AmazonSQSBufferedAsyncClient (AWS SDK for Java

java.lang.Object
- com.amazonaws.services.sqs.buffered.AmazonSQSBufferedAsyncClient

All Implemented Interfaces:

AmazonSQS, AmazonSQSAsync
```
public class AmazonSQSBufferedAsyncClient
extends Object
implements AmazonSQSAsync
```
AmazonSQSBufferedAsyncClient provides client-side batching of outgoing sendMessage, deleteMessage and changeMessageVisibility calls.
After receiving a call, rather than executing it right away, this client waits for a configurable period of time ( default=200ms) for other calls of the same type to come in; if such calls do come in, they are also not executed immediately, but instead are added to the batch. When the batch becomes full or the timeout period expires, the entire batch is executed at once and the results are returned to the callers. This method of operation leads to reduced operating costs (since SQS charges per call and fewer calls are made) and increased overall throughput (since more work is performed per call, and all fixed costs of making a call are amortized over a greater amount of work). The cost of this method is increased latency for individual calls, since calls spend some time waiting on the client side for the potential batch-mates to appear before they are actually executed.
This client also performs pre-fetching of messages from SQS. After the first receiveMessage call is made, the client attempts not only to satisfy that call, but also pre-fetch extra messages to store in a temporary buffer. Future receiveMessage calls will be satisfied from the buffer, and only if the buffer is empty will the calling thread have to wait for the messages to be fetched. The size of the buffer and the maximum number of threads used for prefetching are configurable.
AmazonSQSBufferedAsyncClient is thread-safe.

Field Summary

Fields
Modifier and Type Field and Description

static String USER_AGENT
- Fields inherited from interface com.amazonaws.services.sqs.AmazonSQS
  ENDPOINT_PREFIX

Fields
Modifier and Type	Field and Description
`static String`	`USER_AGENT`

Constructor Summary

Constructors
Constructor and Description
`AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS)`
`AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS, QueueBufferConfig config)`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`AddPermissionResult`	`addPermission(AddPermissionRequest addPermissionRequest)` Adds a permission to a queue for a specific principal.
`AddPermissionResult`	`addPermission(String queueUrl, String label, List<String> aWSAccountIds, List<String> actions)` Simplified method form for invoking the AddPermission operation.
`Future<AddPermissionResult>`	`addPermissionAsync(AddPermissionRequest addPermissionRequest)` Adds a permission to a queue for a specific principal.
`Future<AddPermissionResult>`	`addPermissionAsync(AddPermissionRequest addPermissionRequest, AsyncHandler<AddPermissionRequest,AddPermissionResult> asyncHandler)` Adds a permission to a queue for a specific principal.
`Future<AddPermissionResult>`	`addPermissionAsync(String queueUrl, String label, List<String> aWSAccountIds, List<String> actions)` Simplified method form for invoking the AddPermission operation.
`Future<AddPermissionResult>`	`addPermissionAsync(String queueUrl, String label, List<String> aWSAccountIds, List<String> actions, AsyncHandler<AddPermissionRequest,AddPermissionResult> asyncHandler)` Simplified method form for invoking the AddPermission operation with an AsyncHandler.
`CancelMessageMoveTaskResult`	`cancelMessageMoveTask(CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest)` Cancels a specified message movement task.
`Future<CancelMessageMoveTaskResult>`	`cancelMessageMoveTaskAsync(CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest)` Cancels a specified message movement task.
`Future<CancelMessageMoveTaskResult>`	`cancelMessageMoveTaskAsync(CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest, AsyncHandler<CancelMessageMoveTaskRequest,CancelMessageMoveTaskResult> asyncHandler)` Cancels a specified message movement task.
`ChangeMessageVisibilityResult`	`changeMessageVisibility(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)` Changes the visibility timeout of a specified message in a queue to a new value.
`ChangeMessageVisibilityResult`	`changeMessageVisibility(String queueUrl, String receiptHandle, Integer visibilityTimeout)` Simplified method form for invoking the ChangeMessageVisibility operation.
`Future<ChangeMessageVisibilityResult>`	`changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)` Changes the visibility timeout of a specified message in a queue to a new value.
`Future<ChangeMessageVisibilityResult>`	`changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest, AsyncHandler<ChangeMessageVisibilityRequest,ChangeMessageVisibilityResult> asyncHandler)` Changes the visibility timeout of a specified message in a queue to a new value.
`Future<ChangeMessageVisibilityResult>`	`changeMessageVisibilityAsync(String queueUrl, String receiptHandle, Integer visibilityTimeout)` Simplified method form for invoking the ChangeMessageVisibility operation.
`Future<ChangeMessageVisibilityResult>`	`changeMessageVisibilityAsync(String queueUrl, String receiptHandle, Integer visibilityTimeout, AsyncHandler<ChangeMessageVisibilityRequest,ChangeMessageVisibilityResult> asyncHandler)` Simplified method form for invoking the ChangeMessageVisibility operation with an AsyncHandler.
`ChangeMessageVisibilityBatchResult`	`changeMessageVisibilityBatch(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)` Changes the visibility timeout of multiple messages.
`ChangeMessageVisibilityBatchResult`	`changeMessageVisibilityBatch(String queueUrl, List<ChangeMessageVisibilityBatchRequestEntry> entries)` Simplified method form for invoking the ChangeMessageVisibilityBatch operation.
`Future<ChangeMessageVisibilityBatchResult>`	`changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)` Changes the visibility timeout of multiple messages.
`Future<ChangeMessageVisibilityBatchResult>`	`changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest, AsyncHandler<ChangeMessageVisibilityBatchRequest,ChangeMessageVisibilityBatchResult> asyncHandler)` Changes the visibility timeout of multiple messages.
`Future<ChangeMessageVisibilityBatchResult>`	`changeMessageVisibilityBatchAsync(String queueUrl, List<ChangeMessageVisibilityBatchRequestEntry> entries)` Simplified method form for invoking the ChangeMessageVisibilityBatch operation.
`Future<ChangeMessageVisibilityBatchResult>`	`changeMessageVisibilityBatchAsync(String queueUrl, List<ChangeMessageVisibilityBatchRequestEntry> entries, AsyncHandler<ChangeMessageVisibilityBatchRequest,ChangeMessageVisibilityBatchResult> asyncHandler)` Simplified method form for invoking the ChangeMessageVisibilityBatch operation with an AsyncHandler.
`CreateQueueResult`	`createQueue(CreateQueueRequest createQueueRequest)` Creates a new standard or FIFO queue.
`CreateQueueResult`	`createQueue(String queueName)` Simplified method form for invoking the CreateQueue operation.
`Future<CreateQueueResult>`	`createQueueAsync(CreateQueueRequest createQueueRequest)` Creates a new standard or FIFO queue.
`Future<CreateQueueResult>`	`createQueueAsync(CreateQueueRequest createQueueRequest, AsyncHandler<CreateQueueRequest,CreateQueueResult> asyncHandler)` Creates a new standard or FIFO queue.
`Future<CreateQueueResult>`	`createQueueAsync(String queueName)` Simplified method form for invoking the CreateQueue operation.
`Future<CreateQueueResult>`	`createQueueAsync(String queueName, AsyncHandler<CreateQueueRequest,CreateQueueResult> asyncHandler)` Simplified method form for invoking the CreateQueue operation with an AsyncHandler.
`DeleteMessageResult`	`deleteMessage(DeleteMessageRequest deleteMessageRequest)` Deletes the specified message from the specified queue.
`DeleteMessageResult`	`deleteMessage(String queueUrl, String receiptHandle)` Simplified method form for invoking the DeleteMessage operation.
`Future<DeleteMessageResult>`	`deleteMessageAsync(DeleteMessageRequest deleteMessageRequest)` Deletes the specified message from the specified queue.
`Future<DeleteMessageResult>`	`deleteMessageAsync(DeleteMessageRequest deleteMessageRequest, AsyncHandler<DeleteMessageRequest,DeleteMessageResult> asyncHandler)` Deletes the specified message from the specified queue.
`Future<DeleteMessageResult>`	`deleteMessageAsync(String queueUrl, String receiptHandle)` Simplified method form for invoking the DeleteMessage operation.
`Future<DeleteMessageResult>`	`deleteMessageAsync(String queueUrl, String receiptHandle, AsyncHandler<DeleteMessageRequest,DeleteMessageResult> asyncHandler)` Simplified method form for invoking the DeleteMessage operation with an AsyncHandler.
`DeleteMessageBatchResult`	`deleteMessageBatch(DeleteMessageBatchRequest deleteMessageBatchRequest)` Deletes up to ten messages from the specified queue.
`DeleteMessageBatchResult`	`deleteMessageBatch(String queueUrl, List<DeleteMessageBatchRequestEntry> entries)` Simplified method form for invoking the DeleteMessageBatch operation.
`Future<DeleteMessageBatchResult>`	`deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest)` Deletes up to ten messages from the specified queue.
`Future<DeleteMessageBatchResult>`	`deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest, AsyncHandler<DeleteMessageBatchRequest,DeleteMessageBatchResult> asyncHandler)` Deletes up to ten messages from the specified queue.
`Future<DeleteMessageBatchResult>`	`deleteMessageBatchAsync(String queueUrl, List<DeleteMessageBatchRequestEntry> entries)` Simplified method form for invoking the DeleteMessageBatch operation.
`Future<DeleteMessageBatchResult>`	`deleteMessageBatchAsync(String queueUrl, List<DeleteMessageBatchRequestEntry> entries, AsyncHandler<DeleteMessageBatchRequest,DeleteMessageBatchResult> asyncHandler)` Simplified method form for invoking the DeleteMessageBatch operation with an AsyncHandler.
`DeleteQueueResult`	`deleteQueue(DeleteQueueRequest deleteQueueRequest)` Deletes the queue specified by the `QueueUrl`, regardless of the queue's contents.
`DeleteQueueResult`	`deleteQueue(String queueUrl)` Simplified method form for invoking the DeleteQueue operation.
`Future<DeleteQueueResult>`	`deleteQueueAsync(DeleteQueueRequest deleteQueueRequest)` Deletes the queue specified by the `QueueUrl`, regardless of the queue's contents.
`Future<DeleteQueueResult>`	`deleteQueueAsync(DeleteQueueRequest deleteQueueRequest, AsyncHandler<DeleteQueueRequest,DeleteQueueResult> asyncHandler)` Deletes the queue specified by the `QueueUrl`, regardless of the queue's contents.
`Future<DeleteQueueResult>`	`deleteQueueAsync(String queueUrl)` Simplified method form for invoking the DeleteQueue operation.
`Future<DeleteQueueResult>`	`deleteQueueAsync(String queueUrl, AsyncHandler<DeleteQueueRequest,DeleteQueueResult> asyncHandler)` Simplified method form for invoking the DeleteQueue operation with an AsyncHandler.
`void`	`flush()` Flushes all outstanding outbound requests.
`ResponseMetadata`	`getCachedResponseMetadata(AmazonWebServiceRequest request)` Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected.
`GetQueueAttributesResult`	`getQueueAttributes(GetQueueAttributesRequest getQueueAttributesRequest)` Gets attributes for the specified queue.
`GetQueueAttributesResult`	`getQueueAttributes(String queueUrl, List<String> attributeNames)` Simplified method form for invoking the GetQueueAttributes operation.
`Future<GetQueueAttributesResult>`	`getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest)` Gets attributes for the specified queue.
`Future<GetQueueAttributesResult>`	`getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest, AsyncHandler<GetQueueAttributesRequest,GetQueueAttributesResult> asyncHandler)` Gets attributes for the specified queue.
`Future<GetQueueAttributesResult>`	`getQueueAttributesAsync(String queueUrl, List<String> attributeNames)` Simplified method form for invoking the GetQueueAttributes operation.
`Future<GetQueueAttributesResult>`	`getQueueAttributesAsync(String queueUrl, List<String> attributeNames, AsyncHandler<GetQueueAttributesRequest,GetQueueAttributesResult> asyncHandler)` Simplified method form for invoking the GetQueueAttributes operation with an AsyncHandler.
`GetQueueUrlResult`	`getQueueUrl(GetQueueUrlRequest getQueueUrlRequest)` Returns the URL of an existing Amazon SQS queue.
`GetQueueUrlResult`	`getQueueUrl(String queueName)` Simplified method form for invoking the GetQueueUrl operation.
`Future<GetQueueUrlResult>`	`getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest)` Returns the URL of an existing Amazon SQS queue.
`Future<GetQueueUrlResult>`	`getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest, AsyncHandler<GetQueueUrlRequest,GetQueueUrlResult> asyncHandler)` Returns the URL of an existing Amazon SQS queue.
`Future<GetQueueUrlResult>`	`getQueueUrlAsync(String queueName)` Simplified method form for invoking the GetQueueUrl operation.
`Future<GetQueueUrlResult>`	`getQueueUrlAsync(String queueName, AsyncHandler<GetQueueUrlRequest,GetQueueUrlResult> asyncHandler)` Simplified method form for invoking the GetQueueUrl operation with an AsyncHandler.
`ListDeadLetterSourceQueuesResult`	`listDeadLetterSourceQueues(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)` Returns a list of your queues that have the `RedrivePolicy` queue attribute configured with a dead-letter queue.
`Future<ListDeadLetterSourceQueuesResult>`	`listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)` Returns a list of your queues that have the `RedrivePolicy` queue attribute configured with a dead-letter queue.
`Future<ListDeadLetterSourceQueuesResult>`	`listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest, AsyncHandler<ListDeadLetterSourceQueuesRequest,ListDeadLetterSourceQueuesResult> asyncHandler)` Returns a list of your queues that have the `RedrivePolicy` queue attribute configured with a dead-letter queue.
`ListMessageMoveTasksResult`	`listMessageMoveTasks(ListMessageMoveTasksRequest listMessageMoveTasksRequest)` Gets the most recent message movement tasks (up to 10) under a specific source queue.
`Future<ListMessageMoveTasksResult>`	`listMessageMoveTasksAsync(ListMessageMoveTasksRequest listMessageMoveTasksRequest)` Gets the most recent message movement tasks (up to 10) under a specific source queue.
`Future<ListMessageMoveTasksResult>`	`listMessageMoveTasksAsync(ListMessageMoveTasksRequest listMessageMoveTasksRequest, AsyncHandler<ListMessageMoveTasksRequest,ListMessageMoveTasksResult> asyncHandler)` Gets the most recent message movement tasks (up to 10) under a specific source queue.
`ListQueuesResult`	`listQueues()` Simplified method form for invoking the ListQueues operation.
`ListQueuesResult`	`listQueues(ListQueuesRequest listQueuesRequest)` Returns a list of your queues in the current region.
`ListQueuesResult`	`listQueues(String queueNamePrefix)` Simplified method form for invoking the ListQueues operation.
`Future<ListQueuesResult>`	`listQueuesAsync()` Simplified method form for invoking the ListQueues operation.
`Future<ListQueuesResult>`	`listQueuesAsync(AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)` Simplified method form for invoking the ListQueues operation with an AsyncHandler.
`Future<ListQueuesResult>`	`listQueuesAsync(ListQueuesRequest listQueuesRequest)` Returns a list of your queues in the current region.
`Future<ListQueuesResult>`	`listQueuesAsync(ListQueuesRequest listQueuesRequest, AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)` Returns a list of your queues in the current region.
`Future<ListQueuesResult>`	`listQueuesAsync(String queueNamePrefix)` Simplified method form for invoking the ListQueues operation.
`Future<ListQueuesResult>`	`listQueuesAsync(String queueNamePrefix, AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)` Simplified method form for invoking the ListQueues operation with an AsyncHandler.
`ListQueueTagsResult`	`listQueueTags(ListQueueTagsRequest listQueueTagsRequest)` List all cost allocation tags added to the specified Amazon SQS queue.
`ListQueueTagsResult`	`listQueueTags(String queueUrl)` Simplified method form for invoking the ListQueueTags operation.
`Future<ListQueueTagsResult>`	`listQueueTagsAsync(ListQueueTagsRequest listQueueTagsRequest)` List all cost allocation tags added to the specified Amazon SQS queue.
`Future<ListQueueTagsResult>`	`listQueueTagsAsync(ListQueueTagsRequest listQueueTagsRequest, AsyncHandler<ListQueueTagsRequest,ListQueueTagsResult> asyncHandler)` List all cost allocation tags added to the specified Amazon SQS queue.
`Future<ListQueueTagsResult>`	`listQueueTagsAsync(String queueUrl)` Simplified method form for invoking the ListQueueTags operation.
`Future<ListQueueTagsResult>`	`listQueueTagsAsync(String queueUrl, AsyncHandler<ListQueueTagsRequest,ListQueueTagsResult> asyncHandler)` Simplified method form for invoking the ListQueueTags operation with an AsyncHandler.
`PurgeQueueResult`	`purgeQueue(PurgeQueueRequest purgeQueueRequest)` Deletes available messages in a queue (including in-flight messages) specified by the `QueueURL` parameter.
`Future<PurgeQueueResult>`	`purgeQueueAsync(PurgeQueueRequest purgeQueueRequest)` Deletes available messages in a queue (including in-flight messages) specified by the `QueueURL` parameter.
`Future<PurgeQueueResult>`	`purgeQueueAsync(PurgeQueueRequest purgeQueueRequest, AsyncHandler<PurgeQueueRequest,PurgeQueueResult> asyncHandler)` Deletes available messages in a queue (including in-flight messages) specified by the `QueueURL` parameter.
`ReceiveMessageResult`	`receiveMessage(ReceiveMessageRequest receiveMessageRequest)` Retrieves one or more messages (up to 10), from the specified queue.
`ReceiveMessageResult`	`receiveMessage(String queueUrl)` Simplified method form for invoking the ReceiveMessage operation.
`Future<ReceiveMessageResult>`	`receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest)` Retrieves one or more messages (up to 10), from the specified queue.
`Future<ReceiveMessageResult>`	`receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest, AsyncHandler<ReceiveMessageRequest,ReceiveMessageResult> asyncHandler)` Retrieves one or more messages (up to 10), from the specified queue.
`Future<ReceiveMessageResult>`	`receiveMessageAsync(String queueUrl)` Simplified method form for invoking the ReceiveMessage operation.
`Future<ReceiveMessageResult>`	`receiveMessageAsync(String queueUrl, AsyncHandler<ReceiveMessageRequest,ReceiveMessageResult> asyncHandler)` Simplified method form for invoking the ReceiveMessage operation with an AsyncHandler.
`RemovePermissionResult`	`removePermission(RemovePermissionRequest removePermissionRequest)` Revokes any permissions in the queue policy that matches the specified `Label` parameter.
`RemovePermissionResult`	`removePermission(String queueUrl, String label)` Simplified method form for invoking the RemovePermission operation.
`Future<RemovePermissionResult>`	`removePermissionAsync(RemovePermissionRequest removePermissionRequest)` Revokes any permissions in the queue policy that matches the specified `Label` parameter.
`Future<RemovePermissionResult>`	`removePermissionAsync(RemovePermissionRequest removePermissionRequest, AsyncHandler<RemovePermissionRequest,RemovePermissionResult> asyncHandler)` Revokes any permissions in the queue policy that matches the specified `Label` parameter.
`Future<RemovePermissionResult>`	`removePermissionAsync(String queueUrl, String label)` Simplified method form for invoking the RemovePermission operation.
`Future<RemovePermissionResult>`	`removePermissionAsync(String queueUrl, String label, AsyncHandler<RemovePermissionRequest,RemovePermissionResult> asyncHandler)` Simplified method form for invoking the RemovePermission operation with an AsyncHandler.
`SendMessageResult`	`sendMessage(SendMessageRequest sendMessageRequest)` Delivers a message to the specified queue.
`SendMessageResult`	`sendMessage(String queueUrl, String messageBody)` Simplified method form for invoking the SendMessage operation.
`Future<SendMessageResult>`	`sendMessageAsync(SendMessageRequest sendMessageRequest)` Delivers a message to the specified queue.
`Future<SendMessageResult>`	`sendMessageAsync(SendMessageRequest sendMessageRequest, AsyncHandler<SendMessageRequest,SendMessageResult> asyncHandler)` Delivers a message to the specified queue.
`Future<SendMessageResult>`	`sendMessageAsync(String queueUrl, String messageBody)` Simplified method form for invoking the SendMessage operation.
`Future<SendMessageResult>`	`sendMessageAsync(String queueUrl, String messageBody, AsyncHandler<SendMessageRequest,SendMessageResult> asyncHandler)` Simplified method form for invoking the SendMessage operation with an AsyncHandler.
`SendMessageBatchResult`	`sendMessageBatch(SendMessageBatchRequest sendMessageBatchRequest)` You can use `SendMessageBatch` to send up to 10 messages to the specified queue by assigning either identical or different values to each message (or by not assigning values at all).
`SendMessageBatchResult`	`sendMessageBatch(String queueUrl, List<SendMessageBatchRequestEntry> entries)` Simplified method form for invoking the SendMessageBatch operation.
`Future<SendMessageBatchResult>`	`sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest)` You can use `SendMessageBatch` to send up to 10 messages to the specified queue by assigning either identical or different values to each message (or by not assigning values at all).
`Future<SendMessageBatchResult>`	`sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest, AsyncHandler<SendMessageBatchRequest,SendMessageBatchResult> asyncHandler)` You can use `SendMessageBatch` to send up to 10 messages to the specified queue by assigning either identical or different values to each message (or by not assigning values at all).
`Future<SendMessageBatchResult>`	`sendMessageBatchAsync(String queueUrl, List<SendMessageBatchRequestEntry> entries)` Simplified method form for invoking the SendMessageBatch operation.
`Future<SendMessageBatchResult>`	`sendMessageBatchAsync(String queueUrl, List<SendMessageBatchRequestEntry> entries, AsyncHandler<SendMessageBatchRequest,SendMessageBatchResult> asyncHandler)` Simplified method form for invoking the SendMessageBatch operation with an AsyncHandler.
`void`	`setEndpoint(String endpoint)` Overrides the default endpoint for this client ("https://sqs.us-east-1.amazonaws.com").
`SetQueueAttributesResult`	`setQueueAttributes(SetQueueAttributesRequest setQueueAttributesRequest)` Sets the value of one or more queue attributes.
`SetQueueAttributesResult`	`setQueueAttributes(String queueUrl, Map<String,String> attributes)` Simplified method form for invoking the SetQueueAttributes operation.
`Future<SetQueueAttributesResult>`	`setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest)` Sets the value of one or more queue attributes.
`Future<SetQueueAttributesResult>`	`setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest, AsyncHandler<SetQueueAttributesRequest,SetQueueAttributesResult> asyncHandler)` Sets the value of one or more queue attributes.
`Future<SetQueueAttributesResult>`	`setQueueAttributesAsync(String queueUrl, Map<String,String> attributes)` Simplified method form for invoking the SetQueueAttributes operation.
`Future<SetQueueAttributesResult>`	`setQueueAttributesAsync(String queueUrl, Map<String,String> attributes, AsyncHandler<SetQueueAttributesRequest,SetQueueAttributesResult> asyncHandler)` Simplified method form for invoking the SetQueueAttributes operation with an AsyncHandler.
`void`	`setRegion(Region region)` An alternative to `AmazonSQS.setEndpoint(String)`, sets the regional endpoint for this client's service calls.
`void`	`shutdown()` Shuts down this client object, releasing any resources that might be held open.
`StartMessageMoveTaskResult`	`startMessageMoveTask(StartMessageMoveTaskRequest startMessageMoveTaskRequest)` Starts an asynchronous task to move messages from a specified source queue to a specified destination queue.
`Future<StartMessageMoveTaskResult>`	`startMessageMoveTaskAsync(StartMessageMoveTaskRequest startMessageMoveTaskRequest)` Starts an asynchronous task to move messages from a specified source queue to a specified destination queue.
`Future<StartMessageMoveTaskResult>`	`startMessageMoveTaskAsync(StartMessageMoveTaskRequest startMessageMoveTaskRequest, AsyncHandler<StartMessageMoveTaskRequest,StartMessageMoveTaskResult> asyncHandler)` Starts an asynchronous task to move messages from a specified source queue to a specified destination queue.
`TagQueueResult`	`tagQueue(String queueUrl, Map<String,String> tags)` Simplified method form for invoking the TagQueue operation.
`TagQueueResult`	`tagQueue(TagQueueRequest tagQueueRequest)` Add cost allocation tags to the specified Amazon SQS queue.
`Future<TagQueueResult>`	`tagQueueAsync(String queueUrl, Map<String,String> tags)` Simplified method form for invoking the TagQueue operation.
`Future<TagQueueResult>`	`tagQueueAsync(String queueUrl, Map<String,String> tags, AsyncHandler<TagQueueRequest,TagQueueResult> asyncHandler)` Simplified method form for invoking the TagQueue operation with an AsyncHandler.
`Future<TagQueueResult>`	`tagQueueAsync(TagQueueRequest tagQueueRequest)` Add cost allocation tags to the specified Amazon SQS queue.
`Future<TagQueueResult>`	`tagQueueAsync(TagQueueRequest tagQueueRequest, AsyncHandler<TagQueueRequest,TagQueueResult> asyncHandler)` Add cost allocation tags to the specified Amazon SQS queue.
`UntagQueueResult`	`untagQueue(String queueUrl, List<String> tagKeys)` Simplified method form for invoking the UntagQueue operation.
`UntagQueueResult`	`untagQueue(UntagQueueRequest untagQueueRequest)` Remove cost allocation tags from the specified Amazon SQS queue.
`Future<UntagQueueResult>`	`untagQueueAsync(String queueUrl, List<String> tagKeys)` Simplified method form for invoking the UntagQueue operation.
`Future<UntagQueueResult>`	`untagQueueAsync(String queueUrl, List<String> tagKeys, AsyncHandler<UntagQueueRequest,UntagQueueResult> asyncHandler)` Simplified method form for invoking the UntagQueue operation with an AsyncHandler.
`Future<UntagQueueResult>`	`untagQueueAsync(UntagQueueRequest untagQueueRequest)` Remove cost allocation tags from the specified Amazon SQS queue.
`Future<UntagQueueResult>`	`untagQueueAsync(UntagQueueRequest untagQueueRequest, AsyncHandler<UntagQueueRequest,UntagQueueResult> asyncHandler)` Remove cost allocation tags from the specified Amazon SQS queue.

Methods inherited from class java.lang.Object
equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - USER_AGENT
```
public static final String USER_AGENT
```
- Constructor Detail
  - AmazonSQSBufferedAsyncClient
```
public AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS)
```
  - AmazonSQSBufferedAsyncClient
```
public AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS,
                                    QueueBufferConfig config)
```
- Method Detail
  - setRegion
```
public void setRegion(Region region)
               throws IllegalArgumentException
```
    Description copied from interface: AmazonSQS
    
    An alternative to AmazonSQS.setEndpoint(String), sets the regional endpoint for this client's service calls. Callers can use this method to control which AWS region they want to work with.
    By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the ClientConfiguration supplied at construction.
    This method is not threadsafe. A region should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
    
    Specified by:
    
    setRegion in interface AmazonSQS
    
    Parameters:
    
    region - The region this client will communicate with. See Region.getRegion(com.amazonaws.regions.Regions) for accessing a given region. Must not be null and must be a region where the service is available.
    
    Throws:
    
    IllegalArgumentException
    
    See Also:
    
    Region.getRegion(com.amazonaws.regions.Regions), Region.createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration), Region.isServiceSupported(String)
  - setQueueAttributes
```
public SetQueueAttributesResult setQueueAttributes(SetQueueAttributesRequest setQueueAttributesRequest)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the MessageRetentionPeriod is reduced below the age of existing messages.
    In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    Specified by:
    
    setQueueAttributes in interface AmazonSQS
    
    Returns:
    
    Result of the SetQueueAttributes operation returned by the service.
    
    Throws:
    
    InvalidAttributeNameException - The specified attribute doesn't exist.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - changeMessageVisibilityBatch
```
public ChangeMessageVisibilityBatchResult changeMessageVisibilityBatch(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Specified by:
    
    changeMessageVisibilityBatch in interface AmazonSQS
    
    Returns:
    
    Result of the ChangeMessageVisibilityBatch operation returned by the service.
    
    Throws:
    
    TooManyEntriesInBatchRequestException - The batch request contains more entries than permissible.
    
    EmptyBatchRequestException - The batch request doesn't contain any entries.
    
    BatchEntryIdsNotDistinctException - Two or more batch entries in the request have the same Id.
    
    InvalidBatchEntryIdException - The Id of a batch entry in a batch request doesn't abide by the specification.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - changeMessageVisibility
```
public ChangeMessageVisibilityResult changeMessageVisibility(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)
                                                      throws AmazonServiceException,
                                                             AmazonClientException
```
    Description copied from interface: AmazonSQS
    Changes the visibility timeout of a specified message in a queue to a new value. The default visibility timeout for a message is 30 seconds. The minimum is 0 seconds. The maximum is 12 hours. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    For example, if the default timeout for a queue is 60 seconds, 15 seconds have elapsed since you received the message, and you send a ChangeMessageVisibility call with VisibilityTimeout set to 10 seconds, the 10 seconds begin to count from the time that you make the ChangeMessageVisibility call. Thus, any attempt to change the visibility timeout or to delete that message 10 seconds after you initially change the visibility timeout (a total of 25 seconds) might result in an error.
    
    An Amazon SQS message has three basic states:
    1. Sent to a queue by a producer.
    2. Received from the queue by a consumer.
    3. Deleted from the queue.
    A message is considered to be stored after it is sent to a queue by a producer, but not yet received from the queue by a consumer (that is, between states 1 and 2). There is no limit to the number of stored messages. A message is considered to be in flight after it is received from a queue by a consumer, but not yet deleted from the queue (that is, between states 2 and 3). There is a limit to the number of in flight messages.
    
    Limits that apply to in flight messages are unrelated to the unlimited number of stored messages.
    
    For most standard queues (depending on queue traffic and message backlog), there can be a maximum of approximately 120,000 in flight messages (received from a queue by a consumer, but not yet deleted from the queue). If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages. To request a limit increase, file a support request.
    
    For FIFO queues, there can be a maximum of 20,000 in flight messages (received from a queue by a consumer, but not yet deleted from the queue). If you reach this limit, Amazon SQS returns no error messages.
    
    If you attempt to set the VisibilityTimeout to a value greater than the maximum time left, Amazon SQS returns an error. Amazon SQS doesn't automatically recalculate and increase the timeout to the maximum remaining time.
    
    Unlike with a queue, when you change the visibility timeout for a specific message the timeout value is applied immediately but isn't saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message reverts to the original timeout value (not to the value you set using the ChangeMessageVisibility action) the next time the message is received.
    Specified by:
    
    changeMessageVisibility in interface AmazonSQS
    
    Returns:
    
    Result of the ChangeMessageVisibility operation returned by the service.
    
    Throws:
    
    MessageNotInflightException - The specified message isn't in flight.
    
    ReceiptHandleIsInvalidException - The specified receipt handle isn't valid.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - sendMessageBatch
```
public SendMessageBatchResult sendMessageBatch(SendMessageBatchRequest sendMessageBatchRequest)
                                        throws AmazonServiceException,
                                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    You can use SendMessageBatch to send up to 10 messages to the specified queue by assigning either identical or different values to each message (or by not assigning values at all). This is a batch version of SendMessage. For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
    
    The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KiB (262,144 bytes).
    
    A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
    
    #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
    
    Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
    
    If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue.
    
    Specified by:
    
    sendMessageBatch in interface AmazonSQS
    
    Returns:
    
    Result of the SendMessageBatch operation returned by the service.
    
    Throws:
    
    TooManyEntriesInBatchRequestException - The batch request contains more entries than permissible.
    
    EmptyBatchRequestException - The batch request doesn't contain any entries.
    
    BatchEntryIdsNotDistinctException - Two or more batch entries in the request have the same Id.
    
    BatchRequestTooLongException - The length of all the messages put together is more than the limit.
    
    InvalidBatchEntryIdException - The Id of a batch entry in a batch request doesn't abide by the specification.
    
    UnsupportedOperationException - Error code 400. Unsupported operation.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - sendMessage
```
public SendMessageResult sendMessage(SendMessageRequest sendMessageRequest)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Delivers a message to the specified queue.
    
    A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
    
    #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
    
    Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
    
    Specified by:
    
    sendMessage in interface AmazonSQS
    
    Returns:
    
    Result of the SendMessage operation returned by the service.
    
    Throws:
    
    InvalidMessageContentsException - The message contains characters outside the allowed set.
    
    UnsupportedOperationException - Error code 400. Unsupported operation.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - receiveMessage
```
public ReceiveMessageResult receiveMessage(ReceiveMessageRequest receiveMessageRequest)
                                    throws AmazonServiceException,
                                           AmazonClientException
```
    Description copied from interface: AmazonSQS
    Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon SQS Developer Guide.
    
    Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.
    
    For each message returned, the response includes the following:
    - The message body.
    - An MD5 digest of the message body. For information about MD5, see RFC1321.
    - The MessageId you received when you sent the message to the queue.
    - The receipt handle.
    - The message attributes.
    - An MD5 digest of the message attributes.
    The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
    
    You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead-letter queue.
    
    In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    Specified by:
    
    receiveMessage in interface AmazonSQS
    
    Returns:
    
    Result of the ReceiveMessage operation returned by the service.
    
    Throws:
    
    OverLimitException - The specified action violates a limit. For example, ReceiveMessage returns this error if the maximum number of in flight messages is reached and AddPermission returns this error if the maximum number of permissions for the queue is reached.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteMessageBatch
```
public DeleteMessageBatchResult deleteMessageBatch(DeleteMessageBatchRequest deleteMessageBatchRequest)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the action on each message is reported individually in the response.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Specified by:
    
    deleteMessageBatch in interface AmazonSQS
    
    Returns:
    
    Result of the DeleteMessageBatch operation returned by the service.
    
    Throws:
    
    TooManyEntriesInBatchRequestException - The batch request contains more entries than permissible.
    
    EmptyBatchRequestException - The batch request doesn't contain any entries.
    
    BatchEntryIdsNotDistinctException - Two or more batch entries in the request have the same Id.
    
    InvalidBatchEntryIdException - The Id of a batch entry in a batch request doesn't abide by the specification.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteMessage
```
public DeleteMessageResult deleteMessage(DeleteMessageRequest deleteMessageRequest)
                                  throws AmazonServiceException,
                                         AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes the specified message from the specified queue. To select the message to delete, use the ReceiptHandle of the message (not the MessageId which you receive when you send the message). Amazon SQS can delete a message from a queue even if a visibility timeout setting causes the message to be locked by another consumer. Amazon SQS automatically deletes messages left in a queue longer than the retention period configured for the queue.
    
    The ReceiptHandle is associated with a specific instance of receiving a message. If you receive a message more than once, the ReceiptHandle is different each time you receive a message. When you use the DeleteMessage action, you must provide the most recently received ReceiptHandle for the message (otherwise, the request succeeds, but the message will not be deleted).
    
    For standard queues, it is possible to receive a message even after you delete it. This might happen on rare occasions if one of the servers which stores a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you during a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.
    
    Specified by:
    
    deleteMessage in interface AmazonSQS
    
    Returns:
    
    Result of the DeleteMessage operation returned by the service.
    
    Throws:
    
    InvalidIdFormatException - The specified receipt handle isn't valid for the current version.
    
    ReceiptHandleIsInvalidException - The specified receipt handle isn't valid.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - shutdown
```
public void shutdown()
```
    Description copied from interface: AmazonSQS
    
    Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.
    
    Specified by:
    
    shutdown in interface AmazonSQS
  - flush
```
public void flush()
```
    Flushes all outstanding outbound requests. Calling this method will wait for the pending outbound tasks in the QueueBuffer to finish.
  - changeMessageVisibilityBatchAsync
```
public Future<ChangeMessageVisibilityBatchResult> changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)
                                                                             throws AmazonServiceException,
                                                                                    AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Specified by:
    
    changeMessageVisibilityBatchAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the ChangeMessageVisibilityBatch operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - changeMessageVisibilityAsync
```
public Future<ChangeMessageVisibilityResult> changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)
                                                                   throws AmazonServiceException,
                                                                          AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Changes the visibility timeout of a specified message in a queue to a new value. The default visibility timeout for a message is 30 seconds. The minimum is 0 seconds. The maximum is 12 hours. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    For example, if the default timeout for a queue is 60 seconds, 15 seconds have elapsed since you received the message, and you send a ChangeMessageVisibility call with VisibilityTimeout set to 10 seconds, the 10 seconds begin to count from the time that you make the ChangeMessageVisibility call. Thus, any attempt to change the visibility timeout or to delete that message 10 seconds after you initially change the visibility timeout (a total of 25 seconds) might result in an error.
    
    An Amazon SQS message has three basic states:
    1. Sent to a queue by a producer.
    2. Received from the queue by a consumer.
    3. Deleted from the queue.
    A message is considered to be stored after it is sent to a queue by a producer, but not yet received from the queue by a consumer (that is, between states 1 and 2). There is no limit to the number of stored messages. A message is considered to be in flight after it is received from a queue by a consumer, but not yet deleted from the queue (that is, between states 2 and 3). There is a limit to the number of in flight messages.
    
    Limits that apply to in flight messages are unrelated to the unlimited number of stored messages.
    
    For most standard queues (depending on queue traffic and message backlog), there can be a maximum of approximately 120,000 in flight messages (received from a queue by a consumer, but not yet deleted from the queue). If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages. To request a limit increase, file a support request.
    
    For FIFO queues, there can be a maximum of 20,000 in flight messages (received from a queue by a consumer, but not yet deleted from the queue). If you reach this limit, Amazon SQS returns no error messages.
    
    If you attempt to set the VisibilityTimeout to a value greater than the maximum time left, Amazon SQS returns an error. Amazon SQS doesn't automatically recalculate and increase the timeout to the maximum remaining time.
    
    Unlike with a queue, when you change the visibility timeout for a specific message the timeout value is applied immediately but isn't saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message reverts to the original timeout value (not to the value you set using the ChangeMessageVisibility action) the next time the message is received.
    Specified by:
    
    changeMessageVisibilityAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the ChangeMessageVisibility operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - sendMessageBatchAsync
```
public Future<SendMessageBatchResult> sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest)
                                                     throws AmazonServiceException,
                                                            AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    You can use SendMessageBatch to send up to 10 messages to the specified queue by assigning either identical or different values to each message (or by not assigning values at all). This is a batch version of SendMessage. For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
    
    The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KiB (262,144 bytes).
    
    A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
    
    #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
    
    Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
    
    If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue.
    
    Specified by:
    
    sendMessageBatchAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the SendMessageBatch operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - sendMessageAsync
```
public Future<SendMessageResult> sendMessageAsync(SendMessageRequest sendMessageRequest)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Delivers a message to the specified queue.
    
    A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
    
    #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
    
    Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
    
    Specified by:
    
    sendMessageAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the SendMessage operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - receiveMessageAsync
```
public Future<ReceiveMessageResult> receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest)
                                                 throws AmazonServiceException,
                                                        AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon SQS Developer Guide.
    
    Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.
    
    For each message returned, the response includes the following:
    - The message body.
    - An MD5 digest of the message body. For information about MD5, see RFC1321.
    - The MessageId you received when you sent the message to the queue.
    - The receipt handle.
    - The message attributes.
    - An MD5 digest of the message attributes.
    The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
    
    You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead-letter queue.
    
    In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    Specified by:
    
    receiveMessageAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the ReceiveMessage operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteMessageBatchAsync
```
public Future<DeleteMessageBatchResult> deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the action on each message is reported individually in the response.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Specified by:
    
    deleteMessageBatchAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the DeleteMessageBatch operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - setEndpoint
```
public void setEndpoint(String endpoint)
                 throws IllegalArgumentException
```
    Description copied from interface: AmazonSQS
    
    Overrides the default endpoint for this client ("https://sqs.us-east-1.amazonaws.com"). Callers can use this method to control which AWS region they want to work with.
    Callers can pass in just the endpoint (ex: "sqs.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "https://sqs.us-east-1.amazonaws.com"). If the protocol is not specified here, the default protocol from this client's ClientConfiguration will be used, which by default is HTTPS.
    For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/java-dg-region-selection.html#region-selection- choose-endpoint
    This method is not threadsafe. An endpoint should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
    
    Specified by:
    
    setEndpoint in interface AmazonSQS
    
    Parameters:
    
    endpoint - The endpoint (ex: "sqs.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "https://sqs.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will communicate with.
    
    Throws:
    
    IllegalArgumentException
  - setQueueAttributesAsync
```
public Future<SetQueueAttributesResult> setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the MessageRetentionPeriod is reduced below the age of existing messages.
    In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    Specified by:
    
    setQueueAttributesAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the SetQueueAttributes operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - getQueueUrlAsync
```
public Future<GetQueueUrlResult> getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns the URL of an existing Amazon SQS queue.
    
    To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Allow Developers to Write Messages to a Shared Queue in the Amazon SQS Developer Guide.
    
    Specified by:
    
    getQueueUrlAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the GetQueueUrl operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - removePermissionAsync
```
public Future<RemovePermissionResult> removePermissionAsync(RemovePermissionRequest removePermissionRequest)
                                                     throws AmazonServiceException,
                                                            AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Revokes any permissions in the queue policy that matches the specified Label parameter.
    Only the owner of a queue can remove permissions from it.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    Specified by:
    
    removePermissionAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the RemovePermission operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - getQueueUrl
```
public GetQueueUrlResult getQueueUrl(GetQueueUrlRequest getQueueUrlRequest)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns the URL of an existing Amazon SQS queue.
    
    To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Allow Developers to Write Messages to a Shared Queue in the Amazon SQS Developer Guide.
    
    Specified by:
    
    getQueueUrl in interface AmazonSQS
    
    Returns:
    
    Result of the GetQueueUrl operation returned by the service.
    
    Throws:
    
    QueueDoesNotExistException - The specified queue doesn't exist.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - removePermission
```
public RemovePermissionResult removePermission(RemovePermissionRequest removePermissionRequest)
                                        throws AmazonServiceException,
                                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    Revokes any permissions in the queue policy that matches the specified Label parameter.
    Only the owner of a queue can remove permissions from it.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    Specified by:
    
    removePermission in interface AmazonSQS
    
    Returns:
    
    Result of the RemovePermission operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - getQueueAttributesAsync
```
public Future<GetQueueAttributesResult> getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Gets attributes for the specified queue.
    
    To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
    
    Specified by:
    
    getQueueAttributesAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the GetQueueAttributes operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - getQueueAttributes
```
public GetQueueAttributesResult getQueueAttributes(GetQueueAttributesRequest getQueueAttributesRequest)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Gets attributes for the specified queue.
    
    To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
    
    Specified by:
    
    getQueueAttributes in interface AmazonSQS
    
    Returns:
    
    Result of the GetQueueAttributes operation returned by the service.
    
    Throws:
    
    InvalidAttributeNameException - The specified attribute doesn't exist.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - purgeQueueAsync
```
public Future<PurgeQueueResult> purgeQueueAsync(PurgeQueueRequest purgeQueueRequest)
                                         throws AmazonServiceException,
                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes available messages in a queue (including in-flight messages) specified by the QueueURL parameter.
    
    When you use the PurgeQueue action, you can't retrieve any messages deleted from a queue.
    
    The message deletion process takes up to 60 seconds. We recommend waiting for 60 seconds regardless of your queue's size.
    
    Messages sent to the queue before you call PurgeQueue might be received but are deleted within the next minute.
    
    Messages sent to the queue after you call PurgeQueue might be deleted while the queue is being purged.
    
    Specified by:
    
    purgeQueueAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the PurgeQueue operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - purgeQueue
```
public PurgeQueueResult purgeQueue(PurgeQueueRequest purgeQueueRequest)
                            throws AmazonServiceException,
                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes available messages in a queue (including in-flight messages) specified by the QueueURL parameter.
    
    When you use the PurgeQueue action, you can't retrieve any messages deleted from a queue.
    
    The message deletion process takes up to 60 seconds. We recommend waiting for 60 seconds regardless of your queue's size.
    
    Messages sent to the queue before you call PurgeQueue might be received but are deleted within the next minute.
    
    Messages sent to the queue after you call PurgeQueue might be deleted while the queue is being purged.
    
    Specified by:
    
    purgeQueue in interface AmazonSQS
    
    Returns:
    
    Result of the PurgeQueue operation returned by the service.
    
    Throws:
    
    QueueDoesNotExistException - The specified queue doesn't exist.
    
    PurgeQueueInProgressException - Indicates that the specified queue previously received a PurgeQueue request within the last 60 seconds (the time it can take to delete the messages in the queue).
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteQueueAsync
```
public Future<DeleteQueueResult> deleteQueueAsync(DeleteQueueRequest deleteQueueRequest)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the queue specified by the QueueUrl, regardless of the queue's contents.
    
    Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.
    
    When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist.
    
    When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    The delete operation uses the HTTP GET verb.
    
    Specified by:
    
    deleteQueueAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the DeleteQueue operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteQueue
```
public DeleteQueueResult deleteQueue(DeleteQueueRequest deleteQueueRequest)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes the queue specified by the QueueUrl, regardless of the queue's contents.
    
    Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.
    
    When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist.
    
    When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    The delete operation uses the HTTP GET verb.
    
    Specified by:
    
    deleteQueue in interface AmazonSQS
    
    Returns:
    
    Result of the DeleteQueue operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - listQueuesAsync
```
public Future<ListQueuesResult> listQueuesAsync(ListQueuesRequest listQueuesRequest)
                                         throws AmazonServiceException,
                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues in the current region. The response includes a maximum of 1,000 results. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.
    
    The listQueues methods supports pagination. Set parameter MaxResults in the request to specify the maximum number of results to be returned in the response. If you do not set MaxResults, the response includes a maximum of 1,000 results. If you set MaxResults and there are additional results to display, the response includes a value for NextToken. Use NextToken as a parameter in your next request to listQueues to receive the next page of results.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the ListQueues operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - listQueues
```
public ListQueuesResult listQueues(ListQueuesRequest listQueuesRequest)
                            throws AmazonServiceException,
                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns a list of your queues in the current region. The response includes a maximum of 1,000 results. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.
    
    The listQueues methods supports pagination. Set parameter MaxResults in the request to specify the maximum number of results to be returned in the response. If you do not set MaxResults, the response includes a maximum of 1,000 results. If you set MaxResults and there are additional results to display, the response includes a value for NextToken. Use NextToken as a parameter in your next request to listQueues to receive the next page of results.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listQueues in interface AmazonSQS
    
    Returns:
    
    Result of the ListQueues operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - createQueueAsync
```
public Future<CreateQueueResult> createQueueAsync(CreateQueueRequest createQueueRequest)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Creates a new standard or FIFO queue. You can pass one or more attributes in the request. Keep the following in mind:
    - If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
      
      You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
    - If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
    - If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
    
    After you create a queue, you must wait at least one second after the queue is created to be able to use the queue.
    
    To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:
    - If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
    - If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    createQueueAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the CreateQueue operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - createQueue
```
public CreateQueueResult createQueue(CreateQueueRequest createQueueRequest)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    Creates a new standard or FIFO queue. You can pass one or more attributes in the request. Keep the following in mind:
    - If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
      
      You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
    - If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
    - If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
    
    After you create a queue, you must wait at least one second after the queue is created to be able to use the queue.
    
    To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:
    - If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
    - If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    createQueue in interface AmazonSQS
    
    Returns:
    
    Result of the CreateQueue operation returned by the service.
    
    Throws:
    
    QueueDeletedRecentlyException - You must wait 60 seconds after deleting a queue before you can create another queue with the same name.
    
    QueueNameExistsException - A queue with this name already exists. Amazon SQS returns this error only if the request includes attributes whose values differ from those of the existing queue.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - addPermissionAsync
```
public Future<AddPermissionResult> addPermissionAsync(AddPermissionRequest addPermissionRequest)
                                               throws AmazonServiceException,
                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Adds a permission to a queue for a specific principal. This allows sharing access to the queue.
    
    When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Allow Developers to Write Messages to a Shared Queue in the Amazon SQS Developer Guide.
    AddPermission generates a policy for you. You can use SetQueueAttributes to upload your policy. For more information, see Using Custom Policies with the Amazon SQS Access Policy Language in the Amazon SQS Developer Guide.
    
    An Amazon SQS policy can have a maximum of seven actions per statement.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    
    Amazon SQS AddPermission does not support adding a non-account principal.
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    addPermissionAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the AddPermission operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - addPermissionAsync
```
public Future<AddPermissionResult> addPermissionAsync(String queueUrl,
                                                      String label,
                                                      List<String> aWSAccountIds,
                                                      List<String> actions)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the AddPermission operation.
    
    Specified by:
    
    addPermissionAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.addPermissionAsync(AddPermissionRequest)
  - addPermissionAsync
```
public Future<AddPermissionResult> addPermissionAsync(String queueUrl,
                                                      String label,
                                                      List<String> aWSAccountIds,
                                                      List<String> actions,
                                                      AsyncHandler<AddPermissionRequest,AddPermissionResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the AddPermission operation with an AsyncHandler.
    
    Specified by:
    
    addPermissionAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.addPermissionAsync(AddPermissionRequest, com.amazonaws.handlers.AsyncHandler)
  - addPermission
```
public AddPermissionResult addPermission(AddPermissionRequest addPermissionRequest)
                                  throws AmazonServiceException,
                                         AmazonClientException
```
    Description copied from interface: AmazonSQS
    Adds a permission to a queue for a specific principal. This allows sharing access to the queue.
    
    When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Allow Developers to Write Messages to a Shared Queue in the Amazon SQS Developer Guide.
    AddPermission generates a policy for you. You can use SetQueueAttributes to upload your policy. For more information, see Using Custom Policies with the Amazon SQS Access Policy Language in the Amazon SQS Developer Guide.
    
    An Amazon SQS policy can have a maximum of seven actions per statement.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    
    Amazon SQS AddPermission does not support adding a non-account principal.
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    addPermission in interface AmazonSQS
    
    Returns:
    
    Result of the AddPermission operation returned by the service.
    
    Throws:
    
    OverLimitException - The specified action violates a limit. For example, ReceiveMessage returns this error if the maximum number of in flight messages is reached and AddPermission returns this error if the maximum number of permissions for the queue is reached.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - listQueues
```
public ListQueuesResult listQueues()
                            throws AmazonServiceException,
                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the ListQueues operation.
    
    Specified by:
    
    listQueues in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.listQueues(ListQueuesRequest)
  - getCachedResponseMetadata
```
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
```
    Description copied from interface: AmazonSQS
    
    Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.
    Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
    
    Specified by:
    
    getCachedResponseMetadata in interface AmazonSQS
    
    Parameters:
    
    request - The originally executed request.
    
    Returns:
    
    The response metadata for the specified request, or null if none is available.
  - deleteMessageAsync
```
public Future<DeleteMessageResult> deleteMessageAsync(DeleteMessageRequest deleteMessageRequest)
                                               throws AmazonServiceException,
                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the specified message from the specified queue. To select the message to delete, use the ReceiptHandle of the message (not the MessageId which you receive when you send the message). Amazon SQS can delete a message from a queue even if a visibility timeout setting causes the message to be locked by another consumer. Amazon SQS automatically deletes messages left in a queue longer than the retention period configured for the queue.
    
    The ReceiptHandle is associated with a specific instance of receiving a message. If you receive a message more than once, the ReceiptHandle is different each time you receive a message. When you use the DeleteMessage action, you must provide the most recently received ReceiptHandle for the message (otherwise, the request succeeds, but the message will not be deleted).
    
    For standard queues, it is possible to receive a message even after you delete it. This might happen on rare occasions if one of the servers which stores a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you during a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.
    
    Specified by:
    
    deleteMessageAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the DeleteMessage operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - changeMessageVisibilityAsync
```
public Future<ChangeMessageVisibilityResult> changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest,
                                                                          AsyncHandler<ChangeMessageVisibilityRequest,ChangeMessageVisibilityResult> asyncHandler)
                                                                   throws AmazonServiceException,
                                                                          AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Changes the visibility timeout of a specified message in a queue to a new value. The default visibility timeout for a message is 30 seconds. The minimum is 0 seconds. The maximum is 12 hours. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    For example, if the default timeout for a queue is 60 seconds, 15 seconds have elapsed since you received the message, and you send a ChangeMessageVisibility call with VisibilityTimeout set to 10 seconds, the 10 seconds begin to count from the time that you make the ChangeMessageVisibility call. Thus, any attempt to change the visibility timeout or to delete that message 10 seconds after you initially change the visibility timeout (a total of 25 seconds) might result in an error.
    
    An Amazon SQS message has three basic states:
    1. Sent to a queue by a producer.
    2. Received from the queue by a consumer.
    3. Deleted from the queue.
    A message is considered to be stored after it is sent to a queue by a producer, but not yet received from the queue by a consumer (that is, between states 1 and 2). There is no limit to the number of stored messages. A message is considered to be in flight after it is received from a queue by a consumer, but not yet deleted from the queue (that is, between states 2 and 3). There is a limit to the number of in flight messages.
    
    Limits that apply to in flight messages are unrelated to the unlimited number of stored messages.
    
    For most standard queues (depending on queue traffic and message backlog), there can be a maximum of approximately 120,000 in flight messages (received from a queue by a consumer, but not yet deleted from the queue). If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages. To request a limit increase, file a support request.
    
    For FIFO queues, there can be a maximum of 20,000 in flight messages (received from a queue by a consumer, but not yet deleted from the queue). If you reach this limit, Amazon SQS returns no error messages.
    
    If you attempt to set the VisibilityTimeout to a value greater than the maximum time left, Amazon SQS returns an error. Amazon SQS doesn't automatically recalculate and increase the timeout to the maximum remaining time.
    
    Unlike with a queue, when you change the visibility timeout for a specific message the timeout value is applied immediately but isn't saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message reverts to the original timeout value (not to the value you set using the ChangeMessageVisibility action) the next time the message is received.
    Specified by:
    
    changeMessageVisibilityAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ChangeMessageVisibility operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - changeMessageVisibilityAsync
```
public Future<ChangeMessageVisibilityResult> changeMessageVisibilityAsync(String queueUrl,
                                                                          String receiptHandle,
                                                                          Integer visibilityTimeout)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ChangeMessageVisibility operation.
    
    Specified by:
    
    changeMessageVisibilityAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.changeMessageVisibilityAsync(ChangeMessageVisibilityRequest)
  - changeMessageVisibilityAsync
```
public Future<ChangeMessageVisibilityResult> changeMessageVisibilityAsync(String queueUrl,
                                                                          String receiptHandle,
                                                                          Integer visibilityTimeout,
                                                                          AsyncHandler<ChangeMessageVisibilityRequest,ChangeMessageVisibilityResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ChangeMessageVisibility operation with an AsyncHandler.
    
    Specified by:
    
    changeMessageVisibilityAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.changeMessageVisibilityAsync(ChangeMessageVisibilityRequest, com.amazonaws.handlers.AsyncHandler)
  - sendMessageAsync
```
public Future<SendMessageResult> sendMessageAsync(SendMessageRequest sendMessageRequest,
                                                  AsyncHandler<SendMessageRequest,SendMessageResult> asyncHandler)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Delivers a message to the specified queue.
    
    A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
    
    #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
    
    Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
    
    Specified by:
    
    sendMessageAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the SendMessage operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - sendMessageAsync
```
public Future<SendMessageResult> sendMessageAsync(String queueUrl,
                                                  String messageBody)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the SendMessage operation.
    
    Specified by:
    
    sendMessageAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.sendMessageAsync(SendMessageRequest)
  - sendMessageAsync
```
public Future<SendMessageResult> sendMessageAsync(String queueUrl,
                                                  String messageBody,
                                                  AsyncHandler<SendMessageRequest,SendMessageResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the SendMessage operation with an AsyncHandler.
    
    Specified by:
    
    sendMessageAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.sendMessageAsync(SendMessageRequest, com.amazonaws.handlers.AsyncHandler)
  - receiveMessageAsync
```
public Future<ReceiveMessageResult> receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest,
                                                        AsyncHandler<ReceiveMessageRequest,ReceiveMessageResult> asyncHandler)
                                                 throws AmazonServiceException,
                                                        AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon SQS Developer Guide.
    
    Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.
    
    For each message returned, the response includes the following:
    - The message body.
    - An MD5 digest of the message body. For information about MD5, see RFC1321.
    - The MessageId you received when you sent the message to the queue.
    - The receipt handle.
    - The message attributes.
    - An MD5 digest of the message attributes.
    The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
    
    You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead-letter queue.
    
    In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    Specified by:
    
    receiveMessageAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ReceiveMessage operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - receiveMessageAsync
```
public Future<ReceiveMessageResult> receiveMessageAsync(String queueUrl)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ReceiveMessage operation.
    
    Specified by:
    
    receiveMessageAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.receiveMessageAsync(ReceiveMessageRequest)
  - receiveMessageAsync
```
public Future<ReceiveMessageResult> receiveMessageAsync(String queueUrl,
                                                        AsyncHandler<ReceiveMessageRequest,ReceiveMessageResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ReceiveMessage operation with an AsyncHandler.
    
    Specified by:
    
    receiveMessageAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.receiveMessageAsync(ReceiveMessageRequest, com.amazonaws.handlers.AsyncHandler)
  - deleteMessageAsync
```
public Future<DeleteMessageResult> deleteMessageAsync(DeleteMessageRequest deleteMessageRequest,
                                                      AsyncHandler<DeleteMessageRequest,DeleteMessageResult> asyncHandler)
                                               throws AmazonServiceException,
                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the specified message from the specified queue. To select the message to delete, use the ReceiptHandle of the message (not the MessageId which you receive when you send the message). Amazon SQS can delete a message from a queue even if a visibility timeout setting causes the message to be locked by another consumer. Amazon SQS automatically deletes messages left in a queue longer than the retention period configured for the queue.
    
    The ReceiptHandle is associated with a specific instance of receiving a message. If you receive a message more than once, the ReceiptHandle is different each time you receive a message. When you use the DeleteMessage action, you must provide the most recently received ReceiptHandle for the message (otherwise, the request succeeds, but the message will not be deleted).
    
    For standard queues, it is possible to receive a message even after you delete it. This might happen on rare occasions if one of the servers which stores a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you during a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.
    
    Specified by:
    
    deleteMessageAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteMessage operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteMessageAsync
```
public Future<DeleteMessageResult> deleteMessageAsync(String queueUrl,
                                                      String receiptHandle)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the DeleteMessage operation.
    
    Specified by:
    
    deleteMessageAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.deleteMessageAsync(DeleteMessageRequest)
  - deleteMessageAsync
```
public Future<DeleteMessageResult> deleteMessageAsync(String queueUrl,
                                                      String receiptHandle,
                                                      AsyncHandler<DeleteMessageRequest,DeleteMessageResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the DeleteMessage operation with an AsyncHandler.
    
    Specified by:
    
    deleteMessageAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.deleteMessageAsync(DeleteMessageRequest, com.amazonaws.handlers.AsyncHandler)
  - setQueueAttributesAsync
```
public Future<SetQueueAttributesResult> setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest,
                                                                AsyncHandler<SetQueueAttributesRequest,SetQueueAttributesResult> asyncHandler)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the MessageRetentionPeriod is reduced below the age of existing messages.
    In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    Specified by:
    
    setQueueAttributesAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the SetQueueAttributes operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - setQueueAttributesAsync
```
public Future<SetQueueAttributesResult> setQueueAttributesAsync(String queueUrl,
                                                                Map<String,String> attributes)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the SetQueueAttributes operation.
    
    Specified by:
    
    setQueueAttributesAsync in interface AmazonSQSAsync
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQSAsync.setQueueAttributesAsync(SetQueueAttributesRequest)
  - setQueueAttributesAsync
```
public Future<SetQueueAttributesResult> setQueueAttributesAsync(String queueUrl,
                                                                Map<String,String> attributes,
                                                                AsyncHandler<SetQueueAttributesRequest,SetQueueAttributesResult> asyncHandler)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the SetQueueAttributes operation with an AsyncHandler.
    
    Specified by:
    
    setQueueAttributesAsync in interface AmazonSQSAsync
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQSAsync.setQueueAttributesAsync(SetQueueAttributesRequest, com.amazonaws.handlers.AsyncHandler)
  - startMessageMoveTask
```
public StartMessageMoveTaskResult startMessageMoveTask(StartMessageMoveTaskRequest startMessageMoveTaskRequest)
```
    Description copied from interface: AmazonSQS
    Starts an asynchronous task to move messages from a specified source queue to a specified destination queue.
    This action is currently limited to supporting message redrive from queues that are configured as dead-letter queues (DLQs) of other Amazon SQS queues only. Non-SQS queue sources of dead-letter queues, such as Lambda or Amazon SNS topics, are currently not supported.
    
    In dead-letter queues redrive context, the StartMessageMoveTask the source queue is the DLQ, while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues support redrive. FIFO queues don't support redrive.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    startMessageMoveTask in interface AmazonSQS
    
    Returns:
    
    Result of the StartMessageMoveTask operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - startMessageMoveTaskAsync
```
public Future<StartMessageMoveTaskResult> startMessageMoveTaskAsync(StartMessageMoveTaskRequest startMessageMoveTaskRequest)
```
    Description copied from interface: AmazonSQSAsync
    Starts an asynchronous task to move messages from a specified source queue to a specified destination queue.
    This action is currently limited to supporting message redrive from queues that are configured as dead-letter queues (DLQs) of other Amazon SQS queues only. Non-SQS queue sources of dead-letter queues, such as Lambda or Amazon SNS topics, are currently not supported.
    
    In dead-letter queues redrive context, the StartMessageMoveTask the source queue is the DLQ, while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues support redrive. FIFO queues don't support redrive.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    startMessageMoveTaskAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the StartMessageMoveTask operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - startMessageMoveTaskAsync
```
public Future<StartMessageMoveTaskResult> startMessageMoveTaskAsync(StartMessageMoveTaskRequest startMessageMoveTaskRequest,
                                                                    AsyncHandler<StartMessageMoveTaskRequest,StartMessageMoveTaskResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    Starts an asynchronous task to move messages from a specified source queue to a specified destination queue.
    This action is currently limited to supporting message redrive from queues that are configured as dead-letter queues (DLQs) of other Amazon SQS queues only. Non-SQS queue sources of dead-letter queues, such as Lambda or Amazon SNS topics, are currently not supported.
    
    In dead-letter queues redrive context, the StartMessageMoveTask the source queue is the DLQ, while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues support redrive. FIFO queues don't support redrive.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    startMessageMoveTaskAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the StartMessageMoveTask operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - cancelMessageMoveTask
```
public CancelMessageMoveTaskResult cancelMessageMoveTask(CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest)
```
    Description copied from interface: AmazonSQS
    Cancels a specified message movement task. A message movement can only be cancelled when the current status is RUNNING. Cancelling a message movement task does not revert the messages that have already been moved. It can only stop the messages that have not been moved yet.
    This action is currently limited to supporting message redrive from dead-letter queues (DLQs) only. In this context, the source queue is the dead-letter queue (DLQ), while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues are supported.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    cancelMessageMoveTask in interface AmazonSQS
    
    Returns:
    
    Result of the CancelMessageMoveTask operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - cancelMessageMoveTaskAsync
```
public Future<CancelMessageMoveTaskResult> cancelMessageMoveTaskAsync(CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest)
```
    Description copied from interface: AmazonSQSAsync
    Cancels a specified message movement task. A message movement can only be cancelled when the current status is RUNNING. Cancelling a message movement task does not revert the messages that have already been moved. It can only stop the messages that have not been moved yet.
    This action is currently limited to supporting message redrive from dead-letter queues (DLQs) only. In this context, the source queue is the dead-letter queue (DLQ), while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues are supported.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    cancelMessageMoveTaskAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the CancelMessageMoveTask operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - cancelMessageMoveTaskAsync
```
public Future<CancelMessageMoveTaskResult> cancelMessageMoveTaskAsync(CancelMessageMoveTaskRequest cancelMessageMoveTaskRequest,
                                                                      AsyncHandler<CancelMessageMoveTaskRequest,CancelMessageMoveTaskResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    Cancels a specified message movement task. A message movement can only be cancelled when the current status is RUNNING. Cancelling a message movement task does not revert the messages that have already been moved. It can only stop the messages that have not been moved yet.
    This action is currently limited to supporting message redrive from dead-letter queues (DLQs) only. In this context, the source queue is the dead-letter queue (DLQ), while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues are supported.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    cancelMessageMoveTaskAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the CancelMessageMoveTask operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listMessageMoveTasks
```
public ListMessageMoveTasksResult listMessageMoveTasks(ListMessageMoveTasksRequest listMessageMoveTasksRequest)
```
    Description copied from interface: AmazonSQS
    Gets the most recent message movement tasks (up to 10) under a specific source queue.
    This action is currently limited to supporting message redrive from dead-letter queues (DLQs) only. In this context, the source queue is the dead-letter queue (DLQ), while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues are supported.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    listMessageMoveTasks in interface AmazonSQS
    
    Returns:
    
    Result of the ListMessageMoveTasks operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listMessageMoveTasksAsync
```
public Future<ListMessageMoveTasksResult> listMessageMoveTasksAsync(ListMessageMoveTasksRequest listMessageMoveTasksRequest)
```
    Description copied from interface: AmazonSQSAsync
    Gets the most recent message movement tasks (up to 10) under a specific source queue.
    This action is currently limited to supporting message redrive from dead-letter queues (DLQs) only. In this context, the source queue is the dead-letter queue (DLQ), while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues are supported.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    listMessageMoveTasksAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the ListMessageMoveTasks operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listMessageMoveTasksAsync
```
public Future<ListMessageMoveTasksResult> listMessageMoveTasksAsync(ListMessageMoveTasksRequest listMessageMoveTasksRequest,
                                                                    AsyncHandler<ListMessageMoveTasksRequest,ListMessageMoveTasksResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    Gets the most recent message movement tasks (up to 10) under a specific source queue.
    This action is currently limited to supporting message redrive from dead-letter queues (DLQs) only. In this context, the source queue is the dead-letter queue (DLQ), while the destination queue can be the original source queue (from which the messages were driven to the dead-letter-queue), or a custom destination queue.
    
    Currently, only standard queues are supported.
    
    Only one active message movement task is supported per queue at any given time.
    Specified by:
    
    listMessageMoveTasksAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListMessageMoveTasks operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - changeMessageVisibilityBatchAsync
```
public Future<ChangeMessageVisibilityBatchResult> changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest,
                                                                                    AsyncHandler<ChangeMessageVisibilityBatchRequest,ChangeMessageVisibilityBatchResult> asyncHandler)
                                                                             throws AmazonServiceException,
                                                                                    AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Specified by:
    
    changeMessageVisibilityBatchAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ChangeMessageVisibilityBatch operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - changeMessageVisibilityBatchAsync
```
public Future<ChangeMessageVisibilityBatchResult> changeMessageVisibilityBatchAsync(String queueUrl,
                                                                                    List<ChangeMessageVisibilityBatchRequestEntry> entries)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ChangeMessageVisibilityBatch operation.
    
    Specified by:
    
    changeMessageVisibilityBatchAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest)
  - changeMessageVisibilityBatchAsync
```
public Future<ChangeMessageVisibilityBatchResult> changeMessageVisibilityBatchAsync(String queueUrl,
                                                                                    List<ChangeMessageVisibilityBatchRequestEntry> entries,
                                                                                    AsyncHandler<ChangeMessageVisibilityBatchRequest,ChangeMessageVisibilityBatchResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ChangeMessageVisibilityBatch operation with an AsyncHandler.
    
    Specified by:
    
    changeMessageVisibilityBatchAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest, com.amazonaws.handlers.AsyncHandler)
  - getQueueUrlAsync
```
public Future<GetQueueUrlResult> getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest,
                                                  AsyncHandler<GetQueueUrlRequest,GetQueueUrlResult> asyncHandler)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns the URL of an existing Amazon SQS queue.
    
    To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Allow Developers to Write Messages to a Shared Queue in the Amazon SQS Developer Guide.
    
    Specified by:
    
    getQueueUrlAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the GetQueueUrl operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - getQueueUrlAsync
```
public Future<GetQueueUrlResult> getQueueUrlAsync(String queueName)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the GetQueueUrl operation.
    
    Specified by:
    
    getQueueUrlAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.getQueueUrlAsync(GetQueueUrlRequest)
  - getQueueUrlAsync
```
public Future<GetQueueUrlResult> getQueueUrlAsync(String queueName,
                                                  AsyncHandler<GetQueueUrlRequest,GetQueueUrlResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the GetQueueUrl operation with an AsyncHandler.
    
    Specified by:
    
    getQueueUrlAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.getQueueUrlAsync(GetQueueUrlRequest, com.amazonaws.handlers.AsyncHandler)
  - removePermissionAsync
```
public Future<RemovePermissionResult> removePermissionAsync(RemovePermissionRequest removePermissionRequest,
                                                            AsyncHandler<RemovePermissionRequest,RemovePermissionResult> asyncHandler)
                                                     throws AmazonServiceException,
                                                            AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Revokes any permissions in the queue policy that matches the specified Label parameter.
    Only the owner of a queue can remove permissions from it.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    Specified by:
    
    removePermissionAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the RemovePermission operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - removePermissionAsync
```
public Future<RemovePermissionResult> removePermissionAsync(String queueUrl,
                                                            String label)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the RemovePermission operation.
    
    Specified by:
    
    removePermissionAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.removePermissionAsync(RemovePermissionRequest)
  - removePermissionAsync
```
public Future<RemovePermissionResult> removePermissionAsync(String queueUrl,
                                                            String label,
                                                            AsyncHandler<RemovePermissionRequest,RemovePermissionResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the RemovePermission operation with an AsyncHandler.
    
    Specified by:
    
    removePermissionAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.removePermissionAsync(RemovePermissionRequest, com.amazonaws.handlers.AsyncHandler)
  - getQueueAttributesAsync
```
public Future<GetQueueAttributesResult> getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest,
                                                                AsyncHandler<GetQueueAttributesRequest,GetQueueAttributesResult> asyncHandler)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Gets attributes for the specified queue.
    
    To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
    
    Specified by:
    
    getQueueAttributesAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the GetQueueAttributes operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - getQueueAttributesAsync
```
public Future<GetQueueAttributesResult> getQueueAttributesAsync(String queueUrl,
                                                                List<String> attributeNames)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the GetQueueAttributes operation.
    
    Specified by:
    
    getQueueAttributesAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.getQueueAttributesAsync(GetQueueAttributesRequest)
  - getQueueAttributesAsync
```
public Future<GetQueueAttributesResult> getQueueAttributesAsync(String queueUrl,
                                                                List<String> attributeNames,
                                                                AsyncHandler<GetQueueAttributesRequest,GetQueueAttributesResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the GetQueueAttributes operation with an AsyncHandler.
    
    Specified by:
    
    getQueueAttributesAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.getQueueAttributesAsync(GetQueueAttributesRequest, com.amazonaws.handlers.AsyncHandler)
  - sendMessageBatchAsync
```
public Future<SendMessageBatchResult> sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest,
                                                            AsyncHandler<SendMessageBatchRequest,SendMessageBatchResult> asyncHandler)
                                                     throws AmazonServiceException,
                                                            AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    You can use SendMessageBatch to send up to 10 messages to the specified queue by assigning either identical or different values to each message (or by not assigning values at all). This is a batch version of SendMessage. For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
    
    The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KiB (262,144 bytes).
    
    A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
    
    #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
    
    Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
    
    If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue.
    
    Specified by:
    
    sendMessageBatchAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the SendMessageBatch operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - sendMessageBatchAsync
```
public Future<SendMessageBatchResult> sendMessageBatchAsync(String queueUrl,
                                                            List<SendMessageBatchRequestEntry> entries)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the SendMessageBatch operation.
    
    Specified by:
    
    sendMessageBatchAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.sendMessageBatchAsync(SendMessageBatchRequest)
  - sendMessageBatchAsync
```
public Future<SendMessageBatchResult> sendMessageBatchAsync(String queueUrl,
                                                            List<SendMessageBatchRequestEntry> entries,
                                                            AsyncHandler<SendMessageBatchRequest,SendMessageBatchResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the SendMessageBatch operation with an AsyncHandler.
    
    Specified by:
    
    sendMessageBatchAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.sendMessageBatchAsync(SendMessageBatchRequest, com.amazonaws.handlers.AsyncHandler)
  - purgeQueueAsync
```
public Future<PurgeQueueResult> purgeQueueAsync(PurgeQueueRequest purgeQueueRequest,
                                                AsyncHandler<PurgeQueueRequest,PurgeQueueResult> asyncHandler)
                                         throws AmazonServiceException,
                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes available messages in a queue (including in-flight messages) specified by the QueueURL parameter.
    
    When you use the PurgeQueue action, you can't retrieve any messages deleted from a queue.
    
    The message deletion process takes up to 60 seconds. We recommend waiting for 60 seconds regardless of your queue's size.
    
    Messages sent to the queue before you call PurgeQueue might be received but are deleted within the next minute.
    
    Messages sent to the queue after you call PurgeQueue might be deleted while the queue is being purged.
    
    Specified by:
    
    purgeQueueAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the PurgeQueue operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteQueueAsync
```
public Future<DeleteQueueResult> deleteQueueAsync(DeleteQueueRequest deleteQueueRequest,
                                                  AsyncHandler<DeleteQueueRequest,DeleteQueueResult> asyncHandler)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the queue specified by the QueueUrl, regardless of the queue's contents.
    
    Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.
    
    When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist.
    
    When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    The delete operation uses the HTTP GET verb.
    
    Specified by:
    
    deleteQueueAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteQueue operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteQueueAsync
```
public Future<DeleteQueueResult> deleteQueueAsync(String queueUrl)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the DeleteQueue operation.
    
    Specified by:
    
    deleteQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.deleteQueueAsync(DeleteQueueRequest)
  - deleteQueueAsync
```
public Future<DeleteQueueResult> deleteQueueAsync(String queueUrl,
                                                  AsyncHandler<DeleteQueueRequest,DeleteQueueResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the DeleteQueue operation with an AsyncHandler.
    
    Specified by:
    
    deleteQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.deleteQueueAsync(DeleteQueueRequest, com.amazonaws.handlers.AsyncHandler)
  - listQueuesAsync
```
public Future<ListQueuesResult> listQueuesAsync(ListQueuesRequest listQueuesRequest,
                                                AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)
                                         throws AmazonServiceException,
                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues in the current region. The response includes a maximum of 1,000 results. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.
    
    The listQueues methods supports pagination. Set parameter MaxResults in the request to specify the maximum number of results to be returned in the response. If you do not set MaxResults, the response includes a maximum of 1,000 results. If you set MaxResults and there are additional results to display, the response includes a value for NextToken. Use NextToken as a parameter in your next request to listQueues to receive the next page of results.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListQueues operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - listQueuesAsync
```
public Future<ListQueuesResult> listQueuesAsync()
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ListQueues operation.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.listQueuesAsync(ListQueuesRequest)
  - listQueuesAsync
```
public Future<ListQueuesResult> listQueuesAsync(AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ListQueues operation with an AsyncHandler.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.listQueuesAsync(ListQueuesRequest, com.amazonaws.handlers.AsyncHandler)
  - listQueuesAsync
```
public Future<ListQueuesResult> listQueuesAsync(String queueNamePrefix)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ListQueues operation.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.listQueuesAsync(ListQueuesRequest)
  - listQueuesAsync
```
public Future<ListQueuesResult> listQueuesAsync(String queueNamePrefix,
                                                AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ListQueues operation with an AsyncHandler.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.listQueuesAsync(ListQueuesRequest, com.amazonaws.handlers.AsyncHandler)
  - deleteMessageBatchAsync
```
public Future<DeleteMessageBatchResult> deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest,
                                                                AsyncHandler<DeleteMessageBatchRequest,DeleteMessageBatchResult> asyncHandler)
                                                         throws AmazonServiceException,
                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the action on each message is reported individually in the response.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Specified by:
    
    deleteMessageBatchAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the DeleteMessageBatch operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - deleteMessageBatchAsync
```
public Future<DeleteMessageBatchResult> deleteMessageBatchAsync(String queueUrl,
                                                                List<DeleteMessageBatchRequestEntry> entries)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the DeleteMessageBatch operation.
    
    Specified by:
    
    deleteMessageBatchAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.deleteMessageBatchAsync(DeleteMessageBatchRequest)
  - deleteMessageBatchAsync
```
public Future<DeleteMessageBatchResult> deleteMessageBatchAsync(String queueUrl,
                                                                List<DeleteMessageBatchRequestEntry> entries,
                                                                AsyncHandler<DeleteMessageBatchRequest,DeleteMessageBatchResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the DeleteMessageBatch operation with an AsyncHandler.
    
    Specified by:
    
    deleteMessageBatchAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.deleteMessageBatchAsync(DeleteMessageBatchRequest, com.amazonaws.handlers.AsyncHandler)
  - createQueueAsync
```
public Future<CreateQueueResult> createQueueAsync(CreateQueueRequest createQueueRequest,
                                                  AsyncHandler<CreateQueueRequest,CreateQueueResult> asyncHandler)
                                           throws AmazonServiceException,
                                                  AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Creates a new standard or FIFO queue. You can pass one or more attributes in the request. Keep the following in mind:
    - If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
      
      You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
    - If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
    - If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
    
    After you create a queue, you must wait at least one second after the queue is created to be able to use the queue.
    
    To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:
    - If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
    - If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    createQueueAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the CreateQueue operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - createQueueAsync
```
public Future<CreateQueueResult> createQueueAsync(String queueName)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the CreateQueue operation.
    
    Specified by:
    
    createQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.createQueueAsync(CreateQueueRequest)
  - createQueueAsync
```
public Future<CreateQueueResult> createQueueAsync(String queueName,
                                                  AsyncHandler<CreateQueueRequest,CreateQueueResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the CreateQueue operation with an AsyncHandler.
    
    Specified by:
    
    createQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.createQueueAsync(CreateQueueRequest, com.amazonaws.handlers.AsyncHandler)
  - addPermissionAsync
```
public Future<AddPermissionResult> addPermissionAsync(AddPermissionRequest addPermissionRequest,
                                                      AsyncHandler<AddPermissionRequest,AddPermissionResult> asyncHandler)
                                               throws AmazonServiceException,
                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Adds a permission to a queue for a specific principal. This allows sharing access to the queue.
    
    When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Allow Developers to Write Messages to a Shared Queue in the Amazon SQS Developer Guide.
    AddPermission generates a policy for you. You can use SetQueueAttributes to upload your policy. For more information, see Using Custom Policies with the Amazon SQS Access Policy Language in the Amazon SQS Developer Guide.
    
    An Amazon SQS policy can have a maximum of seven actions per statement.
    
    To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.
    
    Amazon SQS AddPermission does not support adding a non-account principal.
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    addPermissionAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the AddPermission operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - listDeadLetterSourceQueues
```
public ListDeadLetterSourceQueuesResult listDeadLetterSourceQueues(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)
                                                            throws AmazonServiceException,
                                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead-letter queue.
    
    The ListDeadLetterSourceQueues methods supports pagination. Set parameter MaxResults in the request to specify the maximum number of results to be returned in the response. If you do not set MaxResults, the response includes a maximum of 1,000 results. If you set MaxResults and there are additional results to display, the response includes a value for NextToken. Use NextToken as a parameter in your next request to ListDeadLetterSourceQueues to receive the next page of results.
    
    For more information about using dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listDeadLetterSourceQueues in interface AmazonSQS
    
    Returns:
    
    Result of the ListDeadLetterSourceQueues operation returned by the service.
    
    Throws:
    
    QueueDoesNotExistException - The specified queue doesn't exist.
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - listDeadLetterSourceQueuesAsync
```
public Future<ListDeadLetterSourceQueuesResult> listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)
                                                                         throws AmazonServiceException,
                                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead-letter queue.
    
    The ListDeadLetterSourceQueues methods supports pagination. Set parameter MaxResults in the request to specify the maximum number of results to be returned in the response. If you do not set MaxResults, the response includes a maximum of 1,000 results. If you set MaxResults and there are additional results to display, the response includes a value for NextToken. Use NextToken as a parameter in your next request to ListDeadLetterSourceQueues to receive the next page of results.
    
    For more information about using dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listDeadLetterSourceQueuesAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the ListDeadLetterSourceQueues operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - listDeadLetterSourceQueuesAsync
```
public Future<ListDeadLetterSourceQueuesResult> listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest,
                                                                                AsyncHandler<ListDeadLetterSourceQueuesRequest,ListDeadLetterSourceQueuesResult> asyncHandler)
                                                                         throws AmazonServiceException,
                                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead-letter queue.
    
    The ListDeadLetterSourceQueues methods supports pagination. Set parameter MaxResults in the request to specify the maximum number of results to be returned in the response. If you do not set MaxResults, the response includes a maximum of 1,000 results. If you set MaxResults and there are additional results to display, the response includes a value for NextToken. Use NextToken as a parameter in your next request to ListDeadLetterSourceQueues to receive the next page of results.
    
    For more information about using dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listDeadLetterSourceQueuesAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListDeadLetterSourceQueues operation returned by the service.
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AWS API Documentation
  - setQueueAttributes
```
public SetQueueAttributesResult setQueueAttributes(String queueUrl,
                                                   Map<String,String> attributes)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the SetQueueAttributes operation.
    
    Specified by:
    
    setQueueAttributes in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.setQueueAttributes(SetQueueAttributesRequest)
  - changeMessageVisibilityBatch
```
public ChangeMessageVisibilityBatchResult changeMessageVisibilityBatch(String queueUrl,
                                                                       List<ChangeMessageVisibilityBatchRequestEntry> entries)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the ChangeMessageVisibilityBatch operation.
    
    Specified by:
    
    changeMessageVisibilityBatch in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.changeMessageVisibilityBatch(ChangeMessageVisibilityBatchRequest)
  - changeMessageVisibility
```
public ChangeMessageVisibilityResult changeMessageVisibility(String queueUrl,
                                                             String receiptHandle,
                                                             Integer visibilityTimeout)
                                                      throws AmazonServiceException,
                                                             AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the ChangeMessageVisibility operation.
    
    Specified by:
    
    changeMessageVisibility in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.changeMessageVisibility(ChangeMessageVisibilityRequest)
  - getQueueUrl
```
public GetQueueUrlResult getQueueUrl(String queueName)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the GetQueueUrl operation.
    
    Specified by:
    
    getQueueUrl in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.getQueueUrl(GetQueueUrlRequest)
  - removePermission
```
public RemovePermissionResult removePermission(String queueUrl,
                                               String label)
                                        throws AmazonServiceException,
                                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the RemovePermission operation.
    
    Specified by:
    
    removePermission in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.removePermission(RemovePermissionRequest)
  - sendMessageBatch
```
public SendMessageBatchResult sendMessageBatch(String queueUrl,
                                               List<SendMessageBatchRequestEntry> entries)
                                        throws AmazonServiceException,
                                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the SendMessageBatch operation.
    
    Specified by:
    
    sendMessageBatch in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.sendMessageBatch(SendMessageBatchRequest)
  - deleteQueue
```
public DeleteQueueResult deleteQueue(String queueUrl)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the DeleteQueue operation.
    
    Specified by:
    
    deleteQueue in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.deleteQueue(DeleteQueueRequest)
  - sendMessage
```
public SendMessageResult sendMessage(String queueUrl,
                                     String messageBody)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the SendMessage operation.
    
    Specified by:
    
    sendMessage in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.sendMessage(SendMessageRequest)
  - receiveMessage
```
public ReceiveMessageResult receiveMessage(String queueUrl)
                                    throws AmazonServiceException,
                                           AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the ReceiveMessage operation.
    
    Specified by:
    
    receiveMessage in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.receiveMessage(ReceiveMessageRequest)
  - listQueues
```
public ListQueuesResult listQueues(String queueNamePrefix)
                            throws AmazonServiceException,
                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the ListQueues operation.
    
    Specified by:
    
    listQueues in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.listQueues(ListQueuesRequest)
  - deleteMessageBatch
```
public DeleteMessageBatchResult deleteMessageBatch(String queueUrl,
                                                   List<DeleteMessageBatchRequestEntry> entries)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the DeleteMessageBatch operation.
    
    Specified by:
    
    deleteMessageBatch in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.deleteMessageBatch(DeleteMessageBatchRequest)
  - createQueue
```
public CreateQueueResult createQueue(String queueName)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the CreateQueue operation.
    
    Specified by:
    
    createQueue in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.createQueue(CreateQueueRequest)
  - addPermission
```
public AddPermissionResult addPermission(String queueUrl,
                                         String label,
                                         List<String> aWSAccountIds,
                                         List<String> actions)
                                  throws AmazonServiceException,
                                         AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the AddPermission operation.
    
    Specified by:
    
    addPermission in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.addPermission(AddPermissionRequest)
  - deleteMessage
```
public DeleteMessageResult deleteMessage(String queueUrl,
                                         String receiptHandle)
                                  throws AmazonServiceException,
                                         AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the DeleteMessage operation.
    
    Specified by:
    
    deleteMessage in interface AmazonSQS
    
    Throws:
    
    AmazonServiceException
    
    AmazonClientException
    
    See Also:
    
    AmazonSQS.deleteMessage(DeleteMessageRequest)
  - getQueueAttributes
```
public GetQueueAttributesResult getQueueAttributes(String queueUrl,
                                                   List<String> attributeNames)
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the GetQueueAttributes operation.
    
    Specified by:
    
    getQueueAttributes in interface AmazonSQS
    
    See Also:
    
    AmazonSQS.getQueueAttributes(GetQueueAttributesRequest)
  - tagQueue
```
public TagQueueResult tagQueue(TagQueueRequest tagQueueRequest)
```
    Description copied from interface: AmazonSQS
    Add cost allocation tags to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    When you use queue tags, keep the following guidelines in mind:
    - Adding more than 50 tags to a queue isn't recommended.
    - Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
    - Tags are case-sensitive.
    - A new tag with a key identical to that of an existing tag overwrites the existing tag.
    For a full list of tag restrictions, see Quotas related to queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    tagQueue in interface AmazonSQS
    
    Returns:
    
    Result of the TagQueue operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - tagQueue
```
public TagQueueResult tagQueue(String queueUrl,
                               Map<String,String> tags)
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the TagQueue operation.
    
    Specified by:
    
    tagQueue in interface AmazonSQS
    
    See Also:
    
    AmazonSQS.tagQueue(TagQueueRequest)
  - tagQueueAsync
```
public Future<TagQueueResult> tagQueueAsync(TagQueueRequest tagQueueRequest)
```
    Description copied from interface: AmazonSQSAsync
    Add cost allocation tags to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    When you use queue tags, keep the following guidelines in mind:
    - Adding more than 50 tags to a queue isn't recommended.
    - Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
    - Tags are case-sensitive.
    - A new tag with a key identical to that of an existing tag overwrites the existing tag.
    For a full list of tag restrictions, see Quotas related to queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    tagQueueAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the TagQueue operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - tagQueueAsync
```
public Future<TagQueueResult> tagQueueAsync(TagQueueRequest tagQueueRequest,
                                            AsyncHandler<TagQueueRequest,TagQueueResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    Add cost allocation tags to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    When you use queue tags, keep the following guidelines in mind:
    - Adding more than 50 tags to a queue isn't recommended.
    - Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
    - Tags are case-sensitive.
    - A new tag with a key identical to that of an existing tag overwrites the existing tag.
    For a full list of tag restrictions, see Quotas related to queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    Specified by:
    
    tagQueueAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the TagQueue operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - tagQueueAsync
```
public Future<TagQueueResult> tagQueueAsync(String queueUrl,
                                            Map<String,String> tags)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the TagQueue operation.
    
    Specified by:
    
    tagQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.tagQueueAsync(TagQueueRequest)
  - tagQueueAsync
```
public Future<TagQueueResult> tagQueueAsync(String queueUrl,
                                            Map<String,String> tags,
                                            AsyncHandler<TagQueueRequest,TagQueueResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the TagQueue operation with an AsyncHandler.
    
    Specified by:
    
    tagQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.tagQueueAsync(TagQueueRequest, com.amazonaws.handlers.AsyncHandler)
  - untagQueue
```
public UntagQueueResult untagQueue(UntagQueueRequest untagQueueRequest)
```
    Description copied from interface: AmazonSQS
    
    Remove cost allocation tags from the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    untagQueue in interface AmazonSQS
    
    Returns:
    
    Result of the UntagQueue operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - untagQueue
```
public UntagQueueResult untagQueue(String queueUrl,
                                   List<String> tagKeys)
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the UntagQueue operation.
    
    Specified by:
    
    untagQueue in interface AmazonSQS
    
    See Also:
    
    AmazonSQS.untagQueue(UntagQueueRequest)
  - untagQueueAsync
```
public Future<UntagQueueResult> untagQueueAsync(UntagQueueRequest untagQueueRequest)
```
    Description copied from interface: AmazonSQSAsync
    
    Remove cost allocation tags from the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    untagQueueAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the UntagQueue operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - untagQueueAsync
```
public Future<UntagQueueResult> untagQueueAsync(UntagQueueRequest untagQueueRequest,
                                                AsyncHandler<UntagQueueRequest,UntagQueueResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Remove cost allocation tags from the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    untagQueueAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the UntagQueue operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - untagQueueAsync
```
public Future<UntagQueueResult> untagQueueAsync(String queueUrl,
                                                List<String> tagKeys)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the UntagQueue operation.
    
    Specified by:
    
    untagQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.untagQueueAsync(UntagQueueRequest)
  - untagQueueAsync
```
public Future<UntagQueueResult> untagQueueAsync(String queueUrl,
                                                List<String> tagKeys,
                                                AsyncHandler<UntagQueueRequest,UntagQueueResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the UntagQueue operation with an AsyncHandler.
    
    Specified by:
    
    untagQueueAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.untagQueueAsync(UntagQueueRequest, com.amazonaws.handlers.AsyncHandler)
  - listQueueTags
```
public ListQueueTagsResult listQueueTags(ListQueueTagsRequest listQueueTagsRequest)
```
    Description copied from interface: AmazonSQS
    
    List all cost allocation tags added to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listQueueTags in interface AmazonSQS
    
    Returns:
    
    Result of the ListQueueTags operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listQueueTags
```
public ListQueueTagsResult listQueueTags(String queueUrl)
```
    Description copied from interface: AmazonSQS
    
    Simplified method form for invoking the ListQueueTags operation.
    
    Specified by:
    
    listQueueTags in interface AmazonSQS
    
    See Also:
    
    AmazonSQS.listQueueTags(ListQueueTagsRequest)
  - listQueueTagsAsync
```
public Future<ListQueueTagsResult> listQueueTagsAsync(ListQueueTagsRequest listQueueTagsRequest)
```
    Description copied from interface: AmazonSQSAsync
    
    List all cost allocation tags added to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listQueueTagsAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future containing the result of the ListQueueTags operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listQueueTagsAsync
```
public Future<ListQueueTagsResult> listQueueTagsAsync(ListQueueTagsRequest listQueueTagsRequest,
                                                      AsyncHandler<ListQueueTagsRequest,ListQueueTagsResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    List all cost allocation tags added to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon SQS Developer Guide.
    
    Cross-account permissions don't apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listQueueTagsAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an implementation of the callback methods in this interface to receive notification of successful or unsuccessful completion of the operation.
    
    Returns:
    
    A Java Future containing the result of the ListQueueTags operation returned by the service.
    
    See Also:
    
    AWS API Documentation
  - listQueueTagsAsync
```
public Future<ListQueueTagsResult> listQueueTagsAsync(String queueUrl)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ListQueueTags operation.
    
    Specified by:
    
    listQueueTagsAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.listQueueTagsAsync(ListQueueTagsRequest)
  - listQueueTagsAsync
```
public Future<ListQueueTagsResult> listQueueTagsAsync(String queueUrl,
                                                      AsyncHandler<ListQueueTagsRequest,ListQueueTagsResult> asyncHandler)
```
    Description copied from interface: AmazonSQSAsync
    
    Simplified method form for invoking the ListQueueTags operation with an AsyncHandler.
    
    Specified by:
    
    listQueueTagsAsync in interface AmazonSQSAsync
    
    See Also:
    
    AmazonSQSAsync.listQueueTagsAsync(ListQueueTagsRequest, com.amazonaws.handlers.AsyncHandler)

AWS SDK for Java 1.x API Reference - 1.12.560

Class AmazonSQSBufferedAsyncClient

Field Summary

Fields inherited from interface com.amazonaws.services.sqs.AmazonSQS

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

USER_AGENT

Constructor Detail

AmazonSQSBufferedAsyncClient

AmazonSQSBufferedAsyncClient

Method Detail

setRegion

setQueueAttributes

changeMessageVisibilityBatch

changeMessageVisibility

sendMessageBatch

sendMessage

receiveMessage

deleteMessageBatch

deleteMessage

shutdown

flush

changeMessageVisibilityBatchAsync

changeMessageVisibilityAsync

sendMessageBatchAsync

sendMessageAsync

receiveMessageAsync

deleteMessageBatchAsync

setEndpoint

setQueueAttributesAsync

getQueueUrlAsync

removePermissionAsync

getQueueUrl

removePermission

getQueueAttributesAsync

getQueueAttributes

purgeQueueAsync

purgeQueue

deleteQueueAsync

deleteQueue

listQueuesAsync

listQueues

createQueueAsync

createQueue

addPermissionAsync

addPermissionAsync

addPermissionAsync

addPermission

listQueues

getCachedResponseMetadata

deleteMessageAsync

changeMessageVisibilityAsync

changeMessageVisibilityAsync

changeMessageVisibilityAsync

sendMessageAsync

sendMessageAsync

sendMessageAsync

receiveMessageAsync

receiveMessageAsync

receiveMessageAsync

deleteMessageAsync

deleteMessageAsync

deleteMessageAsync

setQueueAttributesAsync

setQueueAttributesAsync

setQueueAttributesAsync

startMessageMoveTask

startMessageMoveTaskAsync

startMessageMoveTaskAsync

cancelMessageMoveTask

cancelMessageMoveTaskAsync

cancelMessageMoveTaskAsync

listMessageMoveTasks

listMessageMoveTasksAsync

listMessageMoveTasksAsync

changeMessageVisibilityBatchAsync

changeMessageVisibilityBatchAsync

changeMessageVisibilityBatchAsync