Table Of Contents

Feedback

User Guide

First time using the AWS CLI? See the User Guide for help getting started.

Note: You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . s3api ]

put-bucket-notification-configuration

Description

Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications .

Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type.

By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration .

NotificationConfiguration

/NotificationConfiguration

This operation replaces the existing notification configuration with the configuration you include in the request body.

After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of AWS Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events .

You can disable notifications by adding the empty NotificationConfiguration element.

By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with s3:PutBucketNotification permission.

Note

The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT operation will fail, and Amazon S3 will not add the configuration to your bucket.

Responses

If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic.

The following operation is related to PutBucketNotificationConfiguration :

See also: AWS API Documentation

See 'aws help' for descriptions of global parameters.

Synopsis

  put-bucket-notification-configuration
--bucket <value>
--notification-configuration <value>
[--expected-bucket-owner <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]

Options

--bucket (string)

The name of the bucket.

--notification-configuration (structure)

A container for specifying the notification configuration of the bucket. If this element is empty, notifications are turned off for the bucket.

TopicConfigurations -> (list)

The topic to which notifications are sent and the events for which notifications are generated.

(structure)

A container for specifying the configuration for publication of messages to an Amazon Simple Notification Service (Amazon SNS) topic when Amazon S3 detects specified events.

Id -> (string)

An optional unique identifier for configurations in a notification configuration. If you don't provide one, Amazon S3 will assign an ID.

TopicArn -> (string)

The Amazon Resource Name (ARN) of the Amazon SNS topic to which Amazon S3 publishes a message when it detects events of the specified type.

Events -> (list)

The Amazon S3 bucket event about which to send notifications. For more information, see Supported Event Types in the Amazon Simple Storage Service Developer Guide .

(string)

The bucket event for which to send notifications.

Filter -> (structure)

Specifies object key name filtering rules. For information about key name filtering, see Configuring Event Notifications in the Amazon Simple Storage Service Developer Guide .

Key -> (structure)

A container for object key name prefix and suffix filtering rules.

FilterRules -> (list)

A list of containers for the key-value pair that defines the criteria for the filter rule.

(structure)

Specifies the Amazon S3 object key name to filter on and whether to filter on the suffix or prefix of the key name.

Name -> (string)

The object key name prefix or suffix identifying one or more objects to which the filtering rule applies. The maximum length is 1,024 characters. Overlapping prefixes and suffixes are not supported. For more information, see Configuring Event Notifications in the Amazon Simple Storage Service Developer Guide .

Value -> (string)

The value that the filter searches for in object key names.

QueueConfigurations -> (list)

The Amazon Simple Queue Service queues to publish messages to and the events for which to publish messages.

(structure)

Specifies the configuration for publishing messages to an Amazon Simple Queue Service (Amazon SQS) queue when Amazon S3 detects specified events.

Id -> (string)

An optional unique identifier for configurations in a notification configuration. If you don't provide one, Amazon S3 will assign an ID.

QueueArn -> (string)

The Amazon Resource Name (ARN) of the Amazon SQS queue to which Amazon S3 publishes a message when it detects events of the specified type.

Events -> (list)

A collection of bucket events for which to send notifications

(string)

The bucket event for which to send notifications.

Filter -> (structure)

Specifies object key name filtering rules. For information about key name filtering, see Configuring Event Notifications in the Amazon Simple Storage Service Developer Guide .

Key -> (structure)

A container for object key name prefix and suffix filtering rules.

FilterRules -> (list)

A list of containers for the key-value pair that defines the criteria for the filter rule.

(structure)

Specifies the Amazon S3 object key name to filter on and whether to filter on the suffix or prefix of the key name.

Name -> (string)

The object key name prefix or suffix identifying one or more objects to which the filtering rule applies. The maximum length is 1,024 characters. Overlapping prefixes and suffixes are not supported. For more information, see Configuring Event Notifications in the Amazon Simple Storage Service Developer Guide .

Value -> (string)

The value that the filter searches for in object key names.

LambdaFunctionConfigurations -> (list)

Describes the AWS Lambda functions to invoke and the events for which to invoke them.

(structure)

A container for specifying the configuration for AWS Lambda notifications.

Id -> (string)

An optional unique identifier for configurations in a notification configuration. If you don't provide one, Amazon S3 will assign an ID.

LambdaFunctionArn -> (string)

The Amazon Resource Name (ARN) of the AWS Lambda function that Amazon S3 invokes when the specified event type occurs.

Events -> (list)

The Amazon S3 bucket event for which to invoke the AWS Lambda function. For more information, see Supported Event Types in the Amazon Simple Storage Service Developer Guide .

(string)

The bucket event for which to send notifications.

Filter -> (structure)

Specifies object key name filtering rules. For information about key name filtering, see Configuring Event Notifications in the Amazon Simple Storage Service Developer Guide .

Key -> (structure)

A container for object key name prefix and suffix filtering rules.

FilterRules -> (list)

A list of containers for the key-value pair that defines the criteria for the filter rule.

(structure)

Specifies the Amazon S3 object key name to filter on and whether to filter on the suffix or prefix of the key name.

Name -> (string)

The object key name prefix or suffix identifying one or more objects to which the filtering rule applies. The maximum length is 1,024 characters. Overlapping prefixes and suffixes are not supported. For more information, see Configuring Event Notifications in the Amazon Simple Storage Service Developer Guide .

Value -> (string)

The value that the filter searches for in object key names.

JSON Syntax:

{
  "TopicConfigurations": [
    {
      "Id": "string",
      "TopicArn": "string",
      "Events": ["s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold", ...],
      "Filter": {
        "Key": {
          "FilterRules": [
            {
              "Name": "prefix"|"suffix",
              "Value": "string"
            }
            ...
          ]
        }
      }
    }
    ...
  ],
  "QueueConfigurations": [
    {
      "Id": "string",
      "QueueArn": "string",
      "Events": ["s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold", ...],
      "Filter": {
        "Key": {
          "FilterRules": [
            {
              "Name": "prefix"|"suffix",
              "Value": "string"
            }
            ...
          ]
        }
      }
    }
    ...
  ],
  "LambdaFunctionConfigurations": [
    {
      "Id": "string",
      "LambdaFunctionArn": "string",
      "Events": ["s3:ReducedRedundancyLostObject"|"s3:ObjectCreated:*"|"s3:ObjectCreated:Put"|"s3:ObjectCreated:Post"|"s3:ObjectCreated:Copy"|"s3:ObjectCreated:CompleteMultipartUpload"|"s3:ObjectRemoved:*"|"s3:ObjectRemoved:Delete"|"s3:ObjectRemoved:DeleteMarkerCreated"|"s3:ObjectRestore:*"|"s3:ObjectRestore:Post"|"s3:ObjectRestore:Completed"|"s3:Replication:*"|"s3:Replication:OperationFailedReplication"|"s3:Replication:OperationNotTracked"|"s3:Replication:OperationMissedThreshold"|"s3:Replication:OperationReplicatedAfterThreshold", ...],
      "Filter": {
        "Key": {
          "FilterRules": [
            {
              "Name": "prefix"|"suffix",
              "Value": "string"
            }
            ...
          ]
        }
      }
    }
    ...
  ]
}

--expected-bucket-owner (string)

The account id of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See 'aws help' for descriptions of global parameters.

Examples

The applies a notification configuration to a bucket named my-bucket:

aws s3api put-bucket-notification-configuration --bucket my-bucket --notification-configuration file://notification.json

The file notification.json is a JSON document in the current folder that specifies an SNS topic and an event type to monitor:

 {
    "TopicConfigurations": [
        {
            "TopicArn": "arn:aws:sns:us-west-2:123456789012:s3-notification-topic",
            "Events": [
                "s3:ObjectCreated:*"
            ]
        }
    ]
}

The SNS topic must have an IAM policy attached to it that allows Amazon S3 to publish to it:

{
 "Version": "2008-10-17",
 "Id": "example-ID",
 "Statement": [
  {
   "Sid": "example-statement-ID",
   "Effect": "Allow",
   "Principal": {
     "Service": "s3.amazonaws.com"
   },
   "Action": [
    "SNS:Publish"
   ],
   "Resource": "arn:aws:sns:us-west-2:123456789012:my-bucket",
   "Condition": {
      "ArnLike": {
      "aws:SourceArn": "arn:aws:s3:*:*:my-bucket"
    }
   }
  }
 ]
}

Output

None