CfnConfig

class aws_cdk.aws_groundstation.CfnConfig(scope, id, *, config_data, name, tags=None)

Bases: CfnResource

Creates a Config with the specified parameters.

Config objects provide Ground Station with the details necessary in order to schedule and execute satellite contacts.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-groundstation-config.html

CloudformationResource:

AWS::GroundStation::Config

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

cfn_config = groundstation.CfnConfig(self, "MyCfnConfig",
    config_data=groundstation.CfnConfig.ConfigDataProperty(
        antenna_downlink_config=groundstation.CfnConfig.AntennaDownlinkConfigProperty(
            spectrum_config=groundstation.CfnConfig.SpectrumConfigProperty(
                bandwidth=groundstation.CfnConfig.FrequencyBandwidthProperty(
                    units="units",
                    value=123
                ),
                center_frequency=groundstation.CfnConfig.FrequencyProperty(
                    units="units",
                    value=123
                ),
                polarization="polarization"
            )
        ),
        antenna_downlink_demod_decode_config=groundstation.CfnConfig.AntennaDownlinkDemodDecodeConfigProperty(
            decode_config=groundstation.CfnConfig.DecodeConfigProperty(
                unvalidated_json="unvalidatedJson"
            ),
            demodulation_config=groundstation.CfnConfig.DemodulationConfigProperty(
                unvalidated_json="unvalidatedJson"
            ),
            spectrum_config=groundstation.CfnConfig.SpectrumConfigProperty(
                bandwidth=groundstation.CfnConfig.FrequencyBandwidthProperty(
                    units="units",
                    value=123
                ),
                center_frequency=groundstation.CfnConfig.FrequencyProperty(
                    units="units",
                    value=123
                ),
                polarization="polarization"
            )
        ),
        antenna_uplink_config=groundstation.CfnConfig.AntennaUplinkConfigProperty(
            spectrum_config=groundstation.CfnConfig.UplinkSpectrumConfigProperty(
                center_frequency=groundstation.CfnConfig.FrequencyProperty(
                    units="units",
                    value=123
                ),
                polarization="polarization"
            ),
            target_eirp=groundstation.CfnConfig.EirpProperty(
                units="units",
                value=123
            ),
            transmit_disabled=False
        ),
        dataflow_endpoint_config=groundstation.CfnConfig.DataflowEndpointConfigProperty(
            dataflow_endpoint_name="dataflowEndpointName",
            dataflow_endpoint_region="dataflowEndpointRegion"
        ),
        s3_recording_config=groundstation.CfnConfig.S3RecordingConfigProperty(
            bucket_arn="bucketArn",
            prefix="prefix",
            role_arn="roleArn"
        ),
        tracking_config=groundstation.CfnConfig.TrackingConfigProperty(
            autotrack="autotrack"
        ),
        uplink_echo_config=groundstation.CfnConfig.UplinkEchoConfigProperty(
            antenna_uplink_config_arn="antennaUplinkConfigArn",
            enabled=False
        )
    ),
    name="name",

    # the properties below are optional
    tags=[CfnTag(
        key="key",
        value="value"
    )]
)
Parameters:
  • scope (Construct) – Scope in which this resource is defined.

  • id (str) – Construct identifier for this resource (unique in its scope).

  • config_data (Union[IResolvable, ConfigDataProperty, Dict[str, Any]]) – Object containing the parameters of a config. Only one subtype may be specified per config. See the subtype definitions for a description of each config subtype.

  • name (str) – The name of the config object.

  • tags (Optional[Sequence[Union[CfnTag, Dict[str, Any]]]]) – Tags assigned to a resource.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:

path (str) – The path of the value to delete.

Return type:

None

add_dependency(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_depends_on(target)

(deprecated) Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

Parameters:

target (CfnResource) –

Deprecated:

use addDependency

Stability:

deprecated

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:
  • key (str) –

  • value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
  "GlobalSecondaryIndexes": [
    {
      "Projection": {
        "NonKeyAttributes": [ "myattribute" ]
        ...
      }
      ...
    },
    {
      "ProjectionType": "INCLUDE"
      ...
    },
  ]
  ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:
  • path (str) –

    • The path of the property, you can use dot notation to override values in complex types. Any intermediate keys will be created as needed.

  • value (Any) –

    • The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:

property_path (str) – The path to the property.

Return type:

None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:
  • property_path (str) – The path of the property.

  • value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:

Parameters:
  • policy (Optional[RemovalPolicy]) –

  • apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true

  • default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resource, please consult that specific resource’s documentation.

See:

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options

Return type:

None

get_att(attribute_name, type_hint=None)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:
  • attribute_name (str) – The name of the attribute.

  • type_hint (Optional[ResolutionTypeHint]) –

Return type:

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:

inspector (TreeInspector) – tree inspector to collect and process attributes.

Return type:

None

obtain_dependencies()

Retrieves an array of resources this resource depends on.

This assembles dependencies on resources across stacks (including nested stacks) automatically.

Return type:

List[Union[Stack, CfnResource]]

obtain_resource_dependencies()

Get a shallow copy of dependencies between this resource and other resources in the same stack.

Return type:

List[CfnResource]

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:

new_logical_id (str) – The new logical ID to use for this stack element.

Return type:

None

remove_dependency(target)

Indicates that this resource no longer depends on another resource.

This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

replace_dependency(target, new_target)

Replaces one dependency with another.

Parameters:
Return type:

None

to_string()

Returns a string representation of this construct.

Return type:

str

Returns:

a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::GroundStation::Config'
attr_arn

The ARN of the config, such as arn:aws:groundstation:us-east-2:1234567890:config/tracking/9940bf3b-d2ba-427e-9906-842b5e5d2296 .

CloudformationAttribute:

Arn

attr_id

The ID of the config, such as 9940bf3b-d2ba-427e-9906-842b5e5d2296 .

CloudformationAttribute:

Id

attr_type

The type of the config, such as tracking .

CloudformationAttribute:

Type

cfn_options

Options for this resource, such as condition, update policy etc.

cfn_resource_type

AWS resource type.

config_data

Object containing the parameters of a config.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

name

The name of the config object.

node

The tree node.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

tags

Tag Manager which manages the tags for this resource.

tags_raw

Tags assigned to a resource.

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(x)

Check whether the given object is a CfnResource.

Parameters:

x (Any) –

Return type:

bool

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:

x (Any) – Any object.

Return type:

bool

Returns:

true if x is an object created from a class which extends Construct.

AntennaDownlinkConfigProperty

class CfnConfig.AntennaDownlinkConfigProperty(*, spectrum_config=None)

Bases: object

Provides information about how AWS Ground Station should configure an antenna for downlink during a contact.

Use an antenna downlink config in a mission profile to receive the downlink data in raw DigIF format.

Parameters:

spectrum_config (Union[IResolvable, SpectrumConfigProperty, Dict[str, Any], None]) – Defines the spectrum configuration.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennadownlinkconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

antenna_downlink_config_property = groundstation.CfnConfig.AntennaDownlinkConfigProperty(
    spectrum_config=groundstation.CfnConfig.SpectrumConfigProperty(
        bandwidth=groundstation.CfnConfig.FrequencyBandwidthProperty(
            units="units",
            value=123
        ),
        center_frequency=groundstation.CfnConfig.FrequencyProperty(
            units="units",
            value=123
        ),
        polarization="polarization"
    )
)

Attributes

spectrum_config

Defines the spectrum configuration.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennadownlinkconfig.html#cfn-groundstation-config-antennadownlinkconfig-spectrumconfig

AntennaDownlinkDemodDecodeConfigProperty

class CfnConfig.AntennaDownlinkDemodDecodeConfigProperty(*, decode_config=None, demodulation_config=None, spectrum_config=None)

Bases: object

Provides information about how AWS Ground Station should configure an antenna for downlink during a contact.

Use an antenna downlink demod decode config in a mission profile to receive the downlink data that has been demodulated and decoded.

Parameters:
See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennadownlinkdemoddecodeconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

antenna_downlink_demod_decode_config_property = groundstation.CfnConfig.AntennaDownlinkDemodDecodeConfigProperty(
    decode_config=groundstation.CfnConfig.DecodeConfigProperty(
        unvalidated_json="unvalidatedJson"
    ),
    demodulation_config=groundstation.CfnConfig.DemodulationConfigProperty(
        unvalidated_json="unvalidatedJson"
    ),
    spectrum_config=groundstation.CfnConfig.SpectrumConfigProperty(
        bandwidth=groundstation.CfnConfig.FrequencyBandwidthProperty(
            units="units",
            value=123
        ),
        center_frequency=groundstation.CfnConfig.FrequencyProperty(
            units="units",
            value=123
        ),
        polarization="polarization"
    )
)

Attributes

decode_config

Defines how the RF signal will be decoded.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennadownlinkdemoddecodeconfig.html#cfn-groundstation-config-antennadownlinkdemoddecodeconfig-decodeconfig

demodulation_config

Defines how the RF signal will be demodulated.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennadownlinkdemoddecodeconfig.html#cfn-groundstation-config-antennadownlinkdemoddecodeconfig-demodulationconfig

spectrum_config

Defines the spectrum configuration.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennadownlinkdemoddecodeconfig.html#cfn-groundstation-config-antennadownlinkdemoddecodeconfig-spectrumconfig

AntennaUplinkConfigProperty

class CfnConfig.AntennaUplinkConfigProperty(*, spectrum_config=None, target_eirp=None, transmit_disabled=None)

Bases: object

Provides information about how AWS Ground Station should configure an antenna for uplink during a contact.

Parameters:
  • spectrum_config (Union[IResolvable, UplinkSpectrumConfigProperty, Dict[str, Any], None]) – Defines the spectrum configuration.

  • target_eirp (Union[IResolvable, EirpProperty, Dict[str, Any], None]) – The equivalent isotropically radiated power (EIRP) to use for uplink transmissions. Valid values are between 20.0 to 50.0 dBW.

  • transmit_disabled (Union[bool, IResolvable, None]) – Whether or not uplink transmit is disabled.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennauplinkconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

antenna_uplink_config_property = groundstation.CfnConfig.AntennaUplinkConfigProperty(
    spectrum_config=groundstation.CfnConfig.UplinkSpectrumConfigProperty(
        center_frequency=groundstation.CfnConfig.FrequencyProperty(
            units="units",
            value=123
        ),
        polarization="polarization"
    ),
    target_eirp=groundstation.CfnConfig.EirpProperty(
        units="units",
        value=123
    ),
    transmit_disabled=False
)

Attributes

spectrum_config

Defines the spectrum configuration.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennauplinkconfig.html#cfn-groundstation-config-antennauplinkconfig-spectrumconfig

target_eirp

The equivalent isotropically radiated power (EIRP) to use for uplink transmissions.

Valid values are between 20.0 to 50.0 dBW.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennauplinkconfig.html#cfn-groundstation-config-antennauplinkconfig-targeteirp

transmit_disabled

Whether or not uplink transmit is disabled.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-antennauplinkconfig.html#cfn-groundstation-config-antennauplinkconfig-transmitdisabled

ConfigDataProperty

class CfnConfig.ConfigDataProperty(*, antenna_downlink_config=None, antenna_downlink_demod_decode_config=None, antenna_uplink_config=None, dataflow_endpoint_config=None, s3_recording_config=None, tracking_config=None, uplink_echo_config=None)

Bases: object

Config objects provide information to Ground Station about how to configure the antenna and how data flows during a contact.

Parameters:
  • antenna_downlink_config (Union[IResolvable, AntennaDownlinkConfigProperty, Dict[str, Any], None]) – Provides information for an antenna downlink config object. Antenna downlink config objects are used to provide parameters for downlinks where no demodulation or decoding is performed by Ground Station (RF over IP downlinks).

  • antenna_downlink_demod_decode_config (Union[IResolvable, AntennaDownlinkDemodDecodeConfigProperty, Dict[str, Any], None]) – Provides information for a downlink demod decode config object. Downlink demod decode config objects are used to provide parameters for downlinks where the Ground Station service will demodulate and decode the downlinked data.

  • antenna_uplink_config (Union[IResolvable, AntennaUplinkConfigProperty, Dict[str, Any], None]) – Provides information for an uplink config object. Uplink config objects are used to provide parameters for uplink contacts.

  • dataflow_endpoint_config (Union[IResolvable, DataflowEndpointConfigProperty, Dict[str, Any], None]) – Provides information for a dataflow endpoint config object. Dataflow endpoint config objects are used to provide parameters about which IP endpoint(s) to use during a contact. Dataflow endpoints are where Ground Station sends data during a downlink contact and where Ground Station receives data to send to the satellite during an uplink contact.

  • s3_recording_config (Union[IResolvable, S3RecordingConfigProperty, Dict[str, Any], None]) – Provides information for an S3 recording config object. S3 recording config objects are used to provide parameters for S3 recording during downlink contacts.

  • tracking_config (Union[IResolvable, TrackingConfigProperty, Dict[str, Any], None]) – Provides information for a tracking config object. Tracking config objects are used to provide parameters about how to track the satellite through the sky during a contact.

  • uplink_echo_config (Union[IResolvable, UplinkEchoConfigProperty, Dict[str, Any], None]) – Provides information for an uplink echo config object. Uplink echo config objects are used to provide parameters for uplink echo during uplink contacts.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

config_data_property = groundstation.CfnConfig.ConfigDataProperty(
    antenna_downlink_config=groundstation.CfnConfig.AntennaDownlinkConfigProperty(
        spectrum_config=groundstation.CfnConfig.SpectrumConfigProperty(
            bandwidth=groundstation.CfnConfig.FrequencyBandwidthProperty(
                units="units",
                value=123
            ),
            center_frequency=groundstation.CfnConfig.FrequencyProperty(
                units="units",
                value=123
            ),
            polarization="polarization"
        )
    ),
    antenna_downlink_demod_decode_config=groundstation.CfnConfig.AntennaDownlinkDemodDecodeConfigProperty(
        decode_config=groundstation.CfnConfig.DecodeConfigProperty(
            unvalidated_json="unvalidatedJson"
        ),
        demodulation_config=groundstation.CfnConfig.DemodulationConfigProperty(
            unvalidated_json="unvalidatedJson"
        ),
        spectrum_config=groundstation.CfnConfig.SpectrumConfigProperty(
            bandwidth=groundstation.CfnConfig.FrequencyBandwidthProperty(
                units="units",
                value=123
            ),
            center_frequency=groundstation.CfnConfig.FrequencyProperty(
                units="units",
                value=123
            ),
            polarization="polarization"
        )
    ),
    antenna_uplink_config=groundstation.CfnConfig.AntennaUplinkConfigProperty(
        spectrum_config=groundstation.CfnConfig.UplinkSpectrumConfigProperty(
            center_frequency=groundstation.CfnConfig.FrequencyProperty(
                units="units",
                value=123
            ),
            polarization="polarization"
        ),
        target_eirp=groundstation.CfnConfig.EirpProperty(
            units="units",
            value=123
        ),
        transmit_disabled=False
    ),
    dataflow_endpoint_config=groundstation.CfnConfig.DataflowEndpointConfigProperty(
        dataflow_endpoint_name="dataflowEndpointName",
        dataflow_endpoint_region="dataflowEndpointRegion"
    ),
    s3_recording_config=groundstation.CfnConfig.S3RecordingConfigProperty(
        bucket_arn="bucketArn",
        prefix="prefix",
        role_arn="roleArn"
    ),
    tracking_config=groundstation.CfnConfig.TrackingConfigProperty(
        autotrack="autotrack"
    ),
    uplink_echo_config=groundstation.CfnConfig.UplinkEchoConfigProperty(
        antenna_uplink_config_arn="antennaUplinkConfigArn",
        enabled=False
    )
)

Attributes

Provides information for an antenna downlink config object.

Antenna downlink config objects are used to provide parameters for downlinks where no demodulation or decoding is performed by Ground Station (RF over IP downlinks).

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html#cfn-groundstation-config-configdata-antennadownlinkconfig

Provides information for a downlink demod decode config object.

Downlink demod decode config objects are used to provide parameters for downlinks where the Ground Station service will demodulate and decode the downlinked data.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html#cfn-groundstation-config-configdata-antennadownlinkdemoddecodeconfig

Provides information for an uplink config object.

Uplink config objects are used to provide parameters for uplink contacts.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html#cfn-groundstation-config-configdata-antennauplinkconfig

dataflow_endpoint_config

Provides information for a dataflow endpoint config object.

Dataflow endpoint config objects are used to provide parameters about which IP endpoint(s) to use during a contact. Dataflow endpoints are where Ground Station sends data during a downlink contact and where Ground Station receives data to send to the satellite during an uplink contact.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html#cfn-groundstation-config-configdata-dataflowendpointconfig

s3_recording_config

Provides information for an S3 recording config object.

S3 recording config objects are used to provide parameters for S3 recording during downlink contacts.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html#cfn-groundstation-config-configdata-s3recordingconfig

tracking_config

Provides information for a tracking config object.

Tracking config objects are used to provide parameters about how to track the satellite through the sky during a contact.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html#cfn-groundstation-config-configdata-trackingconfig

Provides information for an uplink echo config object.

Uplink echo config objects are used to provide parameters for uplink echo during uplink contacts.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-configdata.html#cfn-groundstation-config-configdata-uplinkechoconfig

DataflowEndpointConfigProperty

class CfnConfig.DataflowEndpointConfigProperty(*, dataflow_endpoint_name=None, dataflow_endpoint_region=None)

Bases: object

Provides information to AWS Ground Station about which IP endpoints to use during a contact.

Parameters:
  • dataflow_endpoint_name (Optional[str]) – The name of the dataflow endpoint to use during contacts.

  • dataflow_endpoint_region (Optional[str]) – The region of the dataflow endpoint to use during contacts. When omitted, Ground Station will use the region of the contact.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-dataflowendpointconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

dataflow_endpoint_config_property = groundstation.CfnConfig.DataflowEndpointConfigProperty(
    dataflow_endpoint_name="dataflowEndpointName",
    dataflow_endpoint_region="dataflowEndpointRegion"
)

Attributes

dataflow_endpoint_name

The name of the dataflow endpoint to use during contacts.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-dataflowendpointconfig.html#cfn-groundstation-config-dataflowendpointconfig-dataflowendpointname

dataflow_endpoint_region

The region of the dataflow endpoint to use during contacts.

When omitted, Ground Station will use the region of the contact.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-dataflowendpointconfig.html#cfn-groundstation-config-dataflowendpointconfig-dataflowendpointregion

DecodeConfigProperty

class CfnConfig.DecodeConfigProperty(*, unvalidated_json=None)

Bases: object

Defines decoding settings.

Parameters:

unvalidated_json (Optional[str]) –

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-decodeconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

decode_config_property = groundstation.CfnConfig.DecodeConfigProperty(
    unvalidated_json="unvalidatedJson"
)

Attributes

unvalidated_json

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-decodeconfig.html#cfn-groundstation-config-decodeconfig-unvalidatedjson

Type:

see

DemodulationConfigProperty

class CfnConfig.DemodulationConfigProperty(*, unvalidated_json=None)

Bases: object

Defines demodulation settings.

Parameters:

unvalidated_json (Optional[str]) –

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-demodulationconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

demodulation_config_property = groundstation.CfnConfig.DemodulationConfigProperty(
    unvalidated_json="unvalidatedJson"
)

Attributes

unvalidated_json

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-demodulationconfig.html#cfn-groundstation-config-demodulationconfig-unvalidatedjson

Type:

see

EirpProperty

class CfnConfig.EirpProperty(*, units=None, value=None)

Bases: object

Defines an equivalent isotropically radiated power (EIRP).

Parameters:
  • units (Optional[str]) – The units of the EIRP.

  • value (Union[int, float, None]) – The value of the EIRP. Valid values are between 20.0 to 50.0 dBW.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-eirp.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

eirp_property = groundstation.CfnConfig.EirpProperty(
    units="units",
    value=123
)

Attributes

units

The units of the EIRP.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-eirp.html#cfn-groundstation-config-eirp-units

value

The value of the EIRP.

Valid values are between 20.0 to 50.0 dBW.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-eirp.html#cfn-groundstation-config-eirp-value

FrequencyBandwidthProperty

class CfnConfig.FrequencyBandwidthProperty(*, units=None, value=None)

Bases: object

Defines a bandwidth.

Parameters:
  • units (Optional[str]) – The units of the bandwidth.

  • value (Union[int, float, None]) – The value of the bandwidth. AWS Ground Station currently has the following bandwidth limitations:. - For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz. - For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz. - For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-frequencybandwidth.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

frequency_bandwidth_property = groundstation.CfnConfig.FrequencyBandwidthProperty(
    units="units",
    value=123
)

Attributes

units

The units of the bandwidth.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-frequencybandwidth.html#cfn-groundstation-config-frequencybandwidth-units

value

.

  • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.

  • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.

  • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-frequencybandwidth.html#cfn-groundstation-config-frequencybandwidth-value

Type:

The value of the bandwidth. AWS Ground Station currently has the following bandwidth limitations

FrequencyProperty

class CfnConfig.FrequencyProperty(*, units=None, value=None)

Bases: object

Defines a frequency.

Parameters:
  • units (Optional[str]) – The units of the frequency.

  • value (Union[int, float, None]) – The value of the frequency. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-frequency.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

frequency_property = groundstation.CfnConfig.FrequencyProperty(
    units="units",
    value=123
)

Attributes

units

The units of the frequency.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-frequency.html#cfn-groundstation-config-frequency-units

value

The value of the frequency.

Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-frequency.html#cfn-groundstation-config-frequency-value

S3RecordingConfigProperty

class CfnConfig.S3RecordingConfigProperty(*, bucket_arn=None, prefix=None, role_arn=None)

Bases: object

Provides information about how AWS Ground Station should save downlink data to S3.

Parameters:
  • bucket_arn (Optional[str]) – S3 Bucket where the data is written. The name of the S3 Bucket provided must begin with aws-groundstation .

  • prefix (Optional[str]) – The prefix of the S3 data object. If you choose to use any optional keys for substitution, these values will be replaced with the corresponding information from your contact details. For example, a prefix of {satellite_id}/{year}/{month}/{day}/ will replaced with fake_satellite_id/2021/01/10/ Optional keys for substitution : {satellite_id} | {config-name} | {config-id} | {year} | {month} | {day}

  • role_arn (Optional[str]) – Defines the ARN of the role assumed for putting archives to S3.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-s3recordingconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

s3_recording_config_property = groundstation.CfnConfig.S3RecordingConfigProperty(
    bucket_arn="bucketArn",
    prefix="prefix",
    role_arn="roleArn"
)

Attributes

bucket_arn

S3 Bucket where the data is written.

The name of the S3 Bucket provided must begin with aws-groundstation .

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-s3recordingconfig.html#cfn-groundstation-config-s3recordingconfig-bucketarn

prefix

The prefix of the S3 data object.

If you choose to use any optional keys for substitution, these values will be replaced with the corresponding information from your contact details. For example, a prefix of {satellite_id}/{year}/{month}/{day}/ will replaced with fake_satellite_id/2021/01/10/

Optional keys for substitution : {satellite_id} | {config-name} | {config-id} | {year} | {month} | {day}

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-s3recordingconfig.html#cfn-groundstation-config-s3recordingconfig-prefix

role_arn

Defines the ARN of the role assumed for putting archives to S3.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-s3recordingconfig.html#cfn-groundstation-config-s3recordingconfig-rolearn

SpectrumConfigProperty

class CfnConfig.SpectrumConfigProperty(*, bandwidth=None, center_frequency=None, polarization=None)

Bases: object

Defines a spectrum.

Parameters:
  • bandwidth (Union[IResolvable, FrequencyBandwidthProperty, Dict[str, Any], None]) – The bandwidth of the spectrum. AWS Ground Station currently has the following bandwidth limitations:. - For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz. - For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz. - For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

  • center_frequency (Union[IResolvable, FrequencyProperty, Dict[str, Any], None]) – The center frequency of the spectrum. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

  • polarization (Optional[str]) – The polarization of the spectrum. Valid values are "RIGHT_HAND" and "LEFT_HAND" . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-spectrumconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

spectrum_config_property = groundstation.CfnConfig.SpectrumConfigProperty(
    bandwidth=groundstation.CfnConfig.FrequencyBandwidthProperty(
        units="units",
        value=123
    ),
    center_frequency=groundstation.CfnConfig.FrequencyProperty(
        units="units",
        value=123
    ),
    polarization="polarization"
)

Attributes

bandwidth

.

  • For AntennaDownlinkDemodDecodeconfig , valid values are between 125 kHz to 650 MHz.

  • For AntennaDownlinkconfig , valid values are between 10 kHz to 54 MHz.

  • For AntennaUplinkConfig , valid values are between 10 kHz to 54 MHz.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-spectrumconfig.html#cfn-groundstation-config-spectrumconfig-bandwidth

Type:

The bandwidth of the spectrum. AWS Ground Station currently has the following bandwidth limitations

center_frequency

The center frequency of the spectrum.

Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-spectrumconfig.html#cfn-groundstation-config-spectrumconfig-centerfrequency

polarization

The polarization of the spectrum.

Valid values are "RIGHT_HAND" and "LEFT_HAND" . Capturing both "RIGHT_HAND" and "LEFT_HAND" polarization requires two separate configs.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-spectrumconfig.html#cfn-groundstation-config-spectrumconfig-polarization

TrackingConfigProperty

class CfnConfig.TrackingConfigProperty(*, autotrack=None)

Bases: object

Provides information about how AWS Ground Station should track the satellite through the sky during a contact.

Parameters:

autotrack (Optional[str]) – Specifies whether or not to use autotrack. REMOVED specifies that program track should only be used during the contact. PREFERRED specifies that autotracking is preferred during the contact but fallback to program track if the signal is lost. REQUIRED specifies that autotracking is required during the contact and not to use program track if the signal is lost.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-trackingconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

tracking_config_property = groundstation.CfnConfig.TrackingConfigProperty(
    autotrack="autotrack"
)

Attributes

autotrack

Specifies whether or not to use autotrack.

REMOVED specifies that program track should only be used during the contact. PREFERRED specifies that autotracking is preferred during the contact but fallback to program track if the signal is lost. REQUIRED specifies that autotracking is required during the contact and not to use program track if the signal is lost.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-trackingconfig.html#cfn-groundstation-config-trackingconfig-autotrack

UplinkEchoConfigProperty

class CfnConfig.UplinkEchoConfigProperty(*, antenna_uplink_config_arn=None, enabled=None)

Bases: object

Provides information about how AWS Ground Station should echo back uplink transmissions to a dataflow endpoint.

Parameters:
  • antenna_uplink_config_arn (Optional[str]) – Defines the ARN of the uplink config to echo back to a dataflow endpoint.

  • enabled (Union[bool, IResolvable, None]) – Whether or not uplink echo is enabled.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-uplinkechoconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

uplink_echo_config_property = groundstation.CfnConfig.UplinkEchoConfigProperty(
    antenna_uplink_config_arn="antennaUplinkConfigArn",
    enabled=False
)

Attributes

Defines the ARN of the uplink config to echo back to a dataflow endpoint.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-uplinkechoconfig.html#cfn-groundstation-config-uplinkechoconfig-antennauplinkconfigarn

enabled

Whether or not uplink echo is enabled.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-uplinkechoconfig.html#cfn-groundstation-config-uplinkechoconfig-enabled

UplinkSpectrumConfigProperty

class CfnConfig.UplinkSpectrumConfigProperty(*, center_frequency=None, polarization=None)

Bases: object

Defines a uplink spectrum.

Parameters:
  • center_frequency (Union[IResolvable, FrequencyProperty, Dict[str, Any], None]) – The center frequency of the spectrum. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

  • polarization (Optional[str]) – The polarization of the spectrum. Valid values are "RIGHT_HAND" and "LEFT_HAND" .

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-uplinkspectrumconfig.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_groundstation as groundstation

uplink_spectrum_config_property = groundstation.CfnConfig.UplinkSpectrumConfigProperty(
    center_frequency=groundstation.CfnConfig.FrequencyProperty(
        units="units",
        value=123
    ),
    polarization="polarization"
)

Attributes

center_frequency

The center frequency of the spectrum.

Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-uplinkspectrumconfig.html#cfn-groundstation-config-uplinkspectrumconfig-centerfrequency

polarization

The polarization of the spectrum.

Valid values are "RIGHT_HAND" and "LEFT_HAND" .

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-groundstation-config-uplinkspectrumconfig.html#cfn-groundstation-config-uplinkspectrumconfig-polarization