Topic
- class aws_cdk.aws_sns.Topic(scope, id, *, content_based_deduplication=None, display_name=None, enforce_ssl=None, fifo=None, logging_configs=None, master_key=None, message_retention_period_in_days=None, signature_version=None, topic_name=None, tracing_config=None)
Bases:
TopicBase
A new SNS topic.
- ExampleMetadata:
infused
Example:
from aws_cdk.aws_kinesisfirehose_alpha import DeliveryStream # stream: DeliveryStream topic = sns.Topic(self, "Topic") sns.Subscription(self, "Subscription", topic=topic, endpoint=stream.delivery_stream_arn, protocol=sns.SubscriptionProtocol.FIREHOSE, subscription_role_arn="SAMPLE_ARN" )
- Parameters:
scope (
Construct
) –id (
str
) –content_based_deduplication (
Optional
[bool
]) – Enables content-based deduplication for FIFO topics. Default: Nonedisplay_name (
Optional
[str
]) – A developer-defined string that can be used to identify this SNS topic. The display name must be maximum 100 characters long, including hyphens (-), underscores (_), spaces, and tabs. Default: Noneenforce_ssl (
Optional
[bool
]) – Adds a statement to enforce encryption of data in transit when publishing to the topic. Default: falsefifo (
Optional
[bool
]) – Set to true to create a FIFO topic. Default: Nonelogging_configs (
Optional
[Sequence
[Union
[LoggingConfig
,Dict
[str
,Any
]]]]) – The list of delivery status logging configurations for the topic. Default: Nonemaster_key (
Optional
[IKey
]) – A KMS Key, either managed by this CDK app, or imported. Default: Nonemessage_retention_period_in_days (
Union
[int
,float
,None
]) – The number of days Amazon SNS retains messages. It can only be set for FIFO topics. Default: - do not archive messagessignature_version (
Optional
[str
]) – The signature version corresponds to the hashing algorithm used while creating the signature of the notifications, subscription confirmations, or unsubscribe confirmation messages sent by Amazon SNS. Default: 1topic_name (
Optional
[str
]) – A name for the topic. If you don’t specify a name, AWS CloudFormation generates a unique physical ID and uses that ID for the topic name. For more information, see Name Type. Default: Generated nametracing_config (
Optional
[TracingConfig
]) – Tracing mode of an Amazon SNS topic. Default: TracingConfig.PASS_THROUGH
Methods
- add_logging_config(*, protocol, failure_feedback_role=None, success_feedback_role=None, success_feedback_sample_rate=None)
Adds a delivery status logging configuration to the topic.
- Parameters:
protocol (
LoggingProtocol
) – Indicates one of the supported protocols for the SNS topic.failure_feedback_role (
Optional
[IRole
]) – The IAM role to be used when logging failed message deliveries in Amazon CloudWatch. Default: Nonesuccess_feedback_role (
Optional
[IRole
]) – The IAM role to be used when logging successful message deliveries in Amazon CloudWatch. Default: Nonesuccess_feedback_sample_rate (
Union
[int
,float
,None
]) – The percentage of successful message deliveries to be logged in Amazon CloudWatch. Valid values are integer between 0-100 Default: None
- Return type:
None
- add_subscription(topic_subscription)
Subscribe some endpoint to this topic.
- Parameters:
topic_subscription (
ITopicSubscription
) –- Return type:
- add_to_resource_policy(statement)
Adds a statement to the IAM resource policy associated with this topic.
If this topic was created in this stack (
new Topic
), a topic policy will be automatically created upon the first call toaddToResourcePolicy
. If the topic is imported (Topic.import
), then this is a no-op.- Parameters:
statement (
PolicyStatement
) –- Return type:
- apply_removal_policy(policy)
Apply the given removal policy to this resource.
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.
The resource can be deleted (
RemovalPolicy.DESTROY
), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN
).- Parameters:
policy (
RemovalPolicy
) –- Return type:
None
- bind_as_notification_rule_target(_scope)
Represents a notification target That allows SNS topic to associate with this rule target.
- Parameters:
_scope (
Construct
) –- Return type:
- grant_publish(grantee)
Grant topic publishing permissions to the given identity.
- Parameters:
grantee (
IGrantable
) –- Return type:
- grant_subscribe(grantee)
Grant topic subscribing permissions to the given identity.
- Parameters:
grantee (
IGrantable
) –- Return type:
- metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Return the given named metric for this Topic.
- Parameters:
metric_name (
str
) –account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No labelperiod (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_number_of_messages_published(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The number of messages published to your Amazon SNS topics.
Sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_number_of_notifications_delivered(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The number of messages successfully delivered from your Amazon SNS topics to subscribing endpoints.
Sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_number_of_notifications_failed(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The number of messages that Amazon SNS failed to deliver.
Sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_number_of_notifications_filtered_out(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The number of messages that were rejected by subscription filter policies.
Sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_number_of_notifications_filtered_out_invalid_attributes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The number of messages that were rejected by subscription filter policies because the messages’ attributes are invalid.
Sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_number_of_notifications_filtered_out_no_message_attributes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The number of messages that were rejected by subscription filter policies because the messages have no attributes.
Sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_publish_size(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the size of messages published through this topic.
Average over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_sms_month_to_date_spent_usd(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The charges you have accrued since the start of the current calendar month for sending SMS messages.
Maximum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_sms_success_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The rate of successful SMS message deliveries.
Sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- to_string()
Returns a string representation of this construct.
- Return type:
str
Attributes
- content_based_deduplication
Enables content-based deduplication for FIFO topics.
- env
The environment this resource belongs to.
For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.
- fifo
Whether this topic is an Amazon SNS FIFO queue.
If false, this is a standard topic.
- node
The tree node.
- stack
The stack in which this resource is defined.
- topic_arn
The ARN of the topic.
- topic_name
The name of the topic.
Static Methods
- classmethod from_topic_arn(scope, id, topic_arn)
Import an existing SNS topic provided an ARN.
- classmethod from_topic_attributes(scope, id, *, topic_arn, content_based_deduplication=None)
Import an existing SNS topic provided a topic attributes.
- Parameters:
scope (
Construct
) – The parent creating construct.id (
str
) – The construct’s name.topic_arn (
str
) – The ARN of the SNS topic.content_based_deduplication (
Optional
[bool
]) – Whether content-based deduplication is enabled. Only applicable for FIFO topics. Default: false
- Return type:
- classmethod is_construct(x)
Checks if
x
is a construct.Use this method instead of
instanceof
to properly detectConstruct
instances, even when the construct library is symlinked.Explanation: in JavaScript, multiple copies of the
constructs
library on disk are seen as independent, completely different libraries. As a consequence, the classConstruct
in each copy of theconstructs
library is seen as a different class, and an instance of one class will not test asinstanceof
the other class.npm install
will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of theconstructs
library can be accidentally installed, andinstanceof
will behave unpredictably. It is safest to avoid usinginstanceof
, and using this type-testing method instead.- Parameters:
x (
Any
) – Any object.- Return type:
bool
- Returns:
true if
x
is an object created from a class which extendsConstruct
.
- classmethod is_owned_resource(construct)
Returns true if the construct was created by CDK, and false otherwise.
- Parameters:
construct (
IConstruct
) –- Return type:
bool
- classmethod is_resource(construct)
Check whether the given construct is a Resource.
- Parameters:
construct (
IConstruct
) –- Return type:
bool