@ThreadSafe @Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AmazonEC2Client extends AmazonWebServiceClient implements AmazonEC2
Amazon Elastic Compute Cloud (Amazon EC2) provides secure and resizable computing capacity in the AWS Cloud. Using Amazon EC2 eliminates the need to invest in hardware up front, so you can develop and deploy applications faster. Amazon Virtual Private Cloud (Amazon VPC) enables you to provision a logically isolated section of the AWS Cloud where you can launch AWS resources in a virtual network that you've defined. Amazon Elastic Block Store (Amazon EBS) provides block level storage volumes for use with EC2 instances. EBS volumes are highly available and reliable storage volumes that can be attached to any running instance and used like a hard drive.
To learn more, see the following resources:
Amazon EC2: AmazonEC2 product page, Amazon EC2 documentation
Amazon EBS: Amazon EBS product page, Amazon EBS documentation
Amazon VPC: Amazon VPC product page, Amazon VPC documentation
AWS VPN: AWS VPN product page, AWS VPN documentation
LOGGING_AWS_REQUEST_METRIC
ENDPOINT_PREFIX
Constructor and Description |
---|
AmazonEC2Client()
Deprecated.
|
AmazonEC2Client(AWSCredentials awsCredentials)
Deprecated.
use
AwsClientBuilder.withCredentials(AWSCredentialsProvider) for example:
AmazonEC2ClientBuilder.standard().withCredentials(new AWSStaticCredentialsProvider(awsCredentials)).build(); |
AmazonEC2Client(AWSCredentials awsCredentials,
ClientConfiguration clientConfiguration)
|
AmazonEC2Client(AWSCredentialsProvider awsCredentialsProvider)
Deprecated.
|
AmazonEC2Client(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration)
|
AmazonEC2Client(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration,
RequestMetricCollector requestMetricCollector)
|
AmazonEC2Client(ClientConfiguration clientConfiguration)
Deprecated.
|
addRequestHandler, addRequestHandler, configureRegion, getClientConfiguration, getEndpointPrefix, getMonitoringListeners, getRequestMetricsCollector, getServiceName, getSignerByURI, getSignerOverride, getSignerRegionOverride, getTimeOffset, makeImmutable, removeRequestHandler, removeRequestHandler, setEndpoint, setEndpoint, setRegion, setServiceNameIntern, setSignerRegionOverride, setTimeOffset, withEndpoint, withRegion, withRegion, withTimeOffset
equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
setEndpoint, setRegion
@Deprecated public AmazonEC2Client()
AmazonEC2ClientBuilder.defaultClient()
All service calls made using this new client object are blocking, and will not return until the service call completes.
DefaultAWSCredentialsProviderChain
@Deprecated public AmazonEC2Client(ClientConfiguration clientConfiguration)
AwsClientBuilder.withClientConfiguration(ClientConfiguration)
All service calls made using this new client object are blocking, and will not return until the service call completes.
clientConfiguration
- The client configuration options controlling how this client connects to Amazon EC2 (ex: proxy settings,
retry counts, etc.).DefaultAWSCredentialsProviderChain
@Deprecated public AmazonEC2Client(AWSCredentials awsCredentials)
AwsClientBuilder.withCredentials(AWSCredentialsProvider)
for example:
AmazonEC2ClientBuilder.standard().withCredentials(new AWSStaticCredentialsProvider(awsCredentials)).build();
All service calls made using this new client object are blocking, and will not return until the service call completes.
awsCredentials
- The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.@Deprecated public AmazonEC2Client(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration)
AwsClientBuilder.withCredentials(AWSCredentialsProvider)
and
AwsClientBuilder.withClientConfiguration(ClientConfiguration)
All service calls made using this new client object are blocking, and will not return until the service call completes.
awsCredentials
- The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.clientConfiguration
- The client configuration options controlling how this client connects to Amazon EC2 (ex: proxy settings,
retry counts, etc.).@Deprecated public AmazonEC2Client(AWSCredentialsProvider awsCredentialsProvider)
AwsClientBuilder.withCredentials(AWSCredentialsProvider)
All service calls made using this new client object are blocking, and will not return until the service call completes.
awsCredentialsProvider
- The AWS credentials provider which will provide credentials to authenticate requests with AWS services.@Deprecated public AmazonEC2Client(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration)
AwsClientBuilder.withCredentials(AWSCredentialsProvider)
and
AwsClientBuilder.withClientConfiguration(ClientConfiguration)
All service calls made using this new client object are blocking, and will not return until the service call completes.
awsCredentialsProvider
- The AWS credentials provider which will provide credentials to authenticate requests with AWS services.clientConfiguration
- The client configuration options controlling how this client connects to Amazon EC2 (ex: proxy settings,
retry counts, etc.).@Deprecated public AmazonEC2Client(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration, RequestMetricCollector requestMetricCollector)
AwsClientBuilder.withCredentials(AWSCredentialsProvider)
and
AwsClientBuilder.withClientConfiguration(ClientConfiguration)
and
AwsClientBuilder.withMetricsCollector(RequestMetricCollector)
All service calls made using this new client object are blocking, and will not return until the service call completes.
awsCredentialsProvider
- The AWS credentials provider which will provide credentials to authenticate requests with AWS services.clientConfiguration
- The client configuration options controlling how this client connects to Amazon EC2 (ex: proxy settings,
retry counts, etc.).requestMetricCollector
- optional request metric collectorpublic static AmazonEC2ClientBuilder builder()
public AcceptReservedInstancesExchangeQuoteResult acceptReservedInstancesExchangeQuote(AcceptReservedInstancesExchangeQuoteRequest request)
Accepts the Convertible Reserved Instance exchange quote described in the GetReservedInstancesExchangeQuote call.
acceptReservedInstancesExchangeQuote
in interface AmazonEC2
acceptReservedInstancesExchangeQuoteRequest
- Contains the parameters for accepting the quote.public AcceptTransitGatewayMulticastDomainAssociationsResult acceptTransitGatewayMulticastDomainAssociations(AcceptTransitGatewayMulticastDomainAssociationsRequest request)
Accepts a request to associate subnets with a transit gateway multicast domain.
acceptTransitGatewayMulticastDomainAssociations
in interface AmazonEC2
acceptTransitGatewayMulticastDomainAssociationsRequest
- public AcceptTransitGatewayPeeringAttachmentResult acceptTransitGatewayPeeringAttachment(AcceptTransitGatewayPeeringAttachmentRequest request)
Accepts a transit gateway peering attachment request. The peering attachment must be in the
pendingAcceptance
state.
acceptTransitGatewayPeeringAttachment
in interface AmazonEC2
acceptTransitGatewayPeeringAttachmentRequest
- public AcceptTransitGatewayVpcAttachmentResult acceptTransitGatewayVpcAttachment(AcceptTransitGatewayVpcAttachmentRequest request)
Accepts a request to attach a VPC to a transit gateway.
The VPC attachment must be in the pendingAcceptance
state. Use
DescribeTransitGatewayVpcAttachments to view your pending VPC attachment requests. Use
RejectTransitGatewayVpcAttachment to reject a VPC attachment request.
acceptTransitGatewayVpcAttachment
in interface AmazonEC2
acceptTransitGatewayVpcAttachmentRequest
- public AcceptVpcEndpointConnectionsResult acceptVpcEndpointConnections(AcceptVpcEndpointConnectionsRequest request)
Accepts one or more interface VPC endpoint connection requests to your VPC endpoint service.
acceptVpcEndpointConnections
in interface AmazonEC2
acceptVpcEndpointConnectionsRequest
- public AcceptVpcPeeringConnectionResult acceptVpcPeeringConnection(AcceptVpcPeeringConnectionRequest request)
Accept a VPC peering connection request. To accept a request, the VPC peering connection must be in the
pending-acceptance
state, and you must be the owner of the peer VPC. Use
DescribeVpcPeeringConnections to view your outstanding VPC peering connection requests.
For an inter-Region VPC peering connection request, you must accept the VPC peering connection in the Region of the accepter VPC.
acceptVpcPeeringConnection
in interface AmazonEC2
acceptVpcPeeringConnectionRequest
- public AcceptVpcPeeringConnectionResult acceptVpcPeeringConnection()
AmazonEC2
acceptVpcPeeringConnection
in interface AmazonEC2
AmazonEC2.acceptVpcPeeringConnection(AcceptVpcPeeringConnectionRequest)
public AdvertiseByoipCidrResult advertiseByoipCidr(AdvertiseByoipCidrRequest request)
Advertises an IPv4 or IPv6 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP).
You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.
We recommend that you stop advertising the BYOIP CIDR from other locations when you advertise it from AWS. To minimize down time, you can configure your AWS resources to use an address from a BYOIP CIDR before it is advertised, and then simultaneously stop advertising it from the current location and start advertising it through AWS.
It can take a few minutes before traffic to the specified addresses starts routing to AWS because of BGP propagation delays.
To stop advertising the BYOIP CIDR, use WithdrawByoipCidr.
advertiseByoipCidr
in interface AmazonEC2
advertiseByoipCidrRequest
- public AllocateAddressResult allocateAddress(AllocateAddressRequest request)
Allocates an Elastic IP address to your AWS account. After you allocate the Elastic IP address you can associate it with an instance or network interface. After you release an Elastic IP address, it is released to the IP address pool and can be allocated to a different AWS account.
You can allocate an Elastic IP address from an address pool owned by AWS or from an address pool created from a public IPv4 address range that you have brought to AWS for use with your AWS resources using bring your own IP addresses (BYOIP). For more information, see Bring Your Own IP Addresses (BYOIP) in the Amazon Elastic Compute Cloud User Guide.
[EC2-VPC] If you release an Elastic IP address, you might be able to recover it. You cannot recover an Elastic IP address that you released after it is allocated to another AWS account. You cannot recover an Elastic IP address for EC2-Classic. To attempt to recover an Elastic IP address that you released, specify it in this operation.
An Elastic IP address is for use either in the EC2-Classic platform or in a VPC. By default, you can allocate 5 Elastic IP addresses for EC2-Classic per Region and 5 Elastic IP addresses for EC2-VPC per Region.
For more information, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide.
You can allocate a carrier IP address which is a public IP address from a telecommunication carrier, to a network interface which resides in a subnet in a Wavelength Zone (for example an EC2 instance).
allocateAddress
in interface AmazonEC2
allocateAddressRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AllocateAddressRequest request = new AllocateAddressRequest().withDomain("vpc"); AllocateAddressResult response = client.allocateAddress(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AllocateAddressRequest request = new AllocateAddressRequest(); AllocateAddressResult response = client.allocateAddress(request);
public AllocateAddressResult allocateAddress()
AmazonEC2
allocateAddress
in interface AmazonEC2
AmazonEC2.allocateAddress(AllocateAddressRequest)
public AllocateHostsResult allocateHosts(AllocateHostsRequest request)
Allocates a Dedicated Host to your account. At a minimum, specify the supported instance type or instance family, the Availability Zone in which to allocate the host, and the number of hosts to allocate.
allocateHosts
in interface AmazonEC2
allocateHostsRequest
- public ApplySecurityGroupsToClientVpnTargetNetworkResult applySecurityGroupsToClientVpnTargetNetwork(ApplySecurityGroupsToClientVpnTargetNetworkRequest request)
Applies a security group to the association between the target network and the Client VPN endpoint. This action replaces the existing security groups with the specified security groups.
applySecurityGroupsToClientVpnTargetNetwork
in interface AmazonEC2
applySecurityGroupsToClientVpnTargetNetworkRequest
- public AssignIpv6AddressesResult assignIpv6Addresses(AssignIpv6AddressesRequest request)
Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide.
You must specify either the IPv6 addresses or the IPv6 address count in the request.
assignIpv6Addresses
in interface AmazonEC2
assignIpv6AddressesRequest
- public AssignPrivateIpAddressesResult assignPrivateIpAddresses(AssignPrivateIpAddressesRequest request)
Assigns one or more secondary private IP addresses to the specified network interface.
You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide.
When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved.
Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to
another, check network/interfaces/macs/mac/local-ipv4s
in the instance metadata to confirm that the
remapping is complete.
You must specify either the IP addresses or the IP address count in the request.
assignPrivateIpAddresses
in interface AmazonEC2
assignPrivateIpAddressesRequest
- Contains the parameters for AssignPrivateIpAddresses.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssignPrivateIpAddressesRequest request = new AssignPrivateIpAddressesRequest().withNetworkInterfaceId("eni-e5aa89a3").withPrivateIpAddresses( "10.0.0.82"); AssignPrivateIpAddressesResult response = client.assignPrivateIpAddresses(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssignPrivateIpAddressesRequest request = new AssignPrivateIpAddressesRequest().withNetworkInterfaceId("eni-e5aa89a3") .withSecondaryPrivateIpAddressCount(2); AssignPrivateIpAddressesResult response = client.assignPrivateIpAddresses(request);
public AssociateAddressResult associateAddress(AssociateAddressRequest request)
Associates an Elastic IP address, or carrier IP address (for instances that are in subnets in Wavelength Zones) with an instance or a network interface. Before you can use an Elastic IP address, you must allocate it to your account.
An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide.
[EC2-Classic, VPC in an EC2-VPC-only account] If the Elastic IP address is already associated with a different instance, it is disassociated from that instance and associated with the specified instance. If you associate an Elastic IP address with an instance that has an existing Elastic IP address, the existing address is disassociated from the instance, but remains allocated to your account.
[VPC in an EC2-Classic account] If you don't specify a private IP address, the Elastic IP address is associated with the primary IP address. If the Elastic IP address is already associated with a different instance or a network interface, you get an error unless you allow reassociation. You cannot associate an Elastic IP address with an instance or network interface that has an existing Elastic IP address.
[Subnets in Wavelength Zones] You can associate an IP address from the telecommunication carrier to the instance or network interface.
You cannot associate an Elastic IP address with an interface in a different network border group.
This is an idempotent operation. If you perform the operation more than once, Amazon EC2 doesn't return an error, and you may be charged for each time the Elastic IP address is remapped to the same instance. For more information, see the Elastic IP Addresses section of Amazon EC2 Pricing.
associateAddress
in interface AmazonEC2
associateAddressRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssociateAddressRequest request = new AssociateAddressRequest().withAllocationId("eipalloc-64d5890a").withInstanceId("i-0b263919b6498b123"); AssociateAddressResult response = client.associateAddress(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssociateAddressRequest request = new AssociateAddressRequest().withAllocationId("eipalloc-64d5890a").withNetworkInterfaceId("eni-1a2b3c4d"); AssociateAddressResult response = client.associateAddress(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssociateAddressRequest request = new AssociateAddressRequest().withInstanceId("i-07ffe74c7330ebf53").withPublicIp("198.51.100.0"); AssociateAddressResult response = client.associateAddress(request);
public AssociateClientVpnTargetNetworkResult associateClientVpnTargetNetwork(AssociateClientVpnTargetNetworkRequest request)
Associates a target network with a Client VPN endpoint. A target network is a subnet in a VPC. You can associate multiple subnets from the same VPC with a Client VPN endpoint. You can associate only one subnet in each Availability Zone. We recommend that you associate at least two subnets to provide Availability Zone redundancy.
If you specified a VPC when you created the Client VPN endpoint or if you have previous subnet associations, the specified subnet must be in the same VPC. To specify a subnet that's in a different VPC, you must first modify the Client VPN endpoint (ModifyClientVpnEndpoint) and change the VPC that's associated with it.
associateClientVpnTargetNetwork
in interface AmazonEC2
associateClientVpnTargetNetworkRequest
- public AssociateDhcpOptionsResult associateDhcpOptions(AssociateDhcpOptionsRequest request)
Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC.
After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance.
For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
associateDhcpOptions
in interface AmazonEC2
associateDhcpOptionsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssociateDhcpOptionsRequest request = new AssociateDhcpOptionsRequest().withDhcpOptionsId("dopt-d9070ebb").withVpcId("vpc-a01106c2"); AssociateDhcpOptionsResult response = client.associateDhcpOptions(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssociateDhcpOptionsRequest request = new AssociateDhcpOptionsRequest().withDhcpOptionsId("default").withVpcId("vpc-a01106c2"); AssociateDhcpOptionsResult response = client.associateDhcpOptions(request);
public AssociateEnclaveCertificateIamRoleResult associateEnclaveCertificateIamRole(AssociateEnclaveCertificateIamRoleRequest request)
Associates an AWS Identity and Access Management (IAM) role with an AWS Certificate Manager (ACM) certificate. This enables the certificate to be used by the ACM for Nitro Enclaves application inside an enclave. For more information, see AWS Certificate Manager for Nitro Enclaves in the AWS Nitro Enclaves User Guide.
When the IAM role is associated with the ACM certificate, places the certificate, certificate chain, and encrypted private key in an Amazon S3 bucket that only the associated IAM role can access. The private key of the certificate is encrypted with an AWS-managed KMS customer master (CMK) that has an attached attestation-based CMK policy.
To enable the IAM role to access the Amazon S3 object, you must grant it permission to call
s3:GetObject
on the Amazon S3 bucket returned by the command. To enable the IAM role to access the
AWS KMS CMK, you must grant it permission to call kms:Decrypt
on AWS KMS CMK returned by the
command. For more information, see Grant the role
permission to access the certificate and encryption key in the AWS Nitro Enclaves User Guide.
associateEnclaveCertificateIamRole
in interface AmazonEC2
associateEnclaveCertificateIamRoleRequest
- public AssociateIamInstanceProfileResult associateIamInstanceProfile(AssociateIamInstanceProfileRequest request)
Associates an IAM instance profile with a running or stopped instance. You cannot associate more than one IAM instance profile with an instance.
associateIamInstanceProfile
in interface AmazonEC2
associateIamInstanceProfileRequest
- public AssociateRouteTableResult associateRouteTable(AssociateRouteTableRequest request)
Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets.
For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
associateRouteTable
in interface AmazonEC2
associateRouteTableRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AssociateRouteTableRequest request = new AssociateRouteTableRequest().withRouteTableId("rtb-22574640").withSubnetId("subnet-9d4a7b6"); AssociateRouteTableResult response = client.associateRouteTable(request);
public AssociateSubnetCidrBlockResult associateSubnetCidrBlock(AssociateSubnetCidrBlockRequest request)
Associates a CIDR block with your subnet. You can only associate a single IPv6 CIDR block with your subnet. An IPv6 CIDR block must have a prefix length of /64.
associateSubnetCidrBlock
in interface AmazonEC2
associateSubnetCidrBlockRequest
- public AssociateTransitGatewayMulticastDomainResult associateTransitGatewayMulticastDomain(AssociateTransitGatewayMulticastDomainRequest request)
Associates the specified subnets and transit gateway attachments with the specified transit gateway multicast domain.
The transit gateway attachment must be in the available state before you can add a resource. Use DescribeTransitGatewayAttachments to see the state of the attachment.
associateTransitGatewayMulticastDomain
in interface AmazonEC2
associateTransitGatewayMulticastDomainRequest
- public AssociateTransitGatewayRouteTableResult associateTransitGatewayRouteTable(AssociateTransitGatewayRouteTableRequest request)
Associates the specified attachment with the specified transit gateway route table. You can associate only one route table with an attachment.
associateTransitGatewayRouteTable
in interface AmazonEC2
associateTransitGatewayRouteTableRequest
- public AssociateVpcCidrBlockResult associateVpcCidrBlock(AssociateVpcCidrBlockRequest request)
Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56.
You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block.
For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and Subnet Sizing in the Amazon Virtual Private Cloud User Guide.
associateVpcCidrBlock
in interface AmazonEC2
associateVpcCidrBlockRequest
- public AttachClassicLinkVpcResult attachClassicLinkVpc(AttachClassicLinkVpcRequest request)
Links an EC2-Classic instance to a ClassicLink-enabled VPC through one or more of the VPC's security groups. You
cannot link an EC2-Classic instance to more than one VPC at a time. You can only link an instance that's in the
running
state. An instance is automatically unlinked from a VPC when it's stopped - you can link it
to the VPC again when you restart it.
After you've linked an instance, you cannot change the VPC security groups that are associated with it. To change the security groups, you must first unlink the instance, and then link it again.
Linking your instance to a VPC is sometimes referred to as attaching your instance.
attachClassicLinkVpc
in interface AmazonEC2
attachClassicLinkVpcRequest
- public AttachInternetGatewayResult attachInternetGateway(AttachInternetGatewayRequest request)
Attaches an internet gateway or a virtual private gateway to a VPC, enabling connectivity between the internet and the VPC. For more information about your VPC and internet gateway, see the Amazon Virtual Private Cloud User Guide.
attachInternetGateway
in interface AmazonEC2
attachInternetGatewayRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AttachInternetGatewayRequest request = new AttachInternetGatewayRequest().withInternetGatewayId("igw-c0a643a9").withVpcId("vpc-a01106c2"); AttachInternetGatewayResult response = client.attachInternetGateway(request);
public AttachNetworkInterfaceResult attachNetworkInterface(AttachNetworkInterfaceRequest request)
Attaches a network interface to an instance.
attachNetworkInterface
in interface AmazonEC2
attachNetworkInterfaceRequest
- Contains the parameters for AttachNetworkInterface.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AttachNetworkInterfaceRequest request = new AttachNetworkInterfaceRequest().withDeviceIndex(1).withInstanceId("i-1234567890abcdef0") .withNetworkInterfaceId("eni-e5aa89a3"); AttachNetworkInterfaceResult response = client.attachNetworkInterface(request);
public AttachVolumeResult attachVolume(AttachVolumeRequest request)
Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name.
Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
After you attach an EBS volume, you must make it available. For more information, see Making an EBS volume available for use.
If a volume has an AWS Marketplace product code:
The volume can be attached only to a stopped instance.
AWS Marketplace product codes are copied from the volume to the instance.
You must be subscribed to the product.
The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.
For more information, see Attaching Amazon EBS volumes in the Amazon Elastic Compute Cloud User Guide.
attachVolume
in interface AmazonEC2
attachVolumeRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); AttachVolumeRequest request = new AttachVolumeRequest().withDevice("/dev/sdf").withInstanceId("i-01474ef662b89480") .withVolumeId("vol-1234567890abcdef0"); AttachVolumeResult response = client.attachVolume(request);
public AttachVpnGatewayResult attachVpnGateway(AttachVpnGatewayRequest request)
Attaches a virtual private gateway to a VPC. You can attach one virtual private gateway to one VPC at a time.
For more information, see AWS Site-to-Site VPN in the AWS Site-to-Site VPN User Guide.
attachVpnGateway
in interface AmazonEC2
attachVpnGatewayRequest
- Contains the parameters for AttachVpnGateway.public AuthorizeClientVpnIngressResult authorizeClientVpnIngress(AuthorizeClientVpnIngressRequest request)
Adds an ingress authorization rule to a Client VPN endpoint. Ingress authorization rules act as firewall rules that grant access to networks. You must configure ingress authorization rules to enable clients to access resources in AWS or on-premises networks.
authorizeClientVpnIngress
in interface AmazonEC2
authorizeClientVpnIngressRequest
- public AuthorizeSecurityGroupEgressResult authorizeSecurityGroupEgress(AuthorizeSecurityGroupEgressRequest request)
[VPC only] Adds the specified egress rules to a security group for use with a VPC.
An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 CIDR address ranges, or to the instances associated with the specified destination security groups.
You specify a protocol for each rule (for example, TCP). For the TCP and UDP protocols, you must also specify the destination port or port range. For the ICMP protocol, you must also specify the ICMP type and code. You can use -1 for the type or code to mean all types or all codes.
Rule changes are propagated to affected instances as quickly as possible. However, a small delay might occur.
For more information about VPC security group limits, see Amazon VPC Limits.
authorizeSecurityGroupEgress
in interface AmazonEC2
authorizeSecurityGroupEgressRequest
- public AuthorizeSecurityGroupIngressResult authorizeSecurityGroupIngress(AuthorizeSecurityGroupIngressRequest request)
Adds the specified ingress rules to a security group.
An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 CIDR address ranges, or from the instances associated with the specified destination security groups.
You specify a protocol for each rule (for example, TCP). For TCP and UDP, you must also specify the destination port or port range. For ICMP/ICMPv6, you must also specify the ICMP/ICMPv6 type and code. You can use -1 to mean all types or all codes.
Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.
For more information about VPC security group limits, see Amazon VPC Limits.
authorizeSecurityGroupIngress
in interface AmazonEC2
authorizeSecurityGroupIngressRequest
- public BundleInstanceResult bundleInstance(BundleInstanceRequest request)
Bundles an Amazon instance store-backed Windows instance.
During bundling, only the root device volume (C:\) is bundled. Data on other instance store volumes is not preserved.
This action is not applicable for Linux/Unix instances or Windows instances that are backed by Amazon EBS.
bundleInstance
in interface AmazonEC2
bundleInstanceRequest
- Contains the parameters for BundleInstance.public CancelBundleTaskResult cancelBundleTask(CancelBundleTaskRequest request)
Cancels a bundling operation for an instance store-backed Windows instance.
cancelBundleTask
in interface AmazonEC2
cancelBundleTaskRequest
- Contains the parameters for CancelBundleTask.public CancelCapacityReservationResult cancelCapacityReservation(CancelCapacityReservationRequest request)
Cancels the specified Capacity Reservation, releases the reserved capacity, and changes the Capacity
Reservation's state to cancelled
.
Instances running in the reserved capacity continue running until you stop them. Stopped instances that target the Capacity Reservation can no longer launch. Modify these instances to either target a different Capacity Reservation, launch On-Demand Instance capacity, or run in any open Capacity Reservation that has matching attributes and sufficient capacity.
cancelCapacityReservation
in interface AmazonEC2
cancelCapacityReservationRequest
- public CancelConversionTaskResult cancelConversionTask(CancelConversionTaskRequest request)
Cancels an active conversion task. The task can be the import of an instance or volume. The action removes all artifacts of the conversion, including a partially uploaded volume or instance. If the conversion is complete or is in the process of transferring the final disk image, the command fails and returns an exception.
For more information, see Importing a Virtual Machine Using the Amazon EC2 CLI.
cancelConversionTask
in interface AmazonEC2
cancelConversionTaskRequest
- public CancelExportTaskResult cancelExportTask(CancelExportTaskRequest request)
Cancels an active export task. The request removes all artifacts of the export, including any partially-created Amazon S3 objects. If the export task is complete or is in the process of transferring the final disk image, the command fails and returns an error.
cancelExportTask
in interface AmazonEC2
cancelExportTaskRequest
- public CancelImportTaskResult cancelImportTask(CancelImportTaskRequest request)
Cancels an in-process import virtual machine or import snapshot task.
cancelImportTask
in interface AmazonEC2
cancelImportTaskRequest
- public CancelImportTaskResult cancelImportTask()
AmazonEC2
cancelImportTask
in interface AmazonEC2
AmazonEC2.cancelImportTask(CancelImportTaskRequest)
public CancelReservedInstancesListingResult cancelReservedInstancesListing(CancelReservedInstancesListingRequest request)
Cancels the specified Reserved Instance listing in the Reserved Instance Marketplace.
For more information, see Reserved Instance Marketplace in the Amazon EC2 User Guide.
cancelReservedInstancesListing
in interface AmazonEC2
cancelReservedInstancesListingRequest
- Contains the parameters for CancelReservedInstancesListing.public CancelSpotFleetRequestsResult cancelSpotFleetRequests(CancelSpotFleetRequestsRequest request)
Cancels the specified Spot Fleet requests.
After you cancel a Spot Fleet request, the Spot Fleet launches no new Spot Instances. You must specify whether
the Spot Fleet should also terminate its Spot Instances. If you terminate the instances, the Spot Fleet request
enters the cancelled_terminating
state. Otherwise, the Spot Fleet request enters the
cancelled_running
state and the instances continue to run until they are interrupted or you
terminate them manually.
cancelSpotFleetRequests
in interface AmazonEC2
cancelSpotFleetRequestsRequest
- Contains the parameters for CancelSpotFleetRequests.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CancelSpotFleetRequestsRequest request = new CancelSpotFleetRequestsRequest().withSpotFleetRequestIds("sfr-73fbd2ce-aa30-494c-8788-1cee4EXAMPLE") .withTerminateInstances(true); CancelSpotFleetRequestsResult response = client.cancelSpotFleetRequests(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CancelSpotFleetRequestsRequest request = new CancelSpotFleetRequestsRequest().withSpotFleetRequestIds("sfr-73fbd2ce-aa30-494c-8788-1cee4EXAMPLE") .withTerminateInstances(false); CancelSpotFleetRequestsResult response = client.cancelSpotFleetRequests(request);
public CancelSpotInstanceRequestsResult cancelSpotInstanceRequests(CancelSpotInstanceRequestsRequest request)
Cancels one or more Spot Instance requests.
Canceling a Spot Instance request does not terminate running Spot Instances associated with the request.
cancelSpotInstanceRequests
in interface AmazonEC2
cancelSpotInstanceRequestsRequest
- Contains the parameters for CancelSpotInstanceRequests.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CancelSpotInstanceRequestsRequest request = new CancelSpotInstanceRequestsRequest().withSpotInstanceRequestIds("sir-08b93456"); CancelSpotInstanceRequestsResult response = client.cancelSpotInstanceRequests(request);
public ConfirmProductInstanceResult confirmProductInstance(ConfirmProductInstanceRequest request)
Determines whether a product code is associated with an instance. This action can only be used by the owner of the product code. It is useful when a product code owner must verify whether another user's instance is eligible for support.
confirmProductInstance
in interface AmazonEC2
confirmProductInstanceRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); ConfirmProductInstanceRequest request = new ConfirmProductInstanceRequest().withInstanceId("i-1234567890abcdef0").withProductCode("774F4FF8"); ConfirmProductInstanceResult response = client.confirmProductInstance(request);
public CopyFpgaImageResult copyFpgaImage(CopyFpgaImageRequest request)
Copies the specified Amazon FPGA Image (AFI) to the current Region.
copyFpgaImage
in interface AmazonEC2
copyFpgaImageRequest
- public CopyImageResult copyImage(CopyImageRequest request)
Initiates the copy of an AMI. You can copy an AMI from one Region to another, or from a Region to an AWS Outpost. You can't copy an AMI from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
To copy an AMI from one Region to another, specify the source Region using the SourceRegion parameter, and
specify the destination Region using its endpoint. Copies of encrypted backing snapshots for the AMI are
encrypted. Copies of unencrypted backing snapshots remain unencrypted, unless you set Encrypted
during the copy operation. You cannot create an unencrypted copy of an encrypted backing snapshot.
To copy an AMI from a Region to an Outpost, specify the source Region using the SourceRegion parameter, and specify the ARN of the destination Outpost using DestinationOutpostArn. Backing snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
For more information about the prerequisites and limits when copying an AMI, see Copying an AMI in the Amazon Elastic Compute Cloud User Guide.
copyImage
in interface AmazonEC2
copyImageRequest
- Contains the parameters for CopyImage.public CopySnapshotResult copySnapshot(CopySnapshotRequest request)
Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs).
When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default AWS Key Management Service (AWS KMS) customer master key (CMK); however, you can specify a different CMK. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the CMK used to encrypt the snapshot.
Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose.
For more information, see Copying an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
copySnapshot
in interface AmazonEC2
copySnapshotRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CopySnapshotRequest request = new CopySnapshotRequest().withDescription("This is my copied snapshot.").withDestinationRegion("us-east-1") .withSourceRegion("us-west-2").withSourceSnapshotId("snap-066877671789bd71b"); CopySnapshotResult response = client.copySnapshot(request);
public CreateCapacityReservationResult createCapacityReservation(CreateCapacityReservationRequest request)
Creates a new Capacity Reservation with the specified attributes.
Capacity Reservations enable you to reserve capacity for your Amazon EC2 instances in a specific Availability Zone for any duration. This gives you the flexibility to selectively add capacity reservations and still get the Regional RI discounts for that usage. By creating Capacity Reservations, you ensure that you always have access to Amazon EC2 capacity when you need it, for as long as you need it. For more information, see Capacity Reservations in the Amazon EC2 User Guide.
Your request to create a Capacity Reservation could fail if Amazon EC2 does not have sufficient capacity to fulfill the request. If your request fails due to Amazon EC2 capacity constraints, either try again at a later time, try in a different Availability Zone, or request a smaller capacity reservation. If your application is flexible across instance types and sizes, try to create a Capacity Reservation with different instance attributes.
Your request could also fail if the requested quantity exceeds your On-Demand Instance limit for the selected instance type. If your request fails due to limit constraints, increase your On-Demand Instance limit for the required instance type and try again. For more information about increasing your instance limits, see Amazon EC2 Service Quotas in the Amazon EC2 User Guide.
createCapacityReservation
in interface AmazonEC2
createCapacityReservationRequest
- public CreateCarrierGatewayResult createCarrierGateway(CreateCarrierGatewayRequest request)
Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the AWS Wavelength Developer Guide.
createCarrierGateway
in interface AmazonEC2
createCarrierGatewayRequest
- public CreateClientVpnEndpointResult createClientVpnEndpoint(CreateClientVpnEndpointRequest request)
Creates a Client VPN endpoint. A Client VPN endpoint is the resource you create and configure to enable and manage client VPN sessions. It is the destination endpoint at which all client VPN sessions are terminated.
createClientVpnEndpoint
in interface AmazonEC2
createClientVpnEndpointRequest
- public CreateClientVpnRouteResult createClientVpnRoute(CreateClientVpnRouteRequest request)
Adds a route to a network to a Client VPN endpoint. Each Client VPN endpoint has a route table that describes the available destination network routes. Each route in the route table specifies the path for traffic to specific resources or networks.
createClientVpnRoute
in interface AmazonEC2
createClientVpnRouteRequest
- public CreateCustomerGatewayResult createCustomerGateway(CreateCustomerGatewayRequest request)
Provides information to AWS about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the AWS side of the VPN connection is the virtual private gateway.) You must provide the internet-routable IP address of the customer gateway's external interface. The IP address must be static and can be behind a device performing network address translation (NAT).
For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN (in the 64512 - 65534 range).
Amazon EC2 supports all 4-byte ASN numbers in the range of 1 - 2147483647, with the exception of the following:
7224 - reserved in the us-east-1
Region
9059 - reserved in the eu-west-1
Region
17943 - reserved in the ap-southeast-1
Region
10124 - reserved in the ap-northeast-1
Region
For more information, see AWS Site-to-Site VPN in the AWS Site-to-Site VPN User Guide.
To create more than one customer gateway with the same VPN type, IP address, and BGP ASN, specify a unique device name for each customer gateway. Identical requests return information about the existing customer gateway and do not create new customer gateways.
createCustomerGateway
in interface AmazonEC2
createCustomerGatewayRequest
- Contains the parameters for CreateCustomerGateway.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateCustomerGatewayRequest request = new CreateCustomerGatewayRequest().withBgpAsn(65534).withPublicIp("12.1.2.3").withType("ipsec.1"); CreateCustomerGatewayResult response = client.createCustomerGateway(request);
public CreateDefaultSubnetResult createDefaultSubnet(CreateDefaultSubnetRequest request)
Creates a default subnet with a size /20
IPv4 CIDR block in the specified Availability Zone in your
default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a Default
Subnet in the Amazon Virtual Private Cloud User Guide.
createDefaultSubnet
in interface AmazonEC2
createDefaultSubnetRequest
- public CreateDefaultVpcResult createDefaultVpc(CreateDefaultVpcRequest request)
Creates a default VPC with a size /16
IPv4 CIDR block and a default subnet in each Availability
Zone. For more information about the components of a default VPC, see Default VPC and Default Subnets in
the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC
yourself.
If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region.
If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
createDefaultVpc
in interface AmazonEC2
createDefaultVpcRequest
- public CreateDhcpOptionsResult createDhcpOptions(CreateDhcpOptionsRequest request)
Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.
domain-name-servers
- The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The
default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the
IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as
specified in domain-name
, you must set domain-name-servers
to a custom DNS server.
domain-name
- If you're using AmazonProvidedDNS in us-east-1
, specify
ec2.internal
. If you're using AmazonProvidedDNS in another Region, specify
region.compute.internal
(for example, ap-northeast-1.compute.internal
). Otherwise,
specify a domain name (for example, ExampleCompany.com
). This value is used to complete unqualified
DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces.
However, Windows and other Linux operating systems treat the value as a single domain, which results in
unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating
systems, specify only one domain name.
ntp-servers
- The IP addresses of up to four Network Time Protocol (NTP) servers.
netbios-name-servers
- The IP addresses of up to four NetBIOS name servers.
netbios-node-type
- The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2
(broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.
Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide
(AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set
the domain-name-servers
option either to AmazonProvidedDNS
or to a domain name server
of your choice. For more information, see DHCP Options Sets in the
Amazon Virtual Private Cloud User Guide.
createDhcpOptions
in interface AmazonEC2
createDhcpOptionsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateDhcpOptionsRequest request = new CreateDhcpOptionsRequest().withDhcpConfigurations(new DhcpConfiguration().withKey("domain-name-servers") .withValues("10.2.5.1", "10.2.5.2")); CreateDhcpOptionsResult response = client.createDhcpOptions(request);
public CreateEgressOnlyInternetGatewayResult createEgressOnlyInternetGateway(CreateEgressOnlyInternetGatewayRequest request)
[IPv6 only] Creates an egress-only internet gateway for your VPC. An egress-only internet gateway is used to enable outbound communication over IPv6 from instances in your VPC to the internet, and prevents hosts outside of your VPC from initiating an IPv6 connection with your instance.
createEgressOnlyInternetGateway
in interface AmazonEC2
createEgressOnlyInternetGatewayRequest
- public CreateFleetResult createFleet(CreateFleetRequest request)
Launches an EC2 Fleet.
You can create a single EC2 Fleet that includes multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet.
For more information, see Launching an EC2 Fleet in the Amazon EC2 User Guide.
createFleet
in interface AmazonEC2
createFleetRequest
- public CreateFlowLogsResult createFlowLogs(CreateFlowLogsRequest request)
Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.
Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow Log Records in the Amazon Virtual Private Cloud User Guide.
When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket.
For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
createFlowLogs
in interface AmazonEC2
createFlowLogsRequest
- public CreateFpgaImageResult createFpgaImage(CreateFpgaImageRequest request)
Creates an Amazon FPGA Image (AFI) from the specified design checkpoint (DCP).
The create operation is asynchronous. To verify that the AFI is ready for use, check the output logs.
An AFI contains the FPGA bitstream that is ready to download to an FPGA. You can securely deploy an AFI on multiple FPGA-accelerated instances. For more information, see the AWS FPGA Hardware Development Kit.
createFpgaImage
in interface AmazonEC2
createFpgaImageRequest
- public CreateImageResult createImage(CreateImageRequest request)
Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped.
If you customized your instance with instance store volumes or EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes.
For more information, see Creating Amazon EBS-Backed Linux AMIs in the Amazon Elastic Compute Cloud User Guide.
createImage
in interface AmazonEC2
createImageRequest
- public CreateInstanceExportTaskResult createInstanceExportTask(CreateInstanceExportTaskRequest request)
Exports a running or stopped instance to an Amazon S3 bucket.
For information about the supported operating systems, image formats, and known limitations for the types of instances you can export, see Exporting an Instance as a VM Using VM Import/Export in the VM Import/Export User Guide.
createInstanceExportTask
in interface AmazonEC2
createInstanceExportTaskRequest
- public CreateInternetGatewayResult createInternetGateway(CreateInternetGatewayRequest request)
Creates an internet gateway for use with a VPC. After creating the internet gateway, you attach it to a VPC using AttachInternetGateway.
For more information about your VPC and internet gateway, see the Amazon Virtual Private Cloud User Guide.
createInternetGateway
in interface AmazonEC2
createInternetGatewayRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateInternetGatewayRequest request = new CreateInternetGatewayRequest(); CreateInternetGatewayResult response = client.createInternetGateway(request);
public CreateInternetGatewayResult createInternetGateway()
AmazonEC2
createInternetGateway
in interface AmazonEC2
AmazonEC2.createInternetGateway(CreateInternetGatewayRequest)
public CreateKeyPairResult createKeyPair(CreateKeyPairRequest request)
Creates a 2048-bit RSA key pair with the specified name. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#1 private key. If a key with the specified name already exists, Amazon EC2 returns an error.
You can have up to five thousand key pairs per Region.
The key pair returned to you is available only in the Region in which you create it. If you prefer, you can create your own key pair using a third-party tool and upload it to any Region using ImportKeyPair.
For more information, see Key Pairs in the Amazon Elastic Compute Cloud User Guide.
createKeyPair
in interface AmazonEC2
createKeyPairRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateKeyPairRequest request = new CreateKeyPairRequest().withKeyName("my-key-pair"); CreateKeyPairResult response = client.createKeyPair(request);
public CreateLaunchTemplateResult createLaunchTemplate(CreateLaunchTemplateRequest request)
Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launching an instance from a launch templatein the Amazon Elastic Compute Cloud User Guide.
createLaunchTemplate
in interface AmazonEC2
createLaunchTemplateRequest
- public CreateLaunchTemplateVersionResult createLaunchTemplateVersion(CreateLaunchTemplateVersionRequest request)
Creates a new version for a launch template. You can specify an existing version of launch template from which to base the new version.
Launch template versions are numbered in the order in which they are created. You cannot specify, change, or replace the numbering of launch template versions.
For more information, see Managing launch template versionsin the Amazon Elastic Compute Cloud User Guide.
createLaunchTemplateVersion
in interface AmazonEC2
createLaunchTemplateVersionRequest
- public CreateLocalGatewayRouteResult createLocalGatewayRoute(CreateLocalGatewayRouteRequest request)
Creates a static route for the specified local gateway route table.
createLocalGatewayRoute
in interface AmazonEC2
createLocalGatewayRouteRequest
- public CreateLocalGatewayRouteTableVpcAssociationResult createLocalGatewayRouteTableVpcAssociation(CreateLocalGatewayRouteTableVpcAssociationRequest request)
Associates the specified VPC with the specified local gateway route table.
createLocalGatewayRouteTableVpcAssociation
in interface AmazonEC2
createLocalGatewayRouteTableVpcAssociationRequest
- public CreateManagedPrefixListResult createManagedPrefixList(CreateManagedPrefixListRequest request)
Creates a managed prefix list. You can specify one or more entries for the prefix list. Each entry consists of a CIDR block and an optional description.
You must specify the maximum number of entries for the prefix list. The maximum number of entries cannot be changed later.
createManagedPrefixList
in interface AmazonEC2
createManagedPrefixListRequest
- public CreateNatGatewayResult createNatGateway(CreateNatGatewayRequest request)
Creates a NAT gateway in the specified public subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. Internet-bound traffic from a private subnet can be routed to the NAT gateway, therefore enabling instances in the private subnet to connect to the internet. For more information, see NAT Gateways in the Amazon Virtual Private Cloud User Guide.
createNatGateway
in interface AmazonEC2
createNatGatewayRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateNatGatewayRequest request = new CreateNatGatewayRequest().withAllocationId("eipalloc-37fc1a52").withSubnetId("subnet-1a2b3c4d"); CreateNatGatewayResult response = client.createNatGateway(request);
public CreateNetworkAclResult createNetworkAcl(CreateNetworkAclRequest request)
Creates a network ACL in a VPC. Network ACLs provide an optional layer of security (in addition to security groups) for the instances in your VPC.
For more information, see Network ACLs in the Amazon Virtual Private Cloud User Guide.
createNetworkAcl
in interface AmazonEC2
createNetworkAclRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateNetworkAclRequest request = new CreateNetworkAclRequest().withVpcId("vpc-a01106c2"); CreateNetworkAclResult response = client.createNetworkAcl(request);
public CreateNetworkAclEntryResult createNetworkAclEntry(CreateNetworkAclEntryRequest request)
Creates an entry (a rule) in a network ACL with the specified rule number. Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the ACL, we process the entries in the ACL according to the rule numbers, in ascending order. Each network ACL has a set of ingress rules and a separate set of egress rules.
We recommend that you leave room between the rule numbers (for example, 100, 110, 120, ...), and not number them one right after the other (for example, 101, 102, 103, ...). This makes it easier to add a rule between existing ones without having to renumber the rules.
After you add an entry, you can't modify it; you must either replace it, or create an entry and delete the old one.
For more information about network ACLs, see Network ACLs in the Amazon Virtual Private Cloud User Guide.
createNetworkAclEntry
in interface AmazonEC2
createNetworkAclEntryRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateNetworkAclEntryRequest request = new CreateNetworkAclEntryRequest().withCidrBlock("0.0.0.0/0").withEgress(false).withNetworkAclId("acl-5fb85d36") .withPortRange(new PortRange().withFrom(53).withTo(53)).withProtocol("udp").withRuleAction("allow").withRuleNumber(100); CreateNetworkAclEntryResult response = client.createNetworkAclEntry(request);
public CreateNetworkInsightsPathResult createNetworkInsightsPath(CreateNetworkInsightsPathRequest request)
Creates a path to analyze for reachability.
Reachability Analyzer enables you to analyze and debug network reachability between two resources in your virtual private cloud (VPC). For more information, see What is Reachability Analyzer.
createNetworkInsightsPath
in interface AmazonEC2
createNetworkInsightsPathRequest
- public CreateNetworkInterfaceResult createNetworkInterface(CreateNetworkInterfaceRequest request)
Creates a network interface in the specified subnet.
For more information about network interfaces, see Elastic Network Interfaces in the Amazon Virtual Private Cloud User Guide.
createNetworkInterface
in interface AmazonEC2
createNetworkInterfaceRequest
- Contains the parameters for CreateNetworkInterface.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateNetworkInterfaceRequest request = new CreateNetworkInterfaceRequest().withDescription("my network interface").withGroups("sg-903004f8") .withPrivateIpAddress("10.0.2.17").withSubnetId("subnet-9d4a7b6c"); CreateNetworkInterfaceResult response = client.createNetworkInterface(request);
public CreateNetworkInterfacePermissionResult createNetworkInterfacePermission(CreateNetworkInterfacePermissionRequest request)
Grants an AWS-authorized account permission to attach the specified network interface to an instance in their account.
You can grant permission to a single AWS account only, and only one account at a time.
createNetworkInterfacePermission
in interface AmazonEC2
createNetworkInterfacePermissionRequest
- Contains the parameters for CreateNetworkInterfacePermission.public CreatePlacementGroupResult createPlacementGroup(CreatePlacementGroupRequest request)
Creates a placement group in which to launch instances. The strategy of the placement group determines how the instances are organized within the group.
A cluster
placement group is a logical grouping of instances within a single Availability Zone that
benefit from low network latency, high network throughput. A spread
placement group places instances
on distinct hardware. A partition
placement group places groups of instances in different
partitions, where instances in one partition do not share the same hardware with instances in another partition.
For more information, see Placement groups in the Amazon EC2 User Guide.
createPlacementGroup
in interface AmazonEC2
createPlacementGroupRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreatePlacementGroupRequest request = new CreatePlacementGroupRequest().withGroupName("my-cluster").withStrategy("cluster"); CreatePlacementGroupResult response = client.createPlacementGroup(request);
public CreateReservedInstancesListingResult createReservedInstancesListing(CreateReservedInstancesListingRequest request)
Creates a listing for Amazon EC2 Standard Reserved Instances to be sold in the Reserved Instance Marketplace. You can submit one Standard Reserved Instance listing at a time. To get a list of your Standard Reserved Instances, you can use the DescribeReservedInstances operation.
Only Standard Reserved Instances can be sold in the Reserved Instance Marketplace. Convertible Reserved Instances cannot be sold.
The Reserved Instance Marketplace matches sellers who want to resell Standard Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold through the Reserved Instance Marketplace work like any other Reserved Instances.
To sell your Standard Reserved Instances, you must first register as a seller in the Reserved Instance Marketplace. After completing the registration process, you can create a Reserved Instance Marketplace listing of some or all of your Standard Reserved Instances, and specify the upfront price to receive for them. Your Standard Reserved Instance listings then become available for purchase. To view the details of your Standard Reserved Instance listing, you can use the DescribeReservedInstancesListings operation.
For more information, see Reserved Instance Marketplace in the Amazon EC2 User Guide.
createReservedInstancesListing
in interface AmazonEC2
createReservedInstancesListingRequest
- Contains the parameters for CreateReservedInstancesListing.public CreateRouteResult createRoute(CreateRouteRequest request)
Creates a route in a route table within a VPC.
You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway.
When determining how to route traffic, we use the route with the most specific match. For example, traffic is
destined for the IPv4 address 192.0.2.3
, and the route table includes the following two IPv4 routes:
192.0.2.0/24
(goes to some target A)
192.0.2.0/28
(goes to some target B)
Both routes apply to the traffic destined for 192.0.2.3
. However, the second route in the list
covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where
to target the traffic.
For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
createRoute
in interface AmazonEC2
createRouteRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateRouteRequest request = new CreateRouteRequest().withDestinationCidrBlock("0.0.0.0/0").withGatewayId("igw-c0a643a9") .withRouteTableId("rtb-22574640"); CreateRouteResult response = client.createRoute(request);
public CreateRouteTableResult createRouteTable(CreateRouteTableRequest request)
Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet.
For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
createRouteTable
in interface AmazonEC2
createRouteTableRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateRouteTableRequest request = new CreateRouteTableRequest().withVpcId("vpc-a01106c2"); CreateRouteTableResult response = client.createRouteTable(request);
public CreateSecurityGroupResult createSecurityGroup(CreateSecurityGroupRequest request)
Creates a security group.
A security group acts as a virtual firewall for your instance to control inbound and outbound traffic. For more information, see Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC in the Amazon Virtual Private Cloud User Guide.
When you create a security group, you specify a friendly name of your choice. You can have a security group for use in EC2-Classic with the same name as a security group for use in a VPC. However, you can't have two security groups for use in EC2-Classic with the same name or two security groups for use in a VPC with the same name.
You have a default security group for use in EC2-Classic and a default security group for use in your VPC. If you don't specify a security group when you launch an instance, the instance is launched into the appropriate default security group. A default security group includes a default rule that grants instances unrestricted network access to each other.
You can add or remove rules from your security groups using AuthorizeSecurityGroupIngress, AuthorizeSecurityGroupEgress, RevokeSecurityGroupIngress, and RevokeSecurityGroupEgress.
For more information about VPC security group limits, see Amazon VPC Limits.
createSecurityGroup
in interface AmazonEC2
createSecurityGroupRequest
- public CreateSnapshotResult createSnapshot(CreateSnapshotRequest request)
Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance.
You can create snapshots of volumes in a Region and volumes on an Outpost. If you create a snapshot of a volume in a Region, the snapshot must be stored in the same Region as the volume. If you create a snapshot of a volume on an Outpost, the snapshot can be stored on the same Outpost as the volume, or in the Region for that Outpost.
When a snapshot is created, any AWS Marketplace product codes that are associated with the source volume are propagated to the snapshot.
You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been
written to your EBS volume at the time the snapshot command is issued; this might exclude any data that has been
cached by any applications or the operating system. If you can pause any file systems on the volume long enough
to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume,
you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume
to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is
pending
.
To create a snapshot for EBS volumes that serve as root devices, you should stop the instance before taking the snapshot.
Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected.
You can tag your snapshots during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.
For more information, see Amazon Elastic Block Store and Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
createSnapshot
in interface AmazonEC2
createSnapshotRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateSnapshotRequest request = new CreateSnapshotRequest().withDescription("This is my root volume snapshot.").withVolumeId("vol-1234567890abcdef0"); CreateSnapshotResult response = client.createSnapshot(request);
public CreateSnapshotsResult createSnapshots(CreateSnapshotsRequest request)
Creates crash-consistent snapshots of multiple EBS volumes and stores the data in S3. Volumes are chosen by specifying an instance. Any attached volumes will produce one snapshot each that is crash-consistent across the instance. Boot volumes can be excluded by changing the parameters.
You can create multi-volume snapshots of instances in a Region and instances on an Outpost. If you create snapshots from an instance in a Region, the snapshots must be stored in the same Region as the instance. If you create snapshots from an instance on an Outpost, the snapshots can be stored on the same Outpost as the instance, or in the Region for that Outpost.
createSnapshots
in interface AmazonEC2
createSnapshotsRequest
- public CreateSpotDatafeedSubscriptionResult createSpotDatafeedSubscription(CreateSpotDatafeedSubscriptionRequest request)
Creates a data feed for Spot Instances, enabling you to view Spot Instance usage logs. You can create one data feed per AWS account. For more information, see Spot Instance data feed in the Amazon EC2 User Guide for Linux Instances.
createSpotDatafeedSubscription
in interface AmazonEC2
createSpotDatafeedSubscriptionRequest
- Contains the parameters for CreateSpotDatafeedSubscription.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateSpotDatafeedSubscriptionRequest request = new CreateSpotDatafeedSubscriptionRequest().withBucket("my-s3-bucket").withPrefix("spotdata"); CreateSpotDatafeedSubscriptionResult response = client.createSpotDatafeedSubscription(request);
public CreateSubnetResult createSubnet(CreateSubnetRequest request)
Creates a subnet in a specified VPC.
You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC.
If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.
AWS reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.
If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle.
When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available.
For more information about subnets, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
createSubnet
in interface AmazonEC2
createSubnetRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateSubnetRequest request = new CreateSubnetRequest().withCidrBlock("10.0.1.0/24").withVpcId("vpc-a01106c2"); CreateSubnetResult response = client.createSubnet(request);
public CreateTagsResult createTags(CreateTagsRequest request)
Adds or overwrites only the specified tags for the specified Amazon EC2 resource or resources. When you specify an existing tag key, the value is overwritten with the new value. Each resource can have a maximum of 50 tags. Each tag consists of a key and optional value. Tag keys must be unique per resource.
For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide. For more information about creating IAM policies that control users' access to resources based on tags, see Supported Resource-Level Permissions for Amazon EC2 API Actions in the Amazon Elastic Compute Cloud User Guide.
createTags
in interface AmazonEC2
createTagsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateTagsRequest request = new CreateTagsRequest().withResources("ami-78a54011").withTags(new Tag().withKey("Stack").withValue("production")); CreateTagsResult response = client.createTags(request);
public CreateTrafficMirrorFilterResult createTrafficMirrorFilter(CreateTrafficMirrorFilterRequest request)
Creates a Traffic Mirror filter.
A Traffic Mirror filter is a set of rules that defines the traffic to mirror.
By default, no traffic is mirrored. To mirror traffic, use CreateTrafficMirrorFilterRule to add Traffic Mirror rules to the filter. The rules you add define what traffic gets mirrored. You can also use ModifyTrafficMirrorFilterNetworkServices to mirror supported network services.
createTrafficMirrorFilter
in interface AmazonEC2
createTrafficMirrorFilterRequest
- public CreateTrafficMirrorFilterRuleResult createTrafficMirrorFilterRule(CreateTrafficMirrorFilterRuleRequest request)
Creates a Traffic Mirror filter rule.
A Traffic Mirror rule defines the Traffic Mirror source traffic to mirror.
You need the Traffic Mirror filter ID when you create the rule.
createTrafficMirrorFilterRule
in interface AmazonEC2
createTrafficMirrorFilterRuleRequest
- public CreateTrafficMirrorSessionResult createTrafficMirrorSession(CreateTrafficMirrorSessionRequest request)
Creates a Traffic Mirror session.
A Traffic Mirror session actively copies packets from a Traffic Mirror source to a Traffic Mirror target. Create a filter, and then assign it to the session to define a subset of the traffic to mirror, for example all TCP traffic.
The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) can be in the same VPC, or in a different VPC connected via VPC peering or a transit gateway.
By default, no traffic is mirrored. Use CreateTrafficMirrorFilter to create filter rules that specify the traffic to mirror.
createTrafficMirrorSession
in interface AmazonEC2
createTrafficMirrorSessionRequest
- public CreateTrafficMirrorTargetResult createTrafficMirrorTarget(CreateTrafficMirrorTargetRequest request)
Creates a target for your Traffic Mirror session.
A Traffic Mirror target is the destination for mirrored traffic. The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) can be in the same VPC, or in different VPCs connected via VPC peering or a transit gateway.
A Traffic Mirror target can be a network interface, or a Network Load Balancer.
To use the target in a Traffic Mirror session, use CreateTrafficMirrorSession.
createTrafficMirrorTarget
in interface AmazonEC2
createTrafficMirrorTargetRequest
- public CreateTransitGatewayResult createTransitGateway(CreateTransitGatewayRequest request)
Creates a transit gateway.
You can use a transit gateway to interconnect your virtual private clouds (VPC) and on-premises networks. After
the transit gateway enters the available
state, you can attach your VPCs and VPN connections to the
transit gateway.
To attach your VPCs, use CreateTransitGatewayVpcAttachment.
To attach a VPN connection, use CreateCustomerGateway to create a customer gateway and specify the ID of the customer gateway and the ID of the transit gateway in a call to CreateVpnConnection.
When you create a transit gateway, we create a default transit gateway route table and use it as the default association route table and the default propagation route table. You can use CreateTransitGatewayRouteTable to create additional transit gateway route tables. If you disable automatic route propagation, we do not create a default transit gateway route table. You can use EnableTransitGatewayRouteTablePropagation to propagate routes from a resource attachment to a transit gateway route table. If you disable automatic associations, you can use AssociateTransitGatewayRouteTable to associate a resource attachment with a transit gateway route table.
createTransitGateway
in interface AmazonEC2
createTransitGatewayRequest
- public CreateTransitGatewayConnectResult createTransitGatewayConnect(CreateTransitGatewayConnectRequest request)
Creates a Connect attachment from a specified transit gateway attachment. A Connect attachment is a GRE-based tunnel attachment that you can use to establish a connection between a transit gateway and an appliance.
A Connect attachment uses an existing VPC or AWS Direct Connect attachment as the underlying transport mechanism.
createTransitGatewayConnect
in interface AmazonEC2
createTransitGatewayConnectRequest
- public CreateTransitGatewayConnectPeerResult createTransitGatewayConnectPeer(CreateTransitGatewayConnectPeerRequest request)
Creates a Connect peer for a specified transit gateway Connect attachment between a transit gateway and an appliance.
The peer address and transit gateway address must be the same IP address family (IPv4 or IPv6).
For more information, see Connect peers in the Transit Gateways Guide.
createTransitGatewayConnectPeer
in interface AmazonEC2
createTransitGatewayConnectPeerRequest
- public CreateTransitGatewayMulticastDomainResult createTransitGatewayMulticastDomain(CreateTransitGatewayMulticastDomainRequest request)
Creates a multicast domain using the specified transit gateway.
The transit gateway must be in the available state before you create a domain. Use DescribeTransitGateways to see the state of transit gateway.
createTransitGatewayMulticastDomain
in interface AmazonEC2
createTransitGatewayMulticastDomainRequest
- public CreateTransitGatewayPeeringAttachmentResult createTransitGatewayPeeringAttachment(CreateTransitGatewayPeeringAttachmentRequest request)
Requests a transit gateway peering attachment between the specified transit gateway (requester) and a peer transit gateway (accepter). The transit gateways must be in different Regions. The peer transit gateway can be in your account or a different AWS account.
After you create the peering attachment, the owner of the accepter transit gateway must accept the attachment request.
createTransitGatewayPeeringAttachment
in interface AmazonEC2
createTransitGatewayPeeringAttachmentRequest
- public CreateTransitGatewayPrefixListReferenceResult createTransitGatewayPrefixListReference(CreateTransitGatewayPrefixListReferenceRequest request)
Creates a reference (route) to a prefix list in a specified transit gateway route table.
createTransitGatewayPrefixListReference
in interface AmazonEC2
createTransitGatewayPrefixListReferenceRequest
- public CreateTransitGatewayRouteResult createTransitGatewayRoute(CreateTransitGatewayRouteRequest request)
Creates a static route for the specified transit gateway route table.
createTransitGatewayRoute
in interface AmazonEC2
createTransitGatewayRouteRequest
- public CreateTransitGatewayRouteTableResult createTransitGatewayRouteTable(CreateTransitGatewayRouteTableRequest request)
Creates a route table for the specified transit gateway.
createTransitGatewayRouteTable
in interface AmazonEC2
createTransitGatewayRouteTableRequest
- public CreateTransitGatewayVpcAttachmentResult createTransitGatewayVpcAttachment(CreateTransitGatewayVpcAttachmentRequest request)
Attaches the specified VPC to the specified transit gateway.
If you attach a VPC with a CIDR range that overlaps the CIDR range of a VPC that is already attached, the new VPC CIDR range is not propagated to the default propagation route table.
To send VPC traffic to an attached transit gateway, add a route to the VPC route table using CreateRoute.
createTransitGatewayVpcAttachment
in interface AmazonEC2
createTransitGatewayVpcAttachmentRequest
- public CreateVolumeResult createVolume(CreateVolumeRequest request)
Creates an EBS volume that can be attached to an instance in the same Availability Zone.
You can create a new empty volume or restore a volume from an EBS snapshot. Any AWS Marketplace product codes from the snapshot are propagated to the volume.
You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
You can tag your volumes during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.
For more information, see Creating an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
createVolume
in interface AmazonEC2
createVolumeRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateVolumeRequest request = new CreateVolumeRequest().withAvailabilityZone("us-east-1a").withSize(80).withVolumeType("gp2"); CreateVolumeResult response = client.createVolume(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateVolumeRequest request = new CreateVolumeRequest().withAvailabilityZone("us-east-1a").withIops(1000).withSnapshotId("snap-066877671789bd71b") .withVolumeType("io1"); CreateVolumeResult response = client.createVolume(request);
public CreateVpcResult createVpc(CreateVpcRequest request)
Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP).
By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
createVpc
in interface AmazonEC2
createVpcRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); CreateVpcRequest request = new CreateVpcRequest().withCidrBlock("10.0.0.0/16"); CreateVpcResult response = client.createVpc(request);
public CreateVpcEndpointResult createVpcEndpoint(CreateVpcEndpointRequest request)
Creates a VPC endpoint for a specified service. An endpoint enables you to create a private connection between your VPC and the service. The service may be provided by AWS, an AWS Marketplace Partner, or another AWS account. For more information, see VPC Endpoints in the Amazon Virtual Private Cloud User Guide.
A gateway
endpoint serves as a target for a route in your route table for traffic destined for the
AWS service. You can specify an endpoint policy to attach to the endpoint, which will control access to the
service from your VPC. You can also specify the VPC route tables that use the endpoint.
An interface
endpoint is a network interface in your subnet that serves as an endpoint for
communicating with the specified service. You can specify the subnets in which to create an endpoint, and the
security groups to associate with the endpoint network interface.
A GatewayLoadBalancer
endpoint is a network interface in your subnet that serves an endpoint for
communicating with a Gateway Load Balancer that you've configured as a VPC endpoint service.
Use DescribeVpcEndpointServices to get a list of supported services.
createVpcEndpoint
in interface AmazonEC2
createVpcEndpointRequest
- Contains the parameters for CreateVpcEndpoint.public CreateVpcEndpointConnectionNotificationResult createVpcEndpointConnectionNotification(CreateVpcEndpointConnectionNotificationRequest request)
Creates a connection notification for a specified VPC endpoint or VPC endpoint service. A connection notification notifies you of specific endpoint events. You must create an SNS topic to receive notifications. For more information, see Create a Topic in the Amazon Simple Notification Service Developer Guide.
You can create a connection notification for interface endpoints only.
createVpcEndpointConnectionNotification
in interface AmazonEC2
createVpcEndpointConnectionNotificationRequest
- public CreateVpcEndpointServiceConfigurationResult createVpcEndpointServiceConfiguration(CreateVpcEndpointServiceConfigurationRequest request)
Creates a VPC endpoint service configuration to which service consumers (AWS accounts, IAM users, and IAM roles) can connect.
To create an endpoint service configuration, you must first create one of the following for your service:
A Network Load Balancer. Service consumers connect to your service using an interface endpoint.
A Gateway Load Balancer. Service consumers connect to your service using a Gateway Load Balancer endpoint.
For more information, see VPC Endpoint Services in the Amazon Virtual Private Cloud User Guide.
If you set the private DNS name, you must prove that you own the private DNS domain name. For more information, see VPC Endpoint Service Private DNS Name Verification in the Amazon Virtual Private Cloud User Guide.
createVpcEndpointServiceConfiguration
in interface AmazonEC2
createVpcEndpointServiceConfigurationRequest
- public CreateVpcPeeringConnectionResult createVpcPeeringConnection(CreateVpcPeeringConnectionRequest request)
Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another AWS account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.
Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.
The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected.
If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering
connection has a status of failed
.
createVpcPeeringConnection
in interface AmazonEC2
createVpcPeeringConnectionRequest
- public CreateVpcPeeringConnectionResult createVpcPeeringConnection()
AmazonEC2
createVpcPeeringConnection
in interface AmazonEC2
AmazonEC2.createVpcPeeringConnection(CreateVpcPeeringConnectionRequest)
public CreateVpnConnectionResult createVpnConnection(CreateVpnConnectionRequest request)
Creates a VPN connection between an existing virtual private gateway or transit gateway and a customer gateway.
The supported connection type is ipsec.1
.
The response includes information that you need to give to your network administrator to configure your customer gateway.
We strongly recommend that you use HTTPS when calling this operation because the response contains sensitive cryptographic information for configuring your customer gateway device.
If you decide to shut down your VPN connection for any reason and later create a new VPN connection, you must reconfigure your customer gateway with the new information returned from this call.
This is an idempotent operation. If you perform the operation more than once, Amazon EC2 doesn't return an error.
For more information, see AWS Site-to-Site VPN in the AWS Site-to-Site VPN User Guide.
createVpnConnection
in interface AmazonEC2
createVpnConnectionRequest
- Contains the parameters for CreateVpnConnection.public CreateVpnConnectionRouteResult createVpnConnectionRoute(CreateVpnConnectionRouteRequest request)
Creates a static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway.
For more information, see AWS Site-to-Site VPN in the AWS Site-to-Site VPN User Guide.
createVpnConnectionRoute
in interface AmazonEC2
createVpnConnectionRouteRequest
- Contains the parameters for CreateVpnConnectionRoute.public CreateVpnGatewayResult createVpnGateway(CreateVpnGatewayRequest request)
Creates a virtual private gateway. A virtual private gateway is the endpoint on the VPC side of your VPN connection. You can create a virtual private gateway before creating the VPC itself.
For more information, see AWS Site-to-Site VPN in the AWS Site-to-Site VPN User Guide.
createVpnGateway
in interface AmazonEC2
createVpnGatewayRequest
- Contains the parameters for CreateVpnGateway.public DeleteCarrierGatewayResult deleteCarrierGateway(DeleteCarrierGatewayRequest request)
Deletes a carrier gateway.
If you do not delete the route that contains the carrier gateway as the Target, the route is a blackhole route. For information about how to delete a route, see DeleteRoute.
deleteCarrierGateway
in interface AmazonEC2
deleteCarrierGatewayRequest
- public DeleteClientVpnEndpointResult deleteClientVpnEndpoint(DeleteClientVpnEndpointRequest request)
Deletes the specified Client VPN endpoint. You must disassociate all target networks before you can delete a Client VPN endpoint.
deleteClientVpnEndpoint
in interface AmazonEC2
deleteClientVpnEndpointRequest
- public DeleteClientVpnRouteResult deleteClientVpnRoute(DeleteClientVpnRouteRequest request)
Deletes a route from a Client VPN endpoint. You can only delete routes that you manually added using the CreateClientVpnRoute action. You cannot delete routes that were automatically added when associating a subnet. To remove routes that have been automatically added, disassociate the target subnet from the Client VPN endpoint.
deleteClientVpnRoute
in interface AmazonEC2
deleteClientVpnRouteRequest
- public DeleteCustomerGatewayResult deleteCustomerGateway(DeleteCustomerGatewayRequest request)
Deletes the specified customer gateway. You must delete the VPN connection before you can delete the customer gateway.
deleteCustomerGateway
in interface AmazonEC2
deleteCustomerGatewayRequest
- Contains the parameters for DeleteCustomerGateway.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteCustomerGatewayRequest request = new DeleteCustomerGatewayRequest().withCustomerGatewayId("cgw-0e11f167"); DeleteCustomerGatewayResult response = client.deleteCustomerGateway(request);
public DeleteDhcpOptionsResult deleteDhcpOptions(DeleteDhcpOptionsRequest request)
Deletes the specified set of DHCP options. You must disassociate the set of DHCP options before you can delete it. You can disassociate the set of DHCP options by associating either a new set of options or the default set of options with the VPC.
deleteDhcpOptions
in interface AmazonEC2
deleteDhcpOptionsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteDhcpOptionsRequest request = new DeleteDhcpOptionsRequest().withDhcpOptionsId("dopt-d9070ebb"); DeleteDhcpOptionsResult response = client.deleteDhcpOptions(request);
public DeleteEgressOnlyInternetGatewayResult deleteEgressOnlyInternetGateway(DeleteEgressOnlyInternetGatewayRequest request)
Deletes an egress-only internet gateway.
deleteEgressOnlyInternetGateway
in interface AmazonEC2
deleteEgressOnlyInternetGatewayRequest
- public DeleteFleetsResult deleteFleets(DeleteFleetsRequest request)
Deletes the specified EC2 Fleet.
After you delete an EC2 Fleet, it launches no new instances.
You must specify whether a deleted EC2 Fleet should also terminate its instances. If you choose to terminate the
instances, the EC2 Fleet enters the deleted_terminating
state. Otherwise, the EC2 Fleet enters the
deleted_running
state, and the instances continue to run until they are interrupted or you terminate
them manually.
For instant
fleets, EC2 Fleet must terminate the instances when the fleet is deleted. A deleted
instant
fleet with running instances is not supported.
Restrictions
You can delete up to 25 instant
fleets in a single request. If you exceed this number, no
instant
fleets are deleted and an error is returned. There is no restriction on the number of fleets
of type maintain
or request
that can be deleted in a single request.
Up to 1000 instances can be terminated in a single request to delete instant
fleets.
For more information, see Deleting an EC2 Fleet in the Amazon EC2 User Guide.
deleteFleets
in interface AmazonEC2
deleteFleetsRequest
- public DeleteFlowLogsResult deleteFlowLogs(DeleteFlowLogsRequest request)
Deletes one or more flow logs.
deleteFlowLogs
in interface AmazonEC2
deleteFlowLogsRequest
- public DeleteFpgaImageResult deleteFpgaImage(DeleteFpgaImageRequest request)
Deletes the specified Amazon FPGA Image (AFI).
deleteFpgaImage
in interface AmazonEC2
deleteFpgaImageRequest
- public DeleteInternetGatewayResult deleteInternetGateway(DeleteInternetGatewayRequest request)
Deletes the specified internet gateway. You must detach the internet gateway from the VPC before you can delete it.
deleteInternetGateway
in interface AmazonEC2
deleteInternetGatewayRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteInternetGatewayRequest request = new DeleteInternetGatewayRequest().withInternetGatewayId("igw-c0a643a9"); DeleteInternetGatewayResult response = client.deleteInternetGateway(request);
public DeleteKeyPairResult deleteKeyPair(DeleteKeyPairRequest request)
Deletes the specified key pair, by removing the public key from Amazon EC2.
deleteKeyPair
in interface AmazonEC2
deleteKeyPairRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteKeyPairRequest request = new DeleteKeyPairRequest().withKeyName("my-key-pair"); DeleteKeyPairResult response = client.deleteKeyPair(request);
public DeleteLaunchTemplateResult deleteLaunchTemplate(DeleteLaunchTemplateRequest request)
Deletes a launch template. Deleting a launch template deletes all of its versions.
deleteLaunchTemplate
in interface AmazonEC2
deleteLaunchTemplateRequest
- public DeleteLaunchTemplateVersionsResult deleteLaunchTemplateVersions(DeleteLaunchTemplateVersionsRequest request)
Deletes one or more versions of a launch template. You cannot delete the default version of a launch template; you must first assign a different version as the default. If the default version is the only version for the launch template, you must delete the entire launch template using DeleteLaunchTemplate.
deleteLaunchTemplateVersions
in interface AmazonEC2
deleteLaunchTemplateVersionsRequest
- public DeleteLocalGatewayRouteResult deleteLocalGatewayRoute(DeleteLocalGatewayRouteRequest request)
Deletes the specified route from the specified local gateway route table.
deleteLocalGatewayRoute
in interface AmazonEC2
deleteLocalGatewayRouteRequest
- public DeleteLocalGatewayRouteTableVpcAssociationResult deleteLocalGatewayRouteTableVpcAssociation(DeleteLocalGatewayRouteTableVpcAssociationRequest request)
Deletes the specified association between a VPC and local gateway route table.
deleteLocalGatewayRouteTableVpcAssociation
in interface AmazonEC2
deleteLocalGatewayRouteTableVpcAssociationRequest
- public DeleteManagedPrefixListResult deleteManagedPrefixList(DeleteManagedPrefixListRequest request)
Deletes the specified managed prefix list. You must first remove all references to the prefix list in your resources.
deleteManagedPrefixList
in interface AmazonEC2
deleteManagedPrefixListRequest
- public DeleteNatGatewayResult deleteNatGateway(DeleteNatGatewayRequest request)
Deletes the specified NAT gateway. Deleting a NAT gateway disassociates its Elastic IP address, but does not release the address from your account. Deleting a NAT gateway does not delete any NAT gateway routes in your route tables.
deleteNatGateway
in interface AmazonEC2
deleteNatGatewayRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteNatGatewayRequest request = new DeleteNatGatewayRequest().withNatGatewayId("nat-04ae55e711cec5680"); DeleteNatGatewayResult response = client.deleteNatGateway(request);
public DeleteNetworkAclResult deleteNetworkAcl(DeleteNetworkAclRequest request)
Deletes the specified network ACL. You can't delete the ACL if it's associated with any subnets. You can't delete the default network ACL.
deleteNetworkAcl
in interface AmazonEC2
deleteNetworkAclRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteNetworkAclRequest request = new DeleteNetworkAclRequest().withNetworkAclId("acl-5fb85d36"); DeleteNetworkAclResult response = client.deleteNetworkAcl(request);
public DeleteNetworkAclEntryResult deleteNetworkAclEntry(DeleteNetworkAclEntryRequest request)
Deletes the specified ingress or egress entry (rule) from the specified network ACL.
deleteNetworkAclEntry
in interface AmazonEC2
deleteNetworkAclEntryRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteNetworkAclEntryRequest request = new DeleteNetworkAclEntryRequest().withEgress(true).withNetworkAclId("acl-5fb85d36").withRuleNumber(100); DeleteNetworkAclEntryResult response = client.deleteNetworkAclEntry(request);
public DeleteNetworkInsightsAnalysisResult deleteNetworkInsightsAnalysis(DeleteNetworkInsightsAnalysisRequest request)
Deletes the specified network insights analysis.
deleteNetworkInsightsAnalysis
in interface AmazonEC2
deleteNetworkInsightsAnalysisRequest
- public DeleteNetworkInsightsPathResult deleteNetworkInsightsPath(DeleteNetworkInsightsPathRequest request)
Deletes the specified path.
deleteNetworkInsightsPath
in interface AmazonEC2
deleteNetworkInsightsPathRequest
- public DeleteNetworkInterfaceResult deleteNetworkInterface(DeleteNetworkInterfaceRequest request)
Deletes the specified network interface. You must detach the network interface before you can delete it.
deleteNetworkInterface
in interface AmazonEC2
deleteNetworkInterfaceRequest
- Contains the parameters for DeleteNetworkInterface.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteNetworkInterfaceRequest request = new DeleteNetworkInterfaceRequest().withNetworkInterfaceId("eni-e5aa89a3"); DeleteNetworkInterfaceResult response = client.deleteNetworkInterface(request);
public DeleteNetworkInterfacePermissionResult deleteNetworkInterfacePermission(DeleteNetworkInterfacePermissionRequest request)
Deletes a permission for a network interface. By default, you cannot delete the permission if the account for which you're removing the permission has attached the network interface to an instance. However, you can force delete the permission, regardless of any attachment.
deleteNetworkInterfacePermission
in interface AmazonEC2
deleteNetworkInterfacePermissionRequest
- Contains the parameters for DeleteNetworkInterfacePermission.public DeletePlacementGroupResult deletePlacementGroup(DeletePlacementGroupRequest request)
Deletes the specified placement group. You must terminate all instances in the placement group before you can delete the placement group. For more information, see Placement groups in the Amazon EC2 User Guide.
deletePlacementGroup
in interface AmazonEC2
deletePlacementGroupRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeletePlacementGroupRequest request = new DeletePlacementGroupRequest().withGroupName("my-cluster"); DeletePlacementGroupResult response = client.deletePlacementGroup(request);
public DeleteQueuedReservedInstancesResult deleteQueuedReservedInstances(DeleteQueuedReservedInstancesRequest request)
Deletes the queued purchases for the specified Reserved Instances.
deleteQueuedReservedInstances
in interface AmazonEC2
deleteQueuedReservedInstancesRequest
- public DeleteRouteResult deleteRoute(DeleteRouteRequest request)
Deletes the specified route from the specified route table.
deleteRoute
in interface AmazonEC2
deleteRouteRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteRouteRequest request = new DeleteRouteRequest().withDestinationCidrBlock("0.0.0.0/0").withRouteTableId("rtb-22574640"); DeleteRouteResult response = client.deleteRoute(request);
public DeleteRouteTableResult deleteRouteTable(DeleteRouteTableRequest request)
Deletes the specified route table. You must disassociate the route table from any subnets before you can delete it. You can't delete the main route table.
deleteRouteTable
in interface AmazonEC2
deleteRouteTableRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteRouteTableRequest request = new DeleteRouteTableRequest().withRouteTableId("rtb-22574640"); DeleteRouteTableResult response = client.deleteRouteTable(request);
public DeleteSecurityGroupResult deleteSecurityGroup(DeleteSecurityGroupRequest request)
Deletes a security group.
If you attempt to delete a security group that is associated with an instance, or is referenced by another
security group, the operation fails with InvalidGroup.InUse
in EC2-Classic or
DependencyViolation
in EC2-VPC.
deleteSecurityGroup
in interface AmazonEC2
deleteSecurityGroupRequest
- public DeleteSnapshotResult deleteSnapshot(DeleteSnapshotRequest request)
Deletes the specified snapshot.
When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume.
You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot.
For more information, see Deleting an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
deleteSnapshot
in interface AmazonEC2
deleteSnapshotRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteSnapshotRequest request = new DeleteSnapshotRequest().withSnapshotId("snap-1234567890abcdef0"); DeleteSnapshotResult response = client.deleteSnapshot(request);
public DeleteSpotDatafeedSubscriptionResult deleteSpotDatafeedSubscription(DeleteSpotDatafeedSubscriptionRequest request)
Deletes the data feed for Spot Instances.
deleteSpotDatafeedSubscription
in interface AmazonEC2
deleteSpotDatafeedSubscriptionRequest
- Contains the parameters for DeleteSpotDatafeedSubscription.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteSpotDatafeedSubscriptionRequest request = new DeleteSpotDatafeedSubscriptionRequest(); DeleteSpotDatafeedSubscriptionResult response = client.deleteSpotDatafeedSubscription(request);
public DeleteSpotDatafeedSubscriptionResult deleteSpotDatafeedSubscription()
AmazonEC2
deleteSpotDatafeedSubscription
in interface AmazonEC2
AmazonEC2.deleteSpotDatafeedSubscription(DeleteSpotDatafeedSubscriptionRequest)
public DeleteSubnetResult deleteSubnet(DeleteSubnetRequest request)
Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.
deleteSubnet
in interface AmazonEC2
deleteSubnetRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteSubnetRequest request = new DeleteSubnetRequest().withSubnetId("subnet-9d4a7b6c"); DeleteSubnetResult response = client.deleteSubnet(request);
public DeleteTagsResult deleteTags(DeleteTagsRequest request)
Deletes the specified set of tags from the specified set of resources.
To list the current tags, use DescribeTags. For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide.
deleteTags
in interface AmazonEC2
deleteTagsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteTagsRequest request = new DeleteTagsRequest().withResources("ami-78a54011").withTags(new Tag().withKey("Stack").withValue("test")); DeleteTagsResult response = client.deleteTags(request);
public DeleteTrafficMirrorFilterResult deleteTrafficMirrorFilter(DeleteTrafficMirrorFilterRequest request)
Deletes the specified Traffic Mirror filter.
You cannot delete a Traffic Mirror filter that is in use by a Traffic Mirror session.
deleteTrafficMirrorFilter
in interface AmazonEC2
deleteTrafficMirrorFilterRequest
- public DeleteTrafficMirrorFilterRuleResult deleteTrafficMirrorFilterRule(DeleteTrafficMirrorFilterRuleRequest request)
Deletes the specified Traffic Mirror rule.
deleteTrafficMirrorFilterRule
in interface AmazonEC2
deleteTrafficMirrorFilterRuleRequest
- public DeleteTrafficMirrorSessionResult deleteTrafficMirrorSession(DeleteTrafficMirrorSessionRequest request)
Deletes the specified Traffic Mirror session.
deleteTrafficMirrorSession
in interface AmazonEC2
deleteTrafficMirrorSessionRequest
- public DeleteTrafficMirrorTargetResult deleteTrafficMirrorTarget(DeleteTrafficMirrorTargetRequest request)
Deletes the specified Traffic Mirror target.
You cannot delete a Traffic Mirror target that is in use by a Traffic Mirror session.
deleteTrafficMirrorTarget
in interface AmazonEC2
deleteTrafficMirrorTargetRequest
- public DeleteTransitGatewayResult deleteTransitGateway(DeleteTransitGatewayRequest request)
Deletes the specified transit gateway.
deleteTransitGateway
in interface AmazonEC2
deleteTransitGatewayRequest
- public DeleteTransitGatewayConnectResult deleteTransitGatewayConnect(DeleteTransitGatewayConnectRequest request)
Deletes the specified Connect attachment. You must first delete any Connect peers for the attachment.
deleteTransitGatewayConnect
in interface AmazonEC2
deleteTransitGatewayConnectRequest
- public DeleteTransitGatewayConnectPeerResult deleteTransitGatewayConnectPeer(DeleteTransitGatewayConnectPeerRequest request)
Deletes the specified Connect peer.
deleteTransitGatewayConnectPeer
in interface AmazonEC2
deleteTransitGatewayConnectPeerRequest
- public DeleteTransitGatewayMulticastDomainResult deleteTransitGatewayMulticastDomain(DeleteTransitGatewayMulticastDomainRequest request)
Deletes the specified transit gateway multicast domain.
deleteTransitGatewayMulticastDomain
in interface AmazonEC2
deleteTransitGatewayMulticastDomainRequest
- public DeleteTransitGatewayPeeringAttachmentResult deleteTransitGatewayPeeringAttachment(DeleteTransitGatewayPeeringAttachmentRequest request)
Deletes a transit gateway peering attachment.
deleteTransitGatewayPeeringAttachment
in interface AmazonEC2
deleteTransitGatewayPeeringAttachmentRequest
- public DeleteTransitGatewayPrefixListReferenceResult deleteTransitGatewayPrefixListReference(DeleteTransitGatewayPrefixListReferenceRequest request)
Deletes a reference (route) to a prefix list in a specified transit gateway route table.
deleteTransitGatewayPrefixListReference
in interface AmazonEC2
deleteTransitGatewayPrefixListReferenceRequest
- public DeleteTransitGatewayRouteResult deleteTransitGatewayRoute(DeleteTransitGatewayRouteRequest request)
Deletes the specified route from the specified transit gateway route table.
deleteTransitGatewayRoute
in interface AmazonEC2
deleteTransitGatewayRouteRequest
- public DeleteTransitGatewayRouteTableResult deleteTransitGatewayRouteTable(DeleteTransitGatewayRouteTableRequest request)
Deletes the specified transit gateway route table. You must disassociate the route table from any transit gateway route tables before you can delete it.
deleteTransitGatewayRouteTable
in interface AmazonEC2
deleteTransitGatewayRouteTableRequest
- public DeleteTransitGatewayVpcAttachmentResult deleteTransitGatewayVpcAttachment(DeleteTransitGatewayVpcAttachmentRequest request)
Deletes the specified VPC attachment.
deleteTransitGatewayVpcAttachment
in interface AmazonEC2
deleteTransitGatewayVpcAttachmentRequest
- public DeleteVolumeResult deleteVolume(DeleteVolumeRequest request)
Deletes the specified EBS volume. The volume must be in the available
state (not attached to an
instance).
The volume can remain in the deleting
state for several minutes.
For more information, see Deleting an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
deleteVolume
in interface AmazonEC2
deleteVolumeRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteVolumeRequest request = new DeleteVolumeRequest().withVolumeId("vol-049df61146c4d7901"); DeleteVolumeResult response = client.deleteVolume(request);
public DeleteVpcResult deleteVpc(DeleteVpcRequest request)
Deletes the specified VPC. You must detach or delete all gateways and resources that are associated with the VPC before you can delete it. For example, you must terminate all instances running in the VPC, delete all security groups associated with the VPC (except the default one), delete all route tables associated with the VPC (except the default one), and so on.
deleteVpc
in interface AmazonEC2
deleteVpcRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DeleteVpcRequest request = new DeleteVpcRequest().withVpcId("vpc-a01106c2"); DeleteVpcResult response = client.deleteVpc(request);
public DeleteVpcEndpointConnectionNotificationsResult deleteVpcEndpointConnectionNotifications(DeleteVpcEndpointConnectionNotificationsRequest request)
Deletes one or more VPC endpoint connection notifications.
deleteVpcEndpointConnectionNotifications
in interface AmazonEC2
deleteVpcEndpointConnectionNotificationsRequest
- public DeleteVpcEndpointServiceConfigurationsResult deleteVpcEndpointServiceConfigurations(DeleteVpcEndpointServiceConfigurationsRequest request)
Deletes one or more VPC endpoint service configurations in your account. Before you delete the endpoint service
configuration, you must reject any Available
or PendingAcceptance
interface endpoint
connections that are attached to the service.
deleteVpcEndpointServiceConfigurations
in interface AmazonEC2
deleteVpcEndpointServiceConfigurationsRequest
- public DeleteVpcEndpointsResult deleteVpcEndpoints(DeleteVpcEndpointsRequest request)
Deletes one or more specified VPC endpoints. You can delete any of the following types of VPC endpoints.
Gateway endpoint,
Gateway Load Balancer endpoint,
Interface endpoint
The following rules apply when you delete a VPC endpoint:
When you delete a gateway endpoint, we delete the endpoint routes in the route tables that are associated with the endpoint.
When you delete a Gateway Load Balancer endpoint, we delete the endpoint network interfaces.
You can only delete Gateway Load Balancer endpoints when the routes that are associated with the endpoint are deleted.
When you delete an interface endpoint, we delete the endpoint network interfaces.
deleteVpcEndpoints
in interface AmazonEC2
deleteVpcEndpointsRequest
- Contains the parameters for DeleteVpcEndpoints.public DeleteVpcPeeringConnectionResult deleteVpcPeeringConnection(DeleteVpcPeeringConnectionRequest request)
Deletes a VPC peering connection. Either the owner of the requester VPC or the owner of the accepter VPC can
delete the VPC peering connection if it's in the active
state. The owner of the requester VPC can
delete a VPC peering connection in the pending-acceptance
state. You cannot delete a VPC peering
connection that's in the failed
state.
deleteVpcPeeringConnection
in interface AmazonEC2
deleteVpcPeeringConnectionRequest
- public DeleteVpnConnectionResult deleteVpnConnection(DeleteVpnConnectionRequest request)
Deletes the specified VPN connection.
If you're deleting the VPC and its associated components, we recommend that you detach the virtual private gateway from the VPC and delete the VPC before deleting the VPN connection. If you believe that the tunnel credentials for your VPN connection have been compromised, you can delete the VPN connection and create a new one that has new keys, without needing to delete the VPC or virtual private gateway. If you create a new VPN connection, you must reconfigure the customer gateway device using the new configuration information returned with the new VPN connection ID.
For certificate-based authentication, delete all AWS Certificate Manager (ACM) private certificates used for the AWS-side tunnel endpoints for the VPN connection before deleting the VPN connection.
deleteVpnConnection
in interface AmazonEC2
deleteVpnConnectionRequest
- Contains the parameters for DeleteVpnConnection.public DeleteVpnConnectionRouteResult deleteVpnConnectionRoute(DeleteVpnConnectionRouteRequest request)
Deletes the specified static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway.
deleteVpnConnectionRoute
in interface AmazonEC2
deleteVpnConnectionRouteRequest
- Contains the parameters for DeleteVpnConnectionRoute.public DeleteVpnGatewayResult deleteVpnGateway(DeleteVpnGatewayRequest request)
Deletes the specified virtual private gateway. You must first detach the virtual private gateway from the VPC. Note that you don't need to delete the virtual private gateway if you plan to delete and recreate the VPN connection between your VPC and your network.
deleteVpnGateway
in interface AmazonEC2
deleteVpnGatewayRequest
- Contains the parameters for DeleteVpnGateway.public DeprovisionByoipCidrResult deprovisionByoipCidr(DeprovisionByoipCidrRequest request)
Releases the specified address range that you provisioned for use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.
Before you can release an address range, you must stop advertising it using WithdrawByoipCidr and you must not have any IP addresses allocated from its address range.
deprovisionByoipCidr
in interface AmazonEC2
deprovisionByoipCidrRequest
- public DeregisterImageResult deregisterImage(DeregisterImageRequest request)
Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances; however, it doesn't affect any instances that you've already launched from the AMI. You'll continue to incur usage costs for those instances until you terminate them.
When you deregister an Amazon EBS-backed AMI, it doesn't affect the snapshot that was created for the root volume of the instance during the AMI creation process. When you deregister an instance store-backed AMI, it doesn't affect the files that you uploaded to Amazon S3 when you created the AMI.
deregisterImage
in interface AmazonEC2
deregisterImageRequest
- Contains the parameters for DeregisterImage.public DeregisterInstanceEventNotificationAttributesResult deregisterInstanceEventNotificationAttributes(DeregisterInstanceEventNotificationAttributesRequest request)
Deregisters tag keys to prevent tags that have the specified tag keys from being included in scheduled event notifications for resources in the Region.
deregisterInstanceEventNotificationAttributes
in interface AmazonEC2
deregisterInstanceEventNotificationAttributesRequest
- public DeregisterTransitGatewayMulticastGroupMembersResult deregisterTransitGatewayMulticastGroupMembers(DeregisterTransitGatewayMulticastGroupMembersRequest request)
Deregisters the specified members (network interfaces) from the transit gateway multicast group.
deregisterTransitGatewayMulticastGroupMembers
in interface AmazonEC2
deregisterTransitGatewayMulticastGroupMembersRequest
- public DeregisterTransitGatewayMulticastGroupSourcesResult deregisterTransitGatewayMulticastGroupSources(DeregisterTransitGatewayMulticastGroupSourcesRequest request)
Deregisters the specified sources (network interfaces) from the transit gateway multicast group.
deregisterTransitGatewayMulticastGroupSources
in interface AmazonEC2
deregisterTransitGatewayMulticastGroupSourcesRequest
- public DescribeAccountAttributesResult describeAccountAttributes(DescribeAccountAttributesRequest request)
Describes attributes of your AWS account. The following are the supported account attributes:
supported-platforms
: Indicates whether your account can launch instances into EC2-Classic and
EC2-VPC, or only into EC2-VPC.
default-vpc
: The ID of the default VPC for your account, or none
.
max-instances
: This attribute is no longer supported. The returned value does not reflect your
actual vCPU limit for running On-Demand Instances. For more information, see On-Demand Instance Limits in the Amazon Elastic Compute Cloud User Guide.
vpc-max-security-groups-per-interface
: The maximum number of security groups that you can assign to
a network interface.
max-elastic-ips
: The maximum number of Elastic IP addresses that you can allocate for use with
EC2-Classic.
vpc-max-elastic-ips
: The maximum number of Elastic IP addresses that you can allocate for use with
EC2-VPC.
describeAccountAttributes
in interface AmazonEC2
describeAccountAttributesRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeAccountAttributesRequest request = new DescribeAccountAttributesRequest().withAttributeNames("supported-platforms"); DescribeAccountAttributesResult response = client.describeAccountAttributes(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeAccountAttributesRequest request = new DescribeAccountAttributesRequest(); DescribeAccountAttributesResult response = client.describeAccountAttributes(request);
public DescribeAccountAttributesResult describeAccountAttributes()
AmazonEC2
describeAccountAttributes
in interface AmazonEC2
AmazonEC2.describeAccountAttributes(DescribeAccountAttributesRequest)
public DescribeAddressesResult describeAddresses(DescribeAddressesRequest request)
Describes the specified Elastic IP addresses or all of your Elastic IP addresses.
An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide.
describeAddresses
in interface AmazonEC2
describeAddressesRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeAddressesRequest request = new DescribeAddressesRequest(); DescribeAddressesResult response = client.describeAddresses(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeAddressesRequest request = new DescribeAddressesRequest().withFilters(new Filter().withName("domain").withValues("vpc")); DescribeAddressesResult response = client.describeAddresses(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeAddressesRequest request = new DescribeAddressesRequest().withFilters(new Filter().withName("domain").withValues("standard")); DescribeAddressesResult response = client.describeAddresses(request);
public DescribeAddressesResult describeAddresses()
AmazonEC2
describeAddresses
in interface AmazonEC2
AmazonEC2.describeAddresses(DescribeAddressesRequest)
public DescribeAddressesAttributeResult describeAddressesAttribute(DescribeAddressesAttributeRequest request)
Describes the attributes of the specified Elastic IP addresses. For requirements, see Using reverse DNS for email applications.
describeAddressesAttribute
in interface AmazonEC2
describeAddressesAttributeRequest
- public DescribeAggregateIdFormatResult describeAggregateIdFormat(DescribeAggregateIdFormatRequest request)
Describes the longer ID format settings for all resource types in a specific Region. This request is useful for performing a quick audit to determine whether a specific Region is fully opted in for longer IDs (17-character IDs).
This request only returns information about resource types that support longer IDs.
The following resource types support longer IDs: bundle
| conversion-task
|
customer-gateway
| dhcp-options
| elastic-ip-allocation
|
elastic-ip-association
| export-task
| flow-log
| image
|
import-task
| instance
| internet-gateway
| network-acl
|
network-acl-association
| network-interface
| network-interface-attachment
| prefix-list
| reservation
| route-table
|
route-table-association
| security-group
| snapshot
| subnet
| subnet-cidr-block-association
| volume
| vpc
|
vpc-cidr-block-association
| vpc-endpoint
| vpc-peering-connection
|
vpn-connection
| vpn-gateway
.
describeAggregateIdFormat
in interface AmazonEC2
describeAggregateIdFormatRequest
- public DescribeAvailabilityZonesResult describeAvailabilityZones(DescribeAvailabilityZonesRequest request)
Describes the Availability Zones, Local Zones, and Wavelength Zones that are available to you. If there is an event impacting a zone, you can use this request to view the state and any provided messages for that zone.
For more information about Availability Zones, Local Zones, and Wavelength Zones, see Regions, Zones and Outposts in the Amazon Elastic Compute Cloud User Guide.
describeAvailabilityZones
in interface AmazonEC2
describeAvailabilityZonesRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeAvailabilityZonesRequest request = new DescribeAvailabilityZonesRequest(); DescribeAvailabilityZonesResult response = client.describeAvailabilityZones(request);
public DescribeAvailabilityZonesResult describeAvailabilityZones()
AmazonEC2
describeAvailabilityZones
in interface AmazonEC2
AmazonEC2.describeAvailabilityZones(DescribeAvailabilityZonesRequest)
public DescribeBundleTasksResult describeBundleTasks(DescribeBundleTasksRequest request)
Describes the specified bundle tasks or all of your bundle tasks.
Completed bundle tasks are listed for only a limited time. If your bundle task is no longer in the list, you can
still register an AMI from it. Just use RegisterImage
with the Amazon S3 bucket name and image
manifest name you provided to the bundle task.
describeBundleTasks
in interface AmazonEC2
describeBundleTasksRequest
- public DescribeBundleTasksResult describeBundleTasks()
AmazonEC2
describeBundleTasks
in interface AmazonEC2
AmazonEC2.describeBundleTasks(DescribeBundleTasksRequest)
public DescribeByoipCidrsResult describeByoipCidrs(DescribeByoipCidrsRequest request)
Describes the IP address ranges that were specified in calls to ProvisionByoipCidr.
To describe the address pools that were created when you provisioned the address ranges, use DescribePublicIpv4Pools or DescribeIpv6Pools.
describeByoipCidrs
in interface AmazonEC2
describeByoipCidrsRequest
- public DescribeCapacityReservationsResult describeCapacityReservations(DescribeCapacityReservationsRequest request)
Describes one or more of your Capacity Reservations. The results describe only the Capacity Reservations in the AWS Region that you're currently using.
describeCapacityReservations
in interface AmazonEC2
describeCapacityReservationsRequest
- public DescribeCarrierGatewaysResult describeCarrierGateways(DescribeCarrierGatewaysRequest request)
Describes one or more of your carrier gateways.
describeCarrierGateways
in interface AmazonEC2
describeCarrierGatewaysRequest
- public DescribeClassicLinkInstancesResult describeClassicLinkInstances(DescribeClassicLinkInstancesRequest request)
Describes one or more of your linked EC2-Classic instances. This request only returns information about EC2-Classic instances linked to a VPC through ClassicLink. You cannot use this request to return information about other instances.
describeClassicLinkInstances
in interface AmazonEC2
describeClassicLinkInstancesRequest
- public DescribeClassicLinkInstancesResult describeClassicLinkInstances()
AmazonEC2
describeClassicLinkInstances
in interface AmazonEC2
AmazonEC2.describeClassicLinkInstances(DescribeClassicLinkInstancesRequest)
public DescribeClientVpnAuthorizationRulesResult describeClientVpnAuthorizationRules(DescribeClientVpnAuthorizationRulesRequest request)
Describes the authorization rules for a specified Client VPN endpoint.
describeClientVpnAuthorizationRules
in interface AmazonEC2
describeClientVpnAuthorizationRulesRequest
- public DescribeClientVpnConnectionsResult describeClientVpnConnections(DescribeClientVpnConnectionsRequest request)
Describes active client connections and connections that have been terminated within the last 60 minutes for the specified Client VPN endpoint.
describeClientVpnConnections
in interface AmazonEC2
describeClientVpnConnectionsRequest
- public DescribeClientVpnEndpointsResult describeClientVpnEndpoints(DescribeClientVpnEndpointsRequest request)
Describes one or more Client VPN endpoints in the account.
describeClientVpnEndpoints
in interface AmazonEC2
describeClientVpnEndpointsRequest
- public DescribeClientVpnRoutesResult describeClientVpnRoutes(DescribeClientVpnRoutesRequest request)
Describes the routes for the specified Client VPN endpoint.
describeClientVpnRoutes
in interface AmazonEC2
describeClientVpnRoutesRequest
- public DescribeClientVpnTargetNetworksResult describeClientVpnTargetNetworks(DescribeClientVpnTargetNetworksRequest request)
Describes the target networks associated with the specified Client VPN endpoint.
describeClientVpnTargetNetworks
in interface AmazonEC2
describeClientVpnTargetNetworksRequest
- public DescribeCoipPoolsResult describeCoipPools(DescribeCoipPoolsRequest request)
Describes the specified customer-owned address pools or all of your customer-owned address pools.
describeCoipPools
in interface AmazonEC2
describeCoipPoolsRequest
- public DescribeConversionTasksResult describeConversionTasks(DescribeConversionTasksRequest request)
Describes the specified conversion tasks or all your conversion tasks. For more information, see the VM Import/Export User Guide.
For information about the import manifest referenced by this API action, see VM Import Manifest.
describeConversionTasks
in interface AmazonEC2
describeConversionTasksRequest
- public DescribeConversionTasksResult describeConversionTasks()
AmazonEC2
describeConversionTasks
in interface AmazonEC2
AmazonEC2.describeConversionTasks(DescribeConversionTasksRequest)
public DescribeCustomerGatewaysResult describeCustomerGateways(DescribeCustomerGatewaysRequest request)
Describes one or more of your VPN customer gateways.
For more information, see AWS Site-to-Site VPN in the AWS Site-to-Site VPN User Guide.
describeCustomerGateways
in interface AmazonEC2
describeCustomerGatewaysRequest
- Contains the parameters for DescribeCustomerGateways.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeCustomerGatewaysRequest request = new DescribeCustomerGatewaysRequest().withCustomerGatewayIds("cgw-0e11f167"); DescribeCustomerGatewaysResult response = client.describeCustomerGateways(request);
public DescribeCustomerGatewaysResult describeCustomerGateways()
AmazonEC2
describeCustomerGateways
in interface AmazonEC2
AmazonEC2.describeCustomerGateways(DescribeCustomerGatewaysRequest)
public DescribeDhcpOptionsResult describeDhcpOptions(DescribeDhcpOptionsRequest request)
Describes one or more of your DHCP options sets.
For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
describeDhcpOptions
in interface AmazonEC2
describeDhcpOptionsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeDhcpOptionsRequest request = new DescribeDhcpOptionsRequest().withDhcpOptionsIds("dopt-d9070ebb"); DescribeDhcpOptionsResult response = client.describeDhcpOptions(request);
public DescribeDhcpOptionsResult describeDhcpOptions()
AmazonEC2
describeDhcpOptions
in interface AmazonEC2
AmazonEC2.describeDhcpOptions(DescribeDhcpOptionsRequest)
public DescribeEgressOnlyInternetGatewaysResult describeEgressOnlyInternetGateways(DescribeEgressOnlyInternetGatewaysRequest request)
Describes one or more of your egress-only internet gateways.
describeEgressOnlyInternetGateways
in interface AmazonEC2
describeEgressOnlyInternetGatewaysRequest
- public DescribeElasticGpusResult describeElasticGpus(DescribeElasticGpusRequest request)
Describes the Elastic Graphics accelerator associated with your instances. For more information about Elastic Graphics, see Amazon Elastic Graphics.
describeElasticGpus
in interface AmazonEC2
describeElasticGpusRequest
- public DescribeExportImageTasksResult describeExportImageTasks(DescribeExportImageTasksRequest request)
Describes the specified export image tasks or all of your export image tasks.
describeExportImageTasks
in interface AmazonEC2
describeExportImageTasksRequest
- public DescribeExportTasksResult describeExportTasks(DescribeExportTasksRequest request)
Describes the specified export instance tasks or all of your export instance tasks.
describeExportTasks
in interface AmazonEC2
describeExportTasksRequest
- public DescribeExportTasksResult describeExportTasks()
AmazonEC2
describeExportTasks
in interface AmazonEC2
AmazonEC2.describeExportTasks(DescribeExportTasksRequest)
public DescribeFastSnapshotRestoresResult describeFastSnapshotRestores(DescribeFastSnapshotRestoresRequest request)
Describes the state of fast snapshot restores for your snapshots.
describeFastSnapshotRestores
in interface AmazonEC2
describeFastSnapshotRestoresRequest
- public DescribeFleetHistoryResult describeFleetHistory(DescribeFleetHistoryRequest request)
Describes the events for the specified EC2 Fleet during the specified time.
EC2 Fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query by the last evaluated time and not miss a recorded event. EC2 Fleet events are available for 48 hours.
For more information, see Monitoring your EC2 Fleet in the Amazon EC2 User Guide.
describeFleetHistory
in interface AmazonEC2
describeFleetHistoryRequest
- public DescribeFleetInstancesResult describeFleetInstances(DescribeFleetInstancesRequest request)
Describes the running instances for the specified EC2 Fleet.
For more information, see Monitoring your EC2 Fleet in the Amazon EC2 User Guide.
describeFleetInstances
in interface AmazonEC2
describeFleetInstancesRequest
- public DescribeFleetsResult describeFleets(DescribeFleetsRequest request)
Describes the specified EC2 Fleets or all of your EC2 Fleets.
For more information, see Monitoring your EC2 Fleet in the Amazon EC2 User Guide.
describeFleets
in interface AmazonEC2
describeFleetsRequest
- public DescribeFlowLogsResult describeFlowLogs(DescribeFlowLogsRequest request)
Describes one or more flow logs. To view the information in your flow logs (the log streams for the network interfaces), you must use the CloudWatch Logs console or the CloudWatch Logs API.
describeFlowLogs
in interface AmazonEC2
describeFlowLogsRequest
- public DescribeFlowLogsResult describeFlowLogs()
AmazonEC2
describeFlowLogs
in interface AmazonEC2
AmazonEC2.describeFlowLogs(DescribeFlowLogsRequest)
public DescribeFpgaImageAttributeResult describeFpgaImageAttribute(DescribeFpgaImageAttributeRequest request)
Describes the specified attribute of the specified Amazon FPGA Image (AFI).
describeFpgaImageAttribute
in interface AmazonEC2
describeFpgaImageAttributeRequest
- public DescribeFpgaImagesResult describeFpgaImages(DescribeFpgaImagesRequest request)
Describes the Amazon FPGA Images (AFIs) available to you. These include public AFIs, private AFIs that you own, and AFIs owned by other AWS accounts for which you have load permissions.
describeFpgaImages
in interface AmazonEC2
describeFpgaImagesRequest
- public DescribeHostReservationOfferingsResult describeHostReservationOfferings(DescribeHostReservationOfferingsRequest request)
Describes the Dedicated Host reservations that are available to purchase.
The results describe all of the Dedicated Host reservation offerings, including offerings that might not match the instance family and Region of your Dedicated Hosts. When purchasing an offering, ensure that the instance family and Region of the offering matches that of the Dedicated Hosts with which it is to be associated. For more information about supported instance types, see Dedicated Hosts in the Amazon EC2 User Guide.
describeHostReservationOfferings
in interface AmazonEC2
describeHostReservationOfferingsRequest
- public DescribeHostReservationsResult describeHostReservations(DescribeHostReservationsRequest request)
Describes reservations that are associated with Dedicated Hosts in your account.
describeHostReservations
in interface AmazonEC2
describeHostReservationsRequest
- public DescribeHostsResult describeHosts(DescribeHostsRequest request)
Describes the specified Dedicated Hosts or all your Dedicated Hosts.
The results describe only the Dedicated Hosts in the Region you're currently using. All listed instances consume
capacity on your Dedicated Host. Dedicated Hosts that have recently been released are listed with the state
released
.
describeHosts
in interface AmazonEC2
describeHostsRequest
- public DescribeHostsResult describeHosts()
AmazonEC2
describeHosts
in interface AmazonEC2
AmazonEC2.describeHosts(DescribeHostsRequest)
public DescribeIamInstanceProfileAssociationsResult describeIamInstanceProfileAssociations(DescribeIamInstanceProfileAssociationsRequest request)
Describes your IAM instance profile associations.
describeIamInstanceProfileAssociations
in interface AmazonEC2
describeIamInstanceProfileAssociationsRequest
- public DescribeIdFormatResult describeIdFormat(DescribeIdFormatRequest request)
Describes the ID format settings for your resources on a per-Region basis, for example, to view which resource types are enabled for longer IDs. This request only returns information about resource types whose ID formats can be modified; it does not return information about other resource types.
The following resource types support longer IDs: bundle
| conversion-task
|
customer-gateway
| dhcp-options
| elastic-ip-allocation
|
elastic-ip-association
| export-task
| flow-log
| image
|
import-task
| instance
| internet-gateway
| network-acl
|
network-acl-association
| network-interface
| network-interface-attachment
| prefix-list
| reservation
| route-table
|
route-table-association
| security-group
| snapshot
| subnet
| subnet-cidr-block-association
| volume
| vpc
|
vpc-cidr-block-association
| vpc-endpoint
| vpc-peering-connection
|
vpn-connection
| vpn-gateway
.
These settings apply to the IAM user who makes the request; they do not apply to the entire AWS account. By
default, an IAM user defaults to the same settings as the root user, unless they explicitly override the settings
by running the ModifyIdFormat command. Resources created with longer IDs are visible to all IAM users,
regardless of these settings and provided that they have permission to use the relevant Describe
command for the resource type.
describeIdFormat
in interface AmazonEC2
describeIdFormatRequest
- public DescribeIdFormatResult describeIdFormat()
AmazonEC2
describeIdFormat
in interface AmazonEC2
AmazonEC2.describeIdFormat(DescribeIdFormatRequest)
public DescribeIdentityIdFormatResult describeIdentityIdFormat(DescribeIdentityIdFormatRequest request)
Describes the ID format settings for resources for the specified IAM user, IAM role, or root user. For example, you can view the resource types that are enabled for longer IDs. This request only returns information about resource types whose ID formats can be modified; it does not return information about other resource types. For more information, see Resource IDs in the Amazon Elastic Compute Cloud User Guide.
The following resource types support longer IDs: bundle
| conversion-task
|
customer-gateway
| dhcp-options
| elastic-ip-allocation
|
elastic-ip-association
| export-task
| flow-log
| image
|
import-task
| instance
| internet-gateway
| network-acl
|
network-acl-association
| network-interface
| network-interface-attachment
| prefix-list
| reservation
| route-table
|
route-table-association
| security-group
| snapshot
| subnet
| subnet-cidr-block-association
| volume
| vpc
|
vpc-cidr-block-association
| vpc-endpoint
| vpc-peering-connection
|
vpn-connection
| vpn-gateway
.
These settings apply to the principal specified in the request. They do not apply to the principal that makes the request.
describeIdentityIdFormat
in interface AmazonEC2
describeIdentityIdFormatRequest
- public DescribeImageAttributeResult describeImageAttribute(DescribeImageAttributeRequest request)
Describes the specified attribute of the specified AMI. You can specify only one attribute at a time.
describeImageAttribute
in interface AmazonEC2
describeImageAttributeRequest
- Contains the parameters for DescribeImageAttribute.public DescribeImagesResult describeImages(DescribeImagesRequest request)
Describes the specified images (AMIs, AKIs, and ARIs) available to you or all of the images available to you.
The images available to you include public images, private images that you own, and private images owned by other AWS accounts for which you have explicit launch permissions.
Recently deregistered images appear in the returned results for a short interval and then return empty results. After all instances that reference a deregistered AMI are terminated, specifying the ID of the image results in an error indicating that the AMI ID cannot be found.
describeImages
in interface AmazonEC2
describeImagesRequest
- public DescribeImagesResult describeImages()
AmazonEC2
describeImages
in interface AmazonEC2
AmazonEC2.describeImages(DescribeImagesRequest)
public DescribeImportImageTasksResult describeImportImageTasks(DescribeImportImageTasksRequest request)
Displays details about an import virtual machine or import snapshot tasks that are already created.
describeImportImageTasks
in interface AmazonEC2
describeImportImageTasksRequest
- public DescribeImportImageTasksResult describeImportImageTasks()
AmazonEC2
describeImportImageTasks
in interface AmazonEC2
AmazonEC2.describeImportImageTasks(DescribeImportImageTasksRequest)
public DescribeImportSnapshotTasksResult describeImportSnapshotTasks(DescribeImportSnapshotTasksRequest request)
Describes your import snapshot tasks.
describeImportSnapshotTasks
in interface AmazonEC2
describeImportSnapshotTasksRequest
- public DescribeImportSnapshotTasksResult describeImportSnapshotTasks()
AmazonEC2
describeImportSnapshotTasks
in interface AmazonEC2
AmazonEC2.describeImportSnapshotTasks(DescribeImportSnapshotTasksRequest)
public DescribeInstanceAttributeResult describeInstanceAttribute(DescribeInstanceAttributeRequest request)
Describes the specified attribute of the specified instance. You can specify only one attribute at a time. Valid
attribute values are: instanceType
| kernel
| ramdisk
|
userData
| disableApiTermination
| instanceInitiatedShutdownBehavior
|
rootDeviceName
| blockDeviceMapping
| productCodes
|
sourceDestCheck
| groupSet
| ebsOptimized
| sriovNetSupport
describeInstanceAttribute
in interface AmazonEC2
describeInstanceAttributeRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeInstanceAttributeRequest request = new DescribeInstanceAttributeRequest().withAttribute("instanceType").withInstanceId("i-1234567890abcdef0"); DescribeInstanceAttributeResult response = client.describeInstanceAttribute(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeInstanceAttributeRequest request = new DescribeInstanceAttributeRequest().withAttribute("disableApiTermination").withInstanceId( "i-1234567890abcdef0"); DescribeInstanceAttributeResult response = client.describeInstanceAttribute(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeInstanceAttributeRequest request = new DescribeInstanceAttributeRequest().withAttribute("blockDeviceMapping").withInstanceId( "i-1234567890abcdef0"); DescribeInstanceAttributeResult response = client.describeInstanceAttribute(request);
public DescribeInstanceCreditSpecificationsResult describeInstanceCreditSpecifications(DescribeInstanceCreditSpecificationsRequest request)
Describes the credit option for CPU usage of the specified burstable performance instances. The credit options
are standard
and unlimited
.
If you do not specify an instance ID, Amazon EC2 returns burstable performance instances with the
unlimited
credit option, as well as instances that were previously configured as T2, T3, and T3a
with the unlimited
credit option. For example, if you resize a T2 instance, while it is configured
as unlimited
, to an M4 instance, Amazon EC2 returns the M4 instance.
If you specify one or more instance IDs, Amazon EC2 returns the credit option (standard
or
unlimited
) of those instances. If you specify an instance ID that is not valid, such as an instance
that is not a burstable performance instance, an error is returned.
Recently terminated instances might appear in the returned results. This interval is usually less than one hour.
If an Availability Zone is experiencing a service disruption and you specify instance IDs in the affected zone, or do not specify any instance IDs at all, the call fails. If you specify only instance IDs in an unaffected zone, the call works normally.
For more information, see Burstable performance instances in the Amazon EC2 User Guide.
describeInstanceCreditSpecifications
in interface AmazonEC2
describeInstanceCreditSpecificationsRequest
- public DescribeInstanceEventNotificationAttributesResult describeInstanceEventNotificationAttributes(DescribeInstanceEventNotificationAttributesRequest request)
Describes the tag keys that are registered to appear in scheduled event notifications for resources in the current Region.
describeInstanceEventNotificationAttributes
in interface AmazonEC2
describeInstanceEventNotificationAttributesRequest
- public DescribeInstanceStatusResult describeInstanceStatus(DescribeInstanceStatusRequest request)
Describes the status of the specified instances or all of your instances. By default, only running instances are described, unless you specifically indicate to return the status of all instances.
Instance status includes the following components:
Status checks - Amazon EC2 performs status checks on running EC2 instances to identify hardware and software issues. For more information, see Status checks for your instances and Troubleshooting instances with failed status checks in the Amazon EC2 User Guide.
Scheduled events - Amazon EC2 can schedule events (such as reboot, stop, or terminate) for your instances related to hardware issues, software updates, or system maintenance. For more information, see Scheduled events for your instances in the Amazon EC2 User Guide.
Instance state - You can manage your instances from the moment you launch them through their termination. For more information, see Instance lifecycle in the Amazon EC2 User Guide.
describeInstanceStatus
in interface AmazonEC2
describeInstanceStatusRequest
- public DescribeInstanceStatusResult describeInstanceStatus()
AmazonEC2
describeInstanceStatus
in interface AmazonEC2
AmazonEC2.describeInstanceStatus(DescribeInstanceStatusRequest)
public DescribeInstanceTypeOfferingsResult describeInstanceTypeOfferings(DescribeInstanceTypeOfferingsRequest request)
Returns a list of all instance types offered. The results can be filtered by location (Region or Availability Zone). If no location is specified, the instance types offered in the current Region are returned.
describeInstanceTypeOfferings
in interface AmazonEC2
describeInstanceTypeOfferingsRequest
- public DescribeInstanceTypesResult describeInstanceTypes(DescribeInstanceTypesRequest request)
Describes the details of the instance types that are offered in a location. The results can be filtered by the attributes of the instance types.
describeInstanceTypes
in interface AmazonEC2
describeInstanceTypesRequest
- public DescribeInstancesResult describeInstances(DescribeInstancesRequest request)
Describes the specified instances or all instances.
If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the output includes information for only those instances that meet the filter criteria. If you do not specify instance IDs or filters, the output includes information for all instances, which can affect performance. We recommend that you use pagination to ensure that the operation returns quickly and successfully.
If you specify an instance ID that is not valid, an error is returned. If you specify an instance that you do not own, it is not included in the output.
Recently terminated instances might appear in the returned results. This interval is usually less than one hour.
If you describe instances in the rare case where an Availability Zone is experiencing a service disruption and you specify instance IDs that are in the affected zone, or do not specify any instance IDs at all, the call fails. If you describe instances and specify only instance IDs that are in an unaffected zone, the call works normally.
describeInstances
in interface AmazonEC2
describeInstancesRequest
- public DescribeInstancesResult describeInstances()
AmazonEC2
describeInstances
in interface AmazonEC2
AmazonEC2.describeInstances(DescribeInstancesRequest)
public DescribeInternetGatewaysResult describeInternetGateways(DescribeInternetGatewaysRequest request)
Describes one or more of your internet gateways.
describeInternetGateways
in interface AmazonEC2
describeInternetGatewaysRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeInternetGatewaysRequest request = new DescribeInternetGatewaysRequest().withFilters(new Filter().withName("attachment.vpc-id").withValues( "vpc-a01106c2")); DescribeInternetGatewaysResult response = client.describeInternetGateways(request);
public DescribeInternetGatewaysResult describeInternetGateways()
AmazonEC2
describeInternetGateways
in interface AmazonEC2
AmazonEC2.describeInternetGateways(DescribeInternetGatewaysRequest)
public DescribeIpv6PoolsResult describeIpv6Pools(DescribeIpv6PoolsRequest request)
Describes your IPv6 address pools.
describeIpv6Pools
in interface AmazonEC2
describeIpv6PoolsRequest
- public DescribeKeyPairsResult describeKeyPairs(DescribeKeyPairsRequest request)
Describes the specified key pairs or all of your key pairs.
For more information about key pairs, see Key Pairs in the Amazon Elastic Compute Cloud User Guide.
describeKeyPairs
in interface AmazonEC2
describeKeyPairsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeKeyPairsRequest request = new DescribeKeyPairsRequest().withKeyNames("my-key-pair"); DescribeKeyPairsResult response = client.describeKeyPairs(request);
public DescribeKeyPairsResult describeKeyPairs()
AmazonEC2
describeKeyPairs
in interface AmazonEC2
AmazonEC2.describeKeyPairs(DescribeKeyPairsRequest)
public DescribeLaunchTemplateVersionsResult describeLaunchTemplateVersions(DescribeLaunchTemplateVersionsRequest request)
Describes one or more versions of a specified launch template. You can describe all versions, individual versions, or a range of versions. You can also describe all the latest versions or all the default versions of all the launch templates in your account.
describeLaunchTemplateVersions
in interface AmazonEC2
describeLaunchTemplateVersionsRequest
- public DescribeLaunchTemplatesResult describeLaunchTemplates(DescribeLaunchTemplatesRequest request)
Describes one or more launch templates.
describeLaunchTemplates
in interface AmazonEC2
describeLaunchTemplatesRequest
- public DescribeLocalGatewayRouteTableVirtualInterfaceGroupAssociationsResult describeLocalGatewayRouteTableVirtualInterfaceGroupAssociations(DescribeLocalGatewayRouteTableVirtualInterfaceGroupAssociationsRequest request)
Describes the associations between virtual interface groups and local gateway route tables.
describeLocalGatewayRouteTableVirtualInterfaceGroupAssociations
in interface AmazonEC2
describeLocalGatewayRouteTableVirtualInterfaceGroupAssociationsRequest
- public DescribeLocalGatewayRouteTableVpcAssociationsResult describeLocalGatewayRouteTableVpcAssociations(DescribeLocalGatewayRouteTableVpcAssociationsRequest request)
Describes the specified associations between VPCs and local gateway route tables.
describeLocalGatewayRouteTableVpcAssociations
in interface AmazonEC2
describeLocalGatewayRouteTableVpcAssociationsRequest
- public DescribeLocalGatewayRouteTablesResult describeLocalGatewayRouteTables(DescribeLocalGatewayRouteTablesRequest request)
Describes one or more local gateway route tables. By default, all local gateway route tables are described. Alternatively, you can filter the results.
describeLocalGatewayRouteTables
in interface AmazonEC2
describeLocalGatewayRouteTablesRequest
- public DescribeLocalGatewayVirtualInterfaceGroupsResult describeLocalGatewayVirtualInterfaceGroups(DescribeLocalGatewayVirtualInterfaceGroupsRequest request)
Describes the specified local gateway virtual interface groups.
describeLocalGatewayVirtualInterfaceGroups
in interface AmazonEC2
describeLocalGatewayVirtualInterfaceGroupsRequest
- public DescribeLocalGatewayVirtualInterfacesResult describeLocalGatewayVirtualInterfaces(DescribeLocalGatewayVirtualInterfacesRequest request)
Describes the specified local gateway virtual interfaces.
describeLocalGatewayVirtualInterfaces
in interface AmazonEC2
describeLocalGatewayVirtualInterfacesRequest
- public DescribeLocalGatewaysResult describeLocalGateways(DescribeLocalGatewaysRequest request)
Describes one or more local gateways. By default, all local gateways are described. Alternatively, you can filter the results.
describeLocalGateways
in interface AmazonEC2
describeLocalGatewaysRequest
- public DescribeManagedPrefixListsResult describeManagedPrefixLists(DescribeManagedPrefixListsRequest request)
Describes your managed prefix lists and any AWS-managed prefix lists.
To view the entries for your prefix list, use GetManagedPrefixListEntries.
describeManagedPrefixLists
in interface AmazonEC2
describeManagedPrefixListsRequest
- public DescribeMovingAddressesResult describeMovingAddresses(DescribeMovingAddressesRequest request)
Describes your Elastic IP addresses that are being moved to the EC2-VPC platform, or that are being restored to the EC2-Classic platform. This request does not return information about any other Elastic IP addresses in your account.
describeMovingAddresses
in interface AmazonEC2
describeMovingAddressesRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeMovingAddressesRequest request = new DescribeMovingAddressesRequest(); DescribeMovingAddressesResult response = client.describeMovingAddresses(request);
public DescribeMovingAddressesResult describeMovingAddresses()
AmazonEC2
describeMovingAddresses
in interface AmazonEC2
AmazonEC2.describeMovingAddresses(DescribeMovingAddressesRequest)
public DescribeNatGatewaysResult describeNatGateways(DescribeNatGatewaysRequest request)
Describes one or more of your NAT gateways.
describeNatGateways
in interface AmazonEC2
describeNatGatewaysRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeNatGatewaysRequest request = new DescribeNatGatewaysRequest().withFilter(new Filter().withName("vpc-id").withValues("vpc-1a2b3c4d")); DescribeNatGatewaysResult response = client.describeNatGateways(request);
public DescribeNetworkAclsResult describeNetworkAcls(DescribeNetworkAclsRequest request)
Describes one or more of your network ACLs.
For more information, see Network ACLs in the Amazon Virtual Private Cloud User Guide.
describeNetworkAcls
in interface AmazonEC2
describeNetworkAclsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeNetworkAclsRequest request = new DescribeNetworkAclsRequest().withNetworkAclIds("acl-5fb85d36"); DescribeNetworkAclsResult response = client.describeNetworkAcls(request);
public DescribeNetworkAclsResult describeNetworkAcls()
AmazonEC2
describeNetworkAcls
in interface AmazonEC2
AmazonEC2.describeNetworkAcls(DescribeNetworkAclsRequest)
public DescribeNetworkInsightsAnalysesResult describeNetworkInsightsAnalyses(DescribeNetworkInsightsAnalysesRequest request)
Describes one or more of your network insights analyses.
describeNetworkInsightsAnalyses
in interface AmazonEC2
describeNetworkInsightsAnalysesRequest
- public DescribeNetworkInsightsPathsResult describeNetworkInsightsPaths(DescribeNetworkInsightsPathsRequest request)
Describes one or more of your paths.
describeNetworkInsightsPaths
in interface AmazonEC2
describeNetworkInsightsPathsRequest
- public DescribeNetworkInterfaceAttributeResult describeNetworkInterfaceAttribute(DescribeNetworkInterfaceAttributeRequest request)
Describes a network interface attribute. You can specify only one attribute at a time.
describeNetworkInterfaceAttribute
in interface AmazonEC2
describeNetworkInterfaceAttributeRequest
- Contains the parameters for DescribeNetworkInterfaceAttribute.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeNetworkInterfaceAttributeRequest request = new DescribeNetworkInterfaceAttributeRequest().withAttribute("attachment").withNetworkInterfaceId( "eni-686ea200"); DescribeNetworkInterfaceAttributeResult response = client.describeNetworkInterfaceAttribute(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeNetworkInterfaceAttributeRequest request = new DescribeNetworkInterfaceAttributeRequest().withAttribute("description").withNetworkInterfaceId( "eni-686ea200"); DescribeNetworkInterfaceAttributeResult response = client.describeNetworkInterfaceAttribute(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeNetworkInterfaceAttributeRequest request = new DescribeNetworkInterfaceAttributeRequest().withAttribute("groupSet").withNetworkInterfaceId( "eni-686ea200"); DescribeNetworkInterfaceAttributeResult response = client.describeNetworkInterfaceAttribute(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeNetworkInterfaceAttributeRequest request = new DescribeNetworkInterfaceAttributeRequest().withAttribute("sourceDestCheck") .withNetworkInterfaceId("eni-686ea200"); DescribeNetworkInterfaceAttributeResult response = client.describeNetworkInterfaceAttribute(request);
public DescribeNetworkInterfacePermissionsResult describeNetworkInterfacePermissions(DescribeNetworkInterfacePermissionsRequest request)
Describes the permissions for your network interfaces.
describeNetworkInterfacePermissions
in interface AmazonEC2
describeNetworkInterfacePermissionsRequest
- Contains the parameters for DescribeNetworkInterfacePermissions.public DescribeNetworkInterfacesResult describeNetworkInterfaces(DescribeNetworkInterfacesRequest request)
Describes one or more of your network interfaces.
describeNetworkInterfaces
in interface AmazonEC2
describeNetworkInterfacesRequest
- Contains the parameters for DescribeNetworkInterfaces.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeNetworkInterfacesRequest request = new DescribeNetworkInterfacesRequest().withNetworkInterfaceIds("eni-e5aa89a3"); DescribeNetworkInterfacesResult response = client.describeNetworkInterfaces(request);
public DescribeNetworkInterfacesResult describeNetworkInterfaces()
AmazonEC2
describeNetworkInterfaces
in interface AmazonEC2
AmazonEC2.describeNetworkInterfaces(DescribeNetworkInterfacesRequest)
public DescribePlacementGroupsResult describePlacementGroups(DescribePlacementGroupsRequest request)
Describes the specified placement groups or all of your placement groups. For more information, see Placement groups in the Amazon EC2 User Guide.
describePlacementGroups
in interface AmazonEC2
describePlacementGroupsRequest
- public DescribePlacementGroupsResult describePlacementGroups()
AmazonEC2
describePlacementGroups
in interface AmazonEC2
AmazonEC2.describePlacementGroups(DescribePlacementGroupsRequest)
public DescribePrefixListsResult describePrefixLists(DescribePrefixListsRequest request)
Describes available AWS services in a prefix list format, which includes the prefix list name and prefix list ID of the service and the IP address range for the service.
We recommend that you use DescribeManagedPrefixLists instead.
describePrefixLists
in interface AmazonEC2
describePrefixListsRequest
- public DescribePrefixListsResult describePrefixLists()
AmazonEC2
describePrefixLists
in interface AmazonEC2
AmazonEC2.describePrefixLists(DescribePrefixListsRequest)
public DescribePrincipalIdFormatResult describePrincipalIdFormat(DescribePrincipalIdFormatRequest request)
Describes the ID format settings for the root user and all IAM roles and IAM users that have explicitly specified a longer ID (17-character ID) preference.
By default, all IAM roles and IAM users default to the same ID settings as the root user, unless they explicitly override the settings. This request is useful for identifying those IAM users and IAM roles that have overridden the default ID settings.
The following resource types support longer IDs: bundle
| conversion-task
|
customer-gateway
| dhcp-options
| elastic-ip-allocation
|
elastic-ip-association
| export-task
| flow-log
| image
|
import-task
| instance
| internet-gateway
| network-acl
|
network-acl-association
| network-interface
| network-interface-attachment
| prefix-list
| reservation
| route-table
|
route-table-association
| security-group
| snapshot
| subnet
| subnet-cidr-block-association
| volume
| vpc
|
vpc-cidr-block-association
| vpc-endpoint
| vpc-peering-connection
|
vpn-connection
| vpn-gateway
.
describePrincipalIdFormat
in interface AmazonEC2
describePrincipalIdFormatRequest
- public DescribePublicIpv4PoolsResult describePublicIpv4Pools(DescribePublicIpv4PoolsRequest request)
Describes the specified IPv4 address pools.
describePublicIpv4Pools
in interface AmazonEC2
describePublicIpv4PoolsRequest
- public DescribeRegionsResult describeRegions(DescribeRegionsRequest request)
Describes the Regions that are enabled for your account, or all Regions.
For a list of the Regions supported by Amazon EC2, see Regions and Endpoints.
For information about enabling and disabling Regions for your account, see Managing AWS Regions in the AWS General Reference.
describeRegions
in interface AmazonEC2
describeRegionsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeRegionsRequest request = new DescribeRegionsRequest(); DescribeRegionsResult response = client.describeRegions(request);
public DescribeRegionsResult describeRegions()
AmazonEC2
describeRegions
in interface AmazonEC2
AmazonEC2.describeRegions(DescribeRegionsRequest)
public DescribeReservedInstancesResult describeReservedInstances(DescribeReservedInstancesRequest request)
Describes one or more of the Reserved Instances that you purchased.
For more information about Reserved Instances, see Reserved Instances in the Amazon EC2 User Guide.
describeReservedInstances
in interface AmazonEC2
describeReservedInstancesRequest
- Contains the parameters for DescribeReservedInstances.public DescribeReservedInstancesResult describeReservedInstances()
AmazonEC2
describeReservedInstances
in interface AmazonEC2
AmazonEC2.describeReservedInstances(DescribeReservedInstancesRequest)
public DescribeReservedInstancesListingsResult describeReservedInstancesListings(DescribeReservedInstancesListingsRequest request)
Describes your account's Reserved Instance listings in the Reserved Instance Marketplace.
The Reserved Instance Marketplace matches sellers who want to resell Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold through the Reserved Instance Marketplace work like any other Reserved Instances.
As a seller, you choose to list some or all of your Reserved Instances, and you specify the upfront price to receive for them. Your Reserved Instances are then listed in the Reserved Instance Marketplace and are available for purchase.
As a buyer, you specify the configuration of the Reserved Instance to purchase, and the Marketplace matches what you're searching for with what's available. The Marketplace first sells the lowest priced Reserved Instances to you, and continues to sell available Reserved Instance listings to you until your demand is met. You are charged based on the total price of all of the listings that you purchase.
For more information, see Reserved Instance Marketplace in the Amazon EC2 User Guide.
describeReservedInstancesListings
in interface AmazonEC2
describeReservedInstancesListingsRequest
- Contains the parameters for DescribeReservedInstancesListings.public DescribeReservedInstancesListingsResult describeReservedInstancesListings()
AmazonEC2
describeReservedInstancesListings
in interface AmazonEC2
AmazonEC2.describeReservedInstancesListings(DescribeReservedInstancesListingsRequest)
public DescribeReservedInstancesModificationsResult describeReservedInstancesModifications(DescribeReservedInstancesModificationsRequest request)
Describes the modifications made to your Reserved Instances. If no parameter is specified, information about all your Reserved Instances modification requests is returned. If a modification ID is specified, only information about the specific modification is returned.
For more information, see Modifying Reserved Instances in the Amazon EC2 User Guide.
describeReservedInstancesModifications
in interface AmazonEC2
describeReservedInstancesModificationsRequest
- Contains the parameters for DescribeReservedInstancesModifications.public DescribeReservedInstancesModificationsResult describeReservedInstancesModifications()
AmazonEC2
describeReservedInstancesModifications
in interface AmazonEC2
AmazonEC2.describeReservedInstancesModifications(DescribeReservedInstancesModificationsRequest)
public DescribeReservedInstancesOfferingsResult describeReservedInstancesOfferings(DescribeReservedInstancesOfferingsRequest request)
Describes Reserved Instance offerings that are available for purchase. With Reserved Instances, you purchase the right to launch instances for a period of time. During that time period, you do not receive insufficient capacity errors, and you pay a lower usage rate than the rate charged for On-Demand instances for the actual time used.
If you have listed your own Reserved Instances for sale in the Reserved Instance Marketplace, they will be excluded from these results. This is to ensure that you do not purchase your own Reserved Instances.
For more information, see Reserved Instance Marketplace in the Amazon EC2 User Guide.
describeReservedInstancesOfferings
in interface AmazonEC2
describeReservedInstancesOfferingsRequest
- Contains the parameters for DescribeReservedInstancesOfferings.public DescribeReservedInstancesOfferingsResult describeReservedInstancesOfferings()
AmazonEC2
describeReservedInstancesOfferings
in interface AmazonEC2
AmazonEC2.describeReservedInstancesOfferings(DescribeReservedInstancesOfferingsRequest)
public DescribeRouteTablesResult describeRouteTables(DescribeRouteTablesRequest request)
Describes one or more of your route tables.
Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations.
For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
describeRouteTables
in interface AmazonEC2
describeRouteTablesRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeRouteTablesRequest request = new DescribeRouteTablesRequest().withRouteTableIds("rtb-1f382e7d"); DescribeRouteTablesResult response = client.describeRouteTables(request);
public DescribeRouteTablesResult describeRouteTables()
AmazonEC2
describeRouteTables
in interface AmazonEC2
AmazonEC2.describeRouteTables(DescribeRouteTablesRequest)
public DescribeScheduledInstanceAvailabilityResult describeScheduledInstanceAvailability(DescribeScheduledInstanceAvailabilityRequest request)
Finds available schedules that meet the specified criteria.
You can search for an available schedule no more than 3 months in advance. You must meet the minimum required duration of 1,200 hours per year. For example, the minimum daily schedule is 4 hours, the minimum weekly schedule is 24 hours, and the minimum monthly schedule is 100 hours.
After you find a schedule that meets your needs, call PurchaseScheduledInstances to purchase Scheduled Instances with that schedule.
describeScheduledInstanceAvailability
in interface AmazonEC2
describeScheduledInstanceAvailabilityRequest
- Contains the parameters for DescribeScheduledInstanceAvailability.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeScheduledInstanceAvailabilityRequest request = new DescribeScheduledInstanceAvailabilityRequest().withFirstSlotStartTimeRange( new SlotDateTimeRangeRequest().withEarliestTime(new Date("2016-01-31T00:00:00Z")).withLatestTime(new Date("2016-01-31T04:00:00Z"))) .withRecurrence(new ScheduledInstanceRecurrenceRequest().withFrequency("Weekly").withInterval(1).withOccurrenceDays(1)); DescribeScheduledInstanceAvailabilityResult response = client.describeScheduledInstanceAvailability(request);
public DescribeScheduledInstancesResult describeScheduledInstances(DescribeScheduledInstancesRequest request)
Describes the specified Scheduled Instances or all your Scheduled Instances.
describeScheduledInstances
in interface AmazonEC2
describeScheduledInstancesRequest
- Contains the parameters for DescribeScheduledInstances.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeScheduledInstancesRequest request = new DescribeScheduledInstancesRequest().withScheduledInstanceIds("sci-1234-1234-1234-1234-123456789012"); DescribeScheduledInstancesResult response = client.describeScheduledInstances(request);
public DescribeSecurityGroupReferencesResult describeSecurityGroupReferences(DescribeSecurityGroupReferencesRequest request)
[VPC only] Describes the VPCs on the other side of a VPC peering connection that are referencing the security groups you've specified in this request.
describeSecurityGroupReferences
in interface AmazonEC2
describeSecurityGroupReferencesRequest
- public DescribeSecurityGroupsResult describeSecurityGroups(DescribeSecurityGroupsRequest request)
Describes the specified security groups or all of your security groups.
A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. For more information, see Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC in the Amazon Virtual Private Cloud User Guide.
describeSecurityGroups
in interface AmazonEC2
describeSecurityGroupsRequest
- public DescribeSecurityGroupsResult describeSecurityGroups()
AmazonEC2
describeSecurityGroups
in interface AmazonEC2
AmazonEC2.describeSecurityGroups(DescribeSecurityGroupsRequest)
public DescribeSnapshotAttributeResult describeSnapshotAttribute(DescribeSnapshotAttributeRequest request)
Describes the specified attribute of the specified snapshot. You can specify only one attribute at a time.
For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
describeSnapshotAttribute
in interface AmazonEC2
describeSnapshotAttributeRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSnapshotAttributeRequest request = new DescribeSnapshotAttributeRequest().withAttribute("createVolumePermission").withSnapshotId( "snap-066877671789bd71b"); DescribeSnapshotAttributeResult response = client.describeSnapshotAttribute(request);
public DescribeSnapshotsResult describeSnapshots(DescribeSnapshotsRequest request)
Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you.
The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other AWS accounts for which you have explicit create volume permissions.
The create volume permissions fall into the following categories:
public: The owner of the snapshot granted create volume permissions for the snapshot to the
all
group. All AWS accounts have create volume permissions for these snapshots.
explicit: The owner of the snapshot granted create volume permissions to a specific AWS account.
implicit: An AWS account has implicit create volume permissions for all snapshots it owns.
The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or AWS accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions.
If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results.
If you specify one or more snapshot owners using the OwnerIds
option, only snapshots from the
specified owners and for which you have access are returned. The results can include the AWS account IDs of the
specified owners, amazon
for snapshots owned by Amazon, or self
for snapshots that you
own.
If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are
returned. You can specify AWS account IDs (if you own the snapshots), self
for snapshots for which
you own or have explicit permissions, or all
for public snapshots.
If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more
manageable. The MaxResults
parameter sets the maximum number of results returned in a single page.
If the list of results exceeds your MaxResults
value, then that number of results is returned along
with a NextToken
value that can be passed to a subsequent DescribeSnapshots
request to
retrieve the remaining results.
To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores.
For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
describeSnapshots
in interface AmazonEC2
describeSnapshotsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSnapshotsRequest request = new DescribeSnapshotsRequest().withSnapshotIds("snap-1234567890abcdef0"); DescribeSnapshotsResult response = client.describeSnapshots(request);AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSnapshotsRequest request = new DescribeSnapshotsRequest().withFilters(new Filter().withName("status").withValues("pending")).withOwnerIds( "012345678910"); DescribeSnapshotsResult response = client.describeSnapshots(request);
public DescribeSnapshotsResult describeSnapshots()
AmazonEC2
describeSnapshots
in interface AmazonEC2
AmazonEC2.describeSnapshots(DescribeSnapshotsRequest)
public DescribeSpotDatafeedSubscriptionResult describeSpotDatafeedSubscription(DescribeSpotDatafeedSubscriptionRequest request)
Describes the data feed for Spot Instances. For more information, see Spot Instance data feed in the Amazon EC2 User Guide for Linux Instances.
describeSpotDatafeedSubscription
in interface AmazonEC2
describeSpotDatafeedSubscriptionRequest
- Contains the parameters for DescribeSpotDatafeedSubscription.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSpotDatafeedSubscriptionRequest request = new DescribeSpotDatafeedSubscriptionRequest(); DescribeSpotDatafeedSubscriptionResult response = client.describeSpotDatafeedSubscription(request);
public DescribeSpotDatafeedSubscriptionResult describeSpotDatafeedSubscription()
AmazonEC2
describeSpotDatafeedSubscription
in interface AmazonEC2
AmazonEC2.describeSpotDatafeedSubscription(DescribeSpotDatafeedSubscriptionRequest)
public DescribeSpotFleetInstancesResult describeSpotFleetInstances(DescribeSpotFleetInstancesRequest request)
Describes the running instances for the specified Spot Fleet.
describeSpotFleetInstances
in interface AmazonEC2
describeSpotFleetInstancesRequest
- Contains the parameters for DescribeSpotFleetInstances.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSpotFleetInstancesRequest request = new DescribeSpotFleetInstancesRequest().withSpotFleetRequestId("sfr-73fbd2ce-aa30-494c-8788-1cee4EXAMPLE"); DescribeSpotFleetInstancesResult response = client.describeSpotFleetInstances(request);
public DescribeSpotFleetRequestHistoryResult describeSpotFleetRequestHistory(DescribeSpotFleetRequestHistoryRequest request)
Describes the events for the specified Spot Fleet request during the specified time.
Spot Fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query by the last evaluated time and not miss a recorded event. Spot Fleet events are available for 48 hours.
describeSpotFleetRequestHistory
in interface AmazonEC2
describeSpotFleetRequestHistoryRequest
- Contains the parameters for DescribeSpotFleetRequestHistory.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSpotFleetRequestHistoryRequest request = new DescribeSpotFleetRequestHistoryRequest().withSpotFleetRequestId( "sfr-73fbd2ce-aa30-494c-8788-1cee4EXAMPLE").withStartTime(new Date("2015-05-26T00:00:00Z")); DescribeSpotFleetRequestHistoryResult response = client.describeSpotFleetRequestHistory(request);
public DescribeSpotFleetRequestsResult describeSpotFleetRequests(DescribeSpotFleetRequestsRequest request)
Describes your Spot Fleet requests.
Spot Fleet requests are deleted 48 hours after they are canceled and their instances are terminated.
describeSpotFleetRequests
in interface AmazonEC2
describeSpotFleetRequestsRequest
- Contains the parameters for DescribeSpotFleetRequests.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSpotFleetRequestsRequest request = new DescribeSpotFleetRequestsRequest().withSpotFleetRequestIds("sfr-73fbd2ce-aa30-494c-8788-1cee4EXAMPLE"); DescribeSpotFleetRequestsResult response = client.describeSpotFleetRequests(request);
public DescribeSpotFleetRequestsResult describeSpotFleetRequests()
AmazonEC2
describeSpotFleetRequests
in interface AmazonEC2
AmazonEC2.describeSpotFleetRequests(DescribeSpotFleetRequestsRequest)
public DescribeSpotInstanceRequestsResult describeSpotInstanceRequests(DescribeSpotInstanceRequestsRequest request)
Describes the specified Spot Instance requests.
You can use DescribeSpotInstanceRequests
to find a running Spot Instance by examining the response.
If the status of the Spot Instance is fulfilled
, the instance ID appears in the response and
contains the identifier of the instance. Alternatively, you can use DescribeInstances with a
filter to look for instances where the instance lifecycle is spot
.
We recommend that you set MaxResults
to a value between 5 and 1000 to limit the number of results
returned. This paginates the output, which makes the list more manageable and returns the results faster. If the
list of results exceeds your MaxResults
value, then that number of results is returned along with a
NextToken
value that can be passed to a subsequent DescribeSpotInstanceRequests
request
to retrieve the remaining results.
Spot Instance requests are deleted four hours after they are canceled and their instances are terminated.
describeSpotInstanceRequests
in interface AmazonEC2
describeSpotInstanceRequestsRequest
- Contains the parameters for DescribeSpotInstanceRequests.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSpotInstanceRequestsRequest request = new DescribeSpotInstanceRequestsRequest().withSpotInstanceRequestIds("sir-08b93456"); DescribeSpotInstanceRequestsResult response = client.describeSpotInstanceRequests(request);
public DescribeSpotInstanceRequestsResult describeSpotInstanceRequests()
AmazonEC2
describeSpotInstanceRequests
in interface AmazonEC2
AmazonEC2.describeSpotInstanceRequests(DescribeSpotInstanceRequestsRequest)
public DescribeSpotPriceHistoryResult describeSpotPriceHistory(DescribeSpotPriceHistoryRequest request)
Describes the Spot price history. For more information, see Spot Instance pricing history in the Amazon EC2 User Guide for Linux Instances.
When you specify a start and end time, this operation returns the prices of the instance types within the time range that you specified and the time when the price changed. The price is valid within the time period that you specified; the response merely indicates the last time that the price changed.
describeSpotPriceHistory
in interface AmazonEC2
describeSpotPriceHistoryRequest
- Contains the parameters for DescribeSpotPriceHistory.AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSpotPriceHistoryRequest request = new DescribeSpotPriceHistoryRequest().withEndTime(new Date("2014-01-06T08:09:10")) .withInstanceTypes("m1.xlarge").withProductDescriptions("Linux/UNIX (Amazon VPC)").withStartTime(new Date("2014-01-06T07:08:09")); DescribeSpotPriceHistoryResult response = client.describeSpotPriceHistory(request);
public DescribeSpotPriceHistoryResult describeSpotPriceHistory()
AmazonEC2
describeSpotPriceHistory
in interface AmazonEC2
AmazonEC2.describeSpotPriceHistory(DescribeSpotPriceHistoryRequest)
public DescribeStaleSecurityGroupsResult describeStaleSecurityGroups(DescribeStaleSecurityGroupsRequest request)
[VPC only] Describes the stale security group rules for security groups in a specified VPC. Rules are stale when they reference a deleted security group in a peer VPC, or a security group in a peer VPC for which the VPC peering connection has been deleted.
describeStaleSecurityGroups
in interface AmazonEC2
describeStaleSecurityGroupsRequest
- public DescribeSubnetsResult describeSubnets(DescribeSubnetsRequest request)
Describes one or more of your subnets.
For more information, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
describeSubnets
in interface AmazonEC2
describeSubnetsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeSubnetsRequest request = new DescribeSubnetsRequest().withFilters(new Filter().withName("vpc-id").withValues("vpc-a01106c2")); DescribeSubnetsResult response = client.describeSubnets(request);
public DescribeSubnetsResult describeSubnets()
AmazonEC2
describeSubnets
in interface AmazonEC2
AmazonEC2.describeSubnets(DescribeSubnetsRequest)
public DescribeTagsResult describeTags(DescribeTagsRequest request)
Describes the specified tags for your EC2 resources.
For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide.
describeTags
in interface AmazonEC2
describeTagsRequest
- AmazonEC2 client = AmazonEC2ClientBuilder.standard().build(); DescribeTagsRequest request = new DescribeTagsRequest().withFilters(new Filter().withName("resource-id").withValues("i-1234567890abcdef8")); DescribeTagsResult response = client.describeTags(request);
public DescribeTagsResult describeTags()
AmazonEC2
describeTags
in interface AmazonEC2
AmazonEC2.describeTags(DescribeTagsRequest)
public DescribeTrafficMirrorFiltersResult describeTrafficMirrorFilters(DescribeTrafficMirrorFiltersRequest request)
Describes one or more Traffic Mirror filters.
describeTrafficMirrorFilters
in interface AmazonEC2
describeTrafficMirrorFiltersRequest
-