Request Syntax URI Request Parameters Request Body Response Syntax Response Elements Errors See Also

UpdateSiteRackPhysicalProperties

Update the physical and logistical details for a rack at a site. For more information about hardware requirements for racks, see Network readiness checklist in the AWS Outposts User Guide.

To update a rack at a site with an order of IN_PROGRESS, you must wait for the order to complete or cancel the order.

Request Syntax


PATCH /sites/SiteId/rackPhysicalProperties HTTP/1.1
Content-type: application/json

{
   "FiberOpticCableType": "string",
   "MaximumSupportedWeightLbs": "string",
   "OpticalStandard": "string",
   "PowerConnector": "string",
   "PowerDrawKva": "string",
   "PowerFeedDrop": "string",
   "PowerPhase": "string",
   "UplinkCount": "string",
   "UplinkGbps": "string"
}

URI Request Parameters

The request uses the following URI parameters.

SiteId

The ID or the Amazon Resource Name (ARN) of the site.

Note

Despite the parameter name, you can make the request with an ARN. The parameter name is SiteId for backward compatibility.

Length Constraints: Minimum length of 1. Maximum length of 255.

Pattern: ^(arn:aws([a-z-]+)?:outposts:[a-z\d-]+:\d{12}:site/)?(os-[a-f0-9]{17})$

Required: Yes

Request Body

The request accepts the following data in JSON format.

FiberOpticCableType

The type of fiber that you will use to attach the Outpost to your network.

Type: String

Valid Values: SINGLE_MODE | MULTI_MODE

Required: No

MaximumSupportedWeightLbs

The maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

Type: String

Valid Values: NO_LIMIT | MAX_1400_LBS | MAX_1600_LBS | MAX_1800_LBS | MAX_2000_LBS

Required: No

OpticalStandard

The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the AWS Outposts User Guide.

OPTIC_10GBASE_SR: 10GBASE-SR
OPTIC_10GBASE_IR: 10GBASE-IR
OPTIC_10GBASE_LR: 10GBASE-LR
OPTIC_40GBASE_SR: 40GBASE-SR
OPTIC_40GBASE_ESR: 40GBASE-ESR
OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)
OPTIC_40GBASE_LR4: 40GBASE-LR4
OPTIC_100GBASE_SR4: 100GBASE-SR4
OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4
OPTIC_100GBASE_LR4: 100GBASE-LR4
OPTIC_100G_PSM4_MSA: 100G PSM4 MSA
OPTIC_1000BASE_LX: 1000Base-LX
OPTIC_1000BASE_SX : 1000Base-SX

Type: String

Required: No

PowerConnector

The power connector that AWS should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

Single-phase AC feed
- L6-30P – (common in US); 30A; single phase
- IEC309 (blue) – P+N+E, 6hr; 32 A; single phase
Three-phase AC feed
- AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase
- AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

Type: String

Valid Values: L6_30P | IEC309 | AH530P7W | AH532P6W

Required: No

PowerDrawKva

The power draw, in kVA, available at the hardware placement position for the rack.

Type: String

Valid Values: POWER_5_KVA | POWER_10_KVA | POWER_15_KVA | POWER_30_KVA

Required: No

PowerFeedDrop

Indicates whether the power feed comes above or below the rack.

Type: String

Valid Values: ABOVE_RACK | BELOW_RACK

Required: No

PowerPhase

The power option that you can provide for hardware.

Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz
Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

Type: String

Valid Values: SINGLE_PHASE | THREE_PHASE

Required: No

UplinkCount

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

1Gbps - Uplinks available: 1, 2, 4, 6, 8
10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16
40 and 100 Gbps- Uplinks available: 1, 2, 4

Type: String

Required: No

UplinkGbps

The uplink speed the rack should support for the connection to the Region.

Type: String

Valid Values: UPLINK_1G | UPLINK_10G | UPLINK_40G | UPLINK_100G

Required: No

Response Syntax


HTTP/1.1 200
Content-type: application/json

{
   "Site": { 
      "AccountId": "string",
      "Description": "string",
      "Name": "string",
      "Notes": "string",
      "OperatingAddressCity": "string",
      "OperatingAddressCountryCode": "string",
      "OperatingAddressStateOrRegion": "string",
      "RackPhysicalProperties": { 
         "FiberOpticCableType": "string",
         "MaximumSupportedWeightLbs": "string",
         "OpticalStandard": "string",
         "PowerConnector": "string",
         "PowerDrawKva": "string",
         "PowerFeedDrop": "string",
         "PowerPhase": "string",
         "UplinkCount": "string",
         "UplinkGbps": "string"
      },
      "SiteArn": "string",
      "SiteId": "string",
      "Tags": { 
         "string" : "string" 
      }
   }
}

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

Site

Information about a site.

Type: Site object

Errors

For information about the errors that are common to all actions, see Common Errors.

AccessDeniedException

You do not have permission to perform this operation.

HTTP Status Code: 403

ConflictException

Updating or deleting this resource can cause an inconsistent state.

HTTP Status Code: 409

InternalServerException

An internal error has occurred.

HTTP Status Code: 500

NotFoundException

The specified request is not valid.

HTTP Status Code: 404

ValidationException

A parameter is not valid.

HTTP Status Code: 400