@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class HealthCheck extends Object implements Serializable, Cloneable, StructuredPojo
An object representing a container health check. Health check parameters that are specified in a container definition
override any Docker health checks that exist in the container image (such as those specified in a parent image or
from the image's Dockerfile). This configuration maps to the HEALTHCHECK
parameter of docker run.
The Amazon ECS container agent only monitors and reports on the health checks specified in the task definition. Amazon ECS does not monitor Docker health checks that are embedded in a container image and not specified in the container definition. Health check parameters that are specified in a container definition override any Docker health checks that exist in the container image.
You can view the health status of both individual containers and a task with the DescribeTasks API operation or when viewing the task details in the console.
The health check is designed to make sure that your containers survive agent restarts, upgrades, or temporary unavailability.
The following describes the possible healthStatus
values for a container:
HEALTHY
-The container health check has passed successfully.
UNHEALTHY
-The container health check has failed.
UNKNOWN
-The container health check is being evaluated or there's no container health check defined.
The following describes the possible healthStatus
values for a task. The container health check status
of non-essential containers don't have an effect on the health status of a task.
HEALTHY
-All essential containers within the task have passed their health checks.
UNHEALTHY
-One or more essential containers have failed their health check.
UNKNOWN
-The essential containers within the task are still having their health checks evaluated, there
are only nonessential containers with health checks defined, or there are no container health checks defined.
If a task is run manually, and not as part of a service, the task will continue its lifecycle regardless of its health status. For tasks that are part of a service, if the task reports as unhealthy then the task will be stopped and the service scheduler will replace it.
The following are notes about container health check support:
When the Amazon ECS agent cannot connect to the Amazon ECS service, the service reports the container as
UNHEALTHY
.
The health check statuses are the "last heard from" response from the Amazon ECS agent. There are no assumptions made about the status of the container health checks.
Container health checks require version 1.17.0 or greater of the Amazon ECS container agent. For more information, see Updating the Amazon ECS container agent.
Container health checks are supported for Fargate tasks if you're using platform version 1.1.0
or
greater. For more information, see Fargate platform
versions.
Container health checks aren't supported for tasks that are part of a service that's configured to use a Classic Load Balancer.
Constructor and Description |
---|
HealthCheck() |
Modifier and Type | Method and Description |
---|---|
HealthCheck |
clone() |
boolean |
equals(Object obj) |
List<String> |
getCommand()
A string array representing the command that the container runs to determine if it is healthy.
|
Integer |
getInterval()
The time period in seconds between each health check execution.
|
Integer |
getRetries()
The number of times to retry a failed health check before the container is considered unhealthy.
|
Integer |
getStartPeriod()
The optional grace period to provide containers time to bootstrap before failed health checks count towards the
maximum number of retries.
|
Integer |
getTimeout()
The time period in seconds to wait for a health check to succeed before it is considered a failure.
|
int |
hashCode() |
void |
marshall(ProtocolMarshaller protocolMarshaller)
Marshalls this structured data using the given
ProtocolMarshaller . |
void |
setCommand(Collection<String> command)
A string array representing the command that the container runs to determine if it is healthy.
|
void |
setInterval(Integer interval)
The time period in seconds between each health check execution.
|
void |
setRetries(Integer retries)
The number of times to retry a failed health check before the container is considered unhealthy.
|
void |
setStartPeriod(Integer startPeriod)
The optional grace period to provide containers time to bootstrap before failed health checks count towards the
maximum number of retries.
|
void |
setTimeout(Integer timeout)
The time period in seconds to wait for a health check to succeed before it is considered a failure.
|
String |
toString()
Returns a string representation of this object.
|
HealthCheck |
withCommand(Collection<String> command)
A string array representing the command that the container runs to determine if it is healthy.
|
HealthCheck |
withCommand(String... command)
A string array representing the command that the container runs to determine if it is healthy.
|
HealthCheck |
withInterval(Integer interval)
The time period in seconds between each health check execution.
|
HealthCheck |
withRetries(Integer retries)
The number of times to retry a failed health check before the container is considered unhealthy.
|
HealthCheck |
withStartPeriod(Integer startPeriod)
The optional grace period to provide containers time to bootstrap before failed health checks count towards the
maximum number of retries.
|
HealthCheck |
withTimeout(Integer timeout)
The time period in seconds to wait for a health check to succeed before it is considered a failure.
|
public List<String> getCommand()
A string array representing the command that the container runs to determine if it is healthy. The string array
must start with CMD
to run the command arguments directly, or CMD-SHELL
to run the
command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section of the
Docker Remote API.
CMD
to run the command arguments directly, or CMD-SHELL
to run the command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section
of the Docker Remote API.
public void setCommand(Collection<String> command)
A string array representing the command that the container runs to determine if it is healthy. The string array
must start with CMD
to run the command arguments directly, or CMD-SHELL
to run the
command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section of the
Docker Remote API.
command
- A string array representing the command that the container runs to determine if it is healthy. The string
array must start with CMD
to run the command arguments directly, or CMD-SHELL
to
run the command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section
of the Docker Remote API.
public HealthCheck withCommand(String... command)
A string array representing the command that the container runs to determine if it is healthy. The string array
must start with CMD
to run the command arguments directly, or CMD-SHELL
to run the
command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section of the
Docker Remote API.
NOTE: This method appends the values to the existing list (if any). Use
setCommand(java.util.Collection)
or withCommand(java.util.Collection)
if you want to override
the existing values.
command
- A string array representing the command that the container runs to determine if it is healthy. The string
array must start with CMD
to run the command arguments directly, or CMD-SHELL
to
run the command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section
of the Docker Remote API.
public HealthCheck withCommand(Collection<String> command)
A string array representing the command that the container runs to determine if it is healthy. The string array
must start with CMD
to run the command arguments directly, or CMD-SHELL
to run the
command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section of the
Docker Remote API.
command
- A string array representing the command that the container runs to determine if it is healthy. The string
array must start with CMD
to run the command arguments directly, or CMD-SHELL
to
run the command with the container's default shell.
When you use the Amazon Web Services Management Console JSON panel, the Command Line Interface, or the APIs, enclose the list of commands in double quotes and brackets.
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
You don't include the double quotes and brackets when you use the Amazon Web Services Management Console.
CMD-SHELL, curl -f http://localhost/ || exit 1
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see
HealthCheck
in the Create a container section
of the Docker Remote API.
public void setInterval(Integer interval)
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
interval
- The time period in seconds between each health check execution. You may specify between 5 and 300 seconds.
The default value is 30 seconds.public Integer getInterval()
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
public HealthCheck withInterval(Integer interval)
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
interval
- The time period in seconds between each health check execution. You may specify between 5 and 300 seconds.
The default value is 30 seconds.public void setTimeout(Integer timeout)
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
timeout
- The time period in seconds to wait for a health check to succeed before it is considered a failure. You
may specify between 2 and 60 seconds. The default value is 5.public Integer getTimeout()
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
public HealthCheck withTimeout(Integer timeout)
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
timeout
- The time period in seconds to wait for a health check to succeed before it is considered a failure. You
may specify between 2 and 60 seconds. The default value is 5.public void setRetries(Integer retries)
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
retries
- The number of times to retry a failed health check before the container is considered unhealthy. You may
specify between 1 and 10 retries. The default value is 3.public Integer getRetries()
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
public HealthCheck withRetries(Integer retries)
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
retries
- The number of times to retry a failed health check before the container is considered unhealthy. You may
specify between 1 and 10 retries. The default value is 3.public void setStartPeriod(Integer startPeriod)
The optional grace period to provide containers time to bootstrap before failed health checks count towards the
maximum number of retries. You can specify between 0 and 300 seconds. By default, the startPeriod
is
off.
If a health check succeeds within the startPeriod
, then the container is considered healthy and any
subsequent failures count toward the maximum number of retries.
startPeriod
- The optional grace period to provide containers time to bootstrap before failed health checks count
towards the maximum number of retries. You can specify between 0 and 300 seconds. By default, the
startPeriod
is off.
If a health check succeeds within the startPeriod
, then the container is considered healthy
and any subsequent failures count toward the maximum number of retries.
public Integer getStartPeriod()
The optional grace period to provide containers time to bootstrap before failed health checks count towards the
maximum number of retries. You can specify between 0 and 300 seconds. By default, the startPeriod
is
off.
If a health check succeeds within the startPeriod
, then the container is considered healthy and any
subsequent failures count toward the maximum number of retries.
startPeriod
is off.
If a health check succeeds within the startPeriod
, then the container is considered healthy
and any subsequent failures count toward the maximum number of retries.
public HealthCheck withStartPeriod(Integer startPeriod)
The optional grace period to provide containers time to bootstrap before failed health checks count towards the
maximum number of retries. You can specify between 0 and 300 seconds. By default, the startPeriod
is
off.
If a health check succeeds within the startPeriod
, then the container is considered healthy and any
subsequent failures count toward the maximum number of retries.
startPeriod
- The optional grace period to provide containers time to bootstrap before failed health checks count
towards the maximum number of retries. You can specify between 0 and 300 seconds. By default, the
startPeriod
is off.
If a health check succeeds within the startPeriod
, then the container is considered healthy
and any subsequent failures count toward the maximum number of retries.
public String toString()
toString
in class Object
Object.toString()
public HealthCheck clone()
public void marshall(ProtocolMarshaller protocolMarshaller)
StructuredPojo
ProtocolMarshaller
.marshall
in interface StructuredPojo
protocolMarshaller
- Implementation of ProtocolMarshaller
used to marshall this object's data.