Class CodeDeployClient
Client to interact with AWS CodeDeploy
- Guzzle\Common\AbstractHasDispatcher implements Guzzle\Common\HasDispatcherInterface
-
Guzzle\Http\Client implements Guzzle\Http\ClientInterface
-
Guzzle\Service\Client implements Guzzle\Service\ClientInterface
-
Aws\Common\Client\AbstractClient implements Aws\Common\Client\AwsClientInterface
-
Aws\CodeDeploy\CodeDeployClient
Link: User guide
Link: API docs
Located at Aws/CodeDeploy/CodeDeployClient.php
Methods summary
-
public static
factory ( array|Collection $config = array() )
Factory method to create a new AWS CodeDeploy client using an array of configuration options.
-
public
addTagsToOnPremisesInstances ( array $args = array() )
Executes the AddTagsToOnPremisesInstances operation.
-
public
batchGetApplications ( array $args = array() )
Executes the BatchGetApplications operation.
-
public
batchGetDeployments ( array $args = array() )
Executes the BatchGetDeployments operation.
-
public
batchGetOnPremisesInstances ( array $args = array() )
Executes the BatchGetOnPremisesInstances operation.
-
public
createApplication ( array $args = array() )
Executes the CreateApplication operation.
-
public
createDeployment ( array $args = array() )
Executes the CreateDeployment operation.
-
public
createDeploymentConfig ( array $args = array() )
Executes the CreateDeploymentConfig operation.
-
public
createDeploymentGroup ( array $args = array() )
Executes the CreateDeploymentGroup operation.
-
public
deleteApplication ( array $args = array() )
Executes the DeleteApplication operation.
-
public
deleteDeploymentConfig ( array $args = array() )
Executes the DeleteDeploymentConfig operation.
-
public
deleteDeploymentGroup ( array $args = array() )
Executes the DeleteDeploymentGroup operation.
-
public
deregisterOnPremisesInstance ( array $args = array() )
Executes the DeregisterOnPremisesInstance operation.
-
public
getApplication ( array $args = array() )
Executes the GetApplication operation.
-
public
getApplicationRevision ( array $args = array() )
Executes the GetApplicationRevision operation.
-
public
getDeployment ( array $args = array() )
Executes the GetDeployment operation.
-
public
getDeploymentConfig ( array $args = array() )
Executes the GetDeploymentConfig operation.
-
public
getDeploymentGroup ( array $args = array() )
Executes the GetDeploymentGroup operation.
-
public
getDeploymentInstance ( array $args = array() )
Executes the GetDeploymentInstance operation.
-
public
getOnPremisesInstance ( array $args = array() )
Executes the GetOnPremisesInstance operation.
-
public
listApplicationRevisions ( array $args = array() )
Executes the ListApplicationRevisions operation.
-
public
listApplications ( array $args = array() )
Executes the ListApplications operation.
-
public
listDeploymentConfigs ( array $args = array() )
Executes the ListDeploymentConfigs operation.
-
public
listDeploymentGroups ( array $args = array() )
Executes the ListDeploymentGroups operation.
-
public
listDeploymentInstances ( array $args = array() )
Executes the ListDeploymentInstances operation.
-
public
listDeployments ( array $args = array() )
Executes the ListDeployments operation.
-
public
listOnPremisesInstances ( array $args = array() )
Executes the ListOnPremisesInstances operation.
-
public
registerApplicationRevision ( array $args = array() )
Executes the RegisterApplicationRevision operation.
-
public
registerOnPremisesInstance ( array $args = array() )
Executes the RegisterOnPremisesInstance operation.
-
public
removeTagsFromOnPremisesInstances ( array $args = array() )
Executes the RemoveTagsFromOnPremisesInstances operation.
-
public
stopDeployment ( array $args = array() )
Executes the StopDeployment operation.
-
public
updateApplication ( array $args = array() )
Executes the UpdateApplication operation.
-
public
updateDeploymentGroup ( array $args = array() )
Executes the UpdateDeploymentGroup operation.
Methods detail
public static
Aws\CodeDeploy\CodeDeployClient
factory( array|Guzzle\Common\Collection
$config = array() )
Factory method to create a new AWS CodeDeploy client using an array of configuration options.
See http://docs.aws.amazon.com/aws-sdk-php/v2/guide/configuration.html#client-configuration-options
Parameters
- $config
array|
Guzzle\Common\Collection
$config Client configuration data
Returns
Link
Overrides
Executes the AddTagsToOnPremisesInstances operation.
Adds tags to on-premises instances.
Examples
- Basic formatting example
$result = $client->addTagsToOnPremisesInstances(array( // tags is required 'tags' => array( array( 'Key' => 'string', 'Value' => 'string', ), // ... repeated ), // instanceNames is required 'instanceNames' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
tags => (array<associative-array>)The tag key-value pairs to add to the on-premises instances.
Keys and values are both required. Keys cannot be nulls or empty strings. Value-only tags are not allowed.
- (associative-array)
Information about a tag.
-
Key => (string)The tag's key.
-
Value => (string)The tag's value.
-
- (associative-array)
-
instanceNames => (array<string>)The names of the on-premises instances to add tags to.
-
Returns
Executes the BatchGetApplications operation.
Gets information about one or more applications.
Examples
- Basic formatting example
$result = $client->batchGetApplications(array( 'applicationNames' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationNames => (array<string>)A list of application names, with multiple application names separated by spaces.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
applicationsInfo => (array<associative-array>)Information about the applications.
- (associative-array)
Information about an application.
-
applicationId => (string)The application ID.
-
applicationName => (string)The application name.
-
createTime => (string)The time that the application was created.
-
linkedToGitHub => (bool)True if the user has authenticated with GitHub for the specified application; otherwise, false.
-
- (associative-array)
Executes the BatchGetDeployments operation.
Gets information about one or more deployments.
Examples
- Basic formatting example
$result = $client->batchGetDeployments(array( 'deploymentIds' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentIds => (array<string>)A list of deployment IDs, with multiple deployment IDs separated by spaces.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentsInfo => (array<associative-array>)Information about the deployments.
- (associative-array)
Information about a deployment.
-
applicationName => (string)The application name.
-
deploymentGroupName => (string)The deployment group name.
-
deploymentConfigName => (string)The deployment configuration name.
-
deploymentId => (string)The deployment ID.
-
revision => (associative-array)Information about the location of application artifacts that are stored and the service to retrieve them from.
-
revisionType => (string)The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string)The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
-
status => (string)The current state of the deployment as a whole.
-
errorInformation => (associative-array)Information about any error associated with this deployment.
-
code => (string)The error code:
- APPLICATION_MISSING: The application was missing. Note that this error code will most likely be raised if the application is deleted after the deployment is created but before it starts.
- DEPLOYMENT_GROUP_MISSING: The deployment group was missing. Note that this error code will most likely be raised if the deployment group is deleted after the deployment is created but before it starts.
- HEALTH_CONSTRAINTS: The deployment failed on too many instances to be able to successfully deploy within the specified instance health constraints.
- HEALTH_CONSTRAINTS_INVALID: The revision can never successfully deploy within the instance health constraints as specified.
- IAM_ROLE_MISSING: The service role cannot be accessed.
- IAM_ROLE_PERMISSIONS: The service role does not have the correct permissions.
- INTERNAL_ERROR: There was an internal error.
- NO_EC2_SUBSCRIPTION: The calling account is not subscribed to the Amazon EC2 service.
- NO_INSTANCES: No instances were specified, or no instances can be found.
- OVER_MAX_INSTANCES: The maximum number of instances was exceeded.
- THROTTLED: The operation was throttled because the calling account exceeded the throttling limits of one or more AWS services.
- TIMEOUT: The deployment has timed out.
- REVISION_MISSING: The revision ID was missing. Note that this error code will most likely be raised if the revision is deleted after the deployment is created but before it starts.
-
message => (string)An accompanying error message.
-
-
createTime => (string)A timestamp indicating when the deployment was created.
-
startTime => (string)A timestamp indicating when the deployment began deploying to the deployment group.
Note that in some cases, the reported value of the start time may be later than the complete time. This is due to differences in the clock settings of various back-end servers that participate in the overall deployment process.
-
completeTime => (string)A timestamp indicating when the deployment was completed.
-
deploymentOverview => (associative-array)A summary of the deployment status of the instances in the deployment.
-
Pending => (int)The number of instances that are pending in the deployment.
-
InProgress => (int)The number of instances that are in progress in the deployment.
-
Succeeded => (int)The number of instances that have succeeded in the deployment.
-
Failed => (int)The number of instances that have failed in the deployment.
-
Skipped => (int)The number of instances that have been skipped in the deployment.
-
-
description => (string)A comment about the deployment.
-
creator => (string)How the deployment was created:
- user: A user created the deployment.
- autoscaling: Auto Scaling created the deployment.
-
ignoreApplicationStopFailures => (bool)If true, then if the deployment causes the ApplicationStop deployment lifecycle event to fail to a specific instance, the deployment will not be considered to have failed to that instance at that point and will continue on to the BeforeInstall deployment lifecycle event.
If false or not specified, then if the deployment causes the ApplicationStop deployment lifecycle event to fail to a specific instance, the deployment will stop to that instance, and the deployment to that instance will be considered to have failed.
-
- (associative-array)
Executes the BatchGetOnPremisesInstances operation.
Gets information about one or more on-premises instances.
Examples
- Basic formatting example
$result = $client->batchGetOnPremisesInstances(array( 'instanceNames' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
instanceNames => (array<string>)The names of the on-premises instances to get information about.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
instanceInfos => (array<associative-array>)Information about the on-premises instances.
- (associative-array)
Information about an on-premises instance.
-
instanceName => (string)The name of the on-premises instance.
-
iamUserArn => (string)The IAM user ARN associated with the on-premises instance.
-
instanceArn => (string)The ARN of the on-premises instance.
-
registerTime => (string)The time that the on-premises instance was registered.
-
deregisterTime => (string)If the on-premises instance was deregistered, the time that the on-premises instance was deregistered.
-
tags => (array<associative-array>)The tags that are currently associated with the on-premises instance.
- (associative-array)
Information about a tag.
-
Key => (string)The tag's key.
-
Value => (string)The tag's value.
-
- (associative-array)
-
- (associative-array)
Executes the CreateApplication operation.
Creates a new application.
Examples
- Basic formatting example
$result = $client->createApplication(array( // applicationName is required 'applicationName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of the application. This name must be unique with the applicable &IAM; user or &AWS; account.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
applicationId => (string)A unique application ID.
Executes the CreateDeployment operation.
Deploys an application revision through the specified deployment group.
Examples
- Basic formatting example
$result = $client->createDeployment(array( // applicationName is required 'applicationName' => 'string', 'deploymentGroupName' => 'string', 'revision' => array( 'revisionType' => 'string', 's3Location' => array( 'bucket' => 'string', 'key' => 'string', 'bundleType' => 'string', 'version' => 'string', 'eTag' => 'string', ), 'gitHubLocation' => array( 'repository' => 'string', 'commitId' => 'string', ), ), 'deploymentConfigName' => 'string', 'description' => 'string', 'ignoreApplicationStopFailures' => true || false, ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
deploymentGroupName => (string)The deployment group's name.
-
revision => (associative-array)The type of revision to deploy, along with information about the revision's location.
-
revisionType => (string:S3 |GitHub )The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string:tar |tgz |zip )The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
-
deploymentConfigName => (string)The name of an existing deployment configuration associated with the applicable IAM user or AWS account.
If not specified, the value configured in the deployment group will be used as the default. If the deployment group does not have a deployment configuration associated with it, then CodeDeployDefault.OneAtATime will be used by default.
-
description => (string)A comment about the deployment.
-
ignoreApplicationStopFailures => (bool)If set to true, then if the deployment causes the ApplicationStop deployment lifecycle event to fail to a specific instance, the deployment will not be considered to have failed to that instance at that point and will continue on to the BeforeInstall deployment lifecycle event.
If set to false or not specified, then if the deployment causes the ApplicationStop deployment lifecycle event to fail to a specific instance, the deployment will stop to that instance, and the deployment to that instance will be considered to have failed.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentId => (string)A unique deployment ID.
Executes the CreateDeploymentConfig operation.
Creates a new deployment configuration.
Examples
- Basic formatting example
$result = $client->createDeploymentConfig(array( // deploymentConfigName is required 'deploymentConfigName' => 'string', 'minimumHealthyHosts' => array( '' => '', ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentConfigName => (string)The name of the deployment configuration to create.
-
minimumHealthyHosts => (associative-array)The minimum number of healthy instances that should be available at any time during the deployment. There are two parameters expected in the input: type and value.
The type parameter takes either of the following values:
- HOST_COUNT: The value parameter represents the minimum number of healthy instances, as an absolute value.
- FLEET_PERCENT: The value parameter represents the minimum number of healthy instances, as a percentage of the total number of instances in the deployment. If you specify FLEET_PERCENT, then at the start of the deployment AWS CodeDeploy converts the percentage to the equivalent number of instances and rounds fractional instances up.
The value parameter takes an integer.
For example, to set a minimum of 95% healthy instances, specify a type of FLEET_PERCENT and a value of 95.
-
=> (associative-array) Associative array of custom key value pairs
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentConfigId => (string)A unique deployment configuration ID.
Executes the CreateDeploymentGroup operation.
Creates a new deployment group for application revisions to be deployed to.
Examples
- Basic formatting example
$result = $client->createDeploymentGroup(array( // applicationName is required 'applicationName' => 'string', // deploymentGroupName is required 'deploymentGroupName' => 'string', 'deploymentConfigName' => 'string', 'ec2TagFilters' => array( array( 'Key' => 'string', 'Value' => 'string', 'Type' => 'string', ), // ... repeated ), 'onPremisesInstanceTagFilters' => array( array( 'Key' => 'string', 'Value' => 'string', 'Type' => 'string', ), // ... repeated ), 'autoScalingGroups' => array('string', ... ), // serviceRoleArn is required 'serviceRoleArn' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
deploymentGroupName => (string)The name of an existing deployment group for the specified application.
-
deploymentConfigName => (string)If specified, the deployment configuration name must be one of the predefined values, or it can be a custom deployment configuration:
- CodeDeployDefault.AllAtOnce deploys an application revision to up to all of the instances at once. The overall deployment succeeds if the application revision deploys to at least one of the instances. The overall deployment fails after the application revision fails to deploy to all of the instances. For example, for 9 instances, deploy to up to all 9 instances at once. The overall deployment succeeds if any of the 9 instances is successfully deployed to, and it fails if all 9 instances fail to be deployed to.
- CodeDeployDefault.HalfAtATime deploys to up to half of the instances at a time (with fractions rounded down). The overall deployment succeeds if the application revision deploys to at least half of the instances (with fractions rounded up); otherwise, the deployment fails. For example, for 9 instances, deploy to up to 4 instances at a time. The overall deployment succeeds if 5 or more instances are successfully deployed to; otherwise, the deployment fails. Note that the deployment may successfully deploy to some instances, even if the overall deployment fails.
- CodeDeployDefault.OneAtATime deploys the application revision to only one of the instances at a time. The overall deployment succeeds if the application revision deploys to all of the instances. The overall deployment fails after the application revision first fails to deploy to any one instances. For example, for 9 instances, deploy to one instance at a time. The overall deployment succeeds if all 9 instances are successfully deployed to, and it fails if any of one of the 9 instances fail to be deployed to. Note that the deployment may successfully deploy to some instances, even if the overall deployment fails. This is the default deployment configuration if a configuration isn't specified for either the deployment or the deployment group.
To create a custom deployment configuration, call the create deployment configuration operation.
-
ec2TagFilters => (array<associative-array>)The Amazon EC2 tags to filter on.
- (associative-array)
Information about a tag filter.
-
Key => (string)The tag filter key.
-
Value => (string)The tag filter value.
-
Type => (string:KEY_ONLY |VALUE_ONLY |KEY_AND_VALUE )The tag filter type:
- KEY_ONLY: Key only.
- VALUE_ONLY: Value only.
- KEY_AND_VALUE: Key and value.
-
- (associative-array)
-
onPremisesInstanceTagFilters => (array<associative-array>)The on-premises instance tags to filter on.
- (associative-array)
Information about an on-premises instance tag filter.
-
Key => (string)The on-premises instance tag filter key.
-
Value => (string)The on-premises instance tag filter value.
-
Type => (string:KEY_ONLY |VALUE_ONLY |KEY_AND_VALUE )The on-premises instance tag filter type:
- KEY_ONLY: Key only.
- VALUE_ONLY: Value only.
- KEY_AND_VALUE: Key and value.
-
- (associative-array)
-
autoScalingGroups => (array<string>)A list of associated Auto Scaling groups.
-
serviceRoleArn => (string)A service role ARN that allows AWS CodeDeploy to act on the user's behalf when interacting with AWS services.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentGroupId => (string)A unique deployment group ID.
Executes the DeleteApplication operation.
Deletes an application.
Examples
- Basic formatting example
$result = $client->deleteApplication(array( // applicationName is required 'applicationName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
Returns
Executes the DeleteDeploymentConfig operation.
Deletes a deployment configuration.
A deployment configuration cannot be deleted if it is currently in use. Also, predefined configurations cannot be deleted.Examples
- Basic formatting example
$result = $client->deleteDeploymentConfig(array( // deploymentConfigName is required 'deploymentConfigName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentConfigName => (string)The name of an existing deployment configuration associated with the applicable IAM user or AWS account.
-
Returns
Executes the DeleteDeploymentGroup operation.
Deletes a deployment group.
Examples
- Basic formatting example
$result = $client->deleteDeploymentGroup(array( // applicationName is required 'applicationName' => 'string', // deploymentGroupName is required 'deploymentGroupName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
deploymentGroupName => (string)The name of an existing deployment group for the specified application.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
hooksNotCleanedUp => (array<associative-array>)If the output contains no data, and the corresponding deployment group contained at least one Auto Scaling group, AWS CodeDeploy successfully removed all corresponding Auto Scaling lifecycle event hooks from the Amazon EC2 instances in the Auto Scaling. If the output does contain data, AWS CodeDeploy could not remove some Auto Scaling lifecycle event hooks from the Amazon EC2 instances in the Auto Scaling group.
- (associative-array)
Information about an Auto Scaling group.
-
name => (string)The Auto Scaling group name.
-
hook => (string)An Auto Scaling lifecycle event hook name.
-
- (associative-array)
Executes the DeregisterOnPremisesInstance operation.
Deregisters an on-premises instance.
Examples
- Basic formatting example
$result = $client->deregisterOnPremisesInstance(array( // instanceName is required 'instanceName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
instanceName => (string)The name of the on-premises instance to deregister.
-
Returns
Executes the GetApplication operation.
Gets information about an application.
Examples
- Basic formatting example
$result = $client->getApplication(array( // applicationName is required 'applicationName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
application => (associative-array)Information about the application.
-
applicationId => (string)The application ID.
-
applicationName => (string)The application name.
-
createTime => (string)The time that the application was created.
-
linkedToGitHub => (bool)True if the user has authenticated with GitHub for the specified application; otherwise, false.
-
Executes the GetApplicationRevision operation.
Gets information about an application revision.
Examples
- Basic formatting example
$result = $client->getApplicationRevision(array( // applicationName is required 'applicationName' => 'string', // revision is required 'revision' => array( 'revisionType' => 'string', 's3Location' => array( 'bucket' => 'string', 'key' => 'string', 'bundleType' => 'string', 'version' => 'string', 'eTag' => 'string', ), 'gitHubLocation' => array( 'repository' => 'string', 'commitId' => 'string', ), ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of the application that corresponds to the revision.
-
revision => (associative-array)Information about the application revision to get, including the revision's type and its location.
-
revisionType => (string:S3 |GitHub )The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string:tar |tgz |zip )The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
applicationName => (string)The name of the application that corresponds to the revision.
-
revision => (associative-array)Additional information about the revision, including the revision's type and its location.
-
revisionType => (string)The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string)The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
-
revisionInfo => (associative-array)General information about the revision.
-
description => (string)A comment about the revision.
-
deploymentGroups => (array<string>)A list of deployment groups that use this revision.
-
firstUsedTime => (string)When the revision was first used by AWS CodeDeploy.
-
lastUsedTime => (string)When the revision was last used by AWS CodeDeploy.
-
registerTime => (string)When the revision was registered with AWS CodeDeploy.
-
Executes the GetDeployment operation.
Gets information about a deployment.
Examples
- Basic formatting example
$result = $client->getDeployment(array( // deploymentId is required 'deploymentId' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentId => (string)An existing deployment ID associated with the applicable IAM user or AWS account.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentInfo => (associative-array)Information about the deployment.
-
applicationName => (string)The application name.
-
deploymentGroupName => (string)The deployment group name.
-
deploymentConfigName => (string)The deployment configuration name.
-
deploymentId => (string)The deployment ID.
-
revision => (associative-array)Information about the location of application artifacts that are stored and the service to retrieve them from.
-
revisionType => (string)The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string)The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
-
status => (string)The current state of the deployment as a whole.
-
errorInformation => (associative-array)Information about any error associated with this deployment.
-
code => (string)The error code:
- APPLICATION_MISSING: The application was missing. Note that this error code will most likely be raised if the application is deleted after the deployment is created but before it starts.
- DEPLOYMENT_GROUP_MISSING: The deployment group was missing. Note that this error code will most likely be raised if the deployment group is deleted after the deployment is created but before it starts.
- HEALTH_CONSTRAINTS: The deployment failed on too many instances to be able to successfully deploy within the specified instance health constraints.
- HEALTH_CONSTRAINTS_INVALID: The revision can never successfully deploy within the instance health constraints as specified.
- IAM_ROLE_MISSING: The service role cannot be accessed.
- IAM_ROLE_PERMISSIONS: The service role does not have the correct permissions.
- INTERNAL_ERROR: There was an internal error.
- NO_EC2_SUBSCRIPTION: The calling account is not subscribed to the Amazon EC2 service.
- NO_INSTANCES: No instances were specified, or no instances can be found.
- OVER_MAX_INSTANCES: The maximum number of instances was exceeded.
- THROTTLED: The operation was throttled because the calling account exceeded the throttling limits of one or more AWS services.
- TIMEOUT: The deployment has timed out.
- REVISION_MISSING: The revision ID was missing. Note that this error code will most likely be raised if the revision is deleted after the deployment is created but before it starts.
-
message => (string)An accompanying error message.
-
-
createTime => (string)A timestamp indicating when the deployment was created.
-
startTime => (string)A timestamp indicating when the deployment began deploying to the deployment group.
Note that in some cases, the reported value of the start time may be later than the complete time. This is due to differences in the clock settings of various back-end servers that participate in the overall deployment process.
-
completeTime => (string)A timestamp indicating when the deployment was completed.
-
deploymentOverview => (associative-array)A summary of the deployment status of the instances in the deployment.
-
Pending => (int)The number of instances that are pending in the deployment.
-
InProgress => (int)The number of instances that are in progress in the deployment.
-
Succeeded => (int)The number of instances that have succeeded in the deployment.
-
Failed => (int)The number of instances that have failed in the deployment.
-
Skipped => (int)The number of instances that have been skipped in the deployment.
-
-
description => (string)A comment about the deployment.
-
creator => (string)How the deployment was created:
- user: A user created the deployment.
- autoscaling: Auto Scaling created the deployment.
-
ignoreApplicationStopFailures => (bool)If true, then if the deployment causes the ApplicationStop deployment lifecycle event to fail to a specific instance, the deployment will not be considered to have failed to that instance at that point and will continue on to the BeforeInstall deployment lifecycle event.
If false or not specified, then if the deployment causes the ApplicationStop deployment lifecycle event to fail to a specific instance, the deployment will stop to that instance, and the deployment to that instance will be considered to have failed.
-
Executes the GetDeploymentConfig operation.
Gets information about a deployment configuration.
Examples
- Basic formatting example
$result = $client->getDeploymentConfig(array( // deploymentConfigName is required 'deploymentConfigName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentConfigName => (string)The name of an existing deployment configuration associated with the applicable IAM user or AWS account.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentConfigInfo => (associative-array)Information about the deployment configuration.
-
deploymentConfigId => (string)The deployment configuration ID.
-
deploymentConfigName => (string)The deployment configuration name.
-
minimumHealthyHosts => (associative-array)Information about the number or percentage of minimum healthy instances.
-
=> (associative-array) Associative array of custom key value pairs
-
-
createTime => (string)The time that the deployment configuration was created.
-
Executes the GetDeploymentGroup operation.
Gets information about a deployment group.
Examples
- Basic formatting example
$result = $client->getDeploymentGroup(array( // applicationName is required 'applicationName' => 'string', // deploymentGroupName is required 'deploymentGroupName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
deploymentGroupName => (string)The name of an existing deployment group for the specified application.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentGroupInfo => (associative-array)Information about the deployment group.
-
applicationName => (string)The application name.
-
deploymentGroupId => (string)The deployment group ID.
-
deploymentGroupName => (string)The deployment group name.
-
deploymentConfigName => (string)The deployment configuration name.
-
ec2TagFilters => (array<associative-array>)The Amazon EC2 tags to filter on.
- (associative-array)
Information about a tag filter.
-
Key => (string)The tag filter key.
-
Value => (string)The tag filter value.
-
Type => (string)The tag filter type:
- KEY_ONLY: Key only.
- VALUE_ONLY: Value only.
- KEY_AND_VALUE: Key and value.
-
- (associative-array)
-
onPremisesInstanceTagFilters => (array<associative-array>)The on-premises instance tags to filter on.
- (associative-array)
Information about an on-premises instance tag filter.
-
Key => (string)The on-premises instance tag filter key.
-
Value => (string)The on-premises instance tag filter value.
-
Type => (string)The on-premises instance tag filter type:
- KEY_ONLY: Key only.
- VALUE_ONLY: Value only.
- KEY_AND_VALUE: Key and value.
-
- (associative-array)
-
autoScalingGroups => (array<associative-array>)A list of associated Auto Scaling groups.
- (associative-array)
Information about an Auto Scaling group.
-
name => (string)The Auto Scaling group name.
-
hook => (string)An Auto Scaling lifecycle event hook name.
-
- (associative-array)
-
serviceRoleArn => (string)A service role ARN.
-
targetRevision => (associative-array)Information about the deployment group's target revision, including the revision's type and its location.
-
revisionType => (string)The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string)The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
-
Executes the GetDeploymentInstance operation.
Gets information about an instance as part of a deployment.
Examples
- Basic formatting example
$result = $client->getDeploymentInstance(array( // deploymentId is required 'deploymentId' => 'string', // instanceId is required 'instanceId' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentId => (string)The unique ID of a deployment.
-
instanceId => (string)The unique ID of an instance in the deployment's deployment group.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
instanceSummary => (associative-array)Information about the instance.
-
deploymentId => (string)The deployment ID.
-
instanceId => (string)The instance ID.
-
status => (string)The deployment status for this instance:
- Pending: The deployment is pending for this instance.
- In Progress: The deployment is in progress for this instance.
- Succeeded: The deployment has succeeded for this instance.
- Failed: The deployment has failed for this instance.
- Skipped: The deployment has been skipped for this instance.
- Unknown: The deployment status is unknown for this instance.
-
lastUpdatedAt => (string)A timestamp indicating when the instance information was last updated.
-
lifecycleEvents => (array<associative-array>)A list of lifecycle events for this instance.
- (associative-array)
Information about a deployment lifecycle event.
-
lifecycleEventName => (string)The deployment lifecycle event name, such as ApplicationStop, BeforeInstall, AfterInstall, ApplicationStart, or ValidateService.
-
diagnostics => (associative-array)Diagnostic information about the deployment lifecycle event.
-
errorCode => (string)The associated error code:
- Success: The specified script ran.
- ScriptMissing: The specified script was not found in the specified location.
- ScriptNotExecutable: The specified script is not a recognized executable file type.
- ScriptTimedOut: The specified script did not finish running in the specified time period.
- ScriptFailed: The specified script failed to run as expected.
- UnknownError: The specified script did not run for an unknown reason.
-
scriptName => (string)The name of the script.
-
message => (string)The message associated with the error.
-
logTail => (string)The last portion of the associated diagnostic log.
-
-
startTime => (string)A timestamp indicating when the deployment lifecycle event started.
-
endTime => (string)A timestamp indicating when the deployment lifecycle event ended.
-
status => (string)The deployment lifecycle event status:
- Pending: The deployment lifecycle event is pending.
- InProgress: The deployment lifecycle event is in progress.
- Succeeded: The deployment lifecycle event has succeeded.
- Failed: The deployment lifecycle event has failed.
- Skipped: The deployment lifecycle event has been skipped.
- Unknown: The deployment lifecycle event is unknown.
-
- (associative-array)
-
Executes the GetOnPremisesInstance operation.
Gets information about an on-premises instance.
Examples
- Basic formatting example
$result = $client->getOnPremisesInstance(array( // instanceName is required 'instanceName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
instanceName => (string)The name of the on-premises instance to get information about
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
instanceInfo => (associative-array)Information about the on-premises instance.
-
instanceName => (string)The name of the on-premises instance.
-
iamUserArn => (string)The IAM user ARN associated with the on-premises instance.
-
instanceArn => (string)The ARN of the on-premises instance.
-
registerTime => (string)The time that the on-premises instance was registered.
-
deregisterTime => (string)If the on-premises instance was deregistered, the time that the on-premises instance was deregistered.
-
tags => (array<associative-array>)The tags that are currently associated with the on-premises instance.
- (associative-array)
Information about a tag.
-
Key => (string)The tag's key.
-
Value => (string)The tag's value.
-
- (associative-array)
-
Executes the ListApplicationRevisions operation.
Lists information about revisions for an application.
Examples
- Basic formatting example
$result = $client->listApplicationRevisions(array( // applicationName is required 'applicationName' => 'string', 'sortBy' => 'string', 'sortOrder' => 'string', 's3Bucket' => 'string', 's3KeyPrefix' => 'string', 'deployed' => 'string', 'nextToken' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
sortBy => (string:registerTime |firstUsedTime |lastUsedTime )The column name to sort the list results by:
- registerTime: Sort the list results by when the revisions were registered with AWS CodeDeploy.
- firstUsedTime: Sort the list results by when the revisions were first used by in a deployment.
- lastUsedTime: Sort the list results by when the revisions were last used in a deployment.
If not specified or set to null, the results will be returned in an arbitrary order.
-
sortOrder => (string:ascending |descending )The order to sort the list results by:
- ascending: Sort the list of results in ascending order.
- descending: Sort the list of results in descending order.
If not specified, the results will be sorted in ascending order.
If set to null, the results will be sorted in an arbitrary order.
-
s3Bucket => (string)A specific Amazon S3 bucket name to limit the search for revisions.
If set to null, then all of the user's buckets will be searched.
-
s3KeyPrefix => (string)A specific key prefix for the set of Amazon S3 objects to limit the search for revisions.
-
deployed => (string:include |exclude |ignore )Whether to list revisions based on whether the revision is the target revision of an deployment group:
- include: List revisions that are target revisions of a deployment group.
- exclude: Do not list revisions that are target revisions of a deployment group.
- ignore: List all revisions, regardless of whether they are target revisions of a deployment group.
-
nextToken => (string)An identifier that was returned from the previous list application revisions call, which can be used to return the next set of applications in the list.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
revisions => (array<associative-array>)A list of revision locations that contain the matching revisions.
- (associative-array)
Information about an application revision's location.
-
revisionType => (string)The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string)The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
- (associative-array)
-
nextToken => (string)If the amount of information that is returned is significantly large, an identifier will also be returned, which can be used in a subsequent list application revisions call to return the next set of application revisions in the list.
Executes the ListApplications operation.
Lists the applications registered with the applicable IAM user or AWS account.
Examples
- Basic formatting example
$result = $client->listApplications(array( 'nextToken' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
nextToken => (string)An identifier that was returned from the previous list applications call, which can be used to return the next set of applications in the list.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
applications => (array<string>)A list of application names.
-
nextToken => (string)If the amount of information that is returned is significantly large, an identifier will also be returned, which can be used in a subsequent list applications call to return the next set of applications in the list.
Executes the ListDeploymentConfigs operation.
Lists the deployment configurations with the applicable IAM user or AWS account.
Examples
- Basic formatting example
$result = $client->listDeploymentConfigs(array( 'nextToken' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
nextToken => (string)An identifier that was returned from the previous list deployment configurations call, which can be used to return the next set of deployment configurations in the list.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deploymentConfigsList => (array<string>)A list of deployment configurations, including the built-in configurations such as CodeDeployDefault.OneAtATime.
-
nextToken => (string)If the amount of information that is returned is significantly large, an identifier will also be returned, which can be used in a subsequent list deployment configurations call to return the next set of deployment configurations in the list.
Executes the ListDeploymentGroups operation.
Lists the deployment groups for an application registered with the applicable IAM user or AWS account.
Examples
- Basic formatting example
$result = $client->listDeploymentGroups(array( // applicationName is required 'applicationName' => 'string', 'nextToken' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
nextToken => (string)An identifier that was returned from the previous list deployment groups call, which can be used to return the next set of deployment groups in the list.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
applicationName => (string)The application name.
-
deploymentGroups => (array<string>)A list of corresponding deployment group names.
-
nextToken => (string)If the amount of information that is returned is significantly large, an identifier will also be returned, which can be used in a subsequent list deployment groups call to return the next set of deployment groups in the list.
Executes the ListDeploymentInstances operation.
Lists the instances for a deployment associated with the applicable IAM user or AWS account.
Examples
- Basic formatting example
$result = $client->listDeploymentInstances(array( // deploymentId is required 'deploymentId' => 'string', 'nextToken' => 'string', 'instanceStatusFilter' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentId => (string)The unique ID of a deployment.
-
nextToken => (string)An identifier that was returned from the previous list deployment instances call, which can be used to return the next set of deployment instances in the list.
-
instanceStatusFilter => (array<string:Pending |InProgress |Succeeded |Failed |Skipped |Unknown >)A subset of instances to list, by status:
- Pending: Include in the resulting list those instances with pending deployments.
- InProgress: Include in the resulting list those instances with in-progress deployments.
- Succeeded: Include in the resulting list those instances with succeeded deployments.
- Failed: Include in the resulting list those instances with failed deployments.
- Skipped: Include in the resulting list those instances with skipped deployments.
- Unknown: Include in the resulting list those instances with deployments in an unknown state.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
instancesList => (array<string>)A list of instances IDs.
-
nextToken => (string)If the amount of information that is returned is significantly large, an identifier will also be returned, which can be used in a subsequent list deployment instances call to return the next set of deployment instances in the list.
Executes the ListDeployments operation.
Lists the deployments within a deployment group for an application registered with the applicable IAM user or AWS account.
Examples
- Basic formatting example
$result = $client->listDeployments(array( 'applicationName' => 'string', 'deploymentGroupName' => 'string', 'includeOnlyStatuses' => array('string', ... ), 'createTimeRange' => array( 'start' => '', 'end' => '', ), 'nextToken' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
deploymentGroupName => (string)The name of an existing deployment group for the specified application.
-
includeOnlyStatuses => (array<string:Created |Queued |InProgress |Succeeded |Failed |Stopped >)A subset of deployments to list, by status:
- Created: Include in the resulting list created deployments.
- Queued: Include in the resulting list queued deployments.
- In Progress: Include in the resulting list in-progress deployments.
- Succeeded: Include in the resulting list succeeded deployments.
- Failed: Include in the resulting list failed deployments.
- Aborted: Include in the resulting list aborted deployments.
-
createTimeRange => (associative-array)A deployment creation start- and end-time range for returning a subset of the list of deployments.
-
start => ()The time range's start time.
Specify null to leave the time range's start time open-ended. -
end => ()The time range's end time.
Specify null to leave the time range's end time open-ended.
-
-
nextToken => (string)An identifier that was returned from the previous list deployments call, which can be used to return the next set of deployments in the list.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
deployments => (array<string>)A list of deployment IDs.
-
nextToken => (string)If the amount of information that is returned is significantly large, an identifier will also be returned, which can be used in a subsequent list deployments call to return the next set of deployments in the list.
Executes the ListOnPremisesInstances operation.
Gets a list of one or more on-premises instance names.
Unless otherwise specified, both registered and deregistered on-premises instance names will be listed. To list only registered or deregistered on-premises instance names, use the registration status parameter.
Examples
- Basic formatting example
$result = $client->listOnPremisesInstances(array( 'registrationStatus' => 'string', 'tagFilters' => array( array( 'Key' => 'string', 'Value' => 'string', 'Type' => 'string', ), // ... repeated ), 'nextToken' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
registrationStatus => (string:Registered |Deregistered )The on-premises instances registration status:
- Deregistered: Include in the resulting list deregistered on-premises instances.
- Registered: Include in the resulting list registered on-premises instances.
-
tagFilters => (array<associative-array>)The on-premises instance tags that will be used to restrict the corresponding on-premises instance names that are returned.
- (associative-array)
Information about an on-premises instance tag filter.
-
Key => (string)The on-premises instance tag filter key.
-
Value => (string)The on-premises instance tag filter value.
-
Type => (string:KEY_ONLY |VALUE_ONLY |KEY_AND_VALUE )The on-premises instance tag filter type:
- KEY_ONLY: Key only.
- VALUE_ONLY: Value only.
- KEY_AND_VALUE: Key and value.
-
- (associative-array)
-
nextToken => (string)An identifier that was returned from the previous list on-premises instances call, which can be used to return the next set of on-premises instances in the list.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
instanceNames => (array<string>)The list of matching on-premises instance names.
-
nextToken => (string)If the amount of information that is returned is significantly large, an identifier will also be returned, which can be used in a subsequent list on-premises instances call to return the next set of on-premises instances in the list.
Executes the RegisterApplicationRevision operation.
Registers with AWS CodeDeploy a revision for the specified application.
Examples
- Basic formatting example
$result = $client->registerApplicationRevision(array( // applicationName is required 'applicationName' => 'string', 'description' => 'string', // revision is required 'revision' => array( 'revisionType' => 'string', 's3Location' => array( 'bucket' => 'string', 'key' => 'string', 'bundleType' => 'string', 'version' => 'string', 'eTag' => 'string', ), 'gitHubLocation' => array( 'repository' => 'string', 'commitId' => 'string', ), ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The name of an existing AWS CodeDeploy application associated with the applicable &IAM; user or &AWS; account.
-
description => (string)A comment about the revision.
-
revision => (associative-array)Information about the application revision to register, including the revision's type and its location.
-
revisionType => (string:S3 |GitHub )The application revision's type:
- S3: An application revision stored in Amazon S3.
- GitHub: An application revision stored in GitHub.
-
s3Location => (associative-array)Information about the location of application artifacts that are stored in Amazon S3.
-
bucket => (string)The name of the Amazon S3 bucket where the application revision is stored.
-
key => (string)The name of the Amazon S3 object that represents the bundled artifacts for the application revision.
-
bundleType => (string:tar |tgz |zip )The file type of the application revision. Must be one of the following:
- tar: A tar archive file.
- tgz: A compressed tar archive file.
- zip: A zip archive file.
-
version => (string)A specific version of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the version is not specified, the system will use the most recent version by default.
-
eTag => (string)The ETag of the Amazon S3 object that represents the bundled artifacts for the application revision.
If the ETag is not specified as an input parameter, ETag validation of the object will be skipped.
-
-
gitHubLocation => (associative-array)Information about the location of application artifacts that are stored in GitHub.
-
repository => (string)The GitHub account and repository pair that stores a reference to the commit that represents the bundled artifacts for the application revision.
Specified as account/repository.
-
commitId => (string)The SHA1 commit ID of the GitHub commit that references the that represents the bundled artifacts for the application revision.
-
-
-
Returns
Executes the RegisterOnPremisesInstance operation.
Registers an on-premises instance.
Examples
- Basic formatting example
$result = $client->registerOnPremisesInstance(array( // instanceName is required 'instanceName' => 'string', // iamUserArn is required 'iamUserArn' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
instanceName => (string)The name of the on-premises instance to register.
-
iamUserArn => (string)The ARN of the IAM user to associate with the on-premises instance.
-
Returns
Executes the RemoveTagsFromOnPremisesInstances operation.
Removes one or more tags from one or more on-premises instances.
Examples
- Basic formatting example
$result = $client->removeTagsFromOnPremisesInstances(array( // tags is required 'tags' => array( array( 'Key' => 'string', 'Value' => 'string', ), // ... repeated ), // instanceNames is required 'instanceNames' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
tags => (array<associative-array>)The tag key-value pairs to remove from the on-premises instances.
- (associative-array)
Information about a tag.
-
Key => (string)The tag's key.
-
Value => (string)The tag's value.
-
- (associative-array)
-
instanceNames => (array<string>)The names of the on-premises instances to remove tags from.
-
Returns
Executes the StopDeployment operation.
Attempts to stop an ongoing deployment.
Examples
- Basic formatting example
$result = $client->stopDeployment(array( // deploymentId is required 'deploymentId' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
deploymentId => (string)The unique ID of a deployment.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
status => (string)The status of the stop deployment operation:
- Pending: The stop operation is pending.
- Succeeded: The stop operation succeeded.
-
statusMessage => (string)An accompanying status message.
Executes the UpdateApplication operation.
Changes an existing application's name.
Examples
- Basic formatting example
$result = $client->updateApplication(array( 'applicationName' => 'string', 'newApplicationName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The current name of the application that you want to change.
-
newApplicationName => (string)The new name that you want to change the application to.
-
Returns
Executes the UpdateDeploymentGroup operation.
Changes information about an existing deployment group.
Examples
- Basic formatting example
$result = $client->updateDeploymentGroup(array( // applicationName is required 'applicationName' => 'string', // currentDeploymentGroupName is required 'currentDeploymentGroupName' => 'string', 'newDeploymentGroupName' => 'string', 'deploymentConfigName' => 'string', 'ec2TagFilters' => array( array( 'Key' => 'string', 'Value' => 'string', 'Type' => 'string', ), // ... repeated ), 'onPremisesInstanceTagFilters' => array( array( 'Key' => 'string', 'Value' => 'string', 'Type' => 'string', ), // ... repeated ), 'autoScalingGroups' => array('string', ... ), 'serviceRoleArn' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
applicationName => (string)The application name corresponding to the deployment group to update.
-
currentDeploymentGroupName => (string)The current name of the existing deployment group.
-
newDeploymentGroupName => (string)The new name of the deployment group, if you want to change it.
-
deploymentConfigName => (string)The replacement deployment configuration name to use, if you want to change it.
-
ec2TagFilters => (array<associative-array>)The replacement set of Amazon EC2 tags to filter on, if you want to change them.
- (associative-array)
Information about a tag filter.
-
Key => (string)The tag filter key.
-
Value => (string)The tag filter value.
-
Type => (string:KEY_ONLY |VALUE_ONLY |KEY_AND_VALUE )The tag filter type:
- KEY_ONLY: Key only.
- VALUE_ONLY: Value only.
- KEY_AND_VALUE: Key and value.
-
- (associative-array)
-
onPremisesInstanceTagFilters => (array<associative-array>)The replacement set of on-premises instance tags for filter on, if you want to change them.
- (associative-array)
Information about an on-premises instance tag filter.
-
Key => (string)The on-premises instance tag filter key.
-
Value => (string)The on-premises instance tag filter value.
-
Type => (string:KEY_ONLY |VALUE_ONLY |KEY_AND_VALUE )The on-premises instance tag filter type:
- KEY_ONLY: Key only.
- VALUE_ONLY: Value only.
- KEY_AND_VALUE: Key and value.
-
- (associative-array)
-
autoScalingGroups => (array<string>)The replacement list of Auto Scaling groups to be included in the deployment group, if you want to change them.
-
serviceRoleArn => (string)A replacement service role's ARN, if you want to change it.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
hooksNotCleanedUp => (array<associative-array>)If the output contains no data, and the corresponding deployment group contained at least one Auto Scaling group, AWS CodeDeploy successfully removed all corresponding Auto Scaling lifecycle event hooks from the AWS account. If the output does contain data, AWS CodeDeploy could not remove some Auto Scaling lifecycle event hooks from the AWS account.
- (associative-array)
Information about an Auto Scaling group.
-
name => (string)The Auto Scaling group name.
-
hook => (string)An Auto Scaling lifecycle event hook name.
-
- (associative-array)
Methods inherited from Aws\Common\Client\AbstractClient
__call()
,
__construct()
,
createRequest()
,
getAllEvents()
,
getApiVersion()
,
getCredentials()
,
getRegion()
,
getRegions()
,
getSignature()
,
getWaiter()
,
getWaiterFactory()
,
send()
,
setCredentials()
,
setRegion()
,
setWaiterFactory()
,
waitUntil()
Methods inherited from Guzzle\Service\Client
execute()
,
executeMultiple()
,
getCommand()
,
getCommandFactory()
,
getDescription()
,
getInflector()
,
getIterator()
,
getResourceIteratorFactory()
,
prepareCommand()
,
setCommandFactory()
,
setDescription()
,
setInflector()
,
setResourceIteratorFactory()
Methods inherited from Guzzle\Http\Client
delete()
,
expandTemplate()
,
extractPharCacert()
,
get()
,
getBaseUrl()
,
getConfig()
,
getCurlMulti()
,
getDefaultOption()
,
getDefaultUserAgent()
,
getUriTemplate()
,
head()
,
initSsl()
,
options()
,
patch()
,
post()
,
prepareRequest()
,
put()
,
sendMultiple()
,
setBaseUrl()
,
setConfig()
,
setCurlMulti()
,
setDefaultOption()
,
setRequestFactory()
,
setSslVerification()
,
setUriTemplate()
,
setUserAgent()
Methods inherited from Guzzle\Common\AbstractHasDispatcher
addSubscriber()
,
dispatch()
,
getEventDispatcher()
,
setEventDispatcher()
Magic methods summary
Constants summary
string |
LATEST_API_VERSION |
'2014-10-06' |
Constants inherited from Guzzle\Service\Client
Constants inherited from Guzzle\Http\Client
CURL_OPTIONS
,
DEFAULT_SELECT_TIMEOUT
,
DISABLE_REDIRECTS
,
MAX_HANDLES
,
REQUEST_OPTIONS
,
SSL_CERT_AUTHORITY
Constants inherited from Guzzle\Http\ClientInterface
Properties summary
Properties inherited from Aws\Common\Client\AbstractClient
$aggregator
,
$credentials
,
$signature
,
$waiterFactory
Properties inherited from Guzzle\Service\Client
$commandFactory
,
$inflector
,
$resourceIteratorFactory
,
$serviceDescription
Properties inherited from Guzzle\Http\Client
$defaultHeaders
,
$requestFactory
,
$userAgent