CfnRule

class aws_cdk.aws_events.CfnRule(scope, id, *, description=None, event_bus_name=None, event_pattern=None, name=None, role_arn=None, schedule_expression=None, state=None, targets=None)

Bases: CfnResource

Creates or updates the specified rule.

Rules are enabled by default, or based on value of the state. You can disable a rule using DisableRule .

A single rule watches for events from a single event bus. Events generated by AWS services go to your account’s default event bus. Events generated by SaaS partner services or applications go to the matching partner event bus. If you have custom applications or services, you can specify whether their events go to your default event bus or a custom event bus that you have created. For more information, see CreateEventBus .

If you are updating an existing rule, the rule is replaced with what you specify in this PutRule command. If you omit arguments in PutRule , the old values for those arguments are not kept. Instead, they are replaced with null values.

When you create or update a rule, incoming events might not immediately start matching to new or updated rules. Allow a short period of time for changes to take effect.

A rule must contain at least an EventPattern or ScheduleExpression. Rules with EventPatterns are triggered when a matching event is observed. Rules with ScheduleExpressions self-trigger based on the given schedule. A rule can have both an EventPattern and a ScheduleExpression, in which case the rule triggers on matching events as well as on a schedule.

Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.

In EventBridge, it is possible to create rules that lead to infinite loops, where a rule is fired repeatedly. For example, a rule might detect that ACLs have changed on an S3 bucket, and trigger software to change them to the desired state. If the rule is not written carefully, the subsequent change to the ACLs fires the rule again, creating an infinite loop.

To prevent this, write the rules so that the triggered actions do not re-fire the same rule. For example, your rule could fire only if ACLs are found to be in a bad state, instead of after any change.

An infinite loop can quickly cause higher than expected charges. We recommend that you use budgeting, which alerts you when charges exceed your specified limit. For more information, see Managing Your Costs with Budgets . .. epigraph:

As an aid to help you jumpstart developing CloudFormation templates, the EventBridge console enables you to create templates from the existing rules in your account. For more information, see `Generating CloudFormation templates from an EventBridge rule <https://docs.aws.amazon.com/eventbridge/latest/userguide/rule-generate-template.html>`_ in the *Amazon EventBridge User Guide* .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-events-rule.html
CloudformationResource:: AWS::Events::Rule
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

# event_pattern: Any

cfn_rule = events.CfnRule(self, "MyCfnRule",
    description="description",
    event_bus_name="eventBusName",
    event_pattern=event_pattern,
    name="name",
    role_arn="roleArn",
    schedule_expression="scheduleExpression",
    state="state",
    targets=[events.CfnRule.TargetProperty(
        arn="arn",
        id="id",

        # the properties below are optional
        app_sync_parameters=events.CfnRule.AppSyncParametersProperty(
            graph_ql_operation="graphQlOperation"
        ),
        batch_parameters=events.CfnRule.BatchParametersProperty(
            job_definition="jobDefinition",
            job_name="jobName",

            # the properties below are optional
            array_properties=events.CfnRule.BatchArrayPropertiesProperty(
                size=123
            ),
            retry_strategy=events.CfnRule.BatchRetryStrategyProperty(
                attempts=123
            )
        ),
        dead_letter_config=events.CfnRule.DeadLetterConfigProperty(
            arn="arn"
        ),
        ecs_parameters=events.CfnRule.EcsParametersProperty(
            task_definition_arn="taskDefinitionArn",

            # the properties below are optional
            capacity_provider_strategy=[events.CfnRule.CapacityProviderStrategyItemProperty(
                capacity_provider="capacityProvider",

                # the properties below are optional
                base=123,
                weight=123
            )],
            enable_ecs_managed_tags=False,
            enable_execute_command=False,
            group="group",
            launch_type="launchType",
            network_configuration=events.CfnRule.NetworkConfigurationProperty(
                aws_vpc_configuration=events.CfnRule.AwsVpcConfigurationProperty(
                    subnets=["subnets"],

                    # the properties below are optional
                    assign_public_ip="assignPublicIp",
                    security_groups=["securityGroups"]
                )
            ),
            placement_constraints=[events.CfnRule.PlacementConstraintProperty(
                expression="expression",
                type="type"
            )],
            placement_strategies=[events.CfnRule.PlacementStrategyProperty(
                field="field",
                type="type"
            )],
            platform_version="platformVersion",
            propagate_tags="propagateTags",
            reference_id="referenceId",
            tag_list=[CfnTag(
                key="key",
                value="value"
            )],
            task_count=123
        ),
        http_parameters=events.CfnRule.HttpParametersProperty(
            header_parameters={
                "header_parameters_key": "headerParameters"
            },
            path_parameter_values=["pathParameterValues"],
            query_string_parameters={
                "query_string_parameters_key": "queryStringParameters"
            }
        ),
        input="input",
        input_path="inputPath",
        input_transformer=events.CfnRule.InputTransformerProperty(
            input_template="inputTemplate",

            # the properties below are optional
            input_paths_map={
                "input_paths_map_key": "inputPathsMap"
            }
        ),
        kinesis_parameters=events.CfnRule.KinesisParametersProperty(
            partition_key_path="partitionKeyPath"
        ),
        redshift_data_parameters=events.CfnRule.RedshiftDataParametersProperty(
            database="database",

            # the properties below are optional
            db_user="dbUser",
            secret_manager_arn="secretManagerArn",
            sql="sql",
            sqls=["sqls"],
            statement_name="statementName",
            with_event=False
        ),
        retry_policy=events.CfnRule.RetryPolicyProperty(
            maximum_event_age_in_seconds=123,
            maximum_retry_attempts=123
        ),
        role_arn="roleArn",
        run_command_parameters=events.CfnRule.RunCommandParametersProperty(
            run_command_targets=[events.CfnRule.RunCommandTargetProperty(
                key="key",
                values=["values"]
            )]
        ),
        sage_maker_pipeline_parameters=events.CfnRule.SageMakerPipelineParametersProperty(
            pipeline_parameter_list=[events.CfnRule.SageMakerPipelineParameterProperty(
                name="name",
                value="value"
            )]
        ),
        sqs_parameters=events.CfnRule.SqsParametersProperty(
            message_group_id="messageGroupId"
        )
    )]
)

Parameters:

scope (Construct) – Scope in which this resource is defined.
id (str) – Construct identifier for this resource (unique in its scope).
description (Optional[str]) – The description of the rule.
event_bus_name (Optional[str]) – The name or ARN of the event bus associated with the rule. If you omit this, the default event bus is used.
event_pattern (Any) – The event pattern of the rule. For more information, see Events and Event Patterns in the Amazon EventBridge User Guide .
name (Optional[str]) – The name of the rule.
role_arn (Optional[str]) – The Amazon Resource Name (ARN) of the role that is used for target invocation. If you’re setting an event bus in another account as the target and that account granted permission to your account through an organization instead of directly by the account ID, you must specify a RoleArn with proper permissions in the Target structure, instead of here in this parameter.
schedule_expression (Optional[str]) – The scheduling expression. For example, “cron(0 20 * * ? *)”, “rate(5 minutes)”. For more information, see Creating an Amazon EventBridge rule that runs on a schedule .
state (Optional[str]) – The state of the rule. Valid values include: - DISABLED : The rule is disabled. EventBridge does not match any events against the rule. - ENABLED : The rule is enabled. EventBridge matches events against the rule, except for AWS management events delivered through CloudTrail. - ENABLED_WITH_ALL_CLOUDTRAIL_MANAGEMENT_EVENTS : The rule is enabled for all events, including AWS management events delivered through CloudTrail. Management events provide visibility into management operations that are performed on resources in your AWS account. These are also known as control plane operations. For more information, see Logging management events in the CloudTrail User Guide , and Filtering management events from AWS services in the Amazon EventBridge User Guide . This value is only valid for rules on the default event bus or custom event buses . It does not apply to partner event buses .
targets (Union[IResolvable, Sequence[Union[IResolvable, TargetProperty, Dict[str, Any]]], None]) – Adds the specified targets to the specified rule, or updates the targets if they are already associated with the rule. Targets are the resources that are invoked when a rule is triggered. The maximum number of entries per request is 10. .. epigraph:: Each rule can have up to five (5) targets associated with it at one time. For a list of services you can configure as targets for events, see EventBridge targets in the Amazon EventBridge User Guide . Creating rules with built-in targets is supported only in the AWS Management Console . The built-in targets are: - Amazon EBS CreateSnapshot API call - Amazon EC2 RebootInstances API call - Amazon EC2 StopInstances API call - Amazon EC2 TerminateInstances API call For some target types, PutTargets provides target-specific parameters. If the target is a Kinesis data stream, you can optionally specify which shard the event goes to by using the KinesisParameters argument. To invoke a command on multiple EC2 instances with one rule, you can use the RunCommandParameters field. To be able to make API calls against the resources that you own, Amazon EventBridge needs the appropriate permissions: - For AWS Lambda and Amazon SNS resources, EventBridge relies on resource-based policies. - For EC2 instances, Kinesis Data Streams, AWS Step Functions state machines and API Gateway APIs, EventBridge relies on IAM roles that you specify in the RoleARN argument in PutTargets . For more information, see Authentication and Access Control in the Amazon EventBridge User Guide . If another AWS account is in the same region and has granted you permission (using PutPermission ), you can send events to that account. Set that account’s event bus as a target of the rules in your account. To send the matched events to the other account, specify that account’s event bus as the Arn value when you run PutTargets . If your account sends events to another account, your account is charged for each sent event. Each event sent to another account is charged as a custom event. The account receiving the event is not charged. For more information, see Amazon EventBridge Pricing . .. epigraph:: Input , InputPath , and InputTransformer are not available with PutTarget if the target is an event bus of a different AWS account. If you are setting the event bus of another account as the target, and that account granted permission to your account through an organization instead of directly by the account ID, then you must specify a RoleArn with proper permissions in the Target structure. For more information, see Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide . .. epigraph:: If you have an IAM role on a cross-account event bus target, a PutTargets call without a role on the same target (same Id and Arn ) will not remove the role. For more information about enabling cross-account events, see PutPermission . Input , InputPath , and InputTransformer are mutually exclusive and optional parameters of a target. When a rule is triggered due to a matched event: - If none of the following arguments are specified for a target, then the entire event is passed to the target in JSON format (unless the target is Amazon EC2 Run Command or Amazon ECS task, in which case nothing from the event is passed to the target). - If Input is specified in the form of valid JSON, then the matched event is overridden with this constant. - If InputPath is specified in the form of JSONPath (for example, $.detail ), then only the part of the event specified in the path is passed to the target (for example, only the detail part of the event is passed). - If InputTransformer is specified, then one or more specified JSONPaths are extracted from the event and used as values in a template that you specify as the input to the target. When you specify InputPath or InputTransformer , you must use JSON dot notation, not bracket notation. When you add targets to a rule and the associated rule triggers soon after, new or updated targets might not be immediately invoked. Allow a short period of time for changes to take effect. This action can partially fail if too many requests are made at the same time. If that happens, FailedEntryCount is non-zero in the response and each entry in FailedEntries provides the ID of the failed target and the error code.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:: path (str) – The path of the value to delete.
Return type:: None

add_dependency(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_depends_on(target)

(deprecated) Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

Parameters:

target (CfnResource) –

Deprecated:

use addDependency

Stability:

deprecated

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:

key (str) –
value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
  "GlobalSecondaryIndexes": [
    {
      "Projection": {
        "NonKeyAttributes": [ "myattribute" ]
        ...
      }
      ...
    },
    {
      "ProjectionType": "INCLUDE"
      ...
    },
  ]
  ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:: property_path (str) – The path to the property.
Return type:: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:

property_path (str) – The path of the property.
value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:

Parameters:

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resource, please consult that specific resource’s documentation.

See:

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options

Return type:

None

get_att(attribute_name, type_hint=None)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:

attribute_name (str) – The name of the attribute.
type_hint (Optional[ResolutionTypeHint]) –

Return type:

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:: inspector (TreeInspector) – tree inspector to collect and process attributes.
Return type:: None

obtain_dependencies()

Retrieves an array of resources this resource depends on.

This assembles dependencies on resources across stacks (including nested stacks) automatically.

Return type:: List[Union[Stack, CfnResource]]

obtain_resource_dependencies()

Get a shallow copy of dependencies between this resource and other resources in the same stack.

Return type:: List[CfnResource]

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:: new_logical_id (str) – The new logical ID to use for this stack element.
Return type:: None

remove_dependency(target)

Indicates that this resource no longer depends on another resource.

This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

replace_dependency(target, new_target)

Replaces one dependency with another.

Parameters:

target (CfnResource) – The dependency to replace.
new_target (CfnResource) – The new dependency to add.

Return type:

None

to_string()

Returns a string representation of this construct.

Return type:: str
Returns:: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::Events::Rule'

attr_arn

The ARN of the rule, such as arn:aws:events:us-east-2:123456789012:rule/example .

CloudformationAttribute:: Arn

cfn_options: Options for this resource, such as condition, update policy etc.

cfn_resource_type: AWS resource type.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

description: The description of the rule.

event_bus_name: The name or ARN of the event bus associated with the rule.

event_pattern: The event pattern of the rule.

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

name: The name of the rule.

node: The tree node.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

role_arn: The Amazon Resource Name (ARN) of the role that is used for target invocation.

schedule_expression: The scheduling expression.

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

state: The state of the rule.

targets: Adds the specified targets to the specified rule, or updates the targets if they are already associated with the rule.

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(x)

Check whether the given object is a CfnResource.

Parameters:

x (Any) –

Return type:

bool

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:: x (Any) – Any object.
Return type:: bool
Returns:: true if x is an object created from a class which extends Construct.

AppSyncParametersProperty

class CfnRule.AppSyncParametersProperty(*, graph_ql_operation)

Bases: object

Contains the GraphQL operation to be parsed and executed, if the event target is an AWS AppSync API.

Parameters:: graph_ql_operation (str) – The GraphQL operation; that is, the query, mutation, or subscription to be parsed and executed by the GraphQL service. For more information, see Operations in the AWS AppSync User Guide .
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-appsyncparameters.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

app_sync_parameters_property = events.CfnRule.AppSyncParametersProperty(
    graph_ql_operation="graphQlOperation"
)

Attributes

graph_ql_operation

The GraphQL operation; that is, the query, mutation, or subscription to be parsed and executed by the GraphQL service.

For more information, see Operations in the AWS AppSync User Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-appsyncparameters.html#cfn-events-rule-appsyncparameters-graphqloperation

AwsVpcConfigurationProperty

class CfnRule.AwsVpcConfigurationProperty(*, subnets, assign_public_ip=None, security_groups=None)

Bases: object

This structure specifies the VPC subnets and security groups for the task, and whether a public IP address is to be used.

This structure is relevant only for ECS tasks that use the awsvpc network mode.

Parameters:

subnets (Sequence[str]) – Specifies the subnets associated with the task. These subnets must all be in the same VPC. You can specify as many as 16 subnets.
assign_public_ip (Optional[str]) – Specifies whether the task’s elastic network interface receives a public IP address. You can specify ENABLED only when LaunchType in EcsParameters is set to FARGATE .
security_groups (Optional[Sequence[str]]) – Specifies the security groups associated with the task. These security groups must all be in the same VPC. You can specify as many as five security groups. If you do not specify a security group, the default security group for the VPC is used.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-awsvpcconfiguration.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

aws_vpc_configuration_property = events.CfnRule.AwsVpcConfigurationProperty(
    subnets=["subnets"],

    # the properties below are optional
    assign_public_ip="assignPublicIp",
    security_groups=["securityGroups"]
)

Attributes

assign_public_ip

Specifies whether the task’s elastic network interface receives a public IP address.

You can specify ENABLED only when LaunchType in EcsParameters is set to FARGATE .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-awsvpcconfiguration.html#cfn-events-rule-awsvpcconfiguration-assignpublicip

security_groups

Specifies the security groups associated with the task.

These security groups must all be in the same VPC. You can specify as many as five security groups. If you do not specify a security group, the default security group for the VPC is used.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-awsvpcconfiguration.html#cfn-events-rule-awsvpcconfiguration-securitygroups

subnets

Specifies the subnets associated with the task.

These subnets must all be in the same VPC. You can specify as many as 16 subnets.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-awsvpcconfiguration.html#cfn-events-rule-awsvpcconfiguration-subnets

BatchArrayPropertiesProperty

class CfnRule.BatchArrayPropertiesProperty(*, size=None)

Bases: object

The array properties for the submitted job, such as the size of the array.

The array size can be between 2 and 10,000. If you specify array properties for a job, it becomes an array job. This parameter is used only if the target is an AWS Batch job.

Parameters:: size (Union[int, float, None]) – The size of the array, if this is an array batch job. Valid values are integers between 2 and 10,000.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batcharrayproperties.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

batch_array_properties_property = events.CfnRule.BatchArrayPropertiesProperty(
    size=123
)

Attributes

size

The size of the array, if this is an array batch job.

Valid values are integers between 2 and 10,000.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batcharrayproperties.html#cfn-events-rule-batcharrayproperties-size

BatchParametersProperty

class CfnRule.BatchParametersProperty(*, job_definition, job_name, array_properties=None, retry_strategy=None)

Bases: object

The custom parameters to be used when the target is an AWS Batch job.

Parameters:

job_definition (str) – The ARN or name of the job definition to use if the event target is an AWS Batch job. This job definition must already exist.
job_name (str) – The name to use for this execution of the job, if the target is an AWS Batch job.
array_properties (Union[IResolvable, BatchArrayPropertiesProperty, Dict[str, Any], None]) – The array properties for the submitted job, such as the size of the array. The array size can be between 2 and 10,000. If you specify array properties for a job, it becomes an array job. This parameter is used only if the target is an AWS Batch job.
retry_strategy (Union[IResolvable, BatchRetryStrategyProperty, Dict[str, Any], None]) – The retry strategy to use for failed jobs, if the target is an AWS Batch job. The retry strategy is the number of times to retry the failed job execution. Valid values are 1–10. When you specify a retry strategy here, it overrides the retry strategy defined in the job definition.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batchparameters.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

batch_parameters_property = events.CfnRule.BatchParametersProperty(
    job_definition="jobDefinition",
    job_name="jobName",

    # the properties below are optional
    array_properties=events.CfnRule.BatchArrayPropertiesProperty(
        size=123
    ),
    retry_strategy=events.CfnRule.BatchRetryStrategyProperty(
        attempts=123
    )
)

Attributes

array_properties

The array properties for the submitted job, such as the size of the array.

The array size can be between 2 and 10,000. If you specify array properties for a job, it becomes an array job. This parameter is used only if the target is an AWS Batch job.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batchparameters.html#cfn-events-rule-batchparameters-arrayproperties

job_definition

The ARN or name of the job definition to use if the event target is an AWS Batch job.

This job definition must already exist.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batchparameters.html#cfn-events-rule-batchparameters-jobdefinition

job_name

The name to use for this execution of the job, if the target is an AWS Batch job.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batchparameters.html#cfn-events-rule-batchparameters-jobname

retry_strategy

The retry strategy to use for failed jobs, if the target is an AWS Batch job.

The retry strategy is the number of times to retry the failed job execution. Valid values are 1–10. When you specify a retry strategy here, it overrides the retry strategy defined in the job definition.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batchparameters.html#cfn-events-rule-batchparameters-retrystrategy

BatchRetryStrategyProperty

class CfnRule.BatchRetryStrategyProperty(*, attempts=None)

Bases: object

The retry strategy to use for failed jobs, if the target is an AWS Batch job.

If you specify a retry strategy here, it overrides the retry strategy defined in the job definition.

Parameters:: attempts (Union[int, float, None]) – The number of times to attempt to retry, if the job fails. Valid values are 1–10.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batchretrystrategy.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

batch_retry_strategy_property = events.CfnRule.BatchRetryStrategyProperty(
    attempts=123
)

Attributes

attempts

The number of times to attempt to retry, if the job fails.

Valid values are 1–10.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-batchretrystrategy.html#cfn-events-rule-batchretrystrategy-attempts

CapacityProviderStrategyItemProperty

class CfnRule.CapacityProviderStrategyItemProperty(*, capacity_provider, base=None, weight=None)

Bases: object

The details of a capacity provider strategy.

To learn more, see CapacityProviderStrategyItem in the Amazon ECS API Reference.

Parameters:

capacity_provider (str) – The short name of the capacity provider.
base (Union[int, float, None]) – The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.
weight (Union[int, float, None]) – The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider. The weight value is taken into consideration after the base value, if defined, is satisfied.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-capacityproviderstrategyitem.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

capacity_provider_strategy_item_property = events.CfnRule.CapacityProviderStrategyItemProperty(
    capacity_provider="capacityProvider",

    # the properties below are optional
    base=123,
    weight=123
)

Attributes

base

The base value designates how many tasks, at a minimum, to run on the specified capacity provider.

Only one capacity provider in a capacity provider strategy can have a base defined. If no value is specified, the default value of 0 is used.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-capacityproviderstrategyitem.html#cfn-events-rule-capacityproviderstrategyitem-base

capacity_provider

The short name of the capacity provider.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-capacityproviderstrategyitem.html#cfn-events-rule-capacityproviderstrategyitem-capacityprovider

weight

The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.

The weight value is taken into consideration after the base value, if defined, is satisfied.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-capacityproviderstrategyitem.html#cfn-events-rule-capacityproviderstrategyitem-weight

DeadLetterConfigProperty

class CfnRule.DeadLetterConfigProperty(*, arn=None)

Bases: object

Configuration details of the Amazon SQS queue for EventBridge to use as a dead-letter queue (DLQ).

For more information, see Using dead-letter queues to process undelivered events in the EventBridge User Guide .

Parameters:: arn (Optional[str]) – The ARN of the SQS queue specified as the target for the dead-letter queue.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-deadletterconfig.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

dead_letter_config_property = events.CfnRule.DeadLetterConfigProperty(
    arn="arn"
)

Attributes

arn

The ARN of the SQS queue specified as the target for the dead-letter queue.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-deadletterconfig.html#cfn-events-rule-deadletterconfig-arn

EcsParametersProperty

class CfnRule.EcsParametersProperty(*, task_definition_arn, capacity_provider_strategy=None, enable_ecs_managed_tags=None, enable_execute_command=None, group=None, launch_type=None, network_configuration=None, placement_constraints=None, placement_strategies=None, platform_version=None, propagate_tags=None, reference_id=None, tag_list=None, task_count=None)

Bases: object

The custom parameters to be used when the target is an Amazon ECS task.

Parameters:

task_definition_arn (str) – The ARN of the task definition to use if the event target is an Amazon ECS task.
capacity_provider_strategy (Union[IResolvable, Sequence[Union[IResolvable, CapacityProviderStrategyItemProperty, Dict[str, Any]]], None]) – The capacity provider strategy to use for the task. If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.
enable_ecs_managed_tags (Union[bool, IResolvable, None]) – Specifies whether to enable Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
enable_execute_command (Union[bool, IResolvable, None]) – Whether or not to enable the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.
group (Optional[str]) – Specifies an ECS task group for the task. The maximum length is 255 characters.
launch_type (Optional[str]) – Specifies the launch type on which your task is running. The launch type that you specify here must match one of the launch type (compatibilities) of the target task. The FARGATE value is supported only in the Regions where AWS Fargate with Amazon ECS is supported. For more information, see AWS Fargate on Amazon ECS in the Amazon Elastic Container Service Developer Guide .
network_configuration (Union[IResolvable, NetworkConfigurationProperty, Dict[str, Any], None]) – Use this structure if the Amazon ECS task uses the awsvpc network mode. This structure specifies the VPC subnets and security groups associated with the task, and whether a public IP address is to be used. This structure is required if LaunchType is FARGATE because the awsvpc mode is required for Fargate tasks. If you specify NetworkConfiguration when the target ECS task does not use the awsvpc network mode, the task fails.
placement_constraints (Union[IResolvable, Sequence[Union[IResolvable, PlacementConstraintProperty, Dict[str, Any]]], None]) – An array of placement constraint objects to use for the task. You can specify up to 10 constraints per task (including constraints in the task definition and those specified at runtime).
placement_strategies (Union[IResolvable, Sequence[Union[IResolvable, PlacementStrategyProperty, Dict[str, Any]]], None]) – The placement strategy objects to use for the task. You can specify a maximum of five strategy rules per task.
platform_version (Optional[str]) – Specifies the platform version for the task. Specify only the numeric portion of the platform version, such as 1.1.0 . This structure is used only if LaunchType is FARGATE . For more information about valid platform versions, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
propagate_tags (Optional[str]) – Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags are not propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.
reference_id (Optional[str]) – The reference ID to use for the task.
tag_list (Union[IResolvable, Sequence[Union[IResolvable, CfnTag, Dict[str, Any]]], None]) – The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. To learn more, see RunTask in the Amazon ECS API Reference.
task_count (Union[int, float, None]) – The number of tasks to create based on TaskDefinition . The default is 1.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

ecs_parameters_property = events.CfnRule.EcsParametersProperty(
    task_definition_arn="taskDefinitionArn",

    # the properties below are optional
    capacity_provider_strategy=[events.CfnRule.CapacityProviderStrategyItemProperty(
        capacity_provider="capacityProvider",

        # the properties below are optional
        base=123,
        weight=123
    )],
    enable_ecs_managed_tags=False,
    enable_execute_command=False,
    group="group",
    launch_type="launchType",
    network_configuration=events.CfnRule.NetworkConfigurationProperty(
        aws_vpc_configuration=events.CfnRule.AwsVpcConfigurationProperty(
            subnets=["subnets"],

            # the properties below are optional
            assign_public_ip="assignPublicIp",
            security_groups=["securityGroups"]
        )
    ),
    placement_constraints=[events.CfnRule.PlacementConstraintProperty(
        expression="expression",
        type="type"
    )],
    placement_strategies=[events.CfnRule.PlacementStrategyProperty(
        field="field",
        type="type"
    )],
    platform_version="platformVersion",
    propagate_tags="propagateTags",
    reference_id="referenceId",
    tag_list=[CfnTag(
        key="key",
        value="value"
    )],
    task_count=123
)

Attributes

capacity_provider_strategy

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-capacityproviderstrategy

enable_ecs_managed_tags

Specifies whether to enable Amazon ECS managed tags for the task.

For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-enableecsmanagedtags

enable_execute_command

Whether or not to enable the execute command functionality for the containers in this task.

If true, this enables execute command functionality on all containers in the task.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-enableexecutecommand

group

Specifies an ECS task group for the task.

The maximum length is 255 characters.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-group

launch_type

Specifies the launch type on which your task is running.

The launch type that you specify here must match one of the launch type (compatibilities) of the target task. The FARGATE value is supported only in the Regions where AWS Fargate with Amazon ECS is supported. For more information, see AWS Fargate on Amazon ECS in the Amazon Elastic Container Service Developer Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-launchtype

network_configuration

Use this structure if the Amazon ECS task uses the awsvpc network mode.

This structure specifies the VPC subnets and security groups associated with the task, and whether a public IP address is to be used. This structure is required if LaunchType is FARGATE because the awsvpc mode is required for Fargate tasks.

If you specify NetworkConfiguration when the target ECS task does not use the awsvpc network mode, the task fails.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-networkconfiguration

placement_constraints

An array of placement constraint objects to use for the task.

You can specify up to 10 constraints per task (including constraints in the task definition and those specified at runtime).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-placementconstraints

placement_strategies

The placement strategy objects to use for the task.

You can specify a maximum of five strategy rules per task.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-placementstrategies

platform_version

Specifies the platform version for the task.

Specify only the numeric portion of the platform version, such as 1.1.0 .

This structure is used only if LaunchType is FARGATE . For more information about valid platform versions, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-platformversion

propagate_tags

Specifies whether to propagate the tags from the task definition to the task.

If no value is specified, the tags are not propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-propagatetags

reference_id

The reference ID to use for the task.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-referenceid

tag_list

The metadata that you apply to the task to help you categorize and organize them.

Each tag consists of a key and an optional value, both of which you define. To learn more, see RunTask in the Amazon ECS API Reference.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-taglist

task_count

The number of tasks to create based on TaskDefinition .

The default is 1.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-taskcount

task_definition_arn

The ARN of the task definition to use if the event target is an Amazon ECS task.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-ecsparameters.html#cfn-events-rule-ecsparameters-taskdefinitionarn

HttpParametersProperty

class CfnRule.HttpParametersProperty(*, header_parameters=None, path_parameter_values=None, query_string_parameters=None)

Bases: object

These are custom parameter to be used when the target is an API Gateway APIs or EventBridge ApiDestinations.

In the latter case, these are merged with any InvocationParameters specified on the Connection, with any values from the Connection taking precedence.

Parameters:

header_parameters (Union[IResolvable, Mapping[str, str], None]) – The headers that need to be sent as part of request invoking the API Gateway API or EventBridge ApiDestination.
path_parameter_values (Optional[Sequence[str]]) – The path parameter values to be used to populate API Gateway API or EventBridge ApiDestination path wildcards (“*”).
query_string_parameters (Union[IResolvable, Mapping[str, str], None]) – The query string keys/values that need to be sent as part of request invoking the API Gateway API or EventBridge ApiDestination.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-httpparameters.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

http_parameters_property = events.CfnRule.HttpParametersProperty(
    header_parameters={
        "header_parameters_key": "headerParameters"
    },
    path_parameter_values=["pathParameterValues"],
    query_string_parameters={
        "query_string_parameters_key": "queryStringParameters"
    }
)

Attributes

header_parameters

The headers that need to be sent as part of request invoking the API Gateway API or EventBridge ApiDestination.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-httpparameters.html#cfn-events-rule-httpparameters-headerparameters

path_parameter_values

The path parameter values to be used to populate API Gateway API or EventBridge ApiDestination path wildcards (“*”).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-httpparameters.html#cfn-events-rule-httpparameters-pathparametervalues

query_string_parameters

The query string keys/values that need to be sent as part of request invoking the API Gateway API or EventBridge ApiDestination.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-httpparameters.html#cfn-events-rule-httpparameters-querystringparameters

InputTransformerProperty

class CfnRule.InputTransformerProperty(*, input_template, input_paths_map=None)

Bases: object

Contains the parameters needed for you to provide custom input to a target based on one or more pieces of data extracted from the event.

Parameters:

input_template (str) – Input template where you specify placeholders that will be filled with the values of the keys from InputPathsMap to customize the data sent to the target. Enclose each InputPathsMaps value in brackets: < value > If InputTemplate is a JSON object (surrounded by curly braces), the following restrictions apply: - The placeholder cannot be used as an object key. The following example shows the syntax for using InputPathsMap and InputTemplate . "InputTransformer": { "InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"}, "InputTemplate": "<instance> is in state <status>" } To have the InputTemplate include quote marks within a JSON string, escape each quote marks with a slash, as in the following example: "InputTransformer": { "InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"}, "InputTemplate": "<instance> is in state \"<status>\"" } The InputTemplate can also be valid JSON with varibles in quotes or out, as in the following example: "InputTransformer": { "InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"}, "InputTemplate": '{"myInstance": <instance>,"myStatus": "<instance> is in state \"<status>\""}' }
input_paths_map (Union[IResolvable, Mapping[str, str], None]) – Map of JSON paths to be extracted from the event. You can then insert these in the template in InputTemplate to produce the output you want to be sent to the target. InputPathsMap is an array key-value pairs, where each value is a valid JSON path. You can have as many as 100 key-value pairs. You must use JSON dot notation, not bracket notation. The keys cannot start with “ AWS .”

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-inputtransformer.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

input_transformer_property = events.CfnRule.InputTransformerProperty(
    input_template="inputTemplate",

    # the properties below are optional
    input_paths_map={
        "input_paths_map_key": "inputPathsMap"
    }
)

Attributes

input_paths_map

Map of JSON paths to be extracted from the event.

You can then insert these in the template in InputTemplate to produce the output you want to be sent to the target.

InputPathsMap is an array key-value pairs, where each value is a valid JSON path. You can have as many as 100 key-value pairs. You must use JSON dot notation, not bracket notation.

The keys cannot start with “ AWS .”

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-inputtransformer.html#cfn-events-rule-inputtransformer-inputpathsmap

input_template

Input template where you specify placeholders that will be filled with the values of the keys from InputPathsMap to customize the data sent to the target.

Enclose each InputPathsMaps value in brackets: < value >

If InputTemplate is a JSON object (surrounded by curly braces), the following restrictions apply:

The placeholder cannot be used as an object key.

The following example shows the syntax for using InputPathsMap and InputTemplate .

"InputTransformer":

{

"InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"},

"InputTemplate": "<instance> is in state <status>"

}

To have the InputTemplate include quote marks within a JSON string, escape each quote marks with a slash, as in the following example:

"InputTransformer":

{

"InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"},

"InputTemplate": "<instance> is in state \"<status>\""

}

The InputTemplate can also be valid JSON with varibles in quotes or out, as in the following example:

"InputTransformer":

{

"InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"},

"InputTemplate": '{"myInstance": <instance>,"myStatus": "<instance> is in state \"<status>\""}'

}

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-inputtransformer.html#cfn-events-rule-inputtransformer-inputtemplate

KinesisParametersProperty

class CfnRule.KinesisParametersProperty(*, partition_key_path)

Bases: object

This object enables you to specify a JSON path to extract from the event and use as the partition key for the Amazon Kinesis data stream, so that you can control the shard to which the event goes.

If you do not include this parameter, the default is to use the eventId as the partition key.

Parameters:: partition_key_path (str) – The JSON path to be extracted from the event and used as the partition key. For more information, see Amazon Kinesis Streams Key Concepts in the Amazon Kinesis Streams Developer Guide .
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-kinesisparameters.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

kinesis_parameters_property = events.CfnRule.KinesisParametersProperty(
    partition_key_path="partitionKeyPath"
)

Attributes

partition_key_path

The JSON path to be extracted from the event and used as the partition key.

For more information, see Amazon Kinesis Streams Key Concepts in the Amazon Kinesis Streams Developer Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-kinesisparameters.html#cfn-events-rule-kinesisparameters-partitionkeypath

NetworkConfigurationProperty

class CfnRule.NetworkConfigurationProperty(*, aws_vpc_configuration=None)

Bases: object

This structure specifies the network configuration for an ECS task.

Parameters:: aws_vpc_configuration (Union[IResolvable, AwsVpcConfigurationProperty, Dict[str, Any], None]) – Use this structure to specify the VPC subnets and security groups for the task, and whether a public IP address is to be used. This structure is relevant only for ECS tasks that use the awsvpc network mode.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-networkconfiguration.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

network_configuration_property = events.CfnRule.NetworkConfigurationProperty(
    aws_vpc_configuration=events.CfnRule.AwsVpcConfigurationProperty(
        subnets=["subnets"],

        # the properties below are optional
        assign_public_ip="assignPublicIp",
        security_groups=["securityGroups"]
    )
)

Attributes

aws_vpc_configuration

Use this structure to specify the VPC subnets and security groups for the task, and whether a public IP address is to be used.

This structure is relevant only for ECS tasks that use the awsvpc network mode.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-networkconfiguration.html#cfn-events-rule-networkconfiguration-awsvpcconfiguration

PlacementConstraintProperty

class CfnRule.PlacementConstraintProperty(*, expression=None, type=None)

Bases: object

An object representing a constraint on task placement.

To learn more, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.

Parameters:

expression (Optional[str]) – A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . To learn more, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
type (Optional[str]) – The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-placementconstraint.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

placement_constraint_property = events.CfnRule.PlacementConstraintProperty(
    expression="expression",
    type="type"
)

Attributes

expression

A cluster query language expression to apply to the constraint.

You cannot specify an expression if the constraint type is distinctInstance . To learn more, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-placementconstraint.html#cfn-events-rule-placementconstraint-expression

type

The type of constraint.

Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-placementconstraint.html#cfn-events-rule-placementconstraint-type

PlacementStrategyProperty

class CfnRule.PlacementStrategyProperty(*, field=None, type=None)

Bases: object

The task placement strategy for a task or service.

To learn more, see Task Placement Strategies in the Amazon Elastic Container Service Service Developer Guide.

Parameters:

field (Optional[str]) – The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
type (Optional[str]) – The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-placementstrategy.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

placement_strategy_property = events.CfnRule.PlacementStrategyProperty(
    field="field",
    type="type"
)

Attributes

field

The field to apply the placement strategy against.

For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-placementstrategy.html#cfn-events-rule-placementstrategy-field

type

The type of placement strategy.

The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-placementstrategy.html#cfn-events-rule-placementstrategy-type

RedshiftDataParametersProperty

class CfnRule.RedshiftDataParametersProperty(*, database, db_user=None, secret_manager_arn=None, sql=None, sqls=None, statement_name=None, with_event=None)

Bases: object

These are custom parameters to be used when the target is a Amazon Redshift cluster to invoke the Amazon Redshift Data API ExecuteStatement based on EventBridge events.

Parameters:

database (str) – The name of the database. Required when authenticating using temporary credentials.
db_user (Optional[str]) – The database user name. Required when authenticating using temporary credentials.
secret_manager_arn (Optional[str]) – The name or ARN of the secret that enables access to the database. Required when authenticating using AWS Secrets Manager.
sql (Optional[str]) – The SQL statement text to run.
sqls (Optional[Sequence[str]]) – One or more SQL statements to run. The SQL statements are run as a single transaction. They run serially in the order of the array. Subsequent SQL statements don’t start until the previous statement in the array completes. If any SQL statement fails, then because they are run as one transaction, all work is rolled back.
statement_name (Optional[str]) – The name of the SQL statement. You can name the SQL statement when you create it to identify the query.
with_event (Union[bool, IResolvable, None]) – Indicates whether to send an event back to EventBridge after the SQL statement runs.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

redshift_data_parameters_property = events.CfnRule.RedshiftDataParametersProperty(
    database="database",

    # the properties below are optional
    db_user="dbUser",
    secret_manager_arn="secretManagerArn",
    sql="sql",
    sqls=["sqls"],
    statement_name="statementName",
    with_event=False
)

Attributes

database

The name of the database.

Required when authenticating using temporary credentials.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html#cfn-events-rule-redshiftdataparameters-database

db_user

The database user name.

Required when authenticating using temporary credentials.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html#cfn-events-rule-redshiftdataparameters-dbuser

secret_manager_arn

The name or ARN of the secret that enables access to the database.

Required when authenticating using AWS Secrets Manager.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html#cfn-events-rule-redshiftdataparameters-secretmanagerarn

sql

The SQL statement text to run.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html#cfn-events-rule-redshiftdataparameters-sql

sqls

One or more SQL statements to run.

The SQL statements are run as a single transaction. They run serially in the order of the array. Subsequent SQL statements don’t start until the previous statement in the array completes. If any SQL statement fails, then because they are run as one transaction, all work is rolled back.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html#cfn-events-rule-redshiftdataparameters-sqls

statement_name

The name of the SQL statement.

You can name the SQL statement when you create it to identify the query.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html#cfn-events-rule-redshiftdataparameters-statementname

with_event

Indicates whether to send an event back to EventBridge after the SQL statement runs.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-redshiftdataparameters.html#cfn-events-rule-redshiftdataparameters-withevent

RetryPolicyProperty

class CfnRule.RetryPolicyProperty(*, maximum_event_age_in_seconds=None, maximum_retry_attempts=None)

Bases: object

A RetryPolicy object that includes information about the retry policy settings.

Parameters:

maximum_event_age_in_seconds (Union[int, float, None]) – The maximum amount of time, in seconds, to continue to make retry attempts.
maximum_retry_attempts (Union[int, float, None]) – The maximum number of retry attempts to make before the request fails. Retry attempts continue until either the maximum number of attempts is made or until the duration of the MaximumEventAgeInSeconds is met.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-retrypolicy.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

retry_policy_property = events.CfnRule.RetryPolicyProperty(
    maximum_event_age_in_seconds=123,
    maximum_retry_attempts=123
)

Attributes

maximum_event_age_in_seconds

The maximum amount of time, in seconds, to continue to make retry attempts.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-retrypolicy.html#cfn-events-rule-retrypolicy-maximumeventageinseconds

maximum_retry_attempts

The maximum number of retry attempts to make before the request fails.

Retry attempts continue until either the maximum number of attempts is made or until the duration of the MaximumEventAgeInSeconds is met.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-retrypolicy.html#cfn-events-rule-retrypolicy-maximumretryattempts

RunCommandParametersProperty

class CfnRule.RunCommandParametersProperty(*, run_command_targets)

Bases: object

This parameter contains the criteria (either InstanceIds or a tag) used to specify which EC2 instances are to be sent the command.

Parameters:: run_command_targets (Union[IResolvable, Sequence[Union[IResolvable, RunCommandTargetProperty, Dict[str, Any]]]]) – Currently, we support including only one RunCommandTarget block, which specifies either an array of InstanceIds or a tag.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-runcommandparameters.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

run_command_parameters_property = events.CfnRule.RunCommandParametersProperty(
    run_command_targets=[events.CfnRule.RunCommandTargetProperty(
        key="key",
        values=["values"]
    )]
)

Attributes

run_command_targets

Currently, we support including only one RunCommandTarget block, which specifies either an array of InstanceIds or a tag.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-runcommandparameters.html#cfn-events-rule-runcommandparameters-runcommandtargets

RunCommandTargetProperty

class CfnRule.RunCommandTargetProperty(*, key, values)

Bases: object

Information about the EC2 instances that are to be sent the command, specified as key-value pairs.

Each RunCommandTarget block can include only one key, but this key may specify multiple values.

Parameters:

key (str) – Can be either tag: tag-key or InstanceIds .
values (Sequence[str]) – If Key is tag: tag-key , Values is a list of tag values. If Key is InstanceIds , Values is a list of Amazon EC2 instance IDs.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-runcommandtarget.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

run_command_target_property = events.CfnRule.RunCommandTargetProperty(
    key="key",
    values=["values"]
)

Attributes

key

Can be either tag: tag-key or InstanceIds .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-runcommandtarget.html#cfn-events-rule-runcommandtarget-key

values

If Key is tag: tag-key , Values is a list of tag values.

If Key is InstanceIds , Values is a list of Amazon EC2 instance IDs.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-runcommandtarget.html#cfn-events-rule-runcommandtarget-values

SageMakerPipelineParameterProperty

class CfnRule.SageMakerPipelineParameterProperty(*, name, value)

Bases: object

Name/Value pair of a parameter to start execution of a SageMaker Model Building Pipeline.

Parameters:

name (str) – Name of parameter to start execution of a SageMaker Model Building Pipeline.
value (str) – Value of parameter to start execution of a SageMaker Model Building Pipeline.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-sagemakerpipelineparameter.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

sage_maker_pipeline_parameter_property = events.CfnRule.SageMakerPipelineParameterProperty(
    name="name",
    value="value"
)

Attributes

name

Name of parameter to start execution of a SageMaker Model Building Pipeline.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-sagemakerpipelineparameter.html#cfn-events-rule-sagemakerpipelineparameter-name

value

Value of parameter to start execution of a SageMaker Model Building Pipeline.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-sagemakerpipelineparameter.html#cfn-events-rule-sagemakerpipelineparameter-value

SageMakerPipelineParametersProperty

class CfnRule.SageMakerPipelineParametersProperty(*, pipeline_parameter_list=None)

Bases: object

These are custom parameters to use when the target is a SageMaker Model Building Pipeline that starts based on EventBridge events.

Parameters:: pipeline_parameter_list (Union[IResolvable, Sequence[Union[IResolvable, SageMakerPipelineParameterProperty, Dict[str, Any]]], None]) – List of Parameter names and values for SageMaker Model Building Pipeline execution.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-sagemakerpipelineparameters.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

sage_maker_pipeline_parameters_property = events.CfnRule.SageMakerPipelineParametersProperty(
    pipeline_parameter_list=[events.CfnRule.SageMakerPipelineParameterProperty(
        name="name",
        value="value"
    )]
)

Attributes

pipeline_parameter_list

List of Parameter names and values for SageMaker Model Building Pipeline execution.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-sagemakerpipelineparameters.html#cfn-events-rule-sagemakerpipelineparameters-pipelineparameterlist

SqsParametersProperty

class CfnRule.SqsParametersProperty(*, message_group_id)

Bases: object

This structure includes the custom parameter to be used when the target is an SQS FIFO queue.

Parameters:: message_group_id (str) – The FIFO message group ID to use as the target.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-sqsparameters.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

sqs_parameters_property = events.CfnRule.SqsParametersProperty(
    message_group_id="messageGroupId"
)

Attributes

message_group_id

The FIFO message group ID to use as the target.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-sqsparameters.html#cfn-events-rule-sqsparameters-messagegroupid

TagProperty

class CfnRule.TagProperty(*, key=None, value=None)

Bases: object

A key-value pair associated with an ECS Target of an EventBridge rule.

The tag will be propagated to ECS by EventBridge when starting an ECS task based on a matched event. .. epigraph:

Currently, tags are only available when using ECS with EventBridge .

Parameters:

key (Optional[str]) – A string you can use to assign a value. The combination of tag keys and values can help you organize and categorize your resources.
value (Optional[str]) – The value for the specified tag key.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-tag.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

tag_property = events.CfnRule.TagProperty(
    key="key",
    value="value"
)

Attributes

key

A string you can use to assign a value.

The combination of tag keys and values can help you organize and categorize your resources.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-tag.html#cfn-events-rule-tag-key

value

The value for the specified tag key.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-tag.html#cfn-events-rule-tag-value

TargetProperty

class CfnRule.TargetProperty(*, arn, id, app_sync_parameters=None, batch_parameters=None, dead_letter_config=None, ecs_parameters=None, http_parameters=None, input=None, input_path=None, input_transformer=None, kinesis_parameters=None, redshift_data_parameters=None, retry_policy=None, role_arn=None, run_command_parameters=None, sage_maker_pipeline_parameters=None, sqs_parameters=None)

Bases: object

Targets are the resources to be invoked when a rule is triggered.

For a complete list of services and resources that can be set as a target, see PutTargets .

If you are setting the event bus of another account as the target, and that account granted permission to your account through an organization instead of directly by the account ID, then you must specify a RoleArn with proper permissions in the Target structure. For more information, see Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide .

Parameters:

arn (str) – The Amazon Resource Name (ARN) of the target.
id (str) – The ID of the target within the specified rule. Use this ID to reference the target when updating the rule. We recommend using a memorable and unique string.
app_sync_parameters (Union[IResolvable, AppSyncParametersProperty, Dict[str, Any], None]) – Contains the GraphQL operation to be parsed and executed, if the event target is an AWS AppSync API.
batch_parameters (Union[IResolvable, BatchParametersProperty, Dict[str, Any], None]) – If the event target is an AWS Batch job, this contains the job definition, job name, and other parameters. For more information, see Jobs in the AWS Batch User Guide .
dead_letter_config (Union[IResolvable, DeadLetterConfigProperty, Dict[str, Any], None]) – The DeadLetterConfig that defines the target queue to send dead-letter queue events to.
ecs_parameters (Union[IResolvable, EcsParametersProperty, Dict[str, Any], None]) – Contains the Amazon ECS task definition and task count to be used, if the event target is an Amazon ECS task. For more information about Amazon ECS tasks, see Task Definitions in the Amazon EC2 Container Service Developer Guide .
http_parameters (Union[IResolvable, HttpParametersProperty, Dict[str, Any], None]) – Contains the HTTP parameters to use when the target is a API Gateway endpoint or EventBridge ApiDestination. If you specify an API Gateway API or EventBridge ApiDestination as a target, you can use this parameter to specify headers, path parameters, and query string keys/values as part of your target invoking request. If you’re using ApiDestinations, the corresponding Connection can also have these values configured. In case of any conflicting keys, values from the Connection take precedence.
input (Optional[str]) – Valid JSON text passed to the target. In this case, nothing from the event itself is passed to the target. For more information, see The JavaScript Object Notation (JSON) Data Interchange Format .
input_path (Optional[str]) – The value of the JSONPath that is used for extracting part of the matched event when passing it to the target. You may use JSON dot notation or bracket notation. For more information about JSON paths, see JSONPath .
input_transformer (Union[IResolvable, InputTransformerProperty, Dict[str, Any], None]) – Settings to enable you to provide custom input to a target based on certain event data. You can extract one or more key-value pairs from the event and then use that data to send customized input to the target.
kinesis_parameters (Union[IResolvable, KinesisParametersProperty, Dict[str, Any], None]) – The custom parameter you can use to control the shard assignment, when the target is a Kinesis data stream. If you do not include this parameter, the default is to use the eventId as the partition key.
redshift_data_parameters (Union[IResolvable, RedshiftDataParametersProperty, Dict[str, Any], None]) – Contains the Amazon Redshift Data API parameters to use when the target is a Amazon Redshift cluster. If you specify a Amazon Redshift Cluster as a Target, you can use this to specify parameters to invoke the Amazon Redshift Data API ExecuteStatement based on EventBridge events.
retry_policy (Union[IResolvable, RetryPolicyProperty, Dict[str, Any], None]) – The RetryPolicy object that contains the retry policy configuration to use for the dead-letter queue.
role_arn (Optional[str]) – The Amazon Resource Name (ARN) of the IAM role to be used for this target when the rule is triggered. If one rule triggers multiple targets, you can use a different IAM role for each target.
run_command_parameters (Union[IResolvable, RunCommandParametersProperty, Dict[str, Any], None]) – Parameters used when you are using the rule to invoke Amazon EC2 Run Command.
sage_maker_pipeline_parameters (Union[IResolvable, SageMakerPipelineParametersProperty, Dict[str, Any], None]) – Contains the SageMaker Model Building Pipeline parameters to start execution of a SageMaker Model Building Pipeline. If you specify a SageMaker Model Building Pipeline as a target, you can use this to specify parameters to start a pipeline execution based on EventBridge events.
sqs_parameters (Union[IResolvable, SqsParametersProperty, Dict[str, Any], None]) – Contains the message group ID to use when the target is a FIFO queue. If you specify an SQS FIFO queue as a target, the queue must have content-based deduplication enabled.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_events as events

target_property = events.CfnRule.TargetProperty(
    arn="arn",
    id="id",

    # the properties below are optional
    app_sync_parameters=events.CfnRule.AppSyncParametersProperty(
        graph_ql_operation="graphQlOperation"
    ),
    batch_parameters=events.CfnRule.BatchParametersProperty(
        job_definition="jobDefinition",
        job_name="jobName",

        # the properties below are optional
        array_properties=events.CfnRule.BatchArrayPropertiesProperty(
            size=123
        ),
        retry_strategy=events.CfnRule.BatchRetryStrategyProperty(
            attempts=123
        )
    ),
    dead_letter_config=events.CfnRule.DeadLetterConfigProperty(
        arn="arn"
    ),
    ecs_parameters=events.CfnRule.EcsParametersProperty(
        task_definition_arn="taskDefinitionArn",

        # the properties below are optional
        capacity_provider_strategy=[events.CfnRule.CapacityProviderStrategyItemProperty(
            capacity_provider="capacityProvider",

            # the properties below are optional
            base=123,
            weight=123
        )],
        enable_ecs_managed_tags=False,
        enable_execute_command=False,
        group="group",
        launch_type="launchType",
        network_configuration=events.CfnRule.NetworkConfigurationProperty(
            aws_vpc_configuration=events.CfnRule.AwsVpcConfigurationProperty(
                subnets=["subnets"],

                # the properties below are optional
                assign_public_ip="assignPublicIp",
                security_groups=["securityGroups"]
            )
        ),
        placement_constraints=[events.CfnRule.PlacementConstraintProperty(
            expression="expression",
            type="type"
        )],
        placement_strategies=[events.CfnRule.PlacementStrategyProperty(
            field="field",
            type="type"
        )],
        platform_version="platformVersion",
        propagate_tags="propagateTags",
        reference_id="referenceId",
        tag_list=[CfnTag(
            key="key",
            value="value"
        )],
        task_count=123
    ),
    http_parameters=events.CfnRule.HttpParametersProperty(
        header_parameters={
            "header_parameters_key": "headerParameters"
        },
        path_parameter_values=["pathParameterValues"],
        query_string_parameters={
            "query_string_parameters_key": "queryStringParameters"
        }
    ),
    input="input",
    input_path="inputPath",
    input_transformer=events.CfnRule.InputTransformerProperty(
        input_template="inputTemplate",

        # the properties below are optional
        input_paths_map={
            "input_paths_map_key": "inputPathsMap"
        }
    ),
    kinesis_parameters=events.CfnRule.KinesisParametersProperty(
        partition_key_path="partitionKeyPath"
    ),
    redshift_data_parameters=events.CfnRule.RedshiftDataParametersProperty(
        database="database",

        # the properties below are optional
        db_user="dbUser",
        secret_manager_arn="secretManagerArn",
        sql="sql",
        sqls=["sqls"],
        statement_name="statementName",
        with_event=False
    ),
    retry_policy=events.CfnRule.RetryPolicyProperty(
        maximum_event_age_in_seconds=123,
        maximum_retry_attempts=123
    ),
    role_arn="roleArn",
    run_command_parameters=events.CfnRule.RunCommandParametersProperty(
        run_command_targets=[events.CfnRule.RunCommandTargetProperty(
            key="key",
            values=["values"]
        )]
    ),
    sage_maker_pipeline_parameters=events.CfnRule.SageMakerPipelineParametersProperty(
        pipeline_parameter_list=[events.CfnRule.SageMakerPipelineParameterProperty(
            name="name",
            value="value"
        )]
    ),
    sqs_parameters=events.CfnRule.SqsParametersProperty(
        message_group_id="messageGroupId"
    )
)

Attributes

app_sync_parameters

Contains the GraphQL operation to be parsed and executed, if the event target is an AWS AppSync API.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-appsyncparameters

arn

The Amazon Resource Name (ARN) of the target.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-arn

batch_parameters

If the event target is an AWS Batch job, this contains the job definition, job name, and other parameters.

For more information, see Jobs in the AWS Batch User Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-batchparameters

dead_letter_config

The DeadLetterConfig that defines the target queue to send dead-letter queue events to.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-deadletterconfig

ecs_parameters

Contains the Amazon ECS task definition and task count to be used, if the event target is an Amazon ECS task.

For more information about Amazon ECS tasks, see Task Definitions in the Amazon EC2 Container Service Developer Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-ecsparameters

http_parameters

Contains the HTTP parameters to use when the target is a API Gateway endpoint or EventBridge ApiDestination.

If you specify an API Gateway API or EventBridge ApiDestination as a target, you can use this parameter to specify headers, path parameters, and query string keys/values as part of your target invoking request. If you’re using ApiDestinations, the corresponding Connection can also have these values configured. In case of any conflicting keys, values from the Connection take precedence.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-httpparameters

id

The ID of the target within the specified rule.

Use this ID to reference the target when updating the rule. We recommend using a memorable and unique string.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-id

input

Valid JSON text passed to the target.

In this case, nothing from the event itself is passed to the target. For more information, see The JavaScript Object Notation (JSON) Data Interchange Format .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-input

input_path

The value of the JSONPath that is used for extracting part of the matched event when passing it to the target.

You may use JSON dot notation or bracket notation. For more information about JSON paths, see JSONPath .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-inputpath

input_transformer

Settings to enable you to provide custom input to a target based on certain event data.

You can extract one or more key-value pairs from the event and then use that data to send customized input to the target.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-inputtransformer

kinesis_parameters

The custom parameter you can use to control the shard assignment, when the target is a Kinesis data stream.

If you do not include this parameter, the default is to use the eventId as the partition key.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-kinesisparameters

redshift_data_parameters

Contains the Amazon Redshift Data API parameters to use when the target is a Amazon Redshift cluster.

If you specify a Amazon Redshift Cluster as a Target, you can use this to specify parameters to invoke the Amazon Redshift Data API ExecuteStatement based on EventBridge events.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-redshiftdataparameters

retry_policy

The RetryPolicy object that contains the retry policy configuration to use for the dead-letter queue.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-retrypolicy

role_arn

The Amazon Resource Name (ARN) of the IAM role to be used for this target when the rule is triggered.

If one rule triggers multiple targets, you can use a different IAM role for each target.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-rolearn

run_command_parameters

Parameters used when you are using the rule to invoke Amazon EC2 Run Command.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-runcommandparameters

sage_maker_pipeline_parameters

Contains the SageMaker Model Building Pipeline parameters to start execution of a SageMaker Model Building Pipeline.

If you specify a SageMaker Model Building Pipeline as a target, you can use this to specify parameters to start a pipeline execution based on EventBridge events.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-sagemakerpipelineparameters

sqs_parameters

Contains the message group ID to use when the target is a FIFO queue.

If you specify an SQS FIFO queue as a target, the queue must have content-based deduplication enabled.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-events-rule-target.html#cfn-events-rule-target-sqsparameters