AssociationVersionInfo (AWS SDK for Java

java.lang.Object
- com.amazonaws.services.simplesystemsmanagement.model.AssociationVersionInfo

All Implemented Interfaces:: StructuredPojo, Serializable, Cloneable

@Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class AssociationVersionInfo
extends Object
implements Serializable, Cloneable, StructuredPojo

Information about the association version.

See Also:: AWS API Documentation, Serialized Form

Constructor Summary

Constructors
Constructor and Description

AssociationVersionInfo()

Constructors
Constructor and Description
`AssociationVersionInfo()`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`AssociationVersionInfo`	`addParametersEntry(String key, List<String> value)` Add a single Parameters entry
`AssociationVersionInfo`	`clearParametersEntries()` Removes all the entries added into Parameters.
`AssociationVersionInfo`	`clone()`
`boolean`	`equals(Object obj)`
`Boolean`	`getApplyOnlyAtCronInterval()` By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified.
`String`	`getAssociationId()` The ID created by the system when the association was created.
`String`	`getAssociationName()` The name specified for the association version when the association version was created.
`String`	`getAssociationVersion()` The association version.
`List<String>`	`getCalendarNames()` The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under.
`String`	`getComplianceSeverity()` The severity level that is assigned to the association.
`Date`	`getCreatedDate()` The date the association version was created.
`String`	`getDocumentVersion()` The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
`Integer`	`getDuration()` The number of hours that an association can run on specified targets.
`String`	`getMaxConcurrency()` The maximum number of targets allowed to run the association at the same time.
`String`	`getMaxErrors()` The number of errors that are allowed before the system stops sending requests to run the association on additional targets.
`String`	`getName()` The name specified when the association was created.
`InstanceAssociationOutputLocation`	`getOutputLocation()` The location in Amazon S3 specified for the association when the association version was created.
`Map<String,List<String>>`	`getParameters()` Parameters specified when the association version was created.
`String`	`getScheduleExpression()` The cron or rate schedule specified for the association when the association version was created.
`Integer`	`getScheduleOffset()` Number of days to wait after the scheduled day to run an association.
`String`	`getSyncCompliance()` The mode for generating association compliance.
`List<TargetLocation>`	`getTargetLocations()` The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
`List<Map<String,List<String>>>`	`getTargetMaps()` A key-value mapping of document parameters to target resources.
`List<Target>`	`getTargets()` The targets specified for the association when the association version was created.
`int`	`hashCode()`
`Boolean`	`isApplyOnlyAtCronInterval()` By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified.
`void`	`marshall(ProtocolMarshaller protocolMarshaller)` Marshalls this structured data using the given `ProtocolMarshaller`.
`void`	`setApplyOnlyAtCronInterval(Boolean applyOnlyAtCronInterval)` By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified.
`void`	`setAssociationId(String associationId)` The ID created by the system when the association was created.
`void`	`setAssociationName(String associationName)` The name specified for the association version when the association version was created.
`void`	`setAssociationVersion(String associationVersion)` The association version.
`void`	`setCalendarNames(Collection<String> calendarNames)` The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under.
`void`	`setComplianceSeverity(String complianceSeverity)` The severity level that is assigned to the association.
`void`	`setCreatedDate(Date createdDate)` The date the association version was created.
`void`	`setDocumentVersion(String documentVersion)` The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
`void`	`setDuration(Integer duration)` The number of hours that an association can run on specified targets.
`void`	`setMaxConcurrency(String maxConcurrency)` The maximum number of targets allowed to run the association at the same time.
`void`	`setMaxErrors(String maxErrors)` The number of errors that are allowed before the system stops sending requests to run the association on additional targets.
`void`	`setName(String name)` The name specified when the association was created.
`void`	`setOutputLocation(InstanceAssociationOutputLocation outputLocation)` The location in Amazon S3 specified for the association when the association version was created.
`void`	`setParameters(Map<String,List<String>> parameters)` Parameters specified when the association version was created.
`void`	`setScheduleExpression(String scheduleExpression)` The cron or rate schedule specified for the association when the association version was created.
`void`	`setScheduleOffset(Integer scheduleOffset)` Number of days to wait after the scheduled day to run an association.
`void`	`setSyncCompliance(String syncCompliance)` The mode for generating association compliance.
`void`	`setTargetLocations(Collection<TargetLocation> targetLocations)` The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
`void`	`setTargetMaps(Collection<Map<String,List<String>>> targetMaps)` A key-value mapping of document parameters to target resources.
`void`	`setTargets(Collection<Target> targets)` The targets specified for the association when the association version was created.
`String`	`toString()` Returns a string representation of this object.
`AssociationVersionInfo`	`withApplyOnlyAtCronInterval(Boolean applyOnlyAtCronInterval)` By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified.
`AssociationVersionInfo`	`withAssociationId(String associationId)` The ID created by the system when the association was created.
`AssociationVersionInfo`	`withAssociationName(String associationName)` The name specified for the association version when the association version was created.
`AssociationVersionInfo`	`withAssociationVersion(String associationVersion)` The association version.
`AssociationVersionInfo`	`withCalendarNames(Collection<String> calendarNames)` The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under.
`AssociationVersionInfo`	`withCalendarNames(String... calendarNames)` The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under.
`AssociationVersionInfo`	`withComplianceSeverity(AssociationComplianceSeverity complianceSeverity)` The severity level that is assigned to the association.
`AssociationVersionInfo`	`withComplianceSeverity(String complianceSeverity)` The severity level that is assigned to the association.
`AssociationVersionInfo`	`withCreatedDate(Date createdDate)` The date the association version was created.
`AssociationVersionInfo`	`withDocumentVersion(String documentVersion)` The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
`AssociationVersionInfo`	`withDuration(Integer duration)` The number of hours that an association can run on specified targets.
`AssociationVersionInfo`	`withMaxConcurrency(String maxConcurrency)` The maximum number of targets allowed to run the association at the same time.
`AssociationVersionInfo`	`withMaxErrors(String maxErrors)` The number of errors that are allowed before the system stops sending requests to run the association on additional targets.
`AssociationVersionInfo`	`withName(String name)` The name specified when the association was created.
`AssociationVersionInfo`	`withOutputLocation(InstanceAssociationOutputLocation outputLocation)` The location in Amazon S3 specified for the association when the association version was created.
`AssociationVersionInfo`	`withParameters(Map<String,List<String>> parameters)` Parameters specified when the association version was created.
`AssociationVersionInfo`	`withScheduleExpression(String scheduleExpression)` The cron or rate schedule specified for the association when the association version was created.
`AssociationVersionInfo`	`withScheduleOffset(Integer scheduleOffset)` Number of days to wait after the scheduled day to run an association.
`AssociationVersionInfo`	`withSyncCompliance(AssociationSyncCompliance syncCompliance)` The mode for generating association compliance.
`AssociationVersionInfo`	`withSyncCompliance(String syncCompliance)` The mode for generating association compliance.
`AssociationVersionInfo`	`withTargetLocations(Collection<TargetLocation> targetLocations)` The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
`AssociationVersionInfo`	`withTargetLocations(TargetLocation... targetLocations)` The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
`AssociationVersionInfo`	`withTargetMaps(Collection<Map<String,List<String>>> targetMaps)` A key-value mapping of document parameters to target resources.
`AssociationVersionInfo`	`withTargetMaps(Map<String,List<String>>... targetMaps)` A key-value mapping of document parameters to target resources.
`AssociationVersionInfo`	`withTargets(Collection<Target> targets)` The targets specified for the association when the association version was created.
`AssociationVersionInfo`	`withTargets(Target... targets)` The targets specified for the association when the association version was created.

Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait

- Constructor Detail
  - AssociationVersionInfo
```
public AssociationVersionInfo()
```
- Method Detail
  - setAssociationId
```
public void setAssociationId(String associationId)
```
    The ID created by the system when the association was created.
    
    Parameters:
    
    associationId - The ID created by the system when the association was created.
  - getAssociationId
```
public String getAssociationId()
```
    The ID created by the system when the association was created.
    
    Returns:
    
    The ID created by the system when the association was created.
  - withAssociationId
```
public AssociationVersionInfo withAssociationId(String associationId)
```
    The ID created by the system when the association was created.
    
    Parameters:
    
    associationId - The ID created by the system when the association was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setAssociationVersion
```
public void setAssociationVersion(String associationVersion)
```
    The association version.
    
    Parameters:
    
    associationVersion - The association version.
  - getAssociationVersion
```
public String getAssociationVersion()
```
    The association version.
    
    Returns:
    
    The association version.
  - withAssociationVersion
```
public AssociationVersionInfo withAssociationVersion(String associationVersion)
```
    The association version.
    
    Parameters:
    
    associationVersion - The association version.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setCreatedDate
```
public void setCreatedDate(Date createdDate)
```
    The date the association version was created.
    
    Parameters:
    
    createdDate - The date the association version was created.
  - getCreatedDate
```
public Date getCreatedDate()
```
    The date the association version was created.
    
    Returns:
    
    The date the association version was created.
  - withCreatedDate
```
public AssociationVersionInfo withCreatedDate(Date createdDate)
```
    The date the association version was created.
    
    Parameters:
    
    createdDate - The date the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setName
```
public void setName(String name)
```
    The name specified when the association was created.
    
    Parameters:
    
    name - The name specified when the association was created.
  - getName
```
public String getName()
```
    The name specified when the association was created.
    
    Returns:
    
    The name specified when the association was created.
  - withName
```
public AssociationVersionInfo withName(String name)
```
    The name specified when the association was created.
    
    Parameters:
    
    name - The name specified when the association was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setDocumentVersion
```
public void setDocumentVersion(String documentVersion)
```
    The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
    
    Parameters:
    
    documentVersion - The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
  - getDocumentVersion
```
public String getDocumentVersion()
```
    The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
    
    Returns:
    
    The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
  - withDocumentVersion
```
public AssociationVersionInfo withDocumentVersion(String documentVersion)
```
    The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
    
    Parameters:
    
    documentVersion - The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - getParameters
```
public Map<String,List<String>> getParameters()
```
    Parameters specified when the association version was created.
    
    Returns:
    
    Parameters specified when the association version was created.
  - setParameters
```
public void setParameters(Map<String,List<String>> parameters)
```
    Parameters specified when the association version was created.
    
    Parameters:
    
    parameters - Parameters specified when the association version was created.
  - withParameters
```
public AssociationVersionInfo withParameters(Map<String,List<String>> parameters)
```
    Parameters specified when the association version was created.
    
    Parameters:
    
    parameters - Parameters specified when the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - addParametersEntry
```
public AssociationVersionInfo addParametersEntry(String key,
                                                 List<String> value)
```
    Add a single Parameters entry
    
    See Also:
    
    withParameters(java.util.Map<java.lang.String, java.util.List<java.lang.String>>)
  - clearParametersEntries
```
public AssociationVersionInfo clearParametersEntries()
```
    Removes all the entries added into Parameters.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - getTargets
```
public List<Target> getTargets()
```
    The targets specified for the association when the association version was created.
    
    Returns:
    
    The targets specified for the association when the association version was created.
  - setTargets
```
public void setTargets(Collection<Target> targets)
```
    The targets specified for the association when the association version was created.
    
    Parameters:
    
    targets - The targets specified for the association when the association version was created.
  - withTargets
```
public AssociationVersionInfo withTargets(Target... targets)
```
    The targets specified for the association when the association version was created.
    
    NOTE: This method appends the values to the existing list (if any). Use setTargets(java.util.Collection) or withTargets(java.util.Collection) if you want to override the existing values.
    
    Parameters:
    
    targets - The targets specified for the association when the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - withTargets
```
public AssociationVersionInfo withTargets(Collection<Target> targets)
```
    The targets specified for the association when the association version was created.
    
    Parameters:
    
    targets - The targets specified for the association when the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setScheduleExpression
```
public void setScheduleExpression(String scheduleExpression)
```
    The cron or rate schedule specified for the association when the association version was created.
    
    Parameters:
    
    scheduleExpression - The cron or rate schedule specified for the association when the association version was created.
  - getScheduleExpression
```
public String getScheduleExpression()
```
    The cron or rate schedule specified for the association when the association version was created.
    
    Returns:
    
    The cron or rate schedule specified for the association when the association version was created.
  - withScheduleExpression
```
public AssociationVersionInfo withScheduleExpression(String scheduleExpression)
```
    The cron or rate schedule specified for the association when the association version was created.
    
    Parameters:
    
    scheduleExpression - The cron or rate schedule specified for the association when the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setOutputLocation
```
public void setOutputLocation(InstanceAssociationOutputLocation outputLocation)
```
    The location in Amazon S3 specified for the association when the association version was created.
    
    Parameters:
    
    outputLocation - The location in Amazon S3 specified for the association when the association version was created.
  - getOutputLocation
```
public InstanceAssociationOutputLocation getOutputLocation()
```
    The location in Amazon S3 specified for the association when the association version was created.
    
    Returns:
    
    The location in Amazon S3 specified for the association when the association version was created.
  - withOutputLocation
```
public AssociationVersionInfo withOutputLocation(InstanceAssociationOutputLocation outputLocation)
```
    The location in Amazon S3 specified for the association when the association version was created.
    
    Parameters:
    
    outputLocation - The location in Amazon S3 specified for the association when the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setAssociationName
```
public void setAssociationName(String associationName)
```
    The name specified for the association version when the association version was created.
    
    Parameters:
    
    associationName - The name specified for the association version when the association version was created.
  - getAssociationName
```
public String getAssociationName()
```
    The name specified for the association version when the association version was created.
    
    Returns:
    
    The name specified for the association version when the association version was created.
  - withAssociationName
```
public AssociationVersionInfo withAssociationName(String associationName)
```
    The name specified for the association version when the association version was created.
    
    Parameters:
    
    associationName - The name specified for the association version when the association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setMaxErrors
```
public void setMaxErrors(String maxErrors)
```
    The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.
    
    Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
    
    Parameters:
    
    maxErrors - The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.
    
    Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
  - getMaxErrors
```
public String getMaxErrors()
```
    The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.
    
    Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
    
    Returns:
    
    The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.
    
    Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
  - withMaxErrors
```
public AssociationVersionInfo withMaxErrors(String maxErrors)
```
    The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.
    
    Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
    
    Parameters:
    
    maxErrors - The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.
    
    Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setMaxConcurrency
```
public void setMaxConcurrency(String maxConcurrency)
```
    The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
    
    If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.
    
    Parameters:
    
    maxConcurrency - The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
    
    If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.
  - getMaxConcurrency
```
public String getMaxConcurrency()
```
    The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
    
    If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.
    
    Returns:
    
    The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
    
    If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.
  - withMaxConcurrency
```
public AssociationVersionInfo withMaxConcurrency(String maxConcurrency)
```
    The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
    
    If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.
    
    Parameters:
    
    maxConcurrency - The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
    
    If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setComplianceSeverity
```
public void setComplianceSeverity(String complianceSeverity)
```
    The severity level that is assigned to the association.
    
    Parameters:
    
    complianceSeverity - The severity level that is assigned to the association.
    
    See Also:
    
    AssociationComplianceSeverity
  - getComplianceSeverity
```
public String getComplianceSeverity()
```
    The severity level that is assigned to the association.
    
    Returns:
    
    The severity level that is assigned to the association.
    
    See Also:
    
    AssociationComplianceSeverity
  - withComplianceSeverity
```
public AssociationVersionInfo withComplianceSeverity(String complianceSeverity)
```
    The severity level that is assigned to the association.
    
    Parameters:
    
    complianceSeverity - The severity level that is assigned to the association.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    AssociationComplianceSeverity
  - withComplianceSeverity
```
public AssociationVersionInfo withComplianceSeverity(AssociationComplianceSeverity complianceSeverity)
```
    The severity level that is assigned to the association.
    
    Parameters:
    
    complianceSeverity - The severity level that is assigned to the association.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    AssociationComplianceSeverity
  - setSyncCompliance
```
public void setSyncCompliance(String syncCompliance)
```
    The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    Parameters:
    
    syncCompliance - The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    See Also:
    
    AssociationSyncCompliance
  - getSyncCompliance
```
public String getSyncCompliance()
```
    The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    Returns:
    
    The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    See Also:
    
    AssociationSyncCompliance
  - withSyncCompliance
```
public AssociationVersionInfo withSyncCompliance(String syncCompliance)
```
    The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    Parameters:
    
    syncCompliance - The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    AssociationSyncCompliance
  - withSyncCompliance
```
public AssociationVersionInfo withSyncCompliance(AssociationSyncCompliance syncCompliance)
```
    The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    Parameters:
    
    syncCompliance - The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.
    
    In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.
    
    By default, all associations use AUTO mode.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    AssociationSyncCompliance
  - setApplyOnlyAtCronInterval
```
public void setApplyOnlyAtCronInterval(Boolean applyOnlyAtCronInterval)
```
    By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
    
    Parameters:
    
    applyOnlyAtCronInterval - By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
  - getApplyOnlyAtCronInterval
```
public Boolean getApplyOnlyAtCronInterval()
```
    By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
    
    Returns:
    
    By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
  - withApplyOnlyAtCronInterval
```
public AssociationVersionInfo withApplyOnlyAtCronInterval(Boolean applyOnlyAtCronInterval)
```
    By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
    
    Parameters:
    
    applyOnlyAtCronInterval - By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - isApplyOnlyAtCronInterval
```
public Boolean isApplyOnlyAtCronInterval()
```
    By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
    
    Returns:
    
    By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
  - getCalendarNames
```
public List<String> getCalendarNames()
```
    The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
    
    Returns:
    
    The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
  - setCalendarNames
```
public void setCalendarNames(Collection<String> calendarNames)
```
    The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
    
    Parameters:
    
    calendarNames - The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
  - withCalendarNames
```
public AssociationVersionInfo withCalendarNames(String... calendarNames)
```
    The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
    
    NOTE: This method appends the values to the existing list (if any). Use setCalendarNames(java.util.Collection) or withCalendarNames(java.util.Collection) if you want to override the existing values.
    
    Parameters:
    
    calendarNames - The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - withCalendarNames
```
public AssociationVersionInfo withCalendarNames(Collection<String> calendarNames)
```
    The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
    
    Parameters:
    
    calendarNames - The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - getTargetLocations
```
public List<TargetLocation> getTargetLocations()
```
    The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
    
    Returns:
    
    The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
  - setTargetLocations
```
public void setTargetLocations(Collection<TargetLocation> targetLocations)
```
    The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
    
    Parameters:
    
    targetLocations - The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
  - withTargetLocations
```
public AssociationVersionInfo withTargetLocations(TargetLocation... targetLocations)
```
    The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
    
    NOTE: This method appends the values to the existing list (if any). Use setTargetLocations(java.util.Collection) or withTargetLocations(java.util.Collection) if you want to override the existing values.
    
    Parameters:
    
    targetLocations - The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - withTargetLocations
```
public AssociationVersionInfo withTargetLocations(Collection<TargetLocation> targetLocations)
```
    The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
    
    Parameters:
    
    targetLocations - The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setScheduleOffset
```
public void setScheduleOffset(Integer scheduleOffset)
```
    Number of days to wait after the scheduled day to run an association.
    
    Parameters:
    
    scheduleOffset - Number of days to wait after the scheduled day to run an association.
  - getScheduleOffset
```
public Integer getScheduleOffset()
```
    Number of days to wait after the scheduled day to run an association.
    
    Returns:
    
    Number of days to wait after the scheduled day to run an association.
  - withScheduleOffset
```
public AssociationVersionInfo withScheduleOffset(Integer scheduleOffset)
```
    Number of days to wait after the scheduled day to run an association.
    
    Parameters:
    
    scheduleOffset - Number of days to wait after the scheduled day to run an association.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setDuration
```
public void setDuration(Integer duration)
```
    The number of hours that an association can run on specified targets. After the resulting cutoff time passes, associations that are currently running are cancelled, and no pending executions are started on remaining targets.
    
    Parameters:
    
    duration - The number of hours that an association can run on specified targets. After the resulting cutoff time passes, associations that are currently running are cancelled, and no pending executions are started on remaining targets.
  - getDuration
```
public Integer getDuration()
```
    The number of hours that an association can run on specified targets. After the resulting cutoff time passes, associations that are currently running are cancelled, and no pending executions are started on remaining targets.
    
    Returns:
    
    The number of hours that an association can run on specified targets. After the resulting cutoff time passes, associations that are currently running are cancelled, and no pending executions are started on remaining targets.
  - withDuration
```
public AssociationVersionInfo withDuration(Integer duration)
```
    The number of hours that an association can run on specified targets. After the resulting cutoff time passes, associations that are currently running are cancelled, and no pending executions are started on remaining targets.
    
    Parameters:
    
    duration - The number of hours that an association can run on specified targets. After the resulting cutoff time passes, associations that are currently running are cancelled, and no pending executions are started on remaining targets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - getTargetMaps
```
public List<Map<String,List<String>>> getTargetMaps()
```
    A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
    
    Returns:
    
    A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
  - setTargetMaps
```
public void setTargetMaps(Collection<Map<String,List<String>>> targetMaps)
```
    A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
    
    Parameters:
    
    targetMaps - A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
  - withTargetMaps
```
public AssociationVersionInfo withTargetMaps(Map<String,List<String>>... targetMaps)
```
    A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
    
    NOTE: This method appends the values to the existing list (if any). Use setTargetMaps(java.util.Collection) or withTargetMaps(java.util.Collection) if you want to override the existing values.
    
    Parameters:
    
    targetMaps - A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - withTargetMaps
```
public AssociationVersionInfo withTargetMaps(Collection<Map<String,List<String>>> targetMaps)
```
    A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
    
    Parameters:
    
    targetMaps - A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - toString
```
public String toString()
```
    Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
    
    Overrides:
    
    toString in class Object
    
    Returns:
    
    A string representation of this object.
    
    See Also:
    
    Object.toString()
  - equals
```
public boolean equals(Object obj)
```
    Overrides:
    
    equals in class Object
  - hashCode
```
public int hashCode()
```
    Overrides:
    
    hashCode in class Object
  - clone
```
public AssociationVersionInfo clone()
```
    Overrides:
    
    clone in class Object
  - marshall
```
public void marshall(ProtocolMarshaller protocolMarshaller)
```
    Description copied from interface: StructuredPojo
    
    Marshalls this structured data using the given ProtocolMarshaller.
    
    Specified by:
    
    marshall in interface StructuredPojo
    
    Parameters:
    
    protocolMarshaller - Implementation of ProtocolMarshaller used to marshall this object's data.

AWS SDK for Java 1.x API Reference - 1.12.793

Class AssociationVersionInfo

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

AssociationVersionInfo

Method Detail

setAssociationId

getAssociationId

withAssociationId

setAssociationVersion

getAssociationVersion

withAssociationVersion

setCreatedDate

getCreatedDate

withCreatedDate

setName

getName

withName

setDocumentVersion

getDocumentVersion

withDocumentVersion

getParameters

setParameters

withParameters

addParametersEntry

clearParametersEntries

getTargets

setTargets

withTargets

withTargets

setScheduleExpression

getScheduleExpression

withScheduleExpression

setOutputLocation

getOutputLocation

withOutputLocation

setAssociationName

getAssociationName

withAssociationName

setMaxErrors

getMaxErrors

withMaxErrors

setMaxConcurrency

getMaxConcurrency

withMaxConcurrency

setComplianceSeverity

getComplianceSeverity

withComplianceSeverity

withComplianceSeverity

setSyncCompliance

getSyncCompliance

withSyncCompliance

withSyncCompliance

setApplyOnlyAtCronInterval

getApplyOnlyAtCronInterval

withApplyOnlyAtCronInterval

isApplyOnlyAtCronInterval

getCalendarNames

setCalendarNames

withCalendarNames

withCalendarNames

getTargetLocations

setTargetLocations

withTargetLocations

withTargetLocations

setScheduleOffset

getScheduleOffset

withScheduleOffset

setDuration

getDuration

withDuration

getTargetMaps

setTargetMaps

withTargetMaps

withTargetMaps

toString

equals

hashCode