选择您的 Cookie 首选项

我们使用必要 Cookie 和类似工具提供我们的网站和服务。我们使用性能 Cookie 收集匿名统计数据,以便我们可以了解客户如何使用我们的网站并进行改进。必要 Cookie 无法停用,但您可以单击“自定义”或“拒绝”来拒绝性能 Cookie。

如果您同意,AWS 和经批准的第三方还将使用 Cookie 提供有用的网站功能、记住您的首选项并显示相关内容,包括相关广告。要接受或拒绝所有非必要 Cookie,请单击“接受”或“拒绝”。要做出更详细的选择,请单击“自定义”。

AWS::FSx::FileSystem OntapConfiguration

聚焦模式

本页内容

AWS::FSx::FileSystem OntapConfiguration - AWS CloudFormation
此页面尚未翻译为您的语言。 请求翻译
筛选器视图

The configuration for this Amazon FSx for NetApp ONTAP file system.

Syntax

To declare this entity in your AWS CloudFormation template, use the following syntax:

Properties

AutomaticBackupRetentionDays

The number of days to retain automatic backups. Setting this property to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 30.

Required: No

Type: Integer

Update requires: No interruption

DailyAutomaticBackupStartTime

A recurring daily time, in the format HH:MM. HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.

Required: No

Type: String

Update requires: No interruption

DeploymentType

Specifies the FSx for ONTAP file system deployment type to use in creating the file system.

  • MULTI_AZ_1 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. This is a first-generation FSx for ONTAP file system.

  • MULTI_AZ_2 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary AZ unavailability. This is a second-generation FSx for ONTAP file system.

  • SINGLE_AZ_1 - A file system configured for Single-AZ redundancy. This is a first-generation FSx for ONTAP file system.

  • SINGLE_AZ_2 - A file system configured with multiple high-availability (HA) pairs for Single-AZ redundancy. This is a second-generation FSx for ONTAP file system.

For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing a file system deployment type.

Required: Yes

Type: String

Allowed values: MULTI_AZ_1 | SINGLE_AZ_1 | SINGLE_AZ_2 | MULTI_AZ_2

Update requires: Replacement

DiskIopsConfiguration

The SSD IOPS configuration for the FSx for ONTAP file system.

Required: No

Type: DiskIopsConfiguration

Update requires: No interruption

EndpointIpAddressRange

(Multi-AZ only) Specifies the IP address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API, Amazon FSx selects an unused IP address range for you from the 198.19.* range. By default in the Amazon FSx console, Amazon FSx chooses the last 64 IP addresses from the VPC’s primary CIDR range to use as the endpoint IP address range for the file system. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables, as long as they don't overlap with any subnet.

Required: No

Type: String

Pattern: ^[^\u0000\u0085\u2028\u2029\r\n]{9,17}$

Minimum: 9

Maximum: 17

Update requires: Replacement

FsxAdminPassword

The ONTAP administrative password for the fsxadmin user with which you administer your file system using the NetApp ONTAP CLI and REST API.

Required: No

Type: String

Pattern: ^[^\u0000\u0085\u2028\u2029\r\n]{8,50}$

Minimum: 8

Maximum: 50

Update requires: No interruption

HAPairs

Specifies how many high-availability (HA) pairs of file servers will power your file system. First-generation file systems are powered by 1 HA pair. Second-generation multi-AZ file systems are powered by 1 HA pair. Second generation single-AZ file systems are powered by up to 12 HA pairs. The default value is 1. The value of this property affects the values of StorageCapacity, Iops, and ThroughputCapacity. For more information, see High-availability (HA) pairs in the FSx for ONTAP user guide. Block storage protocol support (iSCSI and NVMe over TCP) is disabled on file systems with more than 6 HA pairs. For more information, see Using block storage protocols.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of HAPairs is less than 1 or greater than 12.

  • The value of HAPairs is greater than 1 and the value of DeploymentType is SINGLE_AZ_1, MULTI_AZ_1, or MULTI_AZ_2.

Required: No

Type: Integer

Minimum: 1

Maximum: 12

Update requires: No interruption

PreferredSubnetId

Required when DeploymentType is set to MULTI_AZ_1 or MULTI_AZ_2. This specifies the subnet in which you want the preferred file server to be located.

Required: No

Type: String

Update requires: Replacement

RouteTableIds

(Multi-AZ only) Specifies the route tables in which Amazon FSx creates the rules for routing traffic to the correct file server. You should specify all virtual private cloud (VPC) route tables associated with the subnets in which your clients are located. By default, Amazon FSx selects your VPC's default route table.

Note

Amazon FSx manages these route tables for Multi-AZ file systems using tag-based authentication. These route tables are tagged with Key: AmazonFSx; Value: ManagedByAmazonFSx. When creating FSx for ONTAP Multi-AZ file systems using AWS CloudFormation we recommend that you add the Key: AmazonFSx; Value: ManagedByAmazonFSx tag manually.

Required: No

Type: Array of String

Maximum: 50

Update requires: No interruption

ThroughputCapacity

Sets the throughput capacity for the file system that you're creating in megabytes per second (MBps). For more information, see Managing throughput capacity in the FSx for ONTAP User Guide.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of ThroughputCapacity and ThroughputCapacityPerHAPair are not the same value.

  • The value of ThroughputCapacity when divided by the value of HAPairs is outside of the valid range for ThroughputCapacity.

Required: No

Type: Integer

Minimum: 8

Maximum: 100000

Update requires: No interruption

ThroughputCapacityPerHAPair

Use to choose the throughput capacity per HA pair, rather than the total throughput for the file system.

You can define either the ThroughputCapacityPerHAPair or the ThroughputCapacity when creating a file system, but not both.

This field and ThroughputCapacity are the same for file systems powered by one HA pair.

  • For SINGLE_AZ_1 and MULTI_AZ_1 file systems, valid values are 128, 256, 512, 1024, 2048, or 4096 MBps.

  • For SINGLE_AZ_2, valid values are 1536, 3072, or 6144 MBps.

  • For MULTI_AZ_2, valid values are 384, 768, 1536, 3072, or 6144 MBps.

Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions:

  • The value of ThroughputCapacity and ThroughputCapacityPerHAPair are not the same value for file systems with one HA pair.

  • The value of deployment type is SINGLE_AZ_2 and ThroughputCapacity / ThroughputCapacityPerHAPair is not a valid HA pair (a value between 1 and 12).

  • The value of ThroughputCapacityPerHAPair is not a valid value.

Required: No

Type: Integer

Minimum: 128

Maximum: 6144

Update requires: No interruption

WeeklyMaintenanceStartTime

A recurring weekly time, in the format D:HH:MM.

D is the day of the week, for which 1 represents Monday and 7 represents Sunday. For further details, see the ISO-8601 spec as described on Wikipedia.

HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour.

For example, 1:05:00 specifies maintenance at 5 AM Monday.

Required: No

Type: String

Update requires: No interruption

隐私网站条款Cookie 首选项
© 2025, Amazon Web Services, Inc. 或其附属公司。保留所有权利。