Interface CfnDBClusterProps
- All Superinterfaces:
software.amazon.jsii.JsiiSerializable
- All Known Implementing Classes:
CfnDBClusterProps.Jsii$Proxy
CfnDBCluster
.
Example:
// The code below shows an example of how to instantiate this type. // The values are placeholders you should change. import software.amazon.awscdk.services.rds.*; CfnDBClusterProps cfnDBClusterProps = CfnDBClusterProps.builder() .allocatedStorage(123) .associatedRoles(List.of(DBClusterRoleProperty.builder() .roleArn("roleArn") // the properties below are optional .featureName("featureName") .build())) .autoMinorVersionUpgrade(false) .availabilityZones(List.of("availabilityZones")) .backtrackWindow(123) .backupRetentionPeriod(123) .clusterScalabilityType("clusterScalabilityType") .copyTagsToSnapshot(false) .databaseName("databaseName") .dbClusterIdentifier("dbClusterIdentifier") .dbClusterInstanceClass("dbClusterInstanceClass") .dbClusterParameterGroupName("dbClusterParameterGroupName") .dbInstanceParameterGroupName("dbInstanceParameterGroupName") .dbSubnetGroupName("dbSubnetGroupName") .dbSystemId("dbSystemId") .deletionProtection(false) .domain("domain") .domainIamRoleName("domainIamRoleName") .enableCloudwatchLogsExports(List.of("enableCloudwatchLogsExports")) .enableGlobalWriteForwarding(false) .enableHttpEndpoint(false) .enableIamDatabaseAuthentication(false) .enableLocalWriteForwarding(false) .engine("engine") .engineLifecycleSupport("engineLifecycleSupport") .engineMode("engineMode") .engineVersion("engineVersion") .globalClusterIdentifier("globalClusterIdentifier") .iops(123) .kmsKeyId("kmsKeyId") .manageMasterUserPassword(false) .masterUsername("masterUsername") .masterUserPassword("masterUserPassword") .masterUserSecret(MasterUserSecretProperty.builder() .kmsKeyId("kmsKeyId") .secretArn("secretArn") .build()) .monitoringInterval(123) .monitoringRoleArn("monitoringRoleArn") .networkType("networkType") .performanceInsightsEnabled(false) .performanceInsightsKmsKeyId("performanceInsightsKmsKeyId") .performanceInsightsRetentionPeriod(123) .port(123) .preferredBackupWindow("preferredBackupWindow") .preferredMaintenanceWindow("preferredMaintenanceWindow") .publiclyAccessible(false) .replicationSourceIdentifier("replicationSourceIdentifier") .restoreToTime("restoreToTime") .restoreType("restoreType") .scalingConfiguration(ScalingConfigurationProperty.builder() .autoPause(false) .maxCapacity(123) .minCapacity(123) .secondsBeforeTimeout(123) .secondsUntilAutoPause(123) .timeoutAction("timeoutAction") .build()) .serverlessV2ScalingConfiguration(ServerlessV2ScalingConfigurationProperty.builder() .maxCapacity(123) .minCapacity(123) .build()) .snapshotIdentifier("snapshotIdentifier") .sourceDbClusterIdentifier("sourceDbClusterIdentifier") .sourceRegion("sourceRegion") .storageEncrypted(false) .storageType("storageType") .tags(List.of(CfnTag.builder() .key("key") .value("value") .build())) .useLatestRestorableTime(false) .vpcSecurityGroupIds(List.of("vpcSecurityGroupIds")) .build();
-
Nested Class Summary
Modifier and TypeInterfaceDescriptionstatic final class
A builder forCfnDBClusterProps
static final class
An implementation forCfnDBClusterProps
-
Method Summary
Modifier and TypeMethodDescriptionstatic CfnDBClusterProps.Builder
builder()
default Number
The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.default Object
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster.default Object
Specifies whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window.A list of Availability Zones (AZs) where instances in the DB cluster can be created.default Number
The target backtrack window, in seconds.default Number
The number of days for which automated backups are retained.default String
Specifies the scalability mode of the Aurora DB cluster.default Object
A value that indicates whether to copy all tags from the DB cluster to snapshots of the DB cluster.default String
The name of your database.default String
The DB cluster identifier.default String
The compute and memory capacity of each DB instance in the Multi-AZ DB cluster, for exampledb.m6gd.xlarge
.default String
The name of the DB cluster parameter group to associate with this DB cluster.default String
The name of the DB parameter group to apply to all instances of the DB cluster.default String
A DB subnet group that you want to associate with this DB cluster.default String
Reserved for future use.default Object
A value that indicates whether the DB cluster has deletion protection enabled.default String
Indicates the directory ID of the Active Directory to create the DB cluster.default String
Specifies the name of the IAM role to use when making API calls to the Directory Service.The list of log types that need to be enabled for exporting to CloudWatch Logs.default Object
Specifies whether to enable this DB cluster to forward write operations to the primary cluster of a global cluster (Aurora global database).default Object
Specifies whether to enable the HTTP endpoint for the DB cluster.default Object
A value that indicates whether to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts.default Object
Specifies whether read replicas can forward write operations to the writer DB instance in the DB cluster.default String
The name of the database engine to be used for this DB cluster.default String
The life cycle type for this DB cluster.default String
The DB engine mode of the DB cluster, eitherprovisioned
orserverless
.default String
The version number of the database engine to use.default String
If you are configuring an Aurora global database cluster and want your Aurora DB cluster to be a secondary member in the global database cluster, specify the global cluster ID of the global database cluster.default Number
getIops()
The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.default String
The Amazon Resource Name (ARN) of the AWS KMS key that is used to encrypt the database instances in the DB cluster, such asarn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef
.default Object
Specifies whether to manage the master user password with AWS Secrets Manager.default String
The name of the master user for the DB cluster.default String
The master password for the DB instance.default Object
The secret managed by RDS in AWS Secrets Manager for the master user password.default Number
The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster.default String
The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs.default String
The network type of the DB cluster.default Object
Specifies whether to turn on Performance Insights for the DB cluster.default String
The AWS KMS key identifier for encryption of Performance Insights data.default Number
The number of days to retain Performance Insights data.default Number
getPort()
The port number on which the DB instances in the DB cluster accept connections.default String
The daily time range during which automated backups are created.default String
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).default Object
Specifies whether the DB cluster is publicly accessible.default String
The Amazon Resource Name (ARN) of the source DB instance or DB cluster if this DB cluster is created as a read replica.default String
The date and time to restore the DB cluster to.default String
The type of restore to be performed.default Object
The scaling configuration of an Aurora Serverless v1 DB cluster.default Object
The scaling configuration of an Aurora Serverless V2 DB cluster.default String
The identifier for the DB snapshot or DB cluster snapshot to restore from.default String
When restoring a DB cluster to a point in time, the identifier of the source DB cluster from which to restore.default String
The AWS Region which contains the source DB cluster when replicating a DB cluster.default Object
Indicates whether the DB cluster is encrypted.default String
The storage type to associate with the DB cluster.getTags()
Tags to assign to the DB cluster.default Object
A value that indicates whether to restore the DB cluster to the latest restorable backup time.A list of EC2 VPC security groups to associate with this DB cluster.Methods inherited from interface software.amazon.jsii.JsiiSerializable
$jsii$toJson
-
Method Details
-
getAllocatedStorage
The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.Valid for Cluster Type: Multi-AZ DB clusters only
This setting is required to create a Multi-AZ DB cluster.
-
getAssociatedRoles
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster.IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other Amazon Web Services on your behalf.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getAutoMinorVersionUpgrade
Specifies whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window.By default, minor engine upgrades are applied automatically.
Valid for Cluster Type: Multi-AZ DB clusters only
-
getAvailabilityZones
A list of Availability Zones (AZs) where instances in the DB cluster can be created.For information on AWS Regions and Availability Zones, see Choosing the Regions and Availability Zones in the Amazon Aurora User Guide .
Valid for: Aurora DB clusters only
-
getBacktrackWindow
The target backtrack window, in seconds. To disable backtracking, set this value to0
.Valid for Cluster Type: Aurora MySQL DB clusters only
Default:
0
Constraints:
- If specified, this value must be set to a number from 0 to 259,200 (72 hours).
-
getBackupRetentionPeriod
The number of days for which automated backups are retained.Default: 1
Constraints:
- Must be a value from 1 to 35
Valid for: Aurora DB clusters and Multi-AZ DB clusters
Default: - 1
-
getClusterScalabilityType
Specifies the scalability mode of the Aurora DB cluster.When set to
limitless
, the cluster operates as an Aurora Limitless Database, allowing you to create a DB shard group for horizontal scaling (sharding) capabilities. When set tostandard
(the default), the cluster uses normal DB instance creation. -
getCopyTagsToSnapshot
A value that indicates whether to copy all tags from the DB cluster to snapshots of the DB cluster.The default is not to copy them.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getDatabaseName
The name of your database.If you don't provide a name, then Amazon RDS won't create a database in this DB cluster. For naming constraints, see Naming Constraints in the Amazon Aurora User Guide .
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getDbClusterIdentifier
The DB cluster identifier. This parameter is stored as a lowercase string.Constraints:
- Must contain from 1 to 63 letters, numbers, or hyphens.
- First character must be a letter.
- Can't end with a hyphen or contain two consecutive hyphens.
Example:
my-cluster1
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getDbClusterInstanceClass
The compute and memory capacity of each DB instance in the Multi-AZ DB cluster, for exampledb.m6gd.xlarge
. Not all DB instance classes are available in all AWS Regions , or for all database engines.For the full list of DB instance classes and availability for your engine, see DB instance class in the Amazon RDS User Guide .
This setting is required to create a Multi-AZ DB cluster.
Valid for Cluster Type: Multi-AZ DB clusters only
-
getDbClusterParameterGroupName
The name of the DB cluster parameter group to associate with this DB cluster.If you apply a parameter group to an existing DB cluster, then its DB instances might need to reboot. This can result in an outage while the DB instances are rebooting.
If you apply a change to parameter group associated with a stopped DB cluster, then the update stack waits until the DB cluster is started.
To list all of the available DB cluster parameter group names, use the following command:
aws rds describe-db-cluster-parameter-groups --query "DBClusterParameterGroups[].DBClusterParameterGroupName" --output text
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getDbInstanceParameterGroupName
The name of the DB parameter group to apply to all instances of the DB cluster.When you apply a parameter group using the
DBInstanceParameterGroupName
parameter, the DB cluster isn't rebooted automatically. Also, parameter changes are applied immediately rather than during the next maintenance window.Valid for Cluster Type: Aurora DB clusters only
Default: The existing name setting
Constraints:
- The DB parameter group must be in the same DB parameter group family as this DB cluster.
- The
DBInstanceParameterGroupName
parameter is valid in combination with theAllowMajorVersionUpgrade
parameter for a major version upgrade only.
-
getDbSubnetGroupName
A DB subnet group that you want to associate with this DB cluster.If you are restoring a DB cluster to a point in time with
RestoreType
set tocopy-on-write
, and don't specify a DB subnet group name, then the DB cluster is restored with a default DB subnet group.Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getDbSystemId
Reserved for future use. -
getDeletionProtection
A value that indicates whether the DB cluster has deletion protection enabled.The database can't be deleted when deletion protection is enabled. By default, deletion protection is disabled.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getDomain
Indicates the directory ID of the Active Directory to create the DB cluster.For Amazon Aurora DB clusters, Amazon RDS can use Kerberos authentication to authenticate users that connect to the DB cluster.
For more information, see Kerberos authentication in the Amazon Aurora User Guide .
Valid for: Aurora DB clusters only
-
getDomainIamRoleName
Specifies the name of the IAM role to use when making API calls to the Directory Service.Valid for: Aurora DB clusters only
-
getEnableCloudwatchLogsExports
The list of log types that need to be enabled for exporting to CloudWatch Logs.The values in the list depend on the DB engine being used. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide .
Aurora MySQL
Valid values:
audit
,error
,general
,slowquery
Aurora PostgreSQL
Valid values:
postgresql
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getEnableGlobalWriteForwarding
Specifies whether to enable this DB cluster to forward write operations to the primary cluster of a global cluster (Aurora global database).By default, write operations are not allowed on Aurora DB clusters that are secondary clusters in an Aurora global database.
You can set this value only on Aurora DB clusters that are members of an Aurora global database. With this parameter enabled, a secondary cluster can forward writes to the current primary cluster, and the resulting changes are replicated back to this cluster. For the primary DB cluster of an Aurora global database, this value is used immediately if the primary is demoted by a global cluster API operation, but it does nothing until then.
Valid for Cluster Type: Aurora DB clusters only
-
getEnableHttpEndpoint
Specifies whether to enable the HTTP endpoint for the DB cluster. By default, the HTTP endpoint isn't enabled.When enabled, the HTTP endpoint provides a connectionless web service API (RDS Data API) for running SQL queries on the DB cluster. You can also query your database from inside the RDS console with the RDS query editor.
RDS Data API is supported with the following DB clusters:
- Aurora PostgreSQL Serverless v2 and provisioned
- Aurora PostgreSQL and Aurora MySQL Serverless v1
For more information, see Using RDS Data API in the Amazon Aurora User Guide .
Valid for Cluster Type: Aurora DB clusters only
-
getEnableIamDatabaseAuthentication
A value that indicates whether to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts.By default, mapping is disabled.
For more information, see IAM Database Authentication in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters only
-
getEnableLocalWriteForwarding
Specifies whether read replicas can forward write operations to the writer DB instance in the DB cluster.By default, write operations aren't allowed on reader DB instances.
Valid for: Aurora DB clusters only
-
getEngine
The name of the database engine to be used for this DB cluster.Valid Values:
aurora-mysql
aurora-postgresql
mysql
postgres
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getEngineLifecycleSupport
The life cycle type for this DB cluster.By default, this value is set to
open-source-rds-extended-support
, which enrolls your DB cluster into Amazon RDS Extended Support. At the end of standard support, you can avoid charges for Extended Support by setting the value toopen-source-rds-extended-support-disabled
. In this case, creating the DB cluster will fail if the DB major version is past its end of standard support date.You can use this setting to enroll your DB cluster into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB cluster past the end of standard support for that engine version. For more information, see the following sections:
- Amazon Aurora - Using Amazon RDS Extended Support in the Amazon Aurora User Guide
- Amazon RDS - Using Amazon RDS Extended Support in the Amazon RDS User Guide
Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters
Valid Values:
open-source-rds-extended-support | open-source-rds-extended-support-disabled
Default:
open-source-rds-extended-support
-
getEngineMode
The DB engine mode of the DB cluster, eitherprovisioned
orserverless
.The
serverless
engine mode only applies for Aurora Serverless v1 DB clusters. Aurora Serverless v2 DB clusters use theprovisioned
engine mode.For information about limitations and requirements for Serverless DB clusters, see the following sections in the Amazon Aurora User Guide :
Valid for Cluster Type: Aurora DB clusters only
-
getEngineVersion
The version number of the database engine to use.To list all of the available engine versions for Aurora MySQL version 2 (5.7-compatible) and version 3 (8.0-compatible), use the following command:
aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"
You can supply either
5.7
or8.0
to use the default engine version for Aurora MySQL version 2 or version 3, respectively.To list all of the available engine versions for Aurora PostgreSQL, use the following command:
aws rds describe-db-engine-versions --engine aurora-postgresql --query "DBEngineVersions[].EngineVersion"
To list all of the available engine versions for RDS for MySQL, use the following command:
aws rds describe-db-engine-versions --engine mysql --query "DBEngineVersions[].EngineVersion"
To list all of the available engine versions for RDS for PostgreSQL, use the following command:
aws rds describe-db-engine-versions --engine postgres --query "DBEngineVersions[].EngineVersion"
Aurora MySQL
For information, see Database engine updates for Amazon Aurora MySQL in the Amazon Aurora User Guide .
Aurora PostgreSQL
For information, see Amazon Aurora PostgreSQL releases and engine versions in the Amazon Aurora User Guide .
MySQL
For information, see Amazon RDS for MySQL in the Amazon RDS User Guide .
PostgreSQL
For information, see Amazon RDS for PostgreSQL in the Amazon RDS User Guide .
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getGlobalClusterIdentifier
If you are configuring an Aurora global database cluster and want your Aurora DB cluster to be a secondary member in the global database cluster, specify the global cluster ID of the global database cluster.To define the primary database cluster of the global cluster, use the AWS::RDS::GlobalCluster resource.
If you aren't configuring a global database cluster, don't specify this property.
To remove the DB cluster from a global database cluster, specify an empty value for the
GlobalClusterIdentifier
property.For information about Aurora global databases, see Working with Amazon Aurora Global Databases in the Amazon Aurora User Guide .
Valid for: Aurora DB clusters only
-
getIops
The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.For information about valid IOPS values, see Provisioned IOPS storage in the Amazon RDS User Guide .
This setting is required to create a Multi-AZ DB cluster.
Valid for Cluster Type: Multi-AZ DB clusters only
Constraints:
- Must be a multiple between .5 and 50 of the storage amount for the DB cluster.
-
getKmsKeyId
The Amazon Resource Name (ARN) of the AWS KMS key that is used to encrypt the database instances in the DB cluster, such asarn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef
.If you enable the
StorageEncrypted
property but don't specify this property, the default KMS key is used. If you specify this property, you must set theStorageEncrypted
property totrue
.If you specify the
SnapshotIdentifier
property, theStorageEncrypted
property value is inherited from the snapshot, and if the DB cluster is encrypted, the specifiedKmsKeyId
property is used.If you create a read replica of an encrypted DB cluster in another AWS Region, make sure to set
KmsKeyId
to a KMS key identifier that is valid in the destination AWS Region. This KMS key is used to encrypt the read replica in that AWS Region.Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getManageMasterUserPassword
Specifies whether to manage the master user password with AWS Secrets Manager.For more information, see Password management with AWS Secrets Manager in the Amazon RDS User Guide and Password management with AWS Secrets Manager in the Amazon Aurora User Guide.
Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters
Constraints:
- Can't manage the master user password with AWS Secrets Manager if
MasterUserPassword
is specified.
- Can't manage the master user password with AWS Secrets Manager if
-
getMasterUsername
The name of the master user for the DB cluster.If you specify the
SourceDBClusterIdentifier
,SnapshotIdentifier
, orGlobalClusterIdentifier
property, don't specify this property. The value is inherited from the source DB cluster, the snapshot, or the primary DB cluster for the global database cluster, respectively.Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getMasterUserPassword
The master password for the DB instance.If you specify the
SourceDBClusterIdentifier
,SnapshotIdentifier
, orGlobalClusterIdentifier
property, don't specify this property. The value is inherited from the source DB cluster, the snapshot, or the primary DB cluster for the global database cluster, respectively.Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getMasterUserSecret
The secret managed by RDS in AWS Secrets Manager for the master user password.For more information, see Password management with AWS Secrets Manager in the Amazon RDS User Guide and Password management with AWS Secrets Manager in the Amazon Aurora User Guide.
-
getMonitoringInterval
The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster.To turn off collecting Enhanced Monitoring metrics, specify
0
.If
MonitoringRoleArn
is specified, also setMonitoringInterval
to a value other than0
.Valid for Cluster Type: Multi-AZ DB clusters only
Valid Values:
0 | 1 | 5 | 10 | 15 | 30 | 60
Default:
0
-
getMonitoringRoleArn
The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs.An example is
arn:aws:iam:123456789012:role/emaccess
. For information on creating a monitoring role, see Setting up and enabling Enhanced Monitoring in the Amazon RDS User Guide .If
MonitoringInterval
is set to a value other than0
, supply aMonitoringRoleArn
value.Valid for Cluster Type: Multi-AZ DB clusters only
-
getNetworkType
The network type of the DB cluster.Valid values:
IPV4
DUAL
The network type is determined by the
DBSubnetGroup
specified for the DB cluster. ADBSubnetGroup
can support only the IPv4 protocol or the IPv4 and IPv6 protocols (DUAL
).For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.
Valid for: Aurora DB clusters only
-
getPerformanceInsightsEnabled
Specifies whether to turn on Performance Insights for the DB cluster.For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide .
Valid for Cluster Type: Multi-AZ DB clusters only
-
getPerformanceInsightsKmsKeyId
The AWS KMS key identifier for encryption of Performance Insights data.The AWS KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.
If you don't specify a value for
PerformanceInsightsKMSKeyId
, then Amazon RDS uses your default KMS key. There is a default KMS key for your AWS account . Your AWS account has a different default KMS key for each AWS Region .Valid for Cluster Type: Multi-AZ DB clusters only
-
getPerformanceInsightsRetentionPeriod
The number of days to retain Performance Insights data.Valid for Cluster Type: Multi-AZ DB clusters only
Valid Values:
7
- month * 31, where month is a number of months from 1-23. Examples:
93
(3 months * 31),341
(11 months * 31),589
(19 months * 31) 731
Default:
7
daysIf you specify a retention period that isn't valid, such as
94
, Amazon RDS issues an error. -
getPort
The port number on which the DB instances in the DB cluster accept connections.Default:
- When
EngineMode
isprovisioned
,3306
(for both Aurora MySQL and Aurora PostgreSQL) - When
EngineMode
isserverless
: 3306
whenEngine
isaurora
oraurora-mysql
5432
whenEngine
isaurora-postgresql
The
No interruption
on update behavior only applies to DB clusters. If you are updating a DB instance, see Port for the AWS::RDS::DBInstance resource.Valid for: Aurora DB clusters and Multi-AZ DB clusters
- When
-
getPreferredBackupWindow
The daily time range during which automated backups are created.For more information, see Backup Window in the Amazon Aurora User Guide.
Constraints:
- Must be in the format
hh24:mi-hh24:mi
. - Must be in Universal Coordinated Time (UTC).
- Must not conflict with the preferred maintenance window.
- Must be at least 30 minutes.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
- Must be in the format
-
getPreferredMaintenanceWindow
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).Format:
ddd:hh24:mi-ddd:hh24:mi
The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred DB Cluster Maintenance Window in the Amazon Aurora User Guide.
Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Constraints: Minimum 30-minute window.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getPubliclyAccessible
Specifies whether the DB cluster is publicly accessible.When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its Domain Name System (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn't permitted if the security group assigned to the DB cluster doesn't permit it.
When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address.
Valid for Cluster Type: Multi-AZ DB clusters only
Default: The default behavior varies depending on whether
DBSubnetGroupName
is specified.If
DBSubnetGroupName
isn't specified, andPubliclyAccessible
isn't specified, the following applies:- If the default VPC in the target Region doesn’t have an internet gateway attached to it, the DB cluster is private.
- If the default VPC in the target Region has an internet gateway attached to it, the DB cluster is public.
If
DBSubnetGroupName
is specified, andPubliclyAccessible
isn't specified, the following applies:- If the subnets are part of a VPC that doesn’t have an internet gateway attached to it, the DB cluster is private.
- If the subnets are part of a VPC that has an internet gateway attached to it, the DB cluster is public.
-
getReplicationSourceIdentifier
The Amazon Resource Name (ARN) of the source DB instance or DB cluster if this DB cluster is created as a read replica.Valid for: Aurora DB clusters only
-
getRestoreToTime
The date and time to restore the DB cluster to.Valid Values: Value must be a time in Universal Coordinated Time (UTC) format
Constraints:
- Must be before the latest restorable time for the DB instance
- Must be specified if
UseLatestRestorableTime
parameter isn't provided - Can't be specified if the
UseLatestRestorableTime
parameter is enabled - Can't be specified if the
RestoreType
parameter iscopy-on-write
This property must be used with
SourceDBClusterIdentifier
property. The resulting cluster will have the identifier that matches the value of theDBclusterIdentifier
property.Example:
2015-03-07T23:45:00Z
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getRestoreType
The type of restore to be performed. You can specify one of the following values:.full-copy
- The new DB cluster is restored as a full copy of the source DB cluster.copy-on-write
- The new DB cluster is restored as a clone of the source DB cluster.
If you don't specify a
RestoreType
value, then the new DB cluster is restored as a full copy of the source DB cluster.Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getScalingConfiguration
The scaling configuration of an Aurora Serverless v1 DB cluster.This property is only supported for Aurora Serverless v1. For Aurora Serverless v2, Use the
ServerlessV2ScalingConfiguration
property.Valid for: Aurora Serverless v1 DB clusters only
-
getServerlessV2ScalingConfiguration
The scaling configuration of an Aurora Serverless V2 DB cluster.This property is only supported for Aurora Serverless v2. For Aurora Serverless v1, Use the
ScalingConfiguration
property.Valid for: Aurora Serverless v2 DB clusters only
-
getSnapshotIdentifier
The identifier for the DB snapshot or DB cluster snapshot to restore from.You can use either the name or the Amazon Resource Name (ARN) to specify a DB cluster snapshot. However, you can use only the ARN to specify a DB snapshot.
After you restore a DB cluster with a
SnapshotIdentifier
property, you must specify the sameSnapshotIdentifier
property for any future updates to the DB cluster. When you specify this property for an update, the DB cluster is not restored from the snapshot again, and the data in the database is not changed. However, if you don't specify theSnapshotIdentifier
property, an empty DB cluster is created, and the original DB cluster is deleted. If you specify a property that is different from the previous snapshot restore property, a new DB cluster is restored from the specifiedSnapshotIdentifier
property, and the original DB cluster is deleted.If you specify the
SnapshotIdentifier
property to restore a DB cluster (as opposed to specifying it for DB cluster updates), then don't specify the following properties:GlobalClusterIdentifier
MasterUsername
MasterUserPassword
ReplicationSourceIdentifier
RestoreType
SourceDBClusterIdentifier
SourceRegion
StorageEncrypted
(for an encrypted snapshot)UseLatestRestorableTime
Constraints:
- Must match the identifier of an existing Snapshot.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getSourceDbClusterIdentifier
When restoring a DB cluster to a point in time, the identifier of the source DB cluster from which to restore.Constraints:
- Must match the identifier of an existing DBCluster.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getSourceRegion
The AWS Region which contains the source DB cluster when replicating a DB cluster. For example,us-east-1
.Valid for: Aurora DB clusters only
-
getStorageEncrypted
Indicates whether the DB cluster is encrypted.If you specify the
KmsKeyId
property, then you must enable encryption.If you specify the
SourceDBClusterIdentifier
property, don't specify this property. The value is inherited from the source DB cluster, and if the DB cluster is encrypted, the specifiedKmsKeyId
property is used.If you specify the
SnapshotIdentifier
and the specified snapshot is encrypted, don't specify this property. The value is inherited from the snapshot, and the specifiedKmsKeyId
property is used.If you specify the
SnapshotIdentifier
and the specified snapshot isn't encrypted, you can use this property to specify that the restored DB cluster is encrypted. Specify theKmsKeyId
property for the KMS key to use for encryption. If you don't want the restored DB cluster to be encrypted, then don't set this property or set it tofalse
.If you specify both the
StorageEncrypted
andSnapshotIdentifier
properties without specifying theKmsKeyId
property, then the restored DB cluster inherits the encryption settings from the DB snapshot that provide.Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getStorageType
The storage type to associate with the DB cluster.For information on storage types for Aurora DB clusters, see Storage configurations for Amazon Aurora DB clusters . For information on storage types for Multi-AZ DB clusters, see Settings for creating Multi-AZ DB clusters .
This setting is required to create a Multi-AZ DB cluster.
When specified for a Multi-AZ DB cluster, a value for the
Iops
parameter is required.Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters
Valid Values:
- Aurora DB clusters -
aurora | aurora-iopt1
- Multi-AZ DB clusters -
io1 | io2 | gp3
Default:
- Aurora DB clusters -
aurora
- Multi-AZ DB clusters -
io1
When you create an Aurora DB cluster with the storage type set to
aurora-iopt1
, the storage type is returned in the response. The storage type isn't returned when you set it toaurora
. - Aurora DB clusters -
-
getTags
Tags to assign to the DB cluster.Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters
-
getUseLatestRestorableTime
A value that indicates whether to restore the DB cluster to the latest restorable backup time.By default, the DB cluster is not restored to the latest restorable backup time.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
getVpcSecurityGroupIds
A list of EC2 VPC security groups to associate with this DB cluster.If you plan to update the resource, don't specify VPC security groups in a shared VPC.
Valid for: Aurora DB clusters and Multi-AZ DB clusters
-
builder
- Returns:
- a
CfnDBClusterProps.Builder
ofCfnDBClusterProps
-