AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Elastic Compute Cloud (EC2) AssociateVpcCidrBlock API operation.

Syntax

Register-EC2VpcCidrBlock
-VpcId <String>
-AmazonProvidedIpv6CidrBlock <Boolean>
-CidrBlock <String>
-Ipv4IpamPoolId <String>
-Ipv4NetmaskLength <Int32>
-Ipv6CidrBlock <String>
-Ipv6CidrBlockNetworkBorderGroup <String>
-Ipv6IpamPoolId <String>
-Ipv6NetmaskLength <Int32>
-Ipv6Pool <String>
-Select <String>
-PassThru <SwitchParameter>
-Force <SwitchParameter>
-ClientConfig <AmazonEC2Config>

Description

Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see IP addressing for your VPCs and subnets in the Amazon VPC User Guide.

Parameters

-AmazonProvidedIpv6CidrBlock <Boolean>
Requests an Amazon-provided IPv6 CIDR block with a /56 prefix length for the VPC. You cannot specify the range of IPv6 addresses or the size of the CIDR block.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-CidrBlock <String>
An IPv4 CIDR block to associate with the VPC.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ClientConfig <AmazonEC2Config>
Amazon.PowerShell.Cmdlets.EC2.AmazonEC2ClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Ipv4IpamPoolId <String>
Associate a CIDR allocated from an IPv4 IPAM pool to a VPC. For more information about Amazon VPC IP Address Manager (IPAM), see What is IPAM? in the Amazon VPC IPAM User Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Ipv4NetmaskLength <Int32>
The netmask length of the IPv4 CIDR you would like to associate from an Amazon VPC IP Address Manager (IPAM) pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Ipv6CidrBlock <String>
An IPv6 CIDR block from the IPv6 address pool. You must also specify Ipv6Pool in the request.To let Amazon choose the IPv6 CIDR block for you, omit this parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Ipv6CidrBlockNetworkBorderGroup <String>
The name of the location from which we advertise the IPV6 CIDR block. Use this parameter to limit the CIDR block to this location. You must set AmazonProvidedIpv6CidrBlock to true to use this parameter. You can have one IPv6 CIDR block association per network border group.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Ipv6IpamPoolId <String>
Associates a CIDR allocated from an IPv6 IPAM pool to a VPC. For more information about Amazon VPC IP Address Manager (IPAM), see What is IPAM? in the Amazon VPC IPAM User Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Ipv6NetmaskLength <Int32>
The netmask length of the IPv6 CIDR you would like to associate from an Amazon VPC IP Address Manager (IPAM) pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Ipv6Pool <String>
The ID of an IPv6 address pool from which to allocate the IPv6 CIDR block.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the VpcId parameter. The -PassThru parameter is deprecated, use -Select '^VpcId' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EC2.Model.AssociateVpcCidrBlockResponse). Specifying the name of a property of type Amazon.EC2.Model.AssociateVpcCidrBlockResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-VpcId <String>
The ID of the VPC.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

This cmdlet returns an Amazon.EC2.Model.AssociateVpcCidrBlockResponse object containing multiple properties.

Supported Version

AWS Tools for PowerShell: 2.x.y.z