@ThreadSafe @Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AWSARCZonalShiftAsyncClient extends AWSARCZonalShiftClient implements AWSARCZonalShiftAsync
AsyncHandler can be used to receive
notification when an asynchronous operation completes.
Welcome to the API Reference Guide for zonal shift and zonal autoshift in Amazon Route 53 Application Recovery Controller (Route 53 ARC).
You can start a zonal shift to move traffic for a load balancer resource away from an Availability Zone to help your application recover quickly from an impairment in an Availability Zone. For example, you can recover your application from a developer's bad code deployment or from an Amazon Web Services infrastructure failure in a single Availability Zone.
You can also configure zonal autoshift for supported load balancer resources. Zonal autoshift is a capability in Route 53 ARC where you authorize Amazon Web Services to shift away application resource traffic from an Availability Zone during events, on your behalf, to help reduce your time to recovery. Amazon Web Services starts an autoshift when internal telemetry indicates that there is an Availability Zone impairment that could potentially impact customers.
To help make sure that zonal autoshift is safe for your application, you must also configure practice runs when you enable zonal autoshift for a resource. Practice runs start weekly zonal shifts for a resource, to shift traffic for the resource away from an Availability Zone. Practice runs help you to make sure, on a regular basis, that you have enough capacity in all the Availability Zones in an Amazon Web Services Region for your application to continue to operate normally when traffic for a resource is shifted away from one Availability Zone.
Before you configure practice runs or enable zonal autoshift, we strongly recommend that you prescale your application resource capacity in all Availability Zones in the Region where your application resources are deployed. You should not rely on scaling on demand when an autoshift or practice run starts. Zonal autoshift, including practice runs, works independently, and does not wait for auto scaling actions to complete. Relying on auto scaling, instead of pre-scaling, can result in loss of availability.
If you use auto scaling to handle regular cycles of traffic, we strongly recommend that you configure the minimum capacity of your auto scaling to continue operating normally with the loss of an Availability Zone.
Be aware that Route 53 ARC does not inspect the health of individual resources. Amazon Web Services only starts an autoshift when Amazon Web Services telemetry detects that there is an Availability Zone impairment that could potentially impact customers. In some cases, resources might be shifted away that are not experiencing impact.
For more information about using zonal shift and zonal autoshift, see the Amazon Route 53 Application Recovery Controller Developer Guide.
LOGGING_AWS_REQUEST_METRICENDPOINT_PREFIX| Modifier and Type | Method and Description |
|---|---|
static AWSARCZonalShiftAsyncClientBuilder |
asyncBuilder() |
Future<CancelZonalShiftResult> |
cancelZonalShiftAsync(CancelZonalShiftRequest request)
Cancel a zonal shift in Amazon Route 53 Application Recovery Controller.
|
Future<CancelZonalShiftResult> |
cancelZonalShiftAsync(CancelZonalShiftRequest request,
AsyncHandler<CancelZonalShiftRequest,CancelZonalShiftResult> asyncHandler)
Cancel a zonal shift in Amazon Route 53 Application Recovery Controller.
|
Future<CreatePracticeRunConfigurationResult> |
createPracticeRunConfigurationAsync(CreatePracticeRunConfigurationRequest request)
A practice run configuration for zonal autoshift is required when you enable zonal autoshift.
|
Future<CreatePracticeRunConfigurationResult> |
createPracticeRunConfigurationAsync(CreatePracticeRunConfigurationRequest request,
AsyncHandler<CreatePracticeRunConfigurationRequest,CreatePracticeRunConfigurationResult> asyncHandler)
A practice run configuration for zonal autoshift is required when you enable zonal autoshift.
|
Future<DeletePracticeRunConfigurationResult> |
deletePracticeRunConfigurationAsync(DeletePracticeRunConfigurationRequest request)
Deletes the practice run configuration for a resource.
|
Future<DeletePracticeRunConfigurationResult> |
deletePracticeRunConfigurationAsync(DeletePracticeRunConfigurationRequest request,
AsyncHandler<DeletePracticeRunConfigurationRequest,DeletePracticeRunConfigurationResult> asyncHandler)
Deletes the practice run configuration for a resource.
|
Future<GetAutoshiftObserverNotificationStatusResult> |
getAutoshiftObserverNotificationStatusAsync(GetAutoshiftObserverNotificationStatusRequest request)
Returns the status of autoshift observer notification.
|
Future<GetAutoshiftObserverNotificationStatusResult> |
getAutoshiftObserverNotificationStatusAsync(GetAutoshiftObserverNotificationStatusRequest request,
AsyncHandler<GetAutoshiftObserverNotificationStatusRequest,GetAutoshiftObserverNotificationStatusResult> asyncHandler)
Returns the status of autoshift observer notification.
|
ExecutorService |
getExecutorService()
Returns the executor service used by this client to execute async requests.
|
Future<GetManagedResourceResult> |
getManagedResourceAsync(GetManagedResourceRequest request)
Get information about a resource that's been registered for zonal shifts with Amazon Route 53 Application
Recovery Controller in this Amazon Web Services Region.
|
Future<GetManagedResourceResult> |
getManagedResourceAsync(GetManagedResourceRequest request,
AsyncHandler<GetManagedResourceRequest,GetManagedResourceResult> asyncHandler)
Get information about a resource that's been registered for zonal shifts with Amazon Route 53 Application
Recovery Controller in this Amazon Web Services Region.
|
Future<ListAutoshiftsResult> |
listAutoshiftsAsync(ListAutoshiftsRequest request)
Returns a list of autoshifts for an Amazon Web Services Region.
|
Future<ListAutoshiftsResult> |
listAutoshiftsAsync(ListAutoshiftsRequest request,
AsyncHandler<ListAutoshiftsRequest,ListAutoshiftsResult> asyncHandler)
Returns a list of autoshifts for an Amazon Web Services Region.
|
Future<ListManagedResourcesResult> |
listManagedResourcesAsync(ListManagedResourcesRequest request)
Lists all the resources in your Amazon Web Services account in this Amazon Web Services Region that are managed
for zonal shifts in Amazon Route 53 Application Recovery Controller, and information about them.
|
Future<ListManagedResourcesResult> |
listManagedResourcesAsync(ListManagedResourcesRequest request,
AsyncHandler<ListManagedResourcesRequest,ListManagedResourcesResult> asyncHandler)
Lists all the resources in your Amazon Web Services account in this Amazon Web Services Region that are managed
for zonal shifts in Amazon Route 53 Application Recovery Controller, and information about them.
|
Future<ListZonalShiftsResult> |
listZonalShiftsAsync(ListZonalShiftsRequest request)
Lists all active and completed zonal shifts in Amazon Route 53 Application Recovery Controller in your Amazon Web
Services account in this Amazon Web Services Region.
|
Future<ListZonalShiftsResult> |
listZonalShiftsAsync(ListZonalShiftsRequest request,
AsyncHandler<ListZonalShiftsRequest,ListZonalShiftsResult> asyncHandler)
Lists all active and completed zonal shifts in Amazon Route 53 Application Recovery Controller in your Amazon Web
Services account in this Amazon Web Services Region.
|
void |
shutdown()
Shuts down the client, releasing all managed resources.
|
Future<StartZonalShiftResult> |
startZonalShiftAsync(StartZonalShiftRequest request)
You start a zonal shift to temporarily move load balancer traffic away from an Availability Zone in an Amazon Web
Services Region, to help your application recover immediately, for example, from a developer's bad code
deployment or from an Amazon Web Services infrastructure failure in a single Availability Zone.
|
Future<StartZonalShiftResult> |
startZonalShiftAsync(StartZonalShiftRequest request,
AsyncHandler<StartZonalShiftRequest,StartZonalShiftResult> asyncHandler)
You start a zonal shift to temporarily move load balancer traffic away from an Availability Zone in an Amazon Web
Services Region, to help your application recover immediately, for example, from a developer's bad code
deployment or from an Amazon Web Services infrastructure failure in a single Availability Zone.
|
Future<UpdateAutoshiftObserverNotificationStatusResult> |
updateAutoshiftObserverNotificationStatusAsync(UpdateAutoshiftObserverNotificationStatusRequest request)
Update the status of autoshift observer notification.
|
Future<UpdateAutoshiftObserverNotificationStatusResult> |
updateAutoshiftObserverNotificationStatusAsync(UpdateAutoshiftObserverNotificationStatusRequest request,
AsyncHandler<UpdateAutoshiftObserverNotificationStatusRequest,UpdateAutoshiftObserverNotificationStatusResult> asyncHandler)
Update the status of autoshift observer notification.
|
Future<UpdatePracticeRunConfigurationResult> |
updatePracticeRunConfigurationAsync(UpdatePracticeRunConfigurationRequest request)
Update a practice run configuration to change one or more of the following: add, change, or remove the blocking
alarm; change the outcome alarm; or add, change, or remove blocking dates or time windows.
|
Future<UpdatePracticeRunConfigurationResult> |
updatePracticeRunConfigurationAsync(UpdatePracticeRunConfigurationRequest request,
AsyncHandler<UpdatePracticeRunConfigurationRequest,UpdatePracticeRunConfigurationResult> asyncHandler)
Update a practice run configuration to change one or more of the following: add, change, or remove the blocking
alarm; change the outcome alarm; or add, change, or remove blocking dates or time windows.
|
Future<UpdateZonalAutoshiftConfigurationResult> |
updateZonalAutoshiftConfigurationAsync(UpdateZonalAutoshiftConfigurationRequest request)
The zonal autoshift configuration for a resource includes the practice run configuration and the status for
running autoshifts, zonal autoshift status.
|
Future<UpdateZonalAutoshiftConfigurationResult> |
updateZonalAutoshiftConfigurationAsync(UpdateZonalAutoshiftConfigurationRequest request,
AsyncHandler<UpdateZonalAutoshiftConfigurationRequest,UpdateZonalAutoshiftConfigurationResult> asyncHandler)
The zonal autoshift configuration for a resource includes the practice run configuration and the status for
running autoshifts, zonal autoshift status.
|
Future<UpdateZonalShiftResult> |
updateZonalShiftAsync(UpdateZonalShiftRequest request)
Update an active zonal shift in Amazon Route 53 Application Recovery Controller in your Amazon Web Services
account.
|
Future<UpdateZonalShiftResult> |
updateZonalShiftAsync(UpdateZonalShiftRequest request,
AsyncHandler<UpdateZonalShiftRequest,UpdateZonalShiftResult> asyncHandler)
Update an active zonal shift in Amazon Route 53 Application Recovery Controller in your Amazon Web Services
account.
|
builder, cancelZonalShift, createPracticeRunConfiguration, deletePracticeRunConfiguration, getAutoshiftObserverNotificationStatus, getCachedResponseMetadata, getManagedResource, listAutoshifts, listManagedResources, listZonalShifts, startZonalShift, updateAutoshiftObserverNotificationStatus, updatePracticeRunConfiguration, updateZonalAutoshiftConfiguration, updateZonalShiftaddRequestHandler, addRequestHandler, configureRegion, getClientConfiguration, getEndpointPrefix, getMonitoringListeners, getRequestMetricsCollector, getServiceName, getSignerByURI, getSignerOverride, getSignerRegionOverride, getTimeOffset, makeImmutable, removeRequestHandler, removeRequestHandler, setEndpoint, setEndpoint, setRegion, setServiceNameIntern, setSignerRegionOverride, setTimeOffset, withEndpoint, withRegion, withRegion, withTimeOffsetequals, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitcancelZonalShift, createPracticeRunConfiguration, deletePracticeRunConfiguration, getAutoshiftObserverNotificationStatus, getCachedResponseMetadata, getManagedResource, listAutoshifts, listManagedResources, listZonalShifts, startZonalShift, updateAutoshiftObserverNotificationStatus, updatePracticeRunConfiguration, updateZonalAutoshiftConfiguration, updateZonalShiftpublic static AWSARCZonalShiftAsyncClientBuilder asyncBuilder()
public ExecutorService getExecutorService()
public Future<CancelZonalShiftResult> cancelZonalShiftAsync(CancelZonalShiftRequest request)
AWSARCZonalShiftAsyncCancel a zonal shift in Amazon Route 53 Application Recovery Controller. To cancel the zonal shift, specify the zonal shift ID.
A zonal shift can be one that you've started for a resource in your Amazon Web Services account in an Amazon Web Services Region, or it can be a zonal shift started by a practice run with zonal autoshift.
cancelZonalShiftAsync in interface AWSARCZonalShiftAsyncpublic Future<CancelZonalShiftResult> cancelZonalShiftAsync(CancelZonalShiftRequest request, AsyncHandler<CancelZonalShiftRequest,CancelZonalShiftResult> asyncHandler)
AWSARCZonalShiftAsyncCancel a zonal shift in Amazon Route 53 Application Recovery Controller. To cancel the zonal shift, specify the zonal shift ID.
A zonal shift can be one that you've started for a resource in your Amazon Web Services account in an Amazon Web Services Region, or it can be a zonal shift started by a practice run with zonal autoshift.
cancelZonalShiftAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreatePracticeRunConfigurationResult> createPracticeRunConfigurationAsync(CreatePracticeRunConfigurationRequest request)
AWSARCZonalShiftAsyncA practice run configuration for zonal autoshift is required when you enable zonal autoshift. A practice run configuration includes specifications for blocked dates and blocked time windows, and for Amazon CloudWatch alarms that you create to use with practice runs. The alarms that you specify are an outcome alarm, to monitor application health during practice runs and, optionally, a blocking alarm, to block practice runs from starting.
When a resource has a practice run configuration, Route 53 ARC starts zonal shifts for the resource weekly, to shift traffic for practice runs. Practice runs help you to ensure that shifting away traffic from an Availability Zone during an autoshift is safe for your application.
For more information, see Considerations when you configure zonal autoshift in the Amazon Route 53 Application Recovery Controller Developer Guide.
createPracticeRunConfigurationAsync in interface AWSARCZonalShiftAsyncpublic Future<CreatePracticeRunConfigurationResult> createPracticeRunConfigurationAsync(CreatePracticeRunConfigurationRequest request, AsyncHandler<CreatePracticeRunConfigurationRequest,CreatePracticeRunConfigurationResult> asyncHandler)
AWSARCZonalShiftAsyncA practice run configuration for zonal autoshift is required when you enable zonal autoshift. A practice run configuration includes specifications for blocked dates and blocked time windows, and for Amazon CloudWatch alarms that you create to use with practice runs. The alarms that you specify are an outcome alarm, to monitor application health during practice runs and, optionally, a blocking alarm, to block practice runs from starting.
When a resource has a practice run configuration, Route 53 ARC starts zonal shifts for the resource weekly, to shift traffic for practice runs. Practice runs help you to ensure that shifting away traffic from an Availability Zone during an autoshift is safe for your application.
For more information, see Considerations when you configure zonal autoshift in the Amazon Route 53 Application Recovery Controller Developer Guide.
createPracticeRunConfigurationAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeletePracticeRunConfigurationResult> deletePracticeRunConfigurationAsync(DeletePracticeRunConfigurationRequest request)
AWSARCZonalShiftAsyncDeletes the practice run configuration for a resource. Before you can delete a practice run configuration for a resource., you must disable zonal autoshift for the resource. Practice runs must be configured for zonal autoshift to be enabled.
deletePracticeRunConfigurationAsync in interface AWSARCZonalShiftAsyncpublic Future<DeletePracticeRunConfigurationResult> deletePracticeRunConfigurationAsync(DeletePracticeRunConfigurationRequest request, AsyncHandler<DeletePracticeRunConfigurationRequest,DeletePracticeRunConfigurationResult> asyncHandler)
AWSARCZonalShiftAsyncDeletes the practice run configuration for a resource. Before you can delete a practice run configuration for a resource., you must disable zonal autoshift for the resource. Practice runs must be configured for zonal autoshift to be enabled.
deletePracticeRunConfigurationAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<GetAutoshiftObserverNotificationStatusResult> getAutoshiftObserverNotificationStatusAsync(GetAutoshiftObserverNotificationStatusRequest request)
AWSARCZonalShiftAsyncReturns the status of autoshift observer notification. Autoshift observer notification enables you to be notified, through Amazon EventBridge, when there is an autoshift event for zonal autoshift.
If the status is ENABLED, Route 53 ARC includes all autoshift events when you use the EventBridge
pattern Autoshift In Progress. When the status is DISABLED, Route 53 ARC includes only
autoshift events for autoshifts when one or more of your resources is included in the autoshift.
For more information, see Notifications for practice runs and autoshifts in the Amazon Route 53 Application Recovery Controller Developer Guide.
getAutoshiftObserverNotificationStatusAsync in interface AWSARCZonalShiftAsyncpublic Future<GetAutoshiftObserverNotificationStatusResult> getAutoshiftObserverNotificationStatusAsync(GetAutoshiftObserverNotificationStatusRequest request, AsyncHandler<GetAutoshiftObserverNotificationStatusRequest,GetAutoshiftObserverNotificationStatusResult> asyncHandler)
AWSARCZonalShiftAsyncReturns the status of autoshift observer notification. Autoshift observer notification enables you to be notified, through Amazon EventBridge, when there is an autoshift event for zonal autoshift.
If the status is ENABLED, Route 53 ARC includes all autoshift events when you use the EventBridge
pattern Autoshift In Progress. When the status is DISABLED, Route 53 ARC includes only
autoshift events for autoshifts when one or more of your resources is included in the autoshift.
For more information, see Notifications for practice runs and autoshifts in the Amazon Route 53 Application Recovery Controller Developer Guide.
getAutoshiftObserverNotificationStatusAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<GetManagedResourceResult> getManagedResourceAsync(GetManagedResourceRequest request)
AWSARCZonalShiftAsyncGet information about a resource that's been registered for zonal shifts with Amazon Route 53 Application Recovery Controller in this Amazon Web Services Region. Resources that are registered for zonal shifts are managed resources in Route 53 ARC. You can start zonal shifts and configure zonal autoshift for managed resources.
At this time, you can only start a zonal shift or configure zonal autoshift for Network Load Balancers and Application Load Balancers with cross-zone load balancing turned off.
getManagedResourceAsync in interface AWSARCZonalShiftAsyncpublic Future<GetManagedResourceResult> getManagedResourceAsync(GetManagedResourceRequest request, AsyncHandler<GetManagedResourceRequest,GetManagedResourceResult> asyncHandler)
AWSARCZonalShiftAsyncGet information about a resource that's been registered for zonal shifts with Amazon Route 53 Application Recovery Controller in this Amazon Web Services Region. Resources that are registered for zonal shifts are managed resources in Route 53 ARC. You can start zonal shifts and configure zonal autoshift for managed resources.
At this time, you can only start a zonal shift or configure zonal autoshift for Network Load Balancers and Application Load Balancers with cross-zone load balancing turned off.
getManagedResourceAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListAutoshiftsResult> listAutoshiftsAsync(ListAutoshiftsRequest request)
AWSARCZonalShiftAsync
Returns a list of autoshifts for an Amazon Web Services Region. By default, the call returns only
ACTIVE autoshifts. Optionally, you can specify the status parameter to return
COMPLETED autoshifts.
listAutoshiftsAsync in interface AWSARCZonalShiftAsyncpublic Future<ListAutoshiftsResult> listAutoshiftsAsync(ListAutoshiftsRequest request, AsyncHandler<ListAutoshiftsRequest,ListAutoshiftsResult> asyncHandler)
AWSARCZonalShiftAsync
Returns a list of autoshifts for an Amazon Web Services Region. By default, the call returns only
ACTIVE autoshifts. Optionally, you can specify the status parameter to return
COMPLETED autoshifts.
listAutoshiftsAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListManagedResourcesResult> listManagedResourcesAsync(ListManagedResourcesRequest request)
AWSARCZonalShiftAsyncLists all the resources in your Amazon Web Services account in this Amazon Web Services Region that are managed for zonal shifts in Amazon Route 53 Application Recovery Controller, and information about them. The information includes the zonal autoshift status for the resource, as well as the Amazon Resource Name (ARN), the Availability Zones that each resource is deployed in, and the resource name.
listManagedResourcesAsync in interface AWSARCZonalShiftAsyncpublic Future<ListManagedResourcesResult> listManagedResourcesAsync(ListManagedResourcesRequest request, AsyncHandler<ListManagedResourcesRequest,ListManagedResourcesResult> asyncHandler)
AWSARCZonalShiftAsyncLists all the resources in your Amazon Web Services account in this Amazon Web Services Region that are managed for zonal shifts in Amazon Route 53 Application Recovery Controller, and information about them. The information includes the zonal autoshift status for the resource, as well as the Amazon Resource Name (ARN), the Availability Zones that each resource is deployed in, and the resource name.
listManagedResourcesAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListZonalShiftsResult> listZonalShiftsAsync(ListZonalShiftsRequest request)
AWSARCZonalShiftAsync
Lists all active and completed zonal shifts in Amazon Route 53 Application Recovery Controller in your Amazon Web
Services account in this Amazon Web Services Region. ListZonalShifts returns customer-initiated
zonal shifts, as well as practice run zonal shifts that Route 53 ARC started on your behalf for zonal autoshift.
The ListZonalShifts operation does not list autoshifts. For more information about listing
autoshifts, see ">ListAutoshifts.
listZonalShiftsAsync in interface AWSARCZonalShiftAsyncpublic Future<ListZonalShiftsResult> listZonalShiftsAsync(ListZonalShiftsRequest request, AsyncHandler<ListZonalShiftsRequest,ListZonalShiftsResult> asyncHandler)
AWSARCZonalShiftAsync
Lists all active and completed zonal shifts in Amazon Route 53 Application Recovery Controller in your Amazon Web
Services account in this Amazon Web Services Region. ListZonalShifts returns customer-initiated
zonal shifts, as well as practice run zonal shifts that Route 53 ARC started on your behalf for zonal autoshift.
The ListZonalShifts operation does not list autoshifts. For more information about listing
autoshifts, see ">ListAutoshifts.
listZonalShiftsAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<StartZonalShiftResult> startZonalShiftAsync(StartZonalShiftRequest request)
AWSARCZonalShiftAsyncYou start a zonal shift to temporarily move load balancer traffic away from an Availability Zone in an Amazon Web Services Region, to help your application recover immediately, for example, from a developer's bad code deployment or from an Amazon Web Services infrastructure failure in a single Availability Zone. You can start a zonal shift in Route 53 ARC only for managed resources in your Amazon Web Services account in an Amazon Web Services Region. Resources are automatically registered with Route 53 ARC by Amazon Web Services services.
At this time, you can only start a zonal shift for Network Load Balancers and Application Load Balancers with cross-zone load balancing turned off.
When you start a zonal shift, traffic for the resource is no longer routed to the Availability Zone. The zonal shift is created immediately in Route 53 ARC. However, it can take a short time, typically up to a few minutes, for existing, in-progress connections in the Availability Zone to complete.
For more information, see Zonal shift in the Amazon Route 53 Application Recovery Controller Developer Guide.
startZonalShiftAsync in interface AWSARCZonalShiftAsyncpublic Future<StartZonalShiftResult> startZonalShiftAsync(StartZonalShiftRequest request, AsyncHandler<StartZonalShiftRequest,StartZonalShiftResult> asyncHandler)
AWSARCZonalShiftAsyncYou start a zonal shift to temporarily move load balancer traffic away from an Availability Zone in an Amazon Web Services Region, to help your application recover immediately, for example, from a developer's bad code deployment or from an Amazon Web Services infrastructure failure in a single Availability Zone. You can start a zonal shift in Route 53 ARC only for managed resources in your Amazon Web Services account in an Amazon Web Services Region. Resources are automatically registered with Route 53 ARC by Amazon Web Services services.
At this time, you can only start a zonal shift for Network Load Balancers and Application Load Balancers with cross-zone load balancing turned off.
When you start a zonal shift, traffic for the resource is no longer routed to the Availability Zone. The zonal shift is created immediately in Route 53 ARC. However, it can take a short time, typically up to a few minutes, for existing, in-progress connections in the Availability Zone to complete.
For more information, see Zonal shift in the Amazon Route 53 Application Recovery Controller Developer Guide.
startZonalShiftAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateAutoshiftObserverNotificationStatusResult> updateAutoshiftObserverNotificationStatusAsync(UpdateAutoshiftObserverNotificationStatusRequest request)
AWSARCZonalShiftAsyncUpdate the status of autoshift observer notification. Autoshift observer notification enables you to be notified, through Amazon EventBridge, when there is an autoshift event for zonal autoshift.
If the status is ENABLED, Route 53 ARC includes all autoshift events when you use the EventBridge
pattern Autoshift In Progress. When the status is DISABLED, Route 53 ARC includes only
autoshift events for autoshifts when one or more of your resources is included in the autoshift.
For more information, see Notifications for practice runs and autoshifts in the Amazon Route 53 Application Recovery Controller Developer Guide.
updateAutoshiftObserverNotificationStatusAsync in interface AWSARCZonalShiftAsyncpublic Future<UpdateAutoshiftObserverNotificationStatusResult> updateAutoshiftObserverNotificationStatusAsync(UpdateAutoshiftObserverNotificationStatusRequest request, AsyncHandler<UpdateAutoshiftObserverNotificationStatusRequest,UpdateAutoshiftObserverNotificationStatusResult> asyncHandler)
AWSARCZonalShiftAsyncUpdate the status of autoshift observer notification. Autoshift observer notification enables you to be notified, through Amazon EventBridge, when there is an autoshift event for zonal autoshift.
If the status is ENABLED, Route 53 ARC includes all autoshift events when you use the EventBridge
pattern Autoshift In Progress. When the status is DISABLED, Route 53 ARC includes only
autoshift events for autoshifts when one or more of your resources is included in the autoshift.
For more information, see Notifications for practice runs and autoshifts in the Amazon Route 53 Application Recovery Controller Developer Guide.
updateAutoshiftObserverNotificationStatusAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdatePracticeRunConfigurationResult> updatePracticeRunConfigurationAsync(UpdatePracticeRunConfigurationRequest request)
AWSARCZonalShiftAsyncUpdate a practice run configuration to change one or more of the following: add, change, or remove the blocking alarm; change the outcome alarm; or add, change, or remove blocking dates or time windows.
updatePracticeRunConfigurationAsync in interface AWSARCZonalShiftAsyncpublic Future<UpdatePracticeRunConfigurationResult> updatePracticeRunConfigurationAsync(UpdatePracticeRunConfigurationRequest request, AsyncHandler<UpdatePracticeRunConfigurationRequest,UpdatePracticeRunConfigurationResult> asyncHandler)
AWSARCZonalShiftAsyncUpdate a practice run configuration to change one or more of the following: add, change, or remove the blocking alarm; change the outcome alarm; or add, change, or remove blocking dates or time windows.
updatePracticeRunConfigurationAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateZonalAutoshiftConfigurationResult> updateZonalAutoshiftConfigurationAsync(UpdateZonalAutoshiftConfigurationRequest request)
AWSARCZonalShiftAsyncThe zonal autoshift configuration for a resource includes the practice run configuration and the status for running autoshifts, zonal autoshift status. When a resource has a practice run configuation, Route 53 ARC starts weekly zonal shifts for the resource, to shift traffic away from an Availability Zone. Weekly practice runs help you to make sure that your application can continue to operate normally with the loss of one Availability Zone.
You can update the zonal autoshift autoshift status to enable or disable zonal autoshift. When zonal autoshift is
ENABLED, you authorize Amazon Web Services to shift away resource traffic for an application from an
Availability Zone during events, on your behalf, to help reduce time to recovery. Traffic is also shifted away
for the required weekly practice runs.
updateZonalAutoshiftConfigurationAsync in interface AWSARCZonalShiftAsyncpublic Future<UpdateZonalAutoshiftConfigurationResult> updateZonalAutoshiftConfigurationAsync(UpdateZonalAutoshiftConfigurationRequest request, AsyncHandler<UpdateZonalAutoshiftConfigurationRequest,UpdateZonalAutoshiftConfigurationResult> asyncHandler)
AWSARCZonalShiftAsyncThe zonal autoshift configuration for a resource includes the practice run configuration and the status for running autoshifts, zonal autoshift status. When a resource has a practice run configuation, Route 53 ARC starts weekly zonal shifts for the resource, to shift traffic away from an Availability Zone. Weekly practice runs help you to make sure that your application can continue to operate normally with the loss of one Availability Zone.
You can update the zonal autoshift autoshift status to enable or disable zonal autoshift. When zonal autoshift is
ENABLED, you authorize Amazon Web Services to shift away resource traffic for an application from an
Availability Zone during events, on your behalf, to help reduce time to recovery. Traffic is also shifted away
for the required weekly practice runs.
updateZonalAutoshiftConfigurationAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateZonalShiftResult> updateZonalShiftAsync(UpdateZonalShiftRequest request)
AWSARCZonalShiftAsyncUpdate an active zonal shift in Amazon Route 53 Application Recovery Controller in your Amazon Web Services account. You can update a zonal shift to set a new expiration, or edit or replace the comment for the zonal shift.
updateZonalShiftAsync in interface AWSARCZonalShiftAsyncpublic Future<UpdateZonalShiftResult> updateZonalShiftAsync(UpdateZonalShiftRequest request, AsyncHandler<UpdateZonalShiftRequest,UpdateZonalShiftResult> asyncHandler)
AWSARCZonalShiftAsyncUpdate an active zonal shift in Amazon Route 53 Application Recovery Controller in your Amazon Web Services account. You can update a zonal shift to set a new expiration, or edit or replace the comment for the zonal shift.
updateZonalShiftAsync in interface AWSARCZonalShiftAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public void shutdown()
getExecutorService().shutdown() followed by getExecutorService().awaitTermination() prior to
calling this method.shutdown in interface AWSARCZonalShiftshutdown in class AWSARCZonalShiftClient