Interface CfnReplicationGroupProps

All Superinterfaces:
All Known Implementing Classes:

@Generated(value="jsii-pacmak/1.84.0 (build 5404dcf)", date="2023-06-19T16:29:56.484Z") @Stability(Stable) public interface CfnReplicationGroupProps extends
Properties for defining a CfnReplicationGroup.


 // The code below shows an example of how to instantiate this type.
 // The values are placeholders you should change.
 CfnReplicationGroupProps cfnReplicationGroupProps = CfnReplicationGroupProps.builder()
         // the properties below are optional
  • Method Details

    • getReplicationGroupDescription

      @Stability(Stable) @NotNull String getReplicationGroupDescription()
      A user-created description for the replication group.
    • getAtRestEncryptionEnabled

      @Stability(Stable) @Nullable default Object getAtRestEncryptionEnabled()
      A flag that enables encryption at rest when set to true .

      You cannot modify the value of AtRestEncryptionEnabled after the replication group is created. To enable encryption at rest on a replication group you must set AtRestEncryptionEnabled to true when you create the replication group.

      Required: Only available when creating a replication group in an Amazon VPC using redis version 3.2.6 or 4.x onward.

      Default: false

    • getAuthToken

      @Stability(Stable) @Nullable default String getAuthToken()
      Reserved parameter. The password used to access a password protected server.

      AuthToken can be specified only on replication groups where TransitEncryptionEnabled is true . For more information, see Authenticating Users with the Redis AUTH Command .

      For HIPAA compliance, you must specify TransitEncryptionEnabled as true , an AuthToken , and a CacheSubnetGroup .

      Password constraints:

      • Must be only printable ASCII characters.
      • Must be at least 16 characters and no more than 128 characters in length.
      • Nonalphanumeric characters are restricted to (!, &, #, $, ^, <, >, -, ).

      For more information, see AUTH password at

      If ADDING the AuthToken, update requires Replacement .

    • getAutomaticFailoverEnabled

      @Stability(Stable) @Nullable default Object getAutomaticFailoverEnabled()
      Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails.

      AutomaticFailoverEnabled must be enabled for Redis (cluster mode enabled) replication groups.

      Default: false

    • getAutoMinorVersionUpgrade

      @Stability(Stable) @Nullable default Object getAutoMinorVersionUpgrade()
      If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
    • getCacheNodeType

      @Stability(Stable) @Nullable default String getCacheNodeType()
      The compute and memory capacity of the nodes in the node group (shard).

      The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.

      • General purpose:
      • Current generation:

      M6g node types: cache.m6g.large , cache.m6g.xlarge , cache.m6g.2xlarge , cache.m6g.4xlarge , cache.m6g.12xlarge , cache.m6g.24xlarge

      M5 node types: cache.m5.large , cache.m5.xlarge , cache.m5.2xlarge , cache.m5.4xlarge , cache.m5.12xlarge , cache.m5.24xlarge

      M4 node types: cache.m4.large , cache.m4.xlarge , cache.m4.2xlarge , cache.m4.4xlarge , cache.m4.10xlarge

      T4g node types: cache.t4g.micro , cache.t4g.small , cache.t4g.medium

      T3 node types: cache.t3.micro , cache.t3.small , cache.t3.medium

      T2 node types: cache.t2.micro , cache.t2.small , cache.t2.medium

      • Previous generation: (not recommended)

      T1 node types: cache.t1.micro

      M1 node types: cache.m1.small , cache.m1.medium , cache.m1.large , cache.m1.xlarge

      M3 node types: cache.m3.medium , cache.m3.large , cache.m3.xlarge , cache.m3.2xlarge

      • Compute optimized:
      • Previous generation: (not recommended)

      C1 node types: cache.c1.xlarge

      • Memory optimized:
      • Current generation:

      R6gd node types: cache.r6gd.xlarge , cache.r6gd.2xlarge , cache.r6gd.4xlarge , cache.r6gd.8xlarge , cache.r6gd.12xlarge , cache.r6gd.16xlarge

      The r6gd family is available in the following regions: us-east-2 , us-east-1 , us-west-2 , us-west-1 , eu-west-1 , eu-central-1 , ap-northeast-1 , ap-southeast-1 , ap-southeast-2 .

      R6g node types: cache.r6g.large , cache.r6g.xlarge , cache.r6g.2xlarge , cache.r6g.4xlarge , cache.r6g.12xlarge , cache.r6g.24xlarge

      R5 node types: cache.r5.large , cache.r5.xlarge , cache.r5.2xlarge , cache.r5.4xlarge , cache.r5.12xlarge , cache.r5.24xlarge

      R4 node types: cache.r4.large , cache.r4.xlarge , cache.r4.2xlarge , cache.r4.4xlarge , cache.r4.8xlarge , cache.r4.16xlarge

      • Previous generation: (not recommended)

      M2 node types: cache.m2.xlarge , cache.m2.2xlarge , cache.m2.4xlarge

      R3 node types: cache.r3.large , cache.r3.xlarge , cache.r3.2xlarge , cache.r3.4xlarge , cache.r3.8xlarge

      For region availability, see Supported Node Types by Amazon Region

    • getCacheParameterGroupName

      @Stability(Stable) @Nullable default String getCacheParameterGroupName()
      The name of the parameter group to associate with this replication group.

      If this argument is omitted, the default cache parameter group for the specified engine is used.

      If you are running Redis version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name.

      • To create a Redis (cluster mode disabled) replication group, use CacheParameterGroupName=default.redis3.2 .
      • To create a Redis (cluster mode enabled) replication group, use CacheParameterGroupName=default.redis3.2.cluster.on .
    • getCacheSecurityGroupNames

      @Stability(Stable) @Nullable default List<String> getCacheSecurityGroupNames()
      A list of cache security group names to associate with this replication group.
    • getCacheSubnetGroupName

      @Stability(Stable) @Nullable default String getCacheSubnetGroupName()
      The name of the cache subnet group to be used for the replication group.

      If you're going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see AWS::ElastiCache::SubnetGroup .

    • getClusterMode

      @Stability(Stable) @Nullable default String getClusterMode()
      Enabled or Disabled.

      To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see Modify cluster mode .

    • getDataTieringEnabled

      @Stability(Stable) @Nullable default Object getDataTieringEnabled()
      Enables data tiering.

      Data tiering is only supported for replication groups using the r6gd node type. This parameter must be set to true when using r6gd nodes. For more information, see Data tiering .

    • getEngine

      @Stability(Stable) @Nullable default String getEngine()
      The name of the cache engine to be used for the clusters in this replication group.

      The value must be set to Redis .

    • getEngineVersion

      @Stability(Stable) @Nullable default String getEngineVersion()
      The version number of the cache engine to be used for the clusters in this replication group.

      To view the supported cache engine versions, use the DescribeCacheEngineVersions operation.

      Important: You can upgrade to a newer engine version (see Selecting a Cache Engine and Version ) in the ElastiCache User Guide , but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.

    • getGlobalReplicationGroupId

      @Stability(Stable) @Nullable default String getGlobalReplicationGroupId()
      The name of the Global datastore.
    • getIpDiscovery

      @Stability(Stable) @Nullable default String getIpDiscovery()
      The network type you choose when creating a replication group, either ipv4 | ipv6 .

      IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system .

    • getKmsKeyId

      @Stability(Stable) @Nullable default String getKmsKeyId()
      The ID of the KMS key used to encrypt the disk on the cluster.
    • getLogDeliveryConfigurations

      @Stability(Stable) @Nullable default Object getLogDeliveryConfigurations()
      Specifies the destination, format and type of the logs.
    • getMultiAzEnabled

      @Stability(Stable) @Nullable default Object getMultiAzEnabled()
      A flag indicating if you have Multi-AZ enabled to enhance fault tolerance.

      For more information, see Minimizing Downtime: Multi-AZ .

    • getNetworkType

      @Stability(Stable) @Nullable default String getNetworkType()
      Must be either ipv4 | ipv6 | dual_stack .

      IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system .

    • getNodeGroupConfiguration

      @Stability(Stable) @Nullable default Object getNodeGroupConfiguration()
      NodeGroupConfiguration is a property of the AWS::ElastiCache::ReplicationGroup resource that configures an Amazon ElastiCache (ElastiCache) Redis cluster node group.

      If you set UseOnlineResharding to true , you can update NodeGroupConfiguration without interruption. When UseOnlineResharding is set to false , or is not specified, updating NodeGroupConfiguration results in replacement .

    • getNotificationTopicArn

      @Stability(Stable) @Nullable default String getNotificationTopicArn()
      The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent.

      The Amazon SNS topic owner must be the same as the cluster owner.

    • getNumCacheClusters

      @Stability(Stable) @Nullable default Number getNumCacheClusters()
      The number of clusters this replication group initially has.

      This parameter is not used if there is more than one node group (shard). You should use ReplicasPerNodeGroup instead.

      If AutomaticFailoverEnabled is true , the value of this parameter must be at least 2. If AutomaticFailoverEnabled is false you can omit this parameter (it will default to 1), or you can explicitly set it to a value between 2 and 6.

      The maximum permitted value for NumCacheClusters is 6 (1 primary plus 5 replicas).

    • getNumNodeGroups

      @Stability(Stable) @Nullable default Number getNumNodeGroups()
      An optional parameter that specifies the number of node groups (shards) for this Redis (cluster mode enabled) replication group.

      For Redis (cluster mode disabled) either omit this parameter or set it to 1.

      If you set UseOnlineResharding to true , you can update NumNodeGroups without interruption. When UseOnlineResharding is set to false , or is not specified, updating NumNodeGroups results in replacement .

      Default: 1

    • getPort

      @Stability(Stable) @Nullable default Number getPort()
      The port number on which each member of the replication group accepts connections.
    • getPreferredCacheClusterAZs

      @Stability(Stable) @Nullable default List<String> getPreferredCacheClusterAZs()
      A list of EC2 Availability Zones in which the replication group's clusters are created.

      The order of the Availability Zones in the list is the order in which clusters are allocated. The primary cluster is created in the first AZ in the list.

      This parameter is not used if there is more than one node group (shard). You should use NodeGroupConfiguration instead.

      If you are creating your replication group in an Amazon VPC (recommended), you can only locate clusters in Availability Zones associated with the subnets in the selected subnet group.

      The number of Availability Zones listed must equal the value of NumCacheClusters .

      Default: system chosen Availability Zones.

    • getPreferredMaintenanceWindow

      @Stability(Stable) @Nullable default String getPreferredMaintenanceWindow()
      Specifies the weekly time range during which maintenance on the cluster is performed.

      It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period.

      Valid values for ddd are:

      • sun
      • mon
      • tue
      • wed
      • thu
      • fri
      • sat

      Example: sun:23:00-mon:01:30

    • getPrimaryClusterId

      @Stability(Stable) @Nullable default String getPrimaryClusterId()
      The identifier of the cluster that serves as the primary for this replication group.

      This cluster must already exist and have a status of available .

      This parameter is not required if NumCacheClusters , NumNodeGroups , or ReplicasPerNodeGroup is specified.

    • getReplicasPerNodeGroup

      @Stability(Stable) @Nullable default Number getReplicasPerNodeGroup()
      An optional parameter that specifies the number of replica nodes in each node group (shard).

      Valid values are 0 to 5.

    • getReplicationGroupId

      @Stability(Stable) @Nullable default String getReplicationGroupId()
      The replication group identifier. This parameter is stored as a lowercase string.


      • A name must contain from 1 to 40 alphanumeric characters or hyphens.
      • The first character must be a letter.
      • A name cannot end with a hyphen or contain two consecutive hyphens.
    • getSecurityGroupIds

      @Stability(Stable) @Nullable default List<String> getSecurityGroupIds()
      One or more Amazon VPC security groups associated with this replication group.

      Use this parameter only when you are creating a replication group in an Amazon Virtual Private Cloud (Amazon VPC).

    • getSnapshotArns

      @Stability(Stable) @Nullable default List<String> getSnapshotArns()
      A list of Amazon Resource Names (ARN) that uniquely identify the Redis RDB snapshot files stored in Amazon S3.

      The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter NumNodeGroups or the number of node groups configured by NodeGroupConfiguration regardless of the number of ARNs specified here.

      Example of an Amazon S3 ARN: arn:aws:s3:::my_bucket/snapshot1.rdb

    • getSnapshotName

      @Stability(Stable) @Nullable default String getSnapshotName()
      The name of a snapshot from which to restore data into the new replication group.

      The snapshot status changes to restoring while the new replication group is being created.

    • getSnapshotRetentionLimit

      @Stability(Stable) @Nullable default Number getSnapshotRetentionLimit()
      The number of days for which ElastiCache retains automatic snapshots before deleting them.

      For example, if you set SnapshotRetentionLimit to 5, a snapshot that was taken today is retained for 5 days before being deleted.

      Default: 0 (i.e., automatic backups are disabled for this cluster).

    • getSnapshottingClusterId

      @Stability(Stable) @Nullable default String getSnapshottingClusterId()
      The cluster ID that is used as the daily snapshot source for the replication group.

      This parameter cannot be set for Redis (cluster mode enabled) replication groups.

    • getSnapshotWindow

      @Stability(Stable) @Nullable default String getSnapshotWindow()
      The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard).

      Example: 05:00-09:00

      If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range.

    • getTags

      @Stability(Stable) @Nullable default List<CfnTag> getTags()
      A list of tags to be added to this resource.

      Tags are comma-separated key,value pairs (e.g. Key= myKey , Value= myKeyValue . You can include multiple tags as shown following: Key= myKey , Value= myKeyValue Key= mySecondKey , Value= mySecondKeyValue . Tags on replication groups will be replicated to all nodes.

    • getTransitEncryptionEnabled

      @Stability(Stable) @Nullable default Object getTransitEncryptionEnabled()
      A flag that enables in-transit encryption when set to true .

      You cannot modify the value of TransitEncryptionEnabled after the cluster is created. To enable in-transit encryption on a cluster you must set TransitEncryptionEnabled to true when you create a cluster.

      This parameter is valid only if the Engine parameter is redis , the EngineVersion parameter is 3.2.6 or 4.x onward, and the cluster is being created in an Amazon VPC.

      If you enable in-transit encryption, you must also specify a value for CacheSubnetGroup .

      Required: Only available when creating a replication group in an Amazon VPC using redis version 3.2.6 or 4.x onward.

      Default: false

      For HIPAA compliance, you must specify TransitEncryptionEnabled as true , an AuthToken , and a CacheSubnetGroup .

    • getTransitEncryptionMode

      @Stability(Stable) @Nullable default String getTransitEncryptionMode()
      A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.

      When setting TransitEncryptionEnabled to true , you can set your TransitEncryptionMode to preferred in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis clients to use encrypted connections you can modify the value to required to allow encrypted connections only.

      Setting TransitEncryptionMode to required is a two-step process that requires you to first set the TransitEncryptionMode to preferred , after that you can set TransitEncryptionMode to required .

      This process will not trigger the replacement of the replication group.

    • getUserGroupIds

      @Stability(Stable) @Nullable default List<String> getUserGroupIds()
      The ID of user group to associate with the replication group.
    • builder

      @Stability(Stable) static CfnReplicationGroupProps.Builder builder()
      a CfnReplicationGroupProps.Builder of CfnReplicationGroupProps