You are viewing documentation for version 2 of the AWS SDK for Ruby. Version 3 documentation can be found here.

Class: Aws::SES::Client

Inherits:
Seahorse::Client::Base show all
Defined in:
(unknown)

Overview

An API client for Amazon Simple Email Service. To construct a client, you need to configure a :region and :credentials.

ses = Aws::SES::Client.new(
  region: region_name,
  credentials: credentials,
  # ...
)

See #initialize for a full list of supported configuration options.

Region

You can configure a default region in the following locations:

  • ENV['AWS_REGION']
  • Aws.config[:region]

Go here for a list of supported regions.

Credentials

Default credentials are loaded automatically from the following locations:

  • ENV['AWS_ACCESS_KEY_ID'] and ENV['AWS_SECRET_ACCESS_KEY']
  • Aws.config[:credentials]
  • The shared credentials ini file at ~/.aws/credentials (more information)
  • From an instance profile when running on EC2

You can also construct a credentials object from one of the following classes:

Alternatively, you configure credentials with :access_key_id and :secret_access_key:

# load credentials from disk
creds = YAML.load(File.read('/path/to/secrets'))

Aws::SES::Client.new(
  access_key_id: creds['access_key_id'],
  secret_access_key: creds['secret_access_key']
)

Always load your credentials from outside your application. Avoid configuring credentials statically and never commit them to source control.

Instance Attribute Summary

Attributes inherited from Seahorse::Client::Base

#config, #handlers

Constructor collapse

API Operations collapse

Instance Method Summary collapse

Methods inherited from Seahorse::Client::Base

add_plugin, api, #build_request, clear_plugins, define, new, #operation, #operation_names, plugins, remove_plugin, set_api, set_plugins

Methods included from Seahorse::Client::HandlerBuilder

#handle, #handle_request, #handle_response

Constructor Details

#initialize(options = {}) ⇒ Aws::SES::Client

Constructs an API client.

Options Hash (options):

  • :access_key_id (String)

    Used to set credentials statically. See Plugins::RequestSigner for more details.

  • :convert_params (Boolean) — default: true

    When true, an attempt is made to coerce request parameters into the required types. See Plugins::ParamConverter for more details.

  • :credentials (required, Credentials)

    Your AWS credentials. The following locations will be searched in order for credentials:

    • :access_key_id, :secret_access_key, and :session_token options
    • ENV['AWS_ACCESS_KEY_ID'], ENV['AWS_SECRET_ACCESS_KEY']
    • HOME/.aws/credentials shared credentials file
    • EC2 instance profile credentials See Plugins::RequestSigner for more details.
  • :endpoint (String)

    A default endpoint is constructed from the :region. See Plugins::RegionalEndpoint for more details.

  • :http_continue_timeout (Float) — default: 1

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :http_idle_timeout (Integer) — default: 5

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :http_open_timeout (Integer) — default: 15

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :http_proxy (String)

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :http_read_timeout (Integer) — default: 60

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :http_wire_trace (Boolean) — default: false

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :log_level (Symbol) — default: :info

    The log level to send messages to the logger at. See Plugins::Logging for more details.

  • :log_formatter (Logging::LogFormatter)

    The log formatter. Defaults to Seahorse::Client::Logging::Formatter.default. See Plugins::Logging for more details.

  • :logger (Logger) — default: nil

    The Logger instance to send log messages to. If this option is not set, logging will be disabled. See Plugins::Logging for more details.

  • :profile (String)

    Used when loading credentials from the shared credentials file at HOME/.aws/credentials. When not specified, 'default' is used. See Plugins::RequestSigner for more details.

  • :raise_response_errors (Boolean) — default: true

    When true, response errors are raised. See Seahorse::Client::Plugins::RaiseResponseErrors for more details.

  • :region (required, String)

    The AWS region to connect to. The region is used to construct the client endpoint. Defaults to ENV['AWS_REGION']. Also checks AMAZON_REGION and AWS_DEFAULT_REGION. See Plugins::RegionalEndpoint for more details.

  • :retry_limit (Integer) — default: 3

    The maximum number of times to retry failed requests. Only ~ 500 level server errors and certain ~ 400 level client errors are retried. Generally, these are throttling errors, data checksum errors, networking errors, timeout errors and auth errors from expired credentials. See Plugins::RetryErrors for more details.

  • :secret_access_key (String)

    Used to set credentials statically. See Plugins::RequestSigner for more details.

  • :session_token (String)

    Used to set credentials statically. See Plugins::RequestSigner for more details.

  • :ssl_ca_bundle (String)

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :ssl_ca_directory (String)

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :ssl_ca_store (String)

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :ssl_verify_peer (Boolean) — default: true

    See Seahorse::Client::Plugins::NetHttp for more details.

  • :stub_responses (Boolean) — default: false

    Causes the client to return stubbed responses. By default fake responses are generated and returned. You can specify the response data to return or errors to raise by calling ClientStubs#stub_responses. See ClientStubs for more information.

    Please note When response stubbing is enabled, no HTTP requests are made, and retries are disabled. See Plugins::StubResponses for more details.

  • :validate_params (Boolean) — default: true

    When true, request parameters are validated before sending the request. See Plugins::ParamValidator for more details.

Instance Method Details

#clone_receipt_rule_set(options = {}) ⇒ Struct

Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set.

For information about setting up rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: CloneReceiptRuleSet


# The following example creates a receipt rule set by cloning an existing one:

resp = client.clone_receipt_rule_set({
  original_rule_set_name: "RuleSetToClone", 
  rule_set_name: "RuleSetToCreate", 
})

Request syntax with placeholder values


resp = client.clone_receipt_rule_set({
  rule_set_name: "ReceiptRuleSetName", # required
  original_rule_set_name: "ReceiptRuleSetName", # required
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the rule set to create. The name must:

    • This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).

    • Start and end with a letter or number.

    • Contain less than 64 characters.

  • :original_rule_set_name (required, String)

    The name of the rule set to clone.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_configuration_set(options = {}) ⇒ Struct

Creates a configuration set.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.create_configuration_set({
  configuration_set: { # required
    name: "ConfigurationSetName", # required
  },
})

Options Hash (options):

  • :configuration_set (required, Types::ConfigurationSet)

    A data structure that contains the name of the configuration set.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_configuration_set_event_destination(options = {}) ⇒ Struct

Creates a configuration set event destination.

When you create or update an event destination, you must provide one, and only one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).

An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.create_configuration_set_event_destination({
  configuration_set_name: "ConfigurationSetName", # required
  event_destination: { # required
    name: "EventDestinationName", # required
    enabled: false,
    matching_event_types: ["send"], # required, accepts send, reject, bounce, complaint, delivery, open, click, renderingFailure
    kinesis_firehose_destination: {
      iam_role_arn: "AmazonResourceName", # required
      delivery_stream_arn: "AmazonResourceName", # required
    },
    cloud_watch_destination: {
      dimension_configurations: [ # required
        {
          dimension_name: "DimensionName", # required
          dimension_value_source: "messageTag", # required, accepts messageTag, emailHeader, linkTag
          default_dimension_value: "DefaultDimensionValue", # required
        },
      ],
    },
    sns_destination: {
      topic_arn: "AmazonResourceName", # required
    },
  },
})

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set that the event destination should be associated with.

  • :event_destination (required, Types::EventDestination)

    An object that describes the AWS service that email sending event information will be published to.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_configuration_set_tracking_options(options = {}) ⇒ Struct

Creates an association between a configuration set and a custom domain for open and click event tracking.

By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using configuration sets, see Configuring Custom Domains to Handle Open and Click Tracking in the Amazon SES Developer Guide.

Examples:

Request syntax with placeholder values


resp = client.create_configuration_set_tracking_options({
  configuration_set_name: "ConfigurationSetName", # required
  tracking_options: { # required
    custom_redirect_domain: "CustomRedirectDomain",
  },
})

Options Hash (options):

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_custom_verification_email_template(options = {}) ⇒ Struct

Creates a new custom verification email template.

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.create_custom_verification_email_template({
  template_name: "TemplateName", # required
  from_email_address: "FromAddress", # required
  template_subject: "Subject", # required
  template_content: "TemplateContent", # required
  success_redirection_url: "SuccessRedirectionURL", # required
  failure_redirection_url: "FailureRedirectionURL", # required
})

Options Hash (options):

  • :template_name (required, String)

    The name of the custom verification email template.

  • :from_email_address (required, String)

    The email address that the custom verification email is sent from.

  • :template_subject (required, String)

    The subject line of the custom verification email.

  • :template_content (required, String)

    The content of the custom verification email. The total size of the email must be less than 10 MB. The message body may contain HTML, with some limitations. For more information, see Custom Verification Email Frequently Asked Questions in the Amazon SES Developer Guide.

  • :success_redirection_url (required, String)

    The URL that the recipient of the verification email is sent to if his or her address is successfully verified.

  • :failure_redirection_url (required, String)

    The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_receipt_filter(options = {}) ⇒ Struct

Creates a new IP address filter.

For information about setting up IP address filters, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: CreateReceiptFilter


# The following example creates a new IP address filter:

resp = client.create_receipt_filter({
  filter: {
    ip_filter: {
      cidr: "1.2.3.4/24", 
      policy: "Allow", 
    }, 
    name: "MyFilter", 
  }, 
})

Request syntax with placeholder values


resp = client.create_receipt_filter({
  filter: { # required
    name: "ReceiptFilterName", # required
    ip_filter: { # required
      policy: "Block", # required, accepts Block, Allow
      cidr: "Cidr", # required
    },
  },
})

Options Hash (options):

  • :filter (required, Types::ReceiptFilter)

    A data structure that describes the IP address filter to create, which consists of a name, an IP address range, and whether to allow or block mail from it.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_receipt_rule(options = {}) ⇒ Struct

Creates a receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: CreateReceiptRule


# The following example creates a new receipt rule:

resp = client.create_receipt_rule({
  after: "", 
  rule: {
    actions: [
      {
        s3_action: {
          bucket_name: "MyBucket", 
          object_key_prefix: "email", 
        }, 
      }, 
    ], 
    enabled: true, 
    name: "MyRule", 
    scan_enabled: true, 
    tls_policy: "Optional", 
  }, 
  rule_set_name: "MyRuleSet", 
})

Request syntax with placeholder values


resp = client.create_receipt_rule({
  rule_set_name: "ReceiptRuleSetName", # required
  after: "ReceiptRuleName",
  rule: { # required
    name: "ReceiptRuleName", # required
    enabled: false,
    tls_policy: "Require", # accepts Require, Optional
    recipients: ["Recipient"],
    actions: [
      {
        s3_action: {
          topic_arn: "AmazonResourceName",
          bucket_name: "S3BucketName", # required
          object_key_prefix: "S3KeyPrefix",
          kms_key_arn: "AmazonResourceName",
        },
        bounce_action: {
          topic_arn: "AmazonResourceName",
          smtp_reply_code: "BounceSmtpReplyCode", # required
          status_code: "BounceStatusCode",
          message: "BounceMessage", # required
          sender: "Address", # required
        },
        workmail_action: {
          topic_arn: "AmazonResourceName",
          organization_arn: "AmazonResourceName", # required
        },
        lambda_action: {
          topic_arn: "AmazonResourceName",
          function_arn: "AmazonResourceName", # required
          invocation_type: "Event", # accepts Event, RequestResponse
        },
        stop_action: {
          scope: "RuleSet", # required, accepts RuleSet
          topic_arn: "AmazonResourceName",
        },
        add_header_action: {
          header_name: "HeaderName", # required
          header_value: "HeaderValue", # required
        },
        sns_action: {
          topic_arn: "AmazonResourceName", # required
          encoding: "UTF-8", # accepts UTF-8, Base64
        },
      },
    ],
    scan_enabled: false,
  },
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the rule set that the receipt rule will be added to.

  • :after (String)

    The name of an existing rule after which the new rule will be placed. If this parameter is null, the new rule will be inserted at the beginning of the rule list.

  • :rule (required, Types::ReceiptRule)

    A data structure that contains the specified rule\'s name, actions, recipients, domains, enabled status, scan status, and TLS policy.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_receipt_rule_set(options = {}) ⇒ Struct

Creates an empty receipt rule set.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: CreateReceiptRuleSet


# The following example creates an empty receipt rule set:

resp = client.create_receipt_rule_set({
  rule_set_name: "MyRuleSet", 
})

Request syntax with placeholder values


resp = client.create_receipt_rule_set({
  rule_set_name: "ReceiptRuleSetName", # required
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the rule set to create. The name must:

    • This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).

    • Start and end with a letter or number.

    • Contain less than 64 characters.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#create_template(options = {}) ⇒ Struct

Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.create_template({
  template: { # required
    template_name: "TemplateName", # required
    subject_part: "SubjectPart",
    text_part: "TextPart",
    html_part: "HtmlPart",
  },
})

Options Hash (options):

  • :template (required, Types::Template)

    The content of the email, composed of a subject line, an HTML part, and a text-only part.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_configuration_set(options = {}) ⇒ Struct

Deletes a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.delete_configuration_set({
  configuration_set_name: "ConfigurationSetName", # required
})

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set to delete.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_configuration_set_event_destination(options = {}) ⇒ Struct

Deletes a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.delete_configuration_set_event_destination({
  configuration_set_name: "ConfigurationSetName", # required
  event_destination_name: "EventDestinationName", # required
})

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set from which to delete the event destination.

  • :event_destination_name (required, String)

    The name of the event destination to delete.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_configuration_set_tracking_options(options = {}) ⇒ Struct

Deletes an association between a configuration set and a custom domain for open and click event tracking.

By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using configuration sets, see Configuring Custom Domains to Handle Open and Click Tracking in the Amazon SES Developer Guide.

Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains.

Examples:

Request syntax with placeholder values


resp = client.delete_configuration_set_tracking_options({
  configuration_set_name: "ConfigurationSetName", # required
})

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set from which you want to delete the tracking options.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_custom_verification_email_template(options = {}) ⇒ Struct

Deletes an existing custom verification email template.

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.delete_custom_verification_email_template({
  template_name: "TemplateName", # required
})

Options Hash (options):

  • :template_name (required, String)

    The name of the custom verification email template that you want to delete.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_identity(options = {}) ⇒ Struct

Deletes the specified identity (an email address or a domain) from the list of verified identities.

You can execute this operation no more than once per second.

Examples:

Example: DeleteIdentity


# The following example deletes an identity from the list of identities that have been submitted for verification with Amazon SES:

resp = client.delete_identity({
  identity: "user@example.com", 
})

Request syntax with placeholder values


resp = client.delete_identity({
  identity: "Identity", # required
})

Options Hash (options):

  • :identity (required, String)

    The identity to be removed from the list of identities for the AWS Account.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_identity_policy(options = {}) ⇒ Struct

Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: DeleteIdentityPolicy


# The following example deletes a sending authorization policy for an identity:

resp = client.delete_identity_policy({
  identity: "user@example.com", 
  policy_name: "MyPolicy", 
})

Request syntax with placeholder values


resp = client.delete_identity_policy({
  identity: "Identity", # required
  policy_name: "PolicyName", # required
})

Options Hash (options):

  • :identity (required, String)

    The identity that is associated with the policy that you want to delete. You can specify the identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

    To successfully call this API, you must own the identity.

  • :policy_name (required, String)

    The name of the policy to be deleted.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_receipt_filter(options = {}) ⇒ Struct

Deletes the specified IP address filter.

For information about managing IP address filters, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: DeleteReceiptFilter


# The following example deletes an IP address filter:

resp = client.delete_receipt_filter({
  filter_name: "MyFilter", 
})

Request syntax with placeholder values


resp = client.delete_receipt_filter({
  filter_name: "ReceiptFilterName", # required
})

Options Hash (options):

  • :filter_name (required, String)

    The name of the IP address filter to delete.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_receipt_rule(options = {}) ⇒ Struct

Deletes the specified receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: DeleteReceiptRule


# The following example deletes a receipt rule:

resp = client.delete_receipt_rule({
  rule_name: "MyRule", 
  rule_set_name: "MyRuleSet", 
})

Request syntax with placeholder values


resp = client.delete_receipt_rule({
  rule_set_name: "ReceiptRuleSetName", # required
  rule_name: "ReceiptRuleName", # required
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the receipt rule set that contains the receipt rule to delete.

  • :rule_name (required, String)

    The name of the receipt rule to delete.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_receipt_rule_set(options = {}) ⇒ Struct

Deletes the specified receipt rule set and all of the receipt rules it contains.

The currently active rule set cannot be deleted.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: DeleteReceiptRuleSet


# The following example deletes a receipt rule set:

resp = client.delete_receipt_rule_set({
  rule_set_name: "MyRuleSet", 
})

Request syntax with placeholder values


resp = client.delete_receipt_rule_set({
  rule_set_name: "ReceiptRuleSetName", # required
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the receipt rule set to delete.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_template(options = {}) ⇒ Struct

Deletes an email template.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.delete_template({
  template_name: "TemplateName", # required
})

Options Hash (options):

  • :template_name (required, String)

    The name of the template to be deleted.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#delete_verified_email_address(options = {}) ⇒ Struct

Deprecated. Use the DeleteIdentity operation to delete email addresses and domains.

Examples:

Example: DeleteVerifiedEmailAddress


# The following example deletes an email address from the list of identities that have been submitted for verification with Amazon SES:

resp = client.delete_verified_email_address({
  email_address: "user@example.com", 
})

Request syntax with placeholder values


resp = client.delete_verified_email_address({
  email_address: "Address", # required
})

Options Hash (options):

  • :email_address (required, String)

    An email address to be removed from the list of verified addresses.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#describe_active_receipt_rule_set(options = {}) ⇒ Types::DescribeActiveReceiptRuleSetResponse

Returns the metadata and receipt rules for the receipt rule set that is currently active.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: DescribeActiveReceiptRuleSet


# The following example returns the metadata and receipt rules for the receipt rule set that is currently active:

resp = client.describe_active_receipt_rule_set({
})

# resp.to_h outputs the following:
{
  metadata: {
    created_timestamp: Time.parse("2016-07-15T16:25:59.607Z"), 
    name: "default-rule-set", 
  }, 
  rules: [
    {
      actions: [
        {
          s3_action: {
            bucket_name: "MyBucket", 
            object_key_prefix: "email", 
          }, 
        }, 
      ], 
      enabled: true, 
      name: "MyRule", 
      scan_enabled: true, 
      tls_policy: "Optional", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.describe_active_receipt_rule_set()

Response structure


resp..name #=> String
resp..created_timestamp #=> Time
resp.rules #=> Array
resp.rules[0].name #=> String
resp.rules[0].enabled #=> true/false
resp.rules[0].tls_policy #=> String, one of "Require", "Optional"
resp.rules[0].recipients #=> Array
resp.rules[0].recipients[0] #=> String
resp.rules[0].actions #=> Array
resp.rules[0].actions[0].s3_action.topic_arn #=> String
resp.rules[0].actions[0].s3_action.bucket_name #=> String
resp.rules[0].actions[0].s3_action.object_key_prefix #=> String
resp.rules[0].actions[0].s3_action.kms_key_arn #=> String
resp.rules[0].actions[0].bounce_action.topic_arn #=> String
resp.rules[0].actions[0].bounce_action.smtp_reply_code #=> String
resp.rules[0].actions[0].bounce_action.status_code #=> String
resp.rules[0].actions[0].bounce_action.message #=> String
resp.rules[0].actions[0].bounce_action.sender #=> String
resp.rules[0].actions[0].workmail_action.topic_arn #=> String
resp.rules[0].actions[0].workmail_action.organization_arn #=> String
resp.rules[0].actions[0].lambda_action.topic_arn #=> String
resp.rules[0].actions[0].lambda_action.function_arn #=> String
resp.rules[0].actions[0].lambda_action.invocation_type #=> String, one of "Event", "RequestResponse"
resp.rules[0].actions[0].stop_action.scope #=> String, one of "RuleSet"
resp.rules[0].actions[0].stop_action.topic_arn #=> String
resp.rules[0].actions[0].add_header_action.header_name #=> String
resp.rules[0].actions[0].add_header_action.header_value #=> String
resp.rules[0].actions[0].sns_action.topic_arn #=> String
resp.rules[0].actions[0].sns_action.encoding #=> String, one of "UTF-8", "Base64"
resp.rules[0].scan_enabled #=> true/false

Returns:

See Also:

#describe_configuration_set(options = {}) ⇒ Types::DescribeConfigurationSetResponse

Returns the details of the specified configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.describe_configuration_set({
  configuration_set_name: "ConfigurationSetName", # required
  configuration_set_attribute_names: ["eventDestinations"], # accepts eventDestinations, trackingOptions, reputationOptions
})

Response structure


resp.configuration_set.name #=> String
resp.event_destinations #=> Array
resp.event_destinations[0].name #=> String
resp.event_destinations[0].enabled #=> true/false
resp.event_destinations[0].matching_event_types #=> Array
resp.event_destinations[0].matching_event_types[0] #=> String, one of "send", "reject", "bounce", "complaint", "delivery", "open", "click", "renderingFailure"
resp.event_destinations[0].kinesis_firehose_destination.iam_role_arn #=> String
resp.event_destinations[0].kinesis_firehose_destination.delivery_stream_arn #=> String
resp.event_destinations[0].cloud_watch_destination.dimension_configurations #=> Array
resp.event_destinations[0].cloud_watch_destination.dimension_configurations[0].dimension_name #=> String
resp.event_destinations[0].cloud_watch_destination.dimension_configurations[0].dimension_value_source #=> String, one of "messageTag", "emailHeader", "linkTag"
resp.event_destinations[0].cloud_watch_destination.dimension_configurations[0].default_dimension_value #=> String
resp.event_destinations[0].sns_destination.topic_arn #=> String
resp.tracking_options.custom_redirect_domain #=> String
resp.reputation_options.sending_enabled #=> true/false
resp.reputation_options.reputation_metrics_enabled #=> true/false
resp.reputation_options.last_fresh_start #=> Time

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set to describe.

  • :configuration_set_attribute_names (Array<String>)

    A list of configuration set attributes to return.

Returns:

See Also:

#describe_receipt_rule(options = {}) ⇒ Types::DescribeReceiptRuleResponse

Returns the details of the specified receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: DescribeReceiptRule


# The following example returns the details of a receipt rule:

resp = client.describe_receipt_rule({
  rule_name: "MyRule", 
  rule_set_name: "MyRuleSet", 
})

# resp.to_h outputs the following:
{
  rule: {
    actions: [
      {
        s3_action: {
          bucket_name: "MyBucket", 
          object_key_prefix: "email", 
        }, 
      }, 
    ], 
    enabled: true, 
    name: "MyRule", 
    scan_enabled: true, 
    tls_policy: "Optional", 
  }, 
}

Request syntax with placeholder values


resp = client.describe_receipt_rule({
  rule_set_name: "ReceiptRuleSetName", # required
  rule_name: "ReceiptRuleName", # required
})

Response structure


resp.rule.name #=> String
resp.rule.enabled #=> true/false
resp.rule.tls_policy #=> String, one of "Require", "Optional"
resp.rule.recipients #=> Array
resp.rule.recipients[0] #=> String
resp.rule.actions #=> Array
resp.rule.actions[0].s3_action.topic_arn #=> String
resp.rule.actions[0].s3_action.bucket_name #=> String
resp.rule.actions[0].s3_action.object_key_prefix #=> String
resp.rule.actions[0].s3_action.kms_key_arn #=> String
resp.rule.actions[0].bounce_action.topic_arn #=> String
resp.rule.actions[0].bounce_action.smtp_reply_code #=> String
resp.rule.actions[0].bounce_action.status_code #=> String
resp.rule.actions[0].bounce_action.message #=> String
resp.rule.actions[0].bounce_action.sender #=> String
resp.rule.actions[0].workmail_action.topic_arn #=> String
resp.rule.actions[0].workmail_action.organization_arn #=> String
resp.rule.actions[0].lambda_action.topic_arn #=> String
resp.rule.actions[0].lambda_action.function_arn #=> String
resp.rule.actions[0].lambda_action.invocation_type #=> String, one of "Event", "RequestResponse"
resp.rule.actions[0].stop_action.scope #=> String, one of "RuleSet"
resp.rule.actions[0].stop_action.topic_arn #=> String
resp.rule.actions[0].add_header_action.header_name #=> String
resp.rule.actions[0].add_header_action.header_value #=> String
resp.rule.actions[0].sns_action.topic_arn #=> String
resp.rule.actions[0].sns_action.encoding #=> String, one of "UTF-8", "Base64"
resp.rule.scan_enabled #=> true/false

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the receipt rule set that the receipt rule belongs to.

  • :rule_name (required, String)

    The name of the receipt rule.

Returns:

See Also:

#describe_receipt_rule_set(options = {}) ⇒ Types::DescribeReceiptRuleSetResponse

Returns the details of the specified receipt rule set.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: DescribeReceiptRuleSet


# The following example returns the metadata and receipt rules of a receipt rule set:

resp = client.describe_receipt_rule_set({
  rule_set_name: "MyRuleSet", 
})

# resp.to_h outputs the following:
{
  metadata: {
    created_timestamp: Time.parse("2016-07-15T16:25:59.607Z"), 
    name: "MyRuleSet", 
  }, 
  rules: [
    {
      actions: [
        {
          s3_action: {
            bucket_name: "MyBucket", 
            object_key_prefix: "email", 
          }, 
        }, 
      ], 
      enabled: true, 
      name: "MyRule", 
      scan_enabled: true, 
      tls_policy: "Optional", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.describe_receipt_rule_set({
  rule_set_name: "ReceiptRuleSetName", # required
})

Response structure


resp..name #=> String
resp..created_timestamp #=> Time
resp.rules #=> Array
resp.rules[0].name #=> String
resp.rules[0].enabled #=> true/false
resp.rules[0].tls_policy #=> String, one of "Require", "Optional"
resp.rules[0].recipients #=> Array
resp.rules[0].recipients[0] #=> String
resp.rules[0].actions #=> Array
resp.rules[0].actions[0].s3_action.topic_arn #=> String
resp.rules[0].actions[0].s3_action.bucket_name #=> String
resp.rules[0].actions[0].s3_action.object_key_prefix #=> String
resp.rules[0].actions[0].s3_action.kms_key_arn #=> String
resp.rules[0].actions[0].bounce_action.topic_arn #=> String
resp.rules[0].actions[0].bounce_action.smtp_reply_code #=> String
resp.rules[0].actions[0].bounce_action.status_code #=> String
resp.rules[0].actions[0].bounce_action.message #=> String
resp.rules[0].actions[0].bounce_action.sender #=> String
resp.rules[0].actions[0].workmail_action.topic_arn #=> String
resp.rules[0].actions[0].workmail_action.organization_arn #=> String
resp.rules[0].actions[0].lambda_action.topic_arn #=> String
resp.rules[0].actions[0].lambda_action.function_arn #=> String
resp.rules[0].actions[0].lambda_action.invocation_type #=> String, one of "Event", "RequestResponse"
resp.rules[0].actions[0].stop_action.scope #=> String, one of "RuleSet"
resp.rules[0].actions[0].stop_action.topic_arn #=> String
resp.rules[0].actions[0].add_header_action.header_name #=> String
resp.rules[0].actions[0].add_header_action.header_value #=> String
resp.rules[0].actions[0].sns_action.topic_arn #=> String
resp.rules[0].actions[0].sns_action.encoding #=> String, one of "UTF-8", "Base64"
resp.rules[0].scan_enabled #=> true/false

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the receipt rule set to describe.

Returns:

See Also:

#get_account_sending_enabled(options = {}) ⇒ Types::GetAccountSendingEnabledResponse

Returns the email sending status of the Amazon SES account.

You can execute this operation no more than once per second.

Examples:

Example: GetAccountSendingEnabled


# The following example returns if sending status for an account is enabled. (true / false):

resp = client.({
})

# resp.to_h outputs the following:
{
  enabled: true, 
}

Request syntax with placeholder values


resp = client.()

Response structure


resp.enabled #=> true/false

Returns:

See Also:

#get_custom_verification_email_template(options = {}) ⇒ Types::GetCustomVerificationEmailTemplateResponse

Returns the custom email verification template for the template name you specify.

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.get_custom_verification_email_template({
  template_name: "TemplateName", # required
})

Response structure


resp.template_name #=> String
resp.from_email_address #=> String
resp.template_subject #=> String
resp.template_content #=> String
resp.success_redirection_url #=> String
resp.failure_redirection_url #=> String

Options Hash (options):

  • :template_name (required, String)

    The name of the custom verification email template that you want to retrieve.

Returns:

See Also:

#get_identity_dkim_attributes(options = {}) ⇒ Types::GetIdentityDkimAttributesResponse

Returns the current status of Easy DKIM signing for an entity. For domain name identities, this operation also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published.

This operation takes a list of identities as input and returns the following information for each:

  • Whether Easy DKIM signing is enabled or disabled.

  • A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.

  • Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.

This operation is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Examples:

Example: GetIdentityDkimAttributes


# The following example retrieves the Amazon SES Easy DKIM attributes for a list of identities:

resp = client.get_identity_dkim_attributes({
  identities: [
    "example.com", 
    "user@example.com", 
  ], 
})

# resp.to_h outputs the following:
{
  dkim_attributes: {
    "example.com" => {
      dkim_enabled: true, 
      dkim_tokens: [
        "EXAMPLEjcs5xoyqytjsotsijas7236gr", 
        "EXAMPLEjr76cvoc6mysspnioorxsn6ep", 
        "EXAMPLEkbmkqkhlm2lyz77ppkulerm4k", 
      ], 
      dkim_verification_status: "Success", 
    }, 
    "user@example.com" => {
      dkim_enabled: false, 
      dkim_verification_status: "NotStarted", 
    }, 
  }, 
}

Request syntax with placeholder values


resp = client.get_identity_dkim_attributes({
  identities: ["Identity"], # required
})

Response structure


resp.dkim_attributes #=> Hash
resp.dkim_attributes["Identity"].dkim_enabled #=> true/false
resp.dkim_attributes["Identity"].dkim_verification_status #=> String, one of "Pending", "Success", "Failed", "TemporaryFailure", "NotStarted"
resp.dkim_attributes["Identity"].dkim_tokens #=> Array
resp.dkim_attributes["Identity"].dkim_tokens[0] #=> String

Options Hash (options):

  • :identities (required, Array<String>)

    A list of one or more verified identities - email addresses, domains, or both.

Returns:

See Also:

#get_identity_mail_from_domain_attributes(options = {}) ⇒ Types::GetIdentityMailFromDomainAttributesResponse

Returns the custom MAIL FROM attributes for a list of identities (email addresses : domains).

This operation is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.

Examples:

Example: GetIdentityMailFromDomainAttributes


# The following example returns the custom MAIL FROM attributes for an identity:

resp = client.get_identity_mail_from_domain_attributes({
  identities: [
    "example.com", 
  ], 
})

# resp.to_h outputs the following:
{
  mail_from_domain_attributes: {
    "example.com" => {
      behavior_on_mx_failure: "UseDefaultValue", 
      mail_from_domain: "bounces.example.com", 
      mail_from_domain_status: "Success", 
    }, 
  }, 
}

Request syntax with placeholder values


resp = client.get_identity_mail_from_domain_attributes({
  identities: ["Identity"], # required
})

Response structure


resp.mail_from_domain_attributes #=> Hash
resp.mail_from_domain_attributes["Identity"].mail_from_domain #=> String
resp.mail_from_domain_attributes["Identity"].mail_from_domain_status #=> String, one of "Pending", "Success", "Failed", "TemporaryFailure"
resp.mail_from_domain_attributes["Identity"].behavior_on_mx_failure #=> String, one of "UseDefaultValue", "RejectMessage"

Options Hash (options):

  • :identities (required, Array<String>)

    A list of one or more identities.

Returns:

See Also:

#get_identity_notification_attributes(options = {}) ⇒ Types::GetIdentityNotificationAttributesResponse

Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes.

This operation is throttled at one request per second and can only get notification attributes for up to 100 identities at a time.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Examples:

Example: GetIdentityNotificationAttributes


# The following example returns the notification attributes for an identity:

resp = client.get_identity_notification_attributes({
  identities: [
    "example.com", 
  ], 
})

# resp.to_h outputs the following:
{
  notification_attributes: {
    "example.com" => {
      bounce_topic: "arn:aws:sns:us-east-1:EXAMPLE65304:ExampleTopic", 
      complaint_topic: "arn:aws:sns:us-east-1:EXAMPLE65304:ExampleTopic", 
      delivery_topic: "arn:aws:sns:us-east-1:EXAMPLE65304:ExampleTopic", 
      forwarding_enabled: true, 
      headers_in_bounce_notifications_enabled: false, 
      headers_in_complaint_notifications_enabled: false, 
      headers_in_delivery_notifications_enabled: false, 
    }, 
  }, 
}

Request syntax with placeholder values


resp = client.get_identity_notification_attributes({
  identities: ["Identity"], # required
})

Response structure


resp.notification_attributes #=> Hash
resp.notification_attributes["Identity"].bounce_topic #=> String
resp.notification_attributes["Identity"].complaint_topic #=> String
resp.notification_attributes["Identity"].delivery_topic #=> String
resp.notification_attributes["Identity"].forwarding_enabled #=> true/false
resp.notification_attributes["Identity"].headers_in_bounce_notifications_enabled #=> true/false
resp.notification_attributes["Identity"].headers_in_complaint_notifications_enabled #=> true/false
resp.notification_attributes["Identity"].headers_in_delivery_notifications_enabled #=> true/false

Options Hash (options):

  • :identities (required, Array<String>)

    A list of one or more identities. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

Returns:

See Also:

#get_identity_policies(options = {}) ⇒ Types::GetIdentityPoliciesResponse

Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: GetIdentityPolicies


# The following example returns a sending authorization policy for an identity:

resp = client.get_identity_policies({
  identity: "example.com", 
  policy_names: [
    "MyPolicy", 
  ], 
})

# resp.to_h outputs the following:
{
  policies: {
    "MyPolicy" => "{\"Version\":\"2008-10-17\",\"Statement\":[{\"Sid\":\"stmt1469123904194\",\"Effect\":\"Allow\",\"Principal\":{\"AWS\":\"arn:aws:iam::123456789012:root\"},\"Action\":[\"ses:SendEmail\",\"ses:SendRawEmail\"],\"Resource\":\"arn:aws:ses:us-east-1:EXAMPLE65304:identity/example.com\"}]}", 
  }, 
}

Request syntax with placeholder values


resp = client.get_identity_policies({
  identity: "Identity", # required
  policy_names: ["PolicyName"], # required
})

Response structure


resp.policies #=> Hash
resp.policies["PolicyName"] #=> String

Options Hash (options):

  • :identity (required, String)

    The identity for which the policies will be retrieved. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

    To successfully call this API, you must own the identity.

  • :policy_names (required, Array<String>)

    A list of the names of policies to be retrieved. You can retrieve a maximum of 20 policies at a time. If you do not know the names of the policies that are attached to the identity, you can use ListIdentityPolicies.

Returns:

See Also:

#get_identity_verification_attributes(options = {}) ⇒ Types::GetIdentityVerificationAttributesResponse

Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity.

The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning.

For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning.

This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.

Examples:

Example: GetIdentityVerificationAttributes


# The following example returns the verification status and the verification token for a domain identity:

resp = client.get_identity_verification_attributes({
  identities: [
    "example.com", 
  ], 
})

# resp.to_h outputs the following:
{
  verification_attributes: {
    "example.com" => {
      verification_status: "Success", 
      verification_token: "EXAMPLE3VYb9EDI2nTOQRi/Tf6MI/6bD6THIGiP1MVY=", 
    }, 
  }, 
}

Request syntax with placeholder values


resp = client.get_identity_verification_attributes({
  identities: ["Identity"], # required
})

Response structure


resp.verification_attributes #=> Hash
resp.verification_attributes["Identity"].verification_status #=> String, one of "Pending", "Success", "Failed", "TemporaryFailure", "NotStarted"
resp.verification_attributes["Identity"].verification_token #=> String

Options Hash (options):

  • :identities (required, Array<String>)

    A list of identities.

Returns:

See Also:

#get_send_quota(options = {}) ⇒ Types::GetSendQuotaResponse

Provides the sending limits for the Amazon SES account.

You can execute this operation no more than once per second.

Examples:

Example: GetSendQuota


# The following example returns the Amazon SES sending limits for an AWS account:

resp = client.get_send_quota({
})

# resp.to_h outputs the following:
{
  max_24_hour_send: 200, 
  max_send_rate: 1, 
  sent_last_24_hours: 1, 
}

Request syntax with placeholder values


resp = client.get_send_quota()

Response structure


resp.max_24_hour_send #=> Float
resp.max_send_rate #=> Float
resp.sent_last_24_hours #=> Float

Returns:

See Also:

#get_send_statistics(options = {}) ⇒ Types::GetSendStatisticsResponse

Provides sending statistics for the Amazon SES account. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time.

You can execute this operation no more than once per second.

Examples:

Example: GetSendStatistics


# The following example returns Amazon SES sending statistics:

resp = client.get_send_statistics({
})

# resp.to_h outputs the following:
{
  send_data_points: [
    {
      bounces: 0, 
      complaints: 0, 
      delivery_attempts: 5, 
      rejects: 0, 
      timestamp: Time.parse("2016-07-13T22:43:00Z"), 
    }, 
    {
      bounces: 0, 
      complaints: 0, 
      delivery_attempts: 3, 
      rejects: 0, 
      timestamp: Time.parse("2016-07-13T23:13:00Z"), 
    }, 
    {
      bounces: 0, 
      complaints: 0, 
      delivery_attempts: 1, 
      rejects: 0, 
      timestamp: Time.parse("2016-07-13T21:13:00Z"), 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.get_send_statistics()

Response structure


resp.send_data_points #=> Array
resp.send_data_points[0].timestamp #=> Time
resp.send_data_points[0].delivery_attempts #=> Integer
resp.send_data_points[0].bounces #=> Integer
resp.send_data_points[0].complaints #=> Integer
resp.send_data_points[0].rejects #=> Integer

Returns:

See Also:

#get_template(options = {}) ⇒ Types::GetTemplateResponse

Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.get_template({
  template_name: "TemplateName", # required
})

Response structure


resp.template.template_name #=> String
resp.template.subject_part #=> String
resp.template.text_part #=> String
resp.template.html_part #=> String

Options Hash (options):

  • :template_name (required, String)

    The name of the template you want to retrieve.

Returns:

See Also:

#list_configuration_sets(options = {}) ⇒ Types::ListConfigurationSetsResponse

Provides a list of the configuration sets associated with your Amazon SES account. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.

You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.

Examples:

Request syntax with placeholder values


resp = client.list_configuration_sets({
  next_token: "NextToken",
  max_items: 1,
})

Response structure


resp.configuration_sets #=> Array
resp.configuration_sets[0].name #=> String
resp.next_token #=> String

Options Hash (options):

  • :next_token (String)

    A token returned from a previous call to ListConfigurationSets to indicate the position of the configuration set in the configuration set list.

  • :max_items (Integer)

    The number of configuration sets to return.

Returns:

See Also:

#list_custom_verification_email_templates(options = {}) ⇒ Types::ListCustomVerificationEmailTemplatesResponse

Lists the existing custom verification email templates for your account.

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.list_custom_verification_email_templates({
  next_token: "NextToken",
  max_results: 1,
})

Response structure


resp.custom_verification_email_templates #=> Array
resp.custom_verification_email_templates[0].template_name #=> String
resp.custom_verification_email_templates[0].from_email_address #=> String
resp.custom_verification_email_templates[0].template_subject #=> String
resp.custom_verification_email_templates[0].success_redirection_url #=> String
resp.custom_verification_email_templates[0].failure_redirection_url #=> String
resp.next_token #=> String

Options Hash (options):

  • :next_token (String)

    An array the contains the name and creation time stamp for each template in your Amazon SES account.

  • :max_results (Integer)

    The maximum number of custom verification email templates to return. This value must be at least 1 and less than or equal to 50. If you do not specify a value, or if you specify a value less than 1 or greater than 50, the operation will return up to 50 results.

Returns:

See Also:

#list_identities(options = {}) ⇒ Types::ListIdentitiesResponse

Returns a list containing all of the identities (email addresses and domains) for your AWS account, regardless of verification status.

You can execute this operation no more than once per second.

Examples:

Example: ListIdentities


# The following example lists the email address identities that have been submitted for verification with Amazon SES:

resp = client.list_identities({
  identity_type: "EmailAddress", 
  max_items: 123, 
  next_token: "", 
})

# resp.to_h outputs the following:
{
  identities: [
    "user@example.com", 
  ], 
  next_token: "", 
}

Request syntax with placeholder values


resp = client.list_identities({
  identity_type: "EmailAddress", # accepts EmailAddress, Domain
  next_token: "NextToken",
  max_items: 1,
})

Response structure


resp.identities #=> Array
resp.identities[0] #=> String
resp.next_token #=> String

Options Hash (options):

  • :identity_type (String)

    The type of the identities to list. Possible values are \"EmailAddress\" and \"Domain\". If this parameter is omitted, then all identities will be listed.

  • :next_token (String)

    The token to use for pagination.

  • :max_items (Integer)

    The maximum number of identities per page. Possible values are 1-1000 inclusive.

Returns:

See Also:

#list_identity_policies(options = {}) ⇒ Types::ListIdentityPoliciesResponse

Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: ListIdentityPolicies


# The following example returns a list of sending authorization policies that are attached to an identity:

resp = client.list_identity_policies({
  identity: "example.com", 
})

# resp.to_h outputs the following:
{
  policy_names: [
    "MyPolicy", 
  ], 
}

Request syntax with placeholder values


resp = client.list_identity_policies({
  identity: "Identity", # required
})

Response structure


resp.policy_names #=> Array
resp.policy_names[0] #=> String

Options Hash (options):

  • :identity (required, String)

    The identity that is associated with the policy for which the policies will be listed. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

    To successfully call this API, you must own the identity.

Returns:

See Also:

#list_receipt_filters(options = {}) ⇒ Types::ListReceiptFiltersResponse

Lists the IP address filters associated with your AWS account.

For information about managing IP address filters, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: ListReceiptFilters


# The following example lists the IP address filters that are associated with an AWS account:

resp = client.list_receipt_filters({
})

# resp.to_h outputs the following:
{
  filters: [
    {
      ip_filter: {
        cidr: "1.2.3.4/24", 
        policy: "Block", 
      }, 
      name: "MyFilter", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_receipt_filters()

Response structure


resp.filters #=> Array
resp.filters[0].name #=> String
resp.filters[0].ip_filter.policy #=> String, one of "Block", "Allow"
resp.filters[0].ip_filter.cidr #=> String

Returns:

See Also:

#list_receipt_rule_sets(options = {}) ⇒ Types::ListReceiptRuleSetsResponse

Lists the receipt rule sets that exist under your AWS account. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: ListReceiptRuleSets


# The following example lists the receipt rule sets that exist under an AWS account:

resp = client.list_receipt_rule_sets({
  next_token: "", 
})

# resp.to_h outputs the following:
{
  next_token: "", 
  rule_sets: [
    {
      created_timestamp: Time.parse("2016-07-15T16:25:59.607Z"), 
      name: "MyRuleSet", 
    }, 
  ], 
}

Request syntax with placeholder values


resp = client.list_receipt_rule_sets({
  next_token: "NextToken",
})

Response structure


resp.rule_sets #=> Array
resp.rule_sets[0].name #=> String
resp.rule_sets[0].created_timestamp #=> Time
resp.next_token #=> String

Options Hash (options):

  • :next_token (String)

    A token returned from a previous call to ListReceiptRuleSets to indicate the position in the receipt rule set list.

Returns:

See Also:

#list_templates(options = {}) ⇒ Types::ListTemplatesResponse

Lists the email templates present in your Amazon SES account.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.list_templates({
  next_token: "NextToken",
  max_items: 1,
})

Response structure


resp. #=> Array
resp.[0].name #=> String
resp.[0].created_timestamp #=> Time
resp.next_token #=> String

Options Hash (options):

  • :next_token (String)

    A token returned from a previous call to ListTemplates to indicate the position in the list of email templates.

  • :max_items (Integer)

    The maximum number of templates to return. This value must be at least 1 and less than or equal to 10. If you do not specify a value, or if you specify a value less than 1 or greater than 10, the operation will return up to 10 results.

Returns:

See Also:

#list_verified_email_addresses(options = {}) ⇒ Types::ListVerifiedEmailAddressesResponse

Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.

Examples:

Example: ListVerifiedEmailAddresses


# The following example lists all email addresses that have been submitted for verification with Amazon SES:

resp = client.list_verified_email_addresses({
})

# resp.to_h outputs the following:
{
  verified_email_addresses: [
    "user1@example.com", 
    "user2@example.com", 
  ], 
}

Request syntax with placeholder values


resp = client.list_verified_email_addresses()

Response structure


resp.verified_email_addresses #=> Array
resp.verified_email_addresses[0] #=> String

Returns:

See Also:

#put_identity_policy(options = {}) ⇒ Struct

Adds or updates a sending authorization policy for the specified identity (an email address or a domain).

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: PutIdentityPolicy


# The following example adds a sending authorization policy to an identity:

resp = client.put_identity_policy({
  identity: "example.com", 
  policy: "{\"Version\":\"2008-10-17\",\"Statement\":[{\"Sid\":\"stmt1469123904194\",\"Effect\":\"Allow\",\"Principal\":{\"AWS\":\"arn:aws:iam::123456789012:root\"},\"Action\":[\"ses:SendEmail\",\"ses:SendRawEmail\"],\"Resource\":\"arn:aws:ses:us-east-1:EXAMPLE65304:identity/example.com\"}]}", 
  policy_name: "MyPolicy", 
})

Request syntax with placeholder values


resp = client.put_identity_policy({
  identity: "Identity", # required
  policy_name: "PolicyName", # required
  policy: "Policy", # required
})

Options Hash (options):

  • :identity (required, String)

    The identity that the policy will apply to. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

    To successfully call this API, you must own the identity.

  • :policy_name (required, String)

    The name of the policy.

    The policy name cannot exceed 64 characters and can only include alphanumeric characters, dashes, and underscores.

  • :policy (required, String)

    The text of the policy in JSON format. The policy cannot exceed 4 KB.

    For information about the syntax of sending authorization policies, see the Amazon SES Developer Guide.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#reorder_receipt_rule_set(options = {}) ⇒ Struct

Reorders the receipt rules within a receipt rule set.

All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: ReorderReceiptRuleSet


# The following example reorders the receipt rules within a receipt rule set:

resp = client.reorder_receipt_rule_set({
  rule_names: [
    "MyRule", 
    "MyOtherRule", 
  ], 
  rule_set_name: "MyRuleSet", 
})

Request syntax with placeholder values


resp = client.reorder_receipt_rule_set({
  rule_set_name: "ReceiptRuleSetName", # required
  rule_names: ["ReceiptRuleName"], # required
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the receipt rule set to reorder.

  • :rule_names (required, Array<String>)

    A list of the specified receipt rule set\'s receipt rules in the order that you want to put them.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#send_bounce(options = {}) ⇒ Types::SendBounceResponse

Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.

You cannot use this API to send generic bounces for mail that was not received by Amazon SES.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.send_bounce({
  original_message_id: "MessageId", # required
  bounce_sender: "Address", # required
  explanation: "Explanation",
  message_dsn: {
    reporting_mta: "ReportingMta", # required
    arrival_date: Time.now,
    extension_fields: [
      {
        name: "ExtensionFieldName", # required
        value: "ExtensionFieldValue", # required
      },
    ],
  },
  bounced_recipient_info_list: [ # required
    {
      recipient: "Address", # required
      recipient_arn: "AmazonResourceName",
      bounce_type: "DoesNotExist", # accepts DoesNotExist, MessageTooLarge, ExceededQuota, ContentRejected, Undefined, TemporaryFailure
      recipient_dsn_fields: {
        final_recipient: "Address",
        action: "failed", # required, accepts failed, delayed, delivered, relayed, expanded
        remote_mta: "RemoteMta",
        status: "DsnStatus", # required
        diagnostic_code: "DiagnosticCode",
        last_attempt_date: Time.now,
        extension_fields: [
          {
            name: "ExtensionFieldName", # required
            value: "ExtensionFieldValue", # required
          },
        ],
      },
    },
  ],
  bounce_sender_arn: "AmazonResourceName",
})

Response structure


resp.message_id #=> String

Options Hash (options):

  • :original_message_id (required, String)

    The message ID of the message to be bounced.

  • :bounce_sender (required, String)

    The address to use in the \"From\" header of the bounce message. This must be an identity that you have verified with Amazon SES.

  • :explanation (String)

    Human-readable text for the bounce message to explain the failure. If not specified, the text will be auto-generated based on the bounced recipient information.

  • :message_dsn (Types::MessageDsn)

    Message-related DSN fields. If not specified, Amazon SES will choose the values.

  • :bounced_recipient_info_list (required, Array<Types::BouncedRecipientInfo>)

    A list of recipients of the bounced message, including the information required to create the Delivery Status Notifications (DSNs) for the recipients. You must specify at least one BouncedRecipientInfo in the list.

  • :bounce_sender_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the address in the \"From\" header of the bounce. For more information about sending authorization, see the Amazon SES Developer Guide.

Returns:

See Also:

#send_bulk_templated_email(options = {}) ⇒ Types::SendBulkTemplatedEmailResponse

Composes an email message to multiple destinations. The message body is created using an email template.

In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements:

  • The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.

  • The message must be sent from a verified email address or domain.

  • If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.

  • The total size of the message, including attachments, must be less than 10 MB.

  • Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.

Examples:

Request syntax with placeholder values


resp = client.send_bulk_templated_email({
  source: "Address", # required
  source_arn: "AmazonResourceName",
  reply_to_addresses: ["Address"],
  return_path: "Address",
  return_path_arn: "AmazonResourceName",
  configuration_set_name: "ConfigurationSetName",
  default_tags: [
    {
      name: "MessageTagName", # required
      value: "MessageTagValue", # required
    },
  ],
  template: "TemplateName", # required
  template_arn: "AmazonResourceName",
  default_template_data: "TemplateData",
  destinations: [ # required
    {
      destination: { # required
        to_addresses: ["Address"],
        cc_addresses: ["Address"],
        bcc_addresses: ["Address"],
      },
      replacement_tags: [
        {
          name: "MessageTagName", # required
          value: "MessageTagValue", # required
        },
      ],
      replacement_template_data: "TemplateData",
    },
  ],
})

Response structure


resp.status #=> Array
resp.status[0].status #=> String, one of "Success", "MessageRejected", "MailFromDomainNotVerified", "ConfigurationSetDoesNotExist", "TemplateDoesNotExist", "AccountSuspended", "AccountThrottled", "AccountDailyQuotaExceeded", "InvalidSendingPoolName", "AccountSendingPaused", "ConfigurationSetSendingPaused", "InvalidParameterValue", "TransientFailure", "Failed"
resp.status[0].error #=> String
resp.status[0].message_id #=> String

Options Hash (options):

  • :source (required, String)

    The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.

    If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

    Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.

  • :source_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.

    For more information about sending authorization, see the Amazon SES Developer Guide.

  • :reply_to_addresses (Array<String>)

    The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.

  • :return_path (String)

    The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient\'s ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

  • :return_path_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.

    For more information about sending authorization, see the Amazon SES Developer Guide.

  • :configuration_set_name (String)

    The name of the configuration set to use when you send an email using SendBulkTemplatedEmail.

  • :default_tags (Array<Types::MessageTag>)

    A list of tags, in the form of name/value pairs, to apply to an email that you send to a destination using SendBulkTemplatedEmail.

  • :template (required, String)

    The template to use when sending this email.

  • :template_arn (String)

    The ARN of the template to use when sending this email.

  • :default_template_data (String)

    A list of replacement values to apply to the template when replacement data is not specified in a Destination object. These values act as a default or fallback option when no other data is available.

    The template data is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

  • :destinations (required, Array<Types::BulkEmailDestination>)

    One or more Destination objects. All of the recipients in a Destination will receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array.

Returns:

See Also:

#send_custom_verification_email(options = {}) ⇒ Types::SendCustomVerificationEmailResponse

Adds an email address to the list of identities for your Amazon SES account and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address.

To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.send_custom_verification_email({
  email_address: "Address", # required
  template_name: "TemplateName", # required
  configuration_set_name: "ConfigurationSetName",
})

Response structure


resp.message_id #=> String

Options Hash (options):

  • :email_address (required, String)

    The email address to verify.

  • :template_name (required, String)

    The name of the custom verification email template to use when sending the verification email.

  • :configuration_set_name (String)

    Name of a configuration set to use when sending the verification email.

Returns:

See Also:

#send_email(options = {}) ⇒ Types::SendEmailResponse

Composes an email message and immediately queues it for sending. In order to send email using the SendEmail operation, your message must meet the following requirements:

  • The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error.

  • If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.

  • The total size of the message, including attachments, must be smaller than 10 MB.

  • The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.

  • The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.

For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.

Examples:

Example: SendEmail


# The following example sends a formatted email:

resp = client.send_email({
  destination: {
    bcc_addresses: [
    ], 
    cc_addresses: [
      "recipient3@example.com", 
    ], 
    to_addresses: [
      "recipient1@example.com", 
      "recipient2@example.com", 
    ], 
  }, 
  message: {
    body: {
      html: {
        charset: "UTF-8", 
        data: "This message body contains HTML formatting. It can, for example, contain links like this one: <a class=\"ulink\" href=\"http://docs.aws.amazon.com/ses/latest/DeveloperGuide\" target=\"_blank\">Amazon SES Developer Guide</a>.", 
      }, 
      text: {
        charset: "UTF-8", 
        data: "This is the message body in text format.", 
      }, 
    }, 
    subject: {
      charset: "UTF-8", 
      data: "Test email", 
    }, 
  }, 
  reply_to_addresses: [
  ], 
  return_path: "", 
  return_path_arn: "", 
  source: "sender@example.com", 
  source_arn: "", 
})

# resp.to_h outputs the following:
{
  message_id: "EXAMPLE78603177f-7a5433e7-8edb-42ae-af10-f0181f34d6ee-000000", 
}

Request syntax with placeholder values


resp = client.send_email({
  source: "Address", # required
  destination: { # required
    to_addresses: ["Address"],
    cc_addresses: ["Address"],
    bcc_addresses: ["Address"],
  },
  message: { # required
    subject: { # required
      data: "MessageData", # required
      charset: "Charset",
    },
    body: { # required
      text: {
        data: "MessageData", # required
        charset: "Charset",
      },
      html: {
        data: "MessageData", # required
        charset: "Charset",
      },
    },
  },
  reply_to_addresses: ["Address"],
  return_path: "Address",
  source_arn: "AmazonResourceName",
  return_path_arn: "AmazonResourceName",
  tags: [
    {
      name: "MessageTagName", # required
      value: "MessageTagValue", # required
    },
  ],
  configuration_set_name: "ConfigurationSetName",
})

Response structure


resp.message_id #=> String

Options Hash (options):

  • :source (required, String)

    The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.

    If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

    Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.

  • :destination (required, Types::Destination)

    The destination for this email, composed of To:, CC:, and BCC: fields.

  • :message (required, Types::Message)

    The message to be sent.

  • :reply_to_addresses (Array<String>)

    The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.

  • :return_path (String)

    The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient\'s ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

  • :source_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.

    For more information about sending authorization, see the Amazon SES Developer Guide.

  • :return_path_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.

    For more information about sending authorization, see the Amazon SES Developer Guide.

  • :tags (Array<Types::MessageTag>)

    A list of tags, in the form of name/value pairs, to apply to an email that you send using SendEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

  • :configuration_set_name (String)

    The name of the configuration set to use when you send an email using SendEmail.

Returns:

See Also:

#send_raw_email(options = {}) ⇒ Types::SendRawEmailResponse

Composes an email message and immediately queues it for sending. When calling this operation, you may specify the message headers as well as the content. The SendRawEmail operation is particularly useful for sending multipart MIME emails (such as those that contain both a plain-text and an HTML version).

In order to send email using the SendRawEmail operation, your message must meet the following requirements:

  • The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error.

  • If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.

  • The total size of the message, including attachments, must be smaller than 10 MB.

  • The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.

  • The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendRawEmail operation several times to send the message to each group.

For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.

Additionally, keep the following considerations in mind when using the SendRawEmail operation:

  • Although you can customize the message headers when using the SendRawEmail operation, Amazon SES will automatically apply its own Message-ID and Date headers; if you passed these headers when creating the message, they will be overwritten by the values that Amazon SES provides.

  • If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:

    • X-SES-SOURCE-ARN

    • X-SES-FROM-ARN

    • X-SES-RETURN-PATH-ARN

    Do not include these X-headers in the DKIM signature; Amazon SES will remove them before sending the email.

    For most common sending authorization scenarios, we recommend that you specify the SourceIdentityArn parameter and not the FromIdentityArn or ReturnPathIdentityArn parameters. If you only specify the SourceIdentityArn parameter, Amazon SES will set the From and Return Path addresses to the identity specified in SourceIdentityArn. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide.

Examples:

Example: SendRawEmail


# The following example sends an email with an attachment:

resp = client.send_raw_email({
  destinations: [
  ], 
  from_arn: "", 
  raw_message: {
    data: "From: sender@example.com\\nTo: recipient@example.com\\nSubject: Test email (contains an attachment)\\nMIME-Version: 1.0\\nContent-type: Multipart/Mixed; boundary=\"NextPart\"\\n\\n--NextPart\\nContent-Type: text/plain\\n\\nThis is the message body.\\n\\n--NextPart\\nContent-Type: text/plain;\\nContent-Disposition: attachment; filename=\"attachment.txt\"\\n\\nThis is the text in the attachment.\\n\\n--NextPart--", 
  }, 
  return_path_arn: "", 
  source: "", 
  source_arn: "", 
})

# resp.to_h outputs the following:
{
  message_id: "EXAMPLEf3f73d99b-c63fb06f-d263-41f8-a0fb-d0dc67d56c07-000000", 
}

Request syntax with placeholder values


resp = client.send_raw_email({
  source: "Address",
  destinations: ["Address"],
  raw_message: { # required
    data: "data", # required
  },
  from_arn: "AmazonResourceName",
  source_arn: "AmazonResourceName",
  return_path_arn: "AmazonResourceName",
  tags: [
    {
      name: "MessageTagName", # required
      value: "MessageTagValue", # required
    },
  ],
  configuration_set_name: "ConfigurationSetName",
})

Response structure


resp.message_id #=> String

Options Hash (options):

  • :source (String)

    The identity\'s email address. If you do not provide a value for this parameter, you must specify a \"From\" address in the raw text of the message. (You can also specify both.)

    Amazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.

    If you specify the Source parameter and have feedback forwarding enabled, then bounces and complaints will be sent to this email address. This takes precedence over any Return-Path header that you might include in the raw text of the message.

  • :destinations (Array<String>)

    A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.

  • :raw_message (required, Types::RawMessage)

    The raw text of the message. The client is responsible for ensuring the following:

    • Message must contain a header and a body, separated by a blank line.

    • All required header fields must be present.

    • Each part of a multipart MIME message must be formatted properly.

    • MIME content types must be among those supported by Amazon SES. For more information, go to the Amazon SES Developer Guide.

    • Must be base64-encoded.

    • Per RFC 5321, the maximum length of each line of text, including the <CRLF>, must not exceed 1,000 characters.

  • :from_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to specify a particular \"From\" address in the header of the raw email.

    Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message of the email. If you use both the FromArn parameter and the corresponding X-header, Amazon SES uses the value of the FromArn parameter.

    For information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.

  • :source_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.

    Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message of the email. If you use both the SourceArn parameter and the corresponding X-header, Amazon SES uses the value of the SourceArn parameter.

    For information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.

  • :return_path_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.

    Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw message of the email. If you use both the ReturnPathArn parameter and the corresponding X-header, Amazon SES uses the value of the ReturnPathArn parameter.

    For information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.

  • :tags (Array<Types::MessageTag>)

    A list of tags, in the form of name/value pairs, to apply to an email that you send using SendRawEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

  • :configuration_set_name (String)

    The name of the configuration set to use when you send an email using SendRawEmail.

Returns:

See Also:

#send_templated_email(options = {}) ⇒ Types::SendTemplatedEmailResponse

Composes an email message using an email template and immediately queues it for sending.

In order to send email using the SendTemplatedEmail operation, your call to the API must meet the following requirements:

  • The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.

  • The message must be sent from a verified email address or domain.

  • If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.

  • The total size of the message, including attachments, must be less than 10 MB.

  • Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients who will receive the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.

  • The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.

Examples:

Request syntax with placeholder values


resp = client.send_templated_email({
  source: "Address", # required
  destination: { # required
    to_addresses: ["Address"],
    cc_addresses: ["Address"],
    bcc_addresses: ["Address"],
  },
  reply_to_addresses: ["Address"],
  return_path: "Address",
  source_arn: "AmazonResourceName",
  return_path_arn: "AmazonResourceName",
  tags: [
    {
      name: "MessageTagName", # required
      value: "MessageTagValue", # required
    },
  ],
  configuration_set_name: "ConfigurationSetName",
  template: "TemplateName", # required
  template_arn: "AmazonResourceName",
  template_data: "TemplateData", # required
})

Response structure


resp.message_id #=> String

Options Hash (options):

  • :source (required, String)

    The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.

    If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

    Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described inRFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.

  • :destination (required, Types::Destination)

    The destination for this email, composed of To:, CC:, and BCC: fields. A Destination can include up to 50 recipients across these three fields.

  • :reply_to_addresses (Array<String>)

    The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.

  • :return_path (String)

    The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient\'s ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

  • :source_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.

    For more information about sending authorization, see the Amazon SES Developer Guide.

  • :return_path_arn (String)

    This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

    For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.

    For more information about sending authorization, see the Amazon SES Developer Guide.

  • :tags (Array<Types::MessageTag>)

    A list of tags, in the form of name/value pairs, to apply to an email that you send using SendTemplatedEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

  • :configuration_set_name (String)

    The name of the configuration set to use when you send an email using SendTemplatedEmail.

  • :template (required, String)

    The template to use when sending this email.

  • :template_arn (String)

    The ARN of the template to use when sending this email.

  • :template_data (required, String)

    A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

Returns:

See Also:

#set_active_receipt_rule_set(options = {}) ⇒ Struct

Sets the specified receipt rule set as the active receipt rule set.

To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: SetActiveReceiptRuleSet


# The following example sets the active receipt rule set:

resp = client.set_active_receipt_rule_set({
  rule_set_name: "RuleSetToActivate", 
})

Request syntax with placeholder values


resp = client.set_active_receipt_rule_set({
  rule_set_name: "ReceiptRuleSetName",
})

Options Hash (options):

  • :rule_set_name (String)

    The name of the receipt rule set to make active. Setting this value to null disables all email receiving.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#set_identity_dkim_enabled(options = {}) ⇒ Struct

Enables or disables Easy DKIM signing of email sent from an identity:

  • If Easy DKIM signing is enabled for a domain name identity (such as example.com), then Amazon SES will DKIM-sign all email sent by addresses under that domain name (for example, user@example.com).

  • If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.

For email addresses (for example, user@example.com), you can only enable Easy DKIM signing if the corresponding domain (in this case, example.com) has been set up for Easy DKIM using the AWS Console or the VerifyDomainDkim operation.

You can execute this operation no more than once per second.

For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.

Examples:

Example: SetIdentityDkimEnabled


# The following example configures Amazon SES to Easy DKIM-sign the email sent from an identity:

resp = client.set_identity_dkim_enabled({
  dkim_enabled: true, 
  identity: "user@example.com", 
})

Request syntax with placeholder values


resp = client.set_identity_dkim_enabled({
  identity: "Identity", # required
  dkim_enabled: false, # required
})

Options Hash (options):

  • :identity (required, String)

    The identity for which DKIM signing should be enabled or disabled.

  • :dkim_enabled (required, Boolean)

    Sets whether DKIM signing is enabled for an identity. Set to true to enable DKIM signing for this identity; false to disable it.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#set_identity_feedback_forwarding_enabled(options = {}) ⇒ Struct

Given an identity (an email address or a domain), enables or disables whether Amazon SES forwards bounce and complaint notifications as email. Feedback forwarding can only be disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and complaints.

Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS.

You can execute this operation no more than once per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Examples:

Example: SetIdentityFeedbackForwardingEnabled


# The following example configures Amazon SES to forward an identity's bounces and complaints via email:

resp = client.set_identity_feedback_forwarding_enabled({
  forwarding_enabled: true, 
  identity: "user@example.com", 
})

Request syntax with placeholder values


resp = client.set_identity_feedback_forwarding_enabled({
  identity: "Identity", # required
  forwarding_enabled: false, # required
})

Options Hash (options):

  • :identity (required, String)

    The identity for which to set bounce and complaint notification forwarding. Examples: user@example.com, example.com.

  • :forwarding_enabled (required, Boolean)

    Sets whether Amazon SES will forward bounce and complaint notifications as email. true specifies that Amazon SES will forward bounce and complaint notifications as email, in addition to any Amazon SNS topic publishing otherwise specified. false specifies that Amazon SES will publish bounce and complaint notifications only through Amazon SNS. This value can only be set to false when Amazon SNS topics are set for both Bounce and Complaint notification types.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#set_identity_headers_in_notifications_enabled(options = {}) ⇒ Struct

Given an identity (an email address or a domain), sets whether Amazon SES includes the original email headers in the Amazon Simple Notification Service (Amazon SNS) notifications of a specified type.

You can execute this operation no more than once per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Examples:

Example: SetIdentityHeadersInNotificationsEnabled


# The following example configures Amazon SES to include the original email headers in the Amazon SNS bounce notifications for an identity:

resp = client.set_identity_headers_in_notifications_enabled({
  enabled: true, 
  identity: "user@example.com", 
  notification_type: "Bounce", 
})

Request syntax with placeholder values


resp = client.set_identity_headers_in_notifications_enabled({
  identity: "Identity", # required
  notification_type: "Bounce", # required, accepts Bounce, Complaint, Delivery
  enabled: false, # required
})

Options Hash (options):

  • :identity (required, String)

    The identity for which to enable or disable headers in notifications. Examples: user@example.com, example.com.

  • :notification_type (required, String)

    The notification type for which to enable or disable headers in notifications.

  • :enabled (required, Boolean)

    Sets whether Amazon SES includes the original email headers in Amazon SNS notifications of the specified notification type. A value of true specifies that Amazon SES will include headers in notifications, and a value of false specifies that Amazon SES will not include headers in notifications.

    This value can only be set when NotificationType is already set to use a particular Amazon SNS topic.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#set_identity_mail_from_domain(options = {}) ⇒ Struct

Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).

To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: SetIdentityMailFromDomain


# The following example configures Amazon SES to use a custom MAIL FROM domain for an identity:

resp = client.set_identity_mail_from_domain({
  behavior_on_mx_failure: "UseDefaultValue", 
  identity: "user@example.com", 
  mail_from_domain: "bounces.example.com", 
})

Request syntax with placeholder values


resp = client.set_identity_mail_from_domain({
  identity: "Identity", # required
  mail_from_domain: "MailFromDomainName",
  behavior_on_mx_failure: "UseDefaultValue", # accepts UseDefaultValue, RejectMessage
})

Options Hash (options):

  • :identity (required, String)

    The verified identity for which you want to enable or disable the specified custom MAIL FROM domain.

  • :mail_from_domain (String)

    The custom MAIL FROM domain that you want the verified identity to use. The MAIL FROM domain must 1) be a subdomain of the verified identity, 2) not be used in a \"From\" address if the MAIL FROM domain is the destination of email feedback forwarding (for more information, see the Amazon SES Developer Guide), and 3) not be used to receive emails. A value of null disables the custom MAIL FROM setting for the identity.

  • :behavior_on_mx_failure (String)

    The action that you want Amazon SES to take if it cannot successfully read the required MX record when you send an email. If you choose UseDefaultValue, Amazon SES will use amazonses.com (or a subdomain of that) as the MAIL FROM domain. If you choose RejectMessage, Amazon SES will return a MailFromDomainNotVerified error and not send the email.

    The action specified in BehaviorOnMXFailure is taken when the custom MAIL FROM domain setup is in the Pending, Failed, and TemporaryFailure states.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#set_identity_notification_topic(options = {}) ⇒ Struct

Given an identity (an email address or a domain), sets the Amazon Simple Notification Service (Amazon SNS) topic to which Amazon SES will publish bounce, complaint, and/or delivery notifications for emails sent with that identity as the Source.

Unless feedback forwarding is enabled, you must specify Amazon SNS topics for bounce and complaint notifications. For more information, see SetIdentityFeedbackForwardingEnabled.

You can execute this operation no more than once per second.

For more information about feedback notification, see the Amazon SES Developer Guide.

Examples:

Example: SetIdentityNotificationTopic


# The following example sets the Amazon SNS topic to which Amazon SES will publish bounce, complaint, and/or delivery notifications for emails sent with the specified identity as the Source:

resp = client.set_identity_notification_topic({
  identity: "user@example.com", 
  notification_type: "Bounce", 
  sns_topic: "arn:aws:sns:us-west-2:111122223333:MyTopic", 
})

Request syntax with placeholder values


resp = client.set_identity_notification_topic({
  identity: "Identity", # required
  notification_type: "Bounce", # required, accepts Bounce, Complaint, Delivery
  sns_topic: "NotificationTopic",
})

Options Hash (options):

  • :identity (required, String)

    The identity for which the Amazon SNS topic will be set. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

  • :notification_type (required, String)

    The type of notifications that will be published to the specified Amazon SNS topic.

  • :sns_topic (String)

    The Amazon Resource Name (ARN) of the Amazon SNS topic. If the parameter is omitted from the request or a null value is passed, SnsTopic is cleared and publishing is disabled.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#set_receipt_rule_position(options = {}) ⇒ Struct

Sets the position of the specified receipt rule in the receipt rule set.

For information about managing receipt rules, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: SetReceiptRulePosition


# The following example sets the position of a receipt rule in a receipt rule set:

resp = client.set_receipt_rule_position({
  after: "PutRuleAfterThisRule", 
  rule_name: "RuleToReposition", 
  rule_set_name: "MyRuleSet", 
})

Request syntax with placeholder values


resp = client.set_receipt_rule_position({
  rule_set_name: "ReceiptRuleSetName", # required
  rule_name: "ReceiptRuleName", # required
  after: "ReceiptRuleName",
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the receipt rule set that contains the receipt rule to reposition.

  • :rule_name (required, String)

    The name of the receipt rule to reposition.

  • :after (String)

    The name of the receipt rule after which to place the specified receipt rule.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#test_render_template(options = {}) ⇒ Types::TestRenderTemplateResponse

Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.test_render_template({
  template_name: "TemplateName", # required
  template_data: "TemplateData", # required
})

Response structure


resp.rendered_template #=> String

Options Hash (options):

  • :template_name (required, String)

    The name of the template that you want to render.

  • :template_data (required, String)

    A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

Returns:

See Also:

#update_account_sending_enabled(options = {}) ⇒ Struct

Enables or disables email sending across your entire Amazon SES account. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account when reputation metrics (such as your bounce on complaint rate) reach certain thresholds.

You can execute this operation no more than once per second.

Examples:

Example: UpdateAccountSendingEnabled


# The following example updated the sending status for this account.

resp = client.({
  enabled: true, 
})

Request syntax with placeholder values


resp = client.({
  enabled: false,
})

Options Hash (options):

  • :enabled (Boolean)

    Describes whether email sending is enabled or disabled for your Amazon SES account.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#update_configuration_set_event_destination(options = {}) ⇒ Struct

Updates the event destination of a configuration set. Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide.

When you create or update an event destination, you must provide one, and only one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.update_configuration_set_event_destination({
  configuration_set_name: "ConfigurationSetName", # required
  event_destination: { # required
    name: "EventDestinationName", # required
    enabled: false,
    matching_event_types: ["send"], # required, accepts send, reject, bounce, complaint, delivery, open, click, renderingFailure
    kinesis_firehose_destination: {
      iam_role_arn: "AmazonResourceName", # required
      delivery_stream_arn: "AmazonResourceName", # required
    },
    cloud_watch_destination: {
      dimension_configurations: [ # required
        {
          dimension_name: "DimensionName", # required
          dimension_value_source: "messageTag", # required, accepts messageTag, emailHeader, linkTag
          default_dimension_value: "DefaultDimensionValue", # required
        },
      ],
    },
    sns_destination: {
      topic_arn: "AmazonResourceName", # required
    },
  },
})

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set that contains the event destination that you want to update.

  • :event_destination (required, Types::EventDestination)

    The event destination object that you want to apply to the specified configuration set.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#update_configuration_set_reputation_metrics_enabled(options = {}) ⇒ Struct

Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using Amazon CloudWatch, you can create alarms when bounce or complaint rates exceed a certain threshold.

You can execute this operation no more than once per second.

Examples:

Example: UpdateConfigurationSetReputationMetricsEnabled


# Set the reputationMetricsEnabled flag for a specific configuration set.

resp = client.update_configuration_set_reputation_metrics_enabled({
  configuration_set_name: "foo", 
  enabled: true, 
})

Request syntax with placeholder values


resp = client.update_configuration_set_reputation_metrics_enabled({
  configuration_set_name: "ConfigurationSetName", # required
  enabled: false, # required
})

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set that you want to update.

  • :enabled (required, Boolean)

    Describes whether or not Amazon SES will publish reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#update_configuration_set_sending_enabled(options = {}) ⇒ Struct

Enables or disables email sending for messages sent using a specific configuration set. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) reach certain thresholds.

You can execute this operation no more than once per second.

Examples:

Example: UpdateConfigurationSetReputationMetricsEnabled


# Set the sending enabled flag for a specific configuration set.

resp = client.update_configuration_set_sending_enabled({
  configuration_set_name: "foo", 
  enabled: true, 
})

Request syntax with placeholder values


resp = client.update_configuration_set_sending_enabled({
  configuration_set_name: "ConfigurationSetName", # required
  enabled: false, # required
})

Options Hash (options):

  • :configuration_set_name (required, String)

    The name of the configuration set that you want to update.

  • :enabled (required, Boolean)

    Describes whether email sending is enabled or disabled for the configuration set.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#update_configuration_set_tracking_options(options = {}) ⇒ Struct

Modifies an association between a configuration set and a custom domain for open and click event tracking.

By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using configuration sets, see Configuring Custom Domains to Handle Open and Click Tracking in the Amazon SES Developer Guide.

Examples:

Request syntax with placeholder values


resp = client.update_configuration_set_tracking_options({
  configuration_set_name: "ConfigurationSetName", # required
  tracking_options: { # required
    custom_redirect_domain: "CustomRedirectDomain",
  },
})

Options Hash (options):

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#update_custom_verification_email_template(options = {}) ⇒ Struct

Updates an existing custom verification email template.

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.update_custom_verification_email_template({
  template_name: "TemplateName", # required
  from_email_address: "FromAddress",
  template_subject: "Subject",
  template_content: "TemplateContent",
  success_redirection_url: "SuccessRedirectionURL",
  failure_redirection_url: "FailureRedirectionURL",
})

Options Hash (options):

  • :template_name (required, String)

    The name of the custom verification email template that you want to update.

  • :from_email_address (String)

    The email address that the custom verification email is sent from.

  • :template_subject (String)

    The subject line of the custom verification email.

  • :template_content (String)

    The content of the custom verification email. The total size of the email must be less than 10 MB. The message body may contain HTML, with some limitations. For more information, see Custom Verification Email Frequently Asked Questions in the Amazon SES Developer Guide.

  • :success_redirection_url (String)

    The URL that the recipient of the verification email is sent to if his or her address is successfully verified.

  • :failure_redirection_url (String)

    The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#update_receipt_rule(options = {}) ⇒ Struct

Updates a receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: UpdateReceiptRule


# The following example updates a receipt rule to use an Amazon S3 action:

resp = client.update_receipt_rule({
  rule: {
    actions: [
      {
        s3_action: {
          bucket_name: "MyBucket", 
          object_key_prefix: "email", 
        }, 
      }, 
    ], 
    enabled: true, 
    name: "MyRule", 
    scan_enabled: true, 
    tls_policy: "Optional", 
  }, 
  rule_set_name: "MyRuleSet", 
})

Request syntax with placeholder values


resp = client.update_receipt_rule({
  rule_set_name: "ReceiptRuleSetName", # required
  rule: { # required
    name: "ReceiptRuleName", # required
    enabled: false,
    tls_policy: "Require", # accepts Require, Optional
    recipients: ["Recipient"],
    actions: [
      {
        s3_action: {
          topic_arn: "AmazonResourceName",
          bucket_name: "S3BucketName", # required
          object_key_prefix: "S3KeyPrefix",
          kms_key_arn: "AmazonResourceName",
        },
        bounce_action: {
          topic_arn: "AmazonResourceName",
          smtp_reply_code: "BounceSmtpReplyCode", # required
          status_code: "BounceStatusCode",
          message: "BounceMessage", # required
          sender: "Address", # required
        },
        workmail_action: {
          topic_arn: "AmazonResourceName",
          organization_arn: "AmazonResourceName", # required
        },
        lambda_action: {
          topic_arn: "AmazonResourceName",
          function_arn: "AmazonResourceName", # required
          invocation_type: "Event", # accepts Event, RequestResponse
        },
        stop_action: {
          scope: "RuleSet", # required, accepts RuleSet
          topic_arn: "AmazonResourceName",
        },
        add_header_action: {
          header_name: "HeaderName", # required
          header_value: "HeaderValue", # required
        },
        sns_action: {
          topic_arn: "AmazonResourceName", # required
          encoding: "UTF-8", # accepts UTF-8, Base64
        },
      },
    ],
    scan_enabled: false,
  },
})

Options Hash (options):

  • :rule_set_name (required, String)

    The name of the receipt rule set that the receipt rule belongs to.

  • :rule (required, Types::ReceiptRule)

    A data structure that contains the updated receipt rule information.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#update_template(options = {}) ⇒ Struct

Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Request syntax with placeholder values


resp = client.update_template({
  template: { # required
    template_name: "TemplateName", # required
    subject_part: "SubjectPart",
    text_part: "TextPart",
    html_part: "HtmlPart",
  },
})

Options Hash (options):

  • :template (required, Types::Template)

    The content of the email, composed of a subject line, an HTML part, and a text-only part.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#verify_domain_dkim(options = {}) ⇒ Types::VerifyDomainDkimResponse

Returns a set of DKIM tokens for a domain. DKIM tokens are character strings that represent your domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain.

You can execute this operation no more than once per second.

To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled operation.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Examples:

Example: VerifyDomainDkim


# The following example generates DKIM tokens for a domain that has been verified with Amazon SES:

resp = client.verify_domain_dkim({
  domain: "example.com", 
})

# resp.to_h outputs the following:
{
  dkim_tokens: [
    "EXAMPLEq76owjnks3lnluwg65scbemvw", 
    "EXAMPLEi3dnsj67hstzaj673klariwx2", 
    "EXAMPLEwfbtcukvimehexktmdtaz6naj", 
  ], 
}

Request syntax with placeholder values


resp = client.verify_domain_dkim({
  domain: "Domain", # required
})

Response structure


resp.dkim_tokens #=> Array
resp.dkim_tokens[0] #=> String

Options Hash (options):

  • :domain (required, String)

    The name of the domain to be verified for Easy DKIM signing.

Returns:

See Also:

#verify_domain_identity(options = {}) ⇒ Types::VerifyDomainIdentityResponse

Adds a domain to the list of identities for your Amazon SES account and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Examples:

Example: VerifyDomainIdentity


# The following example starts the domain verification process with Amazon SES:

resp = client.verify_domain_identity({
  domain: "example.com", 
})

# resp.to_h outputs the following:
{
  verification_token: "eoEmxw+YaYhb3h3iVJHuXMJXqeu1q1/wwmvjuEXAMPLE", 
}

Request syntax with placeholder values


resp = client.verify_domain_identity({
  domain: "Domain", # required
})

Response structure


resp.verification_token #=> String

Options Hash (options):

  • :domain (required, String)

    The domain to be verified.

Returns:

See Also:

#verify_email_address(options = {}) ⇒ Struct

Deprecated. Use the VerifyEmailIdentity operation to verify a new email address.

Examples:

Example: VerifyEmailAddress


# The following example starts the email address verification process with Amazon SES:

resp = client.verify_email_address({
  email_address: "user@example.com", 
})

Request syntax with placeholder values


resp = client.verify_email_address({
  email_address: "Address", # required
})

Options Hash (options):

  • :email_address (required, String)

    The email address to be verified.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#verify_email_identity(options = {}) ⇒ Struct

Adds an email address to the list of identities for your Amazon SES account and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address.

You can execute this operation no more than once per second.

Examples:

Example: VerifyEmailIdentity


# The following example starts the email address verification process with Amazon SES:

resp = client.verify_email_identity({
  email_address: "user@example.com", 
})

Request syntax with placeholder values


resp = client.verify_email_identity({
  email_address: "Address", # required
})

Options Hash (options):

  • :email_address (required, String)

    The email address to be verified.

Returns:

  • (Struct)

    Returns an empty response.

See Also:

#wait_until(waiter_name, params = {}) {|waiter| ... } ⇒ Boolean

Waiters polls an API operation until a resource enters a desired state.

Basic Usage

Waiters will poll until they are succesful, they fail by entering a terminal state, or until a maximum number of attempts are made.

# polls in a loop, sleeping between attempts client.waiter_until(waiter_name, params)

Configuration

You can configure the maximum number of polling attempts, and the delay (in seconds) between each polling attempt. You configure waiters by passing a block to #wait_until:

# poll for ~25 seconds
client.wait_until(...) do |w|
  w.max_attempts = 5
  w.delay = 5
end

Callbacks

You can be notified before each polling attempt and before each delay. If you throw :success or :failure from these callbacks, it will terminate the waiter.

started_at = Time.now
client.wait_until(...) do |w|

  # disable max attempts
  w.max_attempts = nil

  # poll for 1 hour, instead of a number of attempts
  w.before_wait do |attempts, response|
    throw :failure if Time.now - started_at > 3600
  end

end

Handling Errors

When a waiter is successful, it returns true. When a waiter fails, it raises an error. All errors raised extend from Waiters::Errors::WaiterFailed.

begin
  client.wait_until(...)
rescue Aws::Waiters::Errors::WaiterFailed
  # resource did not enter the desired state in time
end

Parameters:

  • waiter_name (Symbol)

    The name of the waiter. See #waiter_names for a full list of supported waiters.

  • params (Hash) (defaults to: {})

    Additional request parameters. See the #waiter_names for a list of supported waiters and what request they call. The called request determines the list of accepted parameters.

Yield Parameters:

Returns:

  • (Boolean)

    Returns true if the waiter was successful.

Raises:

  • (Errors::FailureStateError)

    Raised when the waiter terminates because the waiter has entered a state that it will not transition out of, preventing success.

  • (Errors::TooManyAttemptsError)

    Raised when the configured maximum number of attempts have been made, and the waiter is not yet successful.

  • (Errors::UnexpectedError)

    Raised when an error is encounted while polling for a resource that is not expected.

  • (Errors::NoSuchWaiterError)

    Raised when you request to wait for an unknown state.

#waiter_namesArray<Symbol>

Returns the list of supported waiters. The following table lists the supported waiters and the client method they call:

Waiter NameClient MethodDefault Delay:Default Max Attempts:
:identity_exists#get_identity_verification_attributes320

Returns:

  • (Array<Symbol>)

    the list of supported waiters.