CfnLoadBalancerProps
- class aws_cdk.aws_elasticloadbalancingv2.CfnLoadBalancerProps(*, enable_prefix_for_ipv6_source_nat=None, enforce_security_group_inbound_rules_on_private_link_traffic=None, ip_address_type=None, load_balancer_attributes=None, name=None, scheme=None, security_groups=None, subnet_mappings=None, subnets=None, tags=None, type=None)
Bases:
object
Properties for defining a
CfnLoadBalancer
.- Parameters:
enable_prefix_for_ipv6_source_nat (
Optional
[str
]) – [Network Load Balancers with UDP listeners] Indicates whether to use an IPv6 prefix from each subnet for source NAT. The IP address type must bedualstack
. The default value isoff
.enforce_security_group_inbound_rules_on_private_link_traffic (
Optional
[str
]) – Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through AWS PrivateLink .ip_address_type (
Optional
[str
]) – The IP address type. Internal load balancers must useipv4
. [Application Load Balancers] The possible values areipv4
(IPv4 addresses),dualstack
(IPv4 and IPv6 addresses), anddualstack-without-public-ipv4
(public IPv6 addresses and private IPv4 and IPv6 addresses). Application Load Balancer authentication supports IPv4 addresses only when connecting to an Identity Provider (IdP) or Amazon Cognito endpoint. Without a public IPv4 address the load balancer can’t complete the authentication process, resulting in HTTP 500 errors. [Network Load Balancers and Gateway Load Balancers] The possible values areipv4
(IPv4 addresses) anddualstack
(IPv4 and IPv6 addresses).load_balancer_attributes (
Union
[IResolvable
,Sequence
[Union
[IResolvable
,LoadBalancerAttributeProperty
,Dict
[str
,Any
]]],None
]) – The load balancer attributes.name (
Optional
[str
]) – The name of the load balancer. This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with “internal-”. If you don’t specify a name, AWS CloudFormation generates a unique physical ID for the load balancer. If you specify a name, you cannot perform updates that require replacement of this resource, but you can perform other updates. To replace the resource, specify a new name.scheme (
Optional
[str
]) – The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet. The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer. The default is an Internet-facing load balancer. You can’t specify a scheme for a Gateway Load Balancer.security_groups (
Optional
[Sequence
[str
]]) – [Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.subnet_mappings (
Union
[IResolvable
,Sequence
[Union
[IResolvable
,SubnetMappingProperty
,Dict
[str
,Any
]]],None
]) – The IDs of the subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. [Application Load Balancers] You must specify subnets from at least two Availability Zones. You can’t specify Elastic IP addresses for your subnets. [Application Load Balancers on Outposts] You must specify one Outpost subnet. [Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones. [Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet. [Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You can’t specify Elastic IP addresses for your subnets.subnets (
Optional
[Sequence
[str
]]) – The IDs of the subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. To specify an Elastic IP address, specify subnet mappings instead of subnets. [Application Load Balancers] You must specify subnets from at least two Availability Zones. [Application Load Balancers on Outposts] You must specify one Outpost subnet. [Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones. [Network Load Balancers and Gateway Load Balancers] You can specify subnets from one or more Availability Zones.tags (
Optional
[Sequence
[Union
[CfnTag
,Dict
[str
,Any
]]]]) – The tags to assign to the load balancer.type (
Optional
[str
]) – The type of load balancer. The default isapplication
.
- See:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. from aws_cdk import aws_elasticloadbalancingv2 as elbv2 cfn_load_balancer_props = elbv2.CfnLoadBalancerProps( enable_prefix_for_ipv6_source_nat="enablePrefixForIpv6SourceNat", enforce_security_group_inbound_rules_on_private_link_traffic="enforceSecurityGroupInboundRulesOnPrivateLinkTraffic", ip_address_type="ipAddressType", load_balancer_attributes=[elbv2.CfnLoadBalancer.LoadBalancerAttributeProperty( key="key", value="value" )], name="name", scheme="scheme", security_groups=["securityGroups"], subnet_mappings=[elbv2.CfnLoadBalancer.SubnetMappingProperty( subnet_id="subnetId", # the properties below are optional allocation_id="allocationId", i_pv6_address="iPv6Address", private_iPv4_address="privateIPv4Address", source_nat_ipv6_prefix="sourceNatIpv6Prefix" )], subnets=["subnets"], tags=[CfnTag( key="key", value="value" )], type="type" )
Attributes
- enable_prefix_for_ipv6_source_nat
[Network Load Balancers with UDP listeners] Indicates whether to use an IPv6 prefix from each subnet for source NAT.
The IP address type must be
dualstack
. The default value isoff
.
- enforce_security_group_inbound_rules_on_private_link_traffic
Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through AWS PrivateLink .
- ip_address_type
The IP address type. Internal load balancers must use
ipv4
.[Application Load Balancers] The possible values are
ipv4
(IPv4 addresses),dualstack
(IPv4 and IPv6 addresses), anddualstack-without-public-ipv4
(public IPv6 addresses and private IPv4 and IPv6 addresses).Application Load Balancer authentication supports IPv4 addresses only when connecting to an Identity Provider (IdP) or Amazon Cognito endpoint. Without a public IPv4 address the load balancer can’t complete the authentication process, resulting in HTTP 500 errors.
[Network Load Balancers and Gateway Load Balancers] The possible values are
ipv4
(IPv4 addresses) anddualstack
(IPv4 and IPv6 addresses).
- load_balancer_attributes
The load balancer attributes.
- name
The name of the load balancer.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must not begin with “internal-“.
If you don’t specify a name, AWS CloudFormation generates a unique physical ID for the load balancer. If you specify a name, you cannot perform updates that require replacement of this resource, but you can perform other updates. To replace the resource, specify a new name.
- scheme
The nodes of an Internet-facing load balancer have public IP addresses.
The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet.
The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.
The default is an Internet-facing load balancer.
You can’t specify a scheme for a Gateway Load Balancer.
- security_groups
[Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.
- subnet_mappings
The IDs of the subnets.
You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both.
[Application Load Balancers] You must specify subnets from at least two Availability Zones. You can’t specify Elastic IP addresses for your subnets.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.
[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You can’t specify Elastic IP addresses for your subnets.
- subnets
The IDs of the subnets.
You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings, but not both. To specify an Elastic IP address, specify subnet mappings instead of subnets.
[Application Load Balancers] You must specify subnets from at least two Availability Zones.
[Application Load Balancers on Outposts] You must specify one Outpost subnet.
[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.
[Network Load Balancers and Gateway Load Balancers] You can specify subnets from one or more Availability Zones.
- tags
The tags to assign to the load balancer.
- type
The type of load balancer.
The default is
application
.