TableBase
- class aws_cdk.aws_dynamodb.TableBase(scope, id, *, account=None, environment_from_arn=None, physical_name=None, region=None)
Bases:
Resource
- Parameters:
scope (
Construct
) –id (
str
) –account (
Optional
[str
]) – The AWS account ID this resource belongs to. Default: - the resource is in the same account as the stack it belongs toenvironment_from_arn (
Optional
[str
]) – ARN to deduce region and account from. The ARN is parsed and the account and region are taken from the ARN. This should be used for imported resources. Cannot be supplied together with eitheraccount
orregion
. Default: - take environment fromaccount
,region
parameters, or use Stack environment.physical_name (
Optional
[str
]) – The value passed in by users to the physical name prop of the resource. -undefined
implies that a physical name will be allocated by CloudFormation during deployment. - a concrete value implies a specific physical name -PhysicalName.GENERATE_IF_NEEDED
is a marker that indicates that a physical will only be generated by the CDK if it is needed for cross-environment references. Otherwise, it will be allocated by CloudFormation. Default: - The physical name will be allocated by CloudFormation at deployment timeregion (
Optional
[str
]) – The AWS region this resource belongs to. Default: - the resource is in the same region as the stack it belongs to
Methods
- add_to_resource_policy(statement)
Adds a statement to the resource policy associated with this file system.
A resource policy will be automatically created upon the first call to
addToResourcePolicy
.Note that this does not work with imported file systems.
- Parameters:
statement (
PolicyStatement
) – The policy statement to add.- Return type:
- apply_removal_policy(policy)
Apply the given removal policy to this resource.
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.
The resource can be deleted (
RemovalPolicy.DESTROY
), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN
).- Parameters:
policy (
RemovalPolicy
) –- Return type:
None
- grant(grantee, *actions)
Adds an IAM policy statement associated with this table to an IAM principal’s policy.
If
encryptionKey
is present, appropriate grants to the key needs to be added separately using thetable.encryptionKey.grant*
methods.- Parameters:
grantee (
IGrantable
) – The principal (no-op if undefined).actions (
str
) – The set of actions to allow (i.e. “dynamodb:PutItem”, “dynamodb:GetItem”, …).
- Return type:
- grant_full_access(grantee)
Permits all DynamoDB operations (“dynamodb:*”) to an IAM principal.
Appropriate grants will also be added to the customer-managed KMS key if one was configured.
- Parameters:
grantee (
IGrantable
) – The principal to grant access to.- Return type:
- grant_read_data(grantee)
Permits an IAM principal all data read operations from this table: BatchGetItem, GetRecords, GetShardIterator, Query, GetItem, Scan, DescribeTable.
Appropriate grants will also be added to the customer-managed KMS key if one was configured.
- Parameters:
grantee (
IGrantable
) – The principal to grant access to.- Return type:
- grant_read_write_data(grantee)
Permits an IAM principal to all data read/write operations to this table.
BatchGetItem, GetRecords, GetShardIterator, Query, GetItem, Scan, BatchWriteItem, PutItem, UpdateItem, DeleteItem, DescribeTable
Appropriate grants will also be added to the customer-managed KMS key if one was configured.
- Parameters:
grantee (
IGrantable
) – The principal to grant access to.- Return type:
- grant_stream(grantee, *actions)
Adds an IAM policy statement associated with this table’s stream to an IAM principal’s policy.
If
encryptionKey
is present, appropriate grants to the key needs to be added separately using thetable.encryptionKey.grant*
methods.- Parameters:
grantee (
IGrantable
) – The principal (no-op if undefined).actions (
str
) – The set of actions to allow (i.e. “dynamodb:DescribeStream”, “dynamodb:GetRecords”, …).
- Return type:
- grant_stream_read(grantee)
Permits an IAM principal all stream data read operations for this table’s stream: DescribeStream, GetRecords, GetShardIterator, ListStreams.
Appropriate grants will also be added to the customer-managed KMS key if one was configured.
- Parameters:
grantee (
IGrantable
) – The principal to grant access to.- Return type:
- grant_table_list_streams(grantee)
Permits an IAM Principal to list streams attached to current dynamodb table.
- Parameters:
grantee (
IGrantable
) – The principal (no-op if undefined).- Return type:
- grant_write_data(grantee)
Permits an IAM principal all data write operations to this table: BatchWriteItem, PutItem, UpdateItem, DeleteItem, DescribeTable.
Appropriate grants will also be added to the customer-managed KMS key if one was configured.
- Parameters:
grantee (
IGrantable
) – The principal to grant access to.- Return type:
- metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Return the given named metric for this Table.
By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
metric_name (
str
) –account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No labelperiod (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_conditional_check_failed_requests(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the conditional check failed requests this table.
By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_consumed_read_capacity_units(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the consumed read capacity units this table.
By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_consumed_write_capacity_units(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the consumed write capacity units this table.
By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_successful_request_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the successful request latency this table.
By default, the metric will be calculated as an average over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_system_errors(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
(deprecated) Metric for the system errors this table.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Deprecated:
use
metricSystemErrorsForOperations
.- Stability:
deprecated
- Return type:
- metric_system_errors_for_operations(*, operations=None, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the system errors this table.
This will sum errors across all possible operations. Note that by default, each individual metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
operations (
Optional
[Sequence
[Operation
]]) – The operations to apply the metric to. Default: - All operations available by DynamoDB tables will be considered.account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_throttled_requests(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
(deprecated) How many requests are throttled on this table.
Default: sum over 5 minutes
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Deprecated:
Do not use this function. It returns an invalid metric. Use
metricThrottledRequestsForOperation
instead.- Stability:
deprecated
- Return type:
- metric_throttled_requests_for_operation(operation, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
How many requests are throttled on this table, for the given operation.
Default: sum over 5 minutes
- Parameters:
operation (
str
) –account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_throttled_requests_for_operations(*, operations=None, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
How many requests are throttled on this table.
This will sum errors across all possible operations. Note that by default, each individual metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
operations (
Optional
[Sequence
[Operation
]]) – The operations to apply the metric to. Default: - All operations available by DynamoDB tables will be considered.account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric_user_errors(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the user errors.
Note that this metric reports user errors across all the tables in the account and region the table resides in.
By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the
statistic
andperiod
properties.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- to_string()
Returns a string representation of this construct.
- Return type:
str
Attributes
- encryption_key
KMS encryption key, if this table uses a customer-managed encryption key.
- env
The environment this resource belongs to.
For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.
- node
The tree node.
- resource_policy
Resource policy to assign to table.
- Attribute:
true
- stack
The stack in which this resource is defined.
- table_arn
Arn of the dynamodb table.
- Attribute:
true
- table_name
Table name of the dynamodb table.
- Attribute:
true
- table_stream_arn
ARN of the table’s stream, if there is one.
- Attribute:
true
Static Methods
- classmethod is_construct(x)
Checks if
x
is a construct.Use this method instead of
instanceof
to properly detectConstruct
instances, even when the construct library is symlinked.Explanation: in JavaScript, multiple copies of the
constructs
library on disk are seen as independent, completely different libraries. As a consequence, the classConstruct
in each copy of theconstructs
library is seen as a different class, and an instance of one class will not test asinstanceof
the other class.npm install
will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of theconstructs
library can be accidentally installed, andinstanceof
will behave unpredictably. It is safest to avoid usinginstanceof
, and using this type-testing method instead.- Parameters:
x (
Any
) – Any object.- Return type:
bool
- Returns:
true if
x
is an object created from a class which extendsConstruct
.
- classmethod is_owned_resource(construct)
Returns true if the construct was created by CDK, and false otherwise.
- Parameters:
construct (
IConstruct
) –- Return type:
bool
- classmethod is_resource(construct)
Check whether the given construct is a Resource.
- Parameters:
construct (
IConstruct
) –- Return type:
bool