INetworkLoadBalancerMetrics
- class aws_cdk.aws_elasticloadbalancingv2.INetworkLoadBalancerMetrics(*args, **kwargs)
Bases:
Protocol
Contains all metrics for a Network Load Balancer.
Methods
- active_flow_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The total number of concurrent TCP flows (or connections) from clients to targets.
This metric includes connections in the SYN_SENT and ESTABLISHED states. TCP connections are not terminated at the load balancer, so a client opening a TCP connection to a target counts as a single flow.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No labelperiod (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Average over 5 minutes
- Return type:
- consumed_lc_us(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The number of load balancer capacity units (LCU) used by your load balancer.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Sum over 5 minutes
- Return type:
- custom(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Return the given named metric for this Network Load Balancer.
- Parameters:
metric_name (
str
) –account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Average over 5 minutes
- Return type:
- new_flow_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The total number of new TCP flows (or connections) established from clients to targets in the time period.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Sum over 5 minutes
- Return type:
- processed_bytes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The total number of bytes processed by the load balancer, including TCP/IP headers.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Sum over 5 minutes
- Return type:
- tcp_client_reset_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The total number of reset (RST) packets sent from a client to a target.
These resets are generated by the client and forwarded by the load balancer.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Sum over 5 minutes
- Return type:
- tcp_elb_reset_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The total number of reset (RST) packets generated by the load balancer.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Sum over 5 minutes
- Return type:
- tcp_target_reset_count(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
The total number of reset (RST) packets sent from a target to a client.
These resets are generated by the target and forwarded by the load balancer.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
Sum over 5 minutes
- Return type: