CfnNetworkInterface

class aws_cdk.aws_ec2.CfnNetworkInterface(scope, id, *, subnet_id, description=None, group_set=None, interface_type=None, ipv6_address_count=None, ipv6_addresses=None, private_ip_address=None, private_ip_addresses=None, secondary_private_ip_address_count=None, source_dest_check=None, tags=None)

Bases: CfnResource

A CloudFormation AWS::EC2::NetworkInterface.

Describes a network interface in an Amazon EC2 instance for AWS CloudFormation .

CloudformationResource: AWS::EC2::NetworkInterface
Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html
ExampleMetadata: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_ec2 as ec2

cfn_network_interface = ec2.CfnNetworkInterface(self, "MyCfnNetworkInterface",
    subnet_id="subnetId",

    # the properties below are optional
    description="description",
    group_set=["groupSet"],
    interface_type="interfaceType",
    ipv6_address_count=123,
    ipv6_addresses=[ec2.CfnNetworkInterface.InstanceIpv6AddressProperty(
        ipv6_address="ipv6Address"
    )],
    private_ip_address="privateIpAddress",
    private_ip_addresses=[ec2.CfnNetworkInterface.PrivateIpAddressSpecificationProperty(
        primary=False,
        private_ip_address="privateIpAddress"
    )],
    secondary_private_ip_address_count=123,
    source_dest_check=False,
    tags=[CfnTag(
        key="key",
        value="value"
    )]
)

Create a new AWS::EC2::NetworkInterface.

Parameters

scope (Construct) –
- scope in which this resource is defined.
id (str) –
- scoped id of the resource.
subnet_id (str) – The ID of the subnet to associate with the network interface.
description (Optional[str]) – A description for the network interface.
group_set (Optional[Sequence[str]]) – The security group IDs associated with this network interface.
interface_type (Optional[str]) – The type of network interface. The default is interface . The supported values are efa and trunk .
ipv6_address_count (Union[int, float, None]) – The number of IPv6 addresses to assign to a network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range. To specify specific IPv6 addresses, use the Ipv6Addresses property and don’t specify this property.
ipv6_addresses (Union[IResolvable, Sequence[Union[IResolvable, InstanceIpv6AddressProperty, Dict[str, Any]]], None]) – One or more specific IPv6 addresses from the IPv6 CIDR block range of your subnet to associate with the network interface. If you’re specifying a number of IPv6 addresses, use the Ipv6AddressCount property and don’t specify this property.
private_ip_address (Optional[str]) – Assigns a single private IP address to the network interface, which is used as the primary private IP address. If you want to specify multiple private IP address, use the PrivateIpAddresses property.
private_ip_addresses (Union[IResolvable, Sequence[Union[IResolvable, PrivateIpAddressSpecificationProperty, Dict[str, Any]]], None]) – Assigns private IP addresses to the network interface. You can specify a primary private IP address by setting the value of the Primary property to true in the PrivateIpAddressSpecification property. If you want EC2 to automatically assign private IP addresses, use the SecondaryPrivateIpAddressCount property and do not specify this property.
secondary_private_ip_address_count (Union[int, float, None]) – The number of secondary private IPv4 addresses to assign to a network interface. When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet’s IPv4 CIDR range. You can’t specify this option and specify more than one private IP address using privateIpAddresses . The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Instance Type in the Amazon Virtual Private Cloud User Guide .
source_dest_check (Union[bool, IResolvable, None]) – Enable or disable source/destination checks, which ensure that the instance is either the source or the destination of any traffic that it receives. If the value is true , source/destination checks are enabled; otherwise, they are disabled. The default value is true . You must disable source/destination checks if the instance runs services such as network address translation, routing, or firewalls.
tags (Optional[Sequence[Union[CfnTag, Dict[str, Any]]]]) – An arbitrary set of tags (key-value pairs) for this network interface.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters: path (str) – The path of the value to delete.
Return type: None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters

target (CfnResource) –

Return type

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters

key (str) –
value (Any) –

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

Return type: None

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters: property_path (str) – The path to the property.
Return type: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters

property_path (str) – The path of the property.
value (Any) – The value.

Return type

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

Return type

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters: attribute_name (str) – The name of the attribute.
Return type: Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters

key (str) –

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

Return type: Any

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters

inspector (TreeInspector) –

tree inspector to collect and process attributes.

Return type

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters: new_logical_id (str) – The new logical ID to use for this stack element.
Return type: None

to_string()

Returns a string representation of this construct.

Return type: str
Returns: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::EC2::NetworkInterface'

attr_id

The ID of the network interface.

CloudformationAttribute: Id
Return type: str

attr_primary_private_ip_address

The primary private IP address of the network interface.

For example, 10.0.0.192 .

CloudformationAttribute: PrimaryPrivateIpAddress
Return type: str

attr_secondary_private_ip_addresses

The secondary private IP addresses of the network interface.

For example, ["10.0.0.161", "10.0.0.162", "10.0.0.163"] .

CloudformationAttribute: SecondaryPrivateIpAddresses
Return type: List[str]

cfn_options

Options for this resource, such as condition, update policy etc.

Return type: ICfnResourceOptions

cfn_resource_type

AWS resource type.

Return type: str

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

Return type: List[str]

description

A description for the network interface.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-description
Return type: Optional[str]

group_set

The security group IDs associated with this network interface.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-groupset
Return type: Optional[List[str]]

interface_type

The type of network interface.

The default is interface . The supported values are efa and trunk .

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-interfacetype
Return type: Optional[str]

ipv6_address_count

The number of IPv6 addresses to assign to a network interface.

Amazon EC2 automatically selects the IPv6 addresses from the subnet range. To specify specific IPv6 addresses, use the Ipv6Addresses property and don’t specify this property.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-ipv6addresscount
Return type: Union[int, float, None]

ipv6_addresses

One or more specific IPv6 addresses from the IPv6 CIDR block range of your subnet to associate with the network interface.

If you’re specifying a number of IPv6 addresses, use the Ipv6AddressCount property and don’t specify this property.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-ipv6addresses
Return type: Union[IResolvable, List[Union[IResolvable, InstanceIpv6AddressProperty]], None]

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Return type: str
Returns

the logical ID as a stringified token. This value will only get resolved during synthesis.

node

The construct tree node associated with this construct.

Return type: ConstructNode

private_ip_address

Assigns a single private IP address to the network interface, which is used as the primary private IP address.

If you want to specify multiple private IP address, use the PrivateIpAddresses property.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-privateipaddress
Return type: Optional[str]

private_ip_addresses

Assigns private IP addresses to the network interface.

You can specify a primary private IP address by setting the value of the Primary property to true in the PrivateIpAddressSpecification property. If you want EC2 to automatically assign private IP addresses, use the SecondaryPrivateIpAddressCount property and do not specify this property.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-privateipaddresses
Return type: Union[IResolvable, List[Union[IResolvable, PrivateIpAddressSpecificationProperty]], None]

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

Return type: str

secondary_private_ip_address_count

The number of secondary private IPv4 addresses to assign to a network interface.

When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet’s IPv4 CIDR range. You can’t specify this option and specify more than one private IP address using privateIpAddresses .

The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Instance Type in the Amazon Virtual Private Cloud User Guide .

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-secondaryprivateipaddresscount
Return type: Union[int, float, None]

source_dest_check

Enable or disable source/destination checks, which ensure that the instance is either the source or the destination of any traffic that it receives.

If the value is true , source/destination checks are enabled; otherwise, they are disabled. The default value is true . You must disable source/destination checks if the instance runs services such as network address translation, routing, or firewalls.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-sourcedestcheck
Return type: Union[bool, IResolvable, None]

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

Return type: Stack

subnet_id

The ID of the subnet to associate with the network interface.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-subnetid
Return type: str

tags

An arbitrary set of tags (key-value pairs) for this network interface.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkinterface.html#cfn-ec2-networkinterface-tags
Return type: TagManager

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters

x (Any) –

Return type

bool

Returns

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters

construct (IConstruct) –

Return type

bool

classmethod is_construct(x)

Return whether the given object is a Construct.

Parameters

x (Any) –

Return type

bool

InstanceIpv6AddressProperty

class CfnNetworkInterface.InstanceIpv6AddressProperty(*, ipv6_address)

Bases: object

Describes the IPv6 addresses to associate with the network interface.

Parameters: ipv6_address (str) – An IPv6 address to associate with the network interface.
Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkinterface-instanceipv6address.html
ExampleMetadata: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_ec2 as ec2

instance_ipv6_address_property = ec2.CfnNetworkInterface.InstanceIpv6AddressProperty(
    ipv6_address="ipv6Address"
)

Attributes

ipv6_address

An IPv6 address to associate with the network interface.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkinterface-instanceipv6address.html#cfn-ec2-networkinterface-instanceipv6address-ipv6address
Return type: str

PrivateIpAddressSpecificationProperty

class CfnNetworkInterface.PrivateIpAddressSpecificationProperty(*, primary, private_ip_address)

Bases: object

Describes a secondary private IPv4 address for a network interface.

Parameters

primary (Union[bool, IResolvable]) – Sets the private IP address as the primary private address. You can set only one primary private IP address. If you don’t specify a primary private IP address, Amazon EC2 automatically assigns a primary private IP address.
private_ip_address (str) – The private IP address of the network interface.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkinterface-privateipaddressspecification.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
import aws_cdk.aws_ec2 as ec2

private_ip_address_specification_property = ec2.CfnNetworkInterface.PrivateIpAddressSpecificationProperty(
    primary=False,
    private_ip_address="privateIpAddress"
)

Attributes

primary

Sets the private IP address as the primary private address.

You can set only one primary private IP address. If you don’t specify a primary private IP address, Amazon EC2 automatically assigns a primary private IP address.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkinterface-privateipaddressspecification.html#cfn-ec2-networkinterface-privateipaddressspecification-primary
Return type: Union[bool, IResolvable]

private_ip_address

The private IP address of the network interface.

Link: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkinterface-privateipaddressspecification.html#cfn-ec2-networkinterface-privateipaddressspecification-privateipaddress
Return type: str