CfnLoadBalancer

class aws_cdk.aws_lightsail.CfnLoadBalancer(scope, id, *, instance_port, load_balancer_name, attached_instances=None, health_check_path=None, ip_address_type=None, session_stickiness_enabled=None, session_stickiness_lb_cookie_duration_seconds=None, tags=None, tls_policy_name=None)

Bases: CfnResource

A CloudFormation AWS::Lightsail::LoadBalancer.

The AWS::Lightsail::LoadBalancer resource specifies a load balancer that can be used with Lightsail instances. .. epigraph:

You cannot attach a TLS certificate to a load balancer using the ``AWS::Lightsail::LoadBalancer`` resource type. Instead, use the ``AWS::Lightsail::LoadBalancerTlsCertificate`` resource type to create a certificate and attach it to a load balancer.

CloudformationResource:: AWS::Lightsail::LoadBalancer
Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_lightsail as lightsail

cfn_load_balancer = lightsail.CfnLoadBalancer(self, "MyCfnLoadBalancer",
    instance_port=123,
    load_balancer_name="loadBalancerName",

    # the properties below are optional
    attached_instances=["attachedInstances"],
    health_check_path="healthCheckPath",
    ip_address_type="ipAddressType",
    session_stickiness_enabled=False,
    session_stickiness_lb_cookie_duration_seconds="sessionStickinessLbCookieDurationSeconds",
    tags=[CfnTag(
        key="key",
        value="value"
    )],
    tls_policy_name="tlsPolicyName"
)

Create a new AWS::Lightsail::LoadBalancer.

Parameters:

scope (Construct) –
- scope in which this resource is defined.
id (str) –
- scoped id of the resource.
instance_port (Union[int, float]) – The port that the load balancer uses to direct traffic to your Lightsail instances. For HTTP traffic, specify port 80 . For HTTPS traffic, specify port 443 .
load_balancer_name (str) – The name of the load balancer.
attached_instances (Optional[Sequence[str]]) – The Lightsail instances to attach to the load balancer.
health_check_path (Optional[str]) – The path on the attached instance where the health check will be performed. If no path is specified, the load balancer tries to make a request to the default (root) page ( /index.html ).
ip_address_type (Optional[str]) – The IP address type of the load balancer. The possible values are ipv4 for IPv4 only, and dualstack for both IPv4 and IPv6.
session_stickiness_enabled (Union[bool, IResolvable, None]) – A Boolean value indicating whether session stickiness is enabled. Enable session stickiness (also known as session affinity ) to bind a user’s session to a specific instance. This ensures that all requests from the user during the session are sent to the same instance.
session_stickiness_lb_cookie_duration_seconds (Optional[str]) – The time period, in seconds, after which the load balancer session stickiness cookie should be considered stale. If you do not specify this parameter, the default value is 0, which indicates that the sticky session should last for the duration of the browser session.
tags (Optional[Sequence[Union[CfnTag, Dict[str, Any]]]]) – An array of key-value pairs to apply to this resource. For more information, see Tag in the AWS CloudFormation User Guide . .. epigraph:: The Value of Tags is optional for Lightsail resources.
tls_policy_name (Optional[str]) – The name of the TLS security policy for the load balancer.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:: path (str) – The path of the value to delete.
Return type:: None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:

key (str) –
value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:: property_path (str) – The path to the property.
Return type:: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:

property_path (str) – The path of the property.
value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

Return type:

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:: attribute_name (str) – The name of the attribute.
Return type:: Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:

inspector (TreeInspector) –

tree inspector to collect and process attributes.

Return type:

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:: new_logical_id (str) – The new logical ID to use for this stack element.
Return type:: None

to_string()

Returns a string representation of this construct.

Return type:: str
Returns:: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::Lightsail::LoadBalancer'

attached_instances

The Lightsail instances to attach to the load balancer.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-attachedinstances

attr_load_balancer_arn

The Amazon Resource Name (ARN) of the load balancer.

CloudformationAttribute:: LoadBalancerArn

cfn_options: Options for this resource, such as condition, update policy etc.

cfn_resource_type: AWS resource type.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

health_check_path

The path on the attached instance where the health check will be performed.

If no path is specified, the load balancer tries to make a request to the default (root) page ( /index.html ).

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-healthcheckpath

instance_port

The port that the load balancer uses to direct traffic to your Lightsail instances.

For HTTP traffic, specify port 80 . For HTTPS traffic, specify port 443 .

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-instanceport

ip_address_type

The IP address type of the load balancer.

The possible values are ipv4 for IPv4 only, and dualstack for both IPv4 and IPv6.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-ipaddresstype

load_balancer_name

The name of the load balancer.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-loadbalancername

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

node: The construct tree node associated with this construct.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

session_stickiness_enabled

A Boolean value indicating whether session stickiness is enabled.

Enable session stickiness (also known as session affinity ) to bind a user’s session to a specific instance. This ensures that all requests from the user during the session are sent to the same instance.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-sessionstickinessenabled

session_stickiness_lb_cookie_duration_seconds

The time period, in seconds, after which the load balancer session stickiness cookie should be considered stale.

If you do not specify this parameter, the default value is 0, which indicates that the sticky session should last for the duration of the browser session.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-sessionstickinesslbcookiedurationseconds

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

tags

An array of key-value pairs to apply to this resource.

For more information, see Tag in the AWS CloudFormation User Guide . .. epigraph:

The ``Value`` of ``Tags`` is optional for Lightsail resources.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-tags

tls_policy_name

The name of the TLS security policy for the load balancer.

Link:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lightsail-loadbalancer.html#cfn-lightsail-loadbalancer-tlspolicyname

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_construct(x)

Return whether the given object is a Construct.

Parameters:

x (Any) –

Return type:

bool