AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Simple Email Service (SES) SendBulkTemplatedEmail API operation.

Syntax

Send-SESBulkTemplatedEmail
-Source <String>
-ConfigurationSetName <String>
-DefaultTag <MessageTag[]>
-DefaultTemplateData <String>
-Destination <BulkEmailDestination[]>
-ReplyToAddress <String[]>
-ReturnPath <String>
-ReturnPathArn <String>
-SourceArn <String>
-Template <String>
-TemplateArn <String>
-Select <String>
-Force <SwitchParameter>
-ClientConfig <AmazonSimpleEmailServiceConfig>

Description

Composes an email message to multiple destinations. The message body is created using an email template. To send email using this operation, your call must meet the following requirements:
  • The call must refer to an existing email template. You can create email templates using CreateTemplate.
  • The message must be sent from a verified email address or domain.
  • If your account is still in the Amazon SES sandbox, you may send only to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
  • The maximum message size is 10 MB.
  • Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.
  • The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.
  • The number of destinations you can contact in a single call can be limited by your account's maximum sending rate.

Parameters

-ClientConfig <AmazonSimpleEmailServiceConfig>
Amazon.PowerShell.Cmdlets.SES.AmazonSimpleEmailServiceClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ConfigurationSetName <String>
The name of the configuration set to use when you send an email using SendBulkTemplatedEmail.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DefaultTag <MessageTag[]>
A list of tags, in the form of name/value pairs, to apply to an email that you send to a destination using SendBulkTemplatedEmail. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesDefaultTags
-DefaultTemplateData <String>
A list of replacement values to apply to the template when replacement data is not specified in a Destination object. These values act as a default or fallback option when no other data is available.The template data is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
-Destination <BulkEmailDestination[]>
One or more Destination objects. All of the recipients in a Destination receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesDestinations
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ReplyToAddress <String[]>
The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesReplyToAddresses
-ReturnPath <String>
The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ReturnPathArn <String>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.For more information about sending authorization, see the Amazon SES Developer Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'Status'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SimpleEmail.Model.SendBulkTemplatedEmailResponse). Specifying the name of a property of type Amazon.SimpleEmail.Model.SendBulkTemplatedEmailResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Source <String>
The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-SourceArn <String>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.For more information about sending authorization, see the Amazon SES Developer Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Template <String>
The template to use when sending this email.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
-TemplateArn <String>
The ARN of the template to use when sending this email.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.SimpleEmail.Model.BulkEmailDestinationStatus or Amazon.SimpleEmail.Model.SendBulkTemplatedEmailResponse
This cmdlet returns a collection of Amazon.SimpleEmail.Model.BulkEmailDestinationStatus objects. The service call response (type Amazon.SimpleEmail.Model.SendBulkTemplatedEmailResponse) can be returned by specifying '-Select *'.
Developer Guide
Service API Reference
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z