AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Simple Queue Service (SQS) CreateQueue API operation.

Syntax

New-SQSQueue
-QueueName <String>
-Attribute <Hashtable>
-Tag <Hashtable>
-Select <String>
-PassThru <SwitchParameter>
-Force <SwitchParameter>
-ClientConfig <AmazonSQSConfig>

Description

Creates a new standard or FIFO queue. You can pass one or more attributes in the request. Keep the following in mind:
  • If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue. You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
  • If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
  • If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues. After you create a queue, you must wait at least one second after the queue is created to be able to use the queue. To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:
  • If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
  • If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.

Parameters

-Attribute <Hashtable>
A map of attributes with their corresponding values.The following lists the names, descriptions, and values of the special request parameters that the CreateQueue action uses:
  • DelaySeconds – The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 seconds (15 minutes). Default: 0.
  • MaximumMessageSize – The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) to 262,144 bytes (256 KiB). Default: 262,144 (256 KiB).
  • MessageRetentionPeriod – The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer from 60 seconds (1 minute) to 1,209,600 seconds (14 days). Default: 345,600 (4 days). When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the MessageRetentionPeriod is reduced below the age of existing messages.
  • Policy – The queue's policy. A valid Amazon Web Services policy. For more information about policy structure, see Overview of Amazon Web Services IAM Policies in the IAM User Guide.
  • ReceiveMessageWaitTimeSeconds – The length of time, in seconds, for which a ReceiveMessage action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.
  • VisibilityTimeout – The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.
The following attributes apply only to dead-letter queues:
  • RedrivePolicy – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:
    • deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
    • maxReceiveCount – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the ReceiveCount for a message exceeds the maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
  • RedriveAllowPolicy – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:
    • redrivePermission – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:
      • allowAll – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.
      • denyAll – No source queues can specify this queue as the dead-letter queue.
      • byQueue – Only queues specified by the sourceQueueArns parameter can specify this queue as the dead-letter queue.
    • sourceQueueArns – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the redrivePermission parameter is set to byQueue. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the redrivePermission parameter to allowAll.
The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.The following attributes apply only to server-side-encryption:
  • KmsMasterKeyId – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms. While the alias of the Amazon Web Services managed CMK for Amazon SQS is always alias/aws/sqs, the alias of a custom CMK can, for example, be alias/MyAlias. For more examples, see KeyId in the Key Management Service API Reference.
  • KmsDataKeyReusePeriodSeconds – The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see How Does the Data Key Reuse Period Work?
  • SqsManagedSseEnabled – Enables server-side queue encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, SSE-KMS or SSE-SQS).
The following attributes apply only to FIFO (first-in-first-out) queues:
  • FifoQueue – Designates a queue as FIFO. Valid values are true and false. If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue. You can provide this attribute only during queue creation. You can't change it for an existing queue. When you set this attribute, you must also provide the MessageGroupId for your messages explicitly.For more information, see FIFO queue logic in the Amazon SQS Developer Guide.
  • ContentBasedDeduplication – Enables content-based deduplication. Valid values are true and false. For more information, see Exactly-once processing in the Amazon SQS Developer Guide. Note the following:
    • Every message must have a unique MessageDeduplicationId.
      • You may provide a MessageDeduplicationId explicitly.
      • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).
      • If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.
      • If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.
    • When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
    • If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.
The following attributes apply only to high throughput for FIFO queues:
  • DeduplicationScope – Specifies whether message deduplication occurs at the message group or queue level. Valid values are messageGroup and queue.
  • FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are perQueue and perMessageGroupId. The perMessageGroupId value is allowed only when the value for DeduplicationScope is messageGroup.
To enable high throughput for FIFO queues, do the following:
  • Set DeduplicationScope to messageGroup.
  • Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.For information on throughput quotas, see Quotas related to messages in the Amazon SQS Developer Guide.
Required?False
Position?2
Accept pipeline input?True (ByPropertyName)
AliasesAttributes
-ClientConfig <AmazonSQSConfig>
Amazon.PowerShell.Cmdlets.SQS.AmazonSQSClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the QueueName parameter. The -PassThru parameter is deprecated, use -Select '^QueueName' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-QueueName <String>
The name of the new queue. The following limits apply to this name:
  • A queue name can have up to 80 characters.
  • Valid values: alphanumeric characters, hyphens (-), and underscores (_).
  • A FIFO queue name must end with the .fifo suffix.
Queue URLs and names are case-sensitive.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'QueueUrl'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.CreateQueueResponse). Specifying the name of a property of type Amazon.SQS.Model.CreateQueueResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Tag <Hashtable>
Add cost allocation tags to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.When you use queue tags, keep the following guidelines in mind:
  • Adding more than 50 tags to a queue isn't recommended.
  • Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
  • Tags are case-sensitive.
  • A new tag with a key identical to that of an existing tag overwrites the existing tag.
For a full list of tag restrictions, see Quotas related to queues in the Amazon SQS Developer Guide.To be able to tag a queue on creation, you must have the sqs:CreateQueue and sqs:TagQueue permissions.Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesTags

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

System.String or Amazon.SQS.Model.CreateQueueResponse
This cmdlet returns a System.String object. The service call response (type Amazon.SQS.Model.CreateQueueResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.

Examples

Example 1

New-SQSQueue -QueueName MyQueue

https://sqs.us-east-1.amazonaws.com/80398EXAMPLE/MyQueue
This example creates a queue with the specified name.
Getting Started Guide
Developer Guide
Service API Reference
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z