Journey State

A journey is an automated workflow that performs a series of messaging activities for an Amazon Pinpoint application. The Journey State resource represents the status of a specific journey, including all of a journey's activities.

You can use this resource to cancel (stop) a journey or to retrieve information about the status and settings for a journey.

URI

/v1/apps/application-id/journeys/journey-id/state

HTTP methods

PUT

Operation ID: UpdateJourneyState

Cancels (stops) an active journey.

Path parameters

Name	Type	Required	Description
journey-id	String	True	The unique identifier for the journey.
application-id	String	True	The unique identifier for the application. This identifier is displayed as the Project ID on the Amazon Pinpoint console.

Header parameters

Name	Type	Required	Description
accept	String	False	Indicates which content types, expressed as MIME types, the client understands.

Responses

Status code	Response model	Description
200	JourneyResponse	The request succeeded.
400	MessageBody	The request contains a syntax error (BadRequestException).
403	MessageBody	The request was denied because access to the specified resource is forbidden (ForbiddenException).
404	MessageBody	The request failed because the specified resource was not found (NotFoundException).
405	MessageBody	The request failed because the method is not allowed for the specified resource (MethodNotAllowedException).
413	MessageBody	The request failed because the payload for the body of the request is too large (RequestEntityTooLargeException).
429	MessageBody	The request failed because too many requests were sent during a certain amount of time (TooManyRequestsException).
500	MessageBody	The request failed due to an unknown internal server error, exception, or failure (InternalServerErrorException).

OPTIONS

Retrieves information about the communication requirements and options that are available for the Journey State resource.

Path parameters

Name	Type	Required	Description
journey-id	String	True	The unique identifier for the journey.
application-id	String	True	The unique identifier for the application. This identifier is displayed as the Project ID on the Amazon Pinpoint console.

Responses

Status code	Response model	Description
200	None	The request succeeded.

Schemas

Request bodies

PUT schema

{
  "State": enum
}

Response bodies

JourneyResponse schema

{
  "Name": "string",
  "Schedule": {
    "StartTime": "string",
    "EndTime": "string",
    "Timezone": "string"
  },
  "StartCondition": {
    "Description": "string",
    "EventStartCondition": {
      "EventFilter": {
        "Dimensions": {
          "EventType": {
            "DimensionType": enum,
            "Values": [
              "string"
            ]
          },
          "Attributes": {
          },
          "Metrics": {
          }
        },
        "FilterType": enum
      },
      "SegmentId": "string"
    },
    "SegmentStartCondition": {
      "SegmentId": "string"
    }
  },
  "Limits": {
    "DailyCap": integer,
    "TotalCap": integer,
    "TimeframeCap": {
      "Days": integer,
      "Cap": integer
    },
    "MessagesPerSecond": integer,
    "EndpointReentryCap": integer,
    "EndpointReentryInterval": "string"
  },
  "StartActivity": "string",
  "Activities": {
  },
  "RefreshFrequency": "string",
  "QuietTime": {
    "Start": "string",
    "End": "string"
  },
  "WaitForQuietTime": boolean,
  "SendingSchedule": boolean,
  "OpenHours": {
    "EMAIL": {
    },
    "SMS": {
    },
    "PUSH": {
    },
    "VOICE": {
    },
    "CUSTOM": {
    }
  },
  "ClosedDays": {
    "EMAIL": [
      {
        "Name": "string",
        "StartDateTime": "string",
        "EndDateTime": "string"
      }
    ],
    "SMS": [
      {
        "Name": "string",
        "StartDateTime": "string",
        "EndDateTime": "string"
      }
    ],
    "PUSH": [
      {
        "Name": "string",
        "StartDateTime": "string",
        "EndDateTime": "string"
      }
    ],
    "VOICE": [
      {
        "Name": "string",
        "StartDateTime": "string",
        "EndDateTime": "string"
      }
    ],
    "CUSTOM": [
      {
        "Name": "string",
        "StartDateTime": "string",
        "EndDateTime": "string"
      }
    ]
  },
  "RefreshOnSegmentUpdate": boolean,
  "LocalTime": boolean,
  "CreationDate": "string",
  "LastModifiedDate": "string",
  "State": enum,
  "tags": {
  },
  "TimezoneEstimationMethods": [
    enum
  ],
  "Id": "string",
  "ApplicationId": "string"
}

MessageBody schema

{
  "RequestID": "string",
  "Message": "string"
}

Properties

Activity

Specifies the configuration and other settings for an activity in a journey.

Property	Type	Required	Description
ConditionalSplit	ConditionalSplitActivity	False	The settings for a yes/no split activity. This type of activity sends participants down one of two paths in a journey, based on conditions that you specify.
CUSTOM	CustomMessageActivity	False	The settings for a custom message activity. This type of activity calls an AWS Lambda function or web hook that sends messages to participants.
Description	string	False	The custom description of the activity.
EMAIL	EmailMessageActivity	False	The settings for an email activity. This type of activity sends an email message to participants.
Holdout	HoldoutActivity	False	The settings for a holdout activity. This type of activity stops a journey for a specified percentage of participants.
MultiCondition	MultiConditionalSplitActivity	False	The settings for a multivariate split activity. This type of activity sends participants down one of as many as five paths (including a default Else path) in a journey, based on conditions that you specify.
PUSH	PushMessageActivity	False	The settings for a push notification activity. This type of activity sends a push notification to participants.
RandomSplit	RandomSplitActivity	False	The settings for a random split activity. This type of activity randomly sends specified percentages of participants down one of as many as five paths in a journey, based on conditions that you specify.
SMS	SMSMessageActivity	False	The settings for an SMS activity. This type of activity sends a text message to participants.
Wait	WaitActivity	False	The settings for a wait activity. This type of activity waits for a certain amount of time or until a specific date and time before moving participants to the next activity in a journey.

AttributeDimension

Specifies attribute-based criteria for including or excluding endpoints from a segment.

Property	Type	Required	Description
AttributeType	string Values: INCLUSIVE | EXCLUSIVE | CONTAINS | BEFORE | AFTER | BETWEEN | NOT_BETWEEN | ON	False	The type of segment dimension to use. Valid values are: INCLUSIVE – endpoints that have attributes matching the values are included in the segment. EXCLUSIVE – endpoints that have attributes matching the values are excluded from the segment. CONTAINS – endpoints that have attributes' substrings match the values are included in the segment. BEFORE – endpoints with attributes read as ISO_INSTANT datetimes before the value are included in the segment. AFTER – endpoints with attributes read as ISO_INSTANT datetimes after the value are included in the segment. BETWEEN – endpoints with attributes read as ISO_INSTANT datetimes between the values are included in the segment. ON – endpoints with attributes read as ISO_INSTANT dates on the value are included in the segment. Time is ignored in this comparison.
Values	Array of type string	True	The criteria values to use for the segment dimension. Depending on the value of the AttributeType property, endpoints are included or excluded from the segment if their attribute values match the criteria values.

ClosedDays

The time when a journey will not send messages. QuietTime should be configured first and SendingSchedule should be set to true.

Property	Type	Required	Description
CUSTOM	Array of type ClosedDaysRule	False	Rules for the Custom channel.
EMAIL	Array of type ClosedDaysRule	False	Rules for the Email channel.
PUSH	Array of type ClosedDaysRule	False	Rules for the Push channel.
SMS	Array of type ClosedDaysRule	False	Rules for the SMS channel.
VOICE	Array of type ClosedDaysRule	False	Rules for the Voice channel.

ClosedDaysRule

Specifies the rule settings for when messages can't be sent.

Property	Type	Required	Description
EndDateTime	string	True	EndDateTime ISO 8601 format
Name	string	True	The name of the closed rule.
StartDateTime	string	True	StartDateTime ISO 8601 format

Condition

Specifies the conditions to evaluate for an activity in a journey, and how to evaluate those conditions.

Property	Type	Required	Description
Conditions	Array of type SimpleCondition	False	The conditions to evaluate for the activity.
Operator	string Values: ALL | ANY	False	Specifies how to handle multiple conditions for the activity. For example, if you specify two conditions for an activity, whether both or only one of the conditions must be met for the activity to be performed.

ConditionalSplitActivity

Specifies the settings for a yes/no split activity in a journey. This type of activity sends participants down one of two paths in a journey, based on conditions that you specify.

Note

To create yes/no split activities that send participants down different paths based on push notification events (such as Open or Received events), your mobile app has to specify the User ID and Endpoint ID values. For more information, see Integrating Amazon Pinpoint with your application in the Amazon Pinpoint Developer Guide.

Property	Type	Required	Description
Condition	Condition	False	The conditions that define the paths for the activity, and the relationship between the conditions.
EvaluationWaitTime	WaitTime	False	The amount of time to wait before determining whether the conditions are met, or the date and time when Amazon Pinpoint determines whether the conditions are met.
FalseActivity	string	False	The unique identifier for the activity to perform if the conditions aren't met.
TrueActivity	string	False	The unique identifier for the activity to perform if the conditions are met.

CustomMessageActivity

The settings for a custom message activity. This type of activity calls an AWS Lambda function or web hook that sends messages to participants.

Property	Type	Required	Description
DeliveryUri	string	False	The destination to send the campaign or treatment to. This value can be one of the following: The name or Amazon Resource Name (ARN) of an AWS Lambda function to invoke to handle delivery of the campaign or treatment. The URL for a web application or service that supports HTTPS and can receive the message. The URL has to be a full URL, including the HTTPS protocol.
EndpointTypes	Array of type string Values: PUSH | GCM | APNS | APNS_SANDBOX | APNS_VOIP | APNS_VOIP_SANDBOX | ADM | SMS | VOICE | EMAIL | BAIDU | CUSTOM | IN_APP	False	The types of endpoints to send the custom message to. Each valid value maps to a type of channel that you can associate with an endpoint by using the ChannelType property of an endpoint.
MessageConfig	JourneyCustomMessage	False	Specifies the message data included in a custom channel message that's sent to participants in a journey.
NextActivity	string	False	The unique identifier for the next activity to perform, after Amazon Pinpoint calls the AWS Lambda function or web hook.
TemplateName	string	False	The name of the custom message template to use for the message. If specified, this value must match the name of an existing message template.
TemplateVersion	string	False	The unique identifier for the version of the message template to use for the message. If specified, this value must match the identifier for an existing template version. To retrieve a list of versions and version identifiers for a template, use the Template Versions resource. If you don't specify a value for this property, Amazon Pinpoint uses the active version of the template. The active version is typically the version of a template that's been most recently reviewed and approved for use, depending on your workflow. It isn't necessarily the latest version of a template.

EmailMessageActivity

Specifies the settings for an email activity in a journey. This type of activity sends an email message to participants.

Property	Type	Required	Description
MessageConfig	JourneyEmailMessage	False	Specifies the sender address for an email message that's sent to participants in the journey.
NextActivity	string	False	The unique identifier for the next activity to perform, after the message is sent.
TemplateName	string	False	The name of the email message template to use for the message. If specified, this value must match the name of an existing message template.
TemplateVersion	string	False	The unique identifier for the version of the email template to use for the message. If specified, this value must match the identifier for an existing template version. To retrieve a list of versions and version identifiers for a template, use the Template Versions resource. If you don't specify a value for this property, Amazon Pinpoint uses the active version of the template. The active version is typically the version of a template that's been most recently reviewed and approved for use, depending on your workflow. It isn't necessarily the latest version of a template.

EventCondition

Specifies the conditions to evaluate for an event that applies to an activity in a journey.

Property	Type	Required	Description
Dimensions	EventDimensions	False	The dimensions for the event filter to use for the activity.
MessageActivity	string	False	The message identifier (message_id) for the message to use when determining whether message events meet the condition.

EventDimensions

Specifies the dimensions for an event filter that determines when a campaign is sent or a journey activity is performed.

Property	Type	Required	Description
Attributes	object	False	One or more custom attributes that your application reports to Amazon Pinpoint. You can use these attributes as selection criteria when you create an event filter.
EventType	SetDimension	False	The name of the event that causes the campaign to be sent or the journey activity to be performed. This can be a standard event that Amazon Pinpoint generates, such as _email.delivered or _custom.delivered. For campaigns, this can also be a custom event that's specific to your application. For information about standard events, see Streaming Amazon Pinpoint Events in the Amazon Pinpoint Developer Guide.
Metrics	object	False	One or more custom metrics that your application reports to Amazon Pinpoint. You can use these metrics as selection criteria when you create an event filter.

EventFilter

Specifies the settings for an event that causes a campaign to be sent or a journey activity to be performed.

Property	Type	Required	Description
Dimensions	EventDimensions	True	The dimensions for the event filter to use for the campaign or the journey activity.
FilterType	string Values: SYSTEM | ENDPOINT | USER	True	The type of event that causes the campaign to be sent or the journey activity to be performed. Valid values are: SYSTEM, sends the campaign or performs the activity when a system event occurs; and, ENDPOINT, sends the campaign or performs the activity when an endpoint event (Events resource) occurs.

EventStartCondition

Specifies the settings for an event that causes a journey activity to start.

Property	Type	Required	Description
EventFilter	EventFilter	False	The EventFilter for defined for scheduling Event based Journey
SegmentId	string	False	Accept only Endpoints events from this specific dynamic segmentId

GPSCoordinates

Specifies the GPS coordinates of a location.

Property	Type	Required	Description
Latitude	number	True	The latitude coordinate of the location.
Longitude	number	True	The longitude coordinate of the location.

GPSPointDimension

Specifies GPS-based criteria for including or excluding endpoints from a segment.

Property	Type	Required	Description
Coordinates	GPSCoordinates	True	The GPS coordinates to measure distance from.
RangeInKilometers	number	False	The range, in kilometers, from the GPS coordinates.

HoldoutActivity

Specifies the settings for a holdout activity in a journey. This type of activity stops a journey for a specified percentage of participants.

Property	Type	Required	Description
NextActivity	string	False	The unique identifier for the next activity to perform, after performing the holdout activity.
Percentage	integer	True	The percentage of participants who shouldn't continue the journey. To determine which participants are held out, Amazon Pinpoint applies a probability-based algorithm to the percentage that you specify. Therefore, the actual percentage of participants who are held out may not be equal to the percentage that you specify.

JourneyCustomMessage

Specifies the message content for a custom channel message that's sent to participants in a journey.

Property	Type	Required	Description
Data	string	False	The message content that's passed to an AWS Lambda function or to a web hook.

JourneyEmailMessage

Specifies the "From" address for an email message that's sent to participants in a journey.

Property	Type	Required	Description
FromAddress	string	False	The verified email address to send the email message from. The default address is the FromAddress specified for the email channel for the application.

JourneyLimits

Specifies limits on the messages that a journey can send and the number of times participants can enter a journey.

Property	Type	Required	Description
DailyCap	integer	False	The maximum number of messages that the journey can send to a single participant during a 24-hour period. The maximum value is 100.
EndpointReentryCap	integer	False	The maximum number of times that a participant can enter the journey. The maximum value is 100. To allow participants to enter the journey an unlimited number of times, set this value to 0.
EndpointReentryInterval	string	False	Minimum time that must pass before an endpoint can re-enter a given journey.
MessagesPerSecond	integer	False	The maximum number of messages that the journey can send each second.
TimeframeCap	JourneyTimeframeCap	False	The number of messages that an endpoint can receive during the specified timeframe.
TotalCap	integer	False	The maximum number of messages a journey can sent to a single endpoint. The maximum value is 100. If set to 0, this limit will not apply.

JourneyPushMessage

Specifies the message configuration for a push notification that's sent to participants in a journey.

Property	Type	Required	Description
TimeToLive	string	False	The number of seconds that the push notification service should keep the message, if the service is unable to deliver the notification the first time. This value is converted to an expiration value when it's sent to a push notification service. If this value is 0, the service treats the notification as if it expires immediately and the service doesn't store or try to deliver the notification again. This value doesn't apply to messages that are sent through the Amazon Device Messaging (ADM) service.

JourneyResponse

Provides information about the status, configuration, and other settings for a journey.

Property	Type	Required	Description
Activities	object	False	A map that contains a set of Activity objects, one object for each activity in the journey. For each Activity object, the key is the unique identifier (string) for an activity and the value is the settings for the activity.
ApplicationId	string	True	The unique identifier for the application that the journey applies to.
ClosedDays	ClosedDays	False	The time when a journey will not send messages. QuietTime should be configured first and SendingSchedule should be set to true.
CreationDate	string	False	The date, in ISO 8601 format, when the journey was created.
Id	string	True	The unique identifier for the journey.
LastModifiedDate	string	False	The date, in ISO 8601 format, when the journey was last modified.
Limits	JourneyLimits	False	The messaging and entry limits for the journey.
LocalTime	boolean	False	Specifies whether the journey's scheduled start and end times use each participant's local time. If this value is true, the schedule uses each participant's local time.
Name	string	False	The name of the journey.
OpenHours	OpenHours	False	The time when a journey can send messages. QuietTime should be configured first and SendingSchedule should be set to true.
QuietTime	QuietTime	False	The quiet time settings for the journey. Quiet time is a specific time range when a journey doesn't send messages to participants, if all the following conditions are met: The EndpointDemographic.Timezone property of the endpoint for the participant is set to a valid value. The current time in the participant's time zone is later than or equal to the time specified by the QuietTime.Start property for the journey. The current time in the participant's time zone is earlier than or equal to the time specified by the QuietTime.End property for the journey. If any of the preceding conditions isn't met, the participant will receive messages from the journey, even if quiet time is enabled.
RefreshFrequency	string	False	The frequency with which Amazon Pinpoint evaluates segment and event data for the journey, as a duration in ISO 8601 format.
RefreshOnSegmentUpdate	boolean	False	Indicates whether the journey participants should be refreshed when a segment is updated.
Schedule	JourneySchedule	False	The schedule settings for the journey.
SendingSchedule	boolean	False	Indicates if journey has Advance Quiet Time enabled. This flag should be set to true in order to allow using OpenHours and ClosedDays.
StartActivity	string	False	The unique identifier for the first activity in the journey.
StartCondition	StartCondition	False	The segment that defines which users are participants in the journey.
State	string Values: DRAFT | ACTIVE | PAUSED | COMPLETED | CANCELLED | CLOSED | PENDING_APPROVAL	False	The current status of the journey. Possible values are: DRAFT – The journey is being developed and hasn't been published yet. ACTIVE – The journey has been developed and published. Depending on the journey's schedule, the journey may currently be running or scheduled to start running at a later time. If a journey's status is ACTIVE, you can't add, change, or remove activities from it. COMPLETED – The journey has been published and has finished running. All participants have entered the journey and no participants are waiting to complete the journey or any activities in the journey. CANCELLED – The journey has been stopped. If a journey's status is CANCELLED, you can't add, change, or remove activities or segment settings from the journey. CLOSED – The journey has been published and has started running. It may have also passed its scheduled end time, or passed its scheduled start time and a refresh frequency hasn't been specified for it. If a journey's status is CLOSED, you can't add participants to it, and no existing participants can enter the journey for the first time. However, any existing participants who are currently waiting to start an activity may continue the journey. Note A journey in the CLOSED state is still counted against the Maximum number of active journeys quota. For more information see Journey quotas.
tags	object	False	This object is not used or supported.
TimezoneEstimationMethods	Array of type string Values: PHONE_NUMBER | POSTAL_CODE	False	An array of time zone estimation methods, if any, to use for determining an Endpoints time zone if the Endpoint does not have a value for the Demographic.Timezone attribute. PHONE_NUMBER - A time zone is estimated based on the Endpoint.Location.Country and Endpoint.Address. POSTAL_CODE - A time zone is estimated based on the Endpoint.Location.Country and Endpoint.Location.PostalCode. Note POSTAL_CODE estimation is only supported in the United States, United Kingdom, Australia, New Zealand, Canada, France, Italy, Spain, Germany and in regions where Amazon Pinpoint is available. Both - A time zone is estimated based on the Endpoint.Location.Country, Endpoint.Address and Endpoint.Location.PostalCode.
WaitForQuietTime	boolean	False	Indicates whether endpoints in quiet hours should enter a wait activity until quiet hours have elapsed.

JourneySMSMessage

Specifies the sender ID and message type for an SMS message that's sent to participants in a journey.

Property	Type	Required	Description
EntityId	string	False	A registered Entity ID (currently only used when sending messages to recipients in India).
MessageType	string Values: TRANSACTIONAL | PROMOTIONAL	False	The SMS message type. Valid values are TRANSACTIONAL (for messages that are critical or time-sensitive, such as a one-time passwords) and PROMOTIONAL (for messsages that aren't critical or time-sensitive, such as marketing messages).
OriginationNumber	string	False	The number to send the SMS message from. The phone number that you specify must exist in your Amazon Pinpoint account—you can't pass an arbitrary phone number. If you want to use a sender ID to send your message, omit this parameter and use SenderId instead.
SenderId	string	False	The sender ID to display as the sender of the message on a recipient's device. Support for sender IDs varies by country. For more information, see Supported Countries and Regions in the Amazon Pinpoint User Guide.
TemplateId	string	False	A registered Template ID (currently only used when sending messages to recipients in India).

JourneySchedule

Specifies the schedule settings for a journey.

Property	Type	Required	Description
EndTime	string	False	The scheduled time, in ISO 8601 format, when the journey ended or will end.
StartTime	string	False	The scheduled time, in ISO 8601 format, when the journey began or will begin.
Timezone	string	False	The starting UTC offset for the journey schedule, if the value of the journey's LocalTime property is true. Valid values are: UTC, UTC+01, UTC+02, UTC+03, UTC+03:30, UTC+04, UTC+04:30, UTC+05, UTC+05:30, UTC+05:45, UTC+06, UTC+06:30, UTC+07, UTC+08, UTC+08:45, UTC+09, UTC+09:30, UTC+10, UTC+10:30, UTC+11, UTC+12, UTC+12:45, UTC+13, UTC+13:45, UTC-02, UTC-02:30, UTC-03, UTC-03:30, UTC-04, UTC-05, UTC-06, UTC-07, UTC-08, UTC-09, UTC-09:30, UTC-10, and UTC-11.

JourneyStateRequest

Changes the status of a journey.

Property	Type	Required	Description
State	string Values: DRAFT | ACTIVE | PAUSED | COMPLETED | CANCELLED | CLOSED | PENDING_APPROVAL	True	The status of the journey. Currently, the supported values are ACTIVE, PAUSED, and CANCELLED. If you cancel a journey, Amazon Pinpoint continues to perform activities that are currently in progress, until those activities are complete. Amazon Pinpoint also continues to collect and aggregate analytics data for those activities, until they are complete, and any activities that were complete when you cancelled the journey. After you cancel a journey, you can't add, change, or remove any activities from the journey. In addition, Amazon Pinpoint stops evaluating the journey and doesn't perform any activities that haven't started. When the journey is paused, Amazon Pinpoint continues to perform activities that are currently in progress, until those activities are complete. Endpoints will stop entering journeys when the journey is paused and will resume entering the journey after the journey is resumed. For wait activities, wait time is paused when the journey is paused. Currently, PAUSED only supports journeys with a segment refresh interval.

JourneyTimeframeCap

The number of messages that can be sent to an endpoint during the specified timeframe for all journeys.

Property	Type	Required	Description
Cap	integer	False	The maximum number of messages that all journeys can send to an endpoint during the specified timeframe. The maximum value is 100. If set to 0, this limit will not apply.
Days	integer	False	The length of the timeframe in days. The maximum value is 30. If set to 0, this limit will not apply.

MessageBody

Provides information about an API request or response.

Property	Type	Required	Description
Message	string	False	The message that's returned from the API.
RequestID	string	False	The unique identifier for the request or response.

MetricDimension

Specifies metric-based criteria for including or excluding endpoints from a segment. These criteria derive from custom metrics that you define for endpoints.

Property	Type	Required	Description
ComparisonOperator	string	True	The operator to use when comparing metric values. Valid values are: GREATER_THAN, LESS_THAN, GREATER_THAN_OR_EQUAL, LESS_THAN_OR_EQUAL, and EQUAL.
Value	number	True	The value to compare.

MultiConditionalBranch

Specifies a condition to evaluate for an activity path in a journey.

Property	Type	Required	Description
Condition	SimpleCondition	False	The condition to evaluate for the activity path.
NextActivity	string	False	The unique identifier for the next activity to perform, after completing the activity for the path.

MultiConditionalSplitActivity

Specifies the settings for a multivariate split activity in a journey. This type of activity sends participants down one of as many as five paths (including a default Else path) in a journey, based on conditions that you specify.

Note

To create multivariate split activities that send participants down different paths based on push notification events (such as Open or Received events), your mobile app has to specify the User ID and Endpoint ID values. For more information, see Integrating Amazon Pinpoint with your application in the Amazon Pinpoint Developer Guide.

Property	Type	Required	Description
Branches	Array of type MultiConditionalBranch	False	The paths for the activity, including the conditions for entering each path and the activity to perform for each path.
DefaultActivity	string	False	The unique identifier for the activity to perform for participants who don't meet any of the conditions specified for other paths in the activity.
EvaluationWaitTime	WaitTime	False	The amount of time to wait or the date and time when Amazon Pinpoint determines whether the conditions are met.

OpenHours

Specifies the times when message are allowed to be sent to endpoints.

Property	Type	Required	Description
CUSTOM	object	False	Specifies the schedule settings for the custom channel.
EMAIL	object	False	Specifies the schedule settings for the email channel.
PUSH	object	False	Specifies the schedule settings for the push channel.
SMS	object	False	Specifies the schedule settings for the SMS channel.
VOICE	object	False	Specifies the schedule settings for the voice channel.

OpenHoursRule

Specifies the start and end time for OpenHours.

Property	Type	Required	Description
EndTime	string	True	The end of the scheduled time, in ISO 8601 format, when the channel can't send messages.
StartTime	string	True	The start of the scheduled time, in ISO 8601 format, when the channel can send messages.

PushMessageActivity

Specifies the settings for a push notification activity in a journey. This type of activity sends a push notification to participants.

Property	Type	Required	Description
MessageConfig	JourneyPushMessage	False	Specifies the time to live (TTL) value for push notifications that are sent to participants in a journey.
NextActivity	string	False	The unique identifier for the next activity to perform, after the message is sent.
TemplateName	string	False	The name of the push notification template to use for the message. If specified, this value must match the name of an existing message template.
TemplateVersion	string	False	The unique identifier for the version of the push notification template to use for the message. If specified, this value must match the identifier for an existing template version. To retrieve a list of versions and version identifiers for a template, use the Template Versionsresource. If you don't specify a value for this property, Amazon Pinpoint uses the active version of the template. The active version is typically the version of a template that's been most recently reviewed and approved for use, depending on your workflow. It isn't necessarily the latest version of a template.

QuietTime

Specifies the start and end times that define a time range when messages aren't sent to endpoints.

Property	Type	Required	Description
End	string	False	The specific time when quiet time ends. This value has to use 24-hour notation and be in HH:MM format, where HH is the hour (with a leading zero, if applicable) and MM is the minutes. For example, use 02:30 to represent 2:30 AM, or 14:30 to represent 2:30 PM.
Start	string	False	The specific time when quiet time begins. This value has to use 24-hour notation and be in HH:MM format, where HH is the hour (with a leading zero, if applicable) and MM is the minutes. For example, use 02:30 to represent 2:30 AM, or 14:30 to represent 2:30 PM.

RandomSplitActivity

Specifies the settings for a random split activity in a journey. This type of activity randomly sends specified percentages of participants down one of as many as five paths in a journey, based on conditions that you specify.

Property	Type	Required	Description
Branches	Array of type RandomSplitEntry	False	The paths for the activity, including the percentage of participants to enter each path and the activity to perform for each path.

RandomSplitEntry

Specifies the settings for a path in a random split activity in a journey.

Property	Type	Required	Description
NextActivity	string	False	The unique identifier for the next activity to perform, after completing the activity for the path.
Percentage	integer	False	The percentage of participants to send down the activity path. To determine which participants are sent down each path, Amazon Pinpoint applies a probability-based algorithm to the percentages that you specify for the paths. Therefore, the actual percentage of participants who are sent down a path may not be equal to the percentage that you specify.

RecencyDimension

Specifies criteria for including or excluding endpoints from a segment based on how recently an endpoint was active.

Property	Type	Required	Description
Duration	string Values: HR_24 | DAY_7 | DAY_14 | DAY_30	True	The duration to use when determining whether an endpoint is active or inactive.
RecencyType	string Values: ACTIVE | INACTIVE	True	The type of recency dimension to use for the segment. Valid values are: ACTIVE, endpoints that were active within the specified duration are included in the segment; and, INACTIVE, endpoints that weren't active within the specified duration are included in the segment.

SMSMessageActivity

Specifies the settings for an SMS activity in a journey. This type of activity sends a text message to participants.

Property	Type	Required	Description
MessageConfig	JourneySMSMessage	False	Specifies the sender ID and message type for an SMS message that's sent to participants in a journey.
NextActivity	string	False	The unique identifier for the next activity to perform, after the message is sent.
TemplateName	string	False	The name of the SMS message template to use for the message. If specified, this value must match the name of an existing message template.
TemplateVersion	string	False	The unique identifier for the version of the SMS template to use for the message. If specified, this value must match the identifier for an existing template version. To retrieve a list of versions and version identifiers for a template, use the Template Versions resource. If you don't specify a value for this property, Amazon Pinpoint uses the active version of the template. The active version is typically the version of a template that's been most recently reviewed and approved for use, depending on your workflow. It isn't necessarily the latest version of a template.

SegmentBehaviors

Specifies dimension settings for including or excluding endpoints from a segment based on how recently an endpoint was active.

Property	Type	Required	Description
Recency	RecencyDimension	False	The dimension settings that are based on how recently an endpoint was active.

SegmentCondition

Specifies a segment to associate with an activity in a journey.

Property	Type	Required	Description
SegmentId	string	True	The unique identifier for the segment to associate with the activity.

SegmentDemographics

Specifies demographic-based dimension settings for including or excluding endpoints from a segment. These settings derive from characteristics of endpoint devices, such as platform, make, and model.

Property	Type	Required	Description
AppVersion	SetDimension	False	The app version criteria for the segment.
Channel	SetDimension	False	The channel criteria for the segment.
DeviceType	SetDimension	False	The device type criteria for the segment.
Make	SetDimension	False	The device make criteria for the segment.
Model	SetDimension	False	The device model criteria for the segment.
Platform	SetDimension	False	The device platform criteria for the segment.

SegmentDimensions

Specifies the dimension settings for a segment.

Property	Type	Required	Description
Attributes	object	False	One or more custom attributes to use as criteria for the segment. For more information see AttributeDimension
Behavior	SegmentBehaviors	False	The behavior-based criteria, such as how recently users have used your app, for the segment.
Demographic	SegmentDemographics	False	The demographic-based criteria, such as device platform, for the segment.
Location	SegmentLocation	False	The location-based criteria, such as region or GPS coordinates, for the segment.
Metrics	object	False	One or more custom metrics to use as criteria for the segment.
UserAttributes	object	False	One or more custom user attributes to use as criteria for the segment.

SegmentLocation

Specifies geographical dimension settings for a segment.

Property	Type	Required	Description
Country	SetDimension	False	The country or region code, in ISO 3166-1 alpha-2 format, for the segment.
GPSPoint	GPSPointDimension	False	The GPS location and range for the segment.

SetDimension

Specifies the dimension type and values for a segment dimension.

Property	Type	Required	Description
DimensionType	string Values: INCLUSIVE | EXCLUSIVE	False	The type of segment dimension to use. Valid values are: INCLUSIVE, endpoints that match the criteria are included in the segment; and, EXCLUSIVE, endpoints that match the criteria are excluded from the segment.
Values	Array of type string	True	The criteria values to use for the segment dimension. Depending on the value of the DimensionType property, endpoints are included or excluded from the segment if their values match the criteria values.

SimpleCondition

Specifies a condition to evaluate for an activity in a journey.

Property	Type	Required	Description
EventCondition	EventCondition	False	The dimension settings for the event that's associated with the activity.
SegmentCondition	SegmentCondition	False	The segment that's associated with the activity.
segmentDimensions	SegmentDimensions	False	The dimension settings for the segment that's associated with the activity.

StartCondition

Specifies the conditions for the first activity in a journey. This activity and its conditions determine which users are participants in a journey.

Property	Type	Required	Description
Description	string	False	The custom description of the condition.
EventStartCondition	EventStartCondition	False	The event start condition that can trigger a journey.
SegmentStartCondition	SegmentCondition	False	The segment that's associated with the first activity in the journey. This segment determines which users are participants in the journey.

WaitActivity

Specifies the settings for a wait activity in a journey. This type of activity waits for a certain amount of time or until a specific date and time before moving participants to the next activity in a journey.

Property	Type	Required	Description
NextActivity	string	False	The unique identifier for the next activity to perform, after performing the wait activity.
WaitTime	WaitTime	False	The amount of time to wait or the date and time when the activity moves participants to the next activity in the journey.

WaitTime

Specifies a duration or a date and time that indicates when Amazon Pinpoint determines whether an activity's conditions have been met or an activity moves participants to the next activity in a journey.

Property	Type	Required	Description
WaitFor	string	False	The amount of time to wait, as a duration in ISO 8601 format, before determining whether the activity's conditions have been met or moving participants to the next activity in the journey.
WaitUntil	string	False	The date and time, in ISO 8601 format, when Amazon Pinpoint determines whether the activity's conditions have been met or the activity moves participants to the next activity in the journey.

See also

For more information about using this API in one of the language-specific AWS SDKs and references, see the following:

UpdateJourneyState

• AWS Command Line Interface

• AWS SDK for .NET

• AWS SDK for C++

• AWS SDK for Go v2

• AWS SDK for Java V2

• AWS SDK for JavaScript V3

• AWS SDK for PHP V3

• AWS SDK for Python

• AWS SDK for Ruby V3