AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.
Modifies a task set. This is used when a service uses the EXTERNAL
deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide .
See also: AWS API Documentation
update-task-set
--cluster <value>
--service <value>
--task-set <value>
--scale <value>
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
--cluster
(string)
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service that the task set is found in.
--service
(string)
The short name or full Amazon Resource Name (ARN) of the service that the task set is found in.
--task-set
(string)
The short name or full Amazon Resource Name (ARN) of the task set to update.
--scale
(structure)
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
value -> (double)
The value, specified as a percent total of a service'sdesiredCount
, to scale the task set. Accepted values are numbers between 0 and 100.unit -> (string)
The unit of measure for the scale value.
Shorthand Syntax:
value=double,unit=string
JSON Syntax:
{
"value": double,
"unit": "PERCENT"
}
--cli-input-json
(string)
Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton
. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.
--generate-cli-skeleton
(string)
Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input
, prints a sample input JSON that can be used as an argument for --cli-input-json
. If provided with the value output
, it validates the command inputs and returns a sample output JSON for that command.
--debug
(boolean)
Turn on debug logging.
--endpoint-url
(string)
Override command's default URL with the given URL.
--no-verify-ssl
(boolean)
By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.
--no-paginate
(boolean)
Disable automatic pagination.
--output
(string)
The formatting style for command output.
--query
(string)
A JMESPath query to use in filtering the response data.
--profile
(string)
Use a specific profile from your credential file.
--region
(string)
The region to use. Overrides config/env settings.
--version
(string)
Display the version of this tool.
--color
(string)
Turn on/off color output.
--no-sign-request
(boolean)
Do not sign requests. Credentials will not be loaded if this argument is provided.
--ca-bundle
(string)
The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.
--cli-read-timeout
(int)
The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.
--cli-connect-timeout
(int)
The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.
To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.
Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal's quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .
To update a task set
The following update-task-set
example updates a task set to adjust the scale.
aws ecs update-task-set \
--cluster MyCluster \
--service MyService \
--task-set arn:aws:ecs:us-west-2:123456789012:task-set/MyCluster/MyService/ecs-svc/1234567890123456789 \
--scale value=50,unit=PERCENT
Output:
{
"taskSet": {
"id": "ecs-svc/1234567890123456789",
"taskSetArn": "arn:aws:ecs:us-west-2:123456789012:task-set/MyCluster/MyService/ecs-svc/1234567890123456789",
"status": "ACTIVE",
"taskDefinition": "arn:aws:ecs:us-west-2:123456789012:task-definition/sample-fargate:2",
"computedDesiredCount": 0,
"pendingCount": 0,
"runningCount": 0,
"createdAt": 1557128360.711,
"updatedAt": 1557129279.914,
"launchType": "EC2",
"networkConfiguration": {
"awsvpcConfiguration": {
"subnets": [
"subnet-12344321"
],
"securityGroups": [
"sg-12344321"
],
"assignPublicIp": "DISABLED"
}
},
"loadBalancers": [],
"serviceRegistries": [],
"scale": {
"value": 50.0,
"unit": "PERCENT"
},
"stabilityStatus": "STABILIZING",
"stabilityStatusAt": 1557129279.914
}
}
taskSet -> (structure)
Details about the task set.
id -> (string)
The ID of the task set.taskSetArn -> (string)
The Amazon Resource Name (ARN) of the task set.serviceArn -> (string)
The Amazon Resource Name (ARN) of the service the task set exists in.clusterArn -> (string)
The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.startedBy -> (string)
The tag specified when a task set is started. If an CodeDeploy deployment created the task set, thestartedBy
parameter isCODE_DEPLOY
. If an external deployment created the task set, thestartedBy
field isn't used.externalId -> (string)
The external ID associated with the task set.
If an CodeDeploy deployment created a task set, the
externalId
parameter contains the CodeDeploy deployment ID.If a task set is created for an external deployment and is associated with a service discovery registry, the
externalId
parameter contains theECS_TASK_SET_EXTERNAL_ID
Cloud Map attribute.status -> (string)
The status of the task set. The following describes each state.
PRIMARYThe task set is serving production traffic.
ACTIVEThe task set isn't serving production traffic.
DRAININGThe tasks in the task set are being stopped, and their corresponding targets are being deregistered from their target group.
taskDefinition -> (string)
The task definition that the task set is using.computedDesiredCount -> (integer)
The computed desired count for the task set. This is calculated by multiplying the service'sdesiredCount
by the task set'sscale
percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks.pendingCount -> (integer)
The number of tasks in the task set that are in thePENDING
status during a deployment. A task in thePENDING
state is preparing to enter theRUNNING
state. A task set enters thePENDING
status when it launches for the first time or when it's restarted after being in theSTOPPED
state.runningCount -> (integer)
The number of tasks in the task set that are in theRUNNING
status during a deployment. A task in theRUNNING
state is running and ready for use.createdAt -> (timestamp)
The Unix timestamp for the time when the task set was created.updatedAt -> (timestamp)
The Unix timestamp for the time when the task set was last updated.launchType -> (string)
The launch type the tasks in the task set are using. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide .capacityProviderStrategy -> (list)
The capacity provider strategy that are associated with the task set.
(structure)
The details of a capacity provider strategy. A capacity provider strategy can be set when using the RunTask or CreateCluster APIs or as the default capacity provider strategy for a cluster with the
CreateCluster
API.Only capacity providers that are already associated with a cluster and have an
ACTIVE
orUPDATING
status can be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster.If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New Auto Scaling group capacity providers can be created with the CreateClusterCapacityProvider API operation.
To use a Fargate capacity provider, specify either the
FARGATE
orFARGATE_SPOT
capacity providers. The Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used in a capacity provider strategy.With
FARGATE_SPOT
, you can run interruption tolerant tasks at a rate that's discounted compared to theFARGATE
price.FARGATE_SPOT
runs tasks on spare compute capacity. When Amazon Web Services needs the capacity back, your tasks are interrupted with a two-minute warning.FARGATE_SPOT
only supports Linux tasks with the X86_64 architecture on platform version 1.3.0 or later.A capacity provider strategy may contain a maximum of 6 capacity providers.
capacityProvider -> (string)
The short name of the capacity provider.weight -> (integer)
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The
weight
value is taken into consideration after thebase
value, if defined, is satisfied.If no
weight
value is specified, the default value of0
is used. When multiple capacity providers are specified within a capacity provider strategy, at least one of the capacity providers must have a weight value greater than zero and any capacity providers with a weight of0
can't be used to place tasks. If you specify multiple capacity providers in a strategy that all have a weight of0
, anyRunTask
orCreateService
actions using the capacity provider strategy will fail.An example scenario for using weights is defining a strategy that contains two capacity providers and both have a weight of
1
, then when thebase
is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of1
for capacityProviderA and a weight of4
for capacityProviderB , then for every one task that's run using capacityProviderA , four tasks would use capacityProviderB .base -> (integer)
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of0
is used.platformVersion -> (string)
The Fargate platform version where the tasks in the task set are running. A platform version is only specified for tasks run on Fargate. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide .platformFamily -> (string)
The operating system that your tasks in the set are running on. A platform family is specified only for tasks that use the Fargate launch type.
All tasks in the set must have the same value.
networkConfiguration -> (structure)
The network configuration for the task set.
awsvpcConfiguration -> (structure)
The VPC subnets and security groups that are associated with a task.
Note
All specified subnets and security groups must be from the same VPC.subnets -> (list)
The IDs of the subnets associated with the task or service. There's a limit of 16 subnets that can be specified per
awsvpcConfiguration
.Note
All specified subnets must be from the same VPC.(string)
securityGroups -> (list)
The IDs of the security groups associated with the task or service. If you don't specify a security group, the default security group for the VPC is used. There's a limit of 5 security groups that can be specified per
awsvpcConfiguration
.Note
All specified security groups must be from the same VPC.(string)
assignPublicIp -> (string)
Whether the task's elastic network interface receives a public IP address. The default value isDISABLED
.loadBalancers -> (list)
Details on a load balancer that are used with a task set.
(structure)
The load balancer configuration to use with a service or task set.
When you add, update, or remove a load balancer configuration, Amazon ECS starts a new deployment with the updated Elastic Load Balancing configuration. This causes tasks to register to and deregister from load balancers.
We recommend that you verify this on a test environment before you update the Elastic Load Balancing configuration.
A service-linked role is required for services that use multiple target groups. For more information, see Using service-linked roles in the Amazon Elastic Container Service Developer Guide .
targetGroupArn -> (string)
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer.
For services using the
ECS
deployment controller, you can specify one or multiple target groups. For more information, see Registering multiple target groups with a service in the Amazon Elastic Container Service Developer Guide .For services using the
CODE_DEPLOY
deployment controller, you're required to define two target groups for the load balancer. For more information, see Blue/green deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .Warning
If your service's task definition uses theawsvpc
network mode, you must chooseip
as the target type, notinstance
. Do this when creating your target groups because tasks that use theawsvpc
network mode are associated with an elastic network interface, not an Amazon EC2 instance. This network mode is required for the Fargate launch type.loadBalancerName -> (string)
The name of the load balancer to associate with the Amazon ECS service or task set.
If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName -> (string)
The name of the container (as it appears in a container definition) to associate with the load balancer.
You need to specify the container name when configuring the target group for an Amazon ECS load balancer.
containerPort -> (integer)
The port on the container to associate with the load balancer. This port must correspond to acontainerPort
in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they're launched on must allow ingress traffic on thehostPort
of the port mapping.serviceRegistries -> (list)
The details for the service discovery registries to assign to this task set. For more information, see Service discovery .
(structure)
The details for the service registry.
Each service may be associated with one service registry. Multiple service registries for each service are not supported.
When you add, update, or remove the service registries configuration, Amazon ECS starts a new deployment. New tasks are registered and deregistered to the updated service registry configuration.
registryArn -> (string)
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Cloud Map. For more information, see CreateService .port -> (integer)
The port value used if your service discovery service specified an SRV record. This field might be used if both theawsvpc
network mode and SRV records are used.containerName -> (string)
The container name value to be used for your service discovery service. It's already specified in the task definition. If the task definition that your service task specifies uses thebridge
orhost
network mode, you must specify acontainerName
andcontainerPort
combination from the task definition. If the task definition that your service task specifies uses theawsvpc
network mode and a type SRV DNS record is used, you must specify either acontainerName
andcontainerPort
combination or aport
value. However, you can't specify both.containerPort -> (integer)
The port value to be used for your service discovery service. It's already specified in the task definition. If the task definition your service task specifies uses thebridge
orhost
network mode, you must specify acontainerName
andcontainerPort
combination from the task definition. If the task definition your service task specifies uses theawsvpc
network mode and a type SRV DNS record is used, you must specify either acontainerName
andcontainerPort
combination or aport
value. However, you can't specify both.scale -> (structure)
A floating-point percentage of your desired number of tasks to place and keep running in the task set.
value -> (double)
The value, specified as a percent total of a service'sdesiredCount
, to scale the task set. Accepted values are numbers between 0 and 100.unit -> (string)
The unit of measure for the scale value.stabilityStatus -> (string)
The stability status. This indicates whether the task set has reached a steady state. If the following conditions are met, the task set are in
STEADY_STATE
:
- The task
runningCount
is equal to thecomputedDesiredCount
.- The
pendingCount
is0
.- There are no tasks that are running on container instances in the
DRAINING
status.- All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions aren't met, the stability status returns
STABILIZING
.stabilityStatusAt -> (timestamp)
The Unix timestamp for the time when the task set stability status was retrieved.tags -> (list)
The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value. You define both.
The following basic restrictions apply to tags:
- Maximum number of tags per resource - 50
- For each resource, each tag key must be unique, and each tag key can have only one value.
- Maximum key length - 128 Unicode characters in UTF-8
- Maximum value length - 256 Unicode characters in UTF-8
- If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
- Tag keys and values are case-sensitive.
- Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.(structure)
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value. You define them.
The following basic restrictions apply to tags:
- Maximum number of tags per resource - 50
- For each resource, each tag key must be unique, and each tag key can have only one value.
- Maximum key length - 128 Unicode characters in UTF-8
- Maximum value length - 256 Unicode characters in UTF-8
- If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
- Tag keys and values are case-sensitive.
- Do not use
aws:
,AWS:
, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.key -> (string)
One part of a key-value pair that make up a tag. Akey
is a general label that acts like a category for more specific tag values.value -> (string)
The optional part of a key-value pair that make up a tag. Avalue
acts as a descriptor within a tag category (key).fargateEphemeralStorage -> (structure)
The Fargate ephemeral storage settings for the task set.
kmsKeyId -> (string)
Specify an Key Management Service key ID to encrypt the ephemeral storage for deployment.