CfnHostedZone

class aws_cdk.aws_route53.CfnHostedZone(scope, id, *, hosted_zone_config=None, hosted_zone_tags=None, name=None, query_logging_config=None, vpcs=None)

Bases: CfnResource

A CloudFormation AWS::Route53::HostedZone.

Creates a new public or private hosted zone. You create records in a public hosted zone to define how you want to route traffic on the internet for a domain, such as example.com, and its subdomains (apex.example.com, acme.example.com). You create records in a private hosted zone to define how you want to route traffic for a domain and its subdomains within one or more Amazon Virtual Private Clouds (Amazon VPCs). .. epigraph:

You can't convert a public hosted zone to a private hosted zone or vice versa. Instead, you must create a new hosted zone with the same name and create new resource record sets.

For more information about charges for hosted zones, see Amazon Route 53 Pricing .

Note the following:

  • You can’t create a hosted zone for a top-level domain (TLD) such as .com.

  • For public hosted zones, Route 53 automatically creates a default SOA record and four NS records for the zone. For more information about SOA and NS records, see NS and SOA Records that Route 53 Creates for a Hosted Zone in the Amazon Route 53 Developer Guide .

If you want to use the same name servers for multiple public hosted zones, you can optionally associate a reusable delegation set with the hosted zone. See the DelegationSetId element.

When you submit a CreateHostedZone request, the initial status of the hosted zone is PENDING . For public hosted zones, this means that the NS and SOA records are not yet available on all Route 53 DNS servers. When the NS and SOA records are available, the status of the zone changes to INSYNC .

The CreateHostedZone request requires the caller to have an ec2:DescribeVpcs permission. .. epigraph:

When creating private hosted zones, the Amazon VPC must belong to the same partition where the hosted zone is created. A partition is a group of AWS Regions . Each AWS account is scoped to one partition.

The following are the supported partitions:

- ``aws`` - AWS Regions
- ``aws-cn`` - China Regions
- ``aws-us-gov`` - AWS GovCloud (US) Region

For more information, see `Access Management <https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html>`_ in the *AWS General Reference* .
CloudformationResource

AWS::Route53::HostedZone

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_route53 as route53

cfn_hosted_zone = route53.CfnHostedZone(self, "MyCfnHostedZone",
    hosted_zone_config=route53.CfnHostedZone.HostedZoneConfigProperty(
        comment="comment"
    ),
    hosted_zone_tags=[route53.CfnHostedZone.HostedZoneTagProperty(
        key="key",
        value="value"
    )],
    name="name",
    query_logging_config=route53.CfnHostedZone.QueryLoggingConfigProperty(
        cloud_watch_logs_log_group_arn="cloudWatchLogsLogGroupArn"
    ),
    vpcs=[route53.CfnHostedZone.VPCProperty(
        vpc_id="vpcId",
        vpc_region="vpcRegion"
    )]
)

Create a new AWS::Route53::HostedZone.

Parameters
  • scope (Construct) –

    • scope in which this resource is defined.

  • id (str) –

    • scoped id of the resource.

  • hosted_zone_config (Union[HostedZoneConfigProperty, Dict[str, Any], IResolvable, None]) – A complex type that contains an optional comment. If you don’t want to specify a comment, omit the HostedZoneConfig and Comment elements.

  • hosted_zone_tags (Optional[Sequence[Union[HostedZoneTagProperty, Dict[str, Any]]]]) – Adds, edits, or deletes tags for a health check or a hosted zone. For information about using tags for cost allocation, see Using Cost Allocation Tags in the AWS Billing and Cost Management User Guide .

  • name (Optional[str]) – The name of the domain. Specify a fully qualified domain name, for example, www.example.com . The trailing dot is optional; Amazon Route 53 assumes that the domain name is fully qualified. This means that Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical. If you’re creating a public hosted zone, this is the name you have registered with your DNS registrar. If your domain name is registered with a registrar other than Route 53, change the name servers for your domain to the set of NameServers that are returned by the Fn::GetAtt intrinsic function.

  • query_logging_config (Union[QueryLoggingConfigProperty, Dict[str, Any], IResolvable, None]) – Creates a configuration for DNS query logging. After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group. DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone, such as the following: - Route 53 edge location that responded to the DNS query - Domain or subdomain that was requested - DNS record type, such as A or AAAA - DNS response code, such as NoError or ServFail - Log Group and Resource Policy - Before you create a query logging configuration, perform the following operations. .. epigraph:: If you create a query logging configuration using the Route 53 console, Route 53 performs these operations automatically. - Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following: - You must create the log group in the us-east-1 region. - You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for. - When you create log groups for query logging, we recommend that you use a consistent prefix, for example: /aws/route53/ *hosted zone name* In the next step, you’ll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Route 53 hosted zones. There’s a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging. - Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams and to send query logs to log streams. For the value of Resource , specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with * , for example: arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/* To avoid the confused deputy problem, a security issue where an entity without a permission for an action can coerce a more-privileged entity to perform it, you can optionally limit the permissions that a service has to a resource in a resource-based policy by supplying the following values: - For aws:SourceArn , supply the hosted zone ARN used in creating the query logging configuration. For example, aws:SourceArn: arn:aws:route53:::hostedzone/hosted zone ID . - For aws:SourceAccount , supply the account ID for the account that creates the query logging configuration. For example, aws:SourceAccount:111111111111 . For more information, see The confused deputy problem in the AWS IAM User Guide . .. epigraph:: You can’t use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of the AWS SDKs, or the AWS CLI . - Log Streams and Edge Locations - When Route 53 finishes creating the configuration for DNS query logging, it does the following: - Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge location. - Begins to send query logs to the applicable log stream. The name of each log stream is in the following format: *hosted zone ID* / *edge location code* The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations, see “The Route 53 Global Network” on the Route 53 Product Details page. - Queries That Are Logged - Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue to return the cached response. It doesn’t forward another query to Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see Routing Internet Traffic to Your Website or Web Application in the Amazon Route 53 Developer Guide . - Log File Format - For a list of the values in each query log and the format of each value, see Logging DNS Queries in the Amazon Route 53 Developer Guide . - Pricing - For information about charges for query logs, see Amazon CloudWatch Pricing . - How to Stop Logging - If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see DeleteQueryLoggingConfig .

  • vpcs (Union[IResolvable, Sequence[Union[VPCProperty, Dict[str, Any], IResolvable]], None]) – Private hosted zones: A complex type that contains information about the VPCs that are associated with the specified hosted zone. .. epigraph:: For public hosted zones, omit VPCs , VPCId , and VPCRegion .

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters

path (str) – The path of the value to delete.

Return type

None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters

target (CfnResource) –

Return type

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters
  • key (str) –

  • value (Any) –

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

Return type

None

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

# Example automatically generated from non-compiling source. May contain errors.
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters
  • path (str) –

    • The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.

  • value (Any) –

    • The value. Could be primitive or complex.

Return type

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters

property_path (str) – The path to the property.

Return type

None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters
  • property_path (str) – The path of the property.

  • value (Any) – The value.

Return type

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:

Parameters
  • policy (Optional[RemovalPolicy]) –

  • apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true

  • default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options

Return type

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters

attribute_name (str) – The name of the attribute.

Return type

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters

key (str) –

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

Return type

Any

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters

inspector (TreeInspector) –

  • tree inspector to collect and process attributes.

Return type

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters

new_logical_id (str) – The new logical ID to use for this stack element.

Return type

None

to_string()

Returns a string representation of this construct.

Return type

str

Returns

a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::Route53::HostedZone'
attr_id

The ID that Amazon Route 53 assigned to the hosted zone when you created it.

CloudformationAttribute

Id

Return type

str

attr_name_servers

ns1.example.com .

This attribute is not supported for private hosted zones.

CloudformationAttribute

NameServers

Type

Returns the set of name servers for the specific hosted zone. For example

Return type

List[str]

cfn_options

Options for this resource, such as condition, update policy etc.

Return type

ICfnResourceOptions

cfn_resource_type

AWS resource type.

Return type

str

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

Return type

List[str]

hosted_zone_config

A complex type that contains an optional comment.

If you don’t want to specify a comment, omit the HostedZoneConfig and Comment elements.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-hostedzoneconfig

Return type

Union[HostedZoneConfigProperty, IResolvable, None]

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Return type

str

Returns

the logical ID as a stringified token. This value will only get resolved during synthesis.

name

The name of the domain.

Specify a fully qualified domain name, for example, www.example.com . The trailing dot is optional; Amazon Route 53 assumes that the domain name is fully qualified. This means that Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.

If you’re creating a public hosted zone, this is the name you have registered with your DNS registrar. If your domain name is registered with a registrar other than Route 53, change the name servers for your domain to the set of NameServers that are returned by the Fn::GetAtt intrinsic function.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-name

Return type

Optional[str]

node

The tree node.

Return type

Node

query_logging_config

Creates a configuration for DNS query logging.

After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group.

DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone, such as the following:

  • Route 53 edge location that responded to the DNS query

  • Domain or subdomain that was requested

  • DNS record type, such as A or AAAA

  • DNS response code, such as NoError or ServFail

  • Log Group and Resource Policy - Before you create a query logging configuration, perform the following operations.

If you create a query logging configuration using the Route 53 console, Route 53 performs these operations automatically.

  • Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following:

  • You must create the log group in the us-east-1 region.

  • You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for.

  • When you create log groups for query logging, we recommend that you use a consistent prefix, for example:

/aws/route53/ *hosted zone name*

In the next step, you’ll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Route 53 hosted zones. There’s a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging.

  • Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams and to send query logs to log streams. For the value of Resource , specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with * , for example:

arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/*

To avoid the confused deputy problem, a security issue where an entity without a permission for an action can coerce a more-privileged entity to perform it, you can optionally limit the permissions that a service has to a resource in a resource-based policy by supplying the following values:

  • For aws:SourceArn , supply the hosted zone ARN used in creating the query logging configuration. For example, aws:SourceArn: arn:aws:route53:::hostedzone/hosted zone ID .

  • For aws:SourceAccount , supply the account ID for the account that creates the query logging configuration. For example, aws:SourceAccount:111111111111 .

For more information, see The confused deputy problem in the AWS IAM User Guide . .. epigraph:

You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of the AWS SDKs, or the AWS CLI .
  • Log Streams and Edge Locations - When Route 53 finishes creating the configuration for DNS query logging, it does the following:

  • Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge location.

  • Begins to send query logs to the applicable log stream.

The name of each log stream is in the following format:

*hosted zone ID* / *edge location code*

The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations, see “The Route 53 Global Network” on the Route 53 Product Details page.

  • Queries That Are Logged - Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue to return the cached response. It doesn’t forward another query to Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see Routing Internet Traffic to Your Website or Web Application in the Amazon Route 53 Developer Guide .

  • Log File Format - For a list of the values in each query log and the format of each value, see Logging DNS Queries in the Amazon Route 53 Developer Guide .

  • Pricing - For information about charges for query logs, see Amazon CloudWatch Pricing .

  • How to Stop Logging - If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see DeleteQueryLoggingConfig .

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-queryloggingconfig

Return type

Union[QueryLoggingConfigProperty, IResolvable, None]

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

Return type

str

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

Return type

Stack

tags

Adds, edits, or deletes tags for a health check or a hosted zone.

For information about using tags for cost allocation, see Using Cost Allocation Tags in the AWS Billing and Cost Management User Guide .

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-hostedzonetags

Return type

TagManager

vpcs
  • A complex type that contains information about the VPCs that are associated with the specified hosted zone.

For public hosted zones, omit VPCs , VPCId , and VPCRegion .

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53-hostedzone.html#cfn-route53-hostedzone-vpcs

Type

*Private hosted zones

Return type

Union[IResolvable, List[Union[VPCProperty, IResolvable]], None]

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters

x (Any) –

Return type

bool

Returns

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters

construct (IConstruct) –

Return type

bool

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters

x (Any) – Any object.

Return type

bool

Returns

true if x is an object created from a class which extends Construct.

HostedZoneConfigProperty

class CfnHostedZone.HostedZoneConfigProperty(*, comment=None)

Bases: object

A complex type that contains an optional comment about your hosted zone.

If you don’t want to specify a comment, omit both the HostedZoneConfig and Comment elements.

Parameters

comment (Optional[str]) – Any comments that you want to include about the hosted zone.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzoneconfig.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_route53 as route53

hosted_zone_config_property = route53.CfnHostedZone.HostedZoneConfigProperty(
    comment="comment"
)

Attributes

comment

Any comments that you want to include about the hosted zone.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzoneconfig.html#cfn-route53-hostedzone-hostedzoneconfig-comment

Return type

Optional[str]

HostedZoneTagProperty

class CfnHostedZone.HostedZoneTagProperty(*, key, value)

Bases: object

A complex type that contains information about a tag that you want to add or edit for the specified health check or hosted zone.

Parameters
  • key (str) – The value of Key depends on the operation that you want to perform:. - Add a tag to a health check or hosted zone : Key is the name that you want to give the new tag. - Edit a tag : Key is the name of the tag that you want to change the Value for. - Delete a key : Key is the name of the tag you want to remove. - Give a name to a health check : Edit the default Name tag. In the Amazon Route 53 console, the list of your health checks includes a Name column that lets you see the name that you’ve given to each health check.

  • value (str) – The value of Value depends on the operation that you want to perform:. - Add a tag to a health check or hosted zone : Value is the value that you want to give the new tag. - Edit a tag : Value is the new value that you want to assign the tag.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzonetag.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_route53 as route53

hosted_zone_tag_property = route53.CfnHostedZone.HostedZoneTagProperty(
    key="key",
    value="value"
)

Attributes

key

.

  • Add a tag to a health check or hosted zone : Key is the name that you want to give the new tag.

  • Edit a tag : Key is the name of the tag that you want to change the Value for.

  • Delete a key : Key is the name of the tag you want to remove.

  • Give a name to a health check : Edit the default Name tag. In the Amazon Route 53 console, the list of your health checks includes a Name column that lets you see the name that you’ve given to each health check.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzonetag.html#cfn-route53-hostedzone-hostedzonetag-key

Type

The value of Key depends on the operation that you want to perform

Return type

str

value

.

  • Add a tag to a health check or hosted zone : Value is the value that you want to give the new tag.

  • Edit a tag : Value is the new value that you want to assign the tag.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-hostedzonetag.html#cfn-route53-hostedzone-hostedzonetag-value

Type

The value of Value depends on the operation that you want to perform

Return type

str

QueryLoggingConfigProperty

class CfnHostedZone.QueryLoggingConfigProperty(*, cloud_watch_logs_log_group_arn)

Bases: object

A complex type that contains information about a configuration for DNS query logging.

Parameters

cloud_watch_logs_log_group_arn (str) – The Amazon Resource Name (ARN) of the CloudWatch Logs log group that Amazon Route 53 is publishing logs to.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-queryloggingconfig.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_route53 as route53

query_logging_config_property = route53.CfnHostedZone.QueryLoggingConfigProperty(
    cloud_watch_logs_log_group_arn="cloudWatchLogsLogGroupArn"
)

Attributes

cloud_watch_logs_log_group_arn

The Amazon Resource Name (ARN) of the CloudWatch Logs log group that Amazon Route 53 is publishing logs to.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-queryloggingconfig.html#cfn-route53-hostedzone-queryloggingconfig-cloudwatchlogsloggrouparn

Return type

str

VPCProperty

class CfnHostedZone.VPCProperty(*, vpc_id, vpc_region)

Bases: object

Private hosted zones only: A complex type that contains information about an Amazon VPC.

Route 53 Resolver uses the records in the private hosted zone to route traffic in that VPC. .. epigraph:

For public hosted zones, omit ``VPCs`` , ``VPCId`` , and ``VPCRegion`` .
Parameters
  • vpc_id (str) – Private hosted zones only: The ID of an Amazon VPC. .. epigraph:: For public hosted zones, omit VPCs , VPCId , and VPCRegion .

  • vpc_region (str) – Private hosted zones only: The region that an Amazon VPC was created in. .. epigraph:: For public hosted zones, omit VPCs , VPCId , and VPCRegion .

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-vpc.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_route53 as route53

v_pCProperty = route53.CfnHostedZone.VPCProperty(
    vpc_id="vpcId",
    vpc_region="vpcRegion"
)

Attributes

vpc_id
  • The ID of an Amazon VPC.

For public hosted zones, omit VPCs , VPCId , and VPCRegion .

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-vpc.html#cfn-route53-hostedzone-vpc-vpcid

Type

*Private hosted zones only

Return type

str

vpc_region
  • The region that an Amazon VPC was created in.

For public hosted zones, omit VPCs , VPCId , and VPCRegion .

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-hostedzone-vpc.html#cfn-route53-hostedzone-vpc-vpcregion

Type

*Private hosted zones only

Return type

str