AWS Migration Hub Config 2019-06-30
- Client: Aws\MigrationHubConfig\MigrationHubConfigClient
- Service ID: migrationhub-config
- Version: 2019-06-30
This page describes the parameters and results for the operations of the AWS Migration Hub Config (2019-06-30), and shows how to use the Aws\MigrationHubConfig\MigrationHubConfigClient object to call the described operations. This documentation is specific to the 2019-06-30 API version of the service.
Operation Summary
Each of the following operations can be created from a client using
$client->getCommand('CommandName'), where "CommandName" is the
name of one of the following operations. Note: a command is a value that
encapsulates an operation and the parameters used to create an HTTP request.
You can also create and send a command immediately using the magic methods
available on a client object: $client->commandName(/* parameters */).
You can send the command asynchronously (returning a promise) by appending the
word "Async" to the operation name: $client->commandNameAsync(/* parameters */).
- CreateHomeRegionControl ( array $params = [] )
This API sets up the home region for the calling account only.
- DescribeHomeRegionControls ( array $params = [] )
This API permits filtering on the ControlId and HomeRegion fields.
- GetHomeRegion ( array $params = [] )
Returns the calling account’s home region, if configured.
Paginators
Paginators handle automatically iterating over paginated API results. Paginators are associated with specific API operations, and they accept the parameters that the corresponding API operation accepts. You can get a paginator from a client class using getPaginator($paginatorName, $operationParameters). This client supports the following paginators:
Operations
CreateHomeRegionControl
$result = $client->createHomeRegionControl([/* ... */]); $promise = $client->createHomeRegionControlAsync([/* ... */]);
This API sets up the home region for the calling account only.
Parameter Syntax
$result = $client->createHomeRegionControl([
'DryRun' => true || false,
'HomeRegion' => '<string>', // REQUIRED
'Target' => [ // REQUIRED
'Id' => '<string>',
'Type' => 'ACCOUNT', // REQUIRED
],
]);
Parameter Details
Members
- DryRun
-
- Type: boolean
Optional Boolean flag to indicate whether any effect should take place. It tests whether the caller has permission to make the call.
- HomeRegion
-
- Required: Yes
- Type: string
The name of the home region of the calling account.
- Target
-
- Required: Yes
- Type: Target structure
The account for which this command sets up a home region control. The
Targetis always of typeACCOUNT.
Result Syntax
[
'HomeRegionControl' => [
'ControlId' => '<string>',
'HomeRegion' => '<string>',
'RequestedTime' => <DateTime>,
'Target' => [
'Id' => '<string>',
'Type' => 'ACCOUNT',
],
],
]
Result Details
Members
- HomeRegionControl
-
- Type: HomeRegionControl structure
This object is the
HomeRegionControlobject that's returned by a successful call toCreateHomeRegionControl.
Errors
-
Exception raised when an internal, configuration, or dependency error is encountered.
-
Exception raised when a request fails due to temporary unavailability of the service.
-
You do not have sufficient access to perform this action.
-
The request was denied due to request throttling.
-
Exception raised to indicate that authorization of an action was successful, when the
DryRunflag is set to true. -
Exception raised when the provided input violates a policy constraint or is entered in the wrong format or data type.
DescribeHomeRegionControls
$result = $client->describeHomeRegionControls([/* ... */]); $promise = $client->describeHomeRegionControlsAsync([/* ... */]);
This API permits filtering on the ControlId and HomeRegion fields.
Parameter Syntax
$result = $client->describeHomeRegionControls([
'ControlId' => '<string>',
'HomeRegion' => '<string>',
'MaxResults' => <integer>,
'NextToken' => '<string>',
'Target' => [
'Id' => '<string>',
'Type' => 'ACCOUNT', // REQUIRED
],
]);
Parameter Details
Members
- ControlId
-
- Type: string
The
ControlIDis a unique identifier string of yourHomeRegionControlobject. - HomeRegion
-
- Type: string
The name of the home region you'd like to view.
- MaxResults
-
- Type: int
The maximum number of filtering results to display per page.
- NextToken
-
- Type: string
If a
NextTokenwas returned by a previous call, more results are available. To retrieve the next page of results, make the call again using the returned token inNextToken. - Target
-
- Type: Target structure
The target parameter specifies the identifier to which the home region is applied, which is always of type
ACCOUNT. It applies the home region to the currentACCOUNT.
Result Syntax
[
'HomeRegionControls' => [
[
'ControlId' => '<string>',
'HomeRegion' => '<string>',
'RequestedTime' => <DateTime>,
'Target' => [
'Id' => '<string>',
'Type' => 'ACCOUNT',
],
],
// ...
],
'NextToken' => '<string>',
]
Result Details
Members
- HomeRegionControls
-
- Type: Array of HomeRegionControl structures
An array that contains your
HomeRegionControlobjects. - NextToken
-
- Type: string
If a
NextTokenwas returned by a previous call, more results are available. To retrieve the next page of results, make the call again using the returned token inNextToken.
Errors
-
Exception raised when an internal, configuration, or dependency error is encountered.
-
Exception raised when a request fails due to temporary unavailability of the service.
-
You do not have sufficient access to perform this action.
-
The request was denied due to request throttling.
-
Exception raised when the provided input violates a policy constraint or is entered in the wrong format or data type.
GetHomeRegion
$result = $client->getHomeRegion([/* ... */]); $promise = $client->getHomeRegionAsync([/* ... */]);
Returns the calling account’s home region, if configured. This API is used by other AWS services to determine the regional endpoint for calling AWS Application Discovery Service and Migration Hub. You must call GetHomeRegion at least once before you call any other AWS Application Discovery Service and AWS Migration Hub APIs, to obtain the account's Migration Hub home region.
Parameter Syntax
$result = $client->getHomeRegion([ ]);
Parameter Details
Members
Result Syntax
[
'HomeRegion' => '<string>',
]
Result Details
Errors
-
Exception raised when an internal, configuration, or dependency error is encountered.
-
Exception raised when a request fails due to temporary unavailability of the service.
-
You do not have sufficient access to perform this action.
-
The request was denied due to request throttling.
-
Exception raised when the provided input violates a policy constraint or is entered in the wrong format or data type.
Shapes
AccessDeniedException
DryRunOperation
Description
Exception raised to indicate that authorization of an action was successful, when the DryRun flag is set to true.
Members
HomeRegionControl
Description
A home region control is an object that specifies the home region for an account, with some additional information. It contains a target (always of type ACCOUNT), an ID, and a time at which the home region was set.
Members
- ControlId
-
- Type: string
A unique identifier that's generated for each home region control. It's always a string that begins with "hrc-" followed by 12 lowercase letters and numbers.
- HomeRegion
-
- Type: string
The AWS Region that's been set as home region. For example, "us-west-2" or "eu-central-1" are valid home regions.
- RequestedTime
-
- Type: timestamp (string|DateTime or anything parsable by strtotime)
A timestamp representing the time when the customer called
CreateHomeregionControland set the home region for the account. - Target
-
- Type: Target structure
The target parameter specifies the identifier to which the home region is applied, which is always an
ACCOUNT. It applies the home region to the currentACCOUNT.
InternalServerError
Description
Exception raised when an internal, configuration, or dependency error is encountered.
Members
InvalidInputException
Description
Exception raised when the provided input violates a policy constraint or is entered in the wrong format or data type.
Members
ServiceUnavailableException
Description
Exception raised when a request fails due to temporary unavailability of the service.
Members
Target
Description
The target parameter specifies the identifier to which the home region is applied, which is always an ACCOUNT. It applies the home region to the current ACCOUNT.