Kinesis 示例使用 SDK SAP ABAP

下列程式碼範例說明如何使用 to SAP ABAP 搭配 Kinesis 來執行動作和實作常見案 AWS SDK例。

基本概念是程式碼範例，會示範如何在服務中執行基本作業。

Actions 是大型程式的程式碼摘錄，必須在內容中執行。雖然動作會顯示如何呼叫個別服務函數，但您可以在其相關案例中查看內容中的動作。

每個範例都包含完整原始程式碼的連結，您可以在其中找到如何在內容中設定和執行程式碼的指示。

主題

基本概念
動作

基本概念

以下程式碼範例顯示做法：

創建一個流並在其中放置一條記錄。
創建一個碎片迭代器。
閱讀記錄，然後清理資源。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。



    DATA lo_stream_describe_result TYPE REF TO /aws1/cl_knsdescrstreamoutput.
    DATA lo_stream_description TYPE REF TO /aws1/cl_knsstreamdescription.
    DATA lo_sharditerator TYPE REF TO /aws1/cl_knsgetsharditerator01.
    DATA lo_record_result TYPE REF TO /aws1/cl_knsputrecordoutput.

    "Create stream."
    TRY.
        lo_kns->createstream(
            iv_streamname = iv_stream_name
            iv_shardcount = iv_shard_count
        ).
        MESSAGE 'Stream created.' TYPE 'I'.
      CATCH /aws1/cx_knsinvalidargumentex.
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_knslimitexceededex .
        MESSAGE 'The request processing has failed because of a limit exceeded exception.' TYPE 'E'.
      CATCH /aws1/cx_knsresourceinuseex .
        MESSAGE 'The request processing has failed because the resource is in use.' TYPE 'E'.
    ENDTRY.

    "Wait for stream to becomes active."
    lo_stream_describe_result = lo_kns->describestream( iv_streamname = iv_stream_name ).
    lo_stream_description = lo_stream_describe_result->get_streamdescription( ).
    WHILE lo_stream_description->get_streamstatus( ) <> 'ACTIVE'.
      IF sy-index = 30.
        EXIT.               "maximum 5 minutes"
      ENDIF.
      WAIT UP TO 10 SECONDS.
      lo_stream_describe_result = lo_kns->describestream( iv_streamname = iv_stream_name ).
      lo_stream_description =  lo_stream_describe_result->get_streamdescription( ).
    ENDWHILE.

    "Create record."
    TRY.
        lo_record_result = lo_kns->putrecord(
            iv_streamname = iv_stream_name
            iv_data       = iv_data
            iv_partitionkey = iv_partition_key
        ).
        MESSAGE 'Record created.' TYPE 'I'.
      CATCH /aws1/cx_knsinvalidargumentex .
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_knskmsaccessdeniedex .
        MESSAGE 'You do not have permission to perform this AWS KMS action.' TYPE 'E'.
      CATCH /aws1/cx_knskmsdisabledex .
        MESSAGE 'KMS key used is disabled.' TYPE 'E'.
      CATCH /aws1/cx_knskmsinvalidstateex .
        MESSAGE 'KMS key used is in an invalid state. ' TYPE 'E'.
      CATCH /aws1/cx_knskmsnotfoundex .
        MESSAGE 'KMS key used is not found.' TYPE 'E'.
      CATCH /aws1/cx_knskmsoptinrequired .
        MESSAGE 'KMS key option is required.' TYPE 'E'.
      CATCH /aws1/cx_knskmsthrottlingex .
        MESSAGE 'The rate of requests to AWS KMS is exceeding the request quotas.' TYPE 'E'.
      CATCH /aws1/cx_knsprovthruputexcdex .
        MESSAGE 'The request rate for the stream is too high, or the requested data is too large for the available throughput.' TYPE 'E'.
      CATCH /aws1/cx_knsresourcenotfoundex .
        MESSAGE 'Resource being accessed is not found.' TYPE 'E'.
    ENDTRY.

    "Create a shard iterator in order to read the record."
    TRY.
        lo_sharditerator = lo_kns->getsharditerator(
          iv_shardid = lo_record_result->get_shardid( )
          iv_sharditeratortype = iv_sharditeratortype
          iv_streamname = iv_stream_name
      ).
        MESSAGE 'Shard iterator created.' TYPE 'I'.
      CATCH /aws1/cx_knsinvalidargumentex.
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_knsprovthruputexcdex .
        MESSAGE 'The request rate for the stream is too high, or the requested data is too large for the available throughput.' TYPE 'E'.
      CATCH /aws1/cx_sgmresourcenotfound.
        MESSAGE 'Resource being accessed is not found.' TYPE 'E'.
    ENDTRY.

    "Read the record."
    TRY.
        oo_result = lo_kns->getrecords(                    " oo_result is returned for testing purposes. "
            iv_sharditerator   = lo_sharditerator->get_sharditerator( )
        ).
        MESSAGE 'Shard iterator created.' TYPE 'I'.
      CATCH /aws1/cx_knsexpirediteratorex .
        MESSAGE 'Iterator expired.' TYPE 'E'.
      CATCH /aws1/cx_knsinvalidargumentex .
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_knskmsaccessdeniedex .
        MESSAGE 'You do not have permission to perform this AWS KMS action.' TYPE 'E'.
      CATCH /aws1/cx_knskmsdisabledex .
        MESSAGE 'KMS key used is disabled.' TYPE 'E'.
      CATCH /aws1/cx_knskmsinvalidstateex .
        MESSAGE 'KMS key used is in an invalid state. ' TYPE 'E'.
      CATCH /aws1/cx_knskmsnotfoundex .
        MESSAGE 'KMS key used is not found.' TYPE 'E'.
      CATCH /aws1/cx_knskmsoptinrequired .
        MESSAGE 'KMS key option is required.' TYPE 'E'.
      CATCH /aws1/cx_knskmsthrottlingex .
        MESSAGE 'The rate of requests to AWS KMS is exceeding the request quotas.' TYPE 'E'.
      CATCH /aws1/cx_knsprovthruputexcdex .
        MESSAGE 'The request rate for the stream is too high, or the requested data is too large for the available throughput.' TYPE 'E'.
      CATCH /aws1/cx_knsresourcenotfoundex .
        MESSAGE 'Resource being accessed is not found.' TYPE 'E'.
    ENDTRY.

    "Delete stream."
    TRY.
        lo_kns->deletestream(
            iv_streamname = iv_stream_name
        ).
        MESSAGE 'Stream deleted.' TYPE 'I'.
      CATCH /aws1/cx_knslimitexceededex .
        MESSAGE 'The request processing has failed because of a limit exceeded exception.' TYPE 'E'.
      CATCH /aws1/cx_knsresourceinuseex .
        MESSAGE 'The request processing has failed because the resource is in use.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱中的下列主題以AWS SDK供SAPABAPAPI參考。

動作

下列程式碼範例會示範如何使用CreateStream。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。


    TRY.
        lo_kns->createstream(
            iv_streamname = iv_stream_name
            iv_shardcount = iv_shard_count
        ).
        MESSAGE 'Stream created.' TYPE 'I'.
      CATCH /aws1/cx_knsinvalidargumentex.
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_knslimitexceededex .
        MESSAGE 'The request processing has failed because of a limit exceed exception.' TYPE 'E'.
      CATCH /aws1/cx_knsresourceinuseex .
        MESSAGE 'The request processing has failed because the resource is in use.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱CreateStream中AWS SDK的以供SAPABAPAPI參考。

下列程式碼範例會示範如何使用DeleteStream。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。


    TRY.
        lo_kns->deletestream(
            iv_streamname = iv_stream_name
        ).
        MESSAGE 'Stream deleted.' TYPE 'I'.
      CATCH /aws1/cx_knslimitexceededex .
        MESSAGE 'The request processing has failed because of a limit exceed exception.' TYPE 'E'.
      CATCH /aws1/cx_knsresourceinuseex .
        MESSAGE 'The request processing has failed because the resource is in use.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱DeleteStream中AWS SDK的以供SAPABAPAPI參考。

下列程式碼範例會示範如何使用DescribeStream。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。


    TRY.
        oo_result = lo_kns->describestream(
            iv_streamname = iv_stream_name
        ).
        DATA(lt_stream_description) = oo_result->get_streamdescription( ).
        MESSAGE 'Streams retrieved.' TYPE 'I'.
      CATCH /aws1/cx_knslimitexceededex .
        MESSAGE 'The request processing has failed because of a limit exceed exception.' TYPE 'E'.
      CATCH /aws1/cx_knsresourcenotfoundex .
        MESSAGE 'Resource being accessed is not found.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱DescribeStream中AWS SDK的以供SAPABAPAPI參考。

下列程式碼範例會示範如何使用GetRecords。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。


    TRY.
        oo_result = lo_kns->getrecords(             " oo_result is returned for testing purposes. "
            iv_sharditerator = iv_shard_iterator
        ).
        DATA(lt_records) = oo_result->get_records( ).
        MESSAGE 'Record retrieved.' TYPE 'I'.
      CATCH /aws1/cx_knsexpirediteratorex .
        MESSAGE 'Iterator expired.' TYPE 'E'.
      CATCH /aws1/cx_knsinvalidargumentex .
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_knskmsaccessdeniedex .
        MESSAGE 'You do not have permission to perform this AWS KMS action.' TYPE 'E'.
      CATCH /aws1/cx_knskmsdisabledex .
        MESSAGE 'KMS key used is disabled.' TYPE 'E'.
      CATCH /aws1/cx_knskmsinvalidstateex .
        MESSAGE 'KMS key used is in an invalid state. ' TYPE 'E'.
      CATCH /aws1/cx_knskmsnotfoundex .
        MESSAGE 'KMS key used is not found.' TYPE 'E'.
      CATCH /aws1/cx_knskmsoptinrequired .
        MESSAGE 'KMS key option is required.' TYPE 'E'.
      CATCH /aws1/cx_knskmsthrottlingex .
        MESSAGE 'The rate of requests to AWS KMS is exceeding the request quotas.' TYPE 'E'.
      CATCH /aws1/cx_knsprovthruputexcdex .
        MESSAGE 'The request rate for the stream is too high, or the requested data is too large for the available throughput.' TYPE 'E'.
      CATCH /aws1/cx_knsresourcenotfoundex .
        MESSAGE 'Resource being accessed is not found.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱GetRecords中AWS SDK的以供SAPABAPAPI參考。

下列程式碼範例會示範如何使用ListStreams。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。


    TRY.
        oo_result = lo_kns->liststreams(        " oo_result is returned for testing purposes. "
            "Set Limit to specify that a maximum of streams should be returned."
            iv_limit = iv_limit
        ).
        DATA(lt_streams) = oo_result->get_streamnames( ).
        MESSAGE 'Streams listed.' TYPE 'I'.
      CATCH /aws1/cx_knslimitexceededex .
        MESSAGE 'The request processing has failed because of a limit exceed exception.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱ListStreams中AWS SDK的以供SAPABAPAPI參考。

下列程式碼範例會示範如何使用PutRecord。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。


    TRY.
        oo_result = lo_kns->putrecord(            " oo_result is returned for testing purposes. "
            iv_streamname = iv_stream_name
            iv_data       = iv_data
            iv_partitionkey = iv_partition_key
        ).
        MESSAGE 'Record created.' TYPE 'I'.
      CATCH /aws1/cx_knsinvalidargumentex .
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_knskmsaccessdeniedex .
        MESSAGE 'You do not have permission to perform this AWS KMS action.' TYPE 'E'.
      CATCH /aws1/cx_knskmsdisabledex .
        MESSAGE 'KMS key used is disabled.' TYPE 'E'.
      CATCH /aws1/cx_knskmsinvalidstateex .
        MESSAGE 'KMS key used is in an invalid state. ' TYPE 'E'.
      CATCH /aws1/cx_knskmsnotfoundex .
        MESSAGE 'KMS key used is not found.' TYPE 'E'.
      CATCH /aws1/cx_knskmsoptinrequired .
        MESSAGE 'KMS key option is required.' TYPE 'E'.
      CATCH /aws1/cx_knskmsthrottlingex .
        MESSAGE 'The rate of requests to AWS KMS is exceeding the request quotas.' TYPE 'E'.
      CATCH /aws1/cx_knsprovthruputexcdex .
        MESSAGE 'The request rate for the stream is too high, or the requested data is too large for the available throughput.' TYPE 'E'.
      CATCH /aws1/cx_knsresourcenotfoundex .
        MESSAGE 'Resource being accessed is not found.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱PutRecord中AWS SDK的以供SAPABAPAPI參考。

下列程式碼範例會示範如何使用RegisterStreamConsumer。

SDK對於 SAP ABAP

注意

還有更多關於 GitHub。尋找完整範例，並了解如何在 AWS 程式碼範例儲存庫中設定和執行。


    TRY.
        oo_result = lo_kns->registerstreamconsumer(       " oo_result is returned for testing purposes. "
            iv_streamarn = iv_stream_arn
            iv_consumername = iv_consumer_name
        ).
        MESSAGE 'Stream consumer registered.' TYPE 'I'.
      CATCH /aws1/cx_knsinvalidargumentex .
        MESSAGE 'The specified argument was not valid.' TYPE 'E'.
      CATCH /aws1/cx_sgmresourcelimitexcd.
        MESSAGE 'You have reached the limit on the number of resources.' TYPE 'E'.
      CATCH /aws1/cx_sgmresourceinuse.
        MESSAGE 'Resource being accessed is in use.' TYPE 'E'.
      CATCH /aws1/cx_sgmresourcenotfound.
        MESSAGE 'Resource being accessed is not found.' TYPE 'E'.
    ENDTRY.

如需詳API細資訊，請參閱RegisterStreamConsumer中AWS SDK的以供SAPABAPAPI參考。

您的瀏覽器已停用或無法使用 Javascript。

您必須啟用 Javascript，才能使用 AWS 文件。請參閱您的瀏覽器說明頁以取得說明。

文件慣用形式

Amazon EC2

Lambda