CfnIdentity

class aws_cdk.aws_pinpointemail.CfnIdentity(scope, id, *, name, dkim_signing_enabled=None, feedback_forwarding_enabled=None, mail_from_attributes=None, tags=None)

Bases: CfnResource

Specifies an identity to use for sending email through Amazon Pinpoint.

In Amazon Pinpoint, an identity is an email address or domain that you use when you send email. Before you can use Amazon Pinpoint to send an email from an identity, you first have to verify it. By verifying an identity, you demonstrate that you’re the owner of the address or domain, and that you’ve given Amazon Pinpoint permission to send email from that identity.

When you verify an email address, Amazon Pinpoint sends an email to the address. Your email address is verified as soon as you follow the link in the verification email.

When you verify a domain, this operation provides a set of DKIM tokens, which you can convert into CNAME tokens. You add these CNAME tokens to the DNS configuration for your domain. Your domain is verified when Amazon Pinpoint detects these records in the DNS configuration for your domain. It usually takes around 72 hours to complete the domain verification process. .. epigraph:

When you use CloudFormation to specify an identity, CloudFormation might indicate that the identity was created successfully. However, you have to verify the identity before you can use it to send email.
See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-pinpointemail-identity.html

CloudformationResource:

AWS::PinpointEmail::Identity

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_pinpointemail as pinpointemail

cfn_identity = pinpointemail.CfnIdentity(self, "MyCfnIdentity",
    name="name",

    # the properties below are optional
    dkim_signing_enabled=False,
    feedback_forwarding_enabled=False,
    mail_from_attributes=pinpointemail.CfnIdentity.MailFromAttributesProperty(
        behavior_on_mx_failure="behaviorOnMxFailure",
        mail_from_domain="mailFromDomain"
    ),
    tags=[CfnTag(
        key="key",
        value="value"
    )]
)
Parameters:
  • scope (Construct) – Scope in which this resource is defined.

  • id (str) – Construct identifier for this resource (unique in its scope).

  • name (str) – The address or domain of the identity, such as sender@example.com or example.co.uk .

  • dkim_signing_enabled (Union[bool, IResolvable, None]) – For domain identities, this attribute is used to enable or disable DomainKeys Identified Mail (DKIM) signing for the domain. If the value is true , then the messages that you send from the domain are signed using both the DKIM keys for your domain, as well as the keys for the amazonses.com domain. If the value is false , then the messages that you send are only signed using the DKIM keys for the amazonses.com domain.

  • feedback_forwarding_enabled (Union[bool, IResolvable, None]) – Used to enable or disable feedback forwarding for an identity. This setting determines what happens when an identity is used to send an email that results in a bounce or complaint event. When you enable feedback forwarding, Amazon Pinpoint sends you email notifications when bounce or complaint events occur. Amazon Pinpoint sends this notification to the address that you specified in the Return-Path header of the original email. When you disable feedback forwarding, Amazon Pinpoint sends notifications through other mechanisms, such as by notifying an Amazon SNS topic. You’re required to have a method of tracking bounces and complaints. If you haven’t set up another mechanism for receiving bounce or complaint notifications, Amazon Pinpoint sends an email notification when these events occur (even if this setting is disabled).

  • mail_from_attributes (Union[IResolvable, MailFromAttributesProperty, Dict[str, Any], None]) – Used to enable or disable the custom Mail-From domain configuration for an email identity.

  • tags (Optional[Sequence[Union[CfnTag, Dict[str, Any]]]]) – An object that defines the tags (keys and values) that you want to associate with the email identity.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:

path (str) – The path of the value to delete.

Return type:

None

add_dependency(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_depends_on(target)

(deprecated) Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

Parameters:

target (CfnResource) –

Deprecated:

use addDependency

Stability:

deprecated

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:
  • key (str) –

  • value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
  "GlobalSecondaryIndexes": [
    {
      "Projection": {
        "NonKeyAttributes": [ "myattribute" ]
        ...
      }
      ...
    },
    {
      "ProjectionType": "INCLUDE"
      ...
    },
  ]
  ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:
  • path (str) –

    • The path of the property, you can use dot notation to override values in complex types. Any intermediate keys will be created as needed.

  • value (Any) –

    • The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:

property_path (str) – The path to the property.

Return type:

None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:
  • property_path (str) – The path of the property.

  • value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:

Parameters:
  • policy (Optional[RemovalPolicy]) –

  • apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true

  • default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resource, please consult that specific resource’s documentation.

See:

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options

Return type:

None

get_att(attribute_name, type_hint=None)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:
  • attribute_name (str) – The name of the attribute.

  • type_hint (Optional[ResolutionTypeHint]) –

Return type:

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:

inspector (TreeInspector) – tree inspector to collect and process attributes.

Return type:

None

obtain_dependencies()

Retrieves an array of resources this resource depends on.

This assembles dependencies on resources across stacks (including nested stacks) automatically.

Return type:

List[Union[Stack, CfnResource]]

obtain_resource_dependencies()

Get a shallow copy of dependencies between this resource and other resources in the same stack.

Return type:

List[CfnResource]

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:

new_logical_id (str) – The new logical ID to use for this stack element.

Return type:

None

remove_dependency(target)

Indicates that this resource no longer depends on another resource.

This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

replace_dependency(target, new_target)

Replaces one dependency with another.

Parameters:
Return type:

None

to_string()

Returns a string representation of this construct.

Return type:

str

Returns:

a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::PinpointEmail::Identity'
attr_id

Id

Type:

cloudformationAttribute

attr_identity_dns_record_name1

The host name for the first token that you have to add to the DNS configuration for your domain.

For more information, see Verifying a Domain in the Amazon Pinpoint User Guide.

CloudformationAttribute:

IdentityDNSRecordName1

attr_identity_dns_record_name2

The host name for the second token that you have to add to the DNS configuration for your domain.

CloudformationAttribute:

IdentityDNSRecordName2

attr_identity_dns_record_name3

The host name for the third token that you have to add to the DNS configuration for your domain.

CloudformationAttribute:

IdentityDNSRecordName3

attr_identity_dns_record_value1

The record value for the first token that you have to add to the DNS configuration for your domain.

CloudformationAttribute:

IdentityDNSRecordValue1

attr_identity_dns_record_value2

The record value for the second token that you have to add to the DNS configuration for your domain.

CloudformationAttribute:

IdentityDNSRecordValue2

attr_identity_dns_record_value3

The record value for the third token that you have to add to the DNS configuration for your domain.

CloudformationAttribute:

IdentityDNSRecordValue3

cdk_tag_manager

Tag Manager which manages the tags for this resource.

cfn_options

Options for this resource, such as condition, update policy etc.

cfn_resource_type

AWS resource type.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

dkim_signing_enabled

For domain identities, this attribute is used to enable or disable DomainKeys Identified Mail (DKIM) signing for the domain.

feedback_forwarding_enabled

Used to enable or disable feedback forwarding for an identity.

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

mail_from_attributes

Used to enable or disable the custom Mail-From domain configuration for an email identity.

name

The address or domain of the identity, such as sender@example.com or example.co.uk .

node

The tree node.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

tags

An object that defines the tags (keys and values) that you want to associate with the email identity.

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(x)

Check whether the given object is a CfnResource.

Parameters:

x (Any) –

Return type:

bool

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:

x (Any) – Any object.

Return type:

bool

Returns:

true if x is an object created from a class which extends Construct.

MailFromAttributesProperty

class CfnIdentity.MailFromAttributesProperty(*, behavior_on_mx_failure=None, mail_from_domain=None)

Bases: object

A list of attributes that are associated with a MAIL FROM domain.

Parameters:
  • behavior_on_mx_failure (Optional[str]) – The action that Amazon Pinpoint to takes if it can’t read the required MX record for a custom MAIL FROM domain. When you set this value to UseDefaultValue , Amazon Pinpoint uses amazonses.com as the MAIL FROM domain. When you set this value to RejectMessage , Amazon Pinpoint returns a MailFromDomainNotVerified error, and doesn’t attempt to deliver the email. These behaviors are taken when the custom MAIL FROM domain configuration is in the Pending , Failed , and TemporaryFailure states.

  • mail_from_domain (Optional[str]) – The name of a domain that an email identity uses as a custom MAIL FROM domain.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-pinpointemail-identity-mailfromattributes.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_pinpointemail as pinpointemail

mail_from_attributes_property = pinpointemail.CfnIdentity.MailFromAttributesProperty(
    behavior_on_mx_failure="behaviorOnMxFailure",
    mail_from_domain="mailFromDomain"
)

Attributes

behavior_on_mx_failure

The action that Amazon Pinpoint to takes if it can’t read the required MX record for a custom MAIL FROM domain.

When you set this value to UseDefaultValue , Amazon Pinpoint uses amazonses.com as the MAIL FROM domain. When you set this value to RejectMessage , Amazon Pinpoint returns a MailFromDomainNotVerified error, and doesn’t attempt to deliver the email.

These behaviors are taken when the custom MAIL FROM domain configuration is in the Pending , Failed , and TemporaryFailure states.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-pinpointemail-identity-mailfromattributes.html#cfn-pinpointemail-identity-mailfromattributes-behavioronmxfailure

mail_from_domain

The name of a domain that an email identity uses as a custom MAIL FROM domain.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-pinpointemail-identity-mailfromattributes.html#cfn-pinpointemail-identity-mailfromattributes-mailfromdomain