CfnConnectPeer

class aws_cdk.aws_networkmanager.CfnConnectPeer(scope, id, *, connect_attachment_id, inside_cidr_blocks, peer_address, bgp_options=None, core_network_address=None, tags=None)

Bases: CfnResource

A CloudFormation AWS::NetworkManager::ConnectPeer.

Creates a core network Connect peer for a specified core network connect attachment between a core network and an appliance. The peer address and transit gateway address must be the same IP address family (IPv4 or IPv6).

CloudformationResource:: AWS::NetworkManager::ConnectPeer
Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-networkmanager-connectpeer.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_networkmanager as networkmanager

cfn_connect_peer = networkmanager.CfnConnectPeer(self, "MyCfnConnectPeer",
    connect_attachment_id="connectAttachmentId",
    inside_cidr_blocks=["insideCidrBlocks"],
    peer_address="peerAddress",

    # the properties below are optional
    bgp_options=networkmanager.CfnConnectPeer.BgpOptionsProperty(
        peer_asn=123
    ),
    core_network_address="coreNetworkAddress",
    tags=[CfnTag(
        key="key",
        value="value"
    )]
)

Create a new AWS::NetworkManager::ConnectPeer.

Parameters:

scope (Construct) –
- scope in which this resource is defined.
id (str) –
- scoped id of the resource.
connect_attachment_id (str) – The ID of the attachment to connect.
inside_cidr_blocks (Sequence[str]) – The inside IP addresses used for a Connect peer configuration.
peer_address (str) – The IP address of the Connect peer.
bgp_options (Union[IResolvable, BgpOptionsProperty, Dict[str, Any], None]) – AWS::NetworkManager::ConnectPeer.BgpOptions.
core_network_address (Optional[str]) – The IP address of a core network.
tags (Optional[Sequence[Union[CfnTag, Dict[str, Any]]]]) – The list of key-value tags associated with the Connect peer.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:: path (str) – The path of the value to delete.
Return type:: None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:

key (str) –
value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:: property_path (str) – The path to the property.
Return type:: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:

property_path (str) – The path of the property.
value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

Return type:

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:: attribute_name (str) – The name of the attribute.
Return type:: Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:

inspector (TreeInspector) –

tree inspector to collect and process attributes.

Return type:

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:: new_logical_id (str) – The new logical ID to use for this stack element.
Return type:: None

to_string()

Returns a string representation of this construct.

Return type:: str
Returns:: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::NetworkManager::ConnectPeer'

attr_configuration_bgp_configurations

Configuration.BgpConfigurations

Type:: cloudformationAttribute

attr_configuration_core_network_address

Configuration.CoreNetworkAddress

Type:: cloudformationAttribute

attr_configuration_inside_cidr_blocks

Configuration.InsideCidrBlocks

Type:: cloudformationAttribute

attr_configuration_peer_address

Configuration.PeerAddress

Type:: cloudformationAttribute

attr_configuration_protocol

Configuration.Protocol

Type:: cloudformationAttribute

attr_connect_peer_id

The ID of the Connect peer.

CloudformationAttribute:: ConnectPeerId

attr_core_network_id

The core network ID.

CloudformationAttribute:: CoreNetworkId

attr_created_at

The timestamp when the Connect peer was created.

CloudformationAttribute:: CreatedAt

attr_edge_location

The Region where the edge is located.

CloudformationAttribute:: EdgeLocation

attr_state

The state of the Connect peer.

CloudformationAttribute:: State

bgp_options

AWS::NetworkManager::ConnectPeer.BgpOptions.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-networkmanager-connectpeer.html#cfn-networkmanager-connectpeer-bgpoptions

cfn_options: Options for this resource, such as condition, update policy etc.

cfn_resource_type: AWS resource type.

connect_attachment_id

The ID of the attachment to connect.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-networkmanager-connectpeer.html#cfn-networkmanager-connectpeer-connectattachmentid

core_network_address

The IP address of a core network.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-networkmanager-connectpeer.html#cfn-networkmanager-connectpeer-corenetworkaddress

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

inside_cidr_blocks

The inside IP addresses used for a Connect peer configuration.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-networkmanager-connectpeer.html#cfn-networkmanager-connectpeer-insidecidrblocks

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

node: The construct tree node associated with this construct.

peer_address

The IP address of the Connect peer.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-networkmanager-connectpeer.html#cfn-networkmanager-connectpeer-peeraddress

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

tags

The list of key-value tags associated with the Connect peer.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-networkmanager-connectpeer.html#cfn-networkmanager-connectpeer-tags

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_construct(x)

Return whether the given object is a Construct.

Parameters:

x (Any) –

Return type:

bool

BgpOptionsProperty

class CfnConnectPeer.BgpOptionsProperty(*, peer_asn=None)

Bases: object

Describes the BGP options.

Parameters:: peer_asn (Union[int, float, None]) – The Peer ASN of the BGP.
Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-bgpoptions.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_networkmanager as networkmanager

bgp_options_property = networkmanager.CfnConnectPeer.BgpOptionsProperty(
    peer_asn=123
)

Attributes

peer_asn

The Peer ASN of the BGP.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-bgpoptions.html#cfn-networkmanager-connectpeer-bgpoptions-peerasn

ConnectPeerBgpConfigurationProperty

class CfnConnectPeer.ConnectPeerBgpConfigurationProperty(*, core_network_address=None, core_network_asn=None, peer_address=None, peer_asn=None)

Bases: object

Describes a core network BGP configuration.

Parameters:

core_network_address (Optional[str]) – The address of a core network.
core_network_asn (Union[int, float, None]) – The ASN of the Coret Network.
peer_address (Optional[str]) – The address of a core network Connect peer.
peer_asn (Union[int, float, None]) – The ASN of the Connect peer.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-connectpeerbgpconfiguration.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_networkmanager as networkmanager

connect_peer_bgp_configuration_property = networkmanager.CfnConnectPeer.ConnectPeerBgpConfigurationProperty(
    core_network_address="coreNetworkAddress",
    core_network_asn=123,
    peer_address="peerAddress",
    peer_asn=123
)

Attributes

core_network_address

The address of a core network.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-connectpeerbgpconfiguration.html#cfn-networkmanager-connectpeer-connectpeerbgpconfiguration-corenetworkaddress

core_network_asn

The ASN of the Coret Network.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-connectpeerbgpconfiguration.html#cfn-networkmanager-connectpeer-connectpeerbgpconfiguration-corenetworkasn

peer_address

The address of a core network Connect peer.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-connectpeerbgpconfiguration.html#cfn-networkmanager-connectpeer-connectpeerbgpconfiguration-peeraddress

peer_asn

The ASN of the Connect peer.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-connectpeerbgpconfiguration.html#cfn-networkmanager-connectpeer-connectpeerbgpconfiguration-peerasn

ConnectPeerConfigurationProperty

class CfnConnectPeer.ConnectPeerConfigurationProperty(*, bgp_configurations=None, core_network_address=None, inside_cidr_blocks=None, peer_address=None, protocol=None)

Bases: object

Describes a core network Connect peer configuration.

Parameters:

bgp_configurations (Union[IResolvable, Sequence[Union[IResolvable, ConnectPeerBgpConfigurationProperty, Dict[str, Any]]], None]) – The Connect peer BGP configurations.
core_network_address (Optional[str]) – The IP address of a core network.
inside_cidr_blocks (Optional[Sequence[str]]) – The inside IP addresses used for a Connect peer configuration.
peer_address (Optional[str]) – The IP address of the Connect peer.
protocol (Optional[str]) – The protocol used for a Connect peer configuration.

Link:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-networkmanager-connectpeer-connectpeerconfiguration.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_networkmanager as networkmanager

connect_peer_configuration_property = networkmanager.CfnConnectPeer.ConnectPeerConfigurationProperty(
    bgp_configurations=[networkmanager.CfnConnectPeer.ConnectPeerBgpConfigurationProperty(
        core_network_address="coreNetworkAddress",
        core_network_asn=123,
        peer_address="peerAddress",
        peer_asn=123
    )],
    core_network_address="coreNetworkAddress",
    inside_cidr_blocks=["insideCidrBlocks"],
    peer_address="peerAddress",
    protocol="protocol"
)