H265Settings (AWS SDK for Java

java.lang.Object
- com.amazonaws.services.mediaconvert.model.H265Settings

All Implemented Interfaces:: StructuredPojo, Serializable, Cloneable

@Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class H265Settings
extends Object
implements Serializable, Cloneable, StructuredPojo

Settings for H265 codec

See Also:: AWS API Documentation, Serialized Form

Constructor Summary

Constructors
Constructor and Description

H265Settings()

Constructors
Constructor and Description
`H265Settings()`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`H265Settings`	`clone()`
`boolean`	`equals(Object obj)`
`String`	`getAdaptiveQuantization()` When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output.
`String`	`getAlternateTransferFunctionSei()` Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
`BandwidthReductionFilter`	`getBandwidthReductionFilter()` The Bandwidth reduction filter increases the video quality of your output relative to its bitrate.
`Integer`	`getBitrate()` Specify the average bitrate in bits per second.
`String`	`getCodecLevel()` H.265 Level.
`String`	`getCodecProfile()` Represents the Profile and Tier, per the HEVC (H.265) specification.
`String`	`getDynamicSubGop()` Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content.
`String`	`getEndOfStreamMarkers()` Optionally include or suppress markers at the end of your output that signal the end of the video stream.
`String`	`getFlickerAdaptiveQuantization()` Enable this setting to have the encoder reduce I-frame pop.
`String`	`getFramerateControl()` Use the Framerate setting to specify the frame rate for this output.
`String`	`getFramerateConversionAlgorithm()` Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
`Integer`	`getFramerateDenominator()` When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
`Integer`	`getFramerateNumerator()` When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
`String`	`getGopBReference()` Specify whether to allow B-frames to be referenced by other frame types.
`Integer`	`getGopClosedCadence()` Specify the relative frequency of open to closed GOPs in this output.
`Double`	`getGopSize()` Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds.
`String`	`getGopSizeUnits()` Specify how the transcoder determines GOP size for this output.
`Integer`	`getHrdBufferFinalFillPercentage()` If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment.
`Integer`	`getHrdBufferInitialFillPercentage()` Percentage of the buffer that should initially be filled (HRD buffer model).
`Integer`	`getHrdBufferSize()` Size of buffer (HRD buffer model) in bits.
`String`	`getInterlaceMode()` Choose the scan line type for the output.
`Integer`	`getMaxBitrate()` Maximum bitrate in bits/second.
`Integer`	`getMinIInterval()` Use this setting only when you also enable Scene change detection.
`Integer`	`getNumberBFramesBetweenReferenceFrames()` Specify the number of B-frames between reference frames in this output.
`Integer`	`getNumberReferenceFrames()` Number of reference frames to use.
`String`	`getParControl()` Optional.
`Integer`	`getParDenominator()` Required when you set Pixel aspect ratio to SPECIFIED.
`Integer`	`getParNumerator()` Required when you set Pixel aspect ratio to SPECIFIED.
`String`	`getQualityTuningLevel()` Optional.
`H265QvbrSettings`	`getQvbrSettings()` Settings for quality-defined variable bitrate encoding with the H.265 codec.
`String`	`getRateControlMode()` Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
`String`	`getSampleAdaptiveOffsetFilterMode()` Specify Sample Adaptive Offset (SAO) filter strength.
`String`	`getScanTypeConversionMode()` Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
`String`	`getSceneChangeDetect()` Enable this setting to insert I-frames at scene changes that the service automatically detects.
`Integer`	`getSlices()` Number of slices per picture.
`String`	`getSlowPal()` Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
`String`	`getSpatialAdaptiveQuantization()` Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity.
`String`	`getTelecine()` This field applies only if the Streams > Advanced > Framerate field is set to 29.970.
`String`	`getTemporalAdaptiveQuantization()` Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity.
`String`	`getTemporalIds()` Enables temporal layer identifiers in the encoded bitstream.
`String`	`getTiles()` Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
`String`	`getUnregisteredSeiTimecode()` Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
`String`	`getWriteMp4PackagingType()` If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting.
`int`	`hashCode()`
`void`	`marshall(ProtocolMarshaller protocolMarshaller)` Marshalls this structured data using the given `ProtocolMarshaller`.
`void`	`setAdaptiveQuantization(String adaptiveQuantization)` When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output.
`void`	`setAlternateTransferFunctionSei(String alternateTransferFunctionSei)` Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
`void`	`setBandwidthReductionFilter(BandwidthReductionFilter bandwidthReductionFilter)` The Bandwidth reduction filter increases the video quality of your output relative to its bitrate.
`void`	`setBitrate(Integer bitrate)` Specify the average bitrate in bits per second.
`void`	`setCodecLevel(String codecLevel)` H.265 Level.
`void`	`setCodecProfile(String codecProfile)` Represents the Profile and Tier, per the HEVC (H.265) specification.
`void`	`setDynamicSubGop(String dynamicSubGop)` Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content.
`void`	`setEndOfStreamMarkers(String endOfStreamMarkers)` Optionally include or suppress markers at the end of your output that signal the end of the video stream.
`void`	`setFlickerAdaptiveQuantization(String flickerAdaptiveQuantization)` Enable this setting to have the encoder reduce I-frame pop.
`void`	`setFramerateControl(String framerateControl)` Use the Framerate setting to specify the frame rate for this output.
`void`	`setFramerateConversionAlgorithm(String framerateConversionAlgorithm)` Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
`void`	`setFramerateDenominator(Integer framerateDenominator)` When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
`void`	`setFramerateNumerator(Integer framerateNumerator)` When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
`void`	`setGopBReference(String gopBReference)` Specify whether to allow B-frames to be referenced by other frame types.
`void`	`setGopClosedCadence(Integer gopClosedCadence)` Specify the relative frequency of open to closed GOPs in this output.
`void`	`setGopSize(Double gopSize)` Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds.
`void`	`setGopSizeUnits(String gopSizeUnits)` Specify how the transcoder determines GOP size for this output.
`void`	`setHrdBufferFinalFillPercentage(Integer hrdBufferFinalFillPercentage)` If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment.
`void`	`setHrdBufferInitialFillPercentage(Integer hrdBufferInitialFillPercentage)` Percentage of the buffer that should initially be filled (HRD buffer model).
`void`	`setHrdBufferSize(Integer hrdBufferSize)` Size of buffer (HRD buffer model) in bits.
`void`	`setInterlaceMode(String interlaceMode)` Choose the scan line type for the output.
`void`	`setMaxBitrate(Integer maxBitrate)` Maximum bitrate in bits/second.
`void`	`setMinIInterval(Integer minIInterval)` Use this setting only when you also enable Scene change detection.
`void`	`setNumberBFramesBetweenReferenceFrames(Integer numberBFramesBetweenReferenceFrames)` Specify the number of B-frames between reference frames in this output.
`void`	`setNumberReferenceFrames(Integer numberReferenceFrames)` Number of reference frames to use.
`void`	`setParControl(String parControl)` Optional.
`void`	`setParDenominator(Integer parDenominator)` Required when you set Pixel aspect ratio to SPECIFIED.
`void`	`setParNumerator(Integer parNumerator)` Required when you set Pixel aspect ratio to SPECIFIED.
`void`	`setQualityTuningLevel(String qualityTuningLevel)` Optional.
`void`	`setQvbrSettings(H265QvbrSettings qvbrSettings)` Settings for quality-defined variable bitrate encoding with the H.265 codec.
`void`	`setRateControlMode(String rateControlMode)` Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
`void`	`setSampleAdaptiveOffsetFilterMode(String sampleAdaptiveOffsetFilterMode)` Specify Sample Adaptive Offset (SAO) filter strength.
`void`	`setScanTypeConversionMode(String scanTypeConversionMode)` Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
`void`	`setSceneChangeDetect(String sceneChangeDetect)` Enable this setting to insert I-frames at scene changes that the service automatically detects.
`void`	`setSlices(Integer slices)` Number of slices per picture.
`void`	`setSlowPal(String slowPal)` Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
`void`	`setSpatialAdaptiveQuantization(String spatialAdaptiveQuantization)` Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity.
`void`	`setTelecine(String telecine)` This field applies only if the Streams > Advanced > Framerate field is set to 29.970.
`void`	`setTemporalAdaptiveQuantization(String temporalAdaptiveQuantization)` Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity.
`void`	`setTemporalIds(String temporalIds)` Enables temporal layer identifiers in the encoded bitstream.
`void`	`setTiles(String tiles)` Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
`void`	`setUnregisteredSeiTimecode(String unregisteredSeiTimecode)` Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
`void`	`setWriteMp4PackagingType(String writeMp4PackagingType)` If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting.
`String`	`toString()` Returns a string representation of this object.
`H265Settings`	`withAdaptiveQuantization(H265AdaptiveQuantization adaptiveQuantization)` When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output.
`H265Settings`	`withAdaptiveQuantization(String adaptiveQuantization)` When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output.
`H265Settings`	`withAlternateTransferFunctionSei(H265AlternateTransferFunctionSei alternateTransferFunctionSei)` Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
`H265Settings`	`withAlternateTransferFunctionSei(String alternateTransferFunctionSei)` Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
`H265Settings`	`withBandwidthReductionFilter(BandwidthReductionFilter bandwidthReductionFilter)` The Bandwidth reduction filter increases the video quality of your output relative to its bitrate.
`H265Settings`	`withBitrate(Integer bitrate)` Specify the average bitrate in bits per second.
`H265Settings`	`withCodecLevel(H265CodecLevel codecLevel)` H.265 Level.
`H265Settings`	`withCodecLevel(String codecLevel)` H.265 Level.
`H265Settings`	`withCodecProfile(H265CodecProfile codecProfile)` Represents the Profile and Tier, per the HEVC (H.265) specification.
`H265Settings`	`withCodecProfile(String codecProfile)` Represents the Profile and Tier, per the HEVC (H.265) specification.
`H265Settings`	`withDynamicSubGop(H265DynamicSubGop dynamicSubGop)` Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content.
`H265Settings`	`withDynamicSubGop(String dynamicSubGop)` Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content.
`H265Settings`	`withEndOfStreamMarkers(H265EndOfStreamMarkers endOfStreamMarkers)` Optionally include or suppress markers at the end of your output that signal the end of the video stream.
`H265Settings`	`withEndOfStreamMarkers(String endOfStreamMarkers)` Optionally include or suppress markers at the end of your output that signal the end of the video stream.
`H265Settings`	`withFlickerAdaptiveQuantization(H265FlickerAdaptiveQuantization flickerAdaptiveQuantization)` Enable this setting to have the encoder reduce I-frame pop.
`H265Settings`	`withFlickerAdaptiveQuantization(String flickerAdaptiveQuantization)` Enable this setting to have the encoder reduce I-frame pop.
`H265Settings`	`withFramerateControl(H265FramerateControl framerateControl)` Use the Framerate setting to specify the frame rate for this output.
`H265Settings`	`withFramerateControl(String framerateControl)` Use the Framerate setting to specify the frame rate for this output.
`H265Settings`	`withFramerateConversionAlgorithm(H265FramerateConversionAlgorithm framerateConversionAlgorithm)` Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
`H265Settings`	`withFramerateConversionAlgorithm(String framerateConversionAlgorithm)` Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
`H265Settings`	`withFramerateDenominator(Integer framerateDenominator)` When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
`H265Settings`	`withFramerateNumerator(Integer framerateNumerator)` When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
`H265Settings`	`withGopBReference(H265GopBReference gopBReference)` Specify whether to allow B-frames to be referenced by other frame types.
`H265Settings`	`withGopBReference(String gopBReference)` Specify whether to allow B-frames to be referenced by other frame types.
`H265Settings`	`withGopClosedCadence(Integer gopClosedCadence)` Specify the relative frequency of open to closed GOPs in this output.
`H265Settings`	`withGopSize(Double gopSize)` Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds.
`H265Settings`	`withGopSizeUnits(H265GopSizeUnits gopSizeUnits)` Specify how the transcoder determines GOP size for this output.
`H265Settings`	`withGopSizeUnits(String gopSizeUnits)` Specify how the transcoder determines GOP size for this output.
`H265Settings`	`withHrdBufferFinalFillPercentage(Integer hrdBufferFinalFillPercentage)` If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment.
`H265Settings`	`withHrdBufferInitialFillPercentage(Integer hrdBufferInitialFillPercentage)` Percentage of the buffer that should initially be filled (HRD buffer model).
`H265Settings`	`withHrdBufferSize(Integer hrdBufferSize)` Size of buffer (HRD buffer model) in bits.
`H265Settings`	`withInterlaceMode(H265InterlaceMode interlaceMode)` Choose the scan line type for the output.
`H265Settings`	`withInterlaceMode(String interlaceMode)` Choose the scan line type for the output.
`H265Settings`	`withMaxBitrate(Integer maxBitrate)` Maximum bitrate in bits/second.
`H265Settings`	`withMinIInterval(Integer minIInterval)` Use this setting only when you also enable Scene change detection.
`H265Settings`	`withNumberBFramesBetweenReferenceFrames(Integer numberBFramesBetweenReferenceFrames)` Specify the number of B-frames between reference frames in this output.
`H265Settings`	`withNumberReferenceFrames(Integer numberReferenceFrames)` Number of reference frames to use.
`H265Settings`	`withParControl(H265ParControl parControl)` Optional.
`H265Settings`	`withParControl(String parControl)` Optional.
`H265Settings`	`withParDenominator(Integer parDenominator)` Required when you set Pixel aspect ratio to SPECIFIED.
`H265Settings`	`withParNumerator(Integer parNumerator)` Required when you set Pixel aspect ratio to SPECIFIED.
`H265Settings`	`withQualityTuningLevel(H265QualityTuningLevel qualityTuningLevel)` Optional.
`H265Settings`	`withQualityTuningLevel(String qualityTuningLevel)` Optional.
`H265Settings`	`withQvbrSettings(H265QvbrSettings qvbrSettings)` Settings for quality-defined variable bitrate encoding with the H.265 codec.
`H265Settings`	`withRateControlMode(H265RateControlMode rateControlMode)` Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
`H265Settings`	`withRateControlMode(String rateControlMode)` Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
`H265Settings`	`withSampleAdaptiveOffsetFilterMode(H265SampleAdaptiveOffsetFilterMode sampleAdaptiveOffsetFilterMode)` Specify Sample Adaptive Offset (SAO) filter strength.
`H265Settings`	`withSampleAdaptiveOffsetFilterMode(String sampleAdaptiveOffsetFilterMode)` Specify Sample Adaptive Offset (SAO) filter strength.
`H265Settings`	`withScanTypeConversionMode(H265ScanTypeConversionMode scanTypeConversionMode)` Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
`H265Settings`	`withScanTypeConversionMode(String scanTypeConversionMode)` Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
`H265Settings`	`withSceneChangeDetect(H265SceneChangeDetect sceneChangeDetect)` Enable this setting to insert I-frames at scene changes that the service automatically detects.
`H265Settings`	`withSceneChangeDetect(String sceneChangeDetect)` Enable this setting to insert I-frames at scene changes that the service automatically detects.
`H265Settings`	`withSlices(Integer slices)` Number of slices per picture.
`H265Settings`	`withSlowPal(H265SlowPal slowPal)` Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
`H265Settings`	`withSlowPal(String slowPal)` Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
`H265Settings`	`withSpatialAdaptiveQuantization(H265SpatialAdaptiveQuantization spatialAdaptiveQuantization)` Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity.
`H265Settings`	`withSpatialAdaptiveQuantization(String spatialAdaptiveQuantization)` Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity.
`H265Settings`	`withTelecine(H265Telecine telecine)` This field applies only if the Streams > Advanced > Framerate field is set to 29.970.
`H265Settings`	`withTelecine(String telecine)` This field applies only if the Streams > Advanced > Framerate field is set to 29.970.
`H265Settings`	`withTemporalAdaptiveQuantization(H265TemporalAdaptiveQuantization temporalAdaptiveQuantization)` Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity.
`H265Settings`	`withTemporalAdaptiveQuantization(String temporalAdaptiveQuantization)` Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity.
`H265Settings`	`withTemporalIds(H265TemporalIds temporalIds)` Enables temporal layer identifiers in the encoded bitstream.
`H265Settings`	`withTemporalIds(String temporalIds)` Enables temporal layer identifiers in the encoded bitstream.
`H265Settings`	`withTiles(H265Tiles tiles)` Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
`H265Settings`	`withTiles(String tiles)` Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
`H265Settings`	`withUnregisteredSeiTimecode(H265UnregisteredSeiTimecode unregisteredSeiTimecode)` Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
`H265Settings`	`withUnregisteredSeiTimecode(String unregisteredSeiTimecode)` Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
`H265Settings`	`withWriteMp4PackagingType(H265WriteMp4PackagingType writeMp4PackagingType)` If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting.
`H265Settings`	`withWriteMp4PackagingType(String writeMp4PackagingType)` If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting.

Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait

- Constructor Detail
  - H265Settings
```
public H265Settings()
```
- Method Detail
  - setAdaptiveQuantization
```
public void setAdaptiveQuantization(String adaptiveQuantization)
```
    When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    Parameters:
    
    adaptiveQuantization - When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    See Also:
    
    H265AdaptiveQuantization
  - getAdaptiveQuantization
```
public String getAdaptiveQuantization()
```
    When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    Returns:
    
    When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    See Also:
    
    H265AdaptiveQuantization
  - withAdaptiveQuantization
```
public H265Settings withAdaptiveQuantization(String adaptiveQuantization)
```
    When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    Parameters:
    
    adaptiveQuantization - When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265AdaptiveQuantization
  - withAdaptiveQuantization
```
public H265Settings withAdaptiveQuantization(H265AdaptiveQuantization adaptiveQuantization)
```
    When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    Parameters:
    
    adaptiveQuantization - When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265AdaptiveQuantization
  - setAlternateTransferFunctionSei
```
public void setAlternateTransferFunctionSei(String alternateTransferFunctionSei)
```
    Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    Parameters:
    
    alternateTransferFunctionSei - Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    See Also:
    
    H265AlternateTransferFunctionSei
  - getAlternateTransferFunctionSei
```
public String getAlternateTransferFunctionSei()
```
    Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    Returns:
    
    Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    See Also:
    
    H265AlternateTransferFunctionSei
  - withAlternateTransferFunctionSei
```
public H265Settings withAlternateTransferFunctionSei(String alternateTransferFunctionSei)
```
    Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    Parameters:
    
    alternateTransferFunctionSei - Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265AlternateTransferFunctionSei
  - withAlternateTransferFunctionSei
```
public H265Settings withAlternateTransferFunctionSei(H265AlternateTransferFunctionSei alternateTransferFunctionSei)
```
    Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    Parameters:
    
    alternateTransferFunctionSei - Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265AlternateTransferFunctionSei
  - setBandwidthReductionFilter
```
public void setBandwidthReductionFilter(BandwidthReductionFilter bandwidthReductionFilter)
```
    The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.
    
    Parameters:
    
    bandwidthReductionFilter - The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.
  - getBandwidthReductionFilter
```
public BandwidthReductionFilter getBandwidthReductionFilter()
```
    The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.
    
    Returns:
    
    The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.
  - withBandwidthReductionFilter
```
public H265Settings withBandwidthReductionFilter(BandwidthReductionFilter bandwidthReductionFilter)
```
    The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.
    
    Parameters:
    
    bandwidthReductionFilter - The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setBitrate
```
public void setBitrate(Integer bitrate)
```
    Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
    
    Parameters:
    
    bitrate - Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
  - getBitrate
```
public Integer getBitrate()
```
    Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
    
    Returns:
    
    Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
  - withBitrate
```
public H265Settings withBitrate(Integer bitrate)
```
    Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
    
    Parameters:
    
    bitrate - Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setCodecLevel
```
public void setCodecLevel(String codecLevel)
```
    H.265 Level.
    
    Parameters:
    
    codecLevel - H.265 Level.
    
    See Also:
    
    H265CodecLevel
  - getCodecLevel
```
public String getCodecLevel()
```
    H.265 Level.
    
    Returns:
    
    H.265 Level.
    
    See Also:
    
    H265CodecLevel
  - withCodecLevel
```
public H265Settings withCodecLevel(String codecLevel)
```
    H.265 Level.
    
    Parameters:
    
    codecLevel - H.265 Level.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265CodecLevel
  - withCodecLevel
```
public H265Settings withCodecLevel(H265CodecLevel codecLevel)
```
    H.265 Level.
    
    Parameters:
    
    codecLevel - H.265 Level.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265CodecLevel
  - setCodecProfile
```
public void setCodecProfile(String codecProfile)
```
    Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    Parameters:
    
    codecProfile - Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    See Also:
    
    H265CodecProfile
  - getCodecProfile
```
public String getCodecProfile()
```
    Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    Returns:
    
    Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    See Also:
    
    H265CodecProfile
  - withCodecProfile
```
public H265Settings withCodecProfile(String codecProfile)
```
    Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    Parameters:
    
    codecProfile - Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265CodecProfile
  - withCodecProfile
```
public H265Settings withCodecProfile(H265CodecProfile codecProfile)
```
    Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    Parameters:
    
    codecProfile - Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265CodecProfile
  - setDynamicSubGop
```
public void setDynamicSubGop(String dynamicSubGop)
```
    Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    Parameters:
    
    dynamicSubGop - Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    See Also:
    
    H265DynamicSubGop
  - getDynamicSubGop
```
public String getDynamicSubGop()
```
    Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    Returns:
    
    Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    See Also:
    
    H265DynamicSubGop
  - withDynamicSubGop
```
public H265Settings withDynamicSubGop(String dynamicSubGop)
```
    Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    Parameters:
    
    dynamicSubGop - Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265DynamicSubGop
  - withDynamicSubGop
```
public H265Settings withDynamicSubGop(H265DynamicSubGop dynamicSubGop)
```
    Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    Parameters:
    
    dynamicSubGop - Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265DynamicSubGop
  - setEndOfStreamMarkers
```
public void setEndOfStreamMarkers(String endOfStreamMarkers)
```
    Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    Parameters:
    
    endOfStreamMarkers - Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    See Also:
    
    H265EndOfStreamMarkers
  - getEndOfStreamMarkers
```
public String getEndOfStreamMarkers()
```
    Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    Returns:
    
    Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    See Also:
    
    H265EndOfStreamMarkers
  - withEndOfStreamMarkers
```
public H265Settings withEndOfStreamMarkers(String endOfStreamMarkers)
```
    Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    Parameters:
    
    endOfStreamMarkers - Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265EndOfStreamMarkers
  - withEndOfStreamMarkers
```
public H265Settings withEndOfStreamMarkers(H265EndOfStreamMarkers endOfStreamMarkers)
```
    Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    Parameters:
    
    endOfStreamMarkers - Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265EndOfStreamMarkers
  - setFlickerAdaptiveQuantization
```
public void setFlickerAdaptiveQuantization(String flickerAdaptiveQuantization)
```
    Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    Parameters:
    
    flickerAdaptiveQuantization - Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    See Also:
    
    H265FlickerAdaptiveQuantization
  - getFlickerAdaptiveQuantization
```
public String getFlickerAdaptiveQuantization()
```
    Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    Returns:
    
    Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    See Also:
    
    H265FlickerAdaptiveQuantization
  - withFlickerAdaptiveQuantization
```
public H265Settings withFlickerAdaptiveQuantization(String flickerAdaptiveQuantization)
```
    Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    Parameters:
    
    flickerAdaptiveQuantization - Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265FlickerAdaptiveQuantization
  - withFlickerAdaptiveQuantization
```
public H265Settings withFlickerAdaptiveQuantization(H265FlickerAdaptiveQuantization flickerAdaptiveQuantization)
```
    Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    Parameters:
    
    flickerAdaptiveQuantization - Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265FlickerAdaptiveQuantization
  - setFramerateControl
```
public void setFramerateControl(String framerateControl)
```
    Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    Parameters:
    
    framerateControl - Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    See Also:
    
    H265FramerateControl
  - getFramerateControl
```
public String getFramerateControl()
```
    Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    Returns:
    
    Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    See Also:
    
    H265FramerateControl
  - withFramerateControl
```
public H265Settings withFramerateControl(String framerateControl)
```
    Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    Parameters:
    
    framerateControl - Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265FramerateControl
  - withFramerateControl
```
public H265Settings withFramerateControl(H265FramerateControl framerateControl)
```
    Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    Parameters:
    
    framerateControl - Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265FramerateControl
  - setFramerateConversionAlgorithm
```
public void setFramerateConversionAlgorithm(String framerateConversionAlgorithm)
```
    Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    Parameters:
    
    framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    See Also:
    
    H265FramerateConversionAlgorithm
  - getFramerateConversionAlgorithm
```
public String getFramerateConversionAlgorithm()
```
    Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    Returns:
    
    Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    See Also:
    
    H265FramerateConversionAlgorithm
  - withFramerateConversionAlgorithm
```
public H265Settings withFramerateConversionAlgorithm(String framerateConversionAlgorithm)
```
    Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    Parameters:
    
    framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265FramerateConversionAlgorithm
  - withFramerateConversionAlgorithm
```
public H265Settings withFramerateConversionAlgorithm(H265FramerateConversionAlgorithm framerateConversionAlgorithm)
```
    Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    Parameters:
    
    framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265FramerateConversionAlgorithm
  - setFramerateDenominator
```
public void setFramerateDenominator(Integer framerateDenominator)
```
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Parameters:
    
    framerateDenominator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
  - getFramerateDenominator
```
public Integer getFramerateDenominator()
```
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Returns:
    
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
  - withFramerateDenominator
```
public H265Settings withFramerateDenominator(Integer framerateDenominator)
```
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Parameters:
    
    framerateDenominator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setFramerateNumerator
```
public void setFramerateNumerator(Integer framerateNumerator)
```
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Parameters:
    
    framerateNumerator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
  - getFramerateNumerator
```
public Integer getFramerateNumerator()
```
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Returns:
    
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
  - withFramerateNumerator
```
public H265Settings withFramerateNumerator(Integer framerateNumerator)
```
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Parameters:
    
    framerateNumerator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setGopBReference
```
public void setGopBReference(String gopBReference)
```
    Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    Parameters:
    
    gopBReference - Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    See Also:
    
    H265GopBReference
  - getGopBReference
```
public String getGopBReference()
```
    Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    Returns:
    
    Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    See Also:
    
    H265GopBReference
  - withGopBReference
```
public H265Settings withGopBReference(String gopBReference)
```
    Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    Parameters:
    
    gopBReference - Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265GopBReference
  - withGopBReference
```
public H265Settings withGopBReference(H265GopBReference gopBReference)
```
    Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    Parameters:
    
    gopBReference - Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265GopBReference
  - setGopClosedCadence
```
public void setGopClosedCadence(Integer gopClosedCadence)
```
    Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.
    
    Parameters:
    
    gopClosedCadence - Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.
  - getGopClosedCadence
```
public Integer getGopClosedCadence()
```
    Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.
    
    Returns:
    
    Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.
  - withGopClosedCadence
```
public H265Settings withGopClosedCadence(Integer gopClosedCadence)
```
    Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.
    
    Parameters:
    
    gopClosedCadence - Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setGopSize
```
public void setGopSize(Double gopSize)
```
    Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.
    
    Parameters:
    
    gopSize - Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.
  - getGopSize
```
public Double getGopSize()
```
    Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.
    
    Returns:
    
    Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.
  - withGopSize
```
public H265Settings withGopSize(Double gopSize)
```
    Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.
    
    Parameters:
    
    gopSize - Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setGopSizeUnits
```
public void setGopSizeUnits(String gopSizeUnits)
```
    Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    Parameters:
    
    gopSizeUnits - Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    See Also:
    
    H265GopSizeUnits
  - getGopSizeUnits
```
public String getGopSizeUnits()
```
    Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    Returns:
    
    Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    See Also:
    
    H265GopSizeUnits
  - withGopSizeUnits
```
public H265Settings withGopSizeUnits(String gopSizeUnits)
```
    Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    Parameters:
    
    gopSizeUnits - Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265GopSizeUnits
  - withGopSizeUnits
```
public H265Settings withGopSizeUnits(H265GopSizeUnits gopSizeUnits)
```
    Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    Parameters:
    
    gopSizeUnits - Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265GopSizeUnits
  - setHrdBufferFinalFillPercentage
```
public void setHrdBufferFinalFillPercentage(Integer hrdBufferFinalFillPercentage)
```
    If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.
    
    Parameters:
    
    hrdBufferFinalFillPercentage - If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.
  - getHrdBufferFinalFillPercentage
```
public Integer getHrdBufferFinalFillPercentage()
```
    If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.
    
    Returns:
    
    If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.
  - withHrdBufferFinalFillPercentage
```
public H265Settings withHrdBufferFinalFillPercentage(Integer hrdBufferFinalFillPercentage)
```
    If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.
    
    Parameters:
    
    hrdBufferFinalFillPercentage - If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setHrdBufferInitialFillPercentage
```
public void setHrdBufferInitialFillPercentage(Integer hrdBufferInitialFillPercentage)
```
    Percentage of the buffer that should initially be filled (HRD buffer model).
    
    Parameters:
    
    hrdBufferInitialFillPercentage - Percentage of the buffer that should initially be filled (HRD buffer model).
  - getHrdBufferInitialFillPercentage
```
public Integer getHrdBufferInitialFillPercentage()
```
    Percentage of the buffer that should initially be filled (HRD buffer model).
    
    Returns:
    
    Percentage of the buffer that should initially be filled (HRD buffer model).
  - withHrdBufferInitialFillPercentage
```
public H265Settings withHrdBufferInitialFillPercentage(Integer hrdBufferInitialFillPercentage)
```
    Percentage of the buffer that should initially be filled (HRD buffer model).
    
    Parameters:
    
    hrdBufferInitialFillPercentage - Percentage of the buffer that should initially be filled (HRD buffer model).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setHrdBufferSize
```
public void setHrdBufferSize(Integer hrdBufferSize)
```
    Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
    
    Parameters:
    
    hrdBufferSize - Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
  - getHrdBufferSize
```
public Integer getHrdBufferSize()
```
    Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
    
    Returns:
    
    Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
  - withHrdBufferSize
```
public H265Settings withHrdBufferSize(Integer hrdBufferSize)
```
    Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
    
    Parameters:
    
    hrdBufferSize - Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setInterlaceMode
```
public void setInterlaceMode(String interlaceMode)
```
    Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    Parameters:
    
    interlaceMode - Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    See Also:
    
    H265InterlaceMode
  - getInterlaceMode
```
public String getInterlaceMode()
```
    Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    Returns:
    
    Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    See Also:
    
    H265InterlaceMode
  - withInterlaceMode
```
public H265Settings withInterlaceMode(String interlaceMode)
```
    Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    Parameters:
    
    interlaceMode - Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265InterlaceMode
  - withInterlaceMode
```
public H265Settings withInterlaceMode(H265InterlaceMode interlaceMode)
```
    Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    Parameters:
    
    interlaceMode - Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265InterlaceMode
  - setMaxBitrate
```
public void setMaxBitrate(Integer maxBitrate)
```
    Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
    
    Parameters:
    
    maxBitrate - Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
  - getMaxBitrate
```
public Integer getMaxBitrate()
```
    Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
    
    Returns:
    
    Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
  - withMaxBitrate
```
public H265Settings withMaxBitrate(Integer maxBitrate)
```
    Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
    
    Parameters:
    
    maxBitrate - Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setMinIInterval
```
public void setMinIInterval(Integer minIInterval)
```
    Use this setting only when you also enable Scene change detection. This setting determines how the encoder manages the spacing between I-frames that it inserts as part of the I-frame cadence and the I-frames that it inserts for Scene change detection. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. When you explicitly specify a value for this setting, the encoder determines whether to skip a cadence-driven I-frame by the value you set. For example, if you set Min I interval to 5 and a cadence-driven I-frame would fall within 5 frames of a scene-change I-frame, then the encoder skips the cadence-driven I-frame. In this way, one GOP is shrunk slightly and one GOP is stretched slightly. When the cadence-driven I-frames are farther from the scene-change I-frame than the value you set, then the encoder leaves all I-frames in place and the GOPs surrounding the scene change are smaller than the usual cadence GOPs.
    
    Parameters:
    
    minIInterval - Use this setting only when you also enable Scene change detection. This setting determines how the encoder manages the spacing between I-frames that it inserts as part of the I-frame cadence and the I-frames that it inserts for Scene change detection. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. When you explicitly specify a value for this setting, the encoder determines whether to skip a cadence-driven I-frame by the value you set. For example, if you set Min I interval to 5 and a cadence-driven I-frame would fall within 5 frames of a scene-change I-frame, then the encoder skips the cadence-driven I-frame. In this way, one GOP is shrunk slightly and one GOP is stretched slightly. When the cadence-driven I-frames are farther from the scene-change I-frame than the value you set, then the encoder leaves all I-frames in place and the GOPs surrounding the scene change are smaller than the usual cadence GOPs.
  - getMinIInterval
```
public Integer getMinIInterval()
```
    Use this setting only when you also enable Scene change detection. This setting determines how the encoder manages the spacing between I-frames that it inserts as part of the I-frame cadence and the I-frames that it inserts for Scene change detection. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. When you explicitly specify a value for this setting, the encoder determines whether to skip a cadence-driven I-frame by the value you set. For example, if you set Min I interval to 5 and a cadence-driven I-frame would fall within 5 frames of a scene-change I-frame, then the encoder skips the cadence-driven I-frame. In this way, one GOP is shrunk slightly and one GOP is stretched slightly. When the cadence-driven I-frames are farther from the scene-change I-frame than the value you set, then the encoder leaves all I-frames in place and the GOPs surrounding the scene change are smaller than the usual cadence GOPs.
    
    Returns:
    
    Use this setting only when you also enable Scene change detection. This setting determines how the encoder manages the spacing between I-frames that it inserts as part of the I-frame cadence and the I-frames that it inserts for Scene change detection. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. When you explicitly specify a value for this setting, the encoder determines whether to skip a cadence-driven I-frame by the value you set. For example, if you set Min I interval to 5 and a cadence-driven I-frame would fall within 5 frames of a scene-change I-frame, then the encoder skips the cadence-driven I-frame. In this way, one GOP is shrunk slightly and one GOP is stretched slightly. When the cadence-driven I-frames are farther from the scene-change I-frame than the value you set, then the encoder leaves all I-frames in place and the GOPs surrounding the scene change are smaller than the usual cadence GOPs.
  - withMinIInterval
```
public H265Settings withMinIInterval(Integer minIInterval)
```
    Use this setting only when you also enable Scene change detection. This setting determines how the encoder manages the spacing between I-frames that it inserts as part of the I-frame cadence and the I-frames that it inserts for Scene change detection. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. When you explicitly specify a value for this setting, the encoder determines whether to skip a cadence-driven I-frame by the value you set. For example, if you set Min I interval to 5 and a cadence-driven I-frame would fall within 5 frames of a scene-change I-frame, then the encoder skips the cadence-driven I-frame. In this way, one GOP is shrunk slightly and one GOP is stretched slightly. When the cadence-driven I-frames are farther from the scene-change I-frame than the value you set, then the encoder leaves all I-frames in place and the GOPs surrounding the scene change are smaller than the usual cadence GOPs.
    
    Parameters:
    
    minIInterval - Use this setting only when you also enable Scene change detection. This setting determines how the encoder manages the spacing between I-frames that it inserts as part of the I-frame cadence and the I-frames that it inserts for Scene change detection. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. When you explicitly specify a value for this setting, the encoder determines whether to skip a cadence-driven I-frame by the value you set. For example, if you set Min I interval to 5 and a cadence-driven I-frame would fall within 5 frames of a scene-change I-frame, then the encoder skips the cadence-driven I-frame. In this way, one GOP is shrunk slightly and one GOP is stretched slightly. When the cadence-driven I-frames are farther from the scene-change I-frame than the value you set, then the encoder leaves all I-frames in place and the GOPs surrounding the scene change are smaller than the usual cadence GOPs.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setNumberBFramesBetweenReferenceFrames
```
public void setNumberBFramesBetweenReferenceFrames(Integer numberBFramesBetweenReferenceFrames)
```
    Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.
    
    Parameters:
    
    numberBFramesBetweenReferenceFrames - Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.
  - getNumberBFramesBetweenReferenceFrames
```
public Integer getNumberBFramesBetweenReferenceFrames()
```
    Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.
    
    Returns:
    
    Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.
  - withNumberBFramesBetweenReferenceFrames
```
public H265Settings withNumberBFramesBetweenReferenceFrames(Integer numberBFramesBetweenReferenceFrames)
```
    Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.
    
    Parameters:
    
    numberBFramesBetweenReferenceFrames - Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setNumberReferenceFrames
```
public void setNumberReferenceFrames(Integer numberReferenceFrames)
```
    Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
    
    Parameters:
    
    numberReferenceFrames - Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
  - getNumberReferenceFrames
```
public Integer getNumberReferenceFrames()
```
    Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
    
    Returns:
    
    Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
  - withNumberReferenceFrames
```
public H265Settings withNumberReferenceFrames(Integer numberReferenceFrames)
```
    Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
    
    Parameters:
    
    numberReferenceFrames - Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setParControl
```
public void setParControl(String parControl)
```
    Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    Parameters:
    
    parControl - Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    See Also:
    
    H265ParControl
  - getParControl
```
public String getParControl()
```
    Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    Returns:
    
    Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    See Also:
    
    H265ParControl
  - withParControl
```
public H265Settings withParControl(String parControl)
```
    Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    Parameters:
    
    parControl - Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265ParControl
  - withParControl
```
public H265Settings withParControl(H265ParControl parControl)
```
    Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    Parameters:
    
    parControl - Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265ParControl
  - setParDenominator
```
public void setParDenominator(Integer parDenominator)
```
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
    
    Parameters:
    
    parDenominator - Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
  - getParDenominator
```
public Integer getParDenominator()
```
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
    
    Returns:
    
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
  - withParDenominator
```
public H265Settings withParDenominator(Integer parDenominator)
```
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
    
    Parameters:
    
    parDenominator - Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setParNumerator
```
public void setParNumerator(Integer parNumerator)
```
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
    
    Parameters:
    
    parNumerator - Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
  - getParNumerator
```
public Integer getParNumerator()
```
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
    
    Returns:
    
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
  - withParNumerator
```
public H265Settings withParNumerator(Integer parNumerator)
```
    Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
    
    Parameters:
    
    parNumerator - Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setQualityTuningLevel
```
public void setQualityTuningLevel(String qualityTuningLevel)
```
    Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    Parameters:
    
    qualityTuningLevel - Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    See Also:
    
    H265QualityTuningLevel
  - getQualityTuningLevel
```
public String getQualityTuningLevel()
```
    Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    Returns:
    
    Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    See Also:
    
    H265QualityTuningLevel
  - withQualityTuningLevel
```
public H265Settings withQualityTuningLevel(String qualityTuningLevel)
```
    Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    Parameters:
    
    qualityTuningLevel - Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265QualityTuningLevel
  - withQualityTuningLevel
```
public H265Settings withQualityTuningLevel(H265QualityTuningLevel qualityTuningLevel)
```
    Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    Parameters:
    
    qualityTuningLevel - Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265QualityTuningLevel
  - setQvbrSettings
```
public void setQvbrSettings(H265QvbrSettings qvbrSettings)
```
    Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.
    
    Parameters:
    
    qvbrSettings - Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.
  - getQvbrSettings
```
public H265QvbrSettings getQvbrSettings()
```
    Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.
    
    Returns:
    
    Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.
  - withQvbrSettings
```
public H265Settings withQvbrSettings(H265QvbrSettings qvbrSettings)
```
    Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.
    
    Parameters:
    
    qvbrSettings - Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setRateControlMode
```
public void setRateControlMode(String rateControlMode)
```
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    Parameters:
    
    rateControlMode - Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    See Also:
    
    H265RateControlMode
  - getRateControlMode
```
public String getRateControlMode()
```
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    Returns:
    
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    See Also:
    
    H265RateControlMode
  - withRateControlMode
```
public H265Settings withRateControlMode(String rateControlMode)
```
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    Parameters:
    
    rateControlMode - Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265RateControlMode
  - withRateControlMode
```
public H265Settings withRateControlMode(H265RateControlMode rateControlMode)
```
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    Parameters:
    
    rateControlMode - Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265RateControlMode
  - setSampleAdaptiveOffsetFilterMode
```
public void setSampleAdaptiveOffsetFilterMode(String sampleAdaptiveOffsetFilterMode)
```
    Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    Parameters:
    
    sampleAdaptiveOffsetFilterMode - Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    See Also:
    
    H265SampleAdaptiveOffsetFilterMode
  - getSampleAdaptiveOffsetFilterMode
```
public String getSampleAdaptiveOffsetFilterMode()
```
    Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    Returns:
    
    Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    See Also:
    
    H265SampleAdaptiveOffsetFilterMode
  - withSampleAdaptiveOffsetFilterMode
```
public H265Settings withSampleAdaptiveOffsetFilterMode(String sampleAdaptiveOffsetFilterMode)
```
    Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    Parameters:
    
    sampleAdaptiveOffsetFilterMode - Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SampleAdaptiveOffsetFilterMode
  - withSampleAdaptiveOffsetFilterMode
```
public H265Settings withSampleAdaptiveOffsetFilterMode(H265SampleAdaptiveOffsetFilterMode sampleAdaptiveOffsetFilterMode)
```
    Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    Parameters:
    
    sampleAdaptiveOffsetFilterMode - Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SampleAdaptiveOffsetFilterMode
  - setScanTypeConversionMode
```
public void setScanTypeConversionMode(String scanTypeConversionMode)
```
    Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    Parameters:
    
    scanTypeConversionMode - Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    See Also:
    
    H265ScanTypeConversionMode
  - getScanTypeConversionMode
```
public String getScanTypeConversionMode()
```
    Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    Returns:
    
    Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    See Also:
    
    H265ScanTypeConversionMode
  - withScanTypeConversionMode
```
public H265Settings withScanTypeConversionMode(String scanTypeConversionMode)
```
    Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    Parameters:
    
    scanTypeConversionMode - Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265ScanTypeConversionMode
  - withScanTypeConversionMode
```
public H265Settings withScanTypeConversionMode(H265ScanTypeConversionMode scanTypeConversionMode)
```
    Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    Parameters:
    
    scanTypeConversionMode - Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265ScanTypeConversionMode
  - setSceneChangeDetect
```
public void setSceneChangeDetect(String sceneChangeDetect)
```
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    Parameters:
    
    sceneChangeDetect - Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    See Also:
    
    H265SceneChangeDetect
  - getSceneChangeDetect
```
public String getSceneChangeDetect()
```
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    Returns:
    
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    See Also:
    
    H265SceneChangeDetect
  - withSceneChangeDetect
```
public H265Settings withSceneChangeDetect(String sceneChangeDetect)
```
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    Parameters:
    
    sceneChangeDetect - Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SceneChangeDetect
  - withSceneChangeDetect
```
public H265Settings withSceneChangeDetect(H265SceneChangeDetect sceneChangeDetect)
```
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    Parameters:
    
    sceneChangeDetect - Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SceneChangeDetect
  - setSlices
```
public void setSlices(Integer slices)
```
    Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
    
    Parameters:
    
    slices - Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
  - getSlices
```
public Integer getSlices()
```
    Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
    
    Returns:
    
    Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
  - withSlices
```
public H265Settings withSlices(Integer slices)
```
    Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
    
    Parameters:
    
    slices - Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - setSlowPal
```
public void setSlowPal(String slowPal)
```
    Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    Parameters:
    
    slowPal - Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    See Also:
    
    H265SlowPal
  - getSlowPal
```
public String getSlowPal()
```
    Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    Returns:
    
    Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    See Also:
    
    H265SlowPal
  - withSlowPal
```
public H265Settings withSlowPal(String slowPal)
```
    Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    Parameters:
    
    slowPal - Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SlowPal
  - withSlowPal
```
public H265Settings withSlowPal(H265SlowPal slowPal)
```
    Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    Parameters:
    
    slowPal - Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SlowPal
  - setSpatialAdaptiveQuantization
```
public void setSpatialAdaptiveQuantization(String spatialAdaptiveQuantization)
```
    Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    Parameters:
    
    spatialAdaptiveQuantization - Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    See Also:
    
    H265SpatialAdaptiveQuantization
  - getSpatialAdaptiveQuantization
```
public String getSpatialAdaptiveQuantization()
```
    Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    Returns:
    
    Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    See Also:
    
    H265SpatialAdaptiveQuantization
  - withSpatialAdaptiveQuantization
```
public H265Settings withSpatialAdaptiveQuantization(String spatialAdaptiveQuantization)
```
    Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    Parameters:
    
    spatialAdaptiveQuantization - Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SpatialAdaptiveQuantization
  - withSpatialAdaptiveQuantization
```
public H265Settings withSpatialAdaptiveQuantization(H265SpatialAdaptiveQuantization spatialAdaptiveQuantization)
```
    Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    Parameters:
    
    spatialAdaptiveQuantization - Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265SpatialAdaptiveQuantization
  - setTelecine
```
public void setTelecine(String telecine)
```
    This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    Parameters:
    
    telecine - This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    See Also:
    
    H265Telecine
  - getTelecine
```
public String getTelecine()
```
    This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    Returns:
    
    This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    See Also:
    
    H265Telecine
  - withTelecine
```
public H265Settings withTelecine(String telecine)
```
    This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    Parameters:
    
    telecine - This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265Telecine
  - withTelecine
```
public H265Settings withTelecine(H265Telecine telecine)
```
    This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    Parameters:
    
    telecine - This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265Telecine
  - setTemporalAdaptiveQuantization
```
public void setTemporalAdaptiveQuantization(String temporalAdaptiveQuantization)
```
    Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    Parameters:
    
    temporalAdaptiveQuantization - Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    See Also:
    
    H265TemporalAdaptiveQuantization
  - getTemporalAdaptiveQuantization
```
public String getTemporalAdaptiveQuantization()
```
    Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    Returns:
    
    Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    See Also:
    
    H265TemporalAdaptiveQuantization
  - withTemporalAdaptiveQuantization
```
public H265Settings withTemporalAdaptiveQuantization(String temporalAdaptiveQuantization)
```
    Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    Parameters:
    
    temporalAdaptiveQuantization - Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265TemporalAdaptiveQuantization
  - withTemporalAdaptiveQuantization
```
public H265Settings withTemporalAdaptiveQuantization(H265TemporalAdaptiveQuantization temporalAdaptiveQuantization)
```
    Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    Parameters:
    
    temporalAdaptiveQuantization - Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265TemporalAdaptiveQuantization
  - setTemporalIds
```
public void setTemporalIds(String temporalIds)
```
    Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    Parameters:
    
    temporalIds - Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    See Also:
    
    H265TemporalIds
  - getTemporalIds
```
public String getTemporalIds()
```
    Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    Returns:
    
    Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    See Also:
    
    H265TemporalIds
  - withTemporalIds
```
public H265Settings withTemporalIds(String temporalIds)
```
    Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    Parameters:
    
    temporalIds - Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265TemporalIds
  - withTemporalIds
```
public H265Settings withTemporalIds(H265TemporalIds temporalIds)
```
    Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    Parameters:
    
    temporalIds - Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265TemporalIds
  - setTiles
```
public void setTiles(String tiles)
```
    Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    Parameters:
    
    tiles - Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    See Also:
    
    H265Tiles
  - getTiles
```
public String getTiles()
```
    Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    Returns:
    
    Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    See Also:
    
    H265Tiles
  - withTiles
```
public H265Settings withTiles(String tiles)
```
    Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    Parameters:
    
    tiles - Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265Tiles
  - withTiles
```
public H265Settings withTiles(H265Tiles tiles)
```
    Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    Parameters:
    
    tiles - Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265Tiles
  - setUnregisteredSeiTimecode
```
public void setUnregisteredSeiTimecode(String unregisteredSeiTimecode)
```
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    Parameters:
    
    unregisteredSeiTimecode - Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    See Also:
    
    H265UnregisteredSeiTimecode
  - getUnregisteredSeiTimecode
```
public String getUnregisteredSeiTimecode()
```
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    Returns:
    
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    See Also:
    
    H265UnregisteredSeiTimecode
  - withUnregisteredSeiTimecode
```
public H265Settings withUnregisteredSeiTimecode(String unregisteredSeiTimecode)
```
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    Parameters:
    
    unregisteredSeiTimecode - Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265UnregisteredSeiTimecode
  - withUnregisteredSeiTimecode
```
public H265Settings withUnregisteredSeiTimecode(H265UnregisteredSeiTimecode unregisteredSeiTimecode)
```
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    Parameters:
    
    unregisteredSeiTimecode - Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265UnregisteredSeiTimecode
  - setWriteMp4PackagingType
```
public void setWriteMp4PackagingType(String writeMp4PackagingType)
```
    If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    Parameters:
    
    writeMp4PackagingType - If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    See Also:
    
    H265WriteMp4PackagingType
  - getWriteMp4PackagingType
```
public String getWriteMp4PackagingType()
```
    If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    Returns:
    
    If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    See Also:
    
    H265WriteMp4PackagingType
  - withWriteMp4PackagingType
```
public H265Settings withWriteMp4PackagingType(String writeMp4PackagingType)
```
    If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    Parameters:
    
    writeMp4PackagingType - If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265WriteMp4PackagingType
  - withWriteMp4PackagingType
```
public H265Settings withWriteMp4PackagingType(H265WriteMp4PackagingType writeMp4PackagingType)
```
    If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    Parameters:
    
    writeMp4PackagingType - If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    H265WriteMp4PackagingType
  - toString
```
public String toString()
```
    Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
    
    Overrides:
    
    toString in class Object
    
    Returns:
    
    A string representation of this object.
    
    See Also:
    
    Object.toString()
  - equals
```
public boolean equals(Object obj)
```
    Overrides:
    
    equals in class Object
  - hashCode
```
public int hashCode()
```
    Overrides:
    
    hashCode in class Object
  - clone
```
public H265Settings clone()
```
    Overrides:
    
    clone in class Object
  - marshall
```
public void marshall(ProtocolMarshaller protocolMarshaller)
```
    Description copied from interface: StructuredPojo
    
    Marshalls this structured data using the given ProtocolMarshaller.
    
    Specified by:
    
    marshall in interface StructuredPojo
    
    Parameters:
    
    protocolMarshaller - Implementation of ProtocolMarshaller used to marshall this object's data.

AWS SDK for Java 1.x API Reference - 1.12.780

Class H265Settings

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

H265Settings

Method Detail

setAdaptiveQuantization

getAdaptiveQuantization

withAdaptiveQuantization

withAdaptiveQuantization

setAlternateTransferFunctionSei

getAlternateTransferFunctionSei

withAlternateTransferFunctionSei

withAlternateTransferFunctionSei

setBandwidthReductionFilter

getBandwidthReductionFilter

withBandwidthReductionFilter

setBitrate

getBitrate

withBitrate

setCodecLevel

getCodecLevel

withCodecLevel

withCodecLevel

setCodecProfile

getCodecProfile

withCodecProfile

withCodecProfile

setDynamicSubGop

getDynamicSubGop

withDynamicSubGop

withDynamicSubGop

setEndOfStreamMarkers

getEndOfStreamMarkers

withEndOfStreamMarkers

withEndOfStreamMarkers

setFlickerAdaptiveQuantization

getFlickerAdaptiveQuantization

withFlickerAdaptiveQuantization

withFlickerAdaptiveQuantization

setFramerateControl

getFramerateControl

withFramerateControl

withFramerateControl

setFramerateConversionAlgorithm

getFramerateConversionAlgorithm

withFramerateConversionAlgorithm

withFramerateConversionAlgorithm

setFramerateDenominator

getFramerateDenominator

withFramerateDenominator

setFramerateNumerator

getFramerateNumerator

withFramerateNumerator

setGopBReference

getGopBReference

withGopBReference

withGopBReference

setGopClosedCadence

getGopClosedCadence

withGopClosedCadence

setGopSize

getGopSize

withGopSize

setGopSizeUnits

getGopSizeUnits

withGopSizeUnits

withGopSizeUnits

setHrdBufferFinalFillPercentage

getHrdBufferFinalFillPercentage

withHrdBufferFinalFillPercentage

setHrdBufferInitialFillPercentage

getHrdBufferInitialFillPercentage

withHrdBufferInitialFillPercentage

setHrdBufferSize

getHrdBufferSize

withHrdBufferSize

setInterlaceMode