Class EcsClient
Client to interact with Amazon EC2 Container Service
- Guzzle\Common\AbstractHasDispatcher implements Guzzle\Common\HasDispatcherInterface
-
Guzzle\Http\Client implements Guzzle\Http\ClientInterface
-
Guzzle\Service\Client implements Guzzle\Service\ClientInterface
-
Aws\Common\Client\AbstractClient implements Aws\Common\Client\AwsClientInterface
-
Aws\Ecs\EcsClient
Methods summary
-
public static
factory ( array|Collection $config = array() )
Factory method to create a new Amazon EC2 Container Service client using an array of configuration options.
-
public
createCluster ( array $args = array() )
Executes the CreateCluster operation.
-
public
createService ( array $args = array() )
Executes the CreateService operation.
-
public
deleteCluster ( array $args = array() )
Executes the DeleteCluster operation.
-
public
deleteService ( array $args = array() )
Executes the DeleteService operation.
-
public
deregisterContainerInstance ( array $args = array() )
Executes the DeregisterContainerInstance operation.
-
public
deregisterTaskDefinition ( array $args = array() )
Executes the DeregisterTaskDefinition operation.
-
public
describeClusters ( array $args = array() )
Executes the DescribeClusters operation.
-
public
describeContainerInstances ( array $args = array() )
Executes the DescribeContainerInstances operation.
-
public
describeServices ( array $args = array() )
Executes the DescribeServices operation.
-
public
describeTaskDefinition ( array $args = array() )
Executes the DescribeTaskDefinition operation.
-
public
describeTasks ( array $args = array() )
Executes the DescribeTasks operation.
-
public
discoverPollEndpoint ( array $args = array() )
Executes the DiscoverPollEndpoint operation.
-
public
listClusters ( array $args = array() )
Executes the ListClusters operation.
-
public
listContainerInstances ( array $args = array() )
Executes the ListContainerInstances operation.
-
public
listServices ( array $args = array() )
Executes the ListServices operation.
-
public
listTaskDefinitionFamilies ( array $args = array() )
Executes the ListTaskDefinitionFamilies operation.
-
public
listTaskDefinitions ( array $args = array() )
Executes the ListTaskDefinitions operation.
-
public
listTasks ( array $args = array() )
Executes the ListTasks operation.
-
public
registerContainerInstance ( array $args = array() )
Executes the RegisterContainerInstance operation.
-
public
registerTaskDefinition ( array $args = array() )
Executes the RegisterTaskDefinition operation.
-
public
runTask ( array $args = array() )
Executes the RunTask operation.
-
public
startTask ( array $args = array() )
Executes the StartTask operation.
-
public
stopTask ( array $args = array() )
Executes the StopTask operation.
-
public
submitContainerStateChange ( array $args = array() )
Executes the SubmitContainerStateChange operation.
-
public
submitTaskStateChange ( array $args = array() )
Executes the SubmitTaskStateChange operation.
-
public
updateContainerAgent ( array $args = array() )
Executes the UpdateContainerAgent operation.
-
public
updateService ( array $args = array() )
Executes the UpdateService operation.
-
public
getListClustersIterator ( array $args = array() )
The input array uses the parameters of the ListClusters operation
-
public
getListContainerInstancesIterator ( array $args = array() )
The input array uses the parameters of the ListContainerInstances operation
-
public
getListTaskDefinitionsIterator ( array $args = array() )
The input array uses the parameters of the ListTaskDefinitions operation
-
public
getListTaskDefinitionFamiliesIterator ( array $args = array() )
The input array uses the parameters of the ListTaskDefinitionFamilies operation
-
public
getListTasksIterator ( array $args = array() )
The input array uses the parameters of the ListTasks operation
-
public
getListServicesIterator ( array $args = array() )
The input array uses the parameters of the ListServices operation
Methods detail
Factory method to create a new Amazon EC2 Container Service client using an array of configuration options.
See http://docs.aws.amazon.com/aws-sdk-php/v2/guide/configuration.html#client-configuration-options
Parameters
- $config
array|
Guzzle\Common\Collection
$config Client configuration data
Returns
Link
Overrides
Executes the CreateCluster operation.
Creates a new Amazon ECS cluster. By default, your account receives a
Examples
- Basic formatting example
$result = $client->createCluster(array( 'clusterName' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
clusterName => (string)The name of your cluster. If you do not specify a name for your cluster, you create a cluster named default. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
cluster => (associative-array)The full description of your new cluster.
-
clusterArn => (string)The Amazon Resource Name (ARN) that identifies the cluster. The ARN contains the arn:aws:ecs namespace, followed by the region of the cluster, the AWS account ID of the cluster owner, the cluster namespace, and then the cluster name. For example, arn:aws:ecs:region:&example-aws-account-id;:cluster/test.
-
clusterName => (string)A user-generated string that you use to identify your cluster.
-
status => (string)The status of the cluster. The valid values are ACTIVE or INACTIVE. ACTIVE indicates that you can register container instances with the cluster and the associated instances can accept tasks.
-
registeredContainerInstancesCount => (int)The number of container instances registered into the cluster.
-
runningTasksCount => (int)The number of tasks in the cluster that are in the RUNNING state.
-
pendingTasksCount => (int)The number of tasks in the cluster that are in the PENDING state.
-
activeServicesCount => (int)The number of services that are running on the cluster in an ACTIVE state. You can view these services with ListServices.
-
Executes the CreateService operation.
Runs and maintains a desired number of tasks from a specified task
definition. If the number of tasks running in a service drops below
Examples
- Basic formatting example
$result = $client->createService(array( 'cluster' => 'string', // serviceName is required 'serviceName' => 'string', // taskDefinition is required 'taskDefinition' => 'string', 'loadBalancers' => array( array( 'loadBalancerName' => 'string', 'containerName' => 'string', 'containerPort' => integer, ), // ... repeated ), // desiredCount is required 'desiredCount' => integer, 'clientToken' => 'string', 'role' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster on which to run your service. If you do not specify a cluster, the default cluster is assumed.
-
serviceName => (string)The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a region or across multiple regions.
-
taskDefinition => (string)The family and revision (family:revision) or full Amazon Resource Name (ARN) of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used.
-
loadBalancers => (array<associative-array>)A list of load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
- (associative-array)
Details on a load balancer that is used with a service.
-
loadBalancerName => (string)The name of the load balancer.
-
containerName => (string)The name of the container to associate with the load balancer.
-
containerPort => (int)The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
-
- (associative-array)
-
desiredCount => (int)The number of instantiations of the specified task definition to place and keep running on your cluster.
-
clientToken => (string)Unique, case-sensitive identifier you provide to ensure the idempotency of the request. Up to 32 ASCII characters are allowed.
-
role => (string)The name or full Amazon Resource Name (ARN) of the IAM role that allows your Amazon ECS container agent to make calls to your load balancer on your behalf. This parameter is only required if you are using a load balancer with your service.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
service => (associative-array)The full description of your service following the create call.
-
serviceArn => (string)The Amazon Resource Name (ARN) that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:&example-aws-account-id;:service/my-service.
-
serviceName => (string)A user-generated string that you can use to identify your service.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the service.
-
loadBalancers => (array<associative-array>)A list of load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
- (associative-array)
Details on a load balancer that is used with a service.
-
loadBalancerName => (string)The name of the load balancer.
-
containerName => (string)The name of the container to associate with the load balancer.
-
containerPort => (int)The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
-
- (associative-array)
-
status => (string)The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
-
desiredCount => (int)The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
runningCount => (int)The number of tasks in the cluster that are in the RUNNING state.
-
pendingCount => (int)The number of tasks in the cluster that are in the PENDING state.
-
taskDefinition => (string)The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
deployments => (array<associative-array>)The current state of deployments for the service.
- (associative-array)
The details of an Amazon ECS service deployment.
-
id => (string)The ID of the deployment.
-
status => (string)The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
-
taskDefinition => (string)The most recent task definition that was specified for the service to use.
-
desiredCount => (int)The most recent desired count of tasks that was specified for the service to deploy or maintain.
-
pendingCount => (int)The number of tasks in the deployment that are in the PENDING status.
-
runningCount => (int)The number of tasks in the deployment that are in the RUNNING status.
-
createdAt => (string)The Unix time in seconds and milliseconds when the service was created.
-
updatedAt => (string)The Unix time in seconds and milliseconds when the service was last updated.
-
- (associative-array)
-
roleArn => (string)The Amazon Resource Name (ARN) of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with a load balancer.
-
events => (array<associative-array>)The event stream for your service. A maximum of 100 of the latest events are displayed.
- (associative-array)
Details on an event associated with a service.
-
id => (string)The ID string of the event.
-
createdAt => (string)The Unix time in seconds and milliseconds when the event was triggered.
-
message => (string)The event message.
-
- (associative-array)
-
Executes the DeleteCluster operation.
Deletes the specified cluster. You must deregister all container instances from this cluster before you may delete it. You can list the container instances in a cluster with ListContainerInstances and deregister them with DeregisterContainerInstance.
Examples
- Basic formatting example
$result = $client->deleteCluster(array( // cluster is required 'cluster' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster to delete.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
cluster => (associative-array)The full description of the deleted cluster.
-
clusterArn => (string)The Amazon Resource Name (ARN) that identifies the cluster. The ARN contains the arn:aws:ecs namespace, followed by the region of the cluster, the AWS account ID of the cluster owner, the cluster namespace, and then the cluster name. For example, arn:aws:ecs:region:&example-aws-account-id;:cluster/test.
-
clusterName => (string)A user-generated string that you use to identify your cluster.
-
status => (string)The status of the cluster. The valid values are ACTIVE or INACTIVE. ACTIVE indicates that you can register container instances with the cluster and the associated instances can accept tasks.
-
registeredContainerInstancesCount => (int)The number of container instances registered into the cluster.
-
runningTasksCount => (int)The number of tasks in the cluster that are in the RUNNING state.
-
pendingTasksCount => (int)The number of tasks in the cluster that are in the PENDING state.
-
activeServicesCount => (int)The number of services that are running on the cluster in an ACTIVE state. You can view these services with ListServices.
-
Executes the DeleteService operation.
Deletes a specified service within a cluster.
Examples
- Basic formatting example
$result = $client->deleteService(array( 'cluster' => 'string', // service is required 'service' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The name of the cluster that hosts the service to delete. If you do not specify a cluster, the default cluster is assumed.
-
service => (string)The name of the service to delete.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
service => (associative-array)The full description of the deleted service.
-
serviceArn => (string)The Amazon Resource Name (ARN) that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:&example-aws-account-id;:service/my-service.
-
serviceName => (string)A user-generated string that you can use to identify your service.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the service.
-
loadBalancers => (array<associative-array>)A list of load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
- (associative-array)
Details on a load balancer that is used with a service.
-
loadBalancerName => (string)The name of the load balancer.
-
containerName => (string)The name of the container to associate with the load balancer.
-
containerPort => (int)The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
-
- (associative-array)
-
status => (string)The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
-
desiredCount => (int)The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
runningCount => (int)The number of tasks in the cluster that are in the RUNNING state.
-
pendingCount => (int)The number of tasks in the cluster that are in the PENDING state.
-
taskDefinition => (string)The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
deployments => (array<associative-array>)The current state of deployments for the service.
- (associative-array)
The details of an Amazon ECS service deployment.
-
id => (string)The ID of the deployment.
-
status => (string)The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
-
taskDefinition => (string)The most recent task definition that was specified for the service to use.
-
desiredCount => (int)The most recent desired count of tasks that was specified for the service to deploy or maintain.
-
pendingCount => (int)The number of tasks in the deployment that are in the PENDING status.
-
runningCount => (int)The number of tasks in the deployment that are in the RUNNING status.
-
createdAt => (string)The Unix time in seconds and milliseconds when the service was created.
-
updatedAt => (string)The Unix time in seconds and milliseconds when the service was last updated.
-
- (associative-array)
-
roleArn => (string)The Amazon Resource Name (ARN) of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with a load balancer.
-
events => (array<associative-array>)The event stream for your service. A maximum of 100 of the latest events are displayed.
- (associative-array)
Details on an event associated with a service.
-
id => (string)The ID string of the event.
-
createdAt => (string)The Unix time in seconds and milliseconds when the event was triggered.
-
message => (string)The event message.
-
- (associative-array)
-
Executes the DeregisterContainerInstance operation.
Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.
If you intend to use the container instance for some other purpose after deregistration, you should stop all of the tasks running on the container instance before deregistration to avoid any orphaned tasks from consuming resources.
Deregistering a container instance removes the instance from a cluster, but it does not terminate the EC2 instance; if you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.
When you terminate a container instance, it is automatically deregistered from your cluster.
Examples
- Basic formatting example
$result = $client->deregisterContainerInstance(array( 'cluster' => 'string', // containerInstance is required 'containerInstance' => 'string', 'force' => true || false, ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instance to deregister. If you do not specify a cluster, the default cluster is assumed.
-
containerInstance => (string)The container instance ID or full Amazon Resource Name (ARN) of the container instance to deregister. The ARN contains the arn:aws:ecs namespace, followed by the region of the container instance, the AWS account ID of the container instance owner, the container-instance namespace, and then the container instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
-
force => (bool)Forces the deregistration of the container instance. If you have tasks running on the container instance when you deregister it with the force option, these tasks remain running and they continue to pass Elastic Load Balancing load balancer health checks until you terminate the instance or the tasks stop through some other means, but they are orphaned (no longer monitored or accounted for by Amazon ECS). If an orphaned task on your container instance is part of an Amazon ECS service, then the service scheduler starts another copy of that task, on a different container instance if possible.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
containerInstance => (associative-array)An EC2 instance that is running the Amazon ECS agent and has been registered with a cluster.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instance. The ARN contains the arn:aws:ecs namespace, followed by the region of the container instance, the AWS account ID of the container instance owner, the container-instance namespace, and then the container instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
-
ec2InstanceId => (string)The EC2 instance ID of the container instance.
-
versionInfo => (associative-array)The version information for the Amazon ECS container agent and Docker daemon running on the container instance.
-
agentVersion => (string)The version number of the Amazon ECS container agent.
-
agentHash => (string)The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent GitHub repository.
-
dockerVersion => (string)The Docker version running on the container instance.
-
-
remainingResources => (array<associative-array>)The remaining resources of the container instance that are available for new tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
registeredResources => (array<associative-array>)The registered resources on the container instance that are in use by current tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
status => (string)The status of the container instance. The valid values are ACTIVE or INACTIVE. ACTIVE indicates that the container instance can accept tasks.
-
agentConnected => (bool)This parameter returns true if the agent is actually connected to Amazon ECS. Registered instances with an agent that may be unhealthy or stopped return false, and instances without a connected agent cannot accept placement requests.
-
runningTasksCount => (int)The number of tasks on the container instance that are in the RUNNING status.
-
pendingTasksCount => (int)The number of tasks on the container instance that are in the PENDING status.
-
agentUpdateStatus => (string)The status of the most recent agent update. If an update has never been requested, this value is NULL.
-
attributes => (array<associative-array>)The attributes set for the container instance by the Amazon ECS container agent at instance registration.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
Executes the DeregisterTaskDefinition operation.
Deregisters the specified task definition by family and revision. Upon
deregistration, the task definition is marked as
You cannot use an
Examples
- Basic formatting example
$result = $client->deregisterTaskDefinition(array( // taskDefinition is required 'taskDefinition' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
taskDefinition => (string)The family and revision (family:revision) or full Amazon Resource Name (ARN) of the task definition to deregister. You must specify a revision.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
taskDefinition => (associative-array)The full description of the deregistered task.
-
taskDefinitionArn => (string)The full Amazon Resource Name (ARN) of the of the task definition.
-
containerDefinitions => (array<associative-array>)A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon EC2 Container Service Developer Guide.
- (associative-array)
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
-
name => (string)The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run.
-
image => (string)The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with repository-url/image:tag. Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run.
-
cpu => (int)The number of cpu units reserved for the container. A container instance has 1,024 cpu units for every CPU core. This parameter specifies the minimum amount of CPU to reserve for a container, and containers share unallocated CPU units with other containers on the instance with the same ratio as their allocated amount. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run.
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
The Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2; however, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
- Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to 2 CPU shares.
- Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
-
memory => (int)The number of MiB of memory reserved for the container. If your container attempts to exceed the memory allocated here, the container is killed. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run.
-
links => (array<string>)The link parameter allows containers to communicate with each other without the need for port mappings, using the name parameter and optionally, an alias for the link. This construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed for each name and alias. For more information on linking Docker containers, see https://docs.docker.com/userguide/dockerlinks/. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run.
-
portMappings => (array<associative-array>)The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic. This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run.
- (associative-array)
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
containerPort => (int)The port number on the container that is bound to the user-specified or automatically assigned host port. If you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range (for more information, see hostPort).
-
hostPort => (int)The port number on the container instance to reserve for your container. You can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range is 49153 to 65535, and this range is used for Docker versions prior to 1.6.0. For Docker version 1.6.0 and later, the Docker daemon tries to read the ephemeral port range from /proc/sys/net/ipv4/ip_local_port_range; if this kernel parameter is unavailable, the default ephemeral port range is used. You should not attempt to specify a host port in the ephemeral port range, because these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent port 51678. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released).The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output, and a container instance may have up to 50 reserved ports at a time, including the default reserved ports (automatically assigned ports do not count toward this limit).
-
protocol => (string)The protocol used for the port mapping. Valid values are tcp and udp. The default is tcp.
-
- (associative-array)
-
essential => (bool)If the essential parameter of a container is marked as true, the failure of that container stops the task. If the essential parameter of a container is marked as false, then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container.
-
entryPoint => (array<string>)Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint, update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run. For more information, see https://docs.docker.com/reference/builder/#entrypoint.
-
command => (array<string>)The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run. For more information, see https://docs.docker.com/reference/builder/#cmd.
-
environment => (array<associative-array>)The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
mountPoints => (array<associative-array>)The mount points for data volumes in your container. This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run.
- (associative-array)
Details on a volume mount point that is used in a container definition.
-
sourceVolume => (string)The name of the volume to mount.
-
containerPath => (string)The path on the container to mount the host volume at.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
volumesFrom => (array<associative-array>)Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run.
- (associative-array)
Details on a data volume from another container.
-
sourceContainer => (string)The name of the container to mount volumes from.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
hostname => (string)The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run.
-
user => (string)The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run.
-
workingDirectory => (string)The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run.
-
disableNetworking => (bool)When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API.
-
privileged => (bool)When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run.
-
readonlyRootFilesystem => (bool)When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run.
-
dnsServers => (array<string>)A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run.
-
dnsSearchDomains => (array<string>)A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run.
-
extraHosts => (array<associative-array>)A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run.
- (associative-array)
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition.
-
hostname => (string)The hostname to use in the /etc/hosts entry.
-
ipAddress => (string)The IP address to use in the /etc/hosts entry.
-
- (associative-array)
-
dockerSecurityOptions => (array<string>)A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run.
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
dockerLabels => (associative-array<string>)Associative array of <string> keys mapping to (string) values. Each array key should be changed to an appropriate <string>.
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<string> => (string)
-
-
ulimits => (array<associative-array>)A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run. Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
- (associative-array)
The ulimit settings to pass to the container.
-
name => (string)The type of the ulimit.
-
softLimit => (int)The soft limit for the ulimit type.
-
hardLimit => (int)The hard limit for the ulimit type.
-
- (associative-array)
-
logConfiguration => (associative-array)The log configuration specification for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run. Valid log drivers are displayed in the LogConfiguration data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
logDriver => (string)The log driver to use for the container. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
options => (associative-array<string>)Associative array of <string> keys mapping to (string) values. Each array key should be changed to an appropriate <string>.
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<string> => (string)
-
-
-
- (associative-array)
-
family => (string)The family of your task definition, used as the definition name.
-
revision => (int)The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is 1; each time you register a new revision of a task definition in the same family, the revision value always increases by one (even if you have deregistered previous revisions in this family).
-
volumes => (array<associative-array>)The list of volumes in a task. For more information about volume definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon EC2 Container Service Developer Guide.
- (associative-array)
A data volume used in a task definition.
-
name => (string)The name of the volume. This name is referenced in the sourceVolume parameter of container definition mountPoints.
-
host => (associative-array)The path on the host container instance that is presented to the containers which access the volume. If this parameter is empty, then the Docker daemon assigns a host path for you.
-
sourcePath => (string)The path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you.
-
-
- (associative-array)
-
status => (string)The status of the task definition.
-
requiresAttributes => (array<associative-array>)The container instance attributes required by your task.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
Executes the DescribeClusters operation.
Describes one or more of your clusters.
Examples
- Basic formatting example
$result = $client->describeClusters(array( 'clusters' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
clusters => (array<string>)A space-separated list of cluster names or full cluster Amazon Resource Name (ARN) entries. If you do not specify a cluster, the default cluster is assumed.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
clusters => (array<associative-array>)The list of clusters.
- (associative-array)
A regional grouping of one or more container instances on which you can run task requests. Each account receives a default cluster the first time you use the Amazon ECS service, but you may also create other clusters. Clusters may contain more than one instance type simultaneously.
-
clusterArn => (string)The Amazon Resource Name (ARN) that identifies the cluster. The ARN contains the arn:aws:ecs namespace, followed by the region of the cluster, the AWS account ID of the cluster owner, the cluster namespace, and then the cluster name. For example, arn:aws:ecs:region:&example-aws-account-id;:cluster/test.
-
clusterName => (string)A user-generated string that you use to identify your cluster.
-
status => (string)The status of the cluster. The valid values are ACTIVE or INACTIVE. ACTIVE indicates that you can register container instances with the cluster and the associated instances can accept tasks.
-
registeredContainerInstancesCount => (int)The number of container instances registered into the cluster.
-
runningTasksCount => (int)The number of tasks in the cluster that are in the RUNNING state.
-
pendingTasksCount => (int)The number of tasks in the cluster that are in the PENDING state.
-
activeServicesCount => (int)The number of services that are running on the cluster in an ACTIVE state. You can view these services with ListServices.
-
- (associative-array)
-
failures => (array<associative-array>)Any failures associated with the call.
- (associative-array)
A failed resource.
-
arn => (string)The Amazon Resource Name (ARN) of the failed resource.
-
reason => (string)The reason for the failure.
-
- (associative-array)
Executes the DescribeContainerInstances operation.
Describes Amazon EC2 Container Service container instances. Returns metadata about registered and remaining resources on each container instance requested.
Examples
- Basic formatting example
$result = $client->describeContainerInstances(array( 'cluster' => 'string', // containerInstances is required 'containerInstances' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instances to describe. If you do not specify a cluster, the default cluster is assumed.
-
containerInstances => (array<string>)A space-separated list of container instance IDs or full Amazon Resource Name (ARN) entries.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
containerInstances => (array<associative-array>)The list of container instances.
- (associative-array)
An EC2 instance that is running the Amazon ECS agent and has been registered with a cluster.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instance. The ARN contains the arn:aws:ecs namespace, followed by the region of the container instance, the AWS account ID of the container instance owner, the container-instance namespace, and then the container instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
-
ec2InstanceId => (string)The EC2 instance ID of the container instance.
-
versionInfo => (associative-array)The version information for the Amazon ECS container agent and Docker daemon running on the container instance.
-
agentVersion => (string)The version number of the Amazon ECS container agent.
-
agentHash => (string)The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent GitHub repository.
-
dockerVersion => (string)The Docker version running on the container instance.
-
-
remainingResources => (array<associative-array>)The remaining resources of the container instance that are available for new tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
registeredResources => (array<associative-array>)The registered resources on the container instance that are in use by current tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
status => (string)The status of the container instance. The valid values are ACTIVE or INACTIVE. ACTIVE indicates that the container instance can accept tasks.
-
agentConnected => (bool)This parameter returns true if the agent is actually connected to Amazon ECS. Registered instances with an agent that may be unhealthy or stopped return false, and instances without a connected agent cannot accept placement requests.
-
runningTasksCount => (int)The number of tasks on the container instance that are in the RUNNING status.
-
pendingTasksCount => (int)The number of tasks on the container instance that are in the PENDING status.
-
agentUpdateStatus => (string)The status of the most recent agent update. If an update has never been requested, this value is NULL.
-
attributes => (array<associative-array>)The attributes set for the container instance by the Amazon ECS container agent at instance registration.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
- (associative-array)
-
failures => (array<associative-array>)Any failures associated with the call.
- (associative-array)
A failed resource.
-
arn => (string)The Amazon Resource Name (ARN) of the failed resource.
-
reason => (string)The reason for the failure.
-
- (associative-array)
Executes the DescribeServices operation.
Describes the specified services running in your cluster.
Examples
- Basic formatting example
$result = $client->describeServices(array( 'cluster' => 'string', // services is required 'services' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The name of the cluster that hosts the service to describe. If you do not specify a cluster, the default cluster is assumed.
-
services => (array<string>)A list of services to describe.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
services => (array<associative-array>)The list of services described.
- (associative-array)
Details on a service within a cluster
-
serviceArn => (string)The Amazon Resource Name (ARN) that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:&example-aws-account-id;:service/my-service.
-
serviceName => (string)A user-generated string that you can use to identify your service.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the service.
-
loadBalancers => (array<associative-array>)A list of load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
- (associative-array)
Details on a load balancer that is used with a service.
-
loadBalancerName => (string)The name of the load balancer.
-
containerName => (string)The name of the container to associate with the load balancer.
-
containerPort => (int)The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
-
- (associative-array)
-
status => (string)The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
-
desiredCount => (int)The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
runningCount => (int)The number of tasks in the cluster that are in the RUNNING state.
-
pendingCount => (int)The number of tasks in the cluster that are in the PENDING state.
-
taskDefinition => (string)The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
deployments => (array<associative-array>)The current state of deployments for the service.
- (associative-array)
The details of an Amazon ECS service deployment.
-
id => (string)The ID of the deployment.
-
status => (string)The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
-
taskDefinition => (string)The most recent task definition that was specified for the service to use.
-
desiredCount => (int)The most recent desired count of tasks that was specified for the service to deploy or maintain.
-
pendingCount => (int)The number of tasks in the deployment that are in the PENDING status.
-
runningCount => (int)The number of tasks in the deployment that are in the RUNNING status.
-
createdAt => (string)The Unix time in seconds and milliseconds when the service was created.
-
updatedAt => (string)The Unix time in seconds and milliseconds when the service was last updated.
-
- (associative-array)
-
roleArn => (string)The Amazon Resource Name (ARN) of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with a load balancer.
-
events => (array<associative-array>)The event stream for your service. A maximum of 100 of the latest events are displayed.
- (associative-array)
Details on an event associated with a service.
-
id => (string)The ID string of the event.
-
createdAt => (string)The Unix time in seconds and milliseconds when the event was triggered.
-
message => (string)The event message.
-
- (associative-array)
-
- (associative-array)
-
failures => (array<associative-array>)Any failures associated with the call.
- (associative-array)
A failed resource.
-
arn => (string)The Amazon Resource Name (ARN) of the failed resource.
-
reason => (string)The reason for the failure.
-
- (associative-array)
Executes the DescribeTaskDefinition operation.
Describes a task definition. You can specify a
You can only describe
Examples
- Basic formatting example
$result = $client->describeTaskDefinition(array( // taskDefinition is required 'taskDefinition' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
taskDefinition => (string)The family for the latest ACTIVE revision, family and revision (family:revision) for a specific revision in the family, or full Amazon Resource Name (ARN) of the task definition to describe.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
taskDefinition => (associative-array)The full task definition description.
-
taskDefinitionArn => (string)The full Amazon Resource Name (ARN) of the of the task definition.
-
containerDefinitions => (array<associative-array>)A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon EC2 Container Service Developer Guide.
- (associative-array)
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
-
name => (string)The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run.
-
image => (string)The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with repository-url/image:tag. Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run.
-
cpu => (int)The number of cpu units reserved for the container. A container instance has 1,024 cpu units for every CPU core. This parameter specifies the minimum amount of CPU to reserve for a container, and containers share unallocated CPU units with other containers on the instance with the same ratio as their allocated amount. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run.
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
The Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2; however, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
- Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to 2 CPU shares.
- Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
-
memory => (int)The number of MiB of memory reserved for the container. If your container attempts to exceed the memory allocated here, the container is killed. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run.
-
links => (array<string>)The link parameter allows containers to communicate with each other without the need for port mappings, using the name parameter and optionally, an alias for the link. This construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed for each name and alias. For more information on linking Docker containers, see https://docs.docker.com/userguide/dockerlinks/. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run.
-
portMappings => (array<associative-array>)The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic. This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run.
- (associative-array)
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
containerPort => (int)The port number on the container that is bound to the user-specified or automatically assigned host port. If you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range (for more information, see hostPort).
-
hostPort => (int)The port number on the container instance to reserve for your container. You can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range is 49153 to 65535, and this range is used for Docker versions prior to 1.6.0. For Docker version 1.6.0 and later, the Docker daemon tries to read the ephemeral port range from /proc/sys/net/ipv4/ip_local_port_range; if this kernel parameter is unavailable, the default ephemeral port range is used. You should not attempt to specify a host port in the ephemeral port range, because these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent port 51678. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released).The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output, and a container instance may have up to 50 reserved ports at a time, including the default reserved ports (automatically assigned ports do not count toward this limit).
-
protocol => (string)The protocol used for the port mapping. Valid values are tcp and udp. The default is tcp.
-
- (associative-array)
-
essential => (bool)If the essential parameter of a container is marked as true, the failure of that container stops the task. If the essential parameter of a container is marked as false, then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container.
-
entryPoint => (array<string>)Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint, update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run. For more information, see https://docs.docker.com/reference/builder/#entrypoint.
-
command => (array<string>)The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run. For more information, see https://docs.docker.com/reference/builder/#cmd.
-
environment => (array<associative-array>)The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
mountPoints => (array<associative-array>)The mount points for data volumes in your container. This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run.
- (associative-array)
Details on a volume mount point that is used in a container definition.
-
sourceVolume => (string)The name of the volume to mount.
-
containerPath => (string)The path on the container to mount the host volume at.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
volumesFrom => (array<associative-array>)Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run.
- (associative-array)
Details on a data volume from another container.
-
sourceContainer => (string)The name of the container to mount volumes from.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
hostname => (string)The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run.
-
user => (string)The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run.
-
workingDirectory => (string)The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run.
-
disableNetworking => (bool)When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API.
-
privileged => (bool)When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run.
-
readonlyRootFilesystem => (bool)When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run.
-
dnsServers => (array<string>)A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run.
-
dnsSearchDomains => (array<string>)A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run.
-
extraHosts => (array<associative-array>)A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run.
- (associative-array)
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition.
-
hostname => (string)The hostname to use in the /etc/hosts entry.
-
ipAddress => (string)The IP address to use in the /etc/hosts entry.
-
- (associative-array)
-
dockerSecurityOptions => (array<string>)A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run.
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
dockerLabels => (associative-array<string>)Associative array of <string> keys mapping to (string) values. Each array key should be changed to an appropriate <string>.
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<string> => (string)
-
-
ulimits => (array<associative-array>)A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run. Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
- (associative-array)
The ulimit settings to pass to the container.
-
name => (string)The type of the ulimit.
-
softLimit => (int)The soft limit for the ulimit type.
-
hardLimit => (int)The hard limit for the ulimit type.
-
- (associative-array)
-
logConfiguration => (associative-array)The log configuration specification for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run. Valid log drivers are displayed in the LogConfiguration data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
logDriver => (string)The log driver to use for the container. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
options => (associative-array<string>)Associative array of <string> keys mapping to (string) values. Each array key should be changed to an appropriate <string>.
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<string> => (string)
-
-
-
- (associative-array)
-
family => (string)The family of your task definition, used as the definition name.
-
revision => (int)The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is 1; each time you register a new revision of a task definition in the same family, the revision value always increases by one (even if you have deregistered previous revisions in this family).
-
volumes => (array<associative-array>)The list of volumes in a task. For more information about volume definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon EC2 Container Service Developer Guide.
- (associative-array)
A data volume used in a task definition.
-
name => (string)The name of the volume. This name is referenced in the sourceVolume parameter of container definition mountPoints.
-
host => (associative-array)The path on the host container instance that is presented to the containers which access the volume. If this parameter is empty, then the Docker daemon assigns a host path for you.
-
sourcePath => (string)The path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you.
-
-
- (associative-array)
-
status => (string)The status of the task definition.
-
requiresAttributes => (array<associative-array>)The container instance attributes required by your task.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
Executes the DescribeTasks operation.
Describes a specified task or tasks.
Examples
- Basic formatting example
$result = $client->describeTasks(array( 'cluster' => 'string', // tasks is required 'tasks' => array('string', ... ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task to describe. If you do not specify a cluster, the default cluster is assumed.
-
tasks => (array<string>)A space-separated list of task IDs or full Amazon Resource Name (ARN) entries.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
tasks => (array<associative-array>)The list of tasks.
- (associative-array)
Details on a task in a cluster.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the task.
-
taskDefinitionArn => (string)The Amazon Resource Name (ARN) of the of the task definition that creates the task.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instances that host the task.
-
overrides => (associative-array)One or more container overrides.
-
containerOverrides => (array<associative-array>)One or more container overrides sent to a task.
- (associative-array)
The overrides that should be sent to a container.
-
name => (string)The name of the container that receives the override.
-
command => (array<string>)The command to send to the container that overrides the default command from the Docker image or the task definition.
-
environment => (array<associative-array>)The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
- (associative-array)
-
-
lastStatus => (string)The last known status of the task.
-
desiredStatus => (string)The desired status of the task.
-
containers => (array<associative-array>)The containers associated with the task.
- (associative-array)
A Docker container that is part of a task.
-
containerArn => (string)The Amazon Resource Name (ARN) of the container.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
name => (string)The name of the container.
-
lastStatus => (string)The last known status of the container.
-
exitCode => (int)The exit code returned from the container.
-
reason => (string)A short (255 max characters) human-readable string to provide additional detail about a running or stopped container.
-
networkBindings => (array<associative-array>)The network bindings associated with the container.
- (associative-array)
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
bindIP => (string)The IP address that the container is bound to on the container instance.
-
containerPort => (int)The port number on the container that is be used with the network binding.
-
hostPort => (int)The port number on the host that is used with the network binding.
-
protocol => (string)The protocol used for the network binding.
-
- (associative-array)
-
- (associative-array)
-
startedBy => (string)The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
-
- (associative-array)
-
failures => (array<associative-array>)Any failures associated with the call.
- (associative-array)
A failed resource.
-
arn => (string)The Amazon Resource Name (ARN) of the failed resource.
-
reason => (string)The reason for the failure.
-
- (associative-array)
Executes the DiscoverPollEndpoint operation.
This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.
Returns an endpoint for the Amazon EC2 Container Service agent to poll for updates.
Examples
- Basic formatting example
$result = $client->discoverPollEndpoint(array( 'containerInstance' => 'string', 'cluster' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
containerInstance => (string)The container instance ID or full Amazon Resource Name (ARN) of the container instance. The ARN contains the arn:aws:ecs namespace, followed by the region of the container instance, the AWS account ID of the container instance owner, the container-instance namespace, and then the container instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
-
cluster => (string)The cluster that the container instance belongs to.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
endpoint => (string)The endpoint for the Amazon ECS agent to poll.
-
telemetryEndpoint => (string)The telemetry endpoint for the Amazon ECS agent.
Executes the ListClusters operation.
Returns a list of existing clusters.
Examples
- Basic formatting example
$result = $client->listClusters(array( 'nextToken' => 'string', 'maxResults' => integer, ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
nextToken => (string)The nextToken value returned from a previous paginated ListClusters request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
-
maxResults => (int)The maximum number of cluster results returned by ListClusters in paginated output. When this parameter is used, ListClusters only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListClusters request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListClusters returns up to 100 results and a nextToken value if applicable.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
clusterArns => (array<string>)The list of full Amazon Resource Name (ARN) entries for each cluster associated with your account.
-
nextToken => (string)The nextToken value to include in a future ListClusters request. When the results of a ListClusters request exceed maxResults, this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
Executes the ListContainerInstances operation.
Returns a list of container instances in a specified cluster.
Examples
- Basic formatting example
$result = $client->listContainerInstances(array( 'cluster' => 'string', 'nextToken' => 'string', 'maxResults' => integer, ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instances to list. If you do not specify a cluster, the default cluster is assumed..
-
nextToken => (string)The nextToken value returned from a previous paginated ListContainerInstances request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
-
maxResults => (int)The maximum number of container instance results returned by ListContainerInstances in paginated output. When this parameter is used, ListContainerInstances only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListContainerInstances request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListContainerInstances returns up to 100 results and a nextToken value if applicable.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
containerInstanceArns => (array<string>)The list of container instances with full Amazon Resource Name (ARN) entries for each container instance associated with the specified cluster.
-
nextToken => (string)The nextToken value to include in a future ListContainerInstances request. When the results of a ListContainerInstances request exceed maxResults, this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
Executes the ListServices operation.
Lists the services that are running in a specified cluster.
Examples
- Basic formatting example
$result = $client->listServices(array( 'cluster' => 'string', 'nextToken' => 'string', 'maxResults' => integer, ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the services to list. If you do not specify a cluster, the default cluster is assumed..
-
nextToken => (string)The nextToken value returned from a previous paginated ListServices request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
-
maxResults => (int)The maximum number of container instance results returned by ListServices in paginated output. When this parameter is used, ListServices only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListServices request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListServices returns up to 100 results and a nextToken value if applicable.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
serviceArns => (array<string>)The list of full Amazon Resource Name (ARN) entries for each service associated with the specified cluster.
-
nextToken => (string)The nextToken value to include in a future ListServices request. When the results of a ListServices request exceed maxResults, this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
Executes the ListTaskDefinitionFamilies operation.
Returns a list of task definition families that are registered to your
account (which may include task definition families that no longer have any
Examples
- Basic formatting example
$result = $client->listTaskDefinitionFamilies(array( 'familyPrefix' => 'string', 'nextToken' => 'string', 'maxResults' => integer, ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
familyPrefix => (string)The familyPrefix is a string that is used to filter the results of ListTaskDefinitionFamilies. If you specify a familyPrefix, only task definition family names that begin with the familyPrefix string are returned.
-
nextToken => (string)The nextToken value returned from a previous paginated ListTaskDefinitionFamilies request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
-
maxResults => (int)The maximum number of task definition family results returned by ListTaskDefinitionFamilies in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitionFamilies request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTaskDefinitionFamilies returns up to 100 results and a nextToken value if applicable.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
families => (array<string>)The list of task definition family names that match the ListTaskDefinitionFamilies request.
-
nextToken => (string)The nextToken value to include in a future ListTaskDefinitionFamilies request. When the results of a ListTaskDefinitionFamilies request exceed maxResults, this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
Executes the ListTaskDefinitions operation.
Returns a list of task definitions that are registered to your account. You
can filter the results by family name with the
Examples
- Basic formatting example
$result = $client->listTaskDefinitions(array( 'familyPrefix' => 'string', 'status' => 'string', 'sort' => 'string', 'nextToken' => 'string', 'maxResults' => integer, ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
familyPrefix => (string)The full family name with which to filter the ListTaskDefinitions results. Specifying a familyPrefix limits the listed task definitions to task definition revisions that belong to that family.
-
status => (string:ACTIVE |INACTIVE )The task definition status with which to filter the ListTaskDefinitions results. By default, only ACTIVE task definitions are listed. By setting this parameter to INACTIVE, you can view task definitions that are INACTIVE as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the status value constant in each subsequent request.
-
sort => (string:ASC |DESC )The order in which to sort the results. Valid values are ASC and DESC. By default (ASC), task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to DESC reverses the sort order on family name and revision so that the newest task definitions in a family are listed first.
-
nextToken => (string)The nextToken value returned from a previous paginated ListTaskDefinitions request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
-
maxResults => (int)The maximum number of task definition results returned by ListTaskDefinitions in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitions request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTaskDefinitions returns up to 100 results and a nextToken value if applicable.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
taskDefinitionArns => (array<string>)The list of task definition Amazon Resource Name (ARN) entries for the ListTaskDefinitions request.
-
nextToken => (string)The nextToken value to include in a future ListTaskDefinitions request. When the results of a ListTaskDefinitions request exceed maxResults, this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
Executes the ListTasks operation.
Returns a list of tasks for a specified cluster. You can filter the results
by family name, by a particular container instance, or by the desired status of
the task with the
Examples
- Basic formatting example
$result = $client->listTasks(array( 'cluster' => 'string', 'containerInstance' => 'string', 'family' => 'string', 'nextToken' => 'string', 'maxResults' => integer, 'startedBy' => 'string', 'serviceName' => 'string', 'desiredStatus' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list. If you do not specify a cluster, the default cluster is assumed..
-
containerInstance => (string)The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results. Specifying a containerInstance limits the results to tasks that belong to that container instance.
-
family => (string)The name of the family with which to filter the ListTasks results. Specifying a family limits the results to tasks that belong to that family.
-
nextToken => (string)The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
-
maxResults => (int)The maximum number of task results returned by ListTasks in paginated output. When this parameter is used, ListTasks only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTasks request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTasks returns up to 100 results and a nextToken value if applicable.
-
startedBy => (string)The startedBy value with which to filter the task results. Specifying a startedBy value limits the results to tasks that were started with that value.
-
serviceName => (string)The name of the service with which to filter the ListTasks results. Specifying a serviceName limits the results to tasks that belong to that service.
-
desiredStatus => (string:RUNNING |PENDING |STOPPED )The task status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that are in the STOPPED status, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
taskArns => (array<string>)The list of task Amazon Resource Name (ARN) entries for the ListTasks request.
-
nextToken => (string)The nextToken value to include in a future ListTasks request. When the results of a ListTasks request exceed maxResults, this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
Executes the RegisterContainerInstance operation.
This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.
Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
Examples
- Basic formatting example
$result = $client->registerContainerInstance(array( 'cluster' => 'string', 'instanceIdentityDocument' => 'string', 'instanceIdentityDocumentSignature' => 'string', 'totalResources' => array( array( '' => array( // Associative array of custom key value pairs ), ), // ... repeated ), 'versionInfo' => array( 'agentVersion' => 'string', 'agentHash' => 'string', 'dockerVersion' => 'string', ), 'containerInstanceArn' => 'string', 'attributes' => array( array( // name is required 'name' => 'string', 'value' => 'string', ), // ... repeated ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster with which to register your container instance. If you do not specify a cluster, the default cluster is assumed..
-
instanceIdentityDocument => (string)The instance identity document for the EC2 instance to register. This document can be found by running the following command from the instance: curl http://169.254.169.254/latest/dynamic/instance-identity/document/
-
instanceIdentityDocumentSignature => (string)The instance identity document signature for the EC2 instance to register. This signature can be found by running the following command from the instance: curl http://169.254.169.254/latest/dynamic/instance-identity/signature/
-
totalResources => (array<associative-array>)The resources available on the instance.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
versionInfo => (associative-array)The version information for the Amazon ECS container agent and Docker daemon running on the container instance.
-
agentVersion => (string)The version number of the Amazon ECS container agent.
-
agentHash => (string)The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent GitHub repository.
-
dockerVersion => (string)The Docker version running on the container instance.
-
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instance (if it was previously registered).
-
attributes => (array<associative-array>)The container instance attributes that this container instance supports.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
containerInstance => (associative-array)An EC2 instance that is running the Amazon ECS agent and has been registered with a cluster.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instance. The ARN contains the arn:aws:ecs namespace, followed by the region of the container instance, the AWS account ID of the container instance owner, the container-instance namespace, and then the container instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
-
ec2InstanceId => (string)The EC2 instance ID of the container instance.
-
versionInfo => (associative-array)The version information for the Amazon ECS container agent and Docker daemon running on the container instance.
-
agentVersion => (string)The version number of the Amazon ECS container agent.
-
agentHash => (string)The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent GitHub repository.
-
dockerVersion => (string)The Docker version running on the container instance.
-
-
remainingResources => (array<associative-array>)The remaining resources of the container instance that are available for new tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
registeredResources => (array<associative-array>)The registered resources on the container instance that are in use by current tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
status => (string)The status of the container instance. The valid values are ACTIVE or INACTIVE. ACTIVE indicates that the container instance can accept tasks.
-
agentConnected => (bool)This parameter returns true if the agent is actually connected to Amazon ECS. Registered instances with an agent that may be unhealthy or stopped return false, and instances without a connected agent cannot accept placement requests.
-
runningTasksCount => (int)The number of tasks on the container instance that are in the RUNNING status.
-
pendingTasksCount => (int)The number of tasks on the container instance that are in the PENDING status.
-
agentUpdateStatus => (string)The status of the most recent agent update. If an update has never been requested, this value is NULL.
-
attributes => (array<associative-array>)The attributes set for the container instance by the Amazon ECS container agent at instance registration.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
Executes the RegisterTaskDefinition operation.
Registers a new task definition from the supplied
Examples
- Basic formatting example
$result = $client->registerTaskDefinition(array( // family is required 'family' => 'string', // containerDefinitions is required 'containerDefinitions' => array( array( 'name' => 'string', 'image' => 'string', 'cpu' => integer, 'memory' => integer, 'links' => array('string', ... ), 'portMappings' => array( array( 'containerPort' => integer, 'hostPort' => integer, 'protocol' => 'string', ), // ... repeated ), 'essential' => true || false, 'entryPoint' => array('string', ... ), 'command' => array('string', ... ), 'environment' => array( array( 'name' => 'string', 'value' => 'string', ), // ... repeated ), 'mountPoints' => array( array( 'sourceVolume' => 'string', 'containerPath' => 'string', 'readOnly' => true || false, ), // ... repeated ), 'volumesFrom' => array( array( 'sourceContainer' => 'string', 'readOnly' => true || false, ), // ... repeated ), 'hostname' => 'string', 'user' => 'string', 'workingDirectory' => 'string', 'disableNetworking' => true || false, 'privileged' => true || false, 'readonlyRootFilesystem' => true || false, 'dnsServers' => array('string', ... ), 'dnsSearchDomains' => array('string', ... ), 'extraHosts' => array( array( // hostname is required 'hostname' => 'string', // ipAddress is required 'ipAddress' => 'string', ), // ... repeated ), 'dockerSecurityOptions' => array('string', ... ), 'dockerLabels' => array( // Associative array of custom 'String' key names 'String' => 'string', // ... repeated ), 'ulimits' => array( array( // name is required 'name' => 'string', // softLimit is required 'softLimit' => integer, // hardLimit is required 'hardLimit' => integer, ), // ... repeated ), 'logConfiguration' => array( // logDriver is required 'logDriver' => 'string', 'options' => array( // Associative array of custom 'String' key names 'String' => 'string', // ... repeated ), ), ), // ... repeated ), 'volumes' => array( array( 'name' => 'string', 'host' => array( 'sourcePath' => 'string', ), ), // ... repeated ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
family => (string)You must specify a family for a task definition, which allows you to track multiple versions of the same task definition. The family is used as a name for your task definition. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed.
-
containerDefinitions => (array<associative-array>)A list of container definitions in JSON format that describe the different containers that make up your task.
- (associative-array)
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
-
name => (string)The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run.
-
image => (string)The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with repository-url/image:tag. Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run.
-
cpu => (int)The number of cpu units reserved for the container. A container instance has 1,024 cpu units for every CPU core. This parameter specifies the minimum amount of CPU to reserve for a container, and containers share unallocated CPU units with other containers on the instance with the same ratio as their allocated amount. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run.
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
The Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2; however, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
- Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to 2 CPU shares.
- Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
-
memory => (int)The number of MiB of memory reserved for the container. If your container attempts to exceed the memory allocated here, the container is killed. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run.
-
links => (array<string>)The link parameter allows containers to communicate with each other without the need for port mappings, using the name parameter and optionally, an alias for the link. This construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed for each name and alias. For more information on linking Docker containers, see https://docs.docker.com/userguide/dockerlinks/. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run.
-
portMappings => (array<associative-array>)The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic. This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run.
- (associative-array)
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
containerPort => (int)The port number on the container that is bound to the user-specified or automatically assigned host port. If you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range (for more information, see hostPort).
-
hostPort => (int)The port number on the container instance to reserve for your container. You can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range is 49153 to 65535, and this range is used for Docker versions prior to 1.6.0. For Docker version 1.6.0 and later, the Docker daemon tries to read the ephemeral port range from /proc/sys/net/ipv4/ip_local_port_range; if this kernel parameter is unavailable, the default ephemeral port range is used. You should not attempt to specify a host port in the ephemeral port range, because these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent port 51678. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released).The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output, and a container instance may have up to 50 reserved ports at a time, including the default reserved ports (automatically assigned ports do not count toward this limit).
-
protocol => (string:tcp |udp )The protocol used for the port mapping. Valid values are tcp and udp. The default is tcp.
-
- (associative-array)
-
essential => (bool)If the essential parameter of a container is marked as true, the failure of that container stops the task. If the essential parameter of a container is marked as false, then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container.
-
entryPoint => (array<string>)Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint, update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run. For more information, see https://docs.docker.com/reference/builder/#entrypoint.
-
command => (array<string>)The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run. For more information, see https://docs.docker.com/reference/builder/#cmd.
-
environment => (array<associative-array>)The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
mountPoints => (array<associative-array>)The mount points for data volumes in your container. This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run.
- (associative-array)
Details on a volume mount point that is used in a container definition.
-
sourceVolume => (string)The name of the volume to mount.
-
containerPath => (string)The path on the container to mount the host volume at.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
volumesFrom => (array<associative-array>)Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run.
- (associative-array)
Details on a data volume from another container.
-
sourceContainer => (string)The name of the container to mount volumes from.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
hostname => (string)The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run.
-
user => (string)The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run.
-
workingDirectory => (string)The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run.
-
disableNetworking => (bool)When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API.
-
privileged => (bool)When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run.
-
readonlyRootFilesystem => (bool)When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run.
-
dnsServers => (array<string>)A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run.
-
dnsSearchDomains => (array<string>)A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run.
-
extraHosts => (array<associative-array>)A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run.
- (associative-array)
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition.
-
hostname => (string)The hostname to use in the /etc/hosts entry.
-
ipAddress => (string)The IP address to use in the /etc/hosts entry.
-
- (associative-array)
-
dockerSecurityOptions => (array<string>)A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run.
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
dockerLabels => (associative-array<string>)Associative array of <String> keys mapping to (string) values. Each array key should be changed to an appropriate <String>.
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<String> => (string)
-
-
ulimits => (array<associative-array>)A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run. Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
- (associative-array)
The ulimit settings to pass to the container.
-
name => (string:core |cpu |data |fsize |locks |memlock |msgqueue |nice |nofile |nproc |rss |rtprio |rttime |sigpending |stack )The type of the ulimit.
-
softLimit => (int)The soft limit for the ulimit type.
-
hardLimit => (int)The hard limit for the ulimit type.
-
- (associative-array)
-
logConfiguration => (associative-array)The log configuration specification for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run. Valid log drivers are displayed in the LogConfiguration data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
logDriver => (string:json-file |syslog |journald |gelf |fluentd )The log driver to use for the container. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
options => (associative-array<string>)Associative array of <String> keys mapping to (string) values. Each array key should be changed to an appropriate <String>.
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<String> => (string)
-
-
-
- (associative-array)
-
volumes => (array<associative-array>)A list of volume definitions in JSON format that containers in your task may use.
- (associative-array)
A data volume used in a task definition.
-
name => (string)The name of the volume. This name is referenced in the sourceVolume parameter of container definition mountPoints.
-
host => (associative-array)The path on the host container instance that is presented to the containers which access the volume. If this parameter is empty, then the Docker daemon assigns a host path for you.
-
sourcePath => (string)The path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you.
-
-
- (associative-array)
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
taskDefinition => (associative-array)The full description of the registered task definition.
-
taskDefinitionArn => (string)The full Amazon Resource Name (ARN) of the of the task definition.
-
containerDefinitions => (array<associative-array>)A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon EC2 Container Service Developer Guide.
- (associative-array)
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
-
name => (string)The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run.
-
image => (string)The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with repository-url/image:tag. Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run.
-
cpu => (int)The number of cpu units reserved for the container. A container instance has 1,024 cpu units for every CPU core. This parameter specifies the minimum amount of CPU to reserve for a container, and containers share unallocated CPU units with other containers on the instance with the same ratio as their allocated amount. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run.
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
The Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2; however, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
- Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to 2 CPU shares.
- Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
-
memory => (int)The number of MiB of memory reserved for the container. If your container attempts to exceed the memory allocated here, the container is killed. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run.
-
links => (array<string>)The link parameter allows containers to communicate with each other without the need for port mappings, using the name parameter and optionally, an alias for the link. This construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed for each name and alias. For more information on linking Docker containers, see https://docs.docker.com/userguide/dockerlinks/. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run.
-
portMappings => (array<associative-array>)The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic. This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run.
- (associative-array)
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
containerPort => (int)The port number on the container that is bound to the user-specified or automatically assigned host port. If you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range (for more information, see hostPort).
-
hostPort => (int)The port number on the container instance to reserve for your container. You can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range is 49153 to 65535, and this range is used for Docker versions prior to 1.6.0. For Docker version 1.6.0 and later, the Docker daemon tries to read the ephemeral port range from /proc/sys/net/ipv4/ip_local_port_range; if this kernel parameter is unavailable, the default ephemeral port range is used. You should not attempt to specify a host port in the ephemeral port range, because these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent port 51678. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released).The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output, and a container instance may have up to 50 reserved ports at a time, including the default reserved ports (automatically assigned ports do not count toward this limit).
-
protocol => (string)The protocol used for the port mapping. Valid values are tcp and udp. The default is tcp.
-
- (associative-array)
-
essential => (bool)If the essential parameter of a container is marked as true, the failure of that container stops the task. If the essential parameter of a container is marked as false, then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container.
-
entryPoint => (array<string>)Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint, update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run. For more information, see https://docs.docker.com/reference/builder/#entrypoint.
-
command => (array<string>)The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run. For more information, see https://docs.docker.com/reference/builder/#cmd.
-
environment => (array<associative-array>)The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
mountPoints => (array<associative-array>)The mount points for data volumes in your container. This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run.
- (associative-array)
Details on a volume mount point that is used in a container definition.
-
sourceVolume => (string)The name of the volume to mount.
-
containerPath => (string)The path on the container to mount the host volume at.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
volumesFrom => (array<associative-array>)Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run.
- (associative-array)
Details on a data volume from another container.
-
sourceContainer => (string)The name of the container to mount volumes from.
-
readOnly => (bool)If this value is true, the container has read-only access to the volume. If this value is false, then the container can write to the volume. The default value is false.
-
- (associative-array)
-
hostname => (string)The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run.
-
user => (string)The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run.
-
workingDirectory => (string)The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run.
-
disableNetworking => (bool)When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API.
-
privileged => (bool)When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run.
-
readonlyRootFilesystem => (bool)When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run.
-
dnsServers => (array<string>)A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run.
-
dnsSearchDomains => (array<string>)A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run.
-
extraHosts => (array<associative-array>)A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run.
- (associative-array)
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition.
-
hostname => (string)The hostname to use in the /etc/hosts entry.
-
ipAddress => (string)The IP address to use in the /etc/hosts entry.
-
- (associative-array)
-
dockerSecurityOptions => (array<string>)A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run.
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
dockerLabels => (associative-array<string>)Associative array of <string> keys mapping to (string) values. Each array key should be changed to an appropriate <string>.
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<string> => (string)
-
-
ulimits => (array<associative-array>)A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run. Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
- (associative-array)
The ulimit settings to pass to the container.
-
name => (string)The type of the ulimit.
-
softLimit => (int)The soft limit for the ulimit type.
-
hardLimit => (int)The hard limit for the ulimit type.
-
- (associative-array)
-
logConfiguration => (associative-array)The log configuration specification for the container. This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run. Valid log drivers are displayed in the LogConfiguration data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon EC2 Container Service Developer Guide.
-
logDriver => (string)The log driver to use for the container. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
options => (associative-array<string>)Associative array of <string> keys mapping to (string) values. Each array key should be changed to an appropriate <string>.
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log into your container instance and run the following command: sudo docker version | grep "Server API version"
-
<string> => (string)
-
-
-
- (associative-array)
-
family => (string)The family of your task definition, used as the definition name.
-
revision => (int)The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is 1; each time you register a new revision of a task definition in the same family, the revision value always increases by one (even if you have deregistered previous revisions in this family).
-
volumes => (array<associative-array>)The list of volumes in a task. For more information about volume definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon EC2 Container Service Developer Guide.
- (associative-array)
A data volume used in a task definition.
-
name => (string)The name of the volume. This name is referenced in the sourceVolume parameter of container definition mountPoints.
-
host => (associative-array)The path on the host container instance that is presented to the containers which access the volume. If this parameter is empty, then the Docker daemon assigns a host path for you.
-
sourcePath => (string)The path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you.
-
-
- (associative-array)
-
status => (string)The status of the task definition.
-
requiresAttributes => (array<associative-array>)The container instance attributes required by your task.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
Executes the RunTask operation.
Start a task using random placement and the default Amazon ECS scheduler. To
use your own scheduler or place a task on a specific container instance, use
The
Examples
- Basic formatting example
$result = $client->runTask(array( 'cluster' => 'string', // taskDefinition is required 'taskDefinition' => 'string', 'overrides' => array( 'containerOverrides' => array( array( 'name' => 'string', 'command' => array('string', ... ), 'environment' => array( array( 'name' => 'string', 'value' => 'string', ), // ... repeated ), ), // ... repeated ), ), 'count' => integer, 'startedBy' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster on which to run your task. If you do not specify a cluster, the default cluster is assumed..
-
taskDefinition => (string)The family and revision (family:revision) or full Amazon Resource Name (ARN) of the task definition to run. If a revision is not specified, the latest ACTIVE revision is used.
-
overrides => (associative-array)A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that is specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.
A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.
-
containerOverrides => (array<associative-array>)One or more container overrides sent to a task.
- (associative-array)
The overrides that should be sent to a container.
-
name => (string)The name of the container that receives the override.
-
command => (array<string>)The command to send to the container that overrides the default command from the Docker image or the task definition.
-
environment => (array<associative-array>)The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
- (associative-array)
-
-
count => (int)The number of instantiations of the specified task to place on your cluster.
The count parameter is limited to 10 tasks per call.
-
startedBy => (string)An optional tag specified when a task is started. For example if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value.
If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
tasks => (array<associative-array>)A full description of the tasks that were run. Each task that was successfully placed on your cluster are described here.
- (associative-array)
Details on a task in a cluster.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the task.
-
taskDefinitionArn => (string)The Amazon Resource Name (ARN) of the of the task definition that creates the task.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instances that host the task.
-
overrides => (associative-array)One or more container overrides.
-
containerOverrides => (array<associative-array>)One or more container overrides sent to a task.
- (associative-array)
The overrides that should be sent to a container.
-
name => (string)The name of the container that receives the override.
-
command => (array<string>)The command to send to the container that overrides the default command from the Docker image or the task definition.
-
environment => (array<associative-array>)The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
- (associative-array)
-
-
lastStatus => (string)The last known status of the task.
-
desiredStatus => (string)The desired status of the task.
-
containers => (array<associative-array>)The containers associated with the task.
- (associative-array)
A Docker container that is part of a task.
-
containerArn => (string)The Amazon Resource Name (ARN) of the container.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
name => (string)The name of the container.
-
lastStatus => (string)The last known status of the container.
-
exitCode => (int)The exit code returned from the container.
-
reason => (string)A short (255 max characters) human-readable string to provide additional detail about a running or stopped container.
-
networkBindings => (array<associative-array>)The network bindings associated with the container.
- (associative-array)
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
bindIP => (string)The IP address that the container is bound to on the container instance.
-
containerPort => (int)The port number on the container that is be used with the network binding.
-
hostPort => (int)The port number on the host that is used with the network binding.
-
protocol => (string)The protocol used for the network binding.
-
- (associative-array)
-
- (associative-array)
-
startedBy => (string)The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
-
- (associative-array)
-
failures => (array<associative-array>)Any failures associated with the call.
- (associative-array)
A failed resource.
-
arn => (string)The Amazon Resource Name (ARN) of the failed resource.
-
reason => (string)The reason for the failure.
-
- (associative-array)
Executes the StartTask operation.
Starts a new task from the specified task definition on the specified
container instance or instances. To use the default Amazon ECS scheduler to
place your task, use
The list of container instances to start tasks on is limited to 10.
Examples
- Basic formatting example
$result = $client->startTask(array( 'cluster' => 'string', // taskDefinition is required 'taskDefinition' => 'string', 'overrides' => array( 'containerOverrides' => array( array( 'name' => 'string', 'command' => array('string', ... ), 'environment' => array( array( 'name' => 'string', 'value' => 'string', ), // ... repeated ), ), // ... repeated ), ), // containerInstances is required 'containerInstances' => array('string', ... ), 'startedBy' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster on which to start your task. If you do not specify a cluster, the default cluster is assumed..
-
taskDefinition => (string)The family and revision (family:revision) or full Amazon Resource Name (ARN) of the task definition to start. If a revision is not specified, the latest ACTIVE revision is used.
-
overrides => (associative-array)A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that is specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.
A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.
-
containerOverrides => (array<associative-array>)One or more container overrides sent to a task.
- (associative-array)
The overrides that should be sent to a container.
-
name => (string)The name of the container that receives the override.
-
command => (array<string>)The command to send to the container that overrides the default command from the Docker image or the task definition.
-
environment => (array<associative-array>)The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
- (associative-array)
-
-
containerInstances => (array<string>)The container instance IDs or full Amazon Resource Name (ARN) entries for the container instances on which you would like to place your task.
The list of container instances to start tasks on is limited to 10.
-
startedBy => (string)An optional tag specified when a task is started. For example if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value.
If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
tasks => (array<associative-array>)A full description of the tasks that were started. Each task that was successfully placed on your container instances are described here.
- (associative-array)
Details on a task in a cluster.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the task.
-
taskDefinitionArn => (string)The Amazon Resource Name (ARN) of the of the task definition that creates the task.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instances that host the task.
-
overrides => (associative-array)One or more container overrides.
-
containerOverrides => (array<associative-array>)One or more container overrides sent to a task.
- (associative-array)
The overrides that should be sent to a container.
-
name => (string)The name of the container that receives the override.
-
command => (array<string>)The command to send to the container that overrides the default command from the Docker image or the task definition.
-
environment => (array<associative-array>)The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
- (associative-array)
-
-
lastStatus => (string)The last known status of the task.
-
desiredStatus => (string)The desired status of the task.
-
containers => (array<associative-array>)The containers associated with the task.
- (associative-array)
A Docker container that is part of a task.
-
containerArn => (string)The Amazon Resource Name (ARN) of the container.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
name => (string)The name of the container.
-
lastStatus => (string)The last known status of the container.
-
exitCode => (int)The exit code returned from the container.
-
reason => (string)A short (255 max characters) human-readable string to provide additional detail about a running or stopped container.
-
networkBindings => (array<associative-array>)The network bindings associated with the container.
- (associative-array)
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
bindIP => (string)The IP address that the container is bound to on the container instance.
-
containerPort => (int)The port number on the container that is be used with the network binding.
-
hostPort => (int)The port number on the host that is used with the network binding.
-
protocol => (string)The protocol used for the network binding.
-
- (associative-array)
-
- (associative-array)
-
startedBy => (string)The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
-
- (associative-array)
-
failures => (array<associative-array>)Any failures associated with the call.
- (associative-array)
A failed resource.
-
arn => (string)The Amazon Resource Name (ARN) of the failed resource.
-
reason => (string)The reason for the failure.
-
- (associative-array)
Executes the StopTask operation.
Stops a running task.
When StopTask is called on a task, the equivalent of
Examples
- Basic formatting example
$result = $client->stopTask(array( 'cluster' => 'string', // task is required 'task' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task to stop. If you do not specify a cluster, the default cluster is assumed..
-
task => (string)The task ID or full Amazon Resource Name (ARN) entry of the task to stop.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
task => (associative-array)Details on a task in a cluster.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the task.
-
taskDefinitionArn => (string)The Amazon Resource Name (ARN) of the of the task definition that creates the task.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instances that host the task.
-
overrides => (associative-array)One or more container overrides.
-
containerOverrides => (array<associative-array>)One or more container overrides sent to a task.
- (associative-array)
The overrides that should be sent to a container.
-
name => (string)The name of the container that receives the override.
-
command => (array<string>)The command to send to the container that overrides the default command from the Docker image or the task definition.
-
environment => (array<associative-array>)The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition.
- (associative-array)
A key and value pair object.
-
name => (string)The name of the key value pair. For environment variables, this is the name of the environment variable.
-
value => (string)The value of the key value pair. For environment variables, this is the value of the environment variable.
-
- (associative-array)
-
- (associative-array)
-
-
lastStatus => (string)The last known status of the task.
-
desiredStatus => (string)The desired status of the task.
-
containers => (array<associative-array>)The containers associated with the task.
- (associative-array)
A Docker container that is part of a task.
-
containerArn => (string)The Amazon Resource Name (ARN) of the container.
-
taskArn => (string)The Amazon Resource Name (ARN) of the task.
-
name => (string)The name of the container.
-
lastStatus => (string)The last known status of the container.
-
exitCode => (int)The exit code returned from the container.
-
reason => (string)A short (255 max characters) human-readable string to provide additional detail about a running or stopped container.
-
networkBindings => (array<associative-array>)The network bindings associated with the container.
- (associative-array)
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
bindIP => (string)The IP address that the container is bound to on the container instance.
-
containerPort => (int)The port number on the container that is be used with the network binding.
-
hostPort => (int)The port number on the host that is used with the network binding.
-
protocol => (string)The protocol used for the network binding.
-
- (associative-array)
-
- (associative-array)
-
startedBy => (string)The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
-
Executes the SubmitContainerStateChange operation.
This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a container changed states.
Examples
- Basic formatting example
$result = $client->submitContainerStateChange(array( 'cluster' => 'string', 'task' => 'string', 'containerName' => 'string', 'status' => 'string', 'exitCode' => integer, 'reason' => 'string', 'networkBindings' => array( array( 'bindIP' => 'string', 'containerPort' => integer, 'hostPort' => integer, 'protocol' => 'string', ), // ... repeated ), ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container.
-
task => (string)The task ID or full Amazon Resource Name (ARN) of the task that hosts the container.
-
containerName => (string)The name of the container.
-
status => (string)The status of the state change request.
-
exitCode => (int)The exit code returned for the state change request.
-
reason => (string)The reason for the state change request.
-
networkBindings => (array<associative-array>)The network bindings of the container.
- (associative-array)
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
-
bindIP => (string)The IP address that the container is bound to on the container instance.
-
containerPort => (int)The port number on the container that is be used with the network binding.
-
hostPort => (int)The port number on the host that is used with the network binding.
-
protocol => (string:tcp |udp )The protocol used for the network binding.
-
- (associative-array)
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
acknowledgment => (string)Acknowledgement of the state change.
Executes the SubmitTaskStateChange operation.
This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.
Sent to acknowledge that a task changed states.
Examples
- Basic formatting example
$result = $client->submitTaskStateChange(array( 'cluster' => 'string', 'task' => 'string', 'status' => 'string', 'reason' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task.
-
task => (string)The task ID or full Amazon Resource Name (ARN) of the task in the state change request.
-
status => (string)The status of the state change request.
-
reason => (string)The reason for the state change request.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
acknowledgment => (string)Acknowledgement of the state change.
Executes the UpdateContainerAgent operation.
Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent does not interrupt running tasks or services on the container instance. The process for updating the agent differs depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating system.
Examples
- Basic formatting example
$result = $client->updateContainerAgent(array( 'cluster' => 'string', // containerInstance is required 'containerInstance' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that your container instance is running on. If you do not specify a cluster, the default cluster is assumed.
-
containerInstance => (string)The container instance ID or full Amazon Resource Name (ARN) entries for the container instance on which you would like to update the Amazon ECS container agent.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
containerInstance => (associative-array)An EC2 instance that is running the Amazon ECS agent and has been registered with a cluster.
-
containerInstanceArn => (string)The Amazon Resource Name (ARN) of the container instance. The ARN contains the arn:aws:ecs namespace, followed by the region of the container instance, the AWS account ID of the container instance owner, the container-instance namespace, and then the container instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
-
ec2InstanceId => (string)The EC2 instance ID of the container instance.
-
versionInfo => (associative-array)The version information for the Amazon ECS container agent and Docker daemon running on the container instance.
-
agentVersion => (string)The version number of the Amazon ECS container agent.
-
agentHash => (string)The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent GitHub repository.
-
dockerVersion => (string)The Docker version running on the container instance.
-
-
remainingResources => (array<associative-array>)The remaining resources of the container instance that are available for new tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
registeredResources => (array<associative-array>)The registered resources on the container instance that are in use by current tasks.
- (associative-array)
Describes the resources available for a container instance.
-
=> (associative-array) Associative array of custom key value pairs
-
- (associative-array)
-
status => (string)The status of the container instance. The valid values are ACTIVE or INACTIVE. ACTIVE indicates that the container instance can accept tasks.
-
agentConnected => (bool)This parameter returns true if the agent is actually connected to Amazon ECS. Registered instances with an agent that may be unhealthy or stopped return false, and instances without a connected agent cannot accept placement requests.
-
runningTasksCount => (int)The number of tasks on the container instance that are in the RUNNING status.
-
pendingTasksCount => (int)The number of tasks on the container instance that are in the PENDING status.
-
agentUpdateStatus => (string)The status of the most recent agent update. If an update has never been requested, this value is NULL.
-
attributes => (array<associative-array>)The attributes set for the container instance by the Amazon ECS container agent at instance registration.
- (associative-array)
The attributes applicable to a container instance when it is registered.
-
name => (string)The name of the container instance attribute.
-
value => (string)The value of the container instance attribute.
-
- (associative-array)
-
Executes the UpdateService operation.
Modify the desired count or task definition used in a service.
You can add to or subtract from the number of instantiations of a task
definition in a service by specifying the cluster that the service is running in
and a new
You can use
When UpdateService replaces a task during an update, the equivalent of
Examples
- Basic formatting example
$result = $client->updateService(array( 'cluster' => 'string', // service is required 'service' => 'string', 'desiredCount' => integer, 'taskDefinition' => 'string', ));
Parameters
- $args
array
$arg Associative array containing the following keys (required keys are bold):-
cluster => (string)The short name or full Amazon Resource Name (ARN) of the cluster that your service is running on. If you do not specify a cluster, the default cluster is assumed.
-
service => (string)The name of the service to update.
-
desiredCount => (int)The number of instantiations of the task to place and keep running in your service.
-
taskDefinition => (string)The family and revision (family:revision) or full Amazon Resource Name (ARN) of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used. If you modify the task definition with UpdateService, Amazon ECS spawns a task with the new version of the task definition and then stops an old task after the new version is running.
-
Returns
Guzzle\Service\Resource\Model
Returns a response Model object
-
service => (associative-array)The full description of your service following the update call.
-
serviceArn => (string)The Amazon Resource Name (ARN) that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:&example-aws-account-id;:service/my-service.
-
serviceName => (string)A user-generated string that you can use to identify your service.
-
clusterArn => (string)The Amazon Resource Name (ARN) of the of the cluster that hosts the service.
-
loadBalancers => (array<associative-array>)A list of load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
- (associative-array)
Details on a load balancer that is used with a service.
-
loadBalancerName => (string)The name of the load balancer.
-
containerName => (string)The name of the container to associate with the load balancer.
-
containerPort => (int)The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
-
- (associative-array)
-
status => (string)The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
-
desiredCount => (int)The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
runningCount => (int)The number of tasks in the cluster that are in the RUNNING state.
-
pendingCount => (int)The number of tasks in the cluster that are in the PENDING state.
-
taskDefinition => (string)The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
-
deployments => (array<associative-array>)The current state of deployments for the service.
- (associative-array)
The details of an Amazon ECS service deployment.
-
id => (string)The ID of the deployment.
-
status => (string)The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
-
taskDefinition => (string)The most recent task definition that was specified for the service to use.
-
desiredCount => (int)The most recent desired count of tasks that was specified for the service to deploy or maintain.
-
pendingCount => (int)The number of tasks in the deployment that are in the PENDING status.
-
runningCount => (int)The number of tasks in the deployment that are in the RUNNING status.
-
createdAt => (string)The Unix time in seconds and milliseconds when the service was created.
-
updatedAt => (string)The Unix time in seconds and milliseconds when the service was last updated.
-
- (associative-array)
-
roleArn => (string)The Amazon Resource Name (ARN) of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with a load balancer.
-
events => (array<associative-array>)The event stream for your service. A maximum of 100 of the latest events are displayed.
- (associative-array)
Details on an event associated with a service.
-
id => (string)The ID string of the event.
-
createdAt => (string)The Unix time in seconds and milliseconds when the event was triggered.
-
message => (string)The event message.
-
- (associative-array)
-
The input array uses the parameters of the ListClusters operation
Parameters
- $args
array
$args
Returns
ResourceIteratorInterface
The input array uses the parameters of the ListContainerInstances operation
Parameters
- $args
array
$args
Returns
ResourceIteratorInterface
The input array uses the parameters of the ListTaskDefinitions operation
Parameters
- $args
array
$args
Returns
ResourceIteratorInterface
The input array uses the parameters of the ListTaskDefinitionFamilies operation
Parameters
- $args
array
$args
Returns
ResourceIteratorInterface
The input array uses the parameters of the ListTasks operation
Parameters
- $args
array
$args
Returns
ResourceIteratorInterface
The input array uses the parameters of the ListServices operation
Parameters
- $args
array
$args
Returns
ResourceIteratorInterface
Methods inherited from Aws\Common\Client\AbstractClient
__call()
,
__construct()
,
createRequest()
,
getAllEvents()
,
getApiVersion()
,
getCredentials()
,
getRegion()
,
getRegions()
,
getSignature()
,
getWaiter()
,
getWaiterFactory()
,
send()
,
setCredentials()
,
setRegion()
,
setWaiterFactory()
,
waitUntil()
Methods inherited from Guzzle\Service\Client
execute()
,
executeMultiple()
,
getCommand()
,
getCommandFactory()
,
getDescription()
,
getInflector()
,
getIterator()
,
getResourceIteratorFactory()
,
prepareCommand()
,
setCommandFactory()
,
setDescription()
,
setInflector()
,
setResourceIteratorFactory()
Methods inherited from Guzzle\Http\Client
delete()
,
expandTemplate()
,
extractPharCacert()
,
get()
,
getBaseUrl()
,
getConfig()
,
getCurlMulti()
,
getDefaultOption()
,
getDefaultUserAgent()
,
getUriTemplate()
,
head()
,
initSsl()
,
options()
,
patch()
,
post()
,
prepareRequest()
,
put()
,
sendMultiple()
,
setBaseUrl()
,
setConfig()
,
setCurlMulti()
,
setDefaultOption()
,
setRequestFactory()
,
setSslVerification()
,
setUriTemplate()
,
setUserAgent()
Methods inherited from Guzzle\Common\AbstractHasDispatcher
addSubscriber()
,
dispatch()
,
getEventDispatcher()
,
setEventDispatcher()
Magic methods summary
Constants summary
string |
LATEST_API_VERSION |
'2014-11-13' |
Constants inherited from Guzzle\Service\Client
Constants inherited from Guzzle\Http\Client
CURL_OPTIONS
,
DEFAULT_SELECT_TIMEOUT
,
DISABLE_REDIRECTS
,
MAX_HANDLES
,
REQUEST_OPTIONS
,
SSL_CERT_AUTHORITY
Constants inherited from Guzzle\Http\ClientInterface
Properties summary
Properties inherited from Aws\Common\Client\AbstractClient
$aggregator
,
$credentials
,
$signature
,
$waiterFactory
Properties inherited from Guzzle\Service\Client
$commandFactory
,
$inflector
,
$resourceIteratorFactory
,
$serviceDescription
Properties inherited from Guzzle\Http\Client
$defaultHeaders
,
$requestFactory
,
$userAgent