AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Elastic Container Service for Kubernetes UpdateClusterConfig API operation.

Syntax

Update-EKSClusterConfig
-Name <String>
-AccessConfig_AuthenticationMode <AuthenticationMode>
-ClientRequestToken <String>
-Logging_ClusterLogging <LogSetup[]>
-DeletionProtection <Boolean>
-ComputeConfig_Enabled <Boolean>
-ElasticLoadBalancing_Enabled <Boolean>
-BlockStorage_Enabled <Boolean>
-ZonalShiftConfig_Enabled <Boolean>
-KubernetesNetworkConfig_IpFamily <IpFamily>
-ComputeConfig_NodePool <String[]>
-ComputeConfig_NodeRoleArn <String>
-RemoteNetworkConfig_RemoteNodeNetwork <RemoteNodeNetwork[]>
-RemoteNetworkConfig_RemotePodNetwork <RemotePodNetwork[]>
-ResourcesVpcConfig <VpcConfigRequest>
-KubernetesNetworkConfig_ServiceIpv4Cidr <String>
-UpgradePolicy_SupportType <SupportType>
-Select <String>
-PassThru <SwitchParameter>
-Force <SwitchParameter>
-ClientConfig <AmazonEKSConfig>

Description

Updates an Amazon EKS cluster configuration. Your cluster continues to function during the update. The response output includes an update ID that you can use to track the status of your cluster update with DescribeUpdate. You can use this operation to do the following actions:
  • You can use this API operation to enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs aren't exported to CloudWatch Logs. For more information, see Amazon EKS Cluster control plane logs in the Amazon EKS User Guide. CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see CloudWatch Pricing.
  • You can also use this API operation to enable or disable public and private access to your cluster's Kubernetes API server endpoint. By default, public access is enabled, and private access is disabled. For more information, see Cluster API server endpoint in the Amazon EKS User Guide.
  • You can also use this API operation to choose different subnets and security groups for the cluster. You must specify at least two subnets that are in different Availability Zones. You can't change which VPC the subnets are from, the subnets must be in the same VPC as the subnets that the cluster was created with. For more information about the VPC requirements, see https://docs.aws.amazon.com/eks/latest/userguide/network_reqs.html in the Amazon EKS User Guide.
  • You can also use this API operation to enable or disable ARC zonal shift. If zonal shift is enabled, Amazon Web Services configures zonal autoshift for the cluster.
  • You can also use this API operation to add, change, or remove the configuration in the cluster for EKS Hybrid Nodes. To remove the configuration, use the remoteNetworkConfig key with an object containing both subkeys with empty arrays for each. Here is an inline example: "remoteNetworkConfig": { "remoteNodeNetworks": [], "remotePodNetworks": [] }.
Cluster updates are asynchronous, and they should finish within a few minutes. During an update, the cluster status moves to UPDATING (this status transition is eventually consistent). When the update is complete (either Failed or Successful), the cluster status moves to Active.

Parameters

-AccessConfig_AuthenticationMode <AuthenticationMode>
The desired authentication mode for the cluster.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-BlockStorage_Enabled <Boolean>
Indicates if the block storage capability is enabled on your EKS Auto Mode cluster. If the block storage capability is enabled, EKS Auto Mode will create and delete EBS volumes in your Amazon Web Services account.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStorageConfig_BlockStorage_Enabled
-ClientConfig <AmazonEKSConfig>
Amazon.PowerShell.Cmdlets.EKS.AmazonEKSClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ClientRequestToken <String>
A unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ComputeConfig_Enabled <Boolean>
Request to enable or disable the compute capability on your EKS Auto Mode cluster. If the compute capability is enabled, EKS Auto Mode will create and delete EC2 Managed Instances in your Amazon Web Services account.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ComputeConfig_NodePool <String[]>
Configuration for node pools that defines the compute resources for your EKS Auto Mode cluster. For more information, see EKS Auto Mode Node Pools in the Amazon EKS User Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesComputeConfig_NodePools
-ComputeConfig_NodeRoleArn <String>
The ARN of the IAM Role EKS will assign to EC2 Managed Instances in your EKS Auto Mode cluster. This value cannot be changed after the compute capability of EKS Auto Mode is enabled. For more information, see the IAM Reference in the Amazon EKS User Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DeletionProtection <Boolean>
Specifies whether to enable or disable deletion protection for the cluster. When enabled (true), the cluster cannot be deleted until deletion protection is explicitly disabled. When disabled (false), the cluster can be deleted normally.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ElasticLoadBalancing_Enabled <Boolean>
Indicates if the load balancing capability is enabled on your EKS Auto Mode cluster. If the load balancing capability is enabled, EKS Auto Mode will create and delete load balancers in your Amazon Web Services account.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesKubernetesNetworkConfig_ElasticLoadBalancing_Enabled
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-KubernetesNetworkConfig_IpFamily <IpFamily>
Specify which IP family is used to assign Kubernetes pod and service IP addresses. If you don't specify a value, ipv4 is used by default. You can only specify an IP family when you create a cluster and can't change this value once the cluster is created. If you specify ipv6, the VPC and subnets that you specify for cluster creation must have both IPv4 and IPv6 CIDR blocks assigned to them. You can't specify ipv6 for clusters in China Regions.You can only specify ipv6 for 1.21 and later clusters that use version 1.10.1 or later of the Amazon VPC CNI add-on. If you specify ipv6, then ensure that your VPC meets the requirements listed in the considerations listed in Assigning IPv6 addresses to pods and services in the Amazon EKS User Guide. Kubernetes assigns services IPv6 addresses from the unique local address range (fc00::/7). You can't specify a custom IPv6 CIDR block. Pod addresses are assigned from the subnet's IPv6 CIDR.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-KubernetesNetworkConfig_ServiceIpv4Cidr <String>
Don't specify a value if you select ipv6 for ipFamily. The CIDR block to assign Kubernetes service IP addresses from. If you don't specify a block, Kubernetes assigns addresses from either the 10.100.0.0/16 or 172.20.0.0/16 CIDR blocks. We recommend that you specify a block that does not overlap with resources in other networks that are peered or connected to your VPC. The block must meet the following requirements:
  • Within one of the following private IP address blocks: 10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16.
  • Doesn't overlap with any CIDR block assigned to the VPC that you selected for VPC.
  • Between /24 and /12.
You can only specify a custom CIDR block when you create a cluster. You can't change this value after the cluster is created.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Logging_ClusterLogging <LogSetup[]>
The cluster control plane logging configuration for your cluster.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Name <String>
The name of the Amazon EKS cluster to update.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-RemoteNetworkConfig_RemoteNodeNetwork <RemoteNodeNetwork[]>
The list of network CIDRs that can contain hybrid nodes.These CIDR blocks define the expected IP address range of the hybrid nodes that join the cluster. These blocks are typically determined by your network administrator.Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, 10.2.0.0/16).It must satisfy the following requirements:
  • Each block must be within an IPv4 RFC-1918 network range. Minimum allowed size is /32, maximum allowed size is /8. Publicly-routable addresses aren't supported.
  • Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
  • Each block must have a route to the VPC that uses the VPC CIDR blocks, not public IPs or Elastic IPs. There are many options including Transit Gateway, Site-to-Site VPN, or Direct Connect.
  • Each host must allow outbound connection to the EKS cluster control plane on TCP ports 443 and 10250.
  • Each host must allow inbound connection from the EKS cluster control plane on TCP port 10250 for logs, exec and port-forward operations.
  • Each host must allow TCP and UDP network connectivity to and from other hosts that are running CoreDNS on UDP port 53 for service and pod DNS names.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRemoteNetworkConfig_RemoteNodeNetworks
-RemoteNetworkConfig_RemotePodNetwork <RemotePodNetwork[]>
The list of network CIDRs that can contain pods that run Kubernetes webhooks on hybrid nodes.These CIDR blocks are determined by configuring your Container Network Interface (CNI) plugin. We recommend the Calico CNI or Cilium CNI. Note that the Amazon VPC CNI plugin for Kubernetes isn't available for on-premises and edge locations.Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, 10.2.0.0/16).It must satisfy the following requirements:
  • Each block must be within an IPv4 RFC-1918 network range. Minimum allowed size is /32, maximum allowed size is /8. Publicly-routable addresses aren't supported.
  • Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRemoteNetworkConfig_RemotePodNetworks
-ResourcesVpcConfig <VpcConfigRequest>
The service has not provided documentation for this parameter; please refer to the service's API reference documentation for the latest available information.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'Update'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EKS.Model.UpdateClusterConfigResponse). Specifying the name of a property of type Amazon.EKS.Model.UpdateClusterConfigResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-UpgradePolicy_SupportType <SupportType>
If the cluster is set to EXTENDED, it will enter extended support at the end of standard support. If the cluster is set to STANDARD, it will be automatically upgraded at the end of standard support.Learn more about EKS Extended Support in the Amazon EKS User Guide.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ZonalShiftConfig_Enabled <Boolean>
If zonal shift is enabled, Amazon Web Services configures zonal autoshift for the cluster.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.EKS.Model.Update or Amazon.EKS.Model.UpdateClusterConfigResponse
This cmdlet returns an Amazon.EKS.Model.Update object. The service call response (type Amazon.EKS.Model.UpdateClusterConfigResponse) can be returned by specifying '-Select *'.

Examples

Example 1

Update-EKSClusterConfig -Name "PROD" -Logging_ClusterLogging @{Types="api","audit","authenticator","controllerManager","scheduler",Enabled="True"}

CreatedAt : 12/25/2019 5:03:07 PM
Errors    : {}
Id        : ee708232-7d2e-4ed7-9270-d0b5176f0726
Params    : {Amazon.EKS.Model.UpdateParam}
Status    : InProgress
Type      : LoggingUpdate
Updates an Amazon EKS cluster configuration. Your cluster continues to function during the update.
User Guide
Service API Reference
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z