ModifyDBClusterRequest

Gets and sets the property AllocatedStorage.

The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.

Valid for Cluster Type: Multi-AZ DB clusters only

Gets and sets the property AllowEngineModeChange.

Specifies whether engine mode changes from serverless to provisioned are allowed.

Valid for Cluster Type: Aurora Serverless v1 DB clusters only

Constraints:

• You must allow engine mode changes when specifying a different value for the EngineMode parameter from the DB cluster's current engine mode.

Gets and sets the property AllowMajorVersionUpgrade.

Specifies whether major version upgrades are allowed.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

• You must allow major version upgrades when specifying a value for the EngineVersion parameter that is a different major version than the DB cluster's current version.

Gets and sets the property ApplyImmediately.

Specifies whether the modifications in this request and any pending modifications are asynchronously applied as soon as possible, regardless of the PreferredMaintenanceWindow setting for the DB cluster. If this parameter is disabled, changes to the DB cluster are applied during the next maintenance window.

Most modifications can be applied immediately or during the next scheduled maintenance window. Some modifications, such as turning on deletion protection and changing the master password, are applied immediately—regardless of when you choose to apply them.

By default, this parameter is disabled.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Gets and sets the property AutoMinorVersionUpgrade.

Specifies whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window. By default, minor engine upgrades are applied automatically.

Valid for Cluster Type: Multi-AZ DB clusters only

Gets and sets the property AwsBackupRecoveryPointArn.

The Amazon Resource Name (ARN) of the recovery point in Amazon Web Services Backup.

Gets and sets the property BacktrackWindow.

The target backtrack window, in seconds. To disable backtracking, set this value to 0.

Valid for Cluster Type: Aurora MySQL DB clusters only

Default: 0

Constraints:

• If specified, this value must be set to a number from 0 to 259,200 (72 hours).

Gets and sets the property BackupRetentionPeriod.

The number of days for which automated backups are retained. Specify a minimum value of 1.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Default: 1

Constraints:

• Must be a value from 1 to 35.

Gets and sets the property CACertificateIdentifier.

The CA certificate identifier to use for the DB cluster's server certificate.

For more information, see Using SSL/TLS to encrypt a connection to a DB instance in the Amazon RDS User Guide.

Valid for Cluster Type: Multi-AZ DB clusters

Gets and sets the property CloudwatchLogsExportConfiguration.

The configuration setting for the log types to be enabled for export to CloudWatch Logs for a specific DB cluster.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

The following values are valid for each DB engine:

• Aurora MySQL - audit | error | general | slowquery

• Aurora PostgreSQL - postgresql

• RDS for MySQL - error | general | slowquery

• RDS for PostgreSQL - postgresql | upgrade

For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.

Gets and sets the property CopyTagsToSnapshot.

Specifies whether to copy all tags from the DB cluster to snapshots of the DB cluster. The default is not to copy them.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Gets and sets the property DBClusterIdentifier.

The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

• Must match the identifier of an existing DB cluster.

Gets and sets the property DBClusterInstanceClass.

The compute and memory capacity of each DB instance in the Multi-AZ DB cluster, for example db.m6gd.xlarge. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines.

For the full list of DB instance classes and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.

Valid for Cluster Type: Multi-AZ DB clusters only

Gets and sets the property DBClusterParameterGroupName.

The name of the DB cluster parameter group to use for the DB cluster.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Gets and sets the property DBInstanceParameterGroupName.

The name of the DB parameter group to apply to all instances of the DB cluster.

Valid for Cluster Type: Aurora DB clusters only

Default: The existing name setting

Constraints:

• The DB parameter group must be in the same DB parameter group family as this DB cluster.

• The DBInstanceParameterGroupName parameter is valid in combination with the AllowMajorVersionUpgrade parameter for a major version upgrade only.

Gets and sets the property DeletionProtection.

Specifies whether the DB cluster has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Gets and sets the property Domain.

The Active Directory directory ID to move the DB cluster to. Specify none to remove the cluster from its current domain. The domain must be created prior to this operation.

For more information, see Kerberos Authentication in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters only

Gets and sets the property DomainIAMRoleName.

The name of the IAM role to use when making API calls to the Directory Service.

Valid for Cluster Type: Aurora DB clusters only

Gets and sets the property EnableGlobalWriteForwarding.

Specifies whether to enable this DB cluster to forward write operations to the primary cluster of a global cluster (Aurora global database). By default, write operations are not allowed on Aurora DB clusters that are secondary clusters in an Aurora global database.

You can set this value only on Aurora DB clusters that are members of an Aurora global database. With this parameter enabled, a secondary cluster can forward writes to the current primary cluster, and the resulting changes are replicated back to this cluster. For the primary DB cluster of an Aurora global database, this value is used immediately if the primary is demoted by a global cluster API operation, but it does nothing until then.

Valid for Cluster Type: Aurora DB clusters only

Gets and sets the property EnableHttpEndpoint.

Specifies whether to enable the HTTP endpoint for an Aurora Serverless v1 DB cluster. By default, the HTTP endpoint isn't enabled.

When enabled, the HTTP endpoint provides a connectionless web service API (RDS Data API) for running SQL queries on the Aurora Serverless v1 DB cluster. You can also query your database from inside the RDS console with the RDS query editor.

For more information, see Using RDS Data API in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters only

Gets and sets the property EnableIAMDatabaseAuthentication.

Specifies whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.

For more information, see IAM Database Authentication in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters only

Gets and sets the property EnableLimitlessDatabase.

Specifies whether to enable Aurora Limitless Database. You must enable Aurora Limitless Database to create a DB shard group.

Valid for: Aurora DB clusters only

Gets and sets the property EnableLocalWriteForwarding.

Specifies whether read replicas can forward write operations to the writer DB instance in the DB cluster. By default, write operations aren't allowed on reader DB instances.

Valid for: Aurora DB clusters only

Gets and sets the property EnablePerformanceInsights.

Specifies whether to turn on Performance Insights for the DB cluster.

For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.

Valid for Cluster Type: Multi-AZ DB clusters only

Gets and sets the property EngineMode.

The DB engine mode of the DB cluster, either provisioned or serverless.

For more information, see CreateDBCluster.

Valid for Cluster Type: Aurora DB clusters only

Gets and sets the property EngineVersion.

The version number of the database engine to which you want to upgrade. Changing this parameter results in an outage. The change is applied during the next maintenance window unless ApplyImmediately is enabled.

If the cluster that you're modifying has one or more read replicas, all replicas must be running an engine version that's the same or later than the version you specify.

To list all of the available engine versions for Aurora MySQL, use the following command:

aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for Aurora PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine aurora-postgresql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for MySQL, use the following command:

aws rds describe-db-engine-versions --engine mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine postgres --query "DBEngineVersions[].EngineVersion"

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Gets and sets the property Iops.

The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.

For information about valid IOPS values, see Amazon RDS Provisioned IOPS storage in the Amazon RDS User Guide.

Valid for Cluster Type: Multi-AZ DB clusters only

Constraints:

• Must be a multiple between .5 and 50 of the storage amount for the DB cluster.

Gets and sets the property ManageMasterUserPassword.

Specifies whether to manage the master user password with Amazon Web Services Secrets Manager.

If the DB cluster doesn't manage the master user password with Amazon Web Services Secrets Manager, you can turn on this management. In this case, you can't specify MasterUserPassword.

If the DB cluster already manages the master user password with Amazon Web Services Secrets Manager, and you specify that the master user password is not managed with Amazon Web Services Secrets Manager, then you must specify MasterUserPassword. In this case, RDS deletes the secret and uses the new password for the master user specified by MasterUserPassword.

For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Gets and sets the property MasterUserPassword.

The new password for the master database user.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

• Must contain from 8 to 41 characters.

• Can contain any printable ASCII character except "/", """, or "@".

• Can't be specified if ManageMasterUserPassword is turned on.

Gets and sets the property MasterUserSecretKmsKeyId.

The Amazon Web Services KMS key identifier to encrypt a secret that is automatically generated and managed in Amazon Web Services Secrets Manager.

This setting is valid only if both of the following conditions are met:

• The DB cluster doesn't manage the master user password in Amazon Web Services Secrets Manager.

  If the DB cluster already manages the master user password in Amazon Web Services Secrets Manager, you can't change the KMS key that is used to encrypt the secret.

• You are turning on ManageMasterUserPassword to manage the master user password in Amazon Web Services Secrets Manager.

  If you are turning on ManageMasterUserPassword and don't specify MasterUserSecretKmsKeyId, then the aws/secretsmanager KMS key is used to encrypt the secret. If the secret is in a different Amazon Web Services account, then you can't use the aws/secretsmanager KMS key to encrypt the secret, and you must use a customer managed KMS key.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.

There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Gets and sets the property MonitoringInterval.

The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify 0.

If MonitoringRoleArn is specified, also set MonitoringInterval to a value other than 0.

Valid for Cluster Type: Multi-AZ DB clusters only

Valid Values: 0 | 1 | 5 | 10 | 15 | 30 | 60

Default: 0

Gets and sets the property MonitoringRoleArn.

The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs. An example is arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, see To create an IAM role for Amazon RDS Enhanced Monitoring in the Amazon RDS User Guide.

If MonitoringInterval is set to a value other than 0, supply a MonitoringRoleArn value.

Valid for Cluster Type: Multi-AZ DB clusters only

Gets and sets the property NetworkType.

The network type of the DB cluster.

The network type is determined by the DBSubnetGroup specified for the DB cluster. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (DUAL).

For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters only

Valid Values: IPV4 | DUAL

Gets and sets the property NewDBClusterIdentifier.

The new DB cluster identifier for the DB cluster when renaming a DB cluster. This value is stored as a lowercase string.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

• Must contain from 1 to 63 letters, numbers, or hyphens.

• The first character must be a letter.

• Can't end with a hyphen or contain two consecutive hyphens.

Example: my-cluster2

Gets and sets the property OptionGroupName.

The option group to associate the DB cluster with.

DB clusters are associated with a default option group that can't be modified.

Gets and sets the property PerformanceInsightsKMSKeyId.

The Amazon Web Services KMS key identifier for encryption of Performance Insights data.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.

If you don't specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

Valid for Cluster Type: Multi-AZ DB clusters only

Gets and sets the property PerformanceInsightsRetentionPeriod.

The number of days to retain Performance Insights data.

Valid for Cluster Type: Multi-AZ DB clusters only

Valid Values:

• 7

• month * 31, where month is a number of months from 1-23. Examples: 93 (3 months * 31), 341 (11 months * 31), 589 (19 months * 31)

• 731

Default: 7 days

If you specify a retention period that isn't valid, such as 94, Amazon RDS issues an error.

Gets and sets the property Port.

The port number on which the DB cluster accepts connections.

Valid for Cluster Type: Aurora DB clusters only

Valid Values: 1150-65535

Default: The same port as the original DB cluster.

Gets and sets the property PreferredBackupWindow.

The daily time range during which automated backups are created if automated backups are enabled, using the BackupRetentionPeriod parameter.

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region. To view the time blocks available, see Backup window in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

• Must be in the format hh24:mi-hh24:mi.

• Must be in Universal Coordinated Time (UTC).

• Must not conflict with the preferred maintenance window.

• Must be at least 30 minutes.

Gets and sets the property PreferredMaintenanceWindow.

The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred DB Cluster Maintenance Window in the Amazon Aurora User Guide.

Constraints:

• Must be in the format ddd:hh24:mi-ddd:hh24:mi.

• Days must be one of Mon | Tue | Wed | Thu | Fri | Sat | Sun.

• Must be in Universal Coordinated Time (UTC).

• Must be at least 30 minutes.

Gets and sets the property RotateMasterUserPassword.

Specifies whether to rotate the secret managed by Amazon Web Services Secrets Manager for the master user password.

This setting is valid only if the master user password is managed by RDS in Amazon Web Services Secrets Manager for the DB cluster. The secret value contains the updated password.

For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

• You must apply the change immediately when rotating the master user password.

Gets and sets the property ScalingConfiguration.

The scaling properties of the DB cluster. You can only modify scaling properties for DB clusters in serverless DB engine mode.

Valid for Cluster Type: Aurora DB clusters only

Gets and sets the property ServerlessV2ScalingConfiguration.

Gets and sets the property StorageType.

The storage type to associate with the DB cluster.

For information on storage types for Aurora DB clusters, see Storage configurations for Amazon Aurora DB clusters. For information on storage types for Multi-AZ DB clusters, see Settings for creating Multi-AZ DB clusters.

When specified for a Multi-AZ DB cluster, a value for the Iops parameter is required.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Valid Values:

• Aurora DB clusters - aurora | aurora-iopt1

• Multi-AZ DB clusters - io1 | io2 | gp3

Default:

• Aurora DB clusters - aurora

• Multi-AZ DB clusters - io1

Gets and sets the property VpcSecurityGroupIds.

A list of EC2 VPC security groups to associate with this DB cluster.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters