Table Of Contents

Feedback

User Guide

First time using the AWS CLI? See the User Guide for help getting started.

Note: You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . s3api ]

upload-part-copy

Description

Uploads a part by copying data from an existing object as data source. You specify the data source by adding the request header x-amz-copy-source in your request and a byte range by adding the request header x-amz-copy-source-range in your request.

The minimum allowable part size for a multipart upload is 5 MB. For more information about multipart upload limits, go to Quick Facts in the Amazon Simple Storage Service Developer Guide .

Note

Instead of using an existing object as part data, you might use the UploadPart operation and provide data in your request.

You must initiate a multipart upload before you can upload any part. In response to your initiate request. Amazon S3 returns a unique identifier, the upload ID, that you must include in your upload part request.

For more information about using the UploadPartCopy operation, see the following:

  • For conceptual information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon Simple Storage Service Developer Guide .
  • For information about permissions required to use the multipart upload API, see Multipart Upload API and Permissions in the Amazon Simple Storage Service Developer Guide .
  • For information about copying objects using a single atomic operation vs. the multipart upload, see Operations on Objects in the Amazon Simple Storage Service Developer Guide .
  • For information about using server-side encryption with customer-provided encryption keys with the UploadPartCopy operation, see CopyObject and UploadPart .

Note the following additional considerations about the request headers x-amz-copy-source-if-match , x-amz-copy-source-if-none-match , x-amz-copy-source-if-unmodified-since , and x-amz-copy-source-if-modified-since :

  • Consideration 1 - If both of the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request as follows: x-amz-copy-source-if-match condition evaluates to true , and; x-amz-copy-source-if-unmodified-since condition evaluates to false ; Amazon S3 returns 200 OK and copies the data.
  • Consideration 2 - If both of the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request as follows: x-amz-copy-source-if-none-match condition evaluates to false , and; x-amz-copy-source-if-modified-since condition evaluates to true ; Amazon S3 returns 412 Precondition Failed response code.
Versioning

If your bucket has versioning enabled, you could have multiple versions of the same object. By default, x-amz-copy-source identifies the current version of the object to copy. If the current version is a delete marker and you don't specify a versionId in the x-amz-copy-source , Amazon S3 returns a 404 error, because the object does not exist. If you specify versionId in the x-amz-copy-source and the versionId is a delete marker, Amazon S3 returns an HTTP 400 error, because you are not allowed to specify a delete marker as a version for the x-amz-copy-source .

You can optionally specify a specific version of the source object to copy by adding the versionId subresource as shown in the following example:

x-amz-copy-source: /bucket/object?versionId=version id

Special Errors

    • Code: NoSuchUpload
    • Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
    • HTTP Status Code: 404 Not Found
    • Code: InvalidRequest
    • Cause: The specified copy source is not supported as a byte-range copy source.
    • HTTP Status Code: 400 Bad Request

    Related Resources

  • CreateMultipartUpload

  • UploadPart

  • CompleteMultipartUpload

  • AbortMultipartUpload

  • ListParts

  • ListMultipartUploads

See also: AWS API Documentation

See 'aws help' for descriptions of global parameters.

Synopsis

  upload-part-copy
--bucket <value>
--copy-source <value>
[--copy-source-if-match <value>]
[--copy-source-if-modified-since <value>]
[--copy-source-if-none-match <value>]
[--copy-source-if-unmodified-since <value>]
[--copy-source-range <value>]
--key <value>
--part-number <value>
--upload-id <value>
[--sse-customer-algorithm <value>]
[--sse-customer-key <value>]
[--sse-customer-key-md5 <value>]
[--copy-source-sse-customer-algorithm <value>]
[--copy-source-sse-customer-key <value>]
[--copy-source-sse-customer-key-md5 <value>]
[--request-payer <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]

Options

--bucket (string)

The bucket name.

--copy-source (string)

The name of the source bucket and key name of the source object, separated by a slash (/). Must be URL-encoded.

--copy-source-if-match (string)

Copies the object if its entity tag (ETag) matches the specified tag.

--copy-source-if-modified-since (timestamp)

Copies the object if it has been modified since the specified time.

--copy-source-if-none-match (string)

Copies the object if its entity tag (ETag) is different than the specified ETag.

--copy-source-if-unmodified-since (timestamp)

Copies the object if it hasn't been modified since the specified time.

--copy-source-range (string)

The range of bytes to copy from the source object. The range value must use the form bytes=first-last, where the first and last are the zero-based byte offsets to copy. For example, bytes=0-9 indicates that you want to copy the first 10 bytes of the source. You can copy a range only if the source object is greater than 5 MB.

--key (string)

Object key for which the multipart upload was initiated.

--part-number (integer)

Part number of part being copied. This is a positive integer between 1 and 10,000.

--upload-id (string)

Upload ID identifying the multipart upload whose part is being copied.

--sse-customer-algorithm (string)

Specifies the algorithm to use to when encrypting the object (for example, AES256).

--sse-customer-key (string)

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side​-encryption​-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

--sse-customer-key-md5 (string)

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

--copy-source-sse-customer-algorithm (string)

Specifies the algorithm to use when decrypting the source object (for example, AES256).

--copy-source-sse-customer-key (string)

Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be one that was used when the source object was created.

--copy-source-sse-customer-key-md5 (string)

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

--request-payer (string)

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 Developer Guide .

Possible values:

  • requester

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See 'aws help' for descriptions of global parameters.

Examples

To upload part of an object by copying data from an existing object as the data source

The following upload-part-copy example uploads a part by copying data from an existing object as a data source.

aws s3api upload-part-copy \
    --bucket my-bucket \
    --key "Map_Data_June.mp4" \
    --copy-source "my-bucket/copy_of_Map_Data_June.mp4" \
    --part-number 1 \
    --upload-id "bq0tdE1CDpWQYRPLHuNG50xAT6pA5D.m_RiBy0ggOH6b13pVRY7QjvLlf75iFdJqp_2wztk5hvpUM2SesXgrzbehG5hViyktrfANpAD0NO.Nk3XREBqvGeZF6U3ipiSm"

Output:

{
    "CopyPartResult": {
        "LastModified": "2019-12-13T23:16:03.000Z",
        "ETag": "\"711470fc377698c393d94aed6305e245\""
    }
}

Output

CopySourceVersionId -> (string)

The version of the source object that was copied, if you have enabled versioning on the source bucket.

CopyPartResult -> (structure)

Container for all response elements.

ETag -> (string)

Entity tag of the object.

LastModified -> (timestamp)

Date and time at which the object was uploaded.

ServerSideEncryption -> (string)

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

SSECustomerAlgorithm -> (string)

If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.

SSECustomerKeyMD5 -> (string)

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.

SSEKMSKeyId -> (string)

If present, specifies the ID of the AWS Key Management Service (AWS KMS) symmetric customer managed customer master key (CMK) that was used for the object.

RequestCharged -> (string)

If present, indicates that the requester was successfully charged for the request.