Domain

class aws_cdk.aws_opensearchservice.Domain(scope, id, *, version, access_policies=None, advanced_options=None, automated_snapshot_start_hour=None, capacity=None, cognito_dashboards_auth=None, custom_endpoint=None, domain_name=None, ebs=None, enable_version_upgrade=None, encryption_at_rest=None, enforce_https=None, fine_grained_access_control=None, logging=None, node_to_node_encryption=None, removal_policy=None, security_groups=None, tls_security_policy=None, use_unsigned_basic_auth=None, vpc=None, vpc_subnets=None, zone_awareness=None)

Bases: Resource

Provides an Amazon OpenSearch Service domain.

ExampleMetadata

infused

Example:

domain = Domain(self, "Domain",
    version=EngineVersion.OPENSEARCH_1_0,
    ebs=EbsOptions(
        volume_size=100,
        volume_type=ec2.EbsDeviceVolumeType.GENERAL_PURPOSE_SSD
    ),
    node_to_node_encryption=True,
    encryption_at_rest=EncryptionAtRestOptions(
        enabled=True
    )
)
Parameters
  • scope (Construct) –

  • id (str) –

  • version (EngineVersion) – The Elasticsearch/OpenSearch version that your domain will leverage.

  • access_policies (Optional[Sequence[PolicyStatement]]) – Domain access policies. Default: - No access policies.

  • advanced_options (Optional[Mapping[str, str]]) – Additional options to specify for the Amazon OpenSearch Service domain. Default: - no advanced options are specified

  • automated_snapshot_start_hour (Union[int, float, None]) – The hour in UTC during which the service takes an automated daily snapshot of the indices in the Amazon OpenSearch Service domain. Only applies for Elasticsearch versions below 5.3. Default: - Hourly automated snapshots not used

  • capacity (Union[CapacityConfig, Dict[str, Any], None]) – The cluster capacity configuration for the Amazon OpenSearch Service domain. Default: - 1 r5.large.search data node; no dedicated master nodes.

  • cognito_dashboards_auth (Union[CognitoOptions, Dict[str, Any], None]) – Configures Amazon OpenSearch Service to use Amazon Cognito authentication for OpenSearch Dashboards. Default: - Cognito not used for authentication to OpenSearch Dashboards.

  • custom_endpoint (Union[CustomEndpointOptions, Dict[str, Any], None]) – To configure a custom domain configure these options. If you specify a Route53 hosted zone it will create a CNAME record and use DNS validation for the certificate Default: - no custom domain endpoint will be configured

  • domain_name (Optional[str]) – Enforces a particular physical domain name. Default: - A name will be auto-generated.

  • ebs (Union[EbsOptions, Dict[str, Any], None]) – The configurations of Amazon Elastic Block Store (Amazon EBS) volumes that are attached to data nodes in the Amazon OpenSearch Service domain. Default: - 10 GiB General Purpose (SSD) volumes per node.

  • enable_version_upgrade (Optional[bool]) – To upgrade an Amazon OpenSearch Service domain to a new version, rather than replacing the entire domain resource, use the EnableVersionUpgrade update policy. Default: - false

  • encryption_at_rest (Union[EncryptionAtRestOptions, Dict[str, Any], None]) – Encryption at rest options for the cluster. Default: - No encryption at rest

  • enforce_https (Optional[bool]) – True to require that all traffic to the domain arrive over HTTPS. Default: - false

  • fine_grained_access_control (Union[AdvancedSecurityOptions, Dict[str, Any], None]) – Specifies options for fine-grained access control. Requires Elasticsearch version 6.7 or later or OpenSearch version 1.0 or later. Enabling fine-grained access control also requires encryption of data at rest and node-to-node encryption, along with enforced HTTPS. Default: - fine-grained access control is disabled

  • logging (Union[LoggingOptions, Dict[str, Any], None]) – Configuration log publishing configuration options. Default: - No logs are published

  • node_to_node_encryption (Optional[bool]) – Specify true to enable node to node encryption. Requires Elasticsearch version 6.0 or later or OpenSearch version 1.0 or later. Default: - Node to node encryption is not enabled.

  • removal_policy (Optional[RemovalPolicy]) – Policy to apply when the domain is removed from the stack. Default: RemovalPolicy.RETAIN

  • security_groups (Optional[Sequence[ISecurityGroup]]) – The list of security groups that are associated with the VPC endpoints for the domain. Only used if vpc is specified. Default: - One new security group is created.

  • tls_security_policy (Optional[TLSSecurityPolicy]) – The minimum TLS version required for traffic to the domain. Default: - TLSSecurityPolicy.TLS_1_0

  • use_unsigned_basic_auth (Optional[bool]) – Configures the domain so that unsigned basic auth is enabled. If no master user is provided a default master user with username admin and a dynamically generated password stored in KMS is created. The password can be retrieved by getting masterUserPassword from the domain instance. Setting this to true will also add an access policy that allows unsigned access, enable node to node encryption, encryption at rest. If conflicting settings are encountered (like disabling encryption at rest) enabling this setting will cause a failure. Default: - false

  • vpc (Optional[IVpc]) – Place the domain inside this VPC. Default: - Domain is not placed in a VPC.

  • vpc_subnets (Optional[Sequence[Union[SubnetSelection, Dict[str, Any]]]]) – The specific vpc subnets the domain will be placed in. You must provide one subnet for each Availability Zone that your domain uses. For example, you must specify three subnet IDs for a three Availability Zone domain. Only used if vpc is specified. Default: - All private subnets.

  • zone_awareness (Union[ZoneAwarenessConfig, Dict[str, Any], None]) – The cluster zone awareness configuration for the Amazon OpenSearch Service domain. Default: - no zone awareness (1 AZ)

Methods

add_access_policies(*access_policy_statements)

Add policy statements to the domain access policy.

Parameters

access_policy_statements (PolicyStatement) –

Return type

None

apply_removal_policy(policy)

Apply the given removal policy to this resource.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters

policy (RemovalPolicy) –

Return type

None

grant_index_read(index, identity)

Grant read permissions for an index in this domain to an IAM principal (Role/Group/User).

Parameters
  • index (str) – The index to grant permissions for.

  • identity (IGrantable) – The principal.

Return type

Grant

grant_index_read_write(index, identity)

Grant read/write permissions for an index in this domain to an IAM principal (Role/Group/User).

Parameters
  • index (str) – The index to grant permissions for.

  • identity (IGrantable) – The principal.

Return type

Grant

grant_index_write(index, identity)

Grant write permissions for an index in this domain to an IAM principal (Role/Group/User).

Parameters
  • index (str) – The index to grant permissions for.

  • identity (IGrantable) – The principal.

Return type

Grant

grant_path_read(path, identity)

Grant read permissions for a specific path in this domain to an IAM principal (Role/Group/User).

Parameters
  • path (str) – The path to grant permissions for.

  • identity (IGrantable) – The principal.

Return type

Grant

grant_path_read_write(path, identity)

Grant read/write permissions for a specific path in this domain to an IAM principal (Role/Group/User).

Parameters
  • path (str) – The path to grant permissions for.

  • identity (IGrantable) – The principal.

Return type

Grant

grant_path_write(path, identity)

Grant write permissions for a specific path in this domain to an IAM principal (Role/Group/User).

Parameters
  • path (str) – The path to grant permissions for.

  • identity (IGrantable) – The principal.

Return type

Grant

grant_read(identity)

Grant read permissions for this domain and its contents to an IAM principal (Role/Group/User).

Parameters

identity (IGrantable) – The principal.

Return type

Grant

grant_read_write(identity)

Grant read/write permissions for this domain and its contents to an IAM principal (Role/Group/User).

Parameters

identity (IGrantable) – The principal.

Return type

Grant

grant_write(identity)

Grant write permissions for this domain and its contents to an IAM principal (Role/Group/User).

Parameters

identity (IGrantable) – The principal.

Return type

Grant

metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Return the given named metric for this domain.

Parameters
  • metric_name (str) –

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type

Metric

metric_automated_snapshot_failure(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for automated snapshot failures.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_cluster_index_writes_blocked(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the cluster blocking index writes.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 1 minute

Return type

Metric

metric_cluster_status_red(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the time the cluster status is red.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_cluster_status_yellow(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the time the cluster status is yellow.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_cpu_utilization(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for CPU utilization.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_free_storage_space(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the storage space of nodes in the cluster.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

minimum over 5 minutes

Return type

Metric

metric_indexing_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for indexing latency.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

p99 over 5 minutes

Return type

Metric

metric_jvm_memory_pressure(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for JVM memory pressure.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_kms_key_error(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for KMS key errors.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_kms_key_inaccessible(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for KMS key being inaccessible.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_master_cpu_utilization(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for master CPU utilization.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_master_jvm_memory_pressure(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for master JVM memory pressure.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

metric_nodes(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the number of nodes.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

minimum over 1 hour

Return type

Metric

metric_search_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for search latency.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

p99 over 5 minutes

Return type

Metric

metric_searchable_documents(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for number of searchable documents.

Parameters
  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default

maximum over 5 minutes

Return type

Metric

to_string()

Returns a string representation of this construct.

Return type

str

Attributes

app_log_group

Log group that application logs are logged to.

Attribute

true

Return type

Optional[ILogGroup]

audit_log_group

Log group that audit logs are logged to.

Attribute

true

Return type

Optional[ILogGroup]

connections

Manages network connections to the domain.

This will throw an error in case the domain is not placed inside a VPC.

Return type

Connections

domain_arn

Arn of the Amazon OpenSearch Service domain.

Return type

str

domain_endpoint

Endpoint of the Amazon OpenSearch Service domain.

Return type

str

domain_id

Identifier of the Amazon OpenSearch Service domain.

Return type

str

domain_name

Domain name of the Amazon OpenSearch Service domain.

Return type

str

env

The environment this resource belongs to.

For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.

Return type

ResourceEnvironment

master_user_password

Master user password if fine grained access control is configured.

Return type

Optional[SecretValue]

node

The tree node.

Return type

Node

slow_index_log_group

Log group that slow indices are logged to.

Attribute

true

Return type

Optional[ILogGroup]

slow_search_log_group

Log group that slow searches are logged to.

Attribute

true

Return type

Optional[ILogGroup]

stack

The stack in which this resource is defined.

Return type

Stack

Static Methods

classmethod from_domain_attributes(scope, id, *, domain_arn, domain_endpoint)

Creates a domain construct that represents an external domain.

Parameters
  • scope (Construct) – The parent creating construct (usually this).

  • id (str) – The construct’s name.

  • domain_arn (str) – The ARN of the Amazon OpenSearch Service domain.

  • domain_endpoint (str) – The domain endpoint of the Amazon OpenSearch Service domain.

Return type

IDomain

classmethod from_domain_endpoint(scope, id, domain_endpoint)

Creates a domain construct that represents an external domain via domain endpoint.

Parameters
  • scope (Construct) – The parent creating construct (usually this).

  • id (str) – The construct’s name.

  • domain_endpoint (str) – The domain’s endpoint.

Return type

IDomain

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters

x (Any) – Any object.

Return type

bool

Returns

true if x is an object created from a class which extends Construct.

classmethod is_owned_resource(construct)

Returns true if the construct was created by CDK, and false otherwise.

Parameters

construct (IConstruct) –

Return type

bool

classmethod is_resource(construct)

Check whether the given construct is a Resource.

Parameters

construct (IConstruct) –

Return type

bool