Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . ses ]

send-email

Description

Composes an email message and immediately queues it for sending. To send email using this operation, your message must meet the following requirements:

  • The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation results in an "Email address not verified" error.
  • If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
  • The maximum message size is 10 MB.
  • The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain ), the entire message is rejected, even if the message contains other recipients that are valid.
  • The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.

Warning

For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota ). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.

See also: AWS API Documentation

Synopsis

  send-email
[--destination <value>]
[--message <value>]
[--reply-to-addresses <value>]
[--return-path <value>]
[--source-arn <value>]
[--return-path-arn <value>]
[--tags <value>]
[--configuration-set-name <value>]
--from <value>
[--to <value>]
[--cc <value>]
[--bcc <value>]
[--subject <value>]
[--text <value>]
[--html <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options

--destination (structure)

The destination for this email, composed of To:, CC:, and BCC: fields.

ToAddresses -> (list)

The recipients to place on the To: line of the message.

(string)

CcAddresses -> (list)

The recipients to place on the CC: line of the message.

(string)

BccAddresses -> (list)

The recipients to place on the BCC: line of the message.

(string)

Shorthand Syntax:

ToAddresses=string,string,CcAddresses=string,string,BccAddresses=string,string

JSON Syntax:

{
  "ToAddresses": ["string", ...],
  "CcAddresses": ["string", ...],
  "BccAddresses": ["string", ...]
}

--message (structure)

The message to be sent.

Subject -> (structure)

The subject of the message: A short summary of the content, which appears in the recipient's inbox.

Data -> (string)

The textual data of the content.

Charset -> (string)

The character set of the content.

Body -> (structure)

The message body.

Text -> (structure)

The content of the message, in text format. Use this for text-based email clients, or clients on high-latency networks (such as mobile devices).

Data -> (string)

The textual data of the content.

Charset -> (string)

The character set of the content.

Html -> (structure)

The content of the message, in HTML format. Use this for email clients that can process HTML. You can include clickable links, formatted text, and much more in an HTML message.

Data -> (string)

The textual data of the content.

Charset -> (string)

The character set of the content.

Shorthand Syntax:

Subject={Data=string,Charset=string},Body={Text={Data=string,Charset=string},Html={Data=string,Charset=string}}

JSON Syntax:

{
  "Subject": {
    "Data": "string",
    "Charset": "string"
  },
  "Body": {
    "Text": {
      "Data": "string",
      "Charset": "string"
    },
    "Html": {
      "Data": "string",
      "Charset": "string"
    }
  }
}

--reply-to-addresses (list)

The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.

(string)

Syntax:

"string" "string" ...

--return-path (string)

The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

--source-arn (string)

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com ) attaches a policy to it that authorizes you to send from user@example.com , then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com , and the Source to be user@example.com .

For more information about sending authorization, see the Amazon SES Developer Guide .

--return-path-arn (string)

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com ) attaches a policy to it that authorizes you to use feedback@example.com , then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com , and the ReturnPath to be feedback@example.com .

For more information about sending authorization, see the Amazon SES Developer Guide .

--tags (list)

A list of tags, in the form of name/value pairs, to apply to an email that you send using SendEmail . Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

(structure)

Contains the name and value of a tag that you can provide to SendEmail or SendRawEmail to apply to an email.

Message tags, which you use with configuration sets, enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide .

Name -> (string)

The name of the tag. The name must meet the following requirements:

  • Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
  • Contain 256 characters or fewer.

Value -> (string)

The value of the tag. The value must meet the following requirements:

  • Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
  • Contain 256 characters or fewer.

Shorthand Syntax:

Name=string,Value=string ...

JSON Syntax:

[
  {
    "Name": "string",
    "Value": "string"
  }
  ...
]

--configuration-set-name (string)

The name of the configuration set to use when you send an email using SendEmail .

--from (string)

The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide .

If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide .

Note

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531 . For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API . For more information about Punycode, see RFC 3492 .

--to (string) The email addresses of the primary recipients. You can specify multiple recipients as space-separated values

--cc (string) The email addresses of copy recipients (Cc). You can specify multiple recipients as space-separated values

--bcc (string) The email addresses of blind-carbon-copy recipients (Bcc). You can specify multiple recipients as space-separated values

--subject (string) The subject of the message

--text (string) The raw text body of the message

--html (string) The HTML body of the message

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json
  • text
  • table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on
  • off
  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal's quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To send a formatted email using Amazon SES

The following example uses the send-email command to send a formatted email:

aws ses send-email --from sender@example.com --destination file://destination.json --message file://message.json

Output:

{
   "MessageId": "EXAMPLEf3a5efcd1-51adec81-d2a4-4e3f-9fe2-5d85c1b23783-000000"
}

The destination and the message are JSON data structures saved in .json files in the current directory. These files are as follows:

destination.json:

{
  "ToAddresses":  ["recipient1@example.com", "recipient2@example.com"],
  "CcAddresses":  ["recipient3@example.com"],
  "BccAddresses": []
}

message.json:

{
   "Subject": {
       "Data": "Test email sent using the AWS CLI",
       "Charset": "UTF-8"
   },
   "Body": {
       "Text": {
           "Data": "This is the message body in text format.",
           "Charset": "UTF-8"
       },
       "Html": {
           "Data": "This message body contains HTML formatting. It can, for example, contain links like this one: <a class=\"ulink\" href=\"http://docs.aws.amazon.com/ses/latest/DeveloperGuide\" target=\"_blank\">Amazon SES Developer Guide</a>.",
           "Charset": "UTF-8"
       }
   }
}

Replace the sender and recipient email addresses with the ones you want to use. Note that the sender's email address must be verified with Amazon SES. Until you are granted production access to Amazon SES, you must also verify the email address of each recipient unless the recipient is the Amazon SES mailbox simulator. For more information on verification, see Verifying Email Addresses and Domains in Amazon SES in the Amazon Simple Email Service Developer Guide.

The Message ID in the output indicates that the call to send-email was successful.

If you don't receive the email, check your Junk box.

For more information on sending formatted email, see Sending Formatted Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide.

Output

MessageId -> (string)

The unique message identifier returned from the SendEmail action.