigurationInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DescribeRouterConfigurationInput) String ¶

func (s DescribeRouterConfigurationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeRouterConfigurationInput) Validate ¶

func (s *DescribeRouterConfigurationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeRouterConfigurationOutput ¶

type DescribeRouterConfigurationOutput struct {

    // The customer router configuration.
    CustomerRouterConfig *string `locationName:"customerRouterConfig" type:"string"`

    // The details about the router.
    Router *RouterType `locationName:"router" type:"structure"`

    // The ID assigned to the virtual interface.
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`

    // Provides the details about a virtual interface's router.
    VirtualInterfaceName *string `locationName:"virtualInterfaceName" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeRouterConfigurationOutput) GoString ¶

func (s DescribeRouterConfigurationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeRouterConfigurationOutput) SetCustomerRouterConfig ¶

func (s *DescribeRouterConfigurationOutput) SetCustomerRouterConfig(v string) *DescribeRouterConfigurationOutput

SetCustomerRouterConfig sets the CustomerRouterConfig field's value.

func (*DescribeRouterConfigurationOutput) SetRouter ¶

func (s *DescribeRouterConfigurationOutput) SetRouter(v *RouterType) *DescribeRouterConfigurationOutput

SetRouter sets the Router field's value.

func (*DescribeRouterConfigurationOutput) SetVirtualInterfaceId ¶

func (s *DescribeRouterConfigurationOutput) SetVirtualInterfaceId(v string) *DescribeRouterConfigurationOutput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (*DescribeRouterConfigurationOutput) SetVirtualInterfaceName ¶

func (s *DescribeRouterConfigurationOutput) SetVirtualInterfaceName(v string) *DescribeRouterConfigurationOutput

SetVirtualInterfaceName sets the VirtualInterfaceName field's value.

func (DescribeRouterConfigurationOutput) String ¶

func (s DescribeRouterConfigurationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeTagsInput ¶

type DescribeTagsInput struct {

    // The Amazon Resource Names (ARNs) of the resources.
    //
    // ResourceArns is a required field
    ResourceArns []*string `locationName:"resourceArns" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTagsInput) GoString ¶

func (s DescribeTagsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeTagsInput) SetResourceArns ¶

func (s *DescribeTagsInput) SetResourceArns(v []*string) *DescribeTagsInput

SetResourceArns sets the ResourceArns field's value.

func (DescribeTagsInput) String ¶

func (s DescribeTagsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeTagsInput) Validate ¶

func (s *DescribeTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTagsOutput ¶

type DescribeTagsOutput struct {

    // Information about the tags.
    ResourceTags []*ResourceTag `locationName:"resourceTags" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeTagsOutput) GoString ¶

func (s DescribeTagsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeTagsOutput) SetResourceTags ¶

func (s *DescribeTagsOutput) SetResourceTags(v []*ResourceTag) *DescribeTagsOutput

SetResourceTags sets the ResourceTags field's value.

func (DescribeTagsOutput) String ¶

func (s DescribeTagsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeVirtualGatewaysInput ¶

type DescribeVirtualGatewaysInput struct {
    // contains filtered or unexported fields
}

func (DescribeVirtualGatewaysInput) GoString ¶

func (s DescribeVirtualGatewaysInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DescribeVirtualGatewaysInput) String ¶

func (s DescribeVirtualGatewaysInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeVirtualGatewaysOutput ¶

type DescribeVirtualGatewaysOutput struct {

    // The virtual private gateways.
    VirtualGateways []*VirtualGateway `locationName:"virtualGateways" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeVirtualGatewaysOutput) GoString ¶

func (s DescribeVirtualGatewaysOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeVirtualGatewaysOutput) SetVirtualGateways ¶

func (s *DescribeVirtualGatewaysOutput) SetVirtualGateways(v []*VirtualGateway) *DescribeVirtualGatewaysOutput

SetVirtualGateways sets the VirtualGateways field's value.

func (DescribeVirtualGatewaysOutput) String ¶

func (s DescribeVirtualGatewaysOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeVirtualInterfacesInput ¶

type DescribeVirtualInterfacesInput struct {

    // The ID of the connection.
    ConnectionId *string `locationName:"connectionId" type:"string"`

    // The ID of the virtual interface.
    VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeVirtualInterfacesInput) GoString ¶

func (s DescribeVirtualInterfacesInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeVirtualInterfacesInput) SetConnectionId ¶

func (s *DescribeVirtualInterfacesInput) SetConnectionId(v string) *DescribeVirtualInterfacesInput

SetConnectionId sets the ConnectionId field's value.

func (*DescribeVirtualInterfacesInput) SetVirtualInterfaceId ¶

func (s *DescribeVirtualInterfacesInput) SetVirtualInterfaceId(v string) *DescribeVirtualInterfacesInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DescribeVirtualInterfacesInput) String ¶

func (s DescribeVirtualInterfacesInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DescribeVirtualInterfacesOutput ¶

type DescribeVirtualInterfacesOutput struct {

    // The virtual interfaces
    VirtualInterfaces []*VirtualInterface `locationName:"virtualInterfaces" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeVirtualInterfacesOutput) GoString ¶

func (s DescribeVirtualInterfacesOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DescribeVirtualInterfacesOutput) SetVirtualInterfaces ¶

func (s *DescribeVirtualInterfacesOutput) SetVirtualInterfaces(v []*VirtualInterface) *DescribeVirtualInterfacesOutput

SetVirtualInterfaces sets the VirtualInterfaces field's value.

func (DescribeVirtualInterfacesOutput) String ¶

func (s DescribeVirtualInterfacesOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

type DirectConnect ¶

type DirectConnect struct {
    *client.Client
}

DirectConnect provides the API operation methods for making requests to AWS Direct Connect. See this package's package overview docs for details on the service.

DirectConnect methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

func New ¶

func New(p client.ConfigProvider, cfgs ...*aws.Config) *DirectConnect

New creates a new instance of the DirectConnect client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

mySession := session.Must(session.NewSession())

// Create a DirectConnect client from just a session.
svc := directconnect.New(mySession)

// Create a DirectConnect client with additional configuration
svc := directconnect.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*DirectConnect) AcceptDirectConnectGatewayAssociationProposal ¶

func (c *DirectConnect) AcceptDirectConnectGatewayAssociationProposal(input *AcceptDirectConnectGatewayAssociationProposalInput) (*AcceptDirectConnectGatewayAssociationProposalOutput, error)

AcceptDirectConnectGatewayAssociationProposal API operation for AWS Direct Connect.

Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AcceptDirectConnectGatewayAssociationProposal for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AcceptDirectConnectGatewayAssociationProposal

func (*DirectConnect) AcceptDirectConnectGatewayAssociationProposalRequest ¶

func (c *DirectConnect) AcceptDirectConnectGatewayAssociationProposalRequest(input *AcceptDirectConnectGatewayAssociationProposalInput) (req *request.Request, output *AcceptDirectConnectGatewayAssociationProposalOutput)

AcceptDirectConnectGatewayAssociationProposalRequest generates a "aws/request.Request" representing the client's request for the AcceptDirectConnectGatewayAssociationProposal operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AcceptDirectConnectGatewayAssociationProposal for more information on using the AcceptDirectConnectGatewayAssociationProposal API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AcceptDirectConnectGatewayAssociationProposalRequest method.
req, resp := client.AcceptDirectConnectGatewayAssociationProposalRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AcceptDirectConnectGatewayAssociationProposal

func (*DirectConnect) AcceptDirectConnectGatewayAssociationProposalWithContext ¶

func (c *DirectConnect) AcceptDirectConnectGatewayAssociationProposalWithContext(ctx aws.Context, input *AcceptDirectConnectGatewayAssociationProposalInput, opts ...request.Option) (*AcceptDirectConnectGatewayAssociationProposalOutput, error)

AcceptDirectConnectGatewayAssociationProposalWithContext is the same as AcceptDirectConnectGatewayAssociationProposal with the addition of the ability to pass a context and additional request options.

See AcceptDirectConnectGatewayAssociationProposal for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AllocateConnectionOnInterconnect ¶

func (c *DirectConnect) AllocateConnectionOnInterconnect(input *AllocateConnectionOnInterconnectInput) (*Connection, error)

AllocateConnectionOnInterconnect API operation for AWS Direct Connect.

Deprecated. Use AllocateHostedConnection instead.

Creates a hosted connection on an interconnect.

Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the specified interconnect.

Intended for use by Direct Connect Partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocateConnectionOnInterconnect for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateConnectionOnInterconnect

Deprecated: AllocateConnectionOnInterconnect has been deprecated

func (*DirectConnect) AllocateConnectionOnInterconnectRequest ¶

func (c *DirectConnect) AllocateConnectionOnInterconnectRequest(input *AllocateConnectionOnInterconnectInput) (req *request.Request, output *Connection)

AllocateConnectionOnInterconnectRequest generates a "aws/request.Request" representing the client's request for the AllocateConnectionOnInterconnect operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AllocateConnectionOnInterconnect for more information on using the AllocateConnectionOnInterconnect API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AllocateConnectionOnInterconnectRequest method.
req, resp := client.AllocateConnectionOnInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateConnectionOnInterconnect

Deprecated: AllocateConnectionOnInterconnect has been deprecated

func (*DirectConnect) AllocateConnectionOnInterconnectWithContext ¶

func (c *DirectConnect) AllocateConnectionOnInterconnectWithContext(ctx aws.Context, input *AllocateConnectionOnInterconnectInput, opts ...request.Option) (*Connection, error)

AllocateConnectionOnInterconnectWithContext is the same as AllocateConnectionOnInterconnect with the addition of the ability to pass a context and additional request options.

See AllocateConnectionOnInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

Deprecated: AllocateConnectionOnInterconnectWithContext has been deprecated

func (*DirectConnect) AllocateHostedConnection ¶

func (c *DirectConnect) AllocateHostedConnection(input *AllocateHostedConnectionInput) (*Connection, error)

AllocateHostedConnection API operation for AWS Direct Connect.

Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.

Allocates a VLAN number and a specified amount of capacity (bandwidth) for use by a hosted connection on the specified interconnect or LAG of interconnects. Amazon Web Services polices the hosted connection for the specified capacity and the Direct Connect Partner must also police the hosted connection for the specified capacity.

Intended for use by Direct Connect Partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocateHostedConnection for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateHostedConnection

func (*DirectConnect) AllocateHostedConnectionRequest ¶

func (c *DirectConnect) AllocateHostedConnectionRequest(input *AllocateHostedConnectionInput) (req *request.Request, output *Connection)

AllocateHostedConnectionRequest generates a "aws/request.Request" representing the client's request for the AllocateHostedConnection operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AllocateHostedConnection for more information on using the AllocateHostedConnection API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AllocateHostedConnectionRequest method.
req, resp := client.AllocateHostedConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateHostedConnection

func (*DirectConnect) AllocateHostedConnectionWithContext ¶

func (c *DirectConnect) AllocateHostedConnectionWithContext(ctx aws.Context, input *AllocateHostedConnectionInput, opts ...request.Option) (*Connection, error)

AllocateHostedConnectionWithContext is the same as AllocateHostedConnection with the addition of the ability to pass a context and additional request options.

See AllocateHostedConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AllocatePrivateVirtualInterface ¶

func (c *DirectConnect) AllocatePrivateVirtualInterface(input *AllocatePrivateVirtualInterfaceInput) (*VirtualInterface, error)

AllocatePrivateVirtualInterface API operation for AWS Direct Connect.

Provisions a private virtual interface to be owned by the specified Amazon Web Services account.

Virtual interfaces created using this action must be confirmed by the owner using ConfirmPrivateVirtualInterface. Until then, the virtual interface is in the Confirming state and is not available to handle traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocatePrivateVirtualInterface for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePrivateVirtualInterface

func (*DirectConnect) AllocatePrivateVirtualInterfaceRequest ¶

func (c *DirectConnect) AllocatePrivateVirtualInterfaceRequest(input *AllocatePrivateVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

AllocatePrivateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the AllocatePrivateVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AllocatePrivateVirtualInterface for more information on using the AllocatePrivateVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AllocatePrivateVirtualInterfaceRequest method.
req, resp := client.AllocatePrivateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePrivateVirtualInterface

func (*DirectConnect) AllocatePrivateVirtualInterfaceWithContext ¶

func (c *DirectConnect) AllocatePrivateVirtualInterfaceWithContext(ctx aws.Context, input *AllocatePrivateVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

AllocatePrivateVirtualInterfaceWithContext is the same as AllocatePrivateVirtualInterface with the addition of the ability to pass a context and additional request options.

See AllocatePrivateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AllocatePublicVirtualInterface ¶

func (c *DirectConnect) AllocatePublicVirtualInterface(input *AllocatePublicVirtualInterfaceInput) (*VirtualInterface, error)

AllocatePublicVirtualInterface API operation for AWS Direct Connect.

Provisions a public virtual interface to be owned by the specified Amazon Web Services account.

The owner of a connection calls this function to provision a public virtual interface to be owned by the specified Amazon Web Services account.

Virtual interfaces created using this function must be confirmed by the owner using ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface is in the confirming state and is not available to handle traffic.

When creating an IPv6 public virtual interface, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocatePublicVirtualInterface for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePublicVirtualInterface

func (*DirectConnect) AllocatePublicVirtualInterfaceRequest ¶

func (c *DirectConnect) AllocatePublicVirtualInterfaceRequest(input *AllocatePublicVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

AllocatePublicVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the AllocatePublicVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AllocatePublicVirtualInterface for more information on using the AllocatePublicVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AllocatePublicVirtualInterfaceRequest method.
req, resp := client.AllocatePublicVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePublicVirtualInterface

func (*DirectConnect) AllocatePublicVirtualInterfaceWithContext ¶

func (c *DirectConnect) AllocatePublicVirtualInterfaceWithContext(ctx aws.Context, input *AllocatePublicVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

AllocatePublicVirtualInterfaceWithContext is the same as AllocatePublicVirtualInterface with the addition of the ability to pass a context and additional request options.

See AllocatePublicVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AllocateTransitVirtualInterface ¶

func (c *DirectConnect) AllocateTransitVirtualInterface(input *AllocateTransitVirtualInterfaceInput) (*AllocateTransitVirtualInterfaceOutput, error)

AllocateTransitVirtualInterface API operation for AWS Direct Connect.

Provisions a transit virtual interface to be owned by the specified Amazon Web Services account. Use this type of interface to connect a transit gateway to your Direct Connect gateway.

The owner of a connection provisions a transit virtual interface to be owned by the specified Amazon Web Services account.

After you create a transit virtual interface, it must be confirmed by the owner using ConfirmTransitVirtualInterface. Until this step has been completed, the transit virtual interface is in the requested state and is not available to handle traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocateTransitVirtualInterface for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateTransitVirtualInterface

func (*DirectConnect) AllocateTransitVirtualInterfaceRequest ¶

func (c *DirectConnect) AllocateTransitVirtualInterfaceRequest(input *AllocateTransitVirtualInterfaceInput) (req *request.Request, output *AllocateTransitVirtualInterfaceOutput)

AllocateTransitVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the AllocateTransitVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AllocateTransitVirtualInterface for more information on using the AllocateTransitVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AllocateTransitVirtualInterfaceRequest method.
req, resp := client.AllocateTransitVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateTransitVirtualInterface

func (*DirectConnect) AllocateTransitVirtualInterfaceWithContext ¶

func (c *DirectConnect) AllocateTransitVirtualInterfaceWithContext(ctx aws.Context, input *AllocateTransitVirtualInterfaceInput, opts ...request.Option) (*AllocateTransitVirtualInterfaceOutput, error)

AllocateTransitVirtualInterfaceWithContext is the same as AllocateTransitVirtualInterface with the addition of the ability to pass a context and additional request options.

See AllocateTransitVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AssociateConnectionWithLag ¶

func (c *DirectConnect) AssociateConnectionWithLag(input *AssociateConnectionWithLagInput) (*Connection, error)

AssociateConnectionWithLag API operation for AWS Direct Connect.

Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to Amazon Web Services is interrupted). The connection must be hosted on the same Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can re-associate a connection that's currently associated with a different LAG; however, if removing the connection would cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.

Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.

For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original LAG.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AssociateConnectionWithLag for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateConnectionWithLag

func (*DirectConnect) AssociateConnectionWithLagRequest ¶

func (c *DirectConnect) AssociateConnectionWithLagRequest(input *AssociateConnectionWithLagInput) (req *request.Request, output *Connection)

AssociateConnectionWithLagRequest generates a "aws/request.Request" representing the client's request for the AssociateConnectionWithLag operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AssociateConnectionWithLag for more information on using the AssociateConnectionWithLag API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AssociateConnectionWithLagRequest method.
req, resp := client.AssociateConnectionWithLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateConnectionWithLag

func (*DirectConnect) AssociateConnectionWithLagWithContext ¶

func (c *DirectConnect) AssociateConnectionWithLagWithContext(ctx aws.Context, input *AssociateConnectionWithLagInput, opts ...request.Option) (*Connection, error)

AssociateConnectionWithLagWithContext is the same as AssociateConnectionWithLag with the addition of the ability to pass a context and additional request options.

See AssociateConnectionWithLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AssociateHostedConnection ¶

func (c *DirectConnect) AssociateHostedConnection(input *AssociateHostedConnectionInput) (*Connection, error)

AssociateHostedConnection API operation for AWS Direct Connect.

Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to Amazon Web Services as it is being migrated.

Intended for use by Direct Connect Partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AssociateHostedConnection for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateHostedConnection

func (*DirectConnect) AssociateHostedConnectionRequest ¶

func (c *DirectConnect) AssociateHostedConnectionRequest(input *AssociateHostedConnectionInput) (req *request.Request, output *Connection)

AssociateHostedConnectionRequest generates a "aws/request.Request" representing the client's request for the AssociateHostedConnection operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AssociateHostedConnection for more information on using the AssociateHostedConnection API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AssociateHostedConnectionRequest method.
req, resp := client.AssociateHostedConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateHostedConnection

func (*DirectConnect) AssociateHostedConnectionWithContext ¶

func (c *DirectConnect) AssociateHostedConnectionWithContext(ctx aws.Context, input *AssociateHostedConnectionInput, opts ...request.Option) (*Connection, error)

AssociateHostedConnectionWithContext is the same as AssociateHostedConnection with the addition of the ability to pass a context and additional request options.

See AssociateHostedConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AssociateMacSecKey ¶

func (c *DirectConnect) AssociateMacSecKey(input *AssociateMacSecKeyInput) (*AssociateMacSecKeyOutput, error)

AssociateMacSecKey API operation for AWS Direct Connect.

Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.

You must supply either the secretARN, or the CKN/CAK (ckn and cak) pair in the request.

For information about MAC Security (MACsec) key considerations, see MACsec pre-shared CKN/CAK key considerations (https://docs.aws.amazon.com/directconnect/latest/UserGuide/direct-connect-mac-sec-getting-started.html#mac-sec-key-consideration) in the Direct Connect User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AssociateMacSecKey for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateMacSecKey

func (*DirectConnect) AssociateMacSecKeyRequest ¶

func (c *DirectConnect) AssociateMacSecKeyRequest(input *AssociateMacSecKeyInput) (req *request.Request, output *AssociateMacSecKeyOutput)

AssociateMacSecKeyRequest generates a "aws/request.Request" representing the client's request for the AssociateMacSecKey operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AssociateMacSecKey for more information on using the AssociateMacSecKey API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AssociateMacSecKeyRequest method.
req, resp := client.AssociateMacSecKeyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateMacSecKey

func (*DirectConnect) AssociateMacSecKeyWithContext ¶

func (c *DirectConnect) AssociateMacSecKeyWithContext(ctx aws.Context, input *AssociateMacSecKeyInput, opts ...request.Option) (*AssociateMacSecKeyOutput, error)

AssociateMacSecKeyWithContext is the same as AssociateMacSecKey with the addition of the ability to pass a context and additional request options.

See AssociateMacSecKey for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AssociateVirtualInterface ¶

func (c *DirectConnect) AssociateVirtualInterface(input *AssociateVirtualInterfaceInput) (*VirtualInterface, error)

AssociateVirtualInterface API operation for AWS Direct Connect.

Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to Amazon Web Services is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.

Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.

To reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG for the association.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AssociateVirtualInterface for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateVirtualInterface

func (*DirectConnect) AssociateVirtualInterfaceRequest ¶

func (c *DirectConnect) AssociateVirtualInterfaceRequest(input *AssociateVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

AssociateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the AssociateVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AssociateVirtualInterface for more information on using the AssociateVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AssociateVirtualInterfaceRequest method.
req, resp := client.AssociateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateVirtualInterface

func (*DirectConnect) AssociateVirtualInterfaceWithContext ¶

func (c *DirectConnect) AssociateVirtualInterfaceWithContext(ctx aws.Context, input *AssociateVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

AssociateVirtualInterfaceWithContext is the same as AssociateVirtualInterface with the addition of the ability to pass a context and additional request options.

See AssociateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmConnection ¶

func (c *DirectConnect) ConfirmConnection(input *ConfirmConnectionInput) (*ConfirmConnectionOutput, error)

ConfirmConnection API operation for AWS Direct Connect.

Confirms the creation of the specified hosted connection on an interconnect.

Upon creation, the hosted connection is initially in the Ordering state, and remains in this state until the owner confirms creation of the hosted connection.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmConnection for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmConnection

func (*DirectConnect) ConfirmConnectionRequest ¶

func (c *DirectConnect) ConfirmConnectionRequest(input *ConfirmConnectionInput) (req *request.Request, output *ConfirmConnectionOutput)

ConfirmConnectionRequest generates a "aws/request.Request" representing the client's request for the ConfirmConnection operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ConfirmConnection for more information on using the ConfirmConnection API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ConfirmConnectionRequest method.
req, resp := client.ConfirmConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmConnection

func (*DirectConnect) ConfirmConnectionWithContext ¶

func (c *DirectConnect) ConfirmConnectionWithContext(ctx aws.Context, input *ConfirmConnectionInput, opts ...request.Option) (*ConfirmConnectionOutput, error)

ConfirmConnectionWithContext is the same as ConfirmConnection with the addition of the ability to pass a context and additional request options.

See ConfirmConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmCustomerAgreement ¶

func (c *DirectConnect) ConfirmCustomerAgreement(input *ConfirmCustomerAgreementInput) (*ConfirmCustomerAgreementOutput, error)

ConfirmCustomerAgreement API operation for AWS Direct Connect.

The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmCustomerAgreement for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmCustomerAgreement

func (*DirectConnect) ConfirmCustomerAgreementRequest ¶

func (c *DirectConnect) ConfirmCustomerAgreementRequest(input *ConfirmCustomerAgreementInput) (req *request.Request, output *ConfirmCustomerAgreementOutput)

ConfirmCustomerAgreementRequest generates a "aws/request.Request" representing the client's request for the ConfirmCustomerAgreement operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ConfirmCustomerAgreement for more information on using the ConfirmCustomerAgreement API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ConfirmCustomerAgreementRequest method.
req, resp := client.ConfirmCustomerAgreementRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmCustomerAgreement

func (*DirectConnect) ConfirmCustomerAgreementWithContext ¶

func (c *DirectConnect) ConfirmCustomerAgreementWithContext(ctx aws.Context, input *ConfirmCustomerAgreementInput, opts ...request.Option) (*ConfirmCustomerAgreementOutput, error)

ConfirmCustomerAgreementWithContext is the same as ConfirmCustomerAgreement with the addition of the ability to pass a context and additional request options.

See ConfirmCustomerAgreement for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmPrivateVirtualInterface ¶

func (c *DirectConnect) ConfirmPrivateVirtualInterface(input *ConfirmPrivateVirtualInterfaceInput) (*ConfirmPrivateVirtualInterfaceOutput, error)

ConfirmPrivateVirtualInterface API operation for AWS Direct Connect.

Accepts ownership of a private virtual interface created by another Amazon Web Services account.

After the virtual interface owner makes this call, the virtual interface is created and attached to the specified virtual private gateway or Direct Connect gateway, and is made available to handle traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmPrivateVirtualInterface for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPrivateVirtualInterface

func (*DirectConnect) ConfirmPrivateVirtualInterfaceRequest ¶

func (c *DirectConnect) ConfirmPrivateVirtualInterfaceRequest(input *ConfirmPrivateVirtualInterfaceInput) (req *request.Request, output *ConfirmPrivateVirtualInterfaceOutput)

ConfirmPrivateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the ConfirmPrivateVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ConfirmPrivateVirtualInterface for more information on using the ConfirmPrivateVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ConfirmPrivateVirtualInterfaceRequest method.
req, resp := client.ConfirmPrivateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPrivateVirtualInterface

func (*DirectConnect) ConfirmPrivateVirtualInterfaceWithContext ¶

func (c *DirectConnect) ConfirmPrivateVirtualInterfaceWithContext(ctx aws.Context, input *ConfirmPrivateVirtualInterfaceInput, opts ...request.Option) (*ConfirmPrivateVirtualInterfaceOutput, error)

ConfirmPrivateVirtualInterfaceWithContext is the same as ConfirmPrivateVirtualInterface with the addition of the ability to pass a context and additional request options.

See ConfirmPrivateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmPublicVirtualInterface ¶

func (c *DirectConnect) ConfirmPublicVirtualInterface(input *ConfirmPublicVirtualInterfaceInput) (*ConfirmPublicVirtualInterfaceOutput, error)

ConfirmPublicVirtualInterface API operation for AWS Direct Connect.

Accepts ownership of a public virtual interface created by another Amazon Web Services account.

After the virtual interface owner makes this call, the specified virtual interface is created and made available to handle traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmPublicVirtualInterface for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPublicVirtualInterface

func (*DirectConnect) ConfirmPublicVirtualInterfaceRequest ¶

func (c *DirectConnect) ConfirmPublicVirtualInterfaceRequest(input *ConfirmPublicVirtualInterfaceInput) (req *request.Request, output *ConfirmPublicVirtualInterfaceOutput)

ConfirmPublicVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the ConfirmPublicVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ConfirmPublicVirtualInterface for more information on using the ConfirmPublicVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ConfirmPublicVirtualInterfaceRequest method.
req, resp := client.ConfirmPublicVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPublicVirtualInterface

func (*DirectConnect) ConfirmPublicVirtualInterfaceWithContext ¶

func (c *DirectConnect) ConfirmPublicVirtualInterfaceWithContext(ctx aws.Context, input *ConfirmPublicVirtualInterfaceInput, opts ...request.Option) (*ConfirmPublicVirtualInterfaceOutput, error)

ConfirmPublicVirtualInterfaceWithContext is the same as ConfirmPublicVirtualInterface with the addition of the ability to pass a context and additional request options.

See ConfirmPublicVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmTransitVirtualInterface ¶

func (c *DirectConnect) ConfirmTransitVirtualInterface(input *ConfirmTransitVirtualInterfaceInput) (*ConfirmTransitVirtualInterfaceOutput, error)

ConfirmTransitVirtualInterface API operation for AWS Direct Connect.

Accepts ownership of a transit virtual interface created by another Amazon Web Services account.

After the owner of the transit virtual interface makes this call, the specified transit virtual interface is created and made available to handle traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmTransitVirtualInterface for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmTransitVirtualInterface

func (*DirectConnect) ConfirmTransitVirtualInterfaceRequest ¶

func (c *DirectConnect) ConfirmTransitVirtualInterfaceRequest(input *ConfirmTransitVirtualInterfaceInput) (req *request.Request, output *ConfirmTransitVirtualInterfaceOutput)

ConfirmTransitVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the ConfirmTransitVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ConfirmTransitVirtualInterface for more information on using the ConfirmTransitVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ConfirmTransitVirtualInterfaceRequest method.
req, resp := client.ConfirmTransitVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmTransitVirtualInterface

func (*DirectConnect) ConfirmTransitVirtualInterfaceWithContext ¶

func (c *DirectConnect) ConfirmTransitVirtualInterfaceWithContext(ctx aws.Context, input *ConfirmTransitVirtualInterfaceInput, opts ...request.Option) (*ConfirmTransitVirtualInterfaceOutput, error)

ConfirmTransitVirtualInterfaceWithContext is the same as ConfirmTransitVirtualInterface with the addition of the ability to pass a context and additional request options.

See ConfirmTransitVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateBGPPeer ¶

func (c *DirectConnect) CreateBGPPeer(input *CreateBGPPeerInput) (*CreateBGPPeerOutput, error)

CreateBGPPeer API operation for AWS Direct Connect.

Creates a BGP peer on the specified virtual interface.

You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access Amazon Web Services resources that also use that address family.

If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.

When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.

If you let Amazon Web Services auto-assign IPv4 addresses, a /30 CIDR will be allocated from 169.254.0.0/16. Amazon Web Services does not recommend this option if you intend to use the customer router peer IP address as the source and destination for traffic. Instead you should use RFC 1918 or other addressing, and specify the address yourself. For more information about RFC 1918 see Address Allocation for Private Internets (https://datatracker.ietf.org/doc/html/rfc1918).

For a public virtual interface, the Autonomous System Number (ASN) must be private or already on the allow list for the virtual interface.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateBGPPeer for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateBGPPeer

func (*DirectConnect) CreateBGPPeerRequest ¶

func (c *DirectConnect) CreateBGPPeerRequest(input *CreateBGPPeerInput) (req *request.Request, output *CreateBGPPeerOutput)

CreateBGPPeerRequest generates a "aws/request.Request" representing the client's request for the CreateBGPPeer operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateBGPPeer for more information on using the CreateBGPPeer API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateBGPPeerRequest method.
req, resp := client.CreateBGPPeerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateBGPPeer

func (*DirectConnect) CreateBGPPeerWithContext ¶

func (c *DirectConnect) CreateBGPPeerWithContext(ctx aws.Context, input *CreateBGPPeerInput, opts ...request.Option) (*CreateBGPPeerOutput, error)

CreateBGPPeerWithContext is the same as CreateBGPPeer with the addition of the ability to pass a context and additional request options.

See CreateBGPPeer for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateConnection ¶

func (c *DirectConnect) CreateConnection(input *CreateConnectionInput) (*Connection, error)

CreateConnection API operation for AWS Direct Connect.

Creates a connection between a customer network and a specific Direct Connect location.

A connection links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router.

To find the locations for your Region, use DescribeLocations.

You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection is created.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateConnection for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateConnection

func (*DirectConnect) CreateConnectionRequest ¶

func (c *DirectConnect) CreateConnectionRequest(input *CreateConnectionInput) (req *request.Request, output *Connection)

CreateConnectionRequest generates a "aws/request.Request" representing the client's request for the CreateConnection operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateConnection for more information on using the CreateConnection API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateConnectionRequest method.
req, resp := client.CreateConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateConnection

func (*DirectConnect) CreateConnectionWithContext ¶

func (c *DirectConnect) CreateConnectionWithContext(ctx aws.Context, input *CreateConnectionInput, opts ...request.Option) (*Connection, error)

CreateConnectionWithContext is the same as CreateConnection with the addition of the ability to pass a context and additional request options.

See CreateConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateDirectConnectGateway ¶

func (c *DirectConnect) CreateDirectConnectGateway(input *CreateDirectConnectGatewayInput) (*CreateDirectConnectGatewayOutput, error)

CreateDirectConnectGateway API operation for AWS Direct Connect.

Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. A Direct Connect gateway is global and visible in any Amazon Web Services Region after it is created. The virtual interfaces and virtual private gateways that are connected through a Direct Connect gateway can be in different Amazon Web Services Regions. This enables you to connect to a VPC in any Region, regardless of the Region in which the virtual interfaces are located, and pass traffic between them.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateDirectConnectGateway for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateDirectConnectGateway

func (*DirectConnect) CreateDirectConnectGatewayAssociation ¶

func (c *DirectConnect) CreateDirectConnectGatewayAssociation(input *CreateDirectConnectGatewayAssociationInput) (*CreateDirectConnectGatewayAssociationOutput, error)

CreateDirectConnectGatewayAssociation API operation for AWS Direct Connect.

Creates an association between a Direct Connect gateway and a virtual private gateway. The virtual private gateway must be attached to a VPC and must not be associated with another Direct Connect gateway.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateDirectConnectGatewayAssociation for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateDirectConnectGatewayAssociation

func (*DirectConnect) CreateDirectConnectGatewayAssociationProposal ¶

func (c *DirectConnect) CreateDirectConnectGatewayAssociationProposal(input *CreateDirectConnectGatewayAssociationProposalInput) (*CreateDirectConnectGatewayAssociationProposalOutput, error)

CreateDirectConnectGatewayAssociationProposal API operation for AWS Direct Connect.

Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.

You can associate a Direct Connect gateway and virtual private gateway or transit gateway that is owned by any Amazon Web Services account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateDirectConnectGatewayAssociationProposal for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateDirectConnectGatewayAssociationProposal

func (*DirectConnect) CreateDirectConnectGatewayAssociationProposalRequest ¶

func (c *DirectConnect) CreateDirectConnectGatewayAssociationProposalRequest(input *CreateDirectConnectGatewayAssociationProposalInput) (req *request.Request, output *CreateDirectConnectGatewayAssociationProposalOutput)

CreateDirectConnectGatewayAssociationProposalRequest generates a "aws/request.Request" representing the client's request for the CreateDirectConnectGatewayAssociationProposal operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateDirectConnectGatewayAssociationProposal for more information on using the CreateDirectConnectGatewayAssociationProposal API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateDirectConnectGatewayAssociationProposalRequest method.
req, resp := client.CreateDirectConnectGatewayAssociationProposalRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateDirectConnectGatewayAssociationProposal

func (*DirectConnect) CreateDirectConnectGatewayAssociationProposalWithContext ¶

func (c *DirectConnect) CreateDirectConnectGatewayAssociationProposalWithContext(ctx aws.Context, input *CreateDirectConnectGatewayAssociationProposalInput, opts ...request.Option) (*CreateDirectConnectGatewayAssociationProposalOutput, error)

CreateDirectConnectGatewayAssociationProposalWithContext is the same as CreateDirectConnectGatewayAssociationProposal with the addition of the ability to pass a context and additional request options.

See CreateDirectConnectGatewayAssociationProposal for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateDirectConnectGatewayAssociationRequest ¶

func (c *DirectConnect) CreateDirectConnectGatewayAssociationRequest(input *CreateDirectConnectGatewayAssociationInput) (req *request.Request, output *CreateDirectConnectGatewayAssociationOutput)

CreateDirectConnectGatewayAssociationRequest generates a "aws/request.Request" representing the client's request for the CreateDirectConnectGatewayAssociation operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateDirectConnectGatewayAssociation for more information on using the CreateDirectConnectGatewayAssociation API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateDirectConnectGatewayAssociationRequest method.
req, resp := client.CreateDirectConnectGatewayAssociationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateDirectConnectGatewayAssociation

func (*DirectConnect) CreateDirectConnectGatewayAssociationWithContext ¶

func (c *DirectConnect) CreateDirectConnectGatewayAssociationWithContext(ctx aws.Context, input *CreateDirectConnectGatewayAssociationInput, opts ...request.Option) (*CreateDirectConnectGatewayAssociationOutput, error)

CreateDirectConnectGatewayAssociationWithContext is the same as CreateDirectConnectGatewayAssociation with the addition of the ability to pass a context and additional request options.

See CreateDirectConnectGatewayAssociation for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateDirectConnectGatewayRequest ¶

func (c *DirectConnect) CreateDirectConnectGatewayRequest(input *CreateDirectConnectGatewayInput) (req *request.Request, output *CreateDirectConnectGatewayOutput)

CreateDirectConnectGatewayRequest generates a "aws/request.Request" representing the client's request for the CreateDirectConnectGateway operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateDirectConnectGateway for more information on using the CreateDirectConnectGateway API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateDirectConnectGatewayRequest method.
req, resp := client.CreateDirectConnectGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateDirectConnectGateway

func (*DirectConnect) CreateDirectConnectGatewayWithContext ¶

func (c *DirectConnect) CreateDirectConnectGatewayWithContext(ctx aws.Context, input *CreateDirectConnectGatewayInput, opts ...request.Option) (*CreateDirectConnectGatewayOutput, error)

CreateDirectConnectGatewayWithContext is the same as CreateDirectConnectGateway with the addition of the ability to pass a context and additional request options.

See CreateDirectConnectGateway for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateInterconnect ¶

func (c *DirectConnect) CreateInterconnect(input *CreateInterconnectInput) (*Interconnect, error)

CreateInterconnect API operation for AWS Direct Connect.

Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.

An interconnect is a connection that is capable of hosting other connections. The Direct Connect Partner can use an interconnect to provide Direct Connect hosted connections to customers through their own network services. Like a standard connection, an interconnect links the partner's network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an Direct Connect router.

You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect is created.

For each end customer, the Direct Connect Partner provisions a connection on their interconnect by calling AllocateHostedConnection. The end customer can then connect to Amazon Web Services resources by creating a virtual interface on their connection, using the VLAN assigned to them by the Direct Connect Partner.

Intended for use by Direct Connect Partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateInterconnect for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateInterconnect

func (*DirectConnect) CreateInterconnectRequest ¶

func (c *DirectConnect) CreateInterconnectRequest(input *CreateInterconnectInput) (req *request.Request, output *Interconnect)

CreateInterconnectRequest generates a "aws/request.Request" representing the client's request for the CreateInterconnect operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateInterconnect for more information on using the CreateInterconnect API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateInterconnectRequest method.
req, resp := client.CreateInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateInterconnect

func (*DirectConnect) CreateInterconnectWithContext ¶

func (c *DirectConnect) CreateInterconnectWithContext(ctx aws.Context, input *CreateInterconnectInput, opts ...request.Option) (*Interconnect, error)

CreateInterconnectWithContext is the same as CreateInterconnect with the addition of the ability to pass a context and additional request options.

See CreateInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateLag ¶

func (c *DirectConnect) CreateLag(input *CreateLagInput) (*Lag, error)

CreateLag API operation for AWS Direct Connect.

Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple interfaces, enabling you to treat them as a single interface.

All connections in a LAG must use the same bandwidth (either 1Gbps, 10Gbps, 100Gbps, or 400Gbps) and must terminate at the same Direct Connect endpoint.

You can have up to 10 dedicated connections per location. Regardless of this limit, if you request more connections for the LAG than Direct Connect can allocate on a single endpoint, no LAG is created..

You can specify an existing physical dedicated connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical dedicated connection, and re-establishes them as a member of the LAG. The LAG will be created on the same Direct Connect endpoint to which the dedicated connection terminates. Any virtual interfaces associated with the dedicated connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.

If the Amazon Web Services account used to create a LAG is a registered Direct Connect Partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateLag for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateLag

func (*DirectConnect) CreateLagRequest ¶

func (c *DirectConnect) CreateLagRequest(input *CreateLagInput) (req *request.Request, output *Lag)

CreateLagRequest generates a "aws/request.Request" representing the client's request for the CreateLag operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateLag for more information on using the CreateLag API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateLagRequest method.
req, resp := client.CreateLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateLag

func (*DirectConnect) CreateLagWithContext ¶

func (c *DirectConnect) CreateLagWithContext(ctx aws.Context, input *CreateLagInput, opts ...request.Option) (*Lag, error)

CreateLagWithContext is the same as CreateLag with the addition of the ability to pass a context and additional request options.

See CreateLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreatePrivateVirtualInterface ¶

func (c *DirectConnect) CreatePrivateVirtualInterface(input *CreatePrivateVirtualInterfaceInput) (*VirtualInterface, error)

CreatePrivateVirtualInterface API operation for AWS Direct Connect.

Creates a private virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A private virtual interface can be connected to either a Direct Connect gateway or a Virtual Private Gateway (VGW). Connecting the private virtual interface to a Direct Connect gateway enables the possibility for connecting to multiple VPCs, including VPCs in different Amazon Web Services Regions. Connecting the private virtual interface to a VGW only provides access to a single VPC within the same Region.

Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreatePrivateVirtualInterface for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePrivateVirtualInterface

func (*DirectConnect) CreatePrivateVirtualInterfaceRequest ¶

func (c *DirectConnect) CreatePrivateVirtualInterfaceRequest(input *CreatePrivateVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

CreatePrivateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the CreatePrivateVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreatePrivateVirtualInterface for more information on using the CreatePrivateVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreatePrivateVirtualInterfaceRequest method.
req, resp := client.CreatePrivateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePrivateVirtualInterface

func (*DirectConnect) CreatePrivateVirtualInterfaceWithContext ¶

func (c *DirectConnect) CreatePrivateVirtualInterfaceWithContext(ctx aws.Context, input *CreatePrivateVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

CreatePrivateVirtualInterfaceWithContext is the same as CreatePrivateVirtualInterface with the addition of the ability to pass a context and additional request options.

See CreatePrivateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreatePublicVirtualInterface ¶

func (c *DirectConnect) CreatePublicVirtualInterface(input *CreatePublicVirtualInterfaceInput) (*VirtualInterface, error)

CreatePublicVirtualInterface API operation for AWS Direct Connect.

Creates a public virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A public virtual interface supports sending traffic to public services of Amazon Web Services such as Amazon S3.

When creating an IPv6 public virtual interface (addressFamily is ipv6), leave the customer and amazon address fields blank to use auto-assigned IPv6 space. Custom IPv6 addresses are not supported.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreatePublicVirtualInterface for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePublicVirtualInterface

func (*DirectConnect) CreatePublicVirtualInterfaceRequest ¶

func (c *DirectConnect) CreatePublicVirtualInterfaceRequest(input *CreatePublicVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

CreatePublicVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the CreatePublicVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreatePublicVirtualInterface for more information on using the CreatePublicVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreatePublicVirtualInterfaceRequest method.
req, resp := client.CreatePublicVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePublicVirtualInterface

func (*DirectConnect) CreatePublicVirtualInterfaceWithContext ¶

func (c *DirectConnect) CreatePublicVirtualInterfaceWithContext(ctx aws.Context, input *CreatePublicVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

CreatePublicVirtualInterfaceWithContext is the same as CreatePublicVirtualInterface with the addition of the ability to pass a context and additional request options.

See CreatePublicVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateTransitVirtualInterface ¶

func (c *DirectConnect) CreateTransitVirtualInterface(input *CreateTransitVirtualInterfaceInput) (*CreateTransitVirtualInterfaceOutput, error)

CreateTransitVirtualInterface API operation for AWS Direct Connect.

Creates a transit virtual interface. A transit virtual interface should be used to access one or more transit gateways associated with Direct Connect gateways. A transit virtual interface enables the connection of multiple VPCs attached to a transit gateway to a Direct Connect gateway.

If you associate your transit gateway with one or more Direct Connect gateways, the Autonomous System Number (ASN) used by the transit gateway and the Direct Connect gateway must be different. For example, if you use the default ASN 64512 for both your the transit gateway and Direct Connect gateway, the association request fails.

A jumbo MTU value must be either 1500 or 8500. No other values will be accepted. Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateTransitVirtualInterface for usage and error information.

Returned Error Types:

• DuplicateTagKeysException A tag key was specified more than once.

• TooManyTagsException You have reached the limit on the number of tags that can be assigned.

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateTransitVirtualInterface

func (*DirectConnect) CreateTransitVirtualInterfaceRequest ¶

func (c *DirectConnect) CreateTransitVirtualInterfaceRequest(input *CreateTransitVirtualInterfaceInput) (req *request.Request, output *CreateTransitVirtualInterfaceOutput)

CreateTransitVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the CreateTransitVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateTransitVirtualInterface for more information on using the CreateTransitVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateTransitVirtualInterfaceRequest method.
req, resp := client.CreateTransitVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateTransitVirtualInterface

func (*DirectConnect) CreateTransitVirtualInterfaceWithContext ¶

func (c *DirectConnect) CreateTransitVirtualInterfaceWithContext(ctx aws.Context, input *CreateTransitVirtualInterfaceInput, opts ...request.Option) (*CreateTransitVirtualInterfaceOutput, error)

CreateTransitVirtualInterfaceWithContext is the same as CreateTransitVirtualInterface with the addition of the ability to pass a context and additional request options.

See CreateTransitVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteBGPPeer ¶

func (c *DirectConnect) DeleteBGPPeer(input *DeleteBGPPeerInput) (*DeleteBGPPeerOutput, error)

DeleteBGPPeer API operation for AWS Direct Connect.

Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.

You cannot delete the last BGP peer from a virtual interface.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteBGPPeer for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteBGPPeer

func (*DirectConnect) DeleteBGPPeerRequest ¶

func (c *DirectConnect) DeleteBGPPeerRequest(input *DeleteBGPPeerInput) (req *request.Request, output *DeleteBGPPeerOutput)

DeleteBGPPeerRequest generates a "aws/request.Request" representing the client's request for the DeleteBGPPeer operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteBGPPeer for more information on using the DeleteBGPPeer API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteBGPPeerRequest method.
req, resp := client.DeleteBGPPeerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteBGPPeer

func (*DirectConnect) DeleteBGPPeerWithContext ¶

func (c *DirectConnect) DeleteBGPPeerWithContext(ctx aws.Context, input *DeleteBGPPeerInput, opts ...request.Option) (*DeleteBGPPeerOutput, error)

DeleteBGPPeerWithContext is the same as DeleteBGPPeer with the addition of the ability to pass a context and additional request options.

See DeleteBGPPeer for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteConnection ¶

func (c *DirectConnect) DeleteConnection(input *DeleteConnectionInput) (*Connection, error)

DeleteConnection API operation for AWS Direct Connect.

Deletes the specified connection.

Deleting a connection only stops the Direct Connect port hour and data transfer charges. If you are partnering with any third parties to connect with the Direct Connect location, you must cancel your service with them separately.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteConnection for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteConnection

func (*DirectConnect) DeleteConnectionRequest ¶

func (c *DirectConnect) DeleteConnectionRequest(input *DeleteConnectionInput) (req *request.Request, output *Connection)

DeleteConnectionRequest generates a "aws/request.Request" representing the client's request for the DeleteConnection operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteConnection for more information on using the DeleteConnection API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteConnectionRequest method.
req, resp := client.DeleteConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteConnection

func (*DirectConnect) DeleteConnectionWithContext ¶

func (c *DirectConnect) DeleteConnectionWithContext(ctx aws.Context, input *DeleteConnectionInput, opts ...request.Option) (*Connection, error)

DeleteConnectionWithContext is the same as DeleteConnection with the addition of the ability to pass a context and additional request options.

See DeleteConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteDirectConnectGateway ¶

func (c *DirectConnect) DeleteDirectConnectGateway(input *DeleteDirectConnectGatewayInput) (*DeleteDirectConnectGatewayOutput, error)

DeleteDirectConnectGateway API operation for AWS Direct Connect.

Deletes the specified Direct Connect gateway. You must first delete all virtual interfaces that are attached to the Direct Connect gateway and disassociate all virtual private gateways associated with the Direct Connect gateway.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteDirectConnectGateway for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteDirectConnectGateway

func (*DirectConnect) DeleteDirectConnectGatewayAssociation ¶

func (c *DirectConnect) DeleteDirectConnectGatewayAssociation(input *DeleteDirectConnectGatewayAssociationInput) (*DeleteDirectConnectGatewayAssociationOutput, error)

DeleteDirectConnectGatewayAssociation API operation for AWS Direct Connect.

Deletes the association between the specified Direct Connect gateway and virtual private gateway.

We recommend that you specify the associationID to delete the association. Alternatively, if you own virtual gateway and a Direct Connect gateway association, you can specify the virtualGatewayId and directConnectGatewayId to delete an association.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteDirectConnectGatewayAssociation for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteDirectConnectGatewayAssociation

func (*DirectConnect) DeleteDirectConnectGatewayAssociationProposal ¶

func (c *DirectConnect) DeleteDirectConnectGatewayAssociationProposal(input *DeleteDirectConnectGatewayAssociationProposalInput) (*DeleteDirectConnectGatewayAssociationProposalOutput, error)

DeleteDirectConnectGatewayAssociationProposal API operation for AWS Direct Connect.

Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteDirectConnectGatewayAssociationProposal for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteDirectConnectGatewayAssociationProposal

func (*DirectConnect) DeleteDirectConnectGatewayAssociationProposalRequest ¶

func (c *DirectConnect) DeleteDirectConnectGatewayAssociationProposalRequest(input *DeleteDirectConnectGatewayAssociationProposalInput) (req *request.Request, output *DeleteDirectConnectGatewayAssociationProposalOutput)

DeleteDirectConnectGatewayAssociationProposalRequest generates a "aws/request.Request" representing the client's request for the DeleteDirectConnectGatewayAssociationProposal operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteDirectConnectGatewayAssociationProposal for more information on using the DeleteDirectConnectGatewayAssociationProposal API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteDirectConnectGatewayAssociationProposalRequest method.
req, resp := client.DeleteDirectConnectGatewayAssociationProposalRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteDirectConnectGatewayAssociationProposal

func (*DirectConnect) DeleteDirectConnectGatewayAssociationProposalWithContext ¶

func (c *DirectConnect) DeleteDirectConnectGatewayAssociationProposalWithContext(ctx aws.Context, input *DeleteDirectConnectGatewayAssociationProposalInput, opts ...request.Option) (*DeleteDirectConnectGatewayAssociationProposalOutput, error)

DeleteDirectConnectGatewayAssociationProposalWithContext is the same as DeleteDirectConnectGatewayAssociationProposal with the addition of the ability to pass a context and additional request options.

See DeleteDirectConnectGatewayAssociationProposal for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteDirectConnectGatewayAssociationRequest ¶

func (c *DirectConnect) DeleteDirectConnectGatewayAssociationRequest(input *DeleteDirectConnectGatewayAssociationInput) (req *request.Request, output *DeleteDirectConnectGatewayAssociationOutput)

DeleteDirectConnectGatewayAssociationRequest generates a "aws/request.Request" representing the client's request for the DeleteDirectConnectGatewayAssociation operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteDirectConnectGatewayAssociation for more information on using the DeleteDirectConnectGatewayAssociation API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteDirectConnectGatewayAssociationRequest method.
req, resp := client.DeleteDirectConnectGatewayAssociationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteDirectConnectGatewayAssociation

func (*DirectConnect) DeleteDirectConnectGatewayAssociationWithContext ¶

func (c *DirectConnect) DeleteDirectConnectGatewayAssociationWithContext(ctx aws.Context, input *DeleteDirectConnectGatewayAssociationInput, opts ...request.Option) (*DeleteDirectConnectGatewayAssociationOutput, error)

DeleteDirectConnectGatewayAssociationWithContext is the same as DeleteDirectConnectGatewayAssociation with the addition of the ability to pass a context and additional request options.

See DeleteDirectConnectGatewayAssociation for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteDirectConnectGatewayRequest ¶

func (c *DirectConnect) DeleteDirectConnectGatewayRequest(input *DeleteDirectConnectGatewayInput) (req *request.Request, output *DeleteDirectConnectGatewayOutput)

DeleteDirectConnectGatewayRequest generates a "aws/request.Request" representing the client's request for the DeleteDirectConnectGateway operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteDirectConnectGateway for more information on using the DeleteDirectConnectGateway API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteDirectConnectGatewayRequest method.
req, resp := client.DeleteDirectConnectGatewayRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteDirectConnectGateway

func (*DirectConnect) DeleteDirectConnectGatewayWithContext ¶

func (c *DirectConnect) DeleteDirectConnectGatewayWithContext(ctx aws.Context, input *DeleteDirectConnectGatewayInput, opts ...request.Option) (*DeleteDirectConnectGatewayOutput, error)

DeleteDirectConnectGatewayWithContext is the same as DeleteDirectConnectGateway with the addition of the ability to pass a context and additional request options.

See DeleteDirectConnectGateway for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteInterconnect ¶

func (c *DirectConnect) DeleteInterconnect(input *DeleteInterconnectInput) (*DeleteInterconnectOutput, error)

DeleteInterconnect API operation for AWS Direct Connect.

Deletes the specified interconnect.

Intended for use by Direct Connect Partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteInterconnect for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteInterconnect

func (*DirectConnect) DeleteInterconnectRequest ¶

func (c *DirectConnect) DeleteInterconnectRequest(input *DeleteInterconnectInput) (req *request.Request, output *DeleteInterconnectOutput)

DeleteInterconnectRequest generates a "aws/request.Request" representing the client's request for the DeleteInterconnect operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteInterconnect for more information on using the DeleteInterconnect API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteInterconnectRequest method.
req, resp := client.DeleteInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteInterconnect

func (*DirectConnect) DeleteInterconnectWithContext ¶

func (c *DirectConnect) DeleteInterconnectWithContext(ctx aws.Context, input *DeleteInterconnectInput, opts ...request.Option) (*DeleteInterconnectOutput, error)

DeleteInterconnectWithContext is the same as DeleteInterconnect with the addition of the ability to pass a context and additional request options.

See DeleteInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteLag ¶

func (c *DirectConnect) DeleteLag(input *DeleteLagInput) (*Lag, error)

DeleteLag API operation for AWS Direct Connect.

Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteLag for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteLag

func (*DirectConnect) DeleteLagRequest ¶

func (c *DirectConnect) DeleteLagRequest(input *DeleteLagInput) (req *request.Request, output *Lag)

DeleteLagRequest generates a "aws/request.Request" representing the client's request for the DeleteLag operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteLag for more information on using the DeleteLag API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteLagRequest method.
req, resp := client.DeleteLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteLag

func (*DirectConnect) DeleteLagWithContext ¶

func (c *DirectConnect) DeleteLagWithContext(ctx aws.Context, input *DeleteLagInput, opts ...request.Option) (*Lag, error)

DeleteLagWithContext is the same as DeleteLag with the addition of the ability to pass a context and additional request options.

See DeleteLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteVirtualInterface ¶

func (c *DirectConnect) DeleteVirtualInterface(input *DeleteVirtualInterfaceInput) (*DeleteVirtualInterfaceOutput, error)

DeleteVirtualInterface API operation for AWS Direct Connect.

Deletes a virtual interface.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteVirtualInterface for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteVirtualInterface

func (*DirectConnect) DeleteVirtualInterfaceRequest ¶

func (c *DirectConnect) DeleteVirtualInterfaceRequest(input *DeleteVirtualInterfaceInput) (req *request.Request, output *DeleteVirtualInterfaceOutput)

DeleteVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the DeleteVirtualInterface operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteVirtualInterface for more information on using the DeleteVirtualInterface API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteVirtualInterfaceRequest method.
req, resp := client.DeleteVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteVirtualInterface

func (*DirectConnect) DeleteVirtualInterfaceWithContext ¶

func (c *DirectConnect) DeleteVirtualInterfaceWithContext(ctx aws.Context, input *DeleteVirtualInterfaceInput, opts ...request.Option) (*DeleteVirtualInterfaceOutput, error)

DeleteVirtualInterfaceWithContext is the same as DeleteVirtualInterface with the addition of the ability to pass a context and additional request options.

See DeleteVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeConnectionLoa ¶

func (c *DirectConnect) DescribeConnectionLoa(input *DescribeConnectionLoaInput) (*DescribeConnectionLoaOutput, error)

DescribeConnectionLoa API operation for AWS Direct Connect.

Deprecated. Use DescribeLoa instead.

Gets the LOA-CFA for a connection.

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that your APN partner or service provider uses when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see Requesting Cross Connects at Direct Connect Locations (https://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html) in the Direct Connect User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeConnectionLoa for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionLoa

Deprecated: DescribeConnectionLoa has been deprecated

func (*DirectConnect) DescribeConnectionLoaRequest ¶

func (c *DirectConnect) DescribeConnectionLoaRequest(input *DescribeConnectionLoaInput) (req *request.Request, output *DescribeConnectionLoaOutput)

DescribeConnectionLoaRequest generates a "aws/request.Request" representing the client's request for the DescribeConnectionLoa operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeConnectionLoa for more information on using the DescribeConnectionLoa API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeConnectionLoaRequest method.
req, resp := client.DescribeConnectionLoaRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionLoa

Deprecated: DescribeConnectionLoa has been deprecated

func (*DirectConnect) DescribeConnectionLoaWithContext ¶

func (c *DirectConnect) DescribeConnectionLoaWithContext(ctx aws.Context, input *DescribeConnectionLoaInput, opts ...request.Option) (*DescribeConnectionLoaOutput, error)

DescribeConnectionLoaWithContext is the same as DescribeConnectionLoa with the addition of the ability to pass a context and additional request options.

See DescribeConnectionLoa for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

Deprecated: DescribeConnectionLoaWithContext has been deprecated

func (*DirectConnect) DescribeConnections ¶

func (c *DirectConnect) DescribeConnections(input *DescribeConnectionsInput) (*Connections, error)

DescribeConnections API operation for AWS Direct Connect.

Displays the specified connection or all connections in this Region.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeConnections for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnections

func (*DirectConnect) DescribeConnectionsOnInterconnect ¶

func (c *DirectConnect) DescribeConnectionsOnInterconnect(input *DescribeConnectionsOnInterconnectInput) (*Connections, error)

DescribeConnectionsOnInterconnect API operation for AWS Direct Connect.

Deprecated. Use DescribeHostedConnections instead.

Lists the connections that have been provisioned on the specified interconnect.

Intended for use by Direct Connect Partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeConnectionsOnInterconnect for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionsOnInterconnect

Deprecated: DescribeConnectionsOnInterconnect has been deprecated

func (*DirectConnect) DescribeConnectionsOnInterconnectRequest ¶

func (c *DirectConnect) DescribeConnectionsOnInterconnectRequest(input *DescribeConnectionsOnInterconnectInput) (req *request.Request, output *Connections)

DescribeConnectionsOnInterconnectRequest generates a "aws/request.Request" representing the client's request for the DescribeConnectionsOnInterconnect operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeConnectionsOnInterconnect for more information on using the DescribeConnectionsOnInterconnect API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeConnectionsOnInterconnectRequest method.
req, resp := client.DescribeConnectionsOnInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionsOnInterconnect

Deprecated: DescribeConnectionsOnInterconnect has been deprecated

func (*DirectConnect) DescribeConnectionsOnInterconnectWithContext ¶

func (c *DirectConnect) DescribeConnectionsOnInterconnectWithContext(ctx aws.Context, input *DescribeConnectionsOnInterconnectInput, opts ...request.Option) (*Connections, error)

DescribeConnectionsOnInterconnectWithContext is the same as DescribeConnectionsOnInterconnect with the addition of the ability to pass a context and additional request options.

See DescribeConnectionsOnInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

Deprecated: DescribeConnectionsOnInterconnectWithContext has been deprecated

func (*DirectConnect) DescribeConnectionsRequest ¶

func (c *DirectConnect) DescribeConnectionsRequest(input *DescribeConnectionsInput) (req *request.Request, output *Connections)

DescribeConnectionsRequest generates a "aws/request.Request" representing the client's request for the DescribeConnections operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeConnections for more information on using the DescribeConnections API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeConnectionsRequest method.
req, resp := client.DescribeConnectionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnections

func (*DirectConnect) DescribeConnectionsWithContext ¶

func (c *DirectConnect) DescribeConnectionsWithContext(ctx aws.Context, input *DescribeConnectionsInput, opts ...request.Option) (*Connections, error)

DescribeConnectionsWithContext is the same as DescribeConnections with the addition of the ability to pass a context and additional request options.

See DescribeConnections for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeCustomerMetadata ¶

func (c *DirectConnect) DescribeCustomerMetadata(input *DescribeCustomerMetadataInput) (*DescribeCustomerMetadataOutput, error)

DescribeCustomerMetadata API operation for AWS Direct Connect.

Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeCustomerMetadata for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeCustomerMetadata

func (*DirectConnect) DescribeCustomerMetadataRequest ¶

func (c *DirectConnect) DescribeCustomerMetadataRequest(input *DescribeCustomerMetadataInput) (req *request.Request, output *DescribeCustomerMetadataOutput)

DescribeCustomerMetadataRequest generates a "aws/request.Request" representing the client's request for the DescribeCustomerMetadata operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeCustomerMetadata for more information on using the DescribeCustomerMetadata API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeCustomerMetadataRequest method.
req, resp := client.DescribeCustomerMetadataRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeCustomerMetadata

func (*DirectConnect) DescribeCustomerMetadataWithContext ¶

func (c *DirectConnect) DescribeCustomerMetadataWithContext(ctx aws.Context, input *DescribeCustomerMetadataInput, opts ...request.Option) (*DescribeCustomerMetadataOutput, error)

DescribeCustomerMetadataWithContext is the same as DescribeCustomerMetadata with the addition of the ability to pass a context and additional request options.

See DescribeCustomerMetadata for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeDirectConnectGatewayAssociationProposals ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAssociationProposals(input *DescribeDirectConnectGatewayAssociationProposalsInput) (*DescribeDirectConnectGatewayAssociationProposalsOutput, error)

DescribeDirectConnectGatewayAssociationProposals API operation for AWS Direct Connect.

Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeDirectConnectGatewayAssociationProposals for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGatewayAssociationProposals

func (*DirectConnect) DescribeDirectConnectGatewayAssociationProposalsRequest ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAssociationProposalsRequest(input *DescribeDirectConnectGatewayAssociationProposalsInput) (req *request.Request, output *DescribeDirectConnectGatewayAssociationProposalsOutput)

DescribeDirectConnectGatewayAssociationProposalsRequest generates a "aws/request.Request" representing the client's request for the DescribeDirectConnectGatewayAssociationProposals operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeDirectConnectGatewayAssociationProposals for more information on using the DescribeDirectConnectGatewayAssociationProposals API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeDirectConnectGatewayAssociationProposalsRequest method.
req, resp := client.DescribeDirectConnectGatewayAssociationProposalsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGatewayAssociationProposals

func (*DirectConnect) DescribeDirectConnectGatewayAssociationProposalsWithContext ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAssociationProposalsWithContext(ctx aws.Context, input *DescribeDirectConnectGatewayAssociationProposalsInput, opts ...request.Option) (*DescribeDirectConnectGatewayAssociationProposalsOutput, error)

DescribeDirectConnectGatewayAssociationProposalsWithContext is the same as DescribeDirectConnectGatewayAssociationProposals with the addition of the ability to pass a context and additional request options.

See DescribeDirectConnectGatewayAssociationProposals for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeDirectConnectGatewayAssociations ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAssociations(input *DescribeDirectConnectGatewayAssociationsInput) (*DescribeDirectConnectGatewayAssociationsOutput, error)

DescribeDirectConnectGatewayAssociations API operation for AWS Direct Connect.

Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways. You must specify one of the following:

• A Direct Connect gateway The response contains all virtual private gateways and transit gateways associated with the Direct Connect gateway.

• A virtual private gateway The response contains the Direct Connect gateway.

• A transit gateway The response contains the Direct Connect gateway.

• A Direct Connect gateway and a virtual private gateway The response contains the association between the Direct Connect gateway and virtual private gateway.

• A Direct Connect gateway and a transit gateway The response contains the association between the Direct Connect gateway and transit gateway.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeDirectConnectGatewayAssociations for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGatewayAssociations

func (*DirectConnect) DescribeDirectConnectGatewayAssociationsRequest ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAssociationsRequest(input *DescribeDirectConnectGatewayAssociationsInput) (req *request.Request, output *DescribeDirectConnectGatewayAssociationsOutput)

DescribeDirectConnectGatewayAssociationsRequest generates a "aws/request.Request" representing the client's request for the DescribeDirectConnectGatewayAssociations operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeDirectConnectGatewayAssociations for more information on using the DescribeDirectConnectGatewayAssociations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeDirectConnectGatewayAssociationsRequest method.
req, resp := client.DescribeDirectConnectGatewayAssociationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGatewayAssociations

func (*DirectConnect) DescribeDirectConnectGatewayAssociationsWithContext ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAssociationsWithContext(ctx aws.Context, input *DescribeDirectConnectGatewayAssociationsInput, opts ...request.Option) (*DescribeDirectConnectGatewayAssociationsOutput, error)

DescribeDirectConnectGatewayAssociationsWithContext is the same as DescribeDirectConnectGatewayAssociations with the addition of the ability to pass a context and additional request options.

See DescribeDirectConnectGatewayAssociations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeDirectConnectGatewayAttachments ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAttachments(input *DescribeDirectConnectGatewayAttachmentsInput) (*DescribeDirectConnectGatewayAttachmentsOutput, error)

DescribeDirectConnectGatewayAttachments API operation for AWS Direct Connect.

Lists the attachments between your Direct Connect gateways and virtual interfaces. You must specify a Direct Connect gateway, a virtual interface, or both. If you specify a Direct Connect gateway, the response contains all virtual interfaces attached to the Direct Connect gateway. If you specify a virtual interface, the response contains all Direct Connect gateways attached to the virtual interface. If you specify both, the response contains the attachment between the Direct Connect gateway and the virtual interface.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeDirectConnectGatewayAttachments for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGatewayAttachments

func (*DirectConnect) DescribeDirectConnectGatewayAttachmentsRequest ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAttachmentsRequest(input *DescribeDirectConnectGatewayAttachmentsInput) (req *request.Request, output *DescribeDirectConnectGatewayAttachmentsOutput)

DescribeDirectConnectGatewayAttachmentsRequest generates a "aws/request.Request" representing the client's request for the DescribeDirectConnectGatewayAttachments operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeDirectConnectGatewayAttachments for more information on using the DescribeDirectConnectGatewayAttachments API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeDirectConnectGatewayAttachmentsRequest method.
req, resp := client.DescribeDirectConnectGatewayAttachmentsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGatewayAttachments

func (*DirectConnect) DescribeDirectConnectGatewayAttachmentsWithContext ¶

func (c *DirectConnect) DescribeDirectConnectGatewayAttachmentsWithContext(ctx aws.Context, input *DescribeDirectConnectGatewayAttachmentsInput, opts ...request.Option) (*DescribeDirectConnectGatewayAttachmentsOutput, error)

DescribeDirectConnectGatewayAttachmentsWithContext is the same as DescribeDirectConnectGatewayAttachments with the addition of the ability to pass a context and additional request options.

See DescribeDirectConnectGatewayAttachments for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeDirectConnectGateways ¶

func (c *DirectConnect) DescribeDirectConnectGateways(input *DescribeDirectConnectGatewaysInput) (*DescribeDirectConnectGatewaysOutput, error)

DescribeDirectConnectGateways API operation for AWS Direct Connect.

Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeDirectConnectGateways for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGateways

func (*DirectConnect) DescribeDirectConnectGatewaysRequest ¶

func (c *DirectConnect) DescribeDirectConnectGatewaysRequest(input *DescribeDirectConnectGatewaysInput) (req *request.Request, output *DescribeDirectConnectGatewaysOutput)

DescribeDirectConnectGatewaysRequest generates a "aws/request.Request" representing the client's request for the DescribeDirectConnectGateways operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeDirectConnectGateways for more information on using the DescribeDirectConnectGateways API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeDirectConnectGatewaysRequest method.
req, resp := client.DescribeDirectConnectGatewaysRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeDirectConnectGateways

func (*DirectConnect) DescribeDirectConnectGatewaysWithContext ¶

func (c *DirectConnect) DescribeDirectConnectGatewaysWithContext(ctx aws.Context, input *DescribeDirectConnectGatewaysInput, opts ...request.Option) (*DescribeDirectConnectGatewaysOutput, error)

DescribeDirectConnectGatewaysWithContext is the same as DescribeDirectConnectGateways with the addition of the ability to pass a context and additional request options.

See DescribeDirectConnectGateways for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeHostedConnections ¶

func (c *DirectConnect) DescribeHostedConnections(input *DescribeHostedConnectionsInput) (*Connections, error)

DescribeHostedConnections API operation for AWS Direct Connect.

Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).

Intended for use by Direct Connect Partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeHostedConnections for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeHostedConnections

func (*DirectConnect) DescribeHostedConnectionsRequest ¶

func (c *DirectConnect) DescribeHostedConnectionsRequest(input *DescribeHostedConnectionsInput) (req *request.Request, output *Connections)

DescribeHostedConnectionsRequest generates a "aws/request.Request" representing the client's request for the DescribeHostedConnections operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeHostedConnections for more information on using the DescribeHostedConnections API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeHostedConnectionsRequest method.
req, resp := client.DescribeHostedConnectionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeHostedConnections

func (*DirectConnect) DescribeHostedConnectionsWithContext ¶

func (c *DirectConnect) DescribeHostedConnectionsWithContext(ctx aws.Context, input *DescribeHostedConnectionsInput, opts ...request.Option) (*Connections, error)

DescribeHostedConnectionsWithContext is the same as DescribeHostedConnections with the addition of the ability to pass a context and additional request options.

See DescribeHostedConnections for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeInterconnectLoa ¶

func (c *DirectConnect) DescribeInterconnectLoa(input *DescribeInterconnectLoaInput) (*DescribeInterconnectLoaOutput, error)

DescribeInterconnectLoa API operation for AWS Direct Connect.

Deprecated. Use DescribeLoa instead.

Gets the LOA-CFA for the specified interconnect.

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see Requesting Cross Connects at Direct Connect Locations (https://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html) in the Direct Connect User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeInterconnectLoa for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnectLoa

Deprecated: DescribeInterconnectLoa has been deprecated

func (*DirectConnect) DescribeInterconnectLoaRequest ¶

func (c *DirectConnect) DescribeInterconnectLoaRequest(input *DescribeInterconnectLoaInput) (req *request.Request, output *DescribeInterconnectLoaOutput)

DescribeInterconnectLoaRequest generates a "aws/request.Request" representing the client's request for the DescribeInterconnectLoa operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeInterconnectLoa for more information on using the DescribeInterconnectLoa API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeInterconnectLoaRequest method.
req, resp := client.DescribeInterconnectLoaRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnectLoa

Deprecated: DescribeInterconnectLoa has been deprecated

func (*DirectConnect) DescribeInterconnectLoaWithContext ¶

func (c *DirectConnect) DescribeInterconnectLoaWithContext(ctx aws.Context, input *DescribeInterconnectLoaInput, opts ...request.Option) (*DescribeInterconnectLoaOutput, error)

DescribeInterconnectLoaWithContext is the same as DescribeInterconnectLoa with the addition of the ability to pass a context and additional request options.

See DescribeInterconnectLoa for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

Deprecated: DescribeInterconnectLoaWithContext has been deprecated

func (*DirectConnect) DescribeInterconnects ¶

func (c *DirectConnect) DescribeInterconnects(input *DescribeInterconnectsInput) (*DescribeInterconnectsOutput, error)

DescribeInterconnects API operation for AWS Direct Connect.

Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeInterconnects for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnects

func (*DirectConnect) DescribeInterconnectsRequest ¶

func (c *DirectConnect) DescribeInterconnectsRequest(input *DescribeInterconnectsInput) (req *request.Request, output *DescribeInterconnectsOutput)

DescribeInterconnectsRequest generates a "aws/request.Request" representing the client's request for the DescribeInterconnects operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeInterconnects for more information on using the DescribeInterconnects API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeInterconnectsRequest method.
req, resp := client.DescribeInterconnectsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnects

func (*DirectConnect) DescribeInterconnectsWithContext ¶

func (c *DirectConnect) DescribeInterconnectsWithContext(ctx aws.Context, input *DescribeInterconnectsInput, opts ...request.Option) (*DescribeInterconnectsOutput, error)

DescribeInterconnectsWithContext is the same as DescribeInterconnects with the addition of the ability to pass a context and additional request options.

See DescribeInterconnects for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeLags ¶

func (c *DirectConnect) DescribeLags(input *DescribeLagsInput) (*DescribeLagsOutput, error)

DescribeLags API operation for AWS Direct Connect.

Describes all your link aggregation groups (LAG) or the specified LAG.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeLags for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLags

func (*DirectConnect) DescribeLagsRequest ¶

func (c *DirectConnect) DescribeLagsRequest(input *DescribeLagsInput) (req *request.Request, output *DescribeLagsOutput)

DescribeLagsRequest generates a "aws/request.Request" representing the client's request for the DescribeLags operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeLags for more information on using the DescribeLags API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeLagsRequest method.
req, resp := client.DescribeLagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLags

func (*DirectConnect) DescribeLagsWithContext ¶

func (c *DirectConnect) DescribeLagsWithContext(ctx aws.Context, input *DescribeLagsInput, opts ...request.Option) (*DescribeLagsOutput, error)

DescribeLagsWithContext is the same as DescribeLags with the addition of the ability to pass a context and additional request options.

See DescribeLags for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeLoa ¶

func (c *DirectConnect) DescribeLoa(input *DescribeLoaInput) (*Loa, error)

DescribeLoa API operation for AWS Direct Connect.

Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see Requesting Cross Connects at Direct Connect Locations (https://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html) in the Direct Connect User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeLoa for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLoa

func (*DirectConnect) DescribeLoaRequest ¶

func (c *DirectConnect) DescribeLoaRequest(input *DescribeLoaInput) (req *request.Request, output *Loa)

DescribeLoaRequest generates a "aws/request.Request" representing the client's request for the DescribeLoa operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeLoa for more information on using the DescribeLoa API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeLoaRequest method.
req, resp := client.DescribeLoaRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLoa

func (*DirectConnect) DescribeLoaWithContext ¶

func (c *DirectConnect) DescribeLoaWithContext(ctx aws.Context, input *DescribeLoaInput, opts ...request.Option) (*Loa, error)

DescribeLoaWithContext is the same as DescribeLoa with the addition of the ability to pass a context and additional request options.

See DescribeLoa for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeLocations ¶

func (c *DirectConnect) DescribeLocations(input *DescribeLocationsInput) (*DescribeLocationsOutput, error)

DescribeLocations API operation for AWS Direct Connect.

Lists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeLocations for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLocations

func (*DirectConnect) DescribeLocationsRequest ¶

func (c *DirectConnect) DescribeLocationsRequest(input *DescribeLocationsInput) (req *request.Request, output *DescribeLocationsOutput)

DescribeLocationsRequest generates a "aws/request.Request" representing the client's request for the DescribeLocations operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeLocations for more information on using the DescribeLocations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeLocationsRequest method.
req, resp := client.DescribeLocationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLocations

func (*DirectConnect) DescribeLocationsWithContext ¶

func (c *DirectConnect) DescribeLocationsWithContext(ctx aws.Context, input *DescribeLocationsInput, opts ...request.Option) (*DescribeLocationsOutput, error)

DescribeLocationsWithContext is the same as DescribeLocations with the addition of the ability to pass a context and additional request options.

See DescribeLocations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeRouterConfiguration ¶

func (c *DirectConnect) DescribeRouterConfiguration(input *DescribeRouterConfigurationInput) (*DescribeRouterConfigurationOutput, error)

DescribeRouterConfiguration API operation for AWS Direct Connect.

Details about the router.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeRouterConfiguration for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeRouterConfiguration

func (*DirectConnect) DescribeRouterConfigurationRequest ¶

func (c *DirectConnect) DescribeRouterConfigurationRequest(input *DescribeRouterConfigurationInput) (req *request.Request, output *DescribeRouterConfigurationOutput)

DescribeRouterConfigurationRequest generates a "aws/request.Request" representing the client's request for the DescribeRouterConfiguration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeRouterConfiguration for more information on using the DescribeRouterConfiguration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeRouterConfigurationRequest method.
req, resp := client.DescribeRouterConfigurationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeRouterConfiguration

func (*DirectConnect) DescribeRouterConfigurationWithContext ¶

func (c *DirectConnect) DescribeRouterConfigurationWithContext(ctx aws.Context, input *DescribeRouterConfigurationInput, opts ...request.Option) (*DescribeRouterConfigurationOutput, error)

DescribeRouterConfigurationWithContext is the same as DescribeRouterConfiguration with the addition of the ability to pass a context and additional request options.

See DescribeRouterConfiguration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeTags ¶

func (c *DirectConnect) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error)

DescribeTags API operation for AWS Direct Connect.

Describes the tags associated with the specified Direct Connect resources.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeTags for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeTags

func (*DirectConnect) DescribeTagsRequest ¶

func (c *DirectConnect) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Request, output *DescribeTagsOutput)

DescribeTagsRequest generates a "aws/request.Request" representing the client's request for the DescribeTags operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeTags for more information on using the DescribeTags API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeTagsRequest method.
req, resp := client.DescribeTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeTags

func (*DirectConnect) DescribeTagsWithContext ¶

func (c *DirectConnect) DescribeTagsWithContext(ctx aws.Context, input *DescribeTagsInput, opts ...request.Option) (*DescribeTagsOutput, error)

DescribeTagsWithContext is the same as DescribeTags with the addition of the ability to pass a context and additional request options.

See DescribeTags for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeVirtualGateways ¶

func (c *DirectConnect) DescribeVirtualGateways(input *DescribeVirtualGatewaysInput) (*DescribeVirtualGatewaysOutput, error)

DescribeVirtualGateways API operation for AWS Direct Connect.

Deprecated. Use DescribeVpnGateways instead. See DescribeVPNGateways (https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_DescribeVpnGateways.html) in the Amazon Elastic Compute Cloud API Reference.

Lists the virtual private gateways owned by the Amazon Web Services account.

You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeVirtualGateways for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualGateways

func (*DirectConnect) DescribeVirtualGatewaysRequest ¶

func (c *DirectConnect) DescribeVirtualGatewaysRequest(input *DescribeVirtualGatewaysInput) (req *request.Request, output *DescribeVirtualGatewaysOutput)

DescribeVirtualGatewaysRequest generates a "aws/request.Request" representing the client's request for the DescribeVirtualGateways operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeVirtualGateways for more information on using the DescribeVirtualGateways API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeVirtualGatewaysRequest method.
req, resp := client.DescribeVirtualGatewaysRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualGateways

func (*DirectConnect) DescribeVirtualGatewaysWithContext ¶

func (c *DirectConnect) DescribeVirtualGatewaysWithContext(ctx aws.Context, input *DescribeVirtualGatewaysInput, opts ...request.Option) (*DescribeVirtualGatewaysOutput, error)

DescribeVirtualGatewaysWithContext is the same as DescribeVirtualGateways with the addition of the ability to pass a context and additional request options.

See DescribeVirtualGateways for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeVirtualInterfaces ¶

func (c *DirectConnect) DescribeVirtualInterfaces(input *DescribeVirtualInterfacesInput) (*DescribeVirtualInterfacesOutput, error)

DescribeVirtualInterfaces API operation for AWS Direct Connect.

Displays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.

A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeVirtualInterfaces for usage and error information.

Returned Error Types:

• ServerException A server-side error occurred.

• ClientException One or more parameters are not valid.

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualInterfaces

func (*DirectConnect) DescribeVirtualInterfacesRequest ¶

func (c *DirectConnect) DescribeVirtualInterfacesRequest(input *DescribeVirtualInterfacesInput) (req *request.Request, output *DescribeVirtualInterfacesOutput)

DescribeVirtualInterfacesRequest generates a "aws/request.Request" representing the client's request for the DescribeVirtualInterfaces operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeVirtualInterfaces for more information on using the DescribeVirtualInterfaces API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeVirtualInterfacesRequest method.
req, resp := client.DescribeVirtualInterfacesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualInterfaces

func (*DirectConnect) DescribeVirtualInterfacesWithContext ¶

func (c *DirectConnect) DescribeVirtualInterfacesWithContext(ctx aws.Context, input *DescribeVirtualInterfacesInput, opts ...request.Option) (*DescribeVirtualInterfacesOutput, error)

DescribeVirtualInterfacesWithContext is the same as DescribeVirtualInterfaces with the addition of the ability to pass a context and additional request options.

See DescribeVirtualInterfaces for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DisassociateConnectionFromLag ¶

func (c *DirectConnect) DisassociateConnectionFromLag(input *DisassociateConnectionFromLagInput) (*Connection, error)