ApplicationLoadBalancer

class aws_cdk.aws_elasticloadbalancingv2.ApplicationLoadBalancer(scope, id, *, client_keep_alive=None, desync_mitigation_mode=None, drop_invalid_header_fields=None, http2_enabled=None, idle_timeout=None, ip_address_type=None, preserve_host_header=None, preserve_xff_client_port=None, security_group=None, waf_fail_open=None, x_amzn_tls_version_and_cipher_suite_headers=None, xff_header_processing_mode=None, vpc, cross_zone_enabled=None, deletion_protection=None, deny_all_igw_traffic=None, internet_facing=None, load_balancer_name=None, vpc_subnets=None)

Bases: BaseLoadBalancer

Define an Application Load Balancer.

Resource:: AWS::ElasticLoadBalancingV2::LoadBalancer
ExampleMetadata:: infused

Example:

from aws_cdk.aws_autoscaling import AutoScalingGroup
# asg: AutoScalingGroup
# vpc: ec2.Vpc


# Create the load balancer in a VPC. 'internetFacing' is 'false'
# by default, which creates an internal load balancer.
lb = elbv2.ApplicationLoadBalancer(self, "LB",
    vpc=vpc,
    internet_facing=True
)

# Add a listener and open up the load balancer's security group
# to the world.
listener = lb.add_listener("Listener",
    port=80,

    # 'open: true' is the default, you can leave it out if you want. Set it
    # to 'false' and use `listener.connections` if you want to be selective
    # about who can access the load balancer.
    open=True
)

# Create an AutoScaling group and add it as a load balancing
# target to the listener.
listener.add_targets("ApplicationFleet",
    port=8080,
    targets=[asg]
)

Parameters:

scope (Construct) –
id (str) –
client_keep_alive (Optional[Duration]) – The client keep alive duration. The valid range is 60 to 604800 seconds (1 minute to 7 days). Default: - Duration.seconds(3600)
desync_mitigation_mode (Optional[DesyncMitigationMode]) – Determines how the load balancer handles requests that might pose a security risk to your application. Default: DesyncMitigationMode.DEFENSIVE
drop_invalid_header_fields (Optional[bool]) – Indicates whether HTTP headers with invalid header fields are removed by the load balancer (true) or routed to targets (false). Default: false
http2_enabled (Optional[bool]) – Indicates whether HTTP/2 is enabled. Default: true
idle_timeout (Optional[Duration]) – The load balancer idle timeout, in seconds. Default: 60
ip_address_type (Optional[IpAddressType]) – The type of IP addresses to use. Default: IpAddressType.IPV4
preserve_host_header (Optional[bool]) – Indicates whether the Application Load Balancer should preserve the host header in the HTTP request and send it to the target without any change. Default: false
preserve_xff_client_port (Optional[bool]) – Indicates whether the X-Forwarded-For header should preserve the source port that the client used to connect to the load balancer. Default: false
security_group (Optional[ISecurityGroup]) – Security group to associate with this load balancer. Default: A security group is created
waf_fail_open (Optional[bool]) – Indicates whether to allow a WAF-enabled load balancer to route requests to targets if it is unable to forward the request to AWS WAF. Default: false
x_amzn_tls_version_and_cipher_suite_headers (Optional[bool]) – Indicates whether the two headers (x-amzn-tls-version and x-amzn-tls-cipher-suite), which contain information about the negotiated TLS version and cipher suite, are added to the client request before sending it to the target. The x-amzn-tls-version header has information about the TLS protocol version negotiated with the client, and the x-amzn-tls-cipher-suite header has information about the cipher suite negotiated with the client. Both headers are in OpenSSL format. Default: false
xff_header_processing_mode (Optional[XffHeaderProcessingMode]) – Enables you to modify, preserve, or remove the X-Forwarded-For header in the HTTP request before the Application Load Balancer sends the request to the target. Default: XffHeaderProcessingMode.APPEND
vpc (IVpc) – The VPC network to place the load balancer in.
cross_zone_enabled (Optional[bool]) – Indicates whether cross-zone load balancing is enabled. Default: - false for Network Load Balancers and true for Application Load Balancers. This can not be false for Application Load Balancers.
deletion_protection (Optional[bool]) – Indicates whether deletion protection is enabled. Default: false
deny_all_igw_traffic (Optional[bool]) – Indicates whether the load balancer blocks traffic through the Internet Gateway (IGW). Default: - false for internet-facing load balancers and true for internal load balancers
internet_facing (Optional[bool]) – Whether the load balancer has an internet-routable address. Default: false
load_balancer_name (Optional[str]) – Name of the load balancer. Default: - Automatically generated name.
vpc_subnets (Union[SubnetSelection, Dict[str, Any], None]) – Which subnets place the load balancer in. Default: - the Vpc default strategy.

Methods

add_listener(id, *, certificates=None, default_action=None, default_target_groups=None, open=None, port=None, protocol=None, ssl_policy=None)

Add a new listener to this load balancer.

Parameters:

id (str) –
certificates (Optional[Sequence[IListenerCertificate]]) – Certificate list of ACM cert ARNs. You must provide exactly one certificate if the listener protocol is HTTPS or TLS. Default: - No certificates.
default_action (Optional[ListenerAction]) – Default action to take for requests to this listener. This allows full control of the default action of the load balancer, including Action chaining, fixed responses and redirect responses. See the ListenerAction class for all options. Cannot be specified together with defaultTargetGroups. Default: - None.
default_target_groups (Optional[Sequence[IApplicationTargetGroup]]) – Default target groups to load balance to. All target groups will be load balanced to with equal weight and without stickiness. For a more complex configuration than that, use either defaultAction or addAction(). Cannot be specified together with defaultAction. Default: - None.
open (Optional[bool]) – Allow anyone to connect to the load balancer on the listener port. If this is specified, the load balancer will be opened up to anyone who can reach it. For internal load balancers this is anyone in the same VPC. For public load balancers, this is anyone on the internet. If you want to be more selective about who can access this load balancer, set this to false and use the listener’s connections object to selectively grant access to the load balancer on the listener port. Default: true
port (Union[int, float, None]) – The port on which the listener listens for requests. Default: - Determined from protocol if known.
protocol (Optional[ApplicationProtocol]) – The protocol to use. Default: - Determined from port if known.
ssl_policy (Optional[SslPolicy]) – The security policy that defines which ciphers and protocols are supported. Default: - The current predefined security policy.

Return type:

ApplicationListener

add_redirect(*, open=None, source_port=None, source_protocol=None, target_port=None, target_protocol=None)

Add a redirection listener to this load balancer.

Parameters:

open (Optional[bool]) – Allow anyone to connect to this listener. If this is specified, the listener will be opened up to anyone who can reach it. For internal load balancers this is anyone in the same VPC. For public load balancers, this is anyone on the internet. If you want to be more selective about who can access this load balancer, set this to false and use the listener’s connections object to selectively grant access to the listener. Default: true
source_port (Union[int, float, None]) – The port number to listen to. Default: 80
source_protocol (Optional[ApplicationProtocol]) – The protocol of the listener being created. Default: HTTP
target_port (Union[int, float, None]) – The port number to redirect to. Default: 443
target_protocol (Optional[ApplicationProtocol]) – The protocol of the redirection target. Default: HTTPS

Return type:

ApplicationListener

add_security_group(security_group)

Add a security group to this load balancer.

Parameters:

security_group (ISecurityGroup) –

Return type:

None

apply_removal_policy(policy)

Apply the given removal policy to this resource.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (RemovalPolicy) –

Return type:

None

log_access_logs(bucket, prefix=None)

Enable access logging for this load balancer.

A region must be specified on the stack containing the load balancer; you cannot enable logging on environment-agnostic stacks. See https://docs.aws.amazon.com/cdk/latest/guide/environments.html

Parameters:

bucket (IBucket) –
prefix (Optional[str]) –

Return type:

None

metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) Return the given named metric for this Application Load Balancer.

Parameters:

metric_name (str) –
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Average over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.custom instead

Stability:

deprecated

Return type:

Metric

metric_active_connection_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The total number of concurrent TCP connections active from clients to the load balancer and from the load balancer to targets.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.activeConnectionCount instead

Stability:

deprecated

Return type:

Metric

metric_client_tls_negotiation_error_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of TLS connections initiated by the client that did not establish a session with the load balancer.

Possible causes include a mismatch of ciphers or protocols.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.clientTlsNegotiationErrorCount instead

Stability:

deprecated

Return type:

Metric

metric_consumed_lc_us(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of load balancer capacity units (LCU) used by your load balancer.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.consumedLCUs instead

Stability:

deprecated

Return type:

Metric

metric_elb_auth_error(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of user authentications that could not be completed.

Because an authenticate action was misconfigured, the load balancer couldn’t establish a connection with the IdP, or the load balancer couldn’t complete the authentication flow due to an internal error.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.elbAuthError instead

Stability:

deprecated

Return type:

Metric

metric_elb_auth_failure(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of user authentications that could not be completed because the IdP denied access to the user or an authorization code was used more than once.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.elbAuthFailure instead

Stability:

deprecated

Return type:

Metric

metric_elb_auth_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The time elapsed, in milliseconds, to query the IdP for the ID token and user info.

If one or more of these operations fail, this is the time to failure.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Average over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.elbAuthLatency instead

Stability:

deprecated

Return type:

Metric

metric_elb_auth_success(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of authenticate actions that were successful.

This metric is incremented at the end of the authentication workflow, after the load balancer has retrieved the user claims from the IdP.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.elbAuthSuccess instead

Stability:

deprecated

Return type:

Metric

metric_http_code_elb(code, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of HTTP 3xx/4xx/5xx codes that originate from the load balancer.

This does not include any response codes generated by the targets.

Parameters:

code (HttpCodeElb) –
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.httpCodeElb instead

Stability:

deprecated

Return type:

Metric

metric_http_code_target(code, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of HTTP 2xx/3xx/4xx/5xx response codes generated by all targets in the load balancer.

This does not include any response codes generated by the load balancer.

Parameters:

code (HttpCodeTarget) –
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.httpCodeTarget instead

Stability:

deprecated

Return type:

Metric

metric_http_fixed_response_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of fixed-response actions that were successful.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.httpFixedResponseCount instead

Stability:

deprecated

Return type:

Metric

metric_http_redirect_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of redirect actions that were successful.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.httpRedirectCount instead

Stability:

deprecated

Return type:

Metric

metric_http_redirect_url_limit_exceeded_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of redirect actions that couldn’t be completed because the URL in the response location header is larger than 8K.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.httpRedirectUrlLimitExceededCount instead

Stability:

deprecated

Return type:

Metric

metric_ipv6_processed_bytes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The total number of bytes processed by the load balancer over IPv6.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.ipv6ProcessedBytes instead

Stability:

deprecated

Return type:

Metric

metric_ipv6_request_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of IPv6 requests received by the load balancer.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.ipv6RequestCount instead

Stability:

deprecated

Return type:

Metric

metric_new_connection_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The total number of new TCP connections established from clients to the load balancer and from the load balancer to targets.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.newConnectionCount instead

Stability:

deprecated

Return type:

Metric

metric_processed_bytes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The total number of bytes processed by the load balancer over IPv4 and IPv6.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.processedBytes instead

Stability:

deprecated

Return type:

Metric

metric_rejected_connection_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of connections that were rejected because the load balancer had reached its maximum number of connections.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.rejectedConnectionCount instead

Stability:

deprecated

Return type:

Metric

metric_request_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of requests processed over IPv4 and IPv6.

This count includes only the requests with a response generated by a target of the load balancer.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.requestCount instead

Stability:

deprecated

Return type:

Metric

metric_rule_evaluations(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of rules processed by the load balancer given a request rate averaged over an hour.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.ruleEvaluations instead

Stability:

deprecated

Return type:

Metric

metric_target_connection_error_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of connections that were not successfully established between the load balancer and target.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.targetConnectionErrorCount instead

Stability:

deprecated

Return type:

Metric

metric_target_response_time(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The time elapsed, in seconds, after the request leaves the load balancer until a response from the target is received.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Average over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.targetResponseTime instead

Stability:

deprecated

Return type:

Metric

metric_target_tls_negotiation_error_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) The number of TLS connections initiated by the load balancer that did not establish a session with the target.

Possible causes include a mismatch of ciphers or protocols.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

Sum over 5 minutes

Deprecated:

Use ApplicationLoadBalancer.metrics.targetTLSNegotiationErrorCount instead

Stability:

deprecated

Return type:

Metric

remove_attribute(key)

Remove an attribute from the load balancer.

Parameters:

key (str) –

Return type:

None

set_attribute(key, value=None)

Set a non-standard attribute on the load balancer.

Parameters:

key (str) –
value (Optional[str]) –

See:

https://docs.aws.amazon.com/elasticloadbalancing/latest/application/application-load-balancers.html#load-balancer-attributes

Return type:

None

to_string()

Returns a string representation of this construct.

Return type:: str

Attributes

connections: The network connections associated with this resource.

env

The environment this resource belongs to.

For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.

ip_address_type: The IP Address Type for this load balancer.

listeners

A list of listeners that have been added to the load balancer.

This list is only valid for owned constructs.

load_balancer_arn

The ARN of this load balancer.

Example value: arn:aws:elasticloadbalancing:us-west-2:123456789012:loadbalancer/app/my-internal-load-balancer/50dc6c495c0c9188

Attribute:: true

load_balancer_canonical_hosted_zone_id

The canonical hosted zone ID of this load balancer.

Example value: Z2P70J7EXAMPLE

Attribute:: true

load_balancer_dns_name

The DNS name of this load balancer.

Example value: my-load-balancer-424835706.us-west-2.elb.amazonaws.com

Attribute:: true

load_balancer_full_name

The full name of this load balancer.

Example value: app/my-load-balancer/50dc6c495c0c9188

Attribute:: true

load_balancer_name

The name of this load balancer.

Example value: my-load-balancer

Attribute:: true

load_balancer_security_groups

true

Type:: attribute

metrics: All metrics available for this load balancer.

node: The tree node.

stack: The stack in which this resource is defined.

vpc

The VPC this load balancer has been created in.

This property is always defined (not null or undefined) for sub-classes of BaseLoadBalancer.

Static Methods

classmethod from_application_load_balancer_attributes(scope, id, *, load_balancer_arn, security_group_id, load_balancer_canonical_hosted_zone_id=None, load_balancer_dns_name=None, security_group_allows_all_outbound=None, vpc=None)

Import an existing Application Load Balancer.

Parameters:

scope (Construct) –
id (str) –
load_balancer_arn (str) – ARN of the load balancer.
security_group_id (str) – ID of the load balancer’s security group.
load_balancer_canonical_hosted_zone_id (Optional[str]) – The canonical hosted zone ID of this load balancer. Default: - When not provided, LB cannot be used as Route53 Alias target.
load_balancer_dns_name (Optional[str]) – The DNS name of this load balancer. Default: - When not provided, LB cannot be used as Route53 Alias target.
security_group_allows_all_outbound (Optional[bool]) – Whether the security group allows all outbound traffic or not. Unless set to false, no egress rules will be added to the security group. Default: true
vpc (Optional[IVpc]) – The VPC this load balancer has been created in, if available. Default: - If the Load Balancer was imported and a VPC was not specified, the VPC is not available.

Return type:

IApplicationLoadBalancer

classmethod from_lookup(scope, id, *, load_balancer_arn=None, load_balancer_tags=None)

Look up an application load balancer.

Parameters:

scope (Construct) –
id (str) –
load_balancer_arn (Optional[str]) – Find by load balancer’s ARN. Default: - does not search by load balancer arn
load_balancer_tags (Optional[Mapping[str, str]]) – Match load balancer tags. Default: - does not match load balancers by tags

Return type:

IApplicationLoadBalancer

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:: x (Any) – Any object.
Return type:: bool
Returns:: true if x is an object created from a class which extends Construct.

classmethod is_owned_resource(construct)

Returns true if the construct was created by CDK, and false otherwise.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_resource(construct)

Check whether the given construct is a Resource.

Parameters:

construct (IConstruct) –

Return type:

bool