TaskDefinition
The details of a task definition which describes the container and volume definitions of an Amazon Elastic Container Service task. You can specify which Docker images to use, the required resources, and other configurations related to launching the task definition through an Amazon ECS service or task.
Contents
- compatibilities
-
The task launch types the task definition validated against during task definition registration. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.
Type: Array of strings
Valid Values:
EC2 | FARGATE | EXTERNAL
Required: No
- containerDefinitions
-
A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide.
Type: Array of ContainerDefinition objects
Required: No
- cpu
-
The number of
cpu
units used by the task. If you use the EC2 launch type, this field is optional. Any value can be used. If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines your range of valid values for thememory
parameter.If you use the EC2 launch type, this field is optional. Supported values are between
128
CPU units (0.125
vCPUs) and10240
CPU units (10
vCPUs).The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.
-
256 (.25 vCPU) - Available
memory
values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) -
512 (.5 vCPU) - Available
memory
values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) -
1024 (1 vCPU) - Available
memory
values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) -
2048 (2 vCPU) - Available
memory
values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) -
4096 (4 vCPU) - Available
memory
values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) -
8192 (8 vCPU) - Available
memory
values: 16 GB and 60 GB in 4 GB incrementsThis option requires Linux platform
1.4.0
or later. -
16384 (16vCPU) - Available
memory
values: 32GB and 120 GB in 8 GB incrementsThis option requires Linux platform
1.4.0
or later.
Type: String
Required: No
-
- deregisteredAt
-
The Unix timestamp for the time when the task definition was deregistered.
Type: Timestamp
Required: No
- ephemeralStorage
-
The ephemeral storage settings to use for tasks run with the task definition.
Type: EphemeralStorage object
Required: No
- executionRoleArn
-
The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make AWS API calls on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
Type: String
Required: No
- family
-
The name of a family that this task definition is registered to. Up to 255 characters are allowed. Letters (both uppercase and lowercase letters), numbers, hyphens (-), and underscores (_) are allowed.
A family groups multiple versions of a task definition. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Amazon ECS gives sequential revision numbers to each task definition that you add.
Type: String
Required: No
- inferenceAccelerators
-
The Elastic Inference accelerator that's associated with the task.
Type: Array of InferenceAccelerator objects
Required: No
- ipcMode
-
The IPC resource namespace to use for the containers in the task. The valid values are
host
,task
, ornone
. Ifhost
is specified, then all containers within the tasks that specified thehost
IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. Iftask
is specified, all containers within the specified task share the same IPC resources. Ifnone
is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance.If the
host
IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose.If you are setting namespaced kernel parameters using
systemControls
for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide.-
For tasks that use the
host
IPC mode, IPC namespace relatedsystemControls
are not supported. -
For tasks that use the
task
IPC mode, IPC namespace relatedsystemControls
will apply to all containers within a task.
Note
This parameter is not supported for Windows containers or tasks run on AWS Fargate.
Type: String
Valid Values:
host | task | none
Required: No
-
- memory
-
The amount (in MiB) of memory used by the task.
If your tasks runs on Amazon EC2 instances, you must specify either a task-level memory value or a container-level memory value. This field is optional and any value can be used. If a task-level memory value is specified, the container-level memory value is optional. For more information regarding container-level memory and memory reservation, see ContainerDefinition.
If your tasks runs on AWS Fargate, this field is required. You must use one of the following values. The value you choose determines your range of valid values for the
cpu
parameter.-
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available
cpu
values: 256 (.25 vCPU) -
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available
cpu
values: 512 (.5 vCPU) -
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available
cpu
values: 1024 (1 vCPU) -
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available
cpu
values: 2048 (2 vCPU) -
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available
cpu
values: 4096 (4 vCPU) -
Between 16 GB and 60 GB in 4 GB increments - Available
cpu
values: 8192 (8 vCPU)This option requires Linux platform
1.4.0
or later. -
Between 32GB and 120 GB in 8 GB increments - Available
cpu
values: 16384 (16 vCPU)This option requires Linux platform
1.4.0
or later.
Type: String
Required: No
-
- networkMode
-
The Docker networking mode to use for the containers in the task. The valid values are
none
,bridge
,awsvpc
, andhost
. If no network mode is specified, the default isbridge
.For Amazon ECS tasks on Fargate, the
awsvpc
network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances,<default>
orawsvpc
can be used. If the network mode is set tonone
, you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. Thehost
andawsvpc
network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by thebridge
mode.With the
host
andawsvpc
network modes, exposed container ports are mapped directly to the corresponding host port (for thehost
network mode) or the attached elastic network interface port (for theawsvpc
network mode), so you cannot take advantage of dynamic host port mappings.Important
When using the
host
network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user.If the network mode is
awsvpc
, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.If the network mode is
host
, you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.Type: String
Valid Values:
bridge | host | awsvpc | none
Required: No
- pidMode
-
The process namespace to use for the containers in the task. The valid values are
host
ortask
. On Fargate for Linux containers, the only valid value istask
. For example, monitoring sidecars might needpidMode
to access information about other containers running in the same task.If
host
is specified, all containers within the tasks that specified thehost
PID mode on the same container instance share the same process namespace with the host Amazon EC2 instance.If
task
is specified, all containers within the specified task share the same process namespace.If no value is specified, the default is a private namespace for each container.
If the
host
PID mode is used, there's a heightened risk of undesired process namespace exposure.Note
This parameter is not supported for Windows containers.
Note
This parameter is only supported for tasks that are hosted on AWS Fargate if the tasks are using platform version
1.4.0
or later (Linux). This isn't supported for Windows containers on Fargate.Type: String
Valid Values:
host | task
Required: No
- placementConstraints
-
An array of placement constraint objects to use for tasks.
Note
This parameter isn't supported for tasks run on AWS Fargate.
Type: Array of TaskDefinitionPlacementConstraint objects
Required: No
- proxyConfiguration
-
The configuration details for the App Mesh proxy.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent and at least version 1.26.0-1 of the
ecs-init
package to use a proxy configuration. If your container instances are launched from the Amazon ECS optimized AMI version20190301
or later, they contain the required versions of the container agent andecs-init
. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide.Type: ProxyConfiguration object
Required: No
- registeredAt
-
The Unix timestamp for the time when the task definition was registered.
Type: Timestamp
Required: No
- registeredBy
-
The principal that registered the task definition.
Type: String
Required: No
- requiresAttributes
-
The container instance attributes required by your task. When an Amazon EC2 instance is registered to your cluster, the Amazon ECS container agent assigns some standard attributes to the instance. You can apply custom attributes. These are specified as key-value pairs using the Amazon ECS console or the PutAttributes API. These attributes are used when determining task placement for tasks hosted on Amazon EC2 instances. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
Note
This parameter isn't supported for tasks run on AWS Fargate.
Type: Array of Attribute objects
Required: No
- requiresCompatibilities
-
The task launch types the task definition was validated against. The valid values are
EC2
,FARGATE
, andEXTERNAL
. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.Type: Array of strings
Valid Values:
EC2 | FARGATE | EXTERNAL
Required: No
- revision
-
The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is
1
. Each time that you register a new revision of a task definition in the same family, the revision value always increases by one. This is even if you deregistered previous revisions in this family.Type: Integer
Required: No
- runtimePlatform
-
The operating system that your task definitions are running on. A platform family is specified only for tasks using the Fargate launch type.
When you specify a task in a service, this value must match the
runtimePlatform
value of the service.Type: RuntimePlatform object
Required: No
- status
-
The status of the task definition.
Type: String
Valid Values:
ACTIVE | INACTIVE | DELETE_IN_PROGRESS
Required: No
- taskDefinitionArn
-
The full Amazon Resource Name (ARN) of the task definition.
Type: String
Required: No
- taskRoleArn
-
The short name or full Amazon Resource Name (ARN) of the AWS Identity and Access Management role that grants containers in the task permission to call AWS APIs on your behalf. For informationabout the required IAM roles for Amazon ECS, see IAM roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
Type: String
Required: No
- volumes
-
The list of data volume definitions for the task. For more information, see Using data volumes in tasks in the Amazon Elastic Container Service Developer Guide.
Note
The
host
andsourcePath
parameters aren't supported for tasks run on AWS Fargate.Type: Array of Volume objects
Required: No
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following: